Increase glcd refresh rate to 10Hz
[clinton/Smoothieware.git] / src / modules / robot /
2013-08-01 Jim MorrisMerge pull request #204 from wolfmanjm/feature/rrd...
2013-08-01 Jim Morriscap speed override to not less than 1%
2013-07-18 Logxenrevert to pre-actuator state
2013-07-06 Arthur Wolfmoving all modules to use Actuator instead of StepperMo...
2013-07-06 Arthur Wolfmoving StepperMotor.h to actuators/
2013-06-27 LogxenMerge branch 'edge' into smoothiepanel
2013-06-26 Jim MorrisMerge pull request #191 from wolfmanjm/fix/m17-m18
2013-06-26 Jim MorrisFix M17/M18/M84
2013-06-23 Jim MorrisMerge pull request #183 from wolfmanjm/add/panel
2013-06-23 Jim Morrisfix tab to space
2013-06-23 Jim MorrisAdded new Panel stuff
2013-06-22 Jim MorrisMerge pull request #182 from wolfmanjm/add/johann-kosse...
2013-06-22 Jim Morrisadd Johanns Marlin solution to the arm solutions, basic...
2013-06-21 Logxenfixed PlayLed functionality as per arthur's recomendation
2013-06-19 Jim MorrisMerge pull request #179 from mitchese/fix/mintemp-error
2013-06-19 Jim Morrisadd break to M 204
2013-06-19 Jim MorrisMerge pull request #180 from wolfmanjm/feature/m206
2013-06-19 Jim Morrisadd M206 Snnn to change acceleration on the fly as...
2013-06-12 Jim MorrisMerge branch 'upstreamedge' into fix/version-makefile
2013-06-11 Jim MorrisMerge pull request #172 from wolfmanjm/feature/get_publ...
2013-06-08 Jim Morriswhitespace conversion tab -> space
2013-06-08 Jim MorrisAdd public data access to robot for current override...
2013-06-07 Jim MorrisMerge remote-tracking branch 'upstream/edge' into featu...
2013-06-07 Jim MorrisMove where the checksums are defined for public access
2013-05-25 arthurwolfMerge pull request #167 from powertomato/feature/touchprobe
2013-05-23 Stefan KruljFixed a bug regarding absolute/relative movment during...
2013-05-22 Stefan KruljRewritten Touchprobe module to use Stepper-objects...
2013-05-21 Stefan KruljCompletely moved the motion part of G31 to Robot, still...
2013-05-18 Stefan KruljMerge branch 'edge' of git://github.com/arthurwolf...
2013-05-13 Michael MoonMerge remote-tracking branch 'fix/USBMSD' into edge
2013-05-08 Michael Moonstrip utf8 nbsp from comments
2013-05-08 Michael MoonMerge pull request #165 from dandumit/edge
2013-05-07 Michael MoonRobot & Extruder: enable pins are no longer open drain...
2013-05-04 Daniel Dumitrureport error message when a command was not taken
2013-04-30 Michael MoonRobot: fix G20 (inches) mode
2013-04-22 Jim MorrisMerge remote-tracking branch 'upstream/edge' into fix...
2013-04-16 Arthur Wolfadding comments to modules/
2013-04-16 Arthur Wolfremoving more debug pins
2013-04-15 Arthur WolfMerge branch 'edge' into accel
2013-04-15 Arthur Wolftrying something. hopefully that can be a temp fix...
2013-04-07 Arthur Wolfshould make it work in octoprint
2013-03-27 Arthur WolfMerge branch 'edge' into accel
2013-03-25 LogxenMerge pull request #152 from logxen/hbot
2013-03-25 LogxenInitial commit of HBotSolution
2013-03-17 Arthur Wolfextruder now creates its own blocks
2013-03-16 Arthur Wolffixing merge conflict
2013-03-15 Arthur WolfMerge branch 'edge' into extruderfix
2013-03-11 LogxenMerge remote-tracking branch 'upstream/edge' into firmc...
2013-03-07 Michael MoonMerge pull request #147 from bgamari/fixes
2013-03-06 Ben GamariStepper: minimum_steps_per_minute should be unsigned
2013-03-06 Ben GamariBaseSolution: Needed a virtual destructor
2013-03-06 Arthur Wolfcompiles and does not crash
2013-03-06 Arthur Wolfdoes not commit yet, but getting close
2013-03-06 Arthur Wolfthis commit does not compile, commiting to get help...
2013-03-06 Arthur Wolfwas not supposed to be false
2013-03-05 Arthur Wolffixing merge conflicts when merging edge back in
2013-03-05 Arthur Wolfmost probably corrected the Extruder bug, which was...
2013-03-05 LogxenMerge remote-tracking branch 'upstream/edge' into firmc...
2013-03-04 arthurwolfMerge pull request #144 from wolfmanjm/feature/delta...
2013-03-04 Jim MorrisImplement Johanns method of specifying segments for...
2013-03-04 Jim MorrisImplement Johanns method of specifying segments for...
2013-03-02 Arthur WolfMerge branch 'edge' of github.com:arthurwolf/Smoothie...
2013-03-02 Arthur Wolfmove back to get_ref in conveyors flush
2013-03-02 Arthur WolfMerge branch 'edge' into extruderfix
2013-03-02 Arthur Wolfmade Extruder create its own blocks for solo moves...
2013-03-02 Adam GreenMerge remote-tracking branch 'origin/edge' into feature...
2013-03-01 Adam GreenMerge remote-tracking branch 'origin/edge' into feature...
2013-02-26 Michael MoonConveyor: use get_tail_ref
2013-02-25 LogxenMerge pull request #139 from logxen/edge
2013-02-25 Logxenmade Conveyor::wait_for_empty_queue() actually return
2013-02-25 LogxenMerge pull request #138 from logxen/edge
2013-02-25 Logxenadded '{' to fix the new Conveyor::wait_for_empty_queue...
2013-02-25 LogxenMerge pull request #136 from bgamari/fix-homing
2013-02-25 LogxenMerge pull request #135 from wolfmanjm/feature/add...
2013-02-25 Ben GamariConveyor: Introduce wait_for_empty_queue
2013-02-21 Adam GreenFixes issue #129 - Don't leak gcodes in block.
2013-02-21 Adam GreenMerge remote-tracking branch 'origin/fix/USBSerial...
2013-02-21 Ben GamariMerge pull request #118 from bgamari/temp-no-irq
2013-02-20 Arthur WolfMerge branch 'edge' of github.com:arthurwolf/Smoothie...
2013-02-20 Arthur WolfPossible problem with the way Conveyor takes and releas...
2013-02-20 LogxenMerge pull request #134 from wolfmanjm/optimization...
2013-02-20 Jim Morrisremove timing code
2013-02-20 Jim MorrisSwitch rostock arm solution to use floats, fastmath...
2013-02-18 Adam GreenMerge remote-tracking branch 'origin/edge' into track_a...
2013-02-18 LogxenMerge pull request #128 from logxen/edge
2013-02-18 Logxenfixed merge error from the rename of Conveyor
2013-02-18 Adam GreenMerge branch 'edge' into track_allocs
2013-02-17 arthurwolfMerge pull request #124 from logxen/onboot
2013-02-17 LogxenMerge branch 'edge' into onboot
2013-02-17 LogxenMerge branch 'edge' into onboot
2013-02-17 LogxenMerge branch 'edge' into onboot
2013-02-16 LogxenMerge branch 'edge' into debugbreak
2013-02-16 LogxenMerge branch 'edge' into button
2013-02-16 LogxenMerge pull request #117 from logxen/edge
2013-02-16 Logxenupdated rostock config defaults in code
2013-02-15 arthurwolfMerge pull request #114 from orcinus/HomingDirection
2013-02-15 LogxenMerge pull request #115 from logxen/rotatedcartesian
2013-02-15 Logxenadded RotatableCartesionSolution.h to Robot.cpp
2013-02-15 LogxenMerge branch 'edge' into rotatedcartesian
2013-02-15 LogxenMerge pull request #112 from logxen/edge
next