Change the argument order of 'set-fields' to match that of 'set-fields'.

[bpt/guile.git] / doc / ref / srfi-modules.texi

@c -*-texinfo-*-
@c This is part of the GNU Guile Reference Manual.
@c Copyright (C)  1996, 1997, 2000, 2001, 2002, 2003, 2004, 2006, 2007, 2008, 2009, 2010, 2011, 2012
@c   Free Software Foundation, Inc.
@c See the file guile.texi for copying conditions.

@node SRFI Support
@section SRFI Support Modules
@cindex SRFI

SRFI is an acronym for Scheme Request For Implementation.  The SRFI
documents define a lot of syntactic and procedure extensions to standard
Scheme as defined in R5RS.

Guile has support for a number of SRFIs.  This chapter gives an overview
over the available SRFIs and some usage hints.  For complete
documentation, design rationales and further examples, we advise you to
get the relevant SRFI documents from the SRFI home page
@url{http://srfi.schemers.org/}.

@menu
* About SRFI Usage::            What to know about Guile's SRFI support.
* SRFI-0::                      cond-expand
* SRFI-1::                      List library.
* SRFI-2::                      and-let*.
* SRFI-4::                      Homogeneous numeric vector datatypes.
* SRFI-6::                      Basic String Ports.
* SRFI-8::                      receive.
* SRFI-9::                      define-record-type.
* SRFI-10::                     Hash-Comma Reader Extension.
* SRFI-11::                     let-values and let*-values.
* SRFI-13::                     String library.
* SRFI-14::                     Character-set library.
* SRFI-16::                     case-lambda
* SRFI-17::                     Generalized set!
* SRFI-18::                     Multithreading support
* SRFI-19::                     Time/Date library.
* SRFI-23::                     Error reporting
* SRFI-26::                     Specializing parameters
* SRFI-27::                     Sources of Random Bits
* SRFI-30::                     Nested multi-line block comments
* SRFI-31::                     A special form `rec' for recursive evaluation
* SRFI-34::                     Exception handling.
* SRFI-35::                     Conditions.
* SRFI-37::                     args-fold program argument processor
* SRFI-38::                     External Representation for Data With Shared Structure
* SRFI-39::                     Parameter objects
* SRFI-42::                     Eager comprehensions
* SRFI-45::                     Primitives for expressing iterative lazy algorithms
* SRFI-55::                     Requiring Features.
* SRFI-60::                     Integers as bits.
* SRFI-61::                     A more general `cond' clause
* SRFI-67::                     Compare procedures
* SRFI-69::                     Basic hash tables.
* SRFI-88::                     Keyword objects.
* SRFI-98::                     Accessing environment variables.
* SRFI-105::                    Curly-infix expressions.
@end menu


@node About SRFI Usage
@subsection About SRFI Usage

@c FIXME::martin: Review me!

SRFI support in Guile is currently implemented partly in the core
library, and partly as add-on modules.  That means that some SRFIs are
automatically available when the interpreter is started, whereas the
other SRFIs require you to use the appropriate support module
explicitly.

There are several reasons for this inconsistency.  First, the feature
checking syntactic form @code{cond-expand} (@pxref{SRFI-0}) must be
available immediately, because it must be there when the user wants to
check for the Scheme implementation, that is, before she can know that
it is safe to use @code{use-modules} to load SRFI support modules.  The
second reason is that some features defined in SRFIs had been
implemented in Guile before the developers started to add SRFI
implementations as modules (for example SRFI-6 (@pxref{SRFI-6})).  In
the future, it is possible that SRFIs in the core library might be
factored out into separate modules, requiring explicit module loading
when they are needed.  So you should be prepared to have to use
@code{use-modules} someday in the future to access SRFI-6 bindings.  If
you want, you can do that already.  We have included the module
@code{(srfi srfi-6)} in the distribution, which currently does nothing,
but ensures that you can write future-safe code.

Generally, support for a specific SRFI is made available by using
modules named @code{(srfi srfi-@var{number})}, where @var{number} is the
number of the SRFI needed.  Another possibility is to use the command
line option @code{--use-srfi}, which will load the necessary modules
automatically (@pxref{Invoking Guile}).


@node SRFI-0
@subsection SRFI-0 - cond-expand
@cindex SRFI-0

This SRFI lets a portable Scheme program test for the presence of
certain features, and adapt itself by using different blocks of code,
or fail if the necessary features are not available.  There's no
module to load, this is in the Guile core.

A program designed only for Guile will generally not need this
mechanism, such a program can of course directly use the various
documented parts of Guile.

@deffn syntax cond-expand (feature body@dots{}) @dots{}
Expand to the @var{body} of the first clause whose @var{feature}
specification is satisfied.  It is an error if no @var{feature} is
satisfied.

Features are symbols such as @code{srfi-1}, and a feature
specification can use @code{and}, @code{or} and @code{not} forms to
test combinations.  The last clause can be an @code{else}, to be used
if no other passes.

For example, define a private version of @code{alist-cons} if SRFI-1
is not available.

@example
(cond-expand (srfi-1
              )
             (else
              (define (alist-cons key val alist)
                (cons (cons key val) alist))))
@end example

Or demand a certain set of SRFIs (list operations, string ports,
@code{receive} and string operations), failing if they're not
available.

@example
(cond-expand ((and srfi-1 srfi-6 srfi-8 srfi-13)
              ))
@end example
@end deffn

@noindent
The Guile core has the following features,

@example
guile
guile-2  ;; starting from Guile 2.x
r5rs
srfi-0
srfi-4
srfi-6
srfi-13
srfi-14
@end example

Other SRFI feature symbols are defined once their code has been loaded
with @code{use-modules}, since only then are their bindings available.

The @samp{--use-srfi} command line option (@pxref{Invoking Guile}) is
a good way to load SRFIs to satisfy @code{cond-expand} when running a
portable program.

Testing the @code{guile} feature allows a program to adapt itself to
the Guile module system, but still run on other Scheme systems.  For
example the following demands SRFI-8 (@code{receive}), but also knows
how to load it with the Guile mechanism.

@example
(cond-expand (srfi-8
              )
             (guile
              (use-modules (srfi srfi-8))))
@end example

@cindex @code{guile-2} SRFI-0 feature
@cindex portability between 2.0 and older versions
Likewise, testing the @code{guile-2} feature allows code to be portable
between Guile 2.0 and previous versions of Guile.  For instance, it
makes it possible to write code that accounts for Guile 2.0's compiler,
yet be correctly interpreted on 1.8 and earlier versions:

@example
(cond-expand (guile-2 (eval-when (compile)
                        ;; This must be evaluated at compile time.
                        (fluid-set! current-reader my-reader)))
             (guile
                      ;; Earlier versions of Guile do not have a
                      ;; separate compilation phase.
                      (fluid-set! current-reader my-reader)))
@end example

It should be noted that @code{cond-expand} is separate from the
@code{*features*} mechanism (@pxref{Feature Tracking}), feature
symbols in one are unrelated to those in the other.


@node SRFI-1
@subsection SRFI-1 - List library
@cindex SRFI-1
@cindex list

@c FIXME::martin: Review me!

The list library defined in SRFI-1 contains a lot of useful list
processing procedures for construction, examining, destructuring and
manipulating lists and pairs.

Since SRFI-1 also defines some procedures which are already contained
in R5RS and thus are supported by the Guile core library, some list
and pair procedures which appear in the SRFI-1 document may not appear
in this section.  So when looking for a particular list/pair
processing procedure, you should also have a look at the sections
@ref{Lists} and @ref{Pairs}.

@menu
* SRFI-1 Constructors::         Constructing new lists.
* SRFI-1 Predicates::           Testing list for specific properties.
* SRFI-1 Selectors::            Selecting elements from lists.
* SRFI-1 Length Append etc::    Length calculation and list appending.
* SRFI-1 Fold and Map::         Higher-order list processing.
* SRFI-1 Filtering and Partitioning::  Filter lists based on predicates.
* SRFI-1 Searching::            Search for elements.
* SRFI-1 Deleting::             Delete elements from lists.
* SRFI-1 Association Lists::    Handle association lists.
* SRFI-1 Set Operations::       Use lists for representing sets.
@end menu

@node SRFI-1 Constructors
@subsubsection Constructors
@cindex list constructor

@c FIXME::martin: Review me!

New lists can be constructed by calling one of the following
procedures.

@deffn {Scheme Procedure} xcons d a
Like @code{cons}, but with interchanged arguments.  Useful mostly when
passed to higher-order procedures.
@end deffn

@deffn {Scheme Procedure} list-tabulate n init-proc
Return an @var{n}-element list, where each list element is produced by
applying the procedure @var{init-proc} to the corresponding list
index.  The order in which @var{init-proc} is applied to the indices
is not specified.
@end deffn

@deffn {Scheme Procedure} list-copy lst
Return a new list containing the elements of the list @var{lst}.

This function differs from the core @code{list-copy} (@pxref{List
Constructors}) in accepting improper lists too.  And if @var{lst} is
not a pair at all then it's treated as the final tail of an improper
list and simply returned.
@end deffn

@deffn {Scheme Procedure} circular-list elt1 elt2 @dots{}
Return a circular list containing the given arguments @var{elt1}
@var{elt2} @dots{}.
@end deffn

@deffn {Scheme Procedure} iota count [start step]
Return a list containing @var{count} numbers, starting from
@var{start} and adding @var{step} each time.  The default @var{start}
is 0, the default @var{step} is 1.  For example,

@example
(iota 6)        @result{} (0 1 2 3 4 5)
(iota 4 2.5 -2) @result{} (2.5 0.5 -1.5 -3.5)
@end example

This function takes its name from the corresponding primitive in the
APL language.
@end deffn


@node SRFI-1 Predicates
@subsubsection Predicates
@cindex list predicate

@c FIXME::martin: Review me!

The procedures in this section test specific properties of lists.

@deffn {Scheme Procedure} proper-list? obj
Return @code{#t} if @var{obj} is a proper list, or @code{#f}
otherwise.  This is the same as the core @code{list?} (@pxref{List
Predicates}).

A proper list is a list which ends with the empty list @code{()} in
the usual way.  The empty list @code{()} itself is a proper list too.

@example
(proper-list? '(1 2 3))  @result{} #t
(proper-list? '())       @result{} #t
@end example
@end deffn

@deffn {Scheme Procedure} circular-list? obj
Return @code{#t} if @var{obj} is a circular list, or @code{#f}
otherwise.

A circular list is a list where at some point the @code{cdr} refers
back to a previous pair in the list (either the start or some later
point), so that following the @code{cdr}s takes you around in a
circle, with no end.

@example
(define x (list 1 2 3 4))
(set-cdr! (last-pair x) (cddr x))
x @result{} (1 2 3 4 3 4 3 4 ...)
(circular-list? x)  @result{} #t
@end example
@end deffn

@deffn {Scheme Procedure} dotted-list? obj
Return @code{#t} if @var{obj} is a dotted list, or @code{#f}
otherwise.

A dotted list is a list where the @code{cdr} of the last pair is not
the empty list @code{()}.  Any non-pair @var{obj} is also considered a
dotted list, with length zero.

@example
(dotted-list? '(1 2 . 3))  @result{} #t
(dotted-list? 99)          @result{} #t
@end example
@end deffn

It will be noted that any Scheme object passes exactly one of the
above three tests @code{proper-list?}, @code{circular-list?} and
@code{dotted-list?}.  Non-lists are @code{dotted-list?}, finite lists
are either @code{proper-list?} or @code{dotted-list?}, and infinite
lists are @code{circular-list?}.

@sp 1
@deffn {Scheme Procedure} null-list? lst
Return @code{#t} if @var{lst} is the empty list @code{()}, @code{#f}
otherwise.  If something else than a proper or circular list is passed
as @var{lst}, an error is signalled.  This procedure is recommended
for checking for the end of a list in contexts where dotted lists are
not allowed.
@end deffn

@deffn {Scheme Procedure} not-pair? obj
Return @code{#t} is @var{obj} is not a pair, @code{#f} otherwise.
This is shorthand notation @code{(not (pair? @var{obj}))} and is
supposed to be used for end-of-list checking in contexts where dotted
lists are allowed.
@end deffn

@deffn {Scheme Procedure} list= elt= list1 @dots{}
Return @code{#t} if all argument lists are equal, @code{#f} otherwise.
List equality is determined by testing whether all lists have the same
length and the corresponding elements are equal in the sense of the
equality predicate @var{elt=}.  If no or only one list is given,
@code{#t} is returned.
@end deffn


@node SRFI-1 Selectors
@subsubsection Selectors
@cindex list selector

@c FIXME::martin: Review me!

@deffn {Scheme Procedure} first pair
@deffnx {Scheme Procedure} second pair
@deffnx {Scheme Procedure} third pair
@deffnx {Scheme Procedure} fourth pair
@deffnx {Scheme Procedure} fifth pair
@deffnx {Scheme Procedure} sixth pair
@deffnx {Scheme Procedure} seventh pair
@deffnx {Scheme Procedure} eighth pair
@deffnx {Scheme Procedure} ninth pair
@deffnx {Scheme Procedure} tenth pair
These are synonyms for @code{car}, @code{cadr}, @code{caddr}, @dots{}.
@end deffn

@deffn {Scheme Procedure} car+cdr pair
Return two values, the @sc{car} and the @sc{cdr} of @var{pair}.
@end deffn

@deffn {Scheme Procedure} take lst i
@deffnx {Scheme Procedure} take! lst i
Return a list containing the first @var{i} elements of @var{lst}.

@code{take!} may modify the structure of the argument list @var{lst}
in order to produce the result.
@end deffn

@deffn {Scheme Procedure} drop lst i
Return a list containing all but the first @var{i} elements of
@var{lst}.
@end deffn

@deffn {Scheme Procedure} take-right lst i
Return a list containing the @var{i} last elements of @var{lst}.
The return shares a common tail with @var{lst}.
@end deffn

@deffn {Scheme Procedure} drop-right lst i
@deffnx {Scheme Procedure} drop-right! lst i
Return a list containing all but the @var{i} last elements of
@var{lst}.

@code{drop-right} always returns a new list, even when @var{i} is
zero.  @code{drop-right!} may modify the structure of the argument
list @var{lst} in order to produce the result.
@end deffn

@deffn {Scheme Procedure} split-at lst i
@deffnx {Scheme Procedure} split-at! lst i
Return two values, a list containing the first @var{i} elements of the
list @var{lst} and a list containing the remaining elements.

@code{split-at!} may modify the structure of the argument list
@var{lst} in order to produce the result.
@end deffn

@deffn {Scheme Procedure} last lst
Return the last element of the non-empty, finite list @var{lst}.
@end deffn


@node SRFI-1 Length Append etc
@subsubsection Length, Append, Concatenate, etc.

@c FIXME::martin: Review me!

@deffn {Scheme Procedure} length+ lst
Return the length of the argument list @var{lst}.  When @var{lst} is a
circular list, @code{#f} is returned.
@end deffn

@deffn {Scheme Procedure} concatenate list-of-lists
@deffnx {Scheme Procedure} concatenate! list-of-lists
Construct a list by appending all lists in @var{list-of-lists}.

@code{concatenate!} may modify the structure of the given lists in
order to produce the result.

@code{concatenate} is the same as @code{(apply append
@var{list-of-lists})}.  It exists because some Scheme implementations
have a limit on the number of arguments a function takes, which the
@code{apply} might exceed.  In Guile there is no such limit.
@end deffn

@deffn {Scheme Procedure} append-reverse rev-head tail
@deffnx {Scheme Procedure} append-reverse! rev-head tail
Reverse @var{rev-head}, append @var{tail} to it, and return the
result.  This is equivalent to @code{(append (reverse @var{rev-head})
@var{tail})}, but its implementation is more efficient.

@example
(append-reverse '(1 2 3) '(4 5 6)) @result{} (3 2 1 4 5 6)
@end example

@code{append-reverse!} may modify @var{rev-head} in order to produce
the result.
@end deffn

@deffn {Scheme Procedure} zip lst1 lst2 @dots{}
Return a list as long as the shortest of the argument lists, where
each element is a list.  The first list contains the first elements of
the argument lists, the second list contains the second elements, and
so on.
@end deffn

@deffn {Scheme Procedure} unzip1 lst
@deffnx {Scheme Procedure} unzip2 lst
@deffnx {Scheme Procedure} unzip3 lst
@deffnx {Scheme Procedure} unzip4 lst
@deffnx {Scheme Procedure} unzip5 lst
@code{unzip1} takes a list of lists, and returns a list containing the
first elements of each list, @code{unzip2} returns two lists, the
first containing the first elements of each lists and the second
containing the second elements of each lists, and so on.
@end deffn

@deffn {Scheme Procedure} count pred lst1 lst2 @dots{}
Return a count of the number of times @var{pred} returns true when
called on elements from the given lists.

@var{pred} is called with @var{N} parameters @code{(@var{pred}
@var{elem1} @dots{} @var{elemN} )}, each element being from the
corresponding list.  The first call is with the first element of each
list, the second with the second element from each, and so on.

Counting stops when the end of the shortest list is reached.  At least
one list must be non-circular.
@end deffn


@node SRFI-1 Fold and Map
@subsubsection Fold, Unfold & Map
@cindex list fold
@cindex list map

@c FIXME::martin: Review me!

@deffn {Scheme Procedure} fold proc init lst1 lst2 @dots{}
@deffnx {Scheme Procedure} fold-right proc init lst1 lst2 @dots{}
Apply @var{proc} to the elements of @var{lst1} @var{lst2} @dots{} to
build a result, and return that result.

Each @var{proc} call is @code{(@var{proc} @var{elem1} @var{elem2}
@dots{}  @var{previous})}, where @var{elem1} is from @var{lst1},
@var{elem2} is from @var{lst2}, and so on.  @var{previous} is the return
from the previous call to @var{proc}, or the given @var{init} for the
first call.  If any list is empty, just @var{init} is returned.

@code{fold} works through the list elements from first to last.  The
following shows a list reversal and the calls it makes,

@example
(fold cons '() '(1 2 3))

(cons 1 '())
(cons 2 '(1))
(cons 3 '(2 1)
@result{} (3 2 1)
@end example

@code{fold-right} works through the list elements from last to first,
ie.@: from the right.  So for example the following finds the longest
string, and the last among equal longest,

@example
(fold-right (lambda (str prev)
              (if (> (string-length str) (string-length prev))
                  str
                  prev))
            ""
            '("x" "abc" "xyz" "jk"))
@result{} "xyz"
@end example

If @var{lst1} @var{lst2} @dots{} have different lengths, @code{fold}
stops when the end of the shortest is reached; @code{fold-right}
commences at the last element of the shortest.  Ie.@: elements past the
length of the shortest are ignored in the other @var{lst}s.  At least
one @var{lst} must be non-circular.

@code{fold} should be preferred over @code{fold-right} if the order of
processing doesn't matter, or can be arranged either way, since
@code{fold} is a little more efficient.

The way @code{fold} builds a result from iterating is quite general,
it can do more than other iterations like say @code{map} or
@code{filter}.  The following for example removes adjacent duplicate
elements from a list,

@example
(define (delete-adjacent-duplicates lst)
  (fold-right (lambda (elem ret)
                (if (equal? elem (first ret))
                    ret
                    (cons elem ret)))
              (list (last lst))
              lst))
(delete-adjacent-duplicates '(1 2 3 3 4 4 4 5))
@result{} (1 2 3 4 5)
@end example

Clearly the same sort of thing can be done with a @code{for-each} and
a variable in which to build the result, but a self-contained
@var{proc} can be re-used in multiple contexts, where a
@code{for-each} would have to be written out each time.
@end deffn

@deffn {Scheme Procedure} pair-fold proc init lst1 lst2 @dots{}
@deffnx {Scheme Procedure} pair-fold-right proc init lst1 lst2 @dots{}
The same as @code{fold} and @code{fold-right}, but apply @var{proc} to
the pairs of the lists instead of the list elements.
@end deffn

@deffn {Scheme Procedure} reduce proc default lst
@deffnx {Scheme Procedure} reduce-right proc default lst
@code{reduce} is a variant of @code{fold}, where the first call to
@var{proc} is on two elements from @var{lst}, rather than one element
and a given initial value.

If @var{lst} is empty, @code{reduce} returns @var{default} (this is
the only use for @var{default}).  If @var{lst} has just one element
then that's the return value.  Otherwise @var{proc} is called on the
elements of @var{lst}.

Each @var{proc} call is @code{(@var{proc} @var{elem} @var{previous})},
where @var{elem} is from @var{lst} (the second and subsequent elements
of @var{lst}), and @var{previous} is the return from the previous call
to @var{proc}.  The first element of @var{lst} is the @var{previous}
for the first call to @var{proc}.

For example, the following adds a list of numbers, the calls made to
@code{+} are shown.  (Of course @code{+} accepts multiple arguments
and can add a list directly, with @code{apply}.)

@example
(reduce + 0 '(5 6 7)) @result{} 18

(+ 6 5)  @result{} 11
(+ 7 11) @result{} 18
@end example

@code{reduce} can be used instead of @code{fold} where the @var{init}
value is an ``identity'', meaning a value which under @var{proc}
doesn't change the result, in this case 0 is an identity since
@code{(+ 5 0)} is just 5.  @code{reduce} avoids that unnecessary call.

@code{reduce-right} is a similar variation on @code{fold-right},
working from the end (ie.@: the right) of @var{lst}.  The last element
of @var{lst} is the @var{previous} for the first call to @var{proc},
and the @var{elem} values go from the second last.

@code{reduce} should be preferred over @code{reduce-right} if the
order of processing doesn't matter, or can be arranged either way,
since @code{reduce} is a little more efficient.
@end deffn

@deffn {Scheme Procedure} unfold p f g seed [tail-gen]
@code{unfold} is defined as follows:

@lisp
(unfold p f g seed) =
   (if (p seed) (tail-gen seed)
       (cons (f seed)
             (unfold p f g (g seed))))
@end lisp

@table @var
@item p
Determines when to stop unfolding.

@item f
Maps each seed value to the corresponding list element.

@item g
Maps each seed value to next seed value.

@item seed
The state value for the unfold.

@item tail-gen
Creates the tail of the list; defaults to @code{(lambda (x) '())}.
@end table

@var{g} produces a series of seed values, which are mapped to list
elements by @var{f}.  These elements are put into a list in
left-to-right order, and @var{p} tells when to stop unfolding.
@end deffn

@deffn {Scheme Procedure} unfold-right p f g seed [tail]
Construct a list with the following loop.

@lisp
(let lp ((seed seed) (lis tail))
   (if (p seed) lis
       (lp (g seed)
           (cons (f seed) lis))))
@end lisp

@table @var
@item p
Determines when to stop unfolding.

@item f
Maps each seed value to the corresponding list element.

@item g
Maps each seed value to next seed value.

@item seed
The state value for the unfold.

@item tail-gen
Creates the tail of the list; defaults to @code{(lambda (x) '())}.
@end table

@end deffn

@deffn {Scheme Procedure} map f lst1 lst2 @dots{}
Map the procedure over the list(s) @var{lst1}, @var{lst2}, @dots{} and
return a list containing the results of the procedure applications.
This procedure is extended with respect to R5RS, because the argument
lists may have different lengths.  The result list will have the same
length as the shortest argument lists.  The order in which @var{f}
will be applied to the list element(s) is not specified.
@end deffn

@deffn {Scheme Procedure} for-each f lst1 lst2 @dots{}
Apply the procedure @var{f} to each pair of corresponding elements of
the list(s) @var{lst1}, @var{lst2}, @dots{}.  The return value is not
specified.  This procedure is extended with respect to R5RS, because
the argument lists may have different lengths.  The shortest argument
list determines the number of times @var{f} is called.  @var{f} will
be applied to the list elements in left-to-right order.

@end deffn

@deffn {Scheme Procedure} append-map f lst1 lst2 @dots{}
@deffnx {Scheme Procedure} append-map! f lst1 lst2 @dots{}
Equivalent to

@lisp
(apply append (map f clist1 clist2 ...))
@end lisp

and

@lisp
(apply append! (map f clist1 clist2 ...))
@end lisp

Map @var{f} over the elements of the lists, just as in the @code{map}
function. However, the results of the applications are appended
together to make the final result. @code{append-map} uses
@code{append} to append the results together; @code{append-map!} uses
@code{append!}.

The dynamic order in which the various applications of @var{f} are
made is not specified.
@end deffn

@deffn {Scheme Procedure} map! f lst1 lst2 @dots{}
Linear-update variant of @code{map} -- @code{map!} is allowed, but not
required, to alter the cons cells of @var{lst1} to construct the
result list.

The dynamic order in which the various applications of @var{f} are
made is not specified. In the n-ary case, @var{lst2}, @var{lst3},
@dots{} must have at least as many elements as @var{lst1}.
@end deffn

@deffn {Scheme Procedure} pair-for-each f lst1 lst2 @dots{}
Like @code{for-each}, but applies the procedure @var{f} to the pairs
from which the argument lists are constructed, instead of the list
elements.  The return value is not specified.
@end deffn

@deffn {Scheme Procedure} filter-map f lst1 lst2 @dots{}
Like @code{map}, but only results from the applications of @var{f}
which are true are saved in the result list.
@end deffn


@node SRFI-1 Filtering and Partitioning
@subsubsection Filtering and Partitioning
@cindex list filter
@cindex list partition

@c FIXME::martin: Review me!

Filtering means to collect all elements from a list which satisfy a
specific condition.  Partitioning a list means to make two groups of
list elements, one which contains the elements satisfying a condition,
and the other for the elements which don't.

The @code{filter} and @code{filter!} functions are implemented in the
Guile core, @xref{List Modification}.

@deffn {Scheme Procedure} partition pred lst
@deffnx {Scheme Procedure} partition! pred lst
Split @var{lst} into those elements which do and don't satisfy the
predicate @var{pred}.

The return is two values (@pxref{Multiple Values}), the first being a
list of all elements from @var{lst} which satisfy @var{pred}, the
second a list of those which do not.

The elements in the result lists are in the same order as in @var{lst}
but the order in which the calls @code{(@var{pred} elem)} are made on
the list elements is unspecified.

@code{partition} does not change @var{lst}, but one of the returned
lists may share a tail with it.  @code{partition!} may modify
@var{lst} to construct its return.
@end deffn

@deffn {Scheme Procedure} remove pred lst
@deffnx {Scheme Procedure} remove! pred lst
Return a list containing all elements from @var{lst} which do not
satisfy the predicate @var{pred}.  The elements in the result list
have the same order as in @var{lst}.  The order in which @var{pred} is
applied to the list elements is not specified.

@code{remove!} is allowed, but not required to modify the structure of
the input list.
@end deffn


@node SRFI-1 Searching
@subsubsection Searching
@cindex list search

@c FIXME::martin: Review me!

The procedures for searching elements in lists either accept a
predicate or a comparison object for determining which elements are to
be searched.

@deffn {Scheme Procedure} find pred lst
Return the first element of @var{lst} which satisfies the predicate
@var{pred} and @code{#f} if no such element is found.
@end deffn

@deffn {Scheme Procedure} find-tail pred lst
Return the first pair of @var{lst} whose @sc{car} satisfies the
predicate @var{pred} and @code{#f} if no such element is found.
@end deffn

@deffn {Scheme Procedure} take-while pred lst
@deffnx {Scheme Procedure} take-while! pred lst
Return the longest initial prefix of @var{lst} whose elements all
satisfy the predicate @var{pred}.

@code{take-while!} is allowed, but not required to modify the input
list while producing the result.
@end deffn

@deffn {Scheme Procedure} drop-while pred lst
Drop the longest initial prefix of @var{lst} whose elements all
satisfy the predicate @var{pred}.
@end deffn

@deffn {Scheme Procedure} span pred lst
@deffnx {Scheme Procedure} span! pred lst
@deffnx {Scheme Procedure} break pred lst
@deffnx {Scheme Procedure} break! pred lst
@code{span} splits the list @var{lst} into the longest initial prefix
whose elements all satisfy the predicate @var{pred}, and the remaining
tail.  @code{break} inverts the sense of the predicate.

@code{span!} and @code{break!} are allowed, but not required to modify
the structure of the input list @var{lst} in order to produce the
result.

Note that the name @code{break} conflicts with the @code{break}
binding established by @code{while} (@pxref{while do}).  Applications
wanting to use @code{break} from within a @code{while} loop will need
to make a new define under a different name.
@end deffn

@deffn {Scheme Procedure} any pred lst1 lst2 @dots{}
Test whether any set of elements from @var{lst1} @var{lst2} @dots{}
satisfies @var{pred}.  If so, the return value is the return value from
the successful @var{pred} call, or if not, the return value is
@code{#f}.

If there are n list arguments, then @var{pred} must be a predicate
taking n arguments.  Each @var{pred} call is @code{(@var{pred}
@var{elem1} @var{elem2} @dots{} )} taking an element from each
@var{lst}.  The calls are made successively for the first, second, etc.
elements of the lists, stopping when @var{pred} returns non-@code{#f},
or when the end of the shortest list is reached.

The @var{pred} call on the last set of elements (i.e., when the end of
the shortest list has been reached), if that point is reached, is a
tail call.
@end deffn

@deffn {Scheme Procedure} every pred lst1 lst2 @dots{}
Test whether every set of elements from @var{lst1} @var{lst2} @dots{}
satisfies @var{pred}.  If so, the return value is the return from the
final @var{pred} call, or if not, the return value is @code{#f}.

If there are n list arguments, then @var{pred} must be a predicate
taking n arguments.  Each @var{pred} call is @code{(@var{pred}
@var{elem1} @var{elem2 @dots{}})} taking an element from each
@var{lst}.  The calls are made successively for the first, second, etc.
elements of the lists, stopping if @var{pred} returns @code{#f}, or when
the end of any of the lists is reached.

The @var{pred} call on the last set of elements (i.e., when the end of
the shortest list has been reached) is a tail call.

If one of @var{lst1} @var{lst2} @dots{}is empty then no calls to
@var{pred} are made, and the return value is @code{#t}.
@end deffn

@deffn {Scheme Procedure} list-index pred lst1 lst2 @dots{}
Return the index of the first set of elements, one from each of
@var{lst1} @var{lst2} @dots{}, which satisfies @var{pred}.

@var{pred} is called as @code{(@var{elem1} @var{elem2 @dots{}})}.
Searching stops when the end of the shortest @var{lst} is reached.
The return index starts from 0 for the first set of elements.  If no
set of elements pass, then the return value is @code{#f}.

@example
(list-index odd? '(2 4 6 9))      @result{} 3
(list-index = '(1 2 3) '(3 1 2))  @result{} #f
@end example
@end deffn

@deffn {Scheme Procedure} member x lst [=]
Return the first sublist of @var{lst} whose @sc{car} is equal to
@var{x}.  If @var{x} does not appear in @var{lst}, return @code{#f}.

Equality is determined by @code{equal?}, or by the equality predicate
@var{=} if given.  @var{=} is called @code{(= @var{x} elem)},
ie.@: with the given @var{x} first, so for example to find the first
element greater than 5,

@example
(member 5 '(3 5 1 7 2 9) <) @result{} (7 2 9)
@end example

This version of @code{member} extends the core @code{member}
(@pxref{List Searching}) by accepting an equality predicate.
@end deffn


@node SRFI-1 Deleting
@subsubsection Deleting
@cindex list delete

@deffn {Scheme Procedure} delete x lst [=]
@deffnx {Scheme Procedure} delete! x lst [=]
Return a list containing the elements of @var{lst} but with those
equal to @var{x} deleted.  The returned elements will be in the same
order as they were in @var{lst}.

Equality is determined by the @var{=} predicate, or @code{equal?} if
not given.  An equality call is made just once for each element, but
the order in which the calls are made on the elements is unspecified.

The equality calls are always @code{(= x elem)}, ie.@: the given @var{x}
is first.  This means for instance elements greater than 5 can be
deleted with @code{(delete 5 lst <)}.

@code{delete} does not modify @var{lst}, but the return might share a
common tail with @var{lst}.  @code{delete!} may modify the structure
of @var{lst} to construct its return.

These functions extend the core @code{delete} and @code{delete!}
(@pxref{List Modification}) in accepting an equality predicate.  See
also @code{lset-difference} (@pxref{SRFI-1 Set Operations}) for
deleting multiple elements from a list.
@end deffn

@deffn {Scheme Procedure} delete-duplicates lst [=]
@deffnx {Scheme Procedure} delete-duplicates! lst [=]
Return a list containing the elements of @var{lst} but without
duplicates.

When elements are equal, only the first in @var{lst} is retained.
Equal elements can be anywhere in @var{lst}, they don't have to be
adjacent.  The returned list will have the retained elements in the
same order as they were in @var{lst}.

Equality is determined by the @var{=} predicate, or @code{equal?} if
not given.  Calls @code{(= x y)} are made with element @var{x} being
before @var{y} in @var{lst}.  A call is made at most once for each
combination, but the sequence of the calls across the elements is
unspecified.

@code{delete-duplicates} does not modify @var{lst}, but the return
might share a common tail with @var{lst}.  @code{delete-duplicates!}
may modify the structure of @var{lst} to construct its return.

In the worst case, this is an @math{O(N^2)} algorithm because it must
check each element against all those preceding it.  For long lists it
is more efficient to sort and then compare only adjacent elements.
@end deffn


@node SRFI-1 Association Lists
@subsubsection Association Lists
@cindex association list
@cindex alist

@c FIXME::martin: Review me!

Association lists are described in detail in section @ref{Association
Lists}.  The present section only documents the additional procedures
for dealing with association lists defined by SRFI-1.

@deffn {Scheme Procedure} assoc key alist [=]
Return the pair from @var{alist} which matches @var{key}.  This
extends the core @code{assoc} (@pxref{Retrieving Alist Entries}) by
taking an optional @var{=} comparison procedure.

The default comparison is @code{equal?}.  If an @var{=} parameter is
given it's called @code{(@var{=} @var{key} @var{alistcar})}, i.e.@: the
given target @var{key} is the first argument, and a @code{car} from
@var{alist} is second.

For example a case-insensitive string lookup,

@example
(assoc "yy" '(("XX" . 1) ("YY" . 2)) string-ci=?)
@result{} ("YY" . 2)
@end example
@end deffn

@deffn {Scheme Procedure} alist-cons key datum alist
Cons a new association @var{key} and @var{datum} onto @var{alist} and
return the result.  This is equivalent to

@lisp
(cons (cons @var{key} @var{datum}) @var{alist})
@end lisp

@code{acons} (@pxref{Adding or Setting Alist Entries}) in the Guile
core does the same thing.
@end deffn

@deffn {Scheme Procedure} alist-copy alist
Return a newly allocated copy of @var{alist}, that means that the
spine of the list as well as the pairs are copied.
@end deffn

@deffn {Scheme Procedure} alist-delete key alist [=]
@deffnx {Scheme Procedure} alist-delete! key alist [=]
Return a list containing the elements of @var{alist} but with those
elements whose keys are equal to @var{key} deleted.  The returned
elements will be in the same order as they were in @var{alist}.

Equality is determined by the @var{=} predicate, or @code{equal?} if
not given.  The order in which elements are tested is unspecified, but
each equality call is made @code{(= key alistkey)}, i.e.@: the given
@var{key} parameter is first and the key from @var{alist} second.
This means for instance all associations with a key greater than 5 can
be removed with @code{(alist-delete 5 alist <)}.

@code{alist-delete} does not modify @var{alist}, but the return might
share a common tail with @var{alist}.  @code{alist-delete!} may modify
the list structure of @var{alist} to construct its return.
@end deffn


@node SRFI-1 Set Operations
@subsubsection Set Operations on Lists
@cindex list set operation

Lists can be used to represent sets of objects.  The procedures in
this section operate on such lists as sets.

Note that lists are not an efficient way to implement large sets.  The
procedures here typically take time @math{@var{m}@cross{}@var{n}} when
operating on @var{m} and @var{n} element lists.  Other data structures
like trees, bitsets (@pxref{Bit Vectors}) or hash tables (@pxref{Hash
Tables}) are faster.

All these procedures take an equality predicate as the first argument.
This predicate is used for testing the objects in the list sets for
sameness.  This predicate must be consistent with @code{eq?}
(@pxref{Equality}) in the sense that if two list elements are
@code{eq?} then they must also be equal under the predicate.  This
simply means a given object must be equal to itself.

@deffn {Scheme Procedure} lset<= = list @dots{}
Return @code{#t} if each list is a subset of the one following it.
I.e., @var{list1} is a subset of @var{list2}, @var{list2} is a subset of
@var{list3}, etc., for as many lists as given.  If only one list or no
lists are given, the return value is @code{#t}.

A list @var{x} is a subset of @var{y} if each element of @var{x} is
equal to some element in @var{y}.  Elements are compared using the
given @var{=} procedure, called as @code{(@var{=} xelem yelem)}.

@example
(lset<= eq?)                      @result{} #t
(lset<= eqv? '(1 2 3) '(1))       @result{} #f
(lset<= eqv? '(1 3 2) '(4 3 1 2)) @result{} #t
@end example
@end deffn

@deffn {Scheme Procedure} lset= = list @dots{}
Return @code{#t} if all argument lists are set-equal.  @var{list1} is
compared to @var{list2}, @var{list2} to @var{list3}, etc., for as many
lists as given.  If only one list or no lists are given, the return
value is @code{#t}.

Two lists @var{x} and @var{y} are set-equal if each element of @var{x}
is equal to some element of @var{y} and conversely each element of
@var{y} is equal to some element of @var{x}.  The order of the
elements in the lists doesn't matter.  Element equality is determined
with the given @var{=} procedure, called as @code{(@var{=} xelem
yelem)}, but exactly which calls are made is unspecified.

@example
(lset= eq?)                      @result{} #t
(lset= eqv? '(1 2 3) '(3 2 1))   @result{} #t
(lset= string-ci=? '("a" "A" "b") '("B" "b" "a")) @result{} #t
@end example
@end deffn

@deffn {Scheme Procedure} lset-adjoin = list elem @dots{}
Add to @var{list} any of the given @var{elem}s not already in the list.
@var{elem}s are @code{cons}ed onto the start of @var{list} (so the
return value shares a common tail with @var{list}), but the order that
the @var{elem}s are added is unspecified.

The given @var{=} procedure is used for comparing elements, called as
@code{(@var{=} listelem elem)}, i.e., the second argument is one of
the given @var{elem} parameters.

@example
(lset-adjoin eqv? '(1 2 3) 4 1 5) @result{} (5 4 1 2 3)
@end example
@end deffn

@deffn {Scheme Procedure} lset-union = list @dots{}
@deffnx {Scheme Procedure} lset-union! = list @dots{}
Return the union of the argument list sets.  The result is built by
taking the union of @var{list1} and @var{list2}, then the union of
that with @var{list3}, etc., for as many lists as given.  For one list
argument that list itself is the result, for no list arguments the
result is the empty list.

The union of two lists @var{x} and @var{y} is formed as follows.  If
@var{x} is empty then the result is @var{y}.  Otherwise start with
@var{x} as the result and consider each @var{y} element (from first to
last).  A @var{y} element not equal to something already in the result
is @code{cons}ed onto the result.

The given @var{=} procedure is used for comparing elements, called as
@code{(@var{=} relem yelem)}.  The first argument is from the result
accumulated so far, and the second is from the list being union-ed in.
But exactly which calls are made is otherwise unspecified.

Notice that duplicate elements in @var{list1} (or the first non-empty
list) are preserved, but that repeated elements in subsequent lists
are only added once.

@example
(lset-union eqv?)                          @result{} ()
(lset-union eqv? '(1 2 3))                 @result{} (1 2 3)
(lset-union eqv? '(1 2 1 3) '(2 4 5) '(5)) @result{} (5 4 1 2 1 3)
@end example

@code{lset-union} doesn't change the given lists but the result may
share a tail with the first non-empty list.  @code{lset-union!} can
modify all of the given lists to form the result.
@end deffn

@deffn {Scheme Procedure} lset-intersection = list1 list2 @dots{}
@deffnx {Scheme Procedure} lset-intersection! = list1 list2 @dots{}
Return the intersection of @var{list1} with the other argument lists,
meaning those elements of @var{list1} which are also in all of
@var{list2} etc.  For one list argument, just that list is returned.

The test for an element of @var{list1} to be in the return is simply
that it's equal to some element in each of @var{list2} etc.  Notice
this means an element appearing twice in @var{list1} but only once in
each of @var{list2} etc will go into the return twice.  The return has
its elements in the same order as they were in @var{list1}.

The given @var{=} procedure is used for comparing elements, called as
@code{(@var{=} elem1 elemN)}.  The first argument is from @var{list1}
and the second is from one of the subsequent lists.  But exactly which
calls are made and in what order is unspecified.

@example
(lset-intersection eqv? '(x y))                        @result{} (x y)
(lset-intersection eqv? '(1 2 3) '(4 3 2))             @result{} (2 3)
(lset-intersection eqv? '(1 1 2 2) '(1 2) '(2 1) '(2)) @result{} (2 2)
@end example

The return from @code{lset-intersection} may share a tail with
@var{list1}.  @code{lset-intersection!} may modify @var{list1} to form
its result.
@end deffn

@deffn {Scheme Procedure} lset-difference = list1 list2 @dots{}
@deffnx {Scheme Procedure} lset-difference! = list1 list2 @dots{}
Return @var{list1} with any elements in @var{list2}, @var{list3} etc
removed (ie.@: subtracted).  For one list argument, just that list is
returned.

The given @var{=} procedure is used for comparing elements, called as
@code{(@var{=} elem1 elemN)}.  The first argument is from @var{list1}
and the second from one of the subsequent lists.  But exactly which
calls are made and in what order is unspecified.

@example
(lset-difference eqv? '(x y))             @result{} (x y)
(lset-difference eqv? '(1 2 3) '(3 1))    @result{} (2)
(lset-difference eqv? '(1 2 3) '(3) '(2)) @result{} (1)
@end example

The return from @code{lset-difference} may share a tail with
@var{list1}.  @code{lset-difference!} may modify @var{list1} to form
its result.
@end deffn

@deffn {Scheme Procedure} lset-diff+intersection = list1 list2 @dots{}
@deffnx {Scheme Procedure} lset-diff+intersection! = list1 list2 @dots{}
Return two values (@pxref{Multiple Values}), the difference and
intersection of the argument lists as per @code{lset-difference} and
@code{lset-intersection} above.

For two list arguments this partitions @var{list1} into those elements
of @var{list1} which are in @var{list2} and not in @var{list2}.  (But
for more than two arguments there can be elements of @var{list1} which
are neither part of the difference nor the intersection.)

One of the return values from @code{lset-diff+intersection} may share
a tail with @var{list1}.  @code{lset-diff+intersection!} may modify
@var{list1} to form its results.
@end deffn

@deffn {Scheme Procedure} lset-xor = list @dots{}
@deffnx {Scheme Procedure} lset-xor! = list @dots{}
Return an XOR of the argument lists.  For two lists this means those
elements which are in exactly one of the lists.  For more than two
lists it means those elements which appear in an odd number of the
lists.

To be precise, the XOR of two lists @var{x} and @var{y} is formed by
taking those elements of @var{x} not equal to any element of @var{y},
plus those elements of @var{y} not equal to any element of @var{x}.
Equality is determined with the given @var{=} procedure, called as
@code{(@var{=} e1 e2)}.  One argument is from @var{x} and the other
from @var{y}, but which way around is unspecified.  Exactly which
calls are made is also unspecified, as is the order of the elements in
the result.

@example
(lset-xor eqv? '(x y))             @result{} (x y)
(lset-xor eqv? '(1 2 3) '(4 3 2))  @result{} (4 1)
@end example

The return from @code{lset-xor} may share a tail with one of the list
arguments.  @code{lset-xor!} may modify @var{list1} to form its
result.
@end deffn


@node SRFI-2
@subsection SRFI-2 - and-let*
@cindex SRFI-2

@noindent
The following syntax can be obtained with

@lisp
(use-modules (srfi srfi-2))
@end lisp

or alternatively

@lisp
(use-modules (ice-9 and-let-star))
@end lisp

@deffn {library syntax} and-let* (clause @dots{}) body @dots{}
A combination of @code{and} and @code{let*}.

Each @var{clause} is evaluated in turn, and if @code{#f} is obtained
then evaluation stops and @code{#f} is returned.  If all are
non-@code{#f} then @var{body} is evaluated and the last form gives the
return value, or if @var{body} is empty then the result is @code{#t}.
Each @var{clause} should be one of the following,

@table @code
@item (symbol expr)
Evaluate @var{expr}, check for @code{#f}, and bind it to @var{symbol}.
Like @code{let*}, that binding is available to subsequent clauses.
@item (expr)
Evaluate @var{expr} and check for @code{#f}.
@item symbol
Get the value bound to @var{symbol} and check for @code{#f}.
@end table

Notice that @code{(expr)} has an ``extra'' pair of parentheses, for
instance @code{((eq? x y))}.  One way to remember this is to imagine
the @code{symbol} in @code{(symbol expr)} is omitted.

@code{and-let*} is good for calculations where a @code{#f} value means
termination, but where a non-@code{#f} value is going to be needed in
subsequent expressions.

The following illustrates this, it returns text between brackets
@samp{[...]} in a string, or @code{#f} if there are no such brackets
(ie.@: either @code{string-index} gives @code{#f}).

@example
(define (extract-brackets str)
  (and-let* ((start (string-index str #\[))
             (end   (string-index str #\] start)))
    (substring str (1+ start) end)))
@end example

The following shows plain variables and expressions tested too.
@code{diagnostic-levels} is taken to be an alist associating a
diagnostic type with a level.  @code{str} is printed only if the type
is known and its level is high enough.

@example
(define (show-diagnostic type str)
  (and-let* (want-diagnostics
             (level (assq-ref diagnostic-levels type))
             ((>= level current-diagnostic-level)))
    (display str)))
@end example

The advantage of @code{and-let*} is that an extended sequence of
expressions and tests doesn't require lots of nesting as would arise
from separate @code{and} and @code{let*}, or from @code{cond} with
@code{=>}.

@end deffn


@node SRFI-4
@subsection SRFI-4 - Homogeneous numeric vector datatypes
@cindex SRFI-4

SRFI-4 provides an interface to uniform numeric vectors: vectors whose elements
are all of a single numeric type. Guile offers uniform numeric vectors for
signed and unsigned 8-bit, 16-bit, 32-bit, and 64-bit integers, two sizes of
floating point values, and, as an extension to SRFI-4, complex floating-point
numbers of these two sizes.

The standard SRFI-4 procedures and data types may be included via loading the
appropriate module:

@example
(use-modules (srfi srfi-4))
@end example

This module is currently a part of the default Guile environment, but it is a
good practice to explicitly import the module. In the future, using SRFI-4
procedures without importing the SRFI-4 module will cause a deprecation message
to be printed. (Of course, one may call the C functions at any time. Would that
C had modules!)

@menu
* SRFI-4 Overview::             The warp and weft of uniform numeric vectors.
* SRFI-4 API::                  Uniform vectors, from Scheme and from C.
* SRFI-4 Generic Operations::   The general, operating on the specific.
* SRFI-4 and Bytevectors::      SRFI-4 vectors are backed by bytevectors.
* SRFI-4 Extensions::           Guile-specific extensions to the standard.
@end menu

@node SRFI-4 Overview
@subsubsection SRFI-4 - Overview

Uniform numeric vectors can be useful since they consume less memory
than the non-uniform, general vectors.  Also, since the types they can
store correspond directly to C types, it is easier to work with them
efficiently on a low level.  Consider image processing as an example,
where you want to apply a filter to some image.  While you could store
the pixels of an image in a general vector and write a general
convolution function, things are much more efficient with uniform
vectors: the convolution function knows that all pixels are unsigned
8-bit values (say), and can use a very tight inner loop.

This is implemented in Scheme by having the compiler notice calls to the SRFI-4
accessors, and inline them to appropriate compiled code. From C you have access
to the raw array; functions for efficiently working with uniform numeric vectors
from C are listed at the end of this section.

Uniform numeric vectors are the special case of one dimensional uniform
numeric arrays.

There are 12 standard kinds of uniform numeric vectors, and they all have their
own complement of constructors, accessors, and so on. Procedures that operate on
a specific kind of uniform numeric vector have a ``tag'' in their name,
indicating the element type.

@table @nicode
@item u8
unsigned 8-bit integers

@item s8
signed 8-bit integers

@item u16
unsigned 16-bit integers

@item s16
signed 16-bit integers

@item u32
unsigned 32-bit integers

@item s32
signed 32-bit integers

@item u64
unsigned 64-bit integers

@item s64
signed 64-bit integers

@item f32
the C type @code{float}

@item f64
the C type @code{double}

@end table

In addition, Guile supports uniform arrays of complex numbers, with the
nonstandard tags:

@table @nicode

@item c32
complex numbers in rectangular form with the real and imaginary part
being a @code{float}

@item c64
complex numbers in rectangular form with the real and imaginary part
being a @code{double}

@end table

The external representation (ie.@: read syntax) for these vectors is
similar to normal Scheme vectors, but with an additional tag from the
tables above indicating the vector's type.  For example,

@lisp
#u16(1 2 3)
#f64(3.1415 2.71)
@end lisp

Note that the read syntax for floating-point here conflicts with
@code{#f} for false.  In Standard Scheme one can write @code{(1 #f3)}
for a three element list @code{(1 #f 3)}, but for Guile @code{(1 #f3)}
is invalid.  @code{(1 #f 3)} is almost certainly what one should write
anyway to make the intention clear, so this is rarely a problem.


@node SRFI-4 API
@subsubsection SRFI-4 - API

Note that the @nicode{c32} and @nicode{c64} functions are only available from
@nicode{(srfi srfi-4 gnu)}.

@deffn {Scheme Procedure} u8vector? obj
@deffnx {Scheme Procedure} s8vector? obj
@deffnx {Scheme Procedure} u16vector? obj
@deffnx {Scheme Procedure} s16vector? obj
@deffnx {Scheme Procedure} u32vector? obj
@deffnx {Scheme Procedure} s32vector? obj
@deffnx {Scheme Procedure} u64vector? obj
@deffnx {Scheme Procedure} s64vector? obj
@deffnx {Scheme Procedure} f32vector? obj
@deffnx {Scheme Procedure} f64vector? obj
@deffnx {Scheme Procedure} c32vector? obj
@deffnx {Scheme Procedure} c64vector? obj
@deffnx {C Function} scm_u8vector_p (obj)
@deffnx {C Function} scm_s8vector_p (obj)
@deffnx {C Function} scm_u16vector_p (obj)
@deffnx {C Function} scm_s16vector_p (obj)
@deffnx {C Function} scm_u32vector_p (obj)
@deffnx {C Function} scm_s32vector_p (obj)
@deffnx {C Function} scm_u64vector_p (obj)
@deffnx {C Function} scm_s64vector_p (obj)
@deffnx {C Function} scm_f32vector_p (obj)
@deffnx {C Function} scm_f64vector_p (obj)
@deffnx {C Function} scm_c32vector_p (obj)
@deffnx {C Function} scm_c64vector_p (obj)
Return @code{#t} if @var{obj} is a homogeneous numeric vector of the
indicated type.
@end deffn

@deffn  {Scheme Procedure} make-u8vector n [value]
@deffnx {Scheme Procedure} make-s8vector n [value]
@deffnx {Scheme Procedure} make-u16vector n [value]
@deffnx {Scheme Procedure} make-s16vector n [value]
@deffnx {Scheme Procedure} make-u32vector n [value]
@deffnx {Scheme Procedure} make-s32vector n [value]
@deffnx {Scheme Procedure} make-u64vector n [value]
@deffnx {Scheme Procedure} make-s64vector n [value]
@deffnx {Scheme Procedure} make-f32vector n [value]
@deffnx {Scheme Procedure} make-f64vector n [value]
@deffnx {Scheme Procedure} make-c32vector n [value]
@deffnx {Scheme Procedure} make-c64vector n [value]
@deffnx {C Function} scm_make_u8vector (n, value)
@deffnx {C Function} scm_make_s8vector (n, value)
@deffnx {C Function} scm_make_u16vector (n, value)
@deffnx {C Function} scm_make_s16vector (n, value)
@deffnx {C Function} scm_make_u32vector (n, value)
@deffnx {C Function} scm_make_s32vector (n, value)
@deffnx {C Function} scm_make_u64vector (n, value)
@deffnx {C Function} scm_make_s64vector (n, value)
@deffnx {C Function} scm_make_f32vector (n, value)
@deffnx {C Function} scm_make_f64vector (n, value)
@deffnx {C Function} scm_make_c32vector (n, value)
@deffnx {C Function} scm_make_c64vector (n, value)
Return a newly allocated homogeneous numeric vector holding @var{n}
elements of the indicated type.  If @var{value} is given, the vector
is initialized with that value, otherwise the contents are
unspecified.
@end deffn

@deffn  {Scheme Procedure} u8vector value @dots{}
@deffnx {Scheme Procedure} s8vector value @dots{}
@deffnx {Scheme Procedure} u16vector value @dots{}
@deffnx {Scheme Procedure} s16vector value @dots{}
@deffnx {Scheme Procedure} u32vector value @dots{}
@deffnx {Scheme Procedure} s32vector value @dots{}
@deffnx {Scheme Procedure} u64vector value @dots{}
@deffnx {Scheme Procedure} s64vector value @dots{}
@deffnx {Scheme Procedure} f32vector value @dots{}
@deffnx {Scheme Procedure} f64vector value @dots{}
@deffnx {Scheme Procedure} c32vector value @dots{}
@deffnx {Scheme Procedure} c64vector value @dots{}
@deffnx {C Function} scm_u8vector (values)
@deffnx {C Function} scm_s8vector (values)
@deffnx {C Function} scm_u16vector (values)
@deffnx {C Function} scm_s16vector (values)
@deffnx {C Function} scm_u32vector (values)
@deffnx {C Function} scm_s32vector (values)
@deffnx {C Function} scm_u64vector (values)
@deffnx {C Function} scm_s64vector (values)
@deffnx {C Function} scm_f32vector (values)
@deffnx {C Function} scm_f64vector (values)
@deffnx {C Function} scm_c32vector (values)
@deffnx {C Function} scm_c64vector (values)
Return a newly allocated homogeneous numeric vector of the indicated
type, holding the given parameter @var{value}s.  The vector length is
the number of parameters given.
@end deffn

@deffn {Scheme Procedure} u8vector-length vec
@deffnx {Scheme Procedure} s8vector-length vec
@deffnx {Scheme Procedure} u16vector-length vec
@deffnx {Scheme Procedure} s16vector-length vec
@deffnx {Scheme Procedure} u32vector-length vec
@deffnx {Scheme Procedure} s32vector-length vec
@deffnx {Scheme Procedure} u64vector-length vec
@deffnx {Scheme Procedure} s64vector-length vec
@deffnx {Scheme Procedure} f32vector-length vec
@deffnx {Scheme Procedure} f64vector-length vec
@deffnx {Scheme Procedure} c32vector-length vec
@deffnx {Scheme Procedure} c64vector-length vec
@deffnx {C Function} scm_u8vector_length (vec)
@deffnx {C Function} scm_s8vector_length (vec)
@deffnx {C Function} scm_u16vector_length (vec)
@deffnx {C Function} scm_s16vector_length (vec)
@deffnx {C Function} scm_u32vector_length (vec)
@deffnx {C Function} scm_s32vector_length (vec)
@deffnx {C Function} scm_u64vector_length (vec)
@deffnx {C Function} scm_s64vector_length (vec)
@deffnx {C Function} scm_f32vector_length (vec)
@deffnx {C Function} scm_f64vector_length (vec)
@deffnx {C Function} scm_c32vector_length (vec)
@deffnx {C Function} scm_c64vector_length (vec)
Return the number of elements in @var{vec}.
@end deffn

@deffn {Scheme Procedure} u8vector-ref vec i
@deffnx {Scheme Procedure} s8vector-ref vec i
@deffnx {Scheme Procedure} u16vector-ref vec i
@deffnx {Scheme Procedure} s16vector-ref vec i
@deffnx {Scheme Procedure} u32vector-ref vec i
@deffnx {Scheme Procedure} s32vector-ref vec i
@deffnx {Scheme Procedure} u64vector-ref vec i
@deffnx {Scheme Procedure} s64vector-ref vec i
@deffnx {Scheme Procedure} f32vector-ref vec i
@deffnx {Scheme Procedure} f64vector-ref vec i
@deffnx {Scheme Procedure} c32vector-ref vec i
@deffnx {Scheme Procedure} c64vector-ref vec i
@deffnx {C Function} scm_u8vector_ref (vec, i)
@deffnx {C Function} scm_s8vector_ref (vec, i)
@deffnx {C Function} scm_u16vector_ref (vec, i)
@deffnx {C Function} scm_s16vector_ref (vec, i)
@deffnx {C Function} scm_u32vector_ref (vec, i)
@deffnx {C Function} scm_s32vector_ref (vec, i)
@deffnx {C Function} scm_u64vector_ref (vec, i)
@deffnx {C Function} scm_s64vector_ref (vec, i)
@deffnx {C Function} scm_f32vector_ref (vec, i)
@deffnx {C Function} scm_f64vector_ref (vec, i)
@deffnx {C Function} scm_c32vector_ref (vec, i)
@deffnx {C Function} scm_c64vector_ref (vec, i)
Return the element at index @var{i} in @var{vec}.  The first element
in @var{vec} is index 0.
@end deffn

@deffn {Scheme Procedure} u8vector-set! vec i value
@deffnx {Scheme Procedure} s8vector-set! vec i value
@deffnx {Scheme Procedure} u16vector-set! vec i value
@deffnx {Scheme Procedure} s16vector-set! vec i value
@deffnx {Scheme Procedure} u32vector-set! vec i value
@deffnx {Scheme Procedure} s32vector-set! vec i value
@deffnx {Scheme Procedure} u64vector-set! vec i value
@deffnx {Scheme Procedure} s64vector-set! vec i value
@deffnx {Scheme Procedure} f32vector-set! vec i value
@deffnx {Scheme Procedure} f64vector-set! vec i value
@deffnx {Scheme Procedure} c32vector-set! vec i value
@deffnx {Scheme Procedure} c64vector-set! vec i value
@deffnx {C Function} scm_u8vector_set_x (vec, i, value)
@deffnx {C Function} scm_s8vector_set_x (vec, i, value)
@deffnx {C Function} scm_u16vector_set_x (vec, i, value)
@deffnx {C Function} scm_s16vector_set_x (vec, i, value)
@deffnx {C Function} scm_u32vector_set_x (vec, i, value)
@deffnx {C Function} scm_s32vector_set_x (vec, i, value)
@deffnx {C Function} scm_u64vector_set_x (vec, i, value)
@deffnx {C Function} scm_s64vector_set_x (vec, i, value)
@deffnx {C Function} scm_f32vector_set_x (vec, i, value)
@deffnx {C Function} scm_f64vector_set_x (vec, i, value)
@deffnx {C Function} scm_c32vector_set_x (vec, i, value)
@deffnx {C Function} scm_c64vector_set_x (vec, i, value)
Set the element at index @var{i} in @var{vec} to @var{value}.  The
first element in @var{vec} is index 0.  The return value is
unspecified.
@end deffn

@deffn {Scheme Procedure} u8vector->list vec
@deffnx {Scheme Procedure} s8vector->list vec
@deffnx {Scheme Procedure} u16vector->list vec
@deffnx {Scheme Procedure} s16vector->list vec
@deffnx {Scheme Procedure} u32vector->list vec
@deffnx {Scheme Procedure} s32vector->list vec
@deffnx {Scheme Procedure} u64vector->list vec
@deffnx {Scheme Procedure} s64vector->list vec
@deffnx {Scheme Procedure} f32vector->list vec
@deffnx {Scheme Procedure} f64vector->list vec
@deffnx {Scheme Procedure} c32vector->list vec
@deffnx {Scheme Procedure} c64vector->list vec
@deffnx {C Function} scm_u8vector_to_list (vec)
@deffnx {C Function} scm_s8vector_to_list (vec)
@deffnx {C Function} scm_u16vector_to_list (vec)
@deffnx {C Function} scm_s16vector_to_list (vec)
@deffnx {C Function} scm_u32vector_to_list (vec)
@deffnx {C Function} scm_s32vector_to_list (vec)
@deffnx {C Function} scm_u64vector_to_list (vec)
@deffnx {C Function} scm_s64vector_to_list (vec)
@deffnx {C Function} scm_f32vector_to_list (vec)
@deffnx {C Function} scm_f64vector_to_list (vec)
@deffnx {C Function} scm_c32vector_to_list (vec)
@deffnx {C Function} scm_c64vector_to_list (vec)
Return a newly allocated list holding all elements of @var{vec}.
@end deffn

@deffn  {Scheme Procedure} list->u8vector lst
@deffnx {Scheme Procedure} list->s8vector lst
@deffnx {Scheme Procedure} list->u16vector lst
@deffnx {Scheme Procedure} list->s16vector lst
@deffnx {Scheme Procedure} list->u32vector lst
@deffnx {Scheme Procedure} list->s32vector lst
@deffnx {Scheme Procedure} list->u64vector lst
@deffnx {Scheme Procedure} list->s64vector lst
@deffnx {Scheme Procedure} list->f32vector lst
@deffnx {Scheme Procedure} list->f64vector lst
@deffnx {Scheme Procedure} list->c32vector lst
@deffnx {Scheme Procedure} list->c64vector lst
@deffnx {C Function} scm_list_to_u8vector (lst)
@deffnx {C Function} scm_list_to_s8vector (lst)
@deffnx {C Function} scm_list_to_u16vector (lst)
@deffnx {C Function} scm_list_to_s16vector (lst)
@deffnx {C Function} scm_list_to_u32vector (lst)
@deffnx {C Function} scm_list_to_s32vector (lst)
@deffnx {C Function} scm_list_to_u64vector (lst)
@deffnx {C Function} scm_list_to_s64vector (lst)
@deffnx {C Function} scm_list_to_f32vector (lst)
@deffnx {C Function} scm_list_to_f64vector (lst)
@deffnx {C Function} scm_list_to_c32vector (lst)
@deffnx {C Function} scm_list_to_c64vector (lst)
Return a newly allocated homogeneous numeric vector of the indicated type,
initialized with the elements of the list @var{lst}.
@end deffn

@deftypefn  {C Function} SCM scm_take_u8vector (const scm_t_uint8 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_s8vector (const scm_t_int8 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_u16vector (const scm_t_uint16 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_s16vector (const scm_t_int16 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_u32vector (const scm_t_uint32 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_s32vector (const scm_t_int32 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_u64vector (const scm_t_uint64 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_s64vector (const scm_t_int64 *data, size_t len)
@deftypefnx {C Function} SCM scm_take_f32vector (const float *data, size_t len)
@deftypefnx {C Function} SCM scm_take_f64vector (const double *data, size_t len)
@deftypefnx {C Function} SCM scm_take_c32vector (const float *data, size_t len)
@deftypefnx {C Function} SCM scm_take_c64vector (const double *data, size_t len)
Return a new uniform numeric vector of the indicated type and length
that uses the memory pointed to by @var{data} to store its elements.
This memory will eventually be freed with @code{free}.  The argument
@var{len} specifies the number of elements in @var{data}, not its size
in bytes.

The @code{c32} and @code{c64} variants take a pointer to a C array of
@code{float}s or @code{double}s.  The real parts of the complex numbers
are at even indices in that array, the corresponding imaginary parts are
at the following odd index.
@end deftypefn

@deftypefn {C Function} {const scm_t_uint8 *} scm_u8vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const scm_t_int8 *} scm_s8vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const scm_t_uint16 *} scm_u16vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const scm_t_int16 *} scm_s16vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const scm_t_uint32 *} scm_u32vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const scm_t_int32 *} scm_s32vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const scm_t_uint64 *} scm_u64vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const scm_t_int64 *} scm_s64vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const float *} scm_f32vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const double *} scm_f64vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const float *} scm_c32vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {const double *} scm_c64vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
Like @code{scm_vector_elements} (@pxref{Vector Accessing from C}), but
returns a pointer to the elements of a uniform numeric vector of the
indicated kind.
@end deftypefn

@deftypefn {C Function} {scm_t_uint8 *} scm_u8vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {scm_t_int8 *} scm_s8vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {scm_t_uint16 *} scm_u16vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {scm_t_int16 *} scm_s16vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {scm_t_uint32 *} scm_u32vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {scm_t_int32 *} scm_s32vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {scm_t_uint64 *} scm_u64vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {scm_t_int64 *} scm_s64vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {float *} scm_f32vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {double *} scm_f64vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {float *} scm_c32vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
@deftypefnx {C Function} {double *} scm_c64vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
Like @code{scm_vector_writable_elements} (@pxref{Vector Accessing from
C}), but returns a pointer to the elements of a uniform numeric vector
of the indicated kind.
@end deftypefn

@node SRFI-4 Generic Operations
@subsubsection SRFI-4 - Generic operations

Guile also provides procedures that operate on all types of uniform numeric
vectors.  In what is probably a bug, these procedures are currently available in
the default environment as well; however prudent hackers will make sure to
import @code{(srfi srfi-4 gnu)} before using these.

@deftypefn {C Function} int scm_is_uniform_vector (SCM uvec)
Return non-zero when @var{uvec} is a uniform numeric vector, zero
otherwise.
@end deftypefn

@deftypefn {C Function} size_t scm_c_uniform_vector_length (SCM uvec)
Return the number of elements of @var{uvec} as a @code{size_t}.
@end deftypefn

@deffn  {Scheme Procedure} uniform-vector? obj
@deffnx {C Function} scm_uniform_vector_p (obj)
Return @code{#t} if @var{obj} is a homogeneous numeric vector of the
indicated type.
@end deffn

@deffn  {Scheme Procedure} uniform-vector-length vec
@deffnx {C Function} scm_uniform_vector_length (vec)
Return the number of elements in @var{vec}.
@end deffn

@deffn  {Scheme Procedure} uniform-vector-ref vec i
@deffnx {C Function} scm_uniform_vector_ref (vec, i)
Return the element at index @var{i} in @var{vec}.  The first element
in @var{vec} is index 0.
@end deffn

@deffn  {Scheme Procedure} uniform-vector-set! vec i value
@deffnx {C Function} scm_uniform_vector_set_x (vec, i, value)
Set the element at index @var{i} in @var{vec} to @var{value}.  The
first element in @var{vec} is index 0.  The return value is
unspecified.
@end deffn

@deffn  {Scheme Procedure} uniform-vector->list vec
@deffnx {C Function} scm_uniform_vector_to_list (vec)
Return a newly allocated list holding all elements of @var{vec}.
@end deffn

@deftypefn  {C Function} {const void *} scm_uniform_vector_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
Like @code{scm_vector_elements} (@pxref{Vector Accessing from C}), but
returns a pointer to the elements of a uniform numeric vector.
@end deftypefn

@deftypefn  {C Function} {void *} scm_uniform_vector_writable_elements (SCM vec, scm_t_array_handle *handle, size_t *lenp, ssize_t *incp)
Like @code{scm_vector_writable_elements} (@pxref{Vector Accessing from
C}), but returns a pointer to the elements of a uniform numeric vector.
@end deftypefn

Unless you really need to the limited generality of these functions, it is best
to use the type-specific functions, or the generalized vector accessors.

@node SRFI-4 and Bytevectors
@subsubsection SRFI-4 - Relation to bytevectors

Guile implements SRFI-4 vectors using bytevectors (@pxref{Bytevectors}). Often
when you have a numeric vector, you end up wanting to write its bytes somewhere,
or have access to the underlying bytes, or read in bytes from somewhere else.
Bytevectors are very good at this sort of thing. But the SRFI-4 APIs are nicer
to use when doing number-crunching, because they are addressed by element and
not by byte.

So as a compromise, Guile allows all bytevector functions to operate on numeric
vectors. They address the underlying bytes in the native endianness, as one
would expect.

Following the same reasoning, that it's just bytes underneath, Guile also allows
uniform vectors of a given type to be accessed as if they were of any type. One
can fill a @nicode{u32vector}, and access its elements with
@nicode{u8vector-ref}. One can use @nicode{f64vector-ref} on bytevectors. It's
all the same to Guile.

In this way, uniform numeric vectors may be written to and read from
input/output ports using the procedures that operate on bytevectors.

@xref{Bytevectors}, for more information.


@node SRFI-4 Extensions
@subsubsection SRFI-4 - Guile extensions

Guile defines some useful extensions to SRFI-4, which are not available in the
default Guile environment. They may be imported by loading the extensions
module:

@example
(use-modules (srfi srfi-4 gnu))
@end example

@deffn  {Scheme Procedure} any->u8vector obj
@deffnx {Scheme Procedure} any->s8vector obj
@deffnx {Scheme Procedure} any->u16vector obj
@deffnx {Scheme Procedure} any->s16vector obj
@deffnx {Scheme Procedure} any->u32vector obj
@deffnx {Scheme Procedure} any->s32vector obj
@deffnx {Scheme Procedure} any->u64vector obj
@deffnx {Scheme Procedure} any->s64vector obj
@deffnx {Scheme Procedure} any->f32vector obj
@deffnx {Scheme Procedure} any->f64vector obj
@deffnx {Scheme Procedure} any->c32vector obj
@deffnx {Scheme Procedure} any->c64vector obj
@deffnx {C Function} scm_any_to_u8vector (obj)
@deffnx {C Function} scm_any_to_s8vector (obj)
@deffnx {C Function} scm_any_to_u16vector (obj)
@deffnx {C Function} scm_any_to_s16vector (obj)
@deffnx {C Function} scm_any_to_u32vector (obj)
@deffnx {C Function} scm_any_to_s32vector (obj)
@deffnx {C Function} scm_any_to_u64vector (obj)
@deffnx {C Function} scm_any_to_s64vector (obj)
@deffnx {C Function} scm_any_to_f32vector (obj)
@deffnx {C Function} scm_any_to_f64vector (obj)
@deffnx {C Function} scm_any_to_c32vector (obj)
@deffnx {C Function} scm_any_to_c64vector (obj)
Return a (maybe newly allocated) uniform numeric vector of the indicated
type, initialized with the elements of @var{obj}, which must be a list,
a vector, or a uniform vector.  When @var{obj} is already a suitable
uniform numeric vector, it is returned unchanged.
@end deffn


@node SRFI-6
@subsection SRFI-6 - Basic String Ports
@cindex SRFI-6

SRFI-6 defines the procedures @code{open-input-string},
@code{open-output-string} and @code{get-output-string}.  These
procedures are included in the Guile core, so using this module does not
make any difference at the moment.  But it is possible that support for
SRFI-6 will be factored out of the core library in the future, so using
this module does not hurt, after all.

@node SRFI-8
@subsection SRFI-8 - receive
@cindex SRFI-8

@code{receive} is a syntax for making the handling of multiple-value
procedures easier.  It is documented in @xref{Multiple Values}.


@node SRFI-9
@subsection SRFI-9 - define-record-type
@cindex SRFI-9
@cindex record

This SRFI is a syntax for defining new record types and creating
predicate, constructor, and field getter and setter functions.  In
Guile this is simply an alternate interface to the core record
functionality (@pxref{Records}).  It can be used with,

@example
(use-modules (srfi srfi-9))
@end example

@deffn {library syntax} define-record-type type @* (constructor fieldname @dots{}) @* predicate @* (fieldname accessor [modifier]) @dots{}
@sp 1
Create a new record type, and make various @code{define}s for using
it.  This syntax can only occur at the top-level, not nested within
some other form.

@var{type} is bound to the record type, which is as per the return
from the core @code{make-record-type}.  @var{type} also provides the
name for the record, as per @code{record-type-name}.

@var{constructor} is bound to a function to be called as
@code{(@var{constructor} fieldval @dots{})} to create a new record of
this type.  The arguments are initial values for the fields, one
argument for each field, in the order they appear in the
@code{define-record-type} form.

The @var{fieldname}s provide the names for the record fields, as per
the core @code{record-type-fields} etc, and are referred to in the
subsequent accessor/modifier forms.

@var{predicate} is bound to a function to be called as
@code{(@var{predicate} obj)}.  It returns @code{#t} or @code{#f}
according to whether @var{obj} is a record of this type.

Each @var{accessor} is bound to a function to be called
@code{(@var{accessor} record)} to retrieve the respective field from a
@var{record}.  Similarly each @var{modifier} is bound to a function to
be called @code{(@var{modifier} record val)} to set the respective
field in a @var{record}.
@end deffn

@noindent
An example will illustrate typical usage,

@example
(define-record-type employee-type
  (make-employee name age salary)
  employee?
  (name    get-employee-name)
  (age     get-employee-age    set-employee-age)
  (salary  get-employee-salary set-employee-salary))
@end example

This creates a new employee data type, with name, age and salary
fields.  Accessor functions are created for each field, but no
modifier function for the name (the intention in this example being
that it's established only when an employee object is created).  These
can all then be used as for example,

@example
employee-type @result{} #<record-type employee-type>

(define fred (make-employee "Fred" 45 20000.00))

(employee? fred)        @result{} #t
(get-employee-age fred) @result{} 45
(set-employee-salary fred 25000.00)  ;; pay rise
@end example

The functions created by @code{define-record-type} are ordinary
top-level @code{define}s.  They can be redefined or @code{set!} as
desired, exported from a module, etc.

@unnumberedsubsubsec Non-toplevel Record Definitions

The SRFI-9 specification explicitly disallows record definitions in a
non-toplevel context, such as inside @code{lambda} body or inside a
@var{let} block.  However, Guile's implementation does not enforce that
restriction.

@unnumberedsubsubsec Custom Printers

You may use @code{set-record-type-printer!} to customize the default printing
behavior of records.  This is a Guile extension and is not part of SRFI-9.  It
is located in the @nicode{(srfi srfi-9 gnu)} module.

@deffn {Scheme Syntax} set-record-type-printer! name thunk
Where @var{type} corresponds to the first argument of @code{define-record-type},
and @var{thunk} is a procedure accepting two arguments, the record to print, and
an output port.
@end deffn

@noindent
This example prints the employee's name in brackets, for instance @code{[Fred]}.

@example
(set-record-type-printer! employee-type
  (lambda (record port)
    (write-char #\[ port)
    (display (get-employee-name record) port)
    (write-char #\] port)))
@end example

@node SRFI-10
@subsection SRFI-10 - Hash-Comma Reader Extension
@cindex SRFI-10

@cindex hash-comma
@cindex #,()
This SRFI implements a reader extension @code{#,()} called hash-comma.
It allows the reader to give new kinds of objects, for use both in
data and as constants or literals in source code.  This feature is
available with

@example
(use-modules (srfi srfi-10))
@end example

@noindent
The new read syntax is of the form

@example
#,(@var{tag} @var{arg}@dots{})
@end example

@noindent
where @var{tag} is a symbol and the @var{arg}s are objects taken as
parameters.  @var{tag}s are registered with the following procedure.

@deffn {Scheme Procedure} define-reader-ctor tag proc
Register @var{proc} as the constructor for a hash-comma read syntax
starting with symbol @var{tag}, i.e.@: @nicode{#,(@var{tag} arg@dots{})}.
@var{proc} is called with the given arguments @code{(@var{proc}
arg@dots{})} and the object it returns is the result of the read.
@end deffn

@noindent
For example, a syntax giving a list of @var{N} copies of an object.

@example
(define-reader-ctor 'repeat
  (lambda (obj reps)
    (make-list reps obj)))

(display '#,(repeat 99 3))
@print{} (99 99 99)
@end example

Notice the quote @nicode{'} when the @nicode{#,( )} is used.  The
@code{repeat} handler returns a list and the program must quote to use
it literally, the same as any other list.  Ie.

@example
(display '#,(repeat 99 3))
@result{}
(display '(99 99 99))
@end example

When a handler returns an object which is self-evaluating, like a
number or a string, then there's no need for quoting, just as there's
no need when giving those directly as literals.  For example an
addition,

@example
(define-reader-ctor 'sum
  (lambda (x y)
    (+ x y)))
(display #,(sum 123 456)) @print{} 579
@end example

A typical use for @nicode{#,()} is to get a read syntax for objects
which don't otherwise have one.  For example, the following allows a
hash table to be given literally, with tags and values, ready for fast
lookup.

@example
(define-reader-ctor 'hash
  (lambda elems
    (let ((table (make-hash-table)))
      (for-each (lambda (elem)
                  (apply hash-set! table elem))
                elems)
      table)))

(define (animal->family animal)
  (hash-ref '#,(hash ("tiger" "cat")
                     ("lion"  "cat")
                     ("wolf"  "dog"))
            animal))

(animal->family "lion") @result{} "cat"
@end example

Or for example the following is a syntax for a compiled regular
expression (@pxref{Regular Expressions}).

@example
(use-modules (ice-9 regex))

(define-reader-ctor 'regexp make-regexp)

(define (extract-angs str)
  (let ((match (regexp-exec '#,(regexp "<([A-Z0-9]+)>") str)))
    (and match
         (match:substring match 1))))

(extract-angs "foo <BAR> quux") @result{} "BAR"
@end example

@sp 1
@nicode{#,()} is somewhat similar to @code{define-macro}
(@pxref{Macros}) in that handler code is run to produce a result, but
@nicode{#,()} operates at the read stage, so it can appear in data for
@code{read} (@pxref{Scheme Read}), not just in code to be executed.

Because @nicode{#,()} is handled at read-time it has no direct access
to variables etc.  A symbol in the arguments is just a symbol, not a
variable reference.  The arguments are essentially constants, though
the handler procedure can use them in any complicated way it might
want.

Once @code{(srfi srfi-10)} has loaded, @nicode{#,()} is available
globally, there's no need to use @code{(srfi srfi-10)} in later
modules.  Similarly the tags registered are global and can be used
anywhere once registered.

There's no attempt to record what previous @nicode{#,()} forms have
been seen, if two identical forms occur then two calls are made to the
handler procedure.  The handler might like to maintain a cache or
similar to avoid making copies of large objects, depending on expected
usage.

In code the best uses of @nicode{#,()} are generally when there's a
lot of objects of a particular kind as literals or constants.  If
there's just a few then some local variables and initializers are
fine, but that becomes tedious and error prone when there's a lot, and
the anonymous and compact syntax of @nicode{#,()} is much better.


@node SRFI-11
@subsection SRFI-11 - let-values
@cindex SRFI-11

@findex let-values
@findex let*-values
This module implements the binding forms for multiple values
@code{let-values} and @code{let*-values}.  These forms are similar to
@code{let} and @code{let*} (@pxref{Local Bindings}), but they support
binding of the values returned by multiple-valued expressions.

Write @code{(use-modules (srfi srfi-11))} to make the bindings
available.

@lisp
(let-values (((x y) (values 1 2))
             ((z f) (values 3 4)))
   (+ x y z f))
@result{}
10
@end lisp

@code{let-values} performs all bindings simultaneously, which means that
no expression in the binding clauses may refer to variables bound in the
same clause list.  @code{let*-values}, on the other hand, performs the
bindings sequentially, just like @code{let*} does for single-valued
expressions.


@node SRFI-13
@subsection SRFI-13 - String Library
@cindex SRFI-13

The SRFI-13 procedures are always available, @xref{Strings}.

@node SRFI-14
@subsection SRFI-14 - Character-set Library
@cindex SRFI-14

The SRFI-14 data type and procedures are always available,
@xref{Character Sets}.

@node SRFI-16
@subsection SRFI-16 - case-lambda
@cindex SRFI-16
@cindex variable arity
@cindex arity, variable

SRFI-16 defines a variable-arity @code{lambda} form,
@code{case-lambda}. This form is available in the default Guile
environment. @xref{Case-lambda}, for more information.

@node SRFI-17
@subsection SRFI-17 - Generalized set!
@cindex SRFI-17

This SRFI implements a generalized @code{set!}, allowing some
``referencing'' functions to be used as the target location of a
@code{set!}.  This feature is available from

@example
(use-modules (srfi srfi-17))
@end example

@noindent
For example @code{vector-ref} is extended so that

@example
(set! (vector-ref vec idx) new-value)
@end example

@noindent
is equivalent to

@example
(vector-set! vec idx new-value)
@end example

The idea is that a @code{vector-ref} expression identifies a location,
which may be either fetched or stored.  The same form is used for the
location in both cases, encouraging visual clarity.  This is similar
to the idea of an ``lvalue'' in C.

The mechanism for this kind of @code{set!} is in the Guile core
(@pxref{Procedures with Setters}).  This module adds definitions of
the following functions as procedures with setters, allowing them to
be targets of a @code{set!},

@quotation
@nicode{car}, @nicode{cdr}, @nicode{caar}, @nicode{cadr},
@nicode{cdar}, @nicode{cddr}, @nicode{caaar}, @nicode{caadr},
@nicode{cadar}, @nicode{caddr}, @nicode{cdaar}, @nicode{cdadr},
@nicode{cddar}, @nicode{cdddr}, @nicode{caaaar}, @nicode{caaadr},
@nicode{caadar}, @nicode{caaddr}, @nicode{cadaar}, @nicode{cadadr},
@nicode{caddar}, @nicode{cadddr}, @nicode{cdaaar}, @nicode{cdaadr},
@nicode{cdadar}, @nicode{cdaddr}, @nicode{cddaar}, @nicode{cddadr},
@nicode{cdddar}, @nicode{cddddr}

@nicode{string-ref}, @nicode{vector-ref}
@end quotation

The SRFI specifies @code{setter} (@pxref{Procedures with Setters}) as
a procedure with setter, allowing the setter for a procedure to be
changed, eg.@: @code{(set! (setter foo) my-new-setter-handler)}.
Currently Guile does not implement this, a setter can only be
specified on creation (@code{getter-with-setter} below).

@defun getter-with-setter
The same as the Guile core @code{make-procedure-with-setter}
(@pxref{Procedures with Setters}).
@end defun


@node SRFI-18
@subsection SRFI-18 - Multithreading support
@cindex SRFI-18

This is an implementation of the SRFI-18 threading and synchronization
library.  The functions and variables described here are provided by

@example
(use-modules (srfi srfi-18))
@end example

As a general rule, the data types and functions in this SRFI-18
implementation are compatible with the types and functions in Guile's
core threading code.  For example, mutexes created with the SRFI-18 
@code{make-mutex} function can be passed to the built-in Guile 
function @code{lock-mutex} (@pxref{Mutexes and Condition Variables}),
and mutexes created with the built-in Guile function @code{make-mutex}
can be passed to the SRFI-18 function @code{mutex-lock!}.  Cases in
which this does not hold true are noted in the following sections.

@menu
* SRFI-18 Threads::             Executing code 
* SRFI-18 Mutexes::             Mutual exclusion devices
* SRFI-18 Condition variables:: Synchronizing of groups of threads
* SRFI-18 Time::                Representation of times and durations
* SRFI-18 Exceptions::          Signalling and handling errors
@end menu

@node SRFI-18 Threads
@subsubsection SRFI-18 Threads

Threads created by SRFI-18 differ in two ways from threads created by 
Guile's built-in thread functions.  First, a thread created by SRFI-18
@code{make-thread} begins in a blocked state and will not start 
execution until @code{thread-start!} is called on it.  Second, SRFI-18
threads are constructed with a top-level exception handler that 
captures any exceptions that are thrown on thread exit.  In all other
regards, SRFI-18 threads are identical to normal Guile threads.

@defun current-thread
Returns the thread that called this function.  This is the same
procedure as the same-named built-in procedure @code{current-thread}
(@pxref{Threads}).
@end defun

@defun thread? obj
Returns @code{#t} if @var{obj} is a thread, @code{#f} otherwise.  This
is the same procedure as the same-named built-in procedure 
@code{thread?} (@pxref{Threads}).
@end defun

@defun make-thread thunk [name]
Call @code{thunk} in a new thread and with a new dynamic state,
returning the new thread and optionally assigning it the object name
@var{name}, which may be any Scheme object.

Note that the name @code{make-thread} conflicts with the 
@code{(ice-9 threads)} function @code{make-thread}.  Applications 
wanting to use both of these functions will need to refer to them by 
different names.
@end defun

@defun thread-name thread
Returns the name assigned to @var{thread} at the time of its creation,
or @code{#f} if it was not given a name.
@end defun

@defun thread-specific thread
@defunx thread-specific-set! thread obj
Get or set the ``object-specific'' property of @var{thread}.  In
Guile's implementation of SRFI-18, this value is stored as an object
property, and will be @code{#f} if not set.
@end defun

@defun thread-start! thread
Unblocks @var{thread} and allows it to begin execution if it has not
done so already.
@end defun

@defun thread-yield!
If one or more threads are waiting to execute, calling 
@code{thread-yield!} forces an immediate context switch to one of them.
Otherwise, @code{thread-yield!} has no effect.  @code{thread-yield!} 
behaves identically to the Guile built-in function @code{yield}.
@end defun

@defun thread-sleep! timeout
The current thread waits until the point specified by the time object
@var{timeout} is reached (@pxref{SRFI-18 Time}).  This blocks the 
thread only if @var{timeout} represents a point in the future.  it is 
an error for @var{timeout} to be @code{#f}.
@end defun

@defun thread-terminate! thread
Causes an abnormal termination of @var{thread}.  If @var{thread} is
not already terminated, all mutexes owned by @var{thread} become
unlocked/abandoned.  If @var{thread} is the current thread, 
@code{thread-terminate!} does not return.  Otherwise 
@code{thread-terminate!} returns an unspecified value; the termination
of @var{thread} will occur before @code{thread-terminate!} returns.  
Subsequent attempts to join on @var{thread} will cause a ``terminated 
thread exception'' to be raised.

@code{thread-terminate!} is compatible with the thread cancellation
procedures in the core threads API (@pxref{Threads}) in that if a 
cleanup handler has been installed for the target thread, it will be 
called before the thread exits and its return value (or exception, if
any) will be stored for later retrieval via a call to 
@code{thread-join!}.
@end defun

@defun thread-join! thread [timeout [timeout-val]]
Wait for @var{thread} to terminate and return its exit value.  When a 
time value @var{timeout} is given, it specifies a point in time where
the waiting should be aborted.  When the waiting is aborted, 
@var{timeout-val} is returned if it is specified; otherwise, a
@code{join-timeout-exception} exception is raised 
(@pxref{SRFI-18 Exceptions}).  Exceptions may also be raised if the 
thread was terminated by a call to @code{thread-terminate!} 
(@code{terminated-thread-exception} will be raised) or if the thread 
exited by raising an exception that was handled by the top-level 
exception handler (@code{uncaught-exception} will be raised; the 
original exception can be retrieved using 
@code{uncaught-exception-reason}).
@end defun


@node SRFI-18 Mutexes
@subsubsection SRFI-18 Mutexes

The behavior of Guile's built-in mutexes is parameterized via a set of
flags passed to the @code{make-mutex} procedure in the core
(@pxref{Mutexes and Condition Variables}).  To satisfy the requirements
for mutexes specified by SRFI-18, the @code{make-mutex} procedure
described below sets the following flags:
@itemize @bullet
@item
@code{recursive}: the mutex can be locked recursively
@item
@code{unchecked-unlock}: attempts to unlock a mutex that is already
unlocked will not raise an exception
@item
@code{allow-external-unlock}: the mutex can be unlocked by any thread,
not just the thread that locked it originally
@end itemize

@defun make-mutex [name]
Returns a new mutex, optionally assigning it the object name 
@var{name}, which may be any Scheme object.  The returned mutex will be
created with the configuration described above.  Note that the name 
@code{make-mutex} conflicts with Guile core function @code{make-mutex}.
Applications wanting to use both of these functions will need to refer 
to them by different names.
@end defun

@defun mutex-name mutex
Returns the name assigned to @var{mutex} at the time of its creation, 
or @code{#f} if it was not given a name.
@end defun

@defun mutex-specific mutex
@defunx mutex-specific-set! mutex obj
Get or set the ``object-specific'' property of @var{mutex}.  In Guile's
implementation of SRFI-18, this value is stored as an object property, 
and will be @code{#f} if not set.
@end defun

@defun mutex-state mutex
Returns information about the state of @var{mutex}.  Possible values 
are:
@itemize @bullet
@item
thread @code{T}: the mutex is in the locked/owned state and thread T
is the owner of the mutex
@item 
symbol @code{not-owned}: the mutex is in the locked/not-owned state
@item
symbol @code{abandoned}: the mutex is in the unlocked/abandoned state
@item
symbol @code{not-abandoned}: the mutex is in the 
unlocked/not-abandoned state 
@end itemize
@end defun

@defun mutex-lock! mutex [timeout [thread]]
Lock @var{mutex}, optionally specifying a time object @var{timeout}
after which to abort the lock attempt and a thread @var{thread} giving
a new owner for @var{mutex} different than the current thread.  This 
procedure has the same behavior as the @code{lock-mutex} procedure in 
the core library.
@end defun

@defun mutex-unlock! mutex [condition-variable [timeout]]
Unlock @var{mutex}, optionally specifying a condition variable
@var{condition-variable} on which to wait, either indefinitely or,
optionally, until the time object @var{timeout} has passed, to be
signalled.  This procedure has the same behavior as the 
@code{unlock-mutex} procedure in the core library.
@end defun


@node SRFI-18 Condition variables
@subsubsection SRFI-18 Condition variables

SRFI-18 does not specify a ``wait'' function for condition variables.
Waiting on a condition variable can be simulated using the SRFI-18
@code{mutex-unlock!} function described in the previous section, or
Guile's built-in @code{wait-condition-variable} procedure can be used.

@defun condition-variable? obj
Returns @code{#t} if @var{obj} is a condition variable, @code{#f}
otherwise.  This is the same procedure as the same-named built-in 
procedure
(@pxref{Mutexes and Condition Variables, @code{condition-variable?}}).
@end defun

@defun make-condition-variable [name]
Returns a new condition variable, optionally assigning it the object
name @var{name}, which may be any Scheme object.  This procedure 
replaces a procedure of the same name in the core library.
@end defun

@defun condition-variable-name condition-variable
Returns the name assigned to @var{condition-variable} at the time of its
creation, or @code{#f} if it was not given a name.
@end defun

@defun condition-variable-specific condition-variable
@defunx condition-variable-specific-set! condition-variable obj
Get or set the ``object-specific'' property of 
@var{condition-variable}.  In Guile's implementation of SRFI-18, this
value is stored as an object property, and will be @code{#f} if not 
set.
@end defun

@defun condition-variable-signal! condition-variable
@defunx condition-variable-broadcast! condition-variable
Wake up one thread that is waiting for @var{condition-variable}, in
the case of @code{condition-variable-signal!}, or all threads waiting
for it, in the case of @code{condition-variable-broadcast!}.  The
behavior of these procedures is equivalent to that of the procedures
@code{signal-condition-variable} and 
@code{broadcast-condition-variable} in the core library.
@end defun


@node SRFI-18 Time
@subsubsection SRFI-18 Time

The SRFI-18 time functions manipulate time in two formats: a 
``time object'' type that represents an absolute point in time in some 
implementation-specific way; and the number of seconds since some 
unspecified ``epoch''.  In Guile's implementation, the epoch is the
Unix epoch, 00:00:00 UTC, January 1, 1970.

@defun current-time
Return the current time as a time object.  This procedure replaces 
the procedure of the same name in the core library, which returns the
current time in seconds since the epoch.
@end defun

@defun time? obj
Returns @code{#t} if @var{obj} is a time object, @code{#f} otherwise.
@end defun

@defun time->seconds time
@defunx seconds->time seconds
Convert between time objects and numerical values representing the
number of seconds since the epoch.  When converting from a time object 
to seconds, the return value is the number of seconds between 
@var{time} and the epoch.  When converting from seconds to a time 
object, the return value is a time object that represents a time 
@var{seconds} seconds after the epoch.
@end defun


@node SRFI-18 Exceptions
@subsubsection SRFI-18 Exceptions

SRFI-18 exceptions are identical to the exceptions provided by 
Guile's implementation of SRFI-34.  The behavior of exception 
handlers invoked to handle exceptions thrown from SRFI-18 functions,
however, differs from the conventional behavior of SRFI-34 in that
the continuation of the handler is the same as that of the call to
the function.  Handlers are called in a tail-recursive manner; the
exceptions do not ``bubble up''.

@defun current-exception-handler
Returns the current exception handler.
@end defun

@defun with-exception-handler handler thunk
Installs @var{handler} as the current exception handler and calls the
procedure @var{thunk} with no arguments, returning its value as the 
value of the exception.  @var{handler} must be a procedure that accepts
a single argument. The current exception handler at the time this 
procedure is called will be restored after the call returns.
@end defun

@defun raise obj
Raise @var{obj} as an exception.  This is the same procedure as the
same-named procedure defined in SRFI 34.
@end defun

@defun join-timeout-exception? obj
Returns @code{#t} if @var{obj} is an exception raised as the result of 
performing a timed join on a thread that does not exit within the
specified timeout, @code{#f} otherwise.
@end defun

@defun abandoned-mutex-exception? obj
Returns @code{#t} if @var{obj} is an exception raised as the result of
attempting to lock a mutex that has been abandoned by its owner thread,
@code{#f} otherwise.
@end defun

@defun terminated-thread-exception? obj
Returns @code{#t} if @var{obj} is an exception raised as the result of 
joining on a thread that exited as the result of a call to
@code{thread-terminate!}.
@end defun

@defun uncaught-exception? obj
@defunx uncaught-exception-reason exc
@code{uncaught-exception?} returns @code{#t} if @var{obj} is an 
exception thrown as the result of joining a thread that exited by
raising an exception that was handled by the top-level exception
handler installed by @code{make-thread}.  When this occurs, the 
original exception is preserved as part of the exception thrown by
@code{thread-join!} and can be accessed by calling 
@code{uncaught-exception-reason} on that exception.  Note that
because this exception-preservation mechanism is a side-effect of
@code{make-thread}, joining on threads that exited as described above
but were created by other means will not raise this 
@code{uncaught-exception} error.
@end defun


@node SRFI-19
@subsection SRFI-19 - Time/Date Library
@cindex SRFI-19
@cindex time
@cindex date

This is an implementation of the SRFI-19 time/date library.  The
functions and variables described here are provided by

@example
(use-modules (srfi srfi-19))
@end example

@strong{Caution}: The current code in this module incorrectly extends
the Gregorian calendar leap year rule back prior to the introduction
of those reforms in 1582 (or the appropriate year in various
countries).  The Julian calendar was used prior to 1582, and there
were 10 days skipped for the reform, but the code doesn't implement
that.

This will be fixed some time.  Until then calculations for 1583
onwards are correct, but prior to that any day/month/year and day of
the week calculations are wrong.

@menu
* SRFI-19 Introduction::        
* SRFI-19 Time::                
* SRFI-19 Date::                
* SRFI-19 Time/Date conversions::  
* SRFI-19 Date to string::      
* SRFI-19 String to date::      
@end menu

@node SRFI-19 Introduction
@subsubsection SRFI-19 Introduction

@cindex universal time
@cindex atomic time
@cindex UTC
@cindex TAI
This module implements time and date representations and calculations,
in various time systems, including universal time (UTC) and atomic
time (TAI).

For those not familiar with these time systems, TAI is based on a
fixed length second derived from oscillations of certain atoms.  UTC
differs from TAI by an integral number of seconds, which is increased
or decreased at announced times to keep UTC aligned to a mean solar
day (the orbit and rotation of the earth are not quite constant).

@cindex leap second
So far, only increases in the TAI
@tex
$\leftrightarrow$
@end tex
@ifnottex
<->
@end ifnottex
UTC difference have been needed.  Such an increase is a ``leap
second'', an extra second of TAI introduced at the end of a UTC day.
When working entirely within UTC this is never seen, every day simply
has 86400 seconds.  But when converting from TAI to a UTC date, an
extra 23:59:60 is present, where normally a day would end at 23:59:59.
Effectively the UTC second from 23:59:59 to 00:00:00 has taken two TAI
seconds.

@cindex system clock
In the current implementation, the system clock is assumed to be UTC,
and a table of leap seconds in the code converts to TAI.  See comments
in @file{srfi-19.scm} for how to update this table.

@cindex julian day
@cindex modified julian day
Also, for those not familiar with the terminology, a @dfn{Julian Day}
is a real number which is a count of days and fraction of a day, in
UTC, starting from -4713-01-01T12:00:00Z, ie.@: midday Monday 1 Jan
4713 B.C.  A @dfn{Modified Julian Day} is the same, but starting from
1858-11-17T00:00:00Z, ie.@: midnight 17 November 1858 UTC.  That time
is julian day 2400000.5.

@c  The SRFI-1 spec says -4714-11-24T12:00:00Z (November 24, -4714 at
@c  noon, UTC), but this is incorrect.  It looks like it might have
@c  arisen from the code incorrectly treating years a multiple of 100
@c  but not 400 prior to 1582 as non-leap years, where instead the Julian
@c  calendar should be used so all multiples of 4 before 1582 are leap
@c  years.


@node SRFI-19 Time
@subsubsection SRFI-19 Time
@cindex time

A @dfn{time} object has type, seconds and nanoseconds fields
representing a point in time starting from some epoch.  This is an
arbitrary point in time, not just a time of day.  Although times are
represented in nanoseconds, the actual resolution may be lower.

The following variables hold the possible time types.  For instance
@code{(current-time time-process)} would give the current CPU process
time.

@defvar time-utc
Universal Coordinated Time (UTC).
@cindex UTC
@end defvar

@defvar time-tai
International Atomic Time (TAI).
@cindex TAI
@end defvar

@defvar time-monotonic
Monotonic time, meaning a monotonically increasing time starting from
an unspecified epoch.

Note that in the current implementation @code{time-monotonic} is the
same as @code{time-tai}, and unfortunately is therefore affected by
adjustments to the system clock.  Perhaps this will change in the
future.
@end defvar

@defvar time-duration
A duration, meaning simply a difference between two times.
@end defvar

@defvar time-process
CPU time spent in the current process, starting from when the process
began.
@cindex process time
@end defvar

@defvar time-thread
CPU time spent in the current thread.  Not currently implemented.
@cindex thread time
@end defvar

@sp 1
@defun time? obj
Return @code{#t} if @var{obj} is a time object, or @code{#f} if not.
@end defun

@defun make-time type nanoseconds seconds
Create a time object with the given @var{type}, @var{seconds} and
@var{nanoseconds}.
@end defun

@defun time-type time
@defunx time-nanosecond time
@defunx time-second time
@defunx set-time-type! time type
@defunx set-time-nanosecond! time nsec
@defunx set-time-second! time sec
Get or set the type, seconds or nanoseconds fields of a time object.

@code{set-time-type!} merely changes the field, it doesn't convert the
time value.  For conversions, see @ref{SRFI-19 Time/Date conversions}.
@end defun

@defun copy-time time
Return a new time object, which is a copy of the given @var{time}.
@end defun

@defun current-time [type]
Return the current time of the given @var{type}.  The default
@var{type} is @code{time-utc}.

Note that the name @code{current-time} conflicts with the Guile core
@code{current-time} function (@pxref{Time}) as well as the SRFI-18
@code{current-time} function (@pxref{SRFI-18 Time}).  Applications 
wanting to use more than one of these functions will need to refer to
them by different names.
@end defun

@defun time-resolution [type]
Return the resolution, in nanoseconds, of the given time @var{type}.
The default @var{type} is @code{time-utc}.
@end defun

@defun time<=? t1 t2
@defunx time<? t1 t2
@defunx time=? t1 t2
@defunx time>=? t1 t2
@defunx time>? t1 t2
Return @code{#t} or @code{#f} according to the respective relation
between time objects @var{t1} and @var{t2}.  @var{t1} and @var{t2}
must be the same time type.
@end defun

@defun time-difference t1 t2
@defunx time-difference! t1 t2
Return a time object of type @code{time-duration} representing the
period between @var{t1} and @var{t2}.  @var{t1} and @var{t2} must be
the same time type.

@code{time-difference} returns a new time object,
@code{time-difference!} may modify @var{t1} to form its return.
@end defun

@defun add-duration time duration
@defunx add-duration! time duration
@defunx subtract-duration time duration
@defunx subtract-duration! time duration
Return a time object which is @var{time} with the given @var{duration}
added or subtracted.  @var{duration} must be a time object of type
@code{time-duration}.

@code{add-duration} and @code{subtract-duration} return a new time
object.  @code{add-duration!} and @code{subtract-duration!} may modify
the given @var{time} to form their return.
@end defun


@node SRFI-19 Date
@subsubsection SRFI-19 Date
@cindex date

A @dfn{date} object represents a date in the Gregorian calendar and a
time of day on that date in some timezone.

The fields are year, month, day, hour, minute, second, nanoseconds and
timezone.  A date object is immutable, its fields can be read but they
cannot be modified once the object is created.

@defun date? obj
Return @code{#t} if @var{obj} is a date object, or @code{#f} if not.
@end defun

@defun make-date nsecs seconds minutes hours date month year zone-offset
Create a new date object.
@c
@c  FIXME: What can we say about the ranges of the values.  The
@c  current code looks it doesn't normalize, but expects then in their
@c  usual range already.
@c
@end defun

@defun date-nanosecond date
Nanoseconds, 0 to 999999999.
@end defun

@defun date-second date
Seconds, 0 to 59, or 60 for a leap second.  60 is never seen when working
entirely within UTC, it's only when converting to or from TAI.
@end defun

@defun date-minute date
Minutes, 0 to 59.
@end defun

@defun date-hour date
Hour, 0 to 23.
@end defun

@defun date-day date
Day of the month, 1 to 31 (or less, according to the month).
@end defun

@defun date-month date
Month, 1 to 12.
@end defun

@defun date-year date
Year, eg.@: 2003.  Dates B.C.@: are negative, eg.@: @math{-46} is 46
B.C.  There is no year 0, year @math{-1} is followed by year 1.
@end defun

@defun date-zone-offset date
Time zone, an integer number of seconds east of Greenwich.
@end defun

@defun date-year-day date
Day of the year, starting from 1 for 1st January.
@end defun

@defun date-week-day date
Day of the week, starting from 0 for Sunday.
@end defun

@defun date-week-number date dstartw
Week of the year, ignoring a first partial week.  @var{dstartw} is the
day of the week which is taken to start a week, 0 for Sunday, 1 for
Monday, etc.
@c
@c  FIXME: The spec doesn't say whether numbering starts at 0 or 1.
@c  The code looks like it's 0, if that's the correct intention.
@c
@end defun

@c  The SRFI text doesn't actually give the default for tz-offset, but
@c  the reference implementation has the local timezone and the
@c  conversions functions all specify that, so it should be ok to
@c  document it here.
@c
@defun current-date [tz-offset]
Return a date object representing the current date/time, in UTC offset
by @var{tz-offset}.  @var{tz-offset} is seconds east of Greenwich and
defaults to the local timezone.
@end defun

@defun current-julian-day
@cindex julian day
Return the current Julian Day.
@end defun

@defun current-modified-julian-day
@cindex modified julian day
Return the current Modified Julian Day.
@end defun


@node SRFI-19 Time/Date conversions
@subsubsection SRFI-19 Time/Date conversions
@cindex time conversion
@cindex date conversion

@defun date->julian-day date
@defunx date->modified-julian-day date
@defunx date->time-monotonic date
@defunx date->time-tai date
@defunx date->time-utc date
@end defun
@defun julian-day->date jdn [tz-offset]
@defunx julian-day->time-monotonic jdn
@defunx julian-day->time-tai jdn
@defunx julian-day->time-utc jdn
@end defun
@defun modified-julian-day->date jdn [tz-offset]
@defunx modified-julian-day->time-monotonic jdn
@defunx modified-julian-day->time-tai jdn
@defunx modified-julian-day->time-utc jdn
@end defun
@defun time-monotonic->date time [tz-offset]
@defunx time-monotonic->time-tai time
@defunx time-monotonic->time-tai! time
@defunx time-monotonic->time-utc time
@defunx time-monotonic->time-utc! time
@end defun
@defun time-tai->date time [tz-offset]
@defunx time-tai->julian-day time
@defunx time-tai->modified-julian-day time
@defunx time-tai->time-monotonic time
@defunx time-tai->time-monotonic! time
@defunx time-tai->time-utc time
@defunx time-tai->time-utc! time
@end defun
@defun time-utc->date time [tz-offset]
@defunx time-utc->julian-day time
@defunx time-utc->modified-julian-day time
@defunx time-utc->time-monotonic time
@defunx time-utc->time-monotonic! time
@defunx time-utc->time-tai time
@defunx time-utc->time-tai! time
@sp 1
Convert between dates, times and days of the respective types.  For
instance @code{time-tai->time-utc} accepts a @var{time} object of type
@code{time-tai} and returns an object of type @code{time-utc}.

The @code{!} variants may modify their @var{time} argument to form
their return.  The plain functions create a new object.

For conversions to dates, @var{tz-offset} is seconds east of
Greenwich.  The default is the local timezone, at the given time, as
provided by the system, using @code{localtime} (@pxref{Time}).

On 32-bit systems, @code{localtime} is limited to a 32-bit
@code{time_t}, so a default @var{tz-offset} is only available for
times between Dec 1901 and Jan 2038.  For prior dates an application
might like to use the value in 1902, though some locations have zone
changes prior to that.  For future dates an application might like to
assume today's rules extend indefinitely.  But for correct daylight
savings transitions it will be necessary to take an offset for the
same day and time but a year in range and which has the same starting
weekday and same leap/non-leap (to support rules like last Sunday in
October).
@end defun

@node SRFI-19 Date to string
@subsubsection SRFI-19 Date to string
@cindex date to string
@cindex string, from date

@defun date->string date [format]
Convert a date to a string under the control of a format.
@var{format} should be a string containing @samp{~} escapes, which
will be expanded as per the following conversion table.  The default
@var{format} is @samp{~c}, a locale-dependent date and time.

Many of these conversion characters are the same as POSIX
@code{strftime} (@pxref{Time}), but there are some extras and some
variations.

@multitable {MMMM} {MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM}
@item @nicode{~~} @tab literal ~
@item @nicode{~a} @tab locale abbreviated weekday, eg.@: @samp{Sun}
@item @nicode{~A} @tab locale full weekday, eg.@: @samp{Sunday}
@item @nicode{~b} @tab locale abbreviated month, eg.@: @samp{Jan}
@item @nicode{~B} @tab locale full month, eg.@: @samp{January}
@item @nicode{~c} @tab locale date and time, eg.@: @*
@samp{Fri Jul 14 20:28:42-0400 2000}
@item @nicode{~d} @tab day of month, zero padded, @samp{01} to @samp{31}

@c  Spec says d/m/y, reference implementation says m/d/y.
@c  Apparently the reference code was the intention, but would like to
@c  see an errata published for the spec before contradicting it here.
@c
@c  @item @nicode{~D} @tab date @nicode{~d/~m/~y}

@item @nicode{~e} @tab day of month, blank padded, @samp{ 1} to @samp{31}
@item @nicode{~f} @tab seconds and fractional seconds,
with locale decimal point, eg.@: @samp{5.2}
@item @nicode{~h} @tab same as @nicode{~b}
@item @nicode{~H} @tab hour, 24-hour clock, zero padded, @samp{00} to @samp{23}
@item @nicode{~I} @tab hour, 12-hour clock, zero padded, @samp{01} to @samp{12}
@item @nicode{~j} @tab day of year, zero padded, @samp{001} to @samp{366}
@item @nicode{~k} @tab hour, 24-hour clock, blank padded, @samp{ 0} to @samp{23}
@item @nicode{~l} @tab hour, 12-hour clock, blank padded, @samp{ 1} to @samp{12}
@item @nicode{~m} @tab month, zero padded, @samp{01} to @samp{12}
@item @nicode{~M} @tab minute, zero padded, @samp{00} to @samp{59}
@item @nicode{~n} @tab newline
@item @nicode{~N} @tab nanosecond, zero padded, @samp{000000000} to @samp{999999999}
@item @nicode{~p} @tab locale AM or PM
@item @nicode{~r} @tab time, 12 hour clock, @samp{~I:~M:~S ~p}
@item @nicode{~s} @tab number of full seconds since ``the epoch'' in UTC
@item @nicode{~S} @tab second, zero padded @samp{00} to @samp{60} @*
(usual limit is 59, 60 is a leap second)
@item @nicode{~t} @tab horizontal tab character
@item @nicode{~T} @tab time, 24 hour clock, @samp{~H:~M:~S}
@item @nicode{~U} @tab week of year, Sunday first day of week,
@samp{00} to @samp{52}
@item @nicode{~V} @tab week of year, Monday first day of week,
@samp{01} to @samp{53}
@item @nicode{~w} @tab day of week, 0 for Sunday, @samp{0} to @samp{6}
@item @nicode{~W} @tab week of year, Monday first day of week,
@samp{00} to @samp{52}

@c  The spec has ~x as an apparent duplicate of ~W, and ~X as a locale
@c  date.  The reference code has ~x as the locale date and ~X as a
@c  locale time.  The rule is apparently that the code should be
@c  believed, but would like to see an errata for the spec before
@c  contradicting it here.
@c
@c  @item @nicode{~x} @tab week of year, Monday as first day of week,
@c  @samp{00} to @samp{53}
@c  @item @nicode{~X} @tab locale date, eg.@: @samp{07/31/00}

@item @nicode{~y} @tab year, two digits, @samp{00} to @samp{99}
@item @nicode{~Y} @tab year, full, eg.@: @samp{2003}
@item @nicode{~z} @tab time zone, RFC-822 style
@item @nicode{~Z} @tab time zone symbol (not currently implemented)
@item @nicode{~1} @tab ISO-8601 date, @samp{~Y-~m-~d}
@item @nicode{~2} @tab ISO-8601 time+zone, @samp{~H:~M:~S~z}
@item @nicode{~3} @tab ISO-8601 time, @samp{~H:~M:~S}
@item @nicode{~4} @tab ISO-8601 date/time+zone, @samp{~Y-~m-~dT~H:~M:~S~z}
@item @nicode{~5} @tab ISO-8601 date/time, @samp{~Y-~m-~dT~H:~M:~S}
@end multitable
@end defun

Conversions @samp{~D}, @samp{~x} and @samp{~X} are not currently
described here, since the specification and reference implementation
differ.

Conversion is locale-dependent on systems that support it
(@pxref{Accessing Locale Information}).  @xref{Locales,
@code{setlocale}}, for information on how to change the current
locale.


@node SRFI-19 String to date
@subsubsection SRFI-19 String to date
@cindex string to date
@cindex date, from string

@c  FIXME: Can we say what happens when an incomplete date is
@c  converted?  I.e. fields left as 0, or what?  The spec seems to be
@c  silent on this.

@defun string->date input template
Convert an @var{input} string to a date under the control of a
@var{template} string.  Return a newly created date object.

Literal characters in @var{template} must match characters in
@var{input} and @samp{~} escapes must match the input forms described
in the table below.  ``Skip to'' means characters up to one of the
given type are ignored, or ``no skip'' for no skipping.  ``Read'' is
what's then read, and ``Set'' is the field affected in the date
object.

For example @samp{~Y} skips input characters until a digit is reached,
at which point it expects a year and stores that to the year field of
the date.

@multitable {MMMM} {@nicode{char-alphabetic?}} {MMMMMMMMMMMMMMMMMMMMMMMMM} {@nicode{date-zone-offset}}
@item
@tab Skip to
@tab Read
@tab Set

@item @nicode{~~}
@tab no skip
@tab literal ~
@tab nothing

@item @nicode{~a}
@tab @nicode{char-alphabetic?}
@tab locale abbreviated weekday name
@tab nothing

@item @nicode{~A}
@tab @nicode{char-alphabetic?}
@tab locale full weekday name
@tab nothing

@c  Note that the SRFI spec says that ~b and ~B don't set anything,
@c  but that looks like a mistake.  The reference implementation sets
@c  the month field, which seems sensible and is what we describe
@c  here.

@item @nicode{~b}
@tab @nicode{char-alphabetic?}
@tab locale abbreviated month name
@tab @nicode{date-month}

@item @nicode{~B}
@tab @nicode{char-alphabetic?}
@tab locale full month name
@tab @nicode{date-month}

@item @nicode{~d}
@tab @nicode{char-numeric?}
@tab day of month
@tab @nicode{date-day}

@item @nicode{~e}
@tab no skip
@tab day of month, blank padded
@tab @nicode{date-day}

@item @nicode{~h}
@tab same as @samp{~b}

@item @nicode{~H}
@tab @nicode{char-numeric?}
@tab hour
@tab @nicode{date-hour}

@item @nicode{~k}
@tab no skip
@tab hour, blank padded
@tab @nicode{date-hour}

@item @nicode{~m}
@tab @nicode{char-numeric?}
@tab month
@tab @nicode{date-month}

@item @nicode{~M}
@tab @nicode{char-numeric?}
@tab minute
@tab @nicode{date-minute}

@item @nicode{~S}
@tab @nicode{char-numeric?}
@tab second
@tab @nicode{date-second}

@item @nicode{~y}
@tab no skip
@tab 2-digit year
@tab @nicode{date-year} within 50 years

@item @nicode{~Y}
@tab @nicode{char-numeric?}
@tab year
@tab @nicode{date-year}

@item @nicode{~z}
@tab no skip
@tab time zone
@tab date-zone-offset
@end multitable

Notice that the weekday matching forms don't affect the date object
returned, instead the weekday will be derived from the day, month and
year.

Conversion is locale-dependent on systems that support it
(@pxref{Accessing Locale Information}).  @xref{Locales,
@code{setlocale}}, for information on how to change the current
locale.
@end defun

@node SRFI-23
@subsection SRFI-23 - Error Reporting
@cindex SRFI-23

The SRFI-23 @code{error} procedure is always available.

@node SRFI-26
@subsection SRFI-26 - specializing parameters
@cindex SRFI-26
@cindex parameter specialize
@cindex argument specialize
@cindex specialize parameter

This SRFI provides a syntax for conveniently specializing selected
parameters of a function.  It can be used with,

@example
(use-modules (srfi srfi-26))
@end example

@deffn {library syntax} cut slot1 slot2 @dots{}
@deffnx {library syntax} cute slot1 slot2 @dots{}
Return a new procedure which will make a call (@var{slot1} @var{slot2}
@dots{}) but with selected parameters specialized to given expressions.

An example will illustrate the idea.  The following is a
specialization of @code{write}, sending output to
@code{my-output-port},

@example
(cut write <> my-output-port)
@result{}
(lambda (obj) (write obj my-output-port))
@end example

The special symbol @code{<>} indicates a slot to be filled by an
argument to the new procedure.  @code{my-output-port} on the other
hand is an expression to be evaluated and passed, ie.@: it specializes
the behaviour of @code{write}.

@table @nicode
@item <>
A slot to be filled by an argument from the created procedure.
Arguments are assigned to @code{<>} slots in the order they appear in
the @code{cut} form, there's no way to re-arrange arguments.

The first argument to @code{cut} is usually a procedure (or expression
giving a procedure), but @code{<>} is allowed there too.  For example,

@example
(cut <> 1 2 3)
@result{}
(lambda (proc) (proc 1 2 3))
@end example

@item <...>
A slot to be filled by all remaining arguments from the new procedure.
This can only occur at the end of a @code{cut} form.

For example, a procedure taking a variable number of arguments like
@code{max} but in addition enforcing a lower bound,

@example
(define my-lower-bound 123)

(cut max my-lower-bound <...>)
@result{}
(lambda arglist (apply max my-lower-bound arglist))
@end example
@end table

For @code{cut} the specializing expressions are evaluated each time
the new procedure is called.  For @code{cute} they're evaluated just
once, when the new procedure is created.  The name @code{cute} stands
for ``@code{cut} with evaluated arguments''.  In all cases the
evaluations take place in an unspecified order.

The following illustrates the difference between @code{cut} and
@code{cute},

@example
(cut format <> "the time is ~s" (current-time))
@result{}
(lambda (port) (format port "the time is ~s" (current-time)))

(cute format <> "the time is ~s" (current-time))
@result{}
(let ((val (current-time)))
  (lambda (port) (format port "the time is ~s" val))
@end example

(There's no provision for a mixture of @code{cut} and @code{cute}
where some expressions would be evaluated every time but others
evaluated only once.)

@code{cut} is really just a shorthand for the sort of @code{lambda}
forms shown in the above examples.  But notice @code{cut} avoids the
need to name unspecialized parameters, and is more compact.  Use in
functional programming style or just with @code{map}, @code{for-each}
or similar is typical.

@example
(map (cut * 2 <>) '(1 2 3 4))         

(for-each (cut write <> my-port) my-list)  
@end example
@end deffn

@node SRFI-27
@subsection SRFI-27 - Sources of Random Bits
@cindex SRFI-27

This subsection is based on the
@uref{http://srfi.schemers.org/srfi-27/srfi-27.html, specification of
SRFI-27} written by Sebastian Egner.

@c The copyright notice and license text of the SRFI-27 specification is
@c reproduced below:

@c Copyright (C) Sebastian Egner (2002). All Rights Reserved.

@c Permission is hereby granted, free of charge, to any person obtaining a
@c copy of this software and associated documentation files (the
@c "Software"), to deal in the Software without restriction, including
@c without limitation the rights to use, copy, modify, merge, publish,
@c distribute, sublicense, and/or sell copies of the Software, and to
@c permit persons to whom the Software is furnished to do so, subject to
@c the following conditions:

@c The above copyright notice and this permission notice shall be included
@c in all copies or substantial portions of the Software.

@c THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
@c OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
@c MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
@c NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
@c LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
@c OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
@c WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

This SRFI provides access to a (pseudo) random number generator; for
Guile's built-in random number facilities, which SRFI-27 is implemented
upon, @xref{Random}.  With SRFI-27, random numbers are obtained from a
@emph{random source}, which encapsulates a random number generation
algorithm and its state.

@menu
* SRFI-27 Default Random Source::    Obtaining random numbers
* SRFI-27 Random Sources::           Creating and manipulating random sources
* SRFI-27 Random Number Generators:: Obtaining random number generators
@end menu

@node SRFI-27 Default Random Source
@subsubsection The Default Random Source
@cindex SRFI-27

@defun random-integer n
Return a random number between zero (inclusive) and @var{n} (exclusive),
using the default random source.  The numbers returned have a uniform
distribution.
@end defun

@defun random-real
Return a random number in (0,1), using the default random source.  The
numbers returned have a uniform distribution.
@end defun

@defun default-random-source
A random source from which @code{random-integer} and @code{random-real}
have been derived using @code{random-source-make-integers} and
@code{random-source-make-reals} (@pxref{SRFI-27 Random Number Generators}
for those procedures).  Note that an assignment to
@code{default-random-source} does not change @code{random-integer} or
@code{random-real}; it is also strongly recommended not to assign a new
value.
@end defun

@node SRFI-27 Random Sources
@subsubsection Random Sources
@cindex SRFI-27

@defun make-random-source
Create a new random source.  The stream of random numbers obtained from
each random source created by this procedure will be identical, unless
its state is changed by one of the procedures below.
@end defun

@defun random-source? object
Tests whether @var{object} is a random source.  Random sources are a
disjoint type.
@end defun

@defun random-source-randomize! source
Attempt to set the state of the random source to a truly random value.
The current implementation uses a seed based on the current system time.
@end defun

@defun random-source-pseudo-randomize! source i j
Changes the state of the random source s into the initial state of the
(@var{i}, @var{j})-th independent random source, where @var{i} and
@var{j} are non-negative integers.  This procedure provides a mechanism
to obtain a large number of independent random sources (usually all
derived from the same backbone generator), indexed by two integers. In
contrast to @code{random-source-randomize!}, this procedure is entirely
deterministic.
@end defun

The state associated with a random state can be obtained an reinstated
with the following procedures:

@defun random-source-state-ref source
@defunx random-source-state-set! source state
Get and set the state of a random source.  No assumptions should be made
about the nature of the state object, besides it having an external
representation (i.e.@: it can be passed to @code{write} and subsequently
@code{read} back).
@end defun

@node SRFI-27 Random Number Generators
@subsubsection Obtaining random number generator procedures
@cindex SRFI-27

@defun random-source-make-integers source
Obtains a procedure to generate random integers using the random source
@var{source}.  The returned procedure takes a single argument @var{n},
which must be a positive integer, and returns the next uniformly
distributed random integer from the interval @{0, ..., @var{n}-1@} by
advancing the state of @var{source}.

If an application obtains and uses several generators for the same
random source @var{source}, a call to any of these generators advances
the state of @var{source}.  Hence, the generators do not produce the
same sequence of random integers each but rather share a state. This
also holds for all other types of generators derived from a fixed random
sources.  

While the SRFI text specifies that ``Implementations that support
concurrency make sure that the state of a generator is properly
advanced'', this is currently not the case in Guile's implementation of
SRFI-27, as it would cause a severe performance penalty.  So in
multi-threaded programs, you either must perform locking on random
sources shared between threads yourself, or use different random sources
for multiple threads.
@end defun

@defun random-source-make-reals source
@defunx random-source-make-reals source unit
Obtains a procedure to generate random real numbers @math{0 < x < 1}
using the random source @var{source}.  The procedure rand is called
without arguments.

The optional parameter @var{unit} determines the type of numbers being
produced by the returned procedure and the quantization of the output.
@var{unit} must be a number such that @math{0 < @var{unit} < 1}.  The
numbers created by the returned procedure are of the same numerical type
as @var{unit} and the potential output values are spaced by at most
@var{unit}.  One can imagine rand to create numbers as @var{x} *
@var{unit} where @var{x} is a random integer in @{1, ...,
floor(1/unit)-1@}.  Note, however, that this need not be the way the
values are actually created and that the actual resolution of rand can
be much higher than unit. In case @var{unit} is absent it defaults to a
reasonably small value (related to the width of the mantissa of an
efficient number format).
@end defun

@node SRFI-30
@subsection SRFI-30 - Nested Multi-line Comments
@cindex SRFI-30

Starting from version 2.0, Guile's @code{read} supports SRFI-30/R6RS
nested multi-line comments by default, @ref{Block Comments}.

@node SRFI-31
@subsection SRFI-31 - A special form `rec' for recursive evaluation
@cindex SRFI-31
@cindex recursive expression
@findex rec

SRFI-31 defines a special form that can be used to create
self-referential expressions more conveniently.  The syntax is as
follows:

@example
@group
<rec expression> --> (rec <variable> <expression>)
<rec expression> --> (rec (<variable>+) <body>)
@end group
@end example

The first syntax can be used to create self-referential expressions,
for example:

@lisp
  guile> (define tmp (rec ones (cons 1 (delay ones))))
@end lisp

The second syntax can be used to create anonymous recursive functions:

@lisp
  guile> (define tmp (rec (display-n item n)
                       (if (positive? n)
                           (begin (display n) (display-n (- n 1))))))
  guile> (tmp 42 3)
  424242
  guile>
@end lisp


@node SRFI-34
@subsection SRFI-34 - Exception handling for programs

@cindex SRFI-34
Guile provides an implementation of
@uref{http://srfi.schemers.org/srfi-34/srfi-34.html, SRFI-34's exception
handling mechanisms} as an alternative to its own built-in mechanisms
(@pxref{Exceptions}).  It can be made available as follows:

@lisp
(use-modules (srfi srfi-34))
@end lisp

@c FIXME: Document it.


@node SRFI-35
@subsection SRFI-35 - Conditions

@cindex SRFI-35
@cindex conditions
@cindex exceptions

@uref{http://srfi.schemers.org/srfi-35/srfi-35.html, SRFI-35} implements
@dfn{conditions}, a data structure akin to records designed to convey
information about exceptional conditions between parts of a program.  It
is normally used in conjunction with SRFI-34's @code{raise}:

@lisp
(raise (condition (&message
                    (message "An error occurred"))))
@end lisp

Users can define @dfn{condition types} containing arbitrary information.
Condition types may inherit from one another.  This allows the part of
the program that handles (or ``catches'') conditions to get accurate
information about the exceptional condition that arose.

SRFI-35 conditions are made available using:

@lisp
(use-modules (srfi srfi-35))
@end lisp

The procedures available to manipulate condition types are the
following:

@deffn {Scheme Procedure} make-condition-type id parent field-names
Return a new condition type named @var{id}, inheriting from
@var{parent}, and with the fields whose names are listed in
@var{field-names}.  @var{field-names} must be a list of symbols and must
not contain names already used by @var{parent} or one of its supertypes.
@end deffn

@deffn {Scheme Procedure} condition-type? obj
Return true if @var{obj} is a condition type.
@end deffn

Conditions can be created and accessed with the following procedures:

@deffn {Scheme Procedure} make-condition type . field+value
Return a new condition of type @var{type} with fields initialized as
specified by @var{field+value}, a sequence of field names (symbols) and
values as in the following example:

@lisp
(let ((&ct (make-condition-type 'foo &condition '(a b c))))
  (make-condition &ct 'a 1 'b 2 'c 3))
@end lisp

Note that all fields of @var{type} and its supertypes must be specified.
@end deffn

@deffn {Scheme Procedure} make-compound-condition condition1 condition2 @dots{}
Return a new compound condition composed of @var{conditions}.  The
returned condition has the type of each condition of @var{conditions}
(per @code{condition-has-type?}).
@end deffn

@deffn {Scheme Procedure} condition-has-type? c type
Return true if condition @var{c} has type @var{type}.
@end deffn

@deffn {Scheme Procedure} condition-ref c field-name
Return the value of the field named @var{field-name} from condition @var{c}.

If @var{c} is a compound condition and several underlying condition
types contain a field named @var{field-name}, then the value of the
first such field is returned, using the order in which conditions were
passed to @code{make-compound-condition}.
@end deffn

@deffn {Scheme Procedure} extract-condition c type
Return a condition of condition type @var{type} with the field values
specified by @var{c}.

If @var{c} is a compound condition, extract the field values from the
subcondition belonging to @var{type} that appeared first in the call to
@code{make-compound-condition} that created the condition.
@end deffn

Convenience macros are also available to create condition types and
conditions.

@deffn {library syntax} define-condition-type type supertype predicate field-spec...
Define a new condition type named @var{type} that inherits from
@var{supertype}.  In addition, bind @var{predicate} to a type predicate
that returns true when passed a condition of type @var{type} or any of
its subtypes.  @var{field-spec} must have the form @code{(field
accessor)} where @var{field} is the name of field of @var{type} and
@var{accessor} is the name of a procedure to access field @var{field} in
conditions of type @var{type}.

The example below defines condition type @code{&foo}, inheriting from
@code{&condition} with fields @code{a}, @code{b} and @code{c}:

@lisp
(define-condition-type &foo &condition
  foo-condition?
  (a  foo-a)
  (b  foo-b)
  (c  foo-c))
@end lisp
@end deffn

@deffn {library syntax} condition type-field-binding1 type-field-binding2 @dots{}
Return a new condition or compound condition, initialized according to
@var{type-field-binding1} @var{type-field-binding2} @enddots{}.  Each
@var{type-field-binding} must have the form @code{(type
field-specs...)}, where @var{type} is the name of a variable bound to a
condition type; each @var{field-spec} must have the form
@code{(field-name value)} where @var{field-name} is a symbol denoting
the field being initialized to @var{value}.  As for
@code{make-condition}, all fields must be specified.

The following example returns a simple condition:

@lisp
(condition (&message (message "An error occurred")))
@end lisp

The one below returns a compound condition:

@lisp
(condition (&message (message "An error occurred"))
           (&serious))
@end lisp
@end deffn

Finally, SRFI-35 defines a several standard condition types.

@defvar &condition
This condition type is the root of all condition types.  It has no
fields.
@end defvar

@defvar &message
A condition type that carries a message describing the nature of the
condition to humans.
@end defvar

@deffn {Scheme Procedure} message-condition? c
Return true if @var{c} is of type @code{&message} or one of its
subtypes.
@end deffn

@deffn {Scheme Procedure} condition-message c
Return the message associated with message condition @var{c}.
@end deffn

@defvar &serious
This type describes conditions serious enough that they cannot safely be
ignored.  It has no fields.
@end defvar

@deffn {Scheme Procedure} serious-condition? c
Return true if @var{c} is of type @code{&serious} or one of its
subtypes.
@end deffn

@defvar &error
This condition describes errors, typically caused by something that has
gone wrong in the interaction of the program with the external world or
the user.
@end defvar

@deffn {Scheme Procedure} error? c
Return true if @var{c} is of type @code{&error} or one of its subtypes.
@end deffn

@node SRFI-37
@subsection SRFI-37 - args-fold
@cindex SRFI-37

This is a processor for GNU @code{getopt_long}-style program
arguments.  It provides an alternative, less declarative interface
than @code{getopt-long} in @code{(ice-9 getopt-long)}
(@pxref{getopt-long,,The (ice-9 getopt-long) Module}).  Unlike
@code{getopt-long}, it supports repeated options and any number of
short and long names per option.  Access it with:

@lisp
(use-modules (srfi srfi-37))
@end lisp

@acronym{SRFI}-37 principally provides an @code{option} type and the
@code{args-fold} function.  To use the library, create a set of
options with @code{option} and use it as a specification for invoking
@code{args-fold}.

Here is an example of a simple argument processor for the typical
@samp{--version} and @samp{--help} options, which returns a backwards
list of files given on the command line:

@lisp
(args-fold (cdr (program-arguments))
           (let ((display-and-exit-proc
                  (lambda (msg)
                    (lambda (opt name arg loads)
                      (display msg) (quit)))))
             (list (option '(#\v "version") #f #f
                           (display-and-exit-proc "Foo version 42.0\n"))
                   (option '(#\h "help") #f #f
                           (display-and-exit-proc
                            "Usage: foo scheme-file ..."))))
           (lambda (opt name arg loads)
             (error "Unrecognized option `~A'" name))
           (lambda (op loads) (cons op loads))
           '())
@end lisp

@deffn {Scheme Procedure} option names required-arg? optional-arg? processor
Return an object that specifies a single kind of program option.

@var{names} is a list of command-line option names, and should consist of
characters for traditional @code{getopt} short options and strings for
@code{getopt_long}-style long options.

@var{required-arg?} and @var{optional-arg?} are mutually exclusive;
one or both must be @code{#f}.  If @var{required-arg?}, the option
must be followed by an argument on the command line, such as
@samp{--opt=value} for long options, or an error will be signalled.
If @var{optional-arg?}, an argument will be taken if available.

@var{processor} is a procedure that takes at least 3 arguments, called
when @code{args-fold} encounters the option: the containing option
object, the name used on the command line, and the argument given for
the option (or @code{#f} if none).  The rest of the arguments are
@code{args-fold} ``seeds'', and the @var{processor} should return
seeds as well.
@end deffn

@deffn {Scheme Procedure} option-names opt
@deffnx {Scheme Procedure} option-required-arg? opt
@deffnx {Scheme Procedure} option-optional-arg? opt
@deffnx {Scheme Procedure} option-processor opt
Return the specified field of @var{opt}, an option object, as
described above for @code{option}.
@end deffn

@deffn {Scheme Procedure} args-fold args options unrecognized-option-proc operand-proc seed @dots{}
Process @var{args}, a list of program arguments such as that returned by
@code{(cdr (program-arguments))}, in order against @var{options}, a list
of option objects as described above.  All functions called take the
``seeds'', or the last multiple-values as multiple arguments, starting
with @var{seed} @dots{}, and must return the new seeds.  Return the
final seeds.

Call @code{unrecognized-option-proc}, which is like an option object's
processor, for any options not found in @var{options}.

Call @code{operand-proc} with any items on the command line that are
not named options.  This includes arguments after @samp{--}.  It is
called with the argument in question, as well as the seeds.
@end deffn

@node SRFI-38
@subsection SRFI-38 - External Representation for Data With Shared Structure
@cindex SRFI-38

This subsection is based on
@uref{http://srfi.schemers.org/srfi-38/srfi-38.html, the specification
of SRFI-38} written by Ray Dillinger.

@c Copyright (C) Ray Dillinger 2003. All Rights Reserved.

@c Permission is hereby granted, free of charge, to any person obtaining a
@c copy of this software and associated documentation files (the
@c "Software"), to deal in the Software without restriction, including
@c without limitation the rights to use, copy, modify, merge, publish,
@c distribute, sublicense, and/or sell copies of the Software, and to
@c permit persons to whom the Software is furnished to do so, subject to
@c the following conditions:

@c The above copyright notice and this permission notice shall be included
@c in all copies or substantial portions of the Software.

@c THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
@c OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
@c MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
@c NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
@c LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
@c OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
@c WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

This SRFI creates an alternative external representation for data
written and read using @code{write-with-shared-structure} and
@code{read-with-shared-structure}.  It is identical to the grammar for
external representation for data written and read with @code{write} and
@code{read} given in section 7 of R5RS, except that the single
production

@example
<datum> --> <simple datum> | <compound datum> 
@end example

is replaced by the following five productions:

@example
<datum> --> <defining datum> | <nondefining datum> | <defined datum>
<defining datum> -->  #<indexnum>=<nondefining datum>
<defined datum> --> #<indexnum>#
<nondefining datum> --> <simple datum> | <compound datum> 
<indexnum> --> <digit 10>+
@end example

@deffn {Scheme procedure} write-with-shared-structure obj
@deffnx {Scheme procedure} write-with-shared-structure obj port
@deffnx {Scheme procedure} write-with-shared-structure obj port optarg

Writes an external representation of @var{obj} to the given port.
Strings that appear in the written representation are enclosed in
doublequotes, and within those strings backslash and doublequote
characters are escaped by backslashes.  Character objects are written
using the @code{#\} notation.

Objects which denote locations rather than values (cons cells, vectors,
and non-zero-length strings in R5RS scheme; also Guile's structs,
bytevectors and ports and hash-tables), if they appear at more than one
point in the data being written, are preceded by @samp{#@var{N}=} the
first time they are written and replaced by @samp{#@var{N}#} all
subsequent times they are written, where @var{N} is a natural number
used to identify that particular object.  If objects which denote
locations occur only once in the structure, then
@code{write-with-shared-structure} must produce the same external
representation for those objects as @code{write}.

@code{write-with-shared-structure} terminates in finite time and
produces a finite representation when writing finite data.

@code{write-with-shared-structure} returns an unspecified value. The
@var{port} argument may be omitted, in which case it defaults to the
value returned by @code{(current-output-port)}.  The @var{optarg}
argument may also be omitted.  If present, its effects on the output and
return value are unspecified but @code{write-with-shared-structure} must
still write a representation that can be read by
@code{read-with-shared-structure}.  Some implementations may wish to use
@var{optarg} to specify formatting conventions, numeric radixes, or
return values.  Guile's implementation ignores @var{optarg}.

For example, the code

@lisp
(begin (define a (cons 'val1 'val2))
       (set-cdr! a a)
       (write-with-shared-structure a))
@end lisp

should produce the output @code{#1=(val1 . #1#)}.  This shows a cons
cell whose @code{cdr} contains itself.

@end deffn

@deffn {Scheme procedure} read-with-shared-structure
@deffnx {Scheme procedure} read-with-shared-structure port

@code{read-with-shared-structure} converts the external representations
of Scheme objects produced by @code{write-with-shared-structure} into
Scheme objects.  That is, it is a parser for the nonterminal
@samp{<datum>} in the augmented external representation grammar defined
above.  @code{read-with-shared-structure} returns the next object
parsable from the given input port, updating @var{port} to point to the
first character past the end of the external representation of the
object.

If an end-of-file is encountered in the input before any characters are
found that can begin an object, then an end-of-file object is returned.
The port remains open, and further attempts to read it (by
@code{read-with-shared-structure} or @code{read} will also return an
end-of-file object.  If an end of file is encountered after the
beginning of an object's external representation, but the external
representation is incomplete and therefore not parsable, an error is
signalled.

The @var{port} argument may be omitted, in which case it defaults to the
value returned by @code{(current-input-port)}.  It is an error to read
from a closed port.

@end deffn

@node SRFI-39
@subsection SRFI-39 - Parameters
@cindex SRFI-39

This SRFI adds support for dynamically-scoped parameters.  SRFI 39 is
implemented in the Guile core; there's no module needed to get SRFI-39
itself.  Parameters are documented in @ref{Parameters}.

This module does export one extra function: @code{with-parameters*}.
This is a Guile-specific addition to the SRFI, similar to the core
@code{with-fluids*} (@pxref{Fluids and Dynamic States}).

@defun with-parameters* param-list value-list thunk
Establish a new dynamic scope, as per @code{parameterize} above,
taking parameters from @var{param-list} and corresponding values from
@var{value-list}.  A call @code{(@var{thunk})} is made in the new
scope and the result from that @var{thunk} is the return from
@code{with-parameters*}.
@end defun

@node SRFI-42
@subsection SRFI-42 - Eager Comprehensions
@cindex SRFI-42

See @uref{http://srfi.schemers.org/srfi-42/srfi-42.html, the
specification of SRFI-42}.

@node SRFI-45
@subsection SRFI-45 - Primitives for Expressing Iterative Lazy Algorithms
@cindex SRFI-45

This subsection is based on @uref{http://srfi.schemers.org/srfi-45/srfi-45.html, the
specification of SRFI-45} written by Andr@'e van Tonder.

@c Copyright (C) André van Tonder (2003). All Rights Reserved.

@c Permission is hereby granted, free of charge, to any person obtaining a
@c copy of this software and associated documentation files (the
@c "Software"), to deal in the Software without restriction, including
@c without limitation the rights to use, copy, modify, merge, publish,
@c distribute, sublicense, and/or sell copies of the Software, and to
@c permit persons to whom the Software is furnished to do so, subject to
@c the following conditions:

@c The above copyright notice and this permission notice shall be included
@c in all copies or substantial portions of the Software.

@c THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
@c OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
@c MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
@c NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
@c LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
@c OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
@c WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Lazy evaluation is traditionally simulated in Scheme using @code{delay}
and @code{force}.  However, these primitives are not powerful enough to
express a large class of lazy algorithms that are iterative.  Indeed, it
is folklore in the Scheme community that typical iterative lazy
algorithms written using delay and force will often require unbounded
memory.

This SRFI provides set of three operations: @{@code{lazy}, @code{delay},
@code{force}@}, which allow the programmer to succinctly express lazy
algorithms while retaining bounded space behavior in cases that are
properly tail-recursive.  A general recipe for using these primitives is
provided. An additional procedure @code{eager} is provided for the
construction of eager promises in cases where efficiency is a concern.

Although this SRFI redefines @code{delay} and @code{force}, the
extension is conservative in the sense that the semantics of the subset
@{@code{delay}, @code{force}@} in isolation (i.e., as long as the
program does not use @code{lazy}) agrees with that in R5RS.  In other
words, no program that uses the R5RS definitions of delay and force will
break if those definition are replaced by the SRFI-45 definitions of
delay and force.

@deffn {Scheme Syntax} delay expression
Takes an expression of arbitrary type @var{a} and returns a promise of
type @code{(Promise @var{a})} which at some point in the future may be
asked (by the @code{force} procedure) to evaluate the expression and
deliver the resulting value.
@end deffn

@deffn {Scheme Syntax} lazy expression
Takes an expression of type @code{(Promise @var{a})} and returns a
promise of type @code{(Promise @var{a})} which at some point in the
future may be asked (by the @code{force} procedure) to evaluate the
expression and deliver the resulting promise.
@end deffn

@deffn {Scheme Procedure} force expression
Takes an argument of type @code{(Promise @var{a})} and returns a value
of type @var{a} as follows: If a value of type @var{a} has been computed
for the promise, this value is returned.  Otherwise, the promise is
first evaluated, then overwritten by the obtained promise or value, and
then force is again applied (iteratively) to the promise.
@end deffn

@deffn {Scheme Procedure} eager expression
Takes an argument of type @var{a} and returns a value of type
@code{(Promise @var{a})}.  As opposed to @code{delay}, the argument is
evaluated eagerly. Semantically, writing @code{(eager expression)} is
equivalent to writing

@lisp
(let ((value expression)) (delay value)).
@end lisp

However, the former is more efficient since it does not require
unnecessary creation and evaluation of thunks. We also have the
equivalence

@lisp
(delay expression) = (lazy (eager expression))
@end lisp
@end deffn

The following reduction rules may be helpful for reasoning about these
primitives.  However, they do not express the memoization and memory
usage semantics specified above:

@lisp
(force (delay expression)) -> expression
(force (lazy  expression)) -> (force expression)
(force (eager value))      -> value
@end lisp

@subsubheading Correct usage

We now provide a general recipe for using the primitives @{@code{lazy},
@code{delay}, @code{force}@} to express lazy algorithms in Scheme.  The
transformation is best described by way of an example: Consider the
stream-filter algorithm, expressed in a hypothetical lazy language as

@lisp
(define (stream-filter p? s)
  (if (null? s) '()
      (let ((h (car s))
            (t (cdr s)))
        (if (p? h)
            (cons h (stream-filter p? t))
            (stream-filter p? t)))))
@end lisp

This algorithm can be expressed as follows in Scheme:

@lisp
(define (stream-filter p? s)
  (lazy
     (if (null? (force s)) (delay '())
         (let ((h (car (force s)))
               (t (cdr (force s))))
           (if (p? h)
               (delay (cons h (stream-filter p? t)))
               (stream-filter p? t))))))
@end lisp

In other words, we

@itemize @bullet
@item
wrap all constructors (e.g., @code{'()}, @code{cons}) with @code{delay},
@item 
apply @code{force} to arguments of deconstructors (e.g., @code{car},
@code{cdr} and @code{null?}),
@item
wrap procedure bodies with @code{(lazy ...)}.
@end itemize

@node SRFI-55
@subsection SRFI-55 - Requiring Features
@cindex SRFI-55

SRFI-55 provides @code{require-extension} which is a portable
mechanism to load selected SRFI modules.  This is implemented in the
Guile core, there's no module needed to get SRFI-55 itself.

@deffn {library syntax} require-extension clause1 clause2 @dots{}
Require the features of @var{clause1} @var{clause2} @dots{}  , throwing
an error if any are unavailable.

A @var{clause} is of the form @code{(@var{identifier} arg...)}.  The
only @var{identifier} currently supported is @code{srfi} and the
arguments are SRFI numbers.  For example to get SRFI-1 and SRFI-6,

@example
(require-extension (srfi 1 6))
@end example

@code{require-extension} can only be used at the top-level.

A Guile-specific program can simply @code{use-modules} to load SRFIs
not already in the core, @code{require-extension} is for programs
designed to be portable to other Scheme implementations.
@end deffn


@node SRFI-60
@subsection SRFI-60 - Integers as Bits
@cindex SRFI-60
@cindex integers as bits
@cindex bitwise logical

This SRFI provides various functions for treating integers as bits and
for bitwise manipulations.  These functions can be obtained with,

@example
(use-modules (srfi srfi-60))
@end example

Integers are treated as infinite precision twos-complement, the same
as in the core logical functions (@pxref{Bitwise Operations}).  And
likewise bit indexes start from 0 for the least significant bit.  The
following functions in this SRFI are already in the Guile core,

@quotation
@code{logand},
@code{logior},
@code{logxor},
@code{lognot},
@code{logtest},
@code{logcount},
@code{integer-length},
@code{logbit?},
@code{ash}
@end quotation

@sp 1
@defun bitwise-and n1 ...
@defunx bitwise-ior n1 ...
@defunx bitwise-xor n1 ...
@defunx bitwise-not n
@defunx any-bits-set? j k
@defunx bit-set? index n
@defunx arithmetic-shift n count
@defunx bit-field n start end
@defunx bit-count n
Aliases for @code{logand}, @code{logior}, @code{logxor},
@code{lognot}, @code{logtest}, @code{logbit?}, @code{ash},
@code{bit-extract} and @code{logcount} respectively.

Note that the name @code{bit-count} conflicts with @code{bit-count} in
the core (@pxref{Bit Vectors}).
@end defun

@defun bitwise-if mask n1 n0
@defunx bitwise-merge mask n1 n0
Return an integer with bits selected from @var{n1} and @var{n0}
according to @var{mask}.  Those bits where @var{mask} has 1s are taken
from @var{n1}, and those where @var{mask} has 0s are taken from
@var{n0}.

@example
(bitwise-if 3 #b0101 #b1010) @result{} 9
@end example
@end defun

@defun log2-binary-factors n
@defunx first-set-bit n
Return a count of how many factors of 2 are present in @var{n}.  This
is also the bit index of the lowest 1 bit in @var{n}.  If @var{n} is
0, the return is @math{-1}.

@example
(log2-binary-factors 6) @result{} 1
(log2-binary-factors -8) @result{} 3
@end example
@end defun

@defun copy-bit index n newbit
Return @var{n} with the bit at @var{index} set according to
@var{newbit}.  @var{newbit} should be @code{#t} to set the bit to 1,
or @code{#f} to set it to 0.  Bits other than at @var{index} are
unchanged in the return.

@example
(copy-bit 1 #b0101 #t) @result{} 7
@end example
@end defun

@defun copy-bit-field n newbits start end
Return @var{n} with the bits from @var{start} (inclusive) to @var{end}
(exclusive) changed to the value @var{newbits}.

The least significant bit in @var{newbits} goes to @var{start}, the
next to @math{@var{start}+1}, etc.  Anything in @var{newbits} past the
@var{end} given is ignored.

@example
(copy-bit-field #b10000 #b11 1 3) @result{} #b10110
@end example
@end defun

@defun rotate-bit-field n count start end
Return @var{n} with the bit field from @var{start} (inclusive) to
@var{end} (exclusive) rotated upwards by @var{count} bits.

@var{count} can be positive or negative, and it can be more than the
field width (it'll be reduced modulo the width).

@example
(rotate-bit-field #b0110 2 1 4) @result{} #b1010
@end example
@end defun

@defun reverse-bit-field n start end
Return @var{n} with the bits from @var{start} (inclusive) to @var{end}
(exclusive) reversed.

@example
(reverse-bit-field #b101001 2 4) @result{} #b100101
@end example
@end defun

@defun integer->list n [len]
Return bits from @var{n} in the form of a list of @code{#t} for 1 and
@code{#f} for 0.  The least significant @var{len} bits are returned,
and the first list element is the most significant of those bits.  If
@var{len} is not given, the default is @code{(integer-length @var{n})}
(@pxref{Bitwise Operations}).

@example
(integer->list 6)   @result{} (#t #t #f)
(integer->list 1 4) @result{} (#f #f #f #t)
@end example
@end defun
   
@defun list->integer lst
@defunx booleans->integer bool@dots{}
Return an integer formed bitwise from the given @var{lst} list of
booleans, or for @code{booleans->integer} from the @var{bool}
arguments.

Each boolean is @code{#t} for a 1 and @code{#f} for a 0.  The first
element becomes the most significant bit in the return.

@example
(list->integer '(#t #f #t #f)) @result{} 10
@end example
@end defun


@node SRFI-61
@subsection SRFI-61 - A more general @code{cond} clause

This SRFI extends RnRS @code{cond} to support test expressions that
return multiple values, as well as arbitrary definitions of test
success.  SRFI 61 is implemented in the Guile core; there's no module
needed to get SRFI-61 itself.  Extended @code{cond} is documented in
@ref{Conditionals,, Simple Conditional Evaluation}.

@node SRFI-67
@subsection SRFI-67 - Compare procedures
@cindex SRFI-67

See @uref{http://srfi.schemers.org/srfi-67/srfi-67.html, the
specification of SRFI-67}.

@node SRFI-69
@subsection SRFI-69 - Basic hash tables
@cindex SRFI-69

This is a portable wrapper around Guile's built-in hash table and weak
table support.  @xref{Hash Tables}, for information on that built-in
support.  Above that, this hash-table interface provides association
of equality and hash functions with tables at creation time, so
variants of each function are not required, as well as a procedure
that takes care of most uses for Guile hash table handles, which this
SRFI does not provide as such.

Access it with:

@lisp
(use-modules (srfi srfi-69))
@end lisp

@menu
* SRFI-69 Creating hash tables::  
* SRFI-69 Accessing table items::  
* SRFI-69 Table properties::    
* SRFI-69 Hash table algorithms::  
@end menu

@node SRFI-69 Creating hash tables
@subsubsection Creating hash tables

@deffn {Scheme Procedure} make-hash-table [equal-proc hash-proc #:weak weakness start-size]
Create and answer a new hash table with @var{equal-proc} as the
equality function and @var{hash-proc} as the hashing function.

By default, @var{equal-proc} is @code{equal?}.  It can be any
two-argument procedure, and should answer whether two keys are the
same for this table's purposes.

My default @var{hash-proc} assumes that @code{equal-proc} is no
coarser than @code{equal?}  unless it is literally @code{string-ci=?}.
If provided, @var{hash-proc} should be a two-argument procedure that
takes a key and the current table size, and answers a reasonably good
hash integer between 0 (inclusive) and the size (exclusive).

@var{weakness} should be @code{#f} or a symbol indicating how ``weak''
the hash table is:

@table @code
@item #f
An ordinary non-weak hash table.  This is the default.

@item key
When the key has no more non-weak references at GC, remove that entry.

@item value
When the value has no more non-weak references at GC, remove that
entry.

@item key-or-value
When either has no more non-weak references at GC, remove the
association.
@end table

As a legacy of the time when Guile couldn't grow hash tables,
@var{start-size} is an optional integer argument that specifies the
approximate starting size for the hash table, which will be rounded to
an algorithmically-sounder number.
@end deffn

By @dfn{coarser} than @code{equal?}, we mean that for all @var{x} and
@var{y} values where @code{(@var{equal-proc} @var{x} @var{y})},
@code{(equal? @var{x} @var{y})} as well.  If that does not hold for
your @var{equal-proc}, you must provide a @var{hash-proc}.

In the case of weak tables, remember that @dfn{references} above
always refers to @code{eq?}-wise references.  Just because you have a
reference to some string @code{"foo"} doesn't mean that an association
with key @code{"foo"} in a weak-key table @emph{won't} be collected;
it only counts as a reference if the two @code{"foo"}s are @code{eq?},
regardless of @var{equal-proc}.  As such, it is usually only sensible
to use @code{eq?} and @code{hashq} as the equivalence and hash
functions for a weak table.  @xref{Weak References}, for more
information on Guile's built-in weak table support.

@deffn {Scheme Procedure} alist->hash-table alist [equal-proc hash-proc #:weak weakness start-size]
As with @code{make-hash-table}, but initialize it with the
associations in @var{alist}.  Where keys are repeated in @var{alist},
the leftmost association takes precedence.
@end deffn

@node SRFI-69 Accessing table items
@subsubsection Accessing table items

@deffn {Scheme Procedure} hash-table-ref table key [default-thunk]
@deffnx {Scheme Procedure} hash-table-ref/default table key default
Answer the value associated with @var{key} in @var{table}.  If
@var{key} is not present, answer the result of invoking the thunk
@var{default-thunk}, which signals an error instead by default.

@code{hash-table-ref/default} is a variant that requires a third
argument, @var{default}, and answers @var{default} itself instead of
invoking it.
@end deffn

@deffn {Scheme Procedure} hash-table-set! table key new-value
Set @var{key} to @var{new-value} in @var{table}.
@end deffn

@deffn {Scheme Procedure} hash-table-delete! table key
Remove the association of @var{key} in @var{table}, if present.  If
absent, do nothing.
@end deffn

@deffn {Scheme Procedure} hash-table-exists? table key
Answer whether @var{key} has an association in @var{table}.
@end deffn

@deffn {Scheme Procedure} hash-table-update! table key modifier [default-thunk]
@deffnx {Scheme Procedure} hash-table-update!/default table key modifier default
Replace @var{key}'s associated value in @var{table} by invoking
@var{modifier} with one argument, the old value.

If @var{key} is not present, and @var{default-thunk} is provided,
invoke it with no arguments to get the ``old value'' to be passed to
@var{modifier} as above.  If @var{default-thunk} is not provided in
such a case, signal an error.

@code{hash-table-update!/default} is a variant that requires the
fourth argument, which is used directly as the ``old value'' rather
than as a thunk to be invoked to retrieve the ``old value''.
@end deffn

@node SRFI-69 Table properties
@subsubsection Table properties

@deffn {Scheme Procedure} hash-table-size table
Answer the number of associations in @var{table}.  This is guaranteed
to run in constant time for non-weak tables.
@end deffn

@deffn {Scheme Procedure} hash-table-keys table
Answer an unordered list of the keys in @var{table}.
@end deffn

@deffn {Scheme Procedure} hash-table-values table
Answer an unordered list of the values in @var{table}.
@end deffn

@deffn {Scheme Procedure} hash-table-walk table proc
Invoke @var{proc} once for each association in @var{table}, passing
the key and value as arguments.
@end deffn

@deffn {Scheme Procedure} hash-table-fold table proc init
Invoke @code{(@var{proc} @var{key} @var{value} @var{previous})} for
each @var{key} and @var{value} in @var{table}, where @var{previous} is
the result of the previous invocation, using @var{init} as the first
@var{previous} value.  Answer the final @var{proc} result.
@end deffn

@deffn {Scheme Procedure} hash-table->alist table
Answer an alist where each association in @var{table} is an
association in the result.
@end deffn

@node SRFI-69 Hash table algorithms
@subsubsection Hash table algorithms

Each hash table carries an @dfn{equivalence function} and a @dfn{hash
function}, used to implement key lookups.  Beginning users should
follow the rules for consistency of the default @var{hash-proc}
specified above.  Advanced users can use these to implement their own
equivalence and hash functions for specialized lookup semantics.

@deffn {Scheme Procedure} hash-table-equivalence-function hash-table
@deffnx {Scheme Procedure} hash-table-hash-function hash-table
Answer the equivalence and hash function of @var{hash-table}, respectively.
@end deffn

@deffn {Scheme Procedure} hash obj [size]
@deffnx {Scheme Procedure} string-hash obj [size]
@deffnx {Scheme Procedure} string-ci-hash obj [size]
@deffnx {Scheme Procedure} hash-by-identity obj [size]
Answer a hash value appropriate for equality predicate @code{equal?},
@code{string=?}, @code{string-ci=?}, and @code{eq?}, respectively.
@end deffn

@code{hash} is a backwards-compatible replacement for Guile's built-in
@code{hash}.

@node SRFI-88
@subsection SRFI-88 Keyword Objects
@cindex SRFI-88
@cindex keyword objects

@uref{http://srfi.schemers.org/srfi-88/srfi-88.html, SRFI-88} provides
@dfn{keyword objects}, which are equivalent to Guile's keywords
(@pxref{Keywords}).  SRFI-88 keywords can be entered using the
@dfn{postfix keyword syntax}, which consists of an identifier followed
by @code{:} (@pxref{Scheme Read, @code{postfix} keyword syntax}).
SRFI-88 can be made available with:

@example
(use-modules (srfi srfi-88))
@end example

Doing so installs the right reader option for keyword syntax, using
@code{(read-set! keywords 'postfix)}.  It also provides the procedures
described below.

@deffn {Scheme Procedure} keyword? obj
Return @code{#t} if @var{obj} is a keyword.  This is the same procedure
as the same-named built-in procedure (@pxref{Keyword Procedures,
@code{keyword?}}).

@example
(keyword? foo:)         @result{} #t
(keyword? 'foo:)        @result{} #t
(keyword? "foo")        @result{} #f
@end example
@end deffn

@deffn {Scheme Procedure} keyword->string kw
Return the name of @var{kw} as a string, i.e., without the trailing
colon.  The returned string may not be modified, e.g., with
@code{string-set!}.

@example
(keyword->string foo:)  @result{} "foo"
@end example
@end deffn

@deffn {Scheme Procedure} string->keyword str
Return the keyword object whose name is @var{str}.

@example
(keyword->string (string->keyword "a b c"))     @result{} "a b c"
@end example
@end deffn

@node SRFI-98
@subsection SRFI-98 Accessing environment variables.
@cindex SRFI-98
@cindex environment variables

This is a portable wrapper around Guile's built-in support for 
interacting with the current environment, @xref{Runtime Environment}.

@deffn {Scheme Procedure} get-environment-variable name
Returns a string containing the value of the environment variable 
given by the string @code{name}, or @code{#f} if the named 
environment variable is not found.  This is equivalent to 
@code{(getenv name)}.
@end deffn

@deffn {Scheme Procedure} get-environment-variables
Returns the names and values of all the environment variables as an
association list in which both the keys and the values are strings.
@end deffn

@node SRFI-105
@subsection SRFI-105 Curly-infix expressions.
@cindex SRFI-105
@cindex curly-infix
@cindex curly-infix-and-bracket-lists

Guile's built-in reader includes support for SRFI-105 curly-infix
expressions.  See @uref{http://srfi.schemers.org/srfi-105/srfi-105.html,
the specification of SRFI-105}.  Some examples:

@example
@{n <= 5@}                @result{}  (<= n 5)
@{a + b + c@}             @result{}  (+ a b c)
@{a * @{b + c@}@}           @result{}  (* a (+ b c))
@{(- a) / b@}             @result{}  (/ (- a) b)
@{-(a) / b@}              @result{}  (/ (- a) b) as well
@{(f a b) + (g h)@}       @result{}  (+ (f a b) (g h))
@{f(a b) + g(h)@}         @result{}  (+ (f a b) (g h)) as well
@{f[a b] + g(h)@}         @result{}  (+ ($bracket-apply$ f a b) (g h))
'@{a + f(b) + x@}         @result{}  '(+ a (f b) x)
@{length(x) >= 6@}        @result{}  (>= (length x) 6)
@{n-1 + n-2@}             @result{}  (+ n-1 n-2)
@{n * factorial@{n - 1@}@}  @result{}  (* n (factorial (- n 1)))
@{@{a > 0@} and @{b >= 1@}@}  @result{}  (and (> a 0) (>= b 1))
@{f@{n - 1@}(x)@}           @result{}  ((f (- n 1)) x)
@{a . z@}                 @result{}  ($nfx$ a . z)
@{a + b - c@}             @result{}  ($nfx$ a + b - c)
@end example

To enable curly-infix expressions within a file, place the reader
directive @code{#!curly-infix} before the first use of curly-infix
notation.  To globally enable curly-infix expressions in Guile's reader,
set the @code{curly-infix} read option.

Guile also implements the following non-standard extension to SRFI-105:
if @code{curly-infix} is enabled and there is no other meaning assigned
to square brackets (i.e. the @code{square-brackets} read option is
turned off), then lists within square brackets are read as normal lists
but with the special symbol @code{$bracket-list$} added to the front.
To enable this combination of read options within a file, use the reader
directive @code{#!curly-infix-and-bracket-lists}.  For example:

@example
[a b]    @result{}  ($bracket-list$ a b)
[a . b]  @result{}  ($bracket-list$ a . b)
@end example


For more information on reader options, @xref{Scheme Read}.

@c srfi-modules.texi ends here

@c Local Variables:
@c TeX-master: "guile.texi"
@c End: