keyboards/standaside/config.h

   1
   2
   3 #pragma once
   4
   5 #include "config_common.h"
   6
   7 /* USB Device descriptor parameter */
   8 #define VENDOR_ID       0xF7E0
   9 #define PRODUCT_ID      0x0412
  10 #define DEVICE_VER      0x0003
  11 #define MANUFACTURER    Fate Everywhere
  12 #define PRODUCT         Stand Aside
  13 #define DESCRIPTION     A compact 60% keyboard
  14
  15 /* key matrix size */
  16 #define MATRIX_ROWS 8
  17 #define MATRIX_COLS 8
  18
  19 /*
  20  * Keyboard Matrix Assignments
  21  *
  22  * Change this to how you wired your keyboard
  23  * COLS: AVR pins used for columns, left to right
  24  * ROWS: AVR pins used for rows, top to bottom
  25  * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
  26  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  27  *
  28 */
  29 #define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 }
  30 #define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 }
  31 #define UNUSED_PINS {}
  32
  33
  34 /* COL2ROW, ROW2COL */
  35 #define DIODE_DIRECTION COL2ROW
  36
  37 // #define BACKLIGHT_PIN C7
  38 // #define BACKLIGHT_BREATHING
  39 // #define BACKLIGHT_LEVELS 3
  40
  41
  42 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  43 #define DEBOUNCE 5
  44
  45 /* define if matrix has ghost (lacks anti-ghosting diodes) */
  46 //#define MATRIX_HAS_GHOST
  47
  48 /* number of backlight levels */
  49
  50 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  51 #define LOCKING_SUPPORT_ENABLE
  52 /* Locking resynchronize hack */
  53 #define LOCKING_RESYNC_ENABLE
  54
  55 /*
  56  * Enable RGB Underlighting
  57  */
  58 #define RGB_DI_PIN C7
  59 #define RGBLED_NUM 12
  60 #define RGBLIGHT_ANIMATIONS
  61
  62 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
  63  * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
  64  */
  65 // #define GRAVE_ESC_CTRL_OVERRIDE
  66
  67 /*
  68  * Force NKRO
  69  *
  70  * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
  71  * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
  72  * makefile for this to work.)
  73  *
  74  * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
  75  * until the next keyboard reset.
  76  *
  77  * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
  78  * fully operational during normal computer usage.
  79  *
  80  * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
  81  * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
  82  * bootmagic, NKRO mode will always be enabled until it is toggled again during a
  83  * power-up.
  84  *
  85  */
  86 //#define FORCE_NKRO
  87
  88 /*
  89  * Magic Key Options
  90  *
  91  * Magic keys are hotkey commands that allow control over firmware functions of
  92  * the keyboard. They are best used in combination with the HID Listen program,
  93  * found here: https://www.pjrc.com/teensy/hid_listen.html
  94  *
  95  * The options below allow the magic key functionality to be changed. This is
  96  * useful if your keyboard/keypad is missing keys and you want magic key support.
  97  *
  98  */
  99
 100 /* control how magic key switches layers */
 101 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 102 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
 103 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
 104
 105 /* override magic key keymap */
 106 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 107 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 108 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
 109 //#define MAGIC_KEY_HELP1          H
 110 //#define MAGIC_KEY_HELP2          SLASH
 111 //#define MAGIC_KEY_DEBUG          D
 112 //#define MAGIC_KEY_DEBUG_MATRIX   X
 113 //#define MAGIC_KEY_DEBUG_KBD      K
 114 //#define MAGIC_KEY_DEBUG_MOUSE    M
 115 //#define MAGIC_KEY_VERSION        V
 116 //#define MAGIC_KEY_STATUS         S
 117 //#define MAGIC_KEY_CONSOLE        C
 118 //#define MAGIC_KEY_LAYER0_ALT1    ESC
 119 //#define MAGIC_KEY_LAYER0_ALT2    GRAVE
 120 //#define MAGIC_KEY_LAYER0         0
 121 //#define MAGIC_KEY_LAYER1         1
 122 //#define MAGIC_KEY_LAYER2         2
 123 //#define MAGIC_KEY_LAYER3         3
 124 //#define MAGIC_KEY_LAYER4         4
 125 //#define MAGIC_KEY_LAYER5         5
 126 //#define MAGIC_KEY_LAYER6         6
 127 //#define MAGIC_KEY_LAYER7         7
 128 //#define MAGIC_KEY_LAYER8         8
 129 //#define MAGIC_KEY_LAYER9         9
 130 //#define MAGIC_KEY_BOOTLOADER     PAUSE
 131 //#define MAGIC_KEY_LOCK           CAPS
 132 //#define MAGIC_KEY_EEPROM         E
 133 //#define MAGIC_KEY_NKRO           N
 134 //#define MAGIC_KEY_SLEEP_LED      Z
 135
 136 /*
 137  * Feature disable options
 138  *  These options are also useful to firmware size reduction.
 139  */
 140
 141 /* disable debug print */
 142 //#define NO_DEBUG
 143
 144 /* disable print */
 145 //#define NO_PRINT
 146
 147 /* disable action features */
 148 //#define NO_ACTION_LAYER
 149 //#define NO_ACTION_TAPPING
 150 //#define NO_ACTION_ONESHOT
 151 //#define NO_ACTION_MACRO
 152 //#define NO_ACTION_FUNCTION
 153
 154 /*
 155  * MIDI options
 156  */
 157
 158 /* Prevent use of disabled MIDI features in the keymap */
 159 //#define MIDI_ENABLE_STRICT 1
 160
 161 /* enable basic MIDI features:
 162    - MIDI notes can be sent when in Music mode is on
 163 */
 164 //#define MIDI_BASIC
 165
 166 /* enable advanced MIDI features:
 167    - MIDI notes can be added to the keymap
 168    - Octave shift and transpose
 169    - Virtual sustain, portamento, and modulation wheel
 170    - etc.
 171 */
 172 //#define MIDI_ADVANCED
 173
 174 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 175 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 176
 177 /*
 178  * HD44780 LCD Display Configuration
 179  */
 180 /*
 181 #define LCD_LINES           2     //< number of visible lines of the display
 182 #define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
 183
 184 #define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
 185
 186 #if LCD_IO_MODE
 187 #define LCD_PORT         PORTB        //< port for the LCD lines
 188 #define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
 189 #define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
 190 #define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
 191 #define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
 192 #define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
 193 #define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
 194 #define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
 195 #define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
 196 #define LCD_RS_PORT      LCD_PORT     //< port for RS line
 197 #define LCD_RS_PIN       3            //< pin  for RS line
 198 #define LCD_RW_PORT      LCD_PORT     //< port for RW line
 199 #define LCD_RW_PIN       2            //< pin  for RW line
 200 #define LCD_E_PORT       LCD_PORT     //< port for Enable line
 201 #define LCD_E_PIN        1            //< pin  for Enable line
 202 #endif
 203 */