[jackhill/qmk/firmware.git] / keyboards / standaside / config.h



#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID       0xF7E0
#define PRODUCT_ID      0x0412
#define DEVICE_VER      0x0003
#define MANUFACTURER    Fate Everywhere
#define PRODUCT         Stand Aside
#define DESCRIPTION     A compact 60% keyboard

/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
*/
#define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 }
#define UNUSED_PINS {}


/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW

// #define BACKLIGHT_PIN C7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3


/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST

/* number of backlight levels */

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/*
 * Enable RGB Underlighting
 */
#define RGB_DI_PIN C7
#define RGBLED_NUM 12
#define RGBLIGHT_ANIMATIONS

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
// #define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */

/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false

/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1          H
//#define MAGIC_KEY_HELP2          SLASH
//#define MAGIC_KEY_DEBUG          D
//#define MAGIC_KEY_DEBUG_MATRIX   X
//#define MAGIC_KEY_DEBUG_KBD      K
//#define MAGIC_KEY_DEBUG_MOUSE    M
//#define MAGIC_KEY_VERSION        V
//#define MAGIC_KEY_STATUS         S
//#define MAGIC_KEY_CONSOLE        C
//#define MAGIC_KEY_LAYER0_ALT1    ESC
//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
//#define MAGIC_KEY_LAYER0         0
//#define MAGIC_KEY_LAYER1         1
//#define MAGIC_KEY_LAYER2         2
//#define MAGIC_KEY_LAYER3         3
//#define MAGIC_KEY_LAYER4         4
//#define MAGIC_KEY_LAYER5         5
//#define MAGIC_KEY_LAYER6         6
//#define MAGIC_KEY_LAYER7         7
//#define MAGIC_KEY_LAYER8         8
//#define MAGIC_KEY_LAYER9         9
//#define MAGIC_KEY_BOOTLOADER     PAUSE
//#define MAGIC_KEY_LOCK           CAPS
//#define MAGIC_KEY_EEPROM         E
//#define MAGIC_KEY_NKRO           N
//#define MAGIC_KEY_SLEEP_LED      Z

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

/*
 * MIDI options
 */

/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1

/* enable basic MIDI features:
   - MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC

/* enable advanced MIDI features:
   - MIDI notes can be added to the keymap
   - Octave shift and transpose
   - Virtual sustain, portamento, and modulation wheel
   - etc.
*/
//#define MIDI_ADVANCED

/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1

/*
 * HD44780 LCD Display Configuration
 */
/*
#define LCD_LINES           2     //< number of visible lines of the display
#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display

#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode

#if LCD_IO_MODE
#define LCD_PORT         PORTB        //< port for the LCD lines
#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
#define LCD_RS_PORT      LCD_PORT     //< port for RS line
#define LCD_RS_PIN       3            //< pin  for RS line
#define LCD_RW_PORT      LCD_PORT     //< port for RW line
#define LCD_RW_PIN       2            //< pin  for RW line
#define LCD_E_PORT       LCD_PORT     //< port for Enable line
#define LCD_E_PIN        1            //< pin  for Enable line
#endif
*/
Commit	Line	Data
e88a7590 F	1
	2
	3	#pragma once
	4
	5	#include "config_common.h"
	6
	7	/* USB Device descriptor parameter */
	8	#define VENDOR_ID 0xF7E0
	9	#define PRODUCT_ID 0x0412
	10	#define DEVICE_VER 0x0003
	11	#define MANUFACTURER Fate Everywhere
	12	#define PRODUCT Stand Aside
	13	#define DESCRIPTION A compact 60% keyboard
	14
	15	/* key matrix size */
	16	#define MATRIX_ROWS 8
	17	#define MATRIX_COLS 8
	18
	19	/*
	20	* Keyboard Matrix Assignments
	21	*
	22	* Change this to how you wired your keyboard
	23	* COLS: AVR pins used for columns, left to right
	24	* ROWS: AVR pins used for rows, top to bottom
	25	* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
	26	* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
	27	*
	28	*/
	29	#define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 }
	30	#define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 }
	31	#define UNUSED_PINS {}
	32
	33
ef8a4e5a	34	/* COL2ROW, ROW2COL */
e88a7590 F	35	#define DIODE_DIRECTION COL2ROW
	36
	37	// #define BACKLIGHT_PIN C7
	38	// #define BACKLIGHT_BREATHING
	39	// #define BACKLIGHT_LEVELS 3
	40
	41
	42	/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
faaaa134	43	#define DEBOUNCE 5
e88a7590 F	44
	45	/* define if matrix has ghost (lacks anti-ghosting diodes) */
	46	//#define MATRIX_HAS_GHOST
	47
	48	/* number of backlight levels */
	49
	50	/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
	51	#define LOCKING_SUPPORT_ENABLE
	52	/* Locking resynchronize hack */
	53	#define LOCKING_RESYNC_ENABLE
	54
	55	/*
	56	* Enable RGB Underlighting
	57	*/
	58	#define RGB_DI_PIN C7
	59	#define RGBLED_NUM 12
	60	#define RGBLIGHT_ANIMATIONS
	61
	62	/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
	63	* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
	64	*/
	65	// #define GRAVE_ESC_CTRL_OVERRIDE
	66
	67	/*
	68	* Force NKRO
	69	*
	70	* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
	71	* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
	72	* makefile for this to work.)
	73	*
	74	* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
	75	* until the next keyboard reset.
	76	*
	77	* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
	78	* fully operational during normal computer usage.
	79	*
	80	* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
	81	* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
	82	* bootmagic, NKRO mode will always be enabled until it is toggled again during a
	83	* power-up.
	84	*
	85	*/
	86	//#define FORCE_NKRO
	87
	88	/*
	89	* Magic Key Options
	90	*
	91	* Magic keys are hotkey commands that allow control over firmware functions of
	92	* the keyboard. They are best used in combination with the HID Listen program,
	93	* found here: https://www.pjrc.com/teensy/hid_listen.html
	94	*
	95	* The options below allow the magic key functionality to be changed. This is
	96	* useful if your keyboard/keypad is missing keys and you want magic key support.
	97	*
	98	*/
	99
	100	/* control how magic key switches layers */
	101	//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
	102	//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
	103	//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
	104
	105	/* override magic key keymap */
	106	//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
	107	//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
108	//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
109	//#define MAGIC_KEY_HELP1 H
110	//#define MAGIC_KEY_HELP2 SLASH
111	//#define MAGIC_KEY_DEBUG D
112	//#define MAGIC_KEY_DEBUG_MATRIX X
113	//#define MAGIC_KEY_DEBUG_KBD K
114	//#define MAGIC_KEY_DEBUG_MOUSE M
115	//#define MAGIC_KEY_VERSION V
116	//#define MAGIC_KEY_STATUS S
117	//#define MAGIC_KEY_CONSOLE C
118	//#define MAGIC_KEY_LAYER0_ALT1 ESC
119	//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
120	//#define MAGIC_KEY_LAYER0 0
121	//#define MAGIC_KEY_LAYER1 1
122	//#define MAGIC_KEY_LAYER2 2
123	//#define MAGIC_KEY_LAYER3 3
124	//#define MAGIC_KEY_LAYER4 4
125	//#define MAGIC_KEY_LAYER5 5
126	//#define MAGIC_KEY_LAYER6 6
127	//#define MAGIC_KEY_LAYER7 7
128	//#define MAGIC_KEY_LAYER8 8
129	//#define MAGIC_KEY_LAYER9 9
130	//#define MAGIC_KEY_BOOTLOADER PAUSE
131	//#define MAGIC_KEY_LOCK CAPS
132	//#define MAGIC_KEY_EEPROM E
133	//#define MAGIC_KEY_NKRO N
134	//#define MAGIC_KEY_SLEEP_LED Z
135
136	/*
137	* Feature disable options
138	* These options are also useful to firmware size reduction.
139	*/
140
141	/* disable debug print */
142	//#define NO_DEBUG
143
144	/* disable print */
145	//#define NO_PRINT
146
147	/* disable action features */
148	//#define NO_ACTION_LAYER
149	//#define NO_ACTION_TAPPING
150	//#define NO_ACTION_ONESHOT
151	//#define NO_ACTION_MACRO
152	//#define NO_ACTION_FUNCTION
153
154	/*
155	* MIDI options
156	*/
157
158	/* Prevent use of disabled MIDI features in the keymap */
159	//#define MIDI_ENABLE_STRICT 1
160
161	/* enable basic MIDI features:
162	- MIDI notes can be sent when in Music mode is on
163	*/
164	//#define MIDI_BASIC
165
166	/* enable advanced MIDI features:
167	- MIDI notes can be added to the keymap
168	- Octave shift and transpose
169	- Virtual sustain, portamento, and modulation wheel
170	- etc.
171	*/
172	//#define MIDI_ADVANCED
173
174	/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
175	//#define MIDI_TONE_KEYCODE_OCTAVES 1
176
177	/*
178	* HD44780 LCD Display Configuration
179	*/
180	/*
181	#define LCD_LINES 2 //< number of visible lines of the display
182	#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
183
184	#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
185
186	#if LCD_IO_MODE
187	#define LCD_PORT PORTB //< port for the LCD lines
188	#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
189	#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
190	#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
191	#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
192	#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
193	#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
194	#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
195	#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
196	#define LCD_RS_PORT LCD_PORT //< port for RS line
197	#define LCD_RS_PIN 3 //< pin for RS line
198	#define LCD_RW_PORT LCD_PORT //< port for RW line
199	#define LCD_RW_PIN 2 //< pin for RW line
200	#define LCD_E_PORT LCD_PORT //< port for Enable line
201	#define LCD_E_PIN 1 //< pin for Enable line
202	#endif
203	*/