Remove #

diff --git a/box_frame/extras/tube_clamp.scad b/box_frame/extras/tube_clamp.scad
index c05a3b6..3c701ef 100644 (file)
--- a/box_frame/extras/tube_clamp.scad
+++ b/box_frame/extras/tube_clamp.scad
@@ -5,7 +5,7 @@ include <../configuration.scad>;
 $fn=64;
 
 module tube_clamp(tube_r, wall_width=3, endstop=false) {
 $fn=64;
 
 module tube_clamp(tube_r, wall_width=3, endstop=false) {

-    //wall_width is in single_wall_widths, 
+    //wall_width is in single_wall_widths

     difference() {
         union(){
         intersection() {
     difference() {
         union(){
         intersection() {


@@ -16,18 +16,18 @@ module tube_clamp(tube_r, wall_width=3, endstop=false) {
             cylinder(r=tube_r + 5 + wall_width * single_wall_width, h=10);
         }
             if (endstop) {
             cylinder(r=tube_r + 5 + wall_width * single_wall_width, h=10);
         }
             if (endstop) {

-                #translate([-4.5, 5 + tube_r, 0]) cube([4.5, 30, 10]);
+                translate([-4.5, 5 + tube_r, 0]) cube([4.5, 30, 10]);

             }
         }
         translate([0, 0, -0.5]) cylinder(r=tube_r, h=11);
             }
         }
         translate([0, 0, -0.5]) cylinder(r=tube_r, h=11);

-        #translate([-0.5, 0, -0.5]) cube([1, 45, 11]);
+        translate([-0.5, 0, -0.5]) cube([1, 45, 11]);

 
         translate([-7, max (6, tube_r + wall_width * single_wall_width + 0.5) , 5]) {
             rotate([0, 90, 0]) screw(r=1.7, r_head=m3_washer_diameter/2, head_drop=3, slant=false);
             translate([10, 0, 0]) rotate([0, 90, 0]) cylinder(r=m3_nut_diameter_horizontal/2, $fn=6, h=2);
         }
         if (endstop) {
 
         translate([-7, max (6, tube_r + wall_width * single_wall_width + 0.5) , 5]) {
             rotate([0, 90, 0]) screw(r=1.7, r_head=m3_washer_diameter/2, head_drop=3, slant=false);
             translate([10, 0, 0]) rotate([0, 90, 0]) cylinder(r=m3_nut_diameter_horizontal/2, $fn=6, h=2);
         }
         if (endstop) {

-            #translate([-7, 10 + tube_r, 5]) rotate([0, 90, 0]) {
+            translate([-7, 10 + tube_r, 5]) rotate([0, 90, 0]) {

                 cylinder(r = 1.2, h=10);
                 translate([0, 10, 0])
                 cylinder(r = 1.2, h=10);
                 cylinder(r = 1.2, h=10);
                 translate([0, 10, 0])
                 cylinder(r = 1.2, h=10);