clinton/Smoothieware.git
2015-06-15 Jim MorrisUpdate config
2015-06-15 Jim MorrisMerge pull request #674 from wolfmanjm/feature/handle...
2015-06-15 Jim MorrisMake M117 special to allow entire command to be sent...
2015-06-11 Jim MorrisMerge pull request #673 from DouglasPearless/feature...
2015-06-11 Douglas Pearless modified: src/modules/robot/arm_solutions/RotatableD...
2015-06-11 Douglas Pearless modified: src/modules/robot/arm_solutions/RotatableD...
2015-06-11 Douglas Pearless modified: src/modules/robot/arm_solutions/RotatableD...
2015-06-10 Douglas Pearless modified: ConfigSamples/README.TXT
2015-06-10 Douglas Pearless deleted: ConfigSamples/FirePick.delta/config.FirePi...
2015-06-10 Douglas Pearless modified: src/modules/robot/arm_solutions/RotatableD...
2015-06-10 Douglas Pearless modified: ConfigSamples/FirePick.delta/config
2015-06-10 Douglas Pearless modified: src/modules/robot/arm_solutions/RotatableD...
2015-06-10 Douglas Pearless modified: src/modules/robot/Robot.cpp
2015-06-10 Douglas Pearless modified: src/modules/robot/arm_solutions/RotatableD...
2015-06-10 Douglas Pearless modified: src/modules/robot/Robot.cpp
2015-06-10 Douglas Pearless modified: ConfigSamples/FirePick.delta/config
2015-06-10 Douglas Pearless modified: ConfigSamples/FirePick.delta/config
2015-06-10 Douglas Pearless modified: src/modules/robot/arm_solutions/RotatableD...
2015-06-10 Douglas Pearless modified: src/modules/robot/Robot.cpp
2015-06-10 Douglas Pearless new file: ConfigSamples/FirePick.delta/config
2015-06-07 Jim Morrisupdate firmware.bin
2015-06-07 Jim MorrisMerge pull request #671 from wolfmanjm/upstreamedge
2015-06-07 Jim Morrisfix typos in pull request
2015-06-07 Jim MorrisMerge pull request #670 from JesperKrogPoulsen/fix...
2015-06-07 Jesper Krog... Switched to deque to avoid invalid iterator
2015-06-07 Jesper Krog... Switched to deque to avoid invalid iterator
2015-06-07 Jesper Krog... Fixed invalid std::vector iterator
2015-05-30 Jim Morrisupdate firmware.bin
2015-05-29 Jim MorrisUpdate config
2015-05-29 Jim MorrisUpdate Extruder.cpp
2015-05-29 Jim MorrisUpdate Extruder.cpp
2015-05-23 Jim MorrisMerge pull request #666 from wolfmanjm/feature/filament...
2015-05-23 Jim MorrisMerge remote-tracking branch 'upstream/edge' into featu...
2015-05-23 Jim MorrisMerge pull request #665 from wolfmanjm/add/delta-calibr...
2015-05-14 Jim MorrisMerge remote-tracking branch 'upstream/edge' into add...
2015-05-10 Jim MorrisMerge pull request #664 from flety/patch-2
2015-05-10 damfleUpdate Player.cpp
2015-05-06 Jim MorrisMerge pull request #663 from RepRapMorgan/scaracal_auto...
2015-05-06 Quentin HarleySCARA calibration: Psi calculation bug fixed.
2015-04-29 Jim MorrisMerge remote-tracking branch 'upstream/edge' into add...
2015-04-27 Jim Morrisupdate firmware.bin
2015-04-20 Jim MorrisMerge pull request #658 from flety/patch-1
2015-04-20 damfleUpdate Player.cpp
2015-04-20 damfleAdd the name of the file being printed...
2015-04-17 Jim MorrisMerge remote-tracking branch 'upstream/edge' into add...
2015-04-17 Jim MorrisMerge pull request #657 from RepRapMorgan/zgrid_center
2015-04-17 Quentin HarleyAdded bed centred grid capability
2015-04-13 Jim MorrisMerge remote-tracking branch 'upstream/edge' into add...
2015-04-13 Jim MorrisMerge pull request #654 from wolfmanjm/upstreamedge
2015-04-13 Jim Morrisadd comments
2015-04-13 Jim MorrisAllow T1 M200 on same line with Tn as first command
2015-04-13 Jim Morrisadd comments
2015-04-13 Jim MorrisAllow T1 M200 on same line with Tn as first command
2015-04-07 Jim MorrisMerge pull request #653 from RepRapMorgan/scara_transtrim
2015-04-07 Jim MorrisMerge pull request #652 from RepRapMorgan/zgrid_april
2015-04-07 Quentin HarleyRebased SCARA Cal updates
2015-04-07 Quentin HarleyAdded note about ZGrid "slow" feedrate. It is position...
2015-04-07 Quentin HarleyInitial repairs to ZGrid code - according to issue...
2015-04-06 Jim MorrisMerge pull request #650 from JesperKrogPoulsen/remove...
2015-04-06 Jesper Krog... Not showing hidden files
2015-04-04 Jim MorrisMerge remote-tracking branch 'upstream/edge' into featu...
2015-04-04 Jim Morrisadd delta calibration probe command
2015-03-24 Jim MorrisMerge pull request #647 from wolfmanjm/upstreamedge
2015-03-24 Jim MorrisFix #646
2015-03-20 Jim MorrisMerge pull request #644 from wolfmanjm/fix/switch-execution
2015-03-19 Jim MorrisMake switch wait for queue rather than use on_gcode_exe...
2015-03-09 Jim Morrisstop repeating messages when bulge detected
2015-03-02 Jim Morrisadd sample config
2015-03-02 Jim Morrisupdate firmware.bin
2015-03-01 Jim Morrisadd settings for filament detector
2015-03-01 Jim Morrisadded Mxxx commands to control filament detector
2015-02-28 Jim Morrismodify makefile so excluded modules can be included...
2015-02-28 Jim Morrisadd bulge pin
2015-02-28 Jim MorrisFist hack at filament detector module
2015-02-27 Jim MorrisMerge pull request #631 from RepRapMorgan/scaralimits
2015-02-27 Quentin HarleyAdded config parameters to define regions close to...
2015-02-26 Jim MorrisMerge pull request #586 from RepRapMorgan/mintemp
2015-02-26 Jim MorrisUpdate ZGridStrategy.cpp
2015-02-26 Jim MorrisMerge pull request #629 from RepRapMorgan/repairzgrid
2015-02-26 Jim MorrisMerge pull request #628 from sorki/zgrid
2015-02-26 Quentin Harleychanged the gridname sizeof to match the usual protocol
2015-02-26 Richard Markozgrid: fix doProbing indentation
2015-02-26 Richard Markozgrid: handle public data request failure
2015-02-26 Richard Markozgrid: fix null pointer deallocation
2015-02-26 Richard Markozgrid: fix documentation and default bed_z
2015-02-25 Jim MorrisMerge pull request #618 from RepRapMorgan/zgrid
2015-02-25 Jim MorrisMerge pull request #627 from wolfmanjm/upstreamedge
2015-02-25 Jim Morrisadd include
2015-02-23 Jim MorrisMerge pull request #626 from wolfmanjm/upstreamedge
2015-02-23 Jim Morriscooment out mm_per_line_segment by default, no need...
2015-02-23 Jim MorrisMerge pull request #621 from minad/m32-fix
2015-02-23 Daniel Mendlerplayer: only file_size signed
2015-02-23 Daniel Mendlerplayer: use signed variables to represent error values
2015-02-23 Daniel Mendlerplayer m32: not only file_size was forgotten...
2015-02-23 Daniel Mendlerplayer: M32 file_size was not initialized properly.
2015-02-23 Jim MorrisMerge pull request #624 from minad/upload-send-ok
2015-02-23 Daniel Mendlergcode dispatch: send ok for M28/M29 upload gcodes
2015-02-22 Quentin Harleyreplaced sprintf with snprintf
2015-02-22 Jim MorrisUpdate Thermistor.h
2015-02-21 Quentin Harleymake it Gcode compatible...
next