return pos_byte;
}
-/* Determine the direction, a.k.a. base embedding level, of the
+/* Determine the base direction, a.k.a. base embedding level, of the
paragraph we are about to iterate through. If DIR is either L2R or
R2L, just use that. Otherwise, determine the paragraph direction
- from the first strong character of the paragraph.
-
- Note that this gives the paragraph separator the same direction as
- the preceding paragraph, even though Emacs generally views the
- separartor as not belonging to any paragraph. */
+ from the first strong directional character of the paragraph.
+
+ NO_DEFAULT_P non-nil means don't default to L2R if the paragraph
+ has no strong directional characters and both DIR and
+ bidi_it->paragraph_dir are NEUTRAL_DIR. In that case, search back
+ in the buffer until a paragraph is found with a strong character,
+ or until hitting BEGV. In the latter case, fall back to L2R. This
+ flag is used in current-bidi-paragraph-direction.
+
+ Note that this function gives the paragraph separator the same
+ direction as the preceding paragraph, even though Emacs generally
+ views the separartor as not belonging to any paragraph. */
void
-bidi_paragraph_init (bidi_dir_t dir, struct bidi_it *bidi_it)
+bidi_paragraph_init (bidi_dir_t dir, struct bidi_it *bidi_it, int no_default_p)
{
EMACS_INT bytepos = bidi_it->bytepos;
+ EMACS_INT pstartbyte;
/* Special case for an empty buffer. */
if (bytepos == BEGV_BYTE && bytepos == ZV_BYTE)
/* We are either at the beginning of a paragraph or in the
middle of it. Find where this paragraph starts. */
- bytepos = bidi_find_paragraph_start (pos, bytepos);
-
+ pstartbyte = bidi_find_paragraph_start (pos, bytepos);
bidi_it->separator_limit = -1;
bidi_it->new_paragraph = 0;
- ch = FETCH_CHAR (bytepos);
- ch_len = CHAR_BYTES (ch);
- pos = BYTE_TO_CHAR (bytepos);
- type = bidi_get_type (ch, NEUTRAL_DIR);
-
- for (pos++, bytepos += ch_len;
- /* NOTE: UAX#9 says to search only for L, AL, or R types of
- characters, and ignore RLE, RLO, LRE, and LRO. However,
- I'm not sure it makes sense to omit those 4; should try
- with and without that to see the effect. */
- (bidi_get_category (type) != STRONG)
- || (bidi_ignore_explicit_marks_for_paragraph_level
- && (type == RLE || type == RLO
- || type == LRE || type == LRO));
- type = bidi_get_type (ch, NEUTRAL_DIR))
- {
- if (type == NEUTRAL_B && bidi_at_paragraph_end (pos, bytepos) >= -1)
- break;
- if (bytepos >= ZV_BYTE)
- {
- /* Pretend there's a paragraph separator at end of buffer. */
- type = NEUTRAL_B;
+
+ /* The following loop is run more than once only if NO_DEFAULT_P
+ is non-zero. */
+ do {
+ bytepos = pstartbyte;
+ ch = FETCH_CHAR (bytepos);
+ ch_len = CHAR_BYTES (ch);
+ pos = BYTE_TO_CHAR (bytepos);
+ type = bidi_get_type (ch, NEUTRAL_DIR);
+
+ for (pos++, bytepos += ch_len;
+ /* NOTE: UAX#9 says to search only for L, AL, or R types
+ of characters, and ignore RLE, RLO, LRE, and LRO.
+ However, I'm not sure it makes sense to omit those 4;
+ should try with and without that to see the effect. */
+ (bidi_get_category (type) != STRONG)
+ || (bidi_ignore_explicit_marks_for_paragraph_level
+ && (type == RLE || type == RLO
+ || type == LRE || type == LRO));
+ type = bidi_get_type (ch, NEUTRAL_DIR))
+ {
+ if (type == NEUTRAL_B && bidi_at_paragraph_end (pos, bytepos) >= -1)
break;
- }
- FETCH_CHAR_ADVANCE (ch, pos, bytepos);
- }
- if (type == STRONG_R || type == STRONG_AL) /* P3 */
- bidi_it->paragraph_dir = R2L;
- else if (type == STRONG_L)
- bidi_it->paragraph_dir = L2R;
+ if (bytepos >= ZV_BYTE)
+ {
+ /* Pretend there's a paragraph separator at end of
+ buffer. */
+ type = NEUTRAL_B;
+ break;
+ }
+ FETCH_CHAR_ADVANCE (ch, pos, bytepos);
+ }
+ if (type == STRONG_R || type == STRONG_AL) /* P3 */
+ bidi_it->paragraph_dir = R2L;
+ else if (type == STRONG_L)
+ bidi_it->paragraph_dir = L2R;
+ if (no_default_p && bidi_it->paragraph_dir == NEUTRAL_DIR)
+ {
+ /* If this paragraph is at BEGV, default to L2R. */
+ if (pstartbyte == BEGV_BYTE)
+ bidi_it->paragraph_dir = L2R; /* P3 and HL1 */
+ else
+ {
+ EMACS_INT prevpbyte = pstartbyte;
+ EMACS_INT p = BYTE_TO_CHAR (pstartbyte), pbyte = pstartbyte;
+
+ /* Find the beginning of the previous paragraph, if any. */
+ while (pbyte > BEGV_BYTE && prevpbyte >= pstartbyte)
+ {
+ p--;
+ pbyte = CHAR_TO_BYTE (p);
+ prevpbyte = bidi_find_paragraph_start (p, pbyte);
+ }
+ pstartbyte = prevpbyte;
+ }
+ }
+ } while (no_default_p && bidi_it->paragraph_dir == NEUTRAL_DIR);
}
else
abort ();
/* Contrary to UAX#9 clause P3, we only default the paragraph
direction to L2R if we have no previous usable paragraph
- direction. */
+ direction. This is allowed by the HL1 clause. */
if (bidi_it->paragraph_dir != L2R && bidi_it->paragraph_dir != R2L)
- bidi_it->paragraph_dir = L2R; /* P3 and ``higher protocols'' */
+ bidi_it->paragraph_dir = L2R; /* P3 and HL1 ``higher-level protocols'' */
if (bidi_it->paragraph_dir == R2L)
bidi_it->level_stack[0].level = 1;
else
not have a chance to do it, if we are going to
skip any text at the beginning, which resets the
FIRST_ELT flag. */
- bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it);
+ bidi_paragraph_init (it->paragraph_embedding,
+ &it->bidi_it, 0);
}
do
{
of a new paragraph, next_element_from_buffer may not have a
chance to do that. */
if (it->bidi_it.first_elt && it->bidi_it.charpos < ZV)
- bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it);
+ bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it, 0);
/* prev_stop can be zero, so check against BEGV as well. */
while (it->bidi_it.charpos >= BEGV
&& it->prev_stop <= it->bidi_it.charpos
/* If this is a new paragraph, determine its base
direction (a.k.a. its base embedding level). */
if (it->bidi_it.new_paragraph)
- bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it);
+ bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it, 0);
bidi_move_to_visually_next (&it->bidi_it);
IT_BYTEPOS (*it) = it->bidi_it.bytepos;
IT_CHARPOS (*it) = it->bidi_it.charpos;
{
/* If we are at the beginning of a line, we can produce the
next element right away. */
- bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it);
+ bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it, 0);
bidi_move_to_visually_next (&it->bidi_it);
}
else
IT_BYTEPOS (*it) = CHAR_TO_BYTE (IT_CHARPOS (*it));
it->bidi_it.charpos = IT_CHARPOS (*it);
it->bidi_it.bytepos = IT_BYTEPOS (*it);
- bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it);
+ bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it, 0);
do
{
/* Now return to buffer position where we were asked to
if (it->bidi_p)
{
if (it->bidi_it.new_paragraph)
- bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it);
+ bidi_paragraph_init (it->paragraph_embedding, &it->bidi_it, 0);
/* Resync the bidi iterator with IT's new position.
FIXME: this doesn't support bidirectional text. */
while (it->bidi_it.charpos < IT_CHARPOS (*it))
itb.bytepos = bytepos;
itb.first_elt = 1;
itb.separator_limit = -1;
+ itb.paragraph_dir = NEUTRAL_DIR;
- bidi_paragraph_init (NEUTRAL_DIR, &itb);
+ bidi_paragraph_init (NEUTRAL_DIR, &itb, 1);
if (buf != current_buffer)
set_buffer_temp (old);
switch (itb.paragraph_dir)
HCoop / bpt / emacs.git / commitdiff