1 2001-12-29 Kim F. Storm <storm@cua.dk>
3 * INSTALL: <CONFIGURATION BY HAND> Now requires autoconf 2.51.
5 2001-12-28 Richard M. Stallman <rms@gnu.org>
7 * configure.in: Test for mbsinit.
9 2001-12-21 Eli Zaretskii <eliz@is.elta.co.il>
11 These changes make Leim part of the standard distribution:
13 * README: Add info about the `leim' directory
15 * INSTALL: Remove text that describes Leim as a separate package.
17 * noleim-Makefile.in: File removed.
19 * make-dist: Don't copy noleim-Makefile.in to the leim subdirectory.
20 Link Leim files to ${tempdir}/leim, not to real-leim. Don't move
21 Leim files out of the Emacs tree. Don't prepare a separate tarball
24 2001-12-11 Richard M. Stallman <rms@gnu.org>
26 * configure.in (hppa*-*-linux-gnu*): New alternative.
28 2001-12-08 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
30 * make-dist: Copy COPYING to leim/, lwlib/, mac/ and nt/ when
31 creating distribution.
33 2001-12-06 Paul Eggert <eggert@twinsun.com>
35 * configure.in (AC_PREREQ): Bump from 2.50 to 2.51; needed for vfork.
36 (AC_FUNC_VFORK): Remove.
38 (HAVE_DES_H, HAVE_KRB5_H): Properly quote args of AC_CHECK_HEADERS;
39 this is required by recent Autoconf versions.
41 2001-12-02 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
43 * make-dist: Do not try to link removed files (aclocal.m4, _emacs,
44 TODO, vms-pp.trans and others).
46 2001-11-29 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
48 * make-dist: Use COPYING from the top-level directory.
50 2001-11-29 Gerd Moellmann <gerd@gnu.org>
52 * configure.in: Add support for FreeBSD/Alpha.
54 2001-11-29 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
56 * make-dist: Add COPYING to the top-level directory of the
57 distribution. Simplify the logic behind copying.
59 * Makefile.in (maybe_bootstrap): Fix previous change.
61 2001-11-28 Richard M. Stallman <rms@gnu.org>
63 * Makefile.in (maybe_bootstrap): Don't bootstrap, just suggest it.
65 2001-11-26 Richard M. Stallman <rms@gnu.org>
67 * Makefile.in: bootstrap should not delete dumped executables.
68 (bootstrap-clean-before): New target.
69 (bootstrap): Use bootstrap-clean-before instead of clean.
70 (bootstrap-clean-after): Renamed from bootstrap-clean. Calls changed.
72 2001-11-24 Eli Zaretskii <eliz@is.elta.co.il>
74 These changes add the Emacs Lisp Introduction manual to the
77 * Makefile.in (install-arch-indep, uninstall): Add ELisp Intro
80 * make-dist: Copy the files in lispintro directory.
82 * config.bat: Configure in the lispintro directory.
84 * configure.in (AC_OUTPUT): Add lispintro/Makefile.
86 * Makefile.in (SUBDIR_MAKEFILES): Add lispintro.
87 (lispintro/Makefile): New target.
88 (mostlyclean, clean, distclean, maintainer-clean): Add lispintro.
89 (unlock, relock, info, dvi): Ditto.
91 2001-11-23 Eli Zaretskii <eliz@is.elta.co.il>
93 * Makefile.in (uninstall, install-arch-indep): Don't install
96 * make-dist (etc): Don't distribute gfdl.1.
98 2001-11-22 Colin Walters <walters@debian.org>
100 * Makefile.in (install-arch-indep): Install the calc .info files.
101 (uninstall): Handle deletion of calc .info files (thanks Pavel
104 2001-11-17 Eli Zaretskii <eliz@is.elta.co.il>
106 * make-dist (lispref): Add *.txt, *.el, permute-index, and
107 tindex.pl to the list of those being put into the distribution.
109 2001-11-16 Eli Zaretskii <eliz@gnu.org>
111 * configure.in: Add coff.h to the list in AC_CHECK_HEADERS.
113 2001-11-15 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
115 * Makefile.in (uninstall): Fix previous change.
117 * configure.in, Makefile.in: Add support for --program-prefix,
118 --program-suffix and --program-transform-name options.
120 2001-11-13 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
122 * Makefile.in (install-arch-indep): Use `${manext}' instead of
124 (install-arch-indep): Install emacsclient manual page.
125 (uninstall): Uninstall emacsclient manual page.
127 2001-11-12 Eli Zaretskii <eliz@is.elta.co.il>
129 * make-dist: Add lispref/index.*perm files to the distribution.
130 From Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>.
132 2001-11-12 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
134 * Makefile.in (uninstall): Remove gfdl.1 when uninstalling.
136 2001-11-10 Eli Zaretskii <eliz@is.elta.co.il>
138 * configure.in: AC_OUTPUT lispref/Makefile.
140 2001-11-10 Eli Zaretskii <eliz@is.elta.co.il>
142 The following changes add the ELisp reference manual to the
145 * make-dist: Add the lispref directory to the distribution.
147 * Makefile.in (install-arch-indep): Add elisp* to the list of
148 installed Info files.
149 (SUBDIR_MAKEFILES): Add lispref/Makefile.
150 (lispref/Makefile): New target.
151 (mostlyclean, clean, distclean, maintainer-clean, unlock, relock):
152 Add commands for the lispref directory.
155 * config.bat: Configure in `lispref'.
157 2001-11-09 Richard M. Stallman <rms@gnu.org>
159 * Makefile.in (bootstrap-lisp): Don't suppress error messages.
161 2001-11-07 Eli Zaretskii <eliz@is.elta.co.il>
163 * make-dist (tempdir): Copy AUTHORS as well.
165 2001-11-06 Sam Steingold <sds@gnu.org>
167 * configure.in: Added a check for <nlist.h>
169 2001-11-01 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
171 * configure.in: Reindent --help output.
172 From Per Starback (starback@ling.uu.se).
174 2001-10-31 Eli Zaretskii <eliz@is.elta.co.il>
176 * configure.in: New entry for HP/UX-11.
178 * Makefile.in (SOURCES): Replace GETTING.GNU.SOFTWARE with FTP.
179 From Eric S. Raymond <esr@golux.thyrsus.com>.
181 2001-10-28 Eli Zaretskii <eliz@is.elta.co.il>
183 * configure.in (s390-*-linux-gnu): New system. From Adam Thornton
184 <athornton@sinenomine.net>.
186 2001-10-25 Gerd Moellmann <gerd@gnu.org>
188 * Makefile.in (maybe_bootstrap): New target.
189 (all): Add to prerequisites to bootstrap if abbrev.elc doesn't
192 2001-10-24 Ken Raeburn <raeburn@gnu.org>
194 * configure.in: If --with-hesiod is given, look for
195 hes_getmailhost and res_send or __res_send; check hesiod and
196 resolv libraries respectively if system libraries don't supply
199 2001-10-24 Gerd Moellmann <gerd@gnu.org>
201 * configure.in: Use $MAKE for `make' if set.
203 2001-10-22 Gerd Moellmann <gerd@gnu.org>
205 * Makefile.in (install-arch-indep): Add -h (follow symlinks)
208 2001-10-20 Gerd Moellmann <gerd@gnu.org>
210 * (Version 21.1 released).
212 2001-10-20 Miles Bader <miles@gnu.org>
214 * configure.in (configuration): Set from `host' if `host_alias'
217 2001-10-19 Andreas Schwab <schwab@suse.de>
219 * configure.in: Make ready for autoconf 2.5x.
220 (AC_PREREQ): Require autoconf 2.50.
221 * aclocal.m4: Removed.
222 * Makefile.in (${srcdir}/configure): Don't depend on aclocal.m4.
224 2001-10-13 Eli Zaretskii <eliz@is.elta.co.il>
226 * README: Bump Emacs version to 21.1.50.
228 2001-10-05 Gerd Moellmann <gerd@gnu.org>
232 2001-09-05 Gerd Moellmann <gerd@gnu.org>
234 * configure.in: Avoid `$@' which is handled specially in
235 Autoconf 2.52. From "Adam J. Richter" <adam@yggdrasil.com>.
237 2001-09-01 Eli Zaretskii <eliz@is.elta.co.il>
239 * make-dist (nt): Add subdirs.el to the list of distributed files.
241 2001-08-14 Eli Zaretskii <eliz@is.elta.co.il>
243 * configure.in (machine): Add an entry for
244 hppa1.1-hitachi-hiuxwe2*.
246 2001-05-28 Gerd Moellmann <gerd@gnu.org>
248 * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
249 LC_MESSAGES and LANG. From Karl Eichwalder <keichwa@gmx.net>.
251 2001-05-14 Gerd Moellmann <gerd@gnu.org>
253 * make-dist: Copy texinfo.tex unconditionally.
255 2001-04-25 Eli Zaretskii <eliz@is.elta.co.il>
257 * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
260 2001-04-06 Gerd Moellmann <gerd@gnu.org>
262 * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
263 Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
265 * make-dist: Handle leim/MISC-DIC. Only include
266 `[a-zA-Z]*.{el,elc}' from leim/quail.
268 2001-04-05 Gerd Moellmann <gerd@gnu.org>
270 * Makefile.in (install-arch-indep): Remove .cvsignore files.
272 2001-03-30 Gerd Moellmann <gerd@gnu.org>
274 * Makefile.in (.PHONY): Add for bootstrap targets.
275 (bootstrap-clean): New target.
276 (bootstrap): Use it instead of `clean'.
278 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
280 * Makefile.in (SUBDIR): Remove leim.
281 (all, .RECURSIVE, extraclean): Add leim explicitly.
282 (leim): Provide separate rule which exports PARALLEL=0 into the
285 2001-03-20 Gerd Moellmann <gerd@gnu.org>
287 * configure.in (HAVE_XPM): Don't print the result of the check for
288 XpmReturnAllocPixels if we don't have an xpm.h.
290 2001-03-05 Gerd Moellmann <gerd@gnu.org>
294 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
296 * config.bat: Update the copyright.
298 2001-02-23 Kenichi Handa <handa@etl.go.jp>
300 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
301 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
302 to `yes'. Later in AC_OUTPUT, check this variable.
304 2001-02-09 Dave Love <fx@gnu.org>
308 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
310 * info/dir (Ebrowse): Fix the entry (was missing a dot).
312 2001-02-02 Gerd Moellmann <gerd@gnu.org>
314 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
316 * Makefile.in (uninstall): Ignore exit code of `rm'.
318 * Makefile.in (uninstall): Remove more info files. Remove
319 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
321 2001-01-31 Gerd Moellmann <gerd@gnu.org>
323 * noleim-Makefile.in (extraclean): Add.
325 2001-01-28 Gerd Moellmann <gerd@gnu.org>
327 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
330 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
332 * Makefile.in (tags): Fix typo.
334 2001-01-13 Kenichi Handa <handa@etl.go.jp>
336 * configure.in: Fix typo in the code setting x_search_path.
338 2001-01-10 Dave Love <fx@gnu.org>
340 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
342 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
343 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
344 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
345 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
348 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
350 * config.bat: Run the preprocessor with -traditional.
352 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
354 * INSTALL: Move copying conditions to end of file.
356 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
358 * INSTALL: Add basic installation procedure which assumes
359 `configure' does its job. Elaborate on image support libraries.
360 Add a pointer to Xaw3d library. Add advice about solving
361 configure-time problems by looking in config.log and setting
362 variables in the environment.
364 2000-12-27 Gerd Moellmann <gerd@gnu.org>
366 * Makefile.in (install-arch-indep): If tar fails, exit with
369 2000-12-19 Gerd Moellmann <gerd@gnu.org>
371 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
372 source file includes XKBlib.h. On some broken Solaris systems,
373 there is an XKBlib.h, reportedly, but header files included by
374 XKBlib.h are missing.
376 2000-12-14 Gerd Moellmann <gerd@gnu.org>
378 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
380 2000-12-11 Dave Love <fx@gnu.org>
382 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
384 2000-12-11 Paul Eggert <eggert@twinsun.com>
386 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
387 Merge fixes from latest GNU tar version. These macros no longer
388 futz with _XOPEN_SOURCE, as that was not portable in practice.
389 (AC_FUNC_FSEEKO): New macro.
391 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
394 2000-12-05 Dave Love <fx@gnu.org>
396 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
398 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
400 * info/dir: Change the category to "Emacs".
402 2000-12-01 Gerd Moellmann <gerd@gnu.org>
404 * make-dist (tempdir): Remove epaths.h from the distribution
407 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
409 * config.bat: Check for existence of djecho.exe, and print an
410 error message if it is not available.
412 * INSTALL: Describe possible problem with djecho.exe in old
413 versions of DJGPP v2.x.
415 2000-11-23 Gerd Moellmann <gerd@gnu.org>
417 * configure.in: Initialize HAVE_LIBXP to no.
419 2000-11-22 Gerd Moellmann <gerd@gnu.org>
421 * configure.in: Use m/macppc.h instead of the non-existent
424 2000-11-21 Gerd Moellmann <gerd@gnu.org>
426 * Makefile.in (install-arch-indep): Also install info/eshell*
429 * configure.in (HAVE_PNG): Check for the presence of
430 png_get_channels to rule out older PNG libs.
432 * configure.in (AC_OUTPUT): Arrange to emit definitions of
433 GCC and NON_GNU_CPP into config.status.
435 2000-11-20 Dave Love <fx@gnu.org>
437 * configure.in: Fix last change.
439 * GETTING.GNU.SOFTWARE: Deleted.
440 * FTP: New file to replace it.
441 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
443 2000-11-20 Gerd Moellmann <gerd@gnu.org>
445 * configure.in: Use -traditional with GNU cpp.
447 2000-11-17 Gerd Moellmann <gerd@gnu.org>
449 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
450 Distribute more files from the nt/ subdir. Distribute PBM
451 image files from subdirs of lisp/. Distribute old change logs
452 from subdirs of lisp/. Distribute play/5x5.el.
454 2000-11-11 Dave Love <fx@gnu.org>
456 * config.sub, config.guess: Updated from master source.
458 2000-11-07 Dave Love <fx@gnu.org>
460 * configure.in: Test for mkstemp.
462 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
464 * info/dir (Top): Rearrange menu items more logically, and put
465 them into a single category. Add menu items for RefTeX and
468 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
470 * Makefile.in (install-arch-indep): Use --info-dir instead of
471 --dir-file, and a simple argument instead of --info-file, so that
472 the Debian version of install-info also works.
474 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
476 * info/dir (Speedbar): Add entry.
478 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
480 * INSTALL: Describe the new image-support options to the configure
481 script. List URLs where image support libraries can be found.
483 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
485 * info/dir (Top): Add an entry for Eshell.
487 2000-10-02 Dave Love <fx@gnu.org>
489 * configure.in: Check for gai_strerror.
491 2000-10-01 Andreas Schwab <schwab@suse.de>
493 * Makefile.in (install-arch-indep): Update list of installed info
496 2000-09-30 Gerd Moellmann <gerd@gnu.org>
498 * configure.in: Support `sparc*-*-netbsd*'.
500 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
502 * info/dir (MIME): Add entry for emacs-mime.
504 2000-09-29 Dave Love <fx@gnu.org>
506 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
508 2000-09-26 Gerd Moellmann <gerd@gnu.org>
510 * make-dist: Adapt to the change of leim/Makefile which was
511 necessary to ensure a reasonably working `make dist'.
513 * leim-Makefile.in: Moved to leim/Makefile.in..
515 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
517 2000-09-21 Kenichi Handa <handa@etl.go.jp>
519 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
520 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
521 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
523 (${TIT}): Adjusted for the above change.
524 (clean mostlyclean): Likewise.
525 (.el.elc): New target.
527 2000-09-19 Gerd Moellmann <gerd@gnu.org>
529 * make-dist: Include XPM and XBM files in lisp/ and subdirs
532 2000-09-18 Gerd Moellmann <gerd@gnu.org>
534 * make-dist (skk): Rename to `ja-dic' because the leim directory
537 2000-09-14 Dave Love <fx@gnu.org>
539 * configure.in: Fix spurion in last change.
541 2000-09-14 Gerd Moellmann <gerd@gnu.org>
543 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
544 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
545 to `no' if defined. Change result report.
547 2000-09-08 Dave Love <fx@gnu.org>
549 * configure.in: Remove spurious `@'s.
551 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
554 2000-09-06 Gerd Moellmann <gerd@gnu.org>
556 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
557 file and print informational message.
559 * configure.in (AC_FUNC_MMAP): Add.
561 2000-09-01 Gerd Moellmann <gerd@gnu.org>
563 * configure.in: Add ``checking'' messages for
564 XpmReturnAllocPixels.
566 2000-08-28 Gerd Moellmann <gerd@gnu.org>
568 * configure.in: Check <strings.h>; check `index' and `rindex'
571 2000-08-26 Kenichi Handa <handa@etl.go.jp>
573 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
574 "case "${canonical}" in".
576 2000-08-25 Dave Love <fx@gnu.org>
578 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
580 2000-08-25 Kenichi Handa <handa@etl.go.jp>
582 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
584 2000-08-24 Gerd Moellmann <gerd@gnu.org>
586 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
587 contains a relative path. Protect against unusable values of
590 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
592 * info/dir (WoMan): Add entry.
594 * config.bat (maindir): Update src/_gdbinit even if it does
597 2000-08-07 Gerd Moellmann <gerd@gnu.org>
599 * Makefile.in (config.status): Prepend `$(srcdir)/' to
602 2000-08-03 Gerd Moellmann <gerd@gnu.org>
604 * configure.in: Add support for ia64*-*-linux*.
606 2000-07-27 Gerd Moellmann <gerd@gnu.org>
608 * make-dist (aclocal.m4): Include in distribution.
610 2000-07-26 Dave Love <fx@gnu.org>
612 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
614 2000-07-24 Dave Love <fx@gnu.org>
616 * configure.in: Add AC_SIZE_T.
618 2000-07-18 Dave Love <fx@gnu.org>
620 * configure.in: Reorder so that most tests are done after CPPFLAGS
621 is set from the C_SWITCH_... definitions.
623 2000-07-10 Gerd Moellmann <gerd@gnu.org>
625 * configure.in (HAVE_XPM): Undo previous change. Check for
626 preprocessor define XpmReturnAllocPixels.
628 2000-07-06 Gerd Moellmann <gerd@gnu.org>
630 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
631 instead of XpmReadFileToPixmap.
633 2000-07-05 Ken Raeburn <raeburn@gnu.org>
635 * configure.in: Check for <soundcard.h>. Look for ossaudio
636 library, and set LIBSOUND accordingly.
638 2000-07-05 Dave Love <fx@gnu.org>
640 * configure.in: Use AC_HEADER_SYS_WAIT.
642 2000-07-05 Gerd Moellmann <gerd@gnu.org>
644 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
645 lisp/Makefile. Distribute lisp/Makefile.in instead of
648 2000-06-30 Ken Raeburn <raeburn@gnu.org>
650 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
651 while searching for image-handling libraries.
653 2000-06-26 Gerd Moellmann <gerd@gnu.org>
655 * configure.in (--with-xim): New option.
657 2000-06-23 Dave Love <fx@gnu.org>
659 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
660 for struct timezone and test how we can call gettimeofday.
661 Check for OSF 5+. Check for term.h.
663 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
666 2000-06-23 Gerd Moellmann <gerd@gnu.org>
668 * configure.in (HAVE_LIBXP): Change test for libXp.
670 2000-06-21 Dave Love <fx@gnu.org>
672 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
673 simple test for getloadavg and substitute GETLOADAVG_LIBS.
674 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
676 2000-06-19 Dave Love <fx@gnu.org>
678 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
679 _XOPEN_SOURCE is defined.
681 2000-06-16 Gerd Moellmann <gerd@gnu.org>
683 * Makefile.in (distclean): Also make distclean in lisp/.
685 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
687 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
689 2000-06-15 Gerd Moellmann <gerd@gnu.org>
691 * make-dist: Add --help and --snapshot options.
693 2000-06-14 Gerd Moellmann <gerd@gnu.org>
695 * configure.in: Generate lisp/Makefile.
697 * configure.in: Add support for `*-lynxos*'.
698 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
699 recommended by <Karen.Dorhamer@compaq.com> to fix problems
702 2000-06-13 Ken Raeburn <raeburn@gnu.org>
704 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
705 it's on a continuation line.
707 2000-06-02 Dave Love <fx@gnu.org>
709 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
712 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
713 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
716 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
717 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
719 2000-05-26 Gerd Moellmann <gerd@gnu.org>
721 * configure.in: Add check for speed_t typedef.
723 2000-05-25 Ken Raeburn <raeburn@gnu.org>
725 * Makefile.in (install-arch-dep): Install fns-*.el only if it
726 exists; it won't in the CANNOT_DUMP case.
728 2000-05-25 Gerd Moellmann <gerd@gnu.org>
730 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
731 On FreeBSD, the exit status is 1 if CDPATH is not set.
732 (install-arch-indep): Install ebrowse.info.
734 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
736 * configure.in: Check for grandpt and getpt.
738 2000-05-09 Dave Love <fx@gnu.org>
740 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
742 2000-05-05 Gerd Moellmann <gerd@gnu.org>
744 * make-dist: Make a link for lib-src/grep-changelog. Copy
747 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
749 * config.bat: Identify the beginning of the cpp stuff in
750 src/Makefile.in and lib-src/Makefile.in more accurately.
752 2000-04-27 Gerd Moellmann <gerd@gnu.org>
754 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
756 2000-04-19 Gerd Moellmann <gerd@gnu.org>
758 * configure.in: Add support for `powerpc-*-netbsd*'.
760 2000-04-19 Dave Love <fx@gnu.org>
762 * configure.in: Don't use AC_FUNC_GETLOADAVG.
764 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
766 2000-04-16 Dave Love <fx@gnu.org>
768 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
770 2000-04-14 Dave Love <fx@gnu.org>
772 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
774 * aclocal.m4 (AC_FUNC_MKTIME): New.
776 2000-03-28 Ken Raeburn <raeburn@gnu.org>
778 * configure.in: Line up "--help" output a little better.
780 2000-03-26 Gerd Moellmann <gerd@gnu.org>
782 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
784 (bootstrap): Rewritten in terms of the new targets above. Make
787 2000-03-12 Gerd Moellmann <gerd@gnu.org>
789 * config.guess, config.sub: Use the versions of the files from
792 2000-03-08 Dave Love <fx@gnu.org>
794 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
795 AC_C_VOLATILE. Define POINTER_TYPE.
797 * aclocal.m4: New file.
799 2000-03-02 Gerd Moellmann <gerd@gnu.org>
801 * configure.in (machine): Add `mipsel-*-netbsd*' and
804 2000-03-01 Gerd Moellmann <gerd@gnu.org>
806 * configure.in (machine): Add support for `*-auspex-sunos*'.
808 2000-02-29 Gerd Moellmann <gerd@gnu.org>
810 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
812 2000-02-18 Dave Love <fx@gnu.org>
814 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
816 2000-02-18 Andreas Schwab <schwab@suse.de>
818 * Makefile.in (install-arch-indep): Add eudc to list of installed
821 2000-02-17 Ken Raeburn <raeburn@gnu.org>
823 * configure.in: Include -lz and -ljpeg (if it's available) when
824 testing for the tiff library.
826 2000-02-17 Gerd Moellmann <gerd@gnu.org>
828 * configure.in: Remove LISP_FLOAT_TYPE.
830 2000-02-12 Dave Love <fx@gnu.org>
832 * configure.in: Use AC_FUNC_VFORK.
834 2000-02-01 Gerd Moellmann <gerd@gnu.org>
836 * make-dist: Various fixes for new development tree.
838 * leim-Makefile.in: New file.
840 2000-01-31 Gerd Moellmann <gerd@gnu.org>
842 * Makefile.in (dist): Call ./make-dist.
844 2000-01-24 Dave Love <fx@gnu.org>
846 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
848 2000-01-18 Gerd Moellmann <gerd@gnu.org>
850 * configure.in (HAVE_GIF): Check for DGifOpen instead of
853 2000-01-11 Andreas Schwab <schwab@suse.de>
855 * Makefile.in (install-arch-indep): Update list of info files to
858 2000-01-05 Dave Love <fx@gnu.org>
860 * configure.in: Check for jerror.h as well as libjpeg.
862 2000-01-03 Andreas Schwab <schwab@suse.de>
864 * Makefile.in (install-arch-indep): Install autotype*. Run
865 install-info on autotype and emacs-faq.info.
867 1999-12-04 Dave Love <fx@gnu.org>
869 * Makefile.in: (install-arch-indep): Depend on `info'.
870 (install-strip): Use `install' as sub-make target.
872 1999-11-23 Ken Raeburn <raeburn@gnu.org>
874 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
875 didn't need to be deleted. Check for the k5crypto library as well
876 as the crypto library; MIT Kerberos 1.1 changed the name.
878 1999-11-18 Dave Love <fx@gnu.org>
880 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
882 1999-11-11 Erik Naggum <erik@naggum.no>
884 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
886 1999-11-08 Dave Love <fx@gnu.org>
888 * configure.in: Fix change for --with-pop default.
890 1999-11-04 Dave Love <fx@gnu.org>
892 * configure.in: Default to --with-pop. Change sense of with-gcc
893 and with-toolkit-scroll-bars messages to reflect the defaults.
895 1999-11-01 Gerd Moellmann <gerd@gnu.org>
897 * INSTALL: Mention the Emacs Lisp Reference.
899 1999-10-27 Noah Friedman <friedman@splode.com>
901 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
903 1999-10-23 Gerd Moellmann <gerd@gnu.org>
905 * Makefile.in (bootstrap): New target.
907 1999-10-19 Paul Eggert <eggert@twinsun.com>
909 Add support for large files. Merge glibc 2.1.2.
911 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
912 (HAVE_TM_GMTOFF): New symbol.
913 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
915 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
917 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
919 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
920 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
922 1999-10-09 Richard M. Stallman <rms@gnu.org>
924 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
925 Unset CDPATH to prevent cd from generating output.
927 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
929 * update-subdirs: also ignore CVS subdirs.
931 1999-10-07 Gerd Moellmann <gerd@gnu.org>
933 * Makefile.in (install-arch-indep): Add ada-mode.
935 1999-10-06 Dave Love <fx@gnu.org>
937 * Makefile.in: Add rules for config.status, configure.
939 1999-09-07 Gerd Moellmann <gerd@gnu.org>
941 * configure.in (--with-sound): Removed.
943 1999-08-30 Gerd Moellmann <gerd@gnu.org>
945 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
947 (HAVE_TIFF): Add -lm to library check.
949 1999-08-28 Richard Stallman <rms@gnu.org>
951 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
952 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
953 after the other X-related libraries.
955 1999-08-21 Dave Love <fx@gnu.org>
957 * configure.in: Don't check for jpeglib.h.
959 1999-08-20 Gerd Moellmann <gerd@gnu.org>
961 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
962 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
964 1999-08-18 Dave Love <fx@gnu.org>
966 * configure.in: : Check for termcap.h.
968 1999-08-15 Gerd Moellmann <gerd@gnu.org>
970 * configure.in: Add --with-toolkit-scroll-bars. If "no",
971 use Emacs' scroll bars, even if configured for Motif or when
974 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
976 * configure.in: Check for getaddrinfo.
978 1999-08-04 Eli Zaretskii <eliz@gnu.org>
980 * config.bat: Make --no-debug work again by removing -gcoff.
982 1999-07-30 Dave Love <fx@gnu.org>
984 * configure.in: Check for stdlib.h.
986 1999-07-19 Dave Love <fx@gnu.org>
988 * configure.in: Grok sparc64-*-linux-gnu*.
990 1999-07-12 Richard Stallman <rms@gnu.org>
992 * Version 20.4 released.
994 1999-06-23 Karl Heuer <kwzh@gnu.org>
996 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
997 Quote $EMACS, in case it's a program with args.
999 1999-05-29 Richard M. Stallman <rms@gnu.org>
1001 * configure.in: Delete the Kerberos stuff.
1003 1999-05-27 Greg Hudson <ghudson@mit.edu>
1005 * configure.in: Prefer kerberos 5 names.
1007 1999-04-26 Richard M. Stallman <rms@gnu.org>
1009 * configure.in: Check for libXp.
1011 1999-04-08 Richard Stallman <rms@gnu.org>
1013 * make-dist: Include change logs in subdirs of `lisp'.
1015 1999-04-05 Richard Stallman <rms@gnu.org>
1017 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
1018 (install-arch-indep): Make ${datadir}/emacs world-readable.
1020 1999-03-30 Eli Zaretskii <eliz@gnu.org>
1022 * config.bat: Use epaths.* instead of paths.*.
1024 1999-03-07 Eli Zaretskii <eliz@gnu.org>
1026 * INSTALL: Add detailed instructions to unpack and install
1027 intlfonts on MS-DOS.
1029 1999-02-26 Richard Stallman <rms@gnu.org>
1031 * configure.in: Use epaths.h and epaths-force instead of paths....
1033 * Makefile.in (epaths-force): Renamed from paths-force;
1034 operate on epaths.in and produce epaths.h.
1036 1999-02-24 Richard Stallman <rms@gnu.org>
1038 * make-dist: Fix nt/icons directory handling.
1040 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
1042 * configure.in (f301-fujitsu-uxpv4.1): New target.
1044 1999-02-20 Richard Stallman <rms@gnu.org>
1046 * make-dist (tempparent): Fix command to update info files.
1048 1999-02-09 Richard Stallman <rms@gnu.org>
1050 * configure.in (powerpc-apple-netbsd*): New alternative.
1052 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
1054 * make-dist: Include the new directory nt/icons in distributions.
1056 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
1058 * configure.in: Change message about HAVE_XFREE386.
1060 1999-01-07 Eli Zaretskii <eliz@gnu.org>
1062 * config.bat: Support configuring with leim.
1064 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
1066 * configure.in (mips-sgi-irix6.5): New target.
1068 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1070 * configure.in: Remove GSS-API support, since it has been removed
1073 1998-12-04 Markus Rost <rost@delysid.gnu.org>
1075 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
1077 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
1079 * Makefile.in: Don't install customize info file. Run
1080 install-info on viper info file.
1082 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
1084 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
1086 1998-11-16 Kenichi Handa <handa@etl.go.jp>
1088 * configure.in (*-*-bsdi4*): New target.
1090 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
1092 * configure.in: Fix previous change.
1094 1998-11-11 Richard Stallman <rms@gnu.org>
1096 * configure.in (aviion-intel): New machine.
1098 1998-11-04 Kenichi Handa <handa@etl.go.jp>
1100 * configure.in (mips-nec-sysv4*): New target.
1102 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
1104 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
1107 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
1109 * make-dist: Don't include fns*.el in dist.
1111 1998-10-30 Dave Love <fx@gnu.org>
1113 * configure.in: Don't mkdir cpp.
1115 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
1117 * Makefile.in (install-arch-dep): Install src/fns-*.el in
1120 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
1122 * Version 20.3 released.
1124 1998-07-30 Paul Eggert <eggert@twinsun.com>
1126 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
1127 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
1128 (lwlib/Makefile, leim/Makefile):
1129 Prepend $(srcdir)/ to rule dependencies outside this dir.
1131 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1133 * configure.in: Use unset CDPATH instead of making it empty.
1135 1998-06-20 Karl Heuer <kwzh@gnu.org>
1137 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
1139 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
1141 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
1142 and default.el. Sort the results.
1144 1998-05-31 Karl Heuer <kwzh@gnu.org>
1146 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
1149 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
1151 * Makefile.in (install-arch-indep):
1152 Don't alter site-lisp/subdirs.el if it exists.
1154 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
1156 * Makefile.in (install-arch-indep): Put `-' on commands to create
1157 subdirs.el in site-lisp dirs.
1159 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
1161 * Makefile.in (install-arch-indep): Fix typo in previous change.
1163 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
1165 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
1167 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
1169 * Makefile.in (mkdir): Create the site-lisp dirs.
1170 (install-arch-indep): Make site-lisp/subdirs files world-readable.
1172 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
1174 * Makefile.in (INSTALL_INFO): New variable.
1175 (install-arch-indep): Don't replace the dir file if it already exists.
1176 Use the install-info program, via INSTALL_INFO, to add entries.
1177 Make the `info' subdir and the Info files world-readable.
1179 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
1181 * config.bat: Make sure the environment is large enough to support
1182 all the "set foo=bar" commands. Update pointers to DJGPP FTP
1185 1998-04-10 Karl Heuer <kwzh@gnu.org>
1187 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
1189 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1191 * configure.in: Add --with-gssapi to specify GSS-API
1192 authentication support for movemail.
1194 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
1196 * Makefile.in (install-arch-indep): Fix previous change.
1198 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1200 * Makefile.in (info): Run man in build dir, not srcdir.
1202 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
1204 * Makefile.in (install-arch-indep): Fix previous change.
1206 1998-03-23 Kenichi Handa <handa@etl.go.jp>
1208 * Makefile.in (top_distclean): Check the existence of `lock'
1211 1998-03-22 Richard Stallman <rms@gnu.org>
1213 * Makefile.in (install-arch-indep): Put special subdirs.el files
1214 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
1216 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
1218 * make-dist: Fix shell syntax in check for missing .el or .elc files.
1220 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
1222 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1223 (m68*-hp-hpux*): Handle versions 1X like 10.
1225 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
1227 * make-dist: PROBLEMS is now in etc, not top level dir.
1229 * Makefile.in (SOURCES): Delete PROBLEMS.
1231 1998-02-25 Richard Stallman <rms@gnu.org>
1233 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1235 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1237 1998-01-17 Richard Stallman <rms@gnu.org>
1239 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1241 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1243 * make-dist (tempparent): New option --no-check.
1245 * make-dist: Don't do anything with cpp directory.
1247 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1249 * configure.in (sparc-fujitsu-sysv4*): New target.
1251 1997-12-17 Andreas Schwab <schwab@gnu.org>
1253 * configure.in: Cache more tests. Add missing quotes around
1254 message with embedded comma.
1256 1997-12-04 Karl Heuer <kwzh@gnu.org>
1258 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1260 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1262 * make-dist: Changed the comment about `umask 0' to say `Don't
1263 restrict access to any files.'; previously it said `Don't protect
1264 any files', which may have implied that we think fascism is good.
1266 1997-11-24 Paul Eggert <eggert@twinsun.com>
1268 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1269 strftime needs the underlying host's strftime for locale dependent
1272 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1274 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1276 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1278 * config.bat: Configure the man subdirectory.
1280 1997-11-07 Paul Eggert <eggert@twinsun.com>
1282 * configure.in (AC_CHECK_LIB): Add -lintl.
1284 1997-11-07 Karl Heuer <kwzh@gnu.org>
1286 * make-dist (check for .elc files): Avoid bash-specific syntax.
1287 (check for overflow 14-char limit): Simplify.
1289 1997-11-07 Richard Stallman <rms@gnu.org>
1291 * Makefile.in (install): Move blessmail last.
1293 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1295 * configure.in (gettimeofday, one arg or two):
1296 Clarify messages by avoiding double negative.
1298 1997-09-30 Karl Eichwalder <ke@suse.de>
1300 * Makefile.in (install-arch-indep): install the widget info file.
1302 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1304 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1305 libraries in reverse order, so that libraries will appear in the
1306 correct dependency order on the link line (and so that the
1307 configure checks themselves will work properly when early
1308 libraries depend on later ones).
1310 1997-09-21 Erik Naggum <erik@naggum.no>
1312 * make-dist (making links to `src'): Keep timestamp on copied
1315 * make-delta: New script to produce delta distributions.
1317 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1319 * Version 20.2 released.
1321 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1323 * Version 20.1 released.
1325 * Makefile.in (install-leim): Depend on mkdir.
1326 (leim): Depend on src.
1328 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1330 * configure.in: Recognize alpha* instead of just alpha.
1332 1997-09-12 Paul Eggert <eggert@twinsun.com>
1334 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1336 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1338 * update-subdirs: Use rm -f.
1340 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1342 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1343 Ignore subdirs named Old.
1345 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1347 * configure.in: Add OpenBSD clause to set $machine.
1349 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1351 * make-dist: Recompile everything after updating various Lisp files.
1352 Recompile in leim as well as lisp.
1353 Check in leim as well as lisp for mismatched files and too-long names.
1355 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1357 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1359 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1361 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1362 before trying to copy anything from it.
1364 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1366 * Makefile.in (man/Makefile): New target.
1367 (tags): Define env var EMACS and run Makefile from build dir.
1369 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1371 * config.bat: If src/_gdbinit doesn't exist, try using
1372 src/.gdbinit to create it (for building on Windows 95).
1374 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1376 * Makefile.in (install-arch-indep):
1377 Discard extra data in tar | tar pipes.
1379 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1381 * configure.in (x_default_search_path): Corrected
1382 '${x_library}' to '${x_library}/X11'.
1384 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1386 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1388 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1390 * configure.in: Support auto-configuration of both Kerberos V4 and
1391 Kerberos V5 for movemail, including detection of V4 and V5 header
1392 files and libraries.
1394 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1396 * configure.in: Compute x_default_search_path
1397 and substitute into makefiles.
1399 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1401 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1403 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1405 1997-08-07 Erik Naggum <erik@naggum.no>
1407 * configure.in: Remove lockdir, it is no longer needed.
1408 * Makefile.in (mkdir): Don't create lockdir.
1409 (lockdir): Variable deleted.
1410 (paths-force): Don't operate on PATH_LOCK.
1412 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1414 * leim-Makefile.in (clean, distclean): New targets.
1416 * make-dist: Include leim/ChangeLog in leim distribution.
1418 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1420 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1422 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1424 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1426 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1428 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1430 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1432 * make-dist: Update leim/leim-list.el.
1433 Pass along value of $EMACS when updating lisp dir.
1435 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1437 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1438 prerequisite to the use of Doug Lea's malloc.
1440 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1442 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1444 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1446 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1448 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1450 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1452 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1455 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1457 * config.bat: Use `sed' instead of `cp', which might not be
1460 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1462 * Makefile.in (mostlyclean): Add cleaning leim directory.
1463 (clean, distclean, maintainer-clean): Likewise.
1465 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1467 * make-dist (bogosities): Check subdirs of `lisp' also.
1469 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1471 * make-dist (etc): Really avoid symlinks now.
1472 (lisp): Don't delete from subdirs the things we never copy.
1474 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1476 * Makefile.in (install-arch-indep): Correct the target name.
1477 The first letter `i' was dropped by the previous change of mine.
1479 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1481 * configure.in (leim/Makefile): Generate this.
1482 (*-sysv4.2uw*): Recognize new alternative.
1484 * leim-Makefile.in: Renamed from leim-Makefile.
1486 * make-dist: Set up real-leim subdirectory,
1487 with the real contents of leim; then move it to
1488 a separate top-level directory.
1490 * make-dist: Don't mention site-lisp, site-init, site-start
1491 or default, when listing files hat are not compiled and should be.
1493 * configure.in: Create src/config.stamp at the end.
1495 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1497 * Makefile.in (install-leim): Correct previous change.
1499 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1501 * Makefile.in (install-leim): New target.
1502 (install): Depend on install-leim.
1504 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1506 * Makefile.in (SUBDIR): Add leim.
1507 (SUBDIR_MAKEFILES): Add leim/Makefile.
1508 (leim/Makefile): New target.
1510 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1512 * leim-Makefile: New file.
1513 * make-dist: Initialize a `leim' subdirectory with that makefile.
1515 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1517 * configure.in (GNU_MALLOC_reason): Fix message text.
1519 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1521 * make-dist (lisp): Don't process subdirs that start with =.
1522 (etc): Copy symlinks, as in src.
1524 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1526 * configure.in (i*86-*-unixware*): New alternative.
1528 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1530 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1531 and touch it explicitly.
1533 * configure.in (mips-sony-newsos6*): New alternative.
1534 (mips-*-linux-gnu*): New alternative.
1535 (*-*-bsdi*): New alternative.
1536 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1538 1997-06-22 Dave Love <d.love@dl.ac.uk>
1540 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1542 (src/config.h): New target to re-configure if src/config.in
1545 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1547 * configure.in (shutdown): Check for `shutdown' function.
1549 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1551 * update-subdirs: Include the directory "language" in subdirs.
1553 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1555 * configure.in (m88k-dg-dgux4*): New alternative.
1556 (alpha-*-netbsd*): New alternative.
1557 (powerpcle-*-solaris2*): New alternative.
1559 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1561 * make-dist: Warn about .el files that are not compiled.
1563 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1565 * Makefile.in (dist): Don't run update-subdirs here,
1566 since make-dist now gets that done.
1568 * make-dist: Use the new `updates' target in lisp/Makefile.
1570 * make-dist: Use new non-file targets in lisp/Makefile.
1572 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1574 * make-dist: Handle all subdirs of `lisp' uniformly.
1575 Don't handle `term' and `language' specially.
1576 Clear out umask at the beginning.
1578 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1580 * make-dist: Use Make to update finder-inf.el and autoloads.
1581 Also update cus-load.el.
1583 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1585 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1586 in case it is desirable to disable the GNU malloc features with
1589 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1591 * configure.in (DOUG_LEA_MALLOC):
1592 Define if malloc_{get,set}_state exist.
1594 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1596 * make-dist: Make links for files under lisp/language.
1598 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1600 * update-subdirs: Exclude the directory "language" from subdirs.
1602 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1604 * configure.in: Check for rint and cbrt.
1606 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1608 * make-dist: Use $EMACS to say where to run Emacs.
1609 Add --no-update option.
1611 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1613 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1615 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1617 * make-dist (copying src): Check thoroughly for symlinks
1618 and copy them in all cases. Regularize the linking of *.in
1619 and *.opt and ChangeLog files.
1620 (copying lib-src): Likewise.
1621 Don't rm getdate.c or y.tab.*--they don't exist any more.
1623 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1625 * configure.in: Check for libmail, maillock.h and
1626 touchlock (for movemail).
1628 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1630 * configure.in (limits.h): Check for this file.
1632 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1634 * configure.in (rs6000-ibm-aix4.2): New alternative.
1635 (rs6000-ibm-aix4.0): New alternative.
1636 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1638 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1640 * configure.in: Recognize vax-*-netbsd*.
1642 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1644 * configure.in (locallisppath): Add leim directory.
1646 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1648 * config.bat: Make sure `mv' supports forward slashes and -f.
1650 1996-10-28 Christian Limpach <chris@nice.ch>
1652 * configure.in (hppa*-next-nextstep*): * added after hppa
1653 to accept hppa1.0 and hppa1.1.
1655 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1657 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1658 * configure.in (ld_switch_machine): Fix typo.
1660 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1662 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1663 from config.h and use them in $ac_link.
1665 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1667 * configure.in: Create a subdir named `lisp'.
1669 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1671 * configure.in: Check for getcwd.
1673 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1675 * configure.in: Check for termios.h. Check for setpgid.
1677 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1679 * configure.in: Check for setrlimit.
1681 1996-08-31 Paul Eggert <eggert@twinsun.com>
1683 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1685 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1687 * configure.in: Check for utimes.
1689 * configure.in: Check for com_err library, but only
1690 if --with-kerberos was used. Check for krb and des
1691 only if --with-kerberos.
1693 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1695 * Makefile.in (INSTALL_STRIP): New variable.
1696 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1697 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1699 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1701 * configure.in: Check for krb and des libraries.
1703 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1705 * configure.in (*-sunos4.1.[3-9]*noshare):
1706 Use sunos413, not sunos4-1-3.
1707 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1708 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1710 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1712 * Makefile.in (src/paths.h): Target deleted.
1713 (paths-force): Delete all dependencies on this target
1714 but don't delete the target.
1715 (install): Depend on `all'.
1716 (paths-force): Don't print a message.
1718 * configure.in: Generate src/paths.h here.
1720 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1722 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1723 New variables that affect linking only.
1724 (alpha-dec-osf*): Use those instead of previous change.
1726 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1728 * Makefile.in (install-arch-indep): Install info/messages.
1730 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1732 * Version 19.33 released.
1734 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1736 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1737 Fix previous change.
1739 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1741 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1744 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1746 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1747 and NON_GCC_TEST_OPTIONS.
1749 1996-08-06 Paul Eggert <eggert@twinsun.com>
1751 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1752 "TZ=..." in environ.
1754 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1756 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1758 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1760 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1761 the more general *-sunos4.1.[3-9]* clause.
1763 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1765 * Version 19.32 released.
1767 * configure.in (*-sco3.2v5*):
1768 Set OVERRIDE_CPPFLAG to a string of one space.
1769 Fix the code that uses OVERRIDE_CPPFLAG.
1771 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1773 * configure.in: Undo previous change.
1775 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1777 * config.sub: Use `pc', not `unknown', when canonicalizing
1778 the vendor for ...86.
1780 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1782 * configure.in: Check for termios.h header.
1784 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1786 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1788 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1790 * configure.in: Split bsdos2 and bsdos2-1.
1792 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1794 * config.sub: If last two words are not a recognized
1795 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1796 Make conversion of gnu/linux to linux-gnu really work.
1798 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1800 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1802 * configure.in (check for using Lucid widgets by default):
1803 Eliminate indentation that confuses some compilers.
1805 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1807 * config.sub: Convert linux and gnu/linux to linux-gnu.
1809 * make-dist: Don't update getdate.c.
1810 Ignore =... files when checking for too-long Lisp file names.
1812 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1814 * configure.in (euidaccess): Check for that, not for eaccess.
1816 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1818 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1820 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1822 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1824 * configure.in: Rename lignux to linux-gnu in configuration names.
1825 Use gnu-linux as the opsys value (s/ file name).
1826 Allow i686 just like i386, i486, i586.
1828 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1830 * configure.in (i*86-*-sco3.2v5): New alternative.
1831 (OVERRIDE_CPPFLAG): New variable.
1832 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1834 * configure.in: Specify vpath for .texi files.
1836 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1838 * configure.in: Always check for HAVE_X11R5.
1839 Separately decide whether to use a toolkit by default.
1841 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1843 * configure.in: If X11R5 is missing the Xaw headers,
1844 default to --with-x-toolkit=no.
1846 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1848 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1850 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1852 * Makefile.in (install-arch-indep): If cd etc makes output,
1853 don't treat that as part of the tar data.
1854 Check that ./lisp actually exists.
1856 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1858 * make-dist: Check for long file names.
1860 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1862 * Version 19.31 released.
1864 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1866 * configure.in: Recognize sparc-*-lignux.
1868 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1870 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1871 Don't include config.w95.
1873 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1875 * make-dist: Replace --no-clean-up and --no-tar options
1876 with --clean-up and --tar, so that the default is useful.
1878 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1880 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1881 if not, tell the user to rename it and abort.
1883 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1885 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1888 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1890 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1892 * make-dist (MANIFEST): Fix previous change.
1893 (msdos): Put mainmake.v2 into the dist.
1895 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1897 * make-dist: Exit if autoconf fails.
1899 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1901 * config.bat: Set djgpp-ver, and unset it at the end.
1902 Add a number of conditionals for DJGPP version 2.
1903 Rename label libsrc2 to libsrc3.
1904 Substitute for LDFLAGS in src/Makefile.
1905 Substitute for ALL_CFLAGS in lib-src/Makefile.
1907 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1909 * configure.in (ncurses): Check this after checking fns like strerror.
1911 1996-04-08 Erik Naggum <erik@naggum.no>
1913 * make-dist (MANIFEST): Don't include lines from =files.
1915 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1917 * make-dist: Don't put lisp/dired.todo in the dist.
1919 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1921 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1923 * configure.in (setlocale): Check for it.
1925 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1927 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1929 * configure.in: Use lignux instead of linux as value of opsys.
1931 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1933 * Makefile.in (install-strip): Fix whitespace.
1934 Get rid of continuation.
1936 * config.sub: Convert linux or gnu/linux to lignux.
1938 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1940 * configure.in: Accept lignux in configuration name.
1942 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1944 * Makefile.in (install-strip): New target.
1946 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1948 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1949 -f failed to do the job on Suns.
1951 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1953 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1955 * configure.in (linux/version.h): Check for this header.
1957 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1959 * configure.in: Remove -fno-builtin hackery from -lm check.
1961 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1963 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1966 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1968 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1970 * configure.in: Check for ncurses.
1972 1996-02-28 Paul Eggert <eggert@twinsun.com>
1974 * configure.in (LOCALTIME_CACHE):
1975 Also define if localtime mishandles unsetting TZ.
1976 This works around a localtime bug in mips-dec-ultrix.
1978 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1980 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1982 * configure.in: Improve messages about X versions.
1984 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1986 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1988 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1990 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1991 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1993 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1994 (install): Put install-arch-indep before install-arch-dep.
1996 1996-02-20 Dave Love <d.love@dl.ac.uk>
1998 * INSTALL: Clarify info about MS-DOS path handling.
2000 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2002 * Makefile.in (install-arch-indep): Install info/ccmode*.
2003 In previous change, protect against /bin/pwd returning null string.
2005 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2007 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
2010 1996-02-01 Paul Eggert <eggert@twinsun.com>
2012 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
2014 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2016 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
2018 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2020 * Makefile.in (extraclean): Use ${top_distclean} to ensure
2021 we delete everything distclean deletes.
2023 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
2025 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
2027 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2029 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
2030 into LDFLAGS instead of into LIBS.
2032 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2034 * configure.in (HAVE_XMU): Fix typo in previous change.
2036 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2038 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
2040 1996-01-10 Erik Naggum <erik@naggum.no>
2042 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
2044 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
2046 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
2048 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2050 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
2051 and use -lXt to link it.
2053 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2055 * configure.in (locallisppath): Put version-specific dir first.
2057 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2059 * configure.in (hppa-*-nextstep*): New alternative.
2060 (USE_X_TOOLKIT): By default, set this to "maybe";
2061 and change that later to LUCID or "no" according to X11 version.
2063 * make-dist: Recompile outdated .elc files and update all autoloads.
2065 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2067 * configure.in (locallisppath): Fix typo in last change: " -> '.
2069 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2071 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
2073 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2075 * Makefile.in (install-arch-indep): Give all files read permission.
2077 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2079 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
2080 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
2082 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2084 * configure.in: Determine HAVE_X11R6.
2085 (HAVE_MENUS): Renamed from HAVE_X_MENU.
2087 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2089 * configure.in: Just "solaris" now defaults to version 2.4.
2090 Add sunos4.1.n-noshare as alternative.
2092 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2094 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
2096 1995-11-29 Erik Naggum <erik@naggum.no>
2098 * Makefile.in (install-arch-indep): Add missing backslash.
2100 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
2102 * Makefile.in (install-arch-indep): Don't install
2103 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
2105 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2107 * Makefile.in (install-arch-indep): Fix previous change.
2109 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
2111 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2113 * Version 19.30 released.
2115 * make-dist (lisp): Exclude subdirs.el.
2117 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2119 * make-dist (etc): Delete *.orig and *.rej.
2121 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2123 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
2125 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2127 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
2129 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
2131 * make-dist (nt): Rename install, readme, and todo to
2132 INSTALL, README, and TODO.
2134 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2136 * make-dist (lisp): Don't distribute site-start.
2138 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
2140 * make-dist: Break the hard link on alloca.c.
2142 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2144 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
2146 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2148 * make-dist (src, lib-src): Don't distribute Makefile.c.
2149 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
2151 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2153 * Makefile.in (mkdir): Create man1dir, not mandir.
2154 (uninstall): Use man1dir, not mandir.
2156 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2158 * Makefile.in (man1dir): New variable.
2159 (install-arch-indep): Use man1dir.
2161 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
2163 * make-dist: Create lisp/MANIFEST.
2165 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2167 * configure.in (m68k-*-linux*): New alternative.
2169 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2171 * make-dist: Use new names config.in, paths.in, and
2172 {src,lib-src}/Makefile.in.
2174 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2176 * configure.in: Don't bother checking for drem.
2178 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2180 * Makefile.in (distclean): Delete line with just a tab in it.
2181 (install-arch-indep): Delete spaces that precede tabs.
2182 Delete spurious `fi' left from previous change.
2183 (install): Supply `true' as command, to avoid null command.
2185 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2187 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
2189 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2191 * configure.in (powerpc-*-solaris2): New alternative.x
2193 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
2195 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
2196 of paths.h.tmp$$, to avoid going beyond 14 characters.
2198 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2200 * configure.in: Improve error msg for invalid --with-x-toolkit value.
2202 1995-09-06 Paul Eggert <eggert@twinsun.com>
2204 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
2205 if localtime caches TZ. Check for tzset.
2207 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2209 * config.bat: Simplify using new names file names src/makefile.in,
2210 config.in, paths.in. Change Echo commands not to use `.
2212 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2214 * Makefile.in (install-arch-indep): Always install the new dir file;
2215 rename the previous dir file to dir.bak or dir.old.
2217 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2219 * configure.in (RANLIB): Substitute this into makefiles.
2220 Set it specially on solaris; set it by default on other systems.
2222 * configure.in: Fix previous Alpha change.
2224 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2226 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2227 NON_GCC_TEST_OPTIONS.
2229 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2231 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2232 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2234 * configure.in (alpha-*-linux*): New configuration.
2236 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2238 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2239 (m68k-next-nextstep*): New alias for that.
2240 (i*86-*-nextstep*): Use nextstep.h.
2241 (sparc-*-nextstep*): New configuration.
2243 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2245 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2246 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2248 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2250 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2251 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2253 1995-07-18 Mike Long <mike.long@analog.com>
2255 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2257 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2259 * Makefile.in (src/paths.h, paths-force):
2260 Rename src/paths.h.in to src/paths.in.
2261 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2263 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2264 Use Makefile.c for intermediate file.
2265 Rename src/config.h.in to src/config.in.
2267 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2269 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2270 (mips-dec-ultrix4.[12]): New alternative for old versions.
2272 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2274 * make-dist: Don't break intra-tree links.
2276 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2278 * configure.in: Put back archlibdir initialization. Require
2279 autoconf 2.4.1 or later.
2281 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2283 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2284 (mips-mips-riscos5*): New alternative.
2286 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2288 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2290 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2292 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2293 (mandir, infodir, archlibdir): Initializations deleted.
2295 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2296 On hpux9shr, use hpux9shxr4.h.
2298 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2300 * configure.in: Added target mips-dec-mach_bsd4.3.
2301 * config.guess: Guess mips-dec-mach_bsd4.3.
2303 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2305 * Makefile.in (mkdir): Use symbolic chmod.
2307 1995-06-22 Paul Eggert <eggert@twinsun.com>
2309 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2310 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2312 1995-06-22 Paul Eggert <eggert@twinsun.com>
2314 * Makefile.in (SUBDIR_MAKEFILES):
2315 Add man/Makefile, so `make distclean' removes it.
2316 (top_distclean): Add config.log to the list of files to be removed.
2318 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2320 * Version 19.29 released.
2322 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2324 * configure.in: Fix the previous change to verify that the -b
2325 option really solves the problem.
2327 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2329 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2331 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2333 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2335 * configure.in: Report more clearly when there is no special
2336 dir to search for X includes or libraries.
2338 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2340 * configure.in: Check for -lpthreads, not -lpthread.
2342 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2344 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2346 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2348 * configure.in: Check for -lpthread.
2350 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2352 * Makefile.in (install-arch-indep): Install info files for mh-e.
2353 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2355 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2357 * configure.in (*-solaris2.5): New configuration.
2359 * make-dist: Copy new files config.nt and config.w95.
2361 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2363 * configure.in: Use x_includes, not x_libraries, for -I.
2364 Make bitmapdir a colon-separated list.
2366 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2368 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2370 * configure.in: Allow x_libraries and x_includes to be paths.
2372 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2374 * configure.in: Fix typo.
2376 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2378 * INSTALL: Clarify use of site-init.el.
2380 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2382 * configure.in: pass arg to sqrt.
2384 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2386 * make-dist: Fix May 6 change.
2388 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2390 * vpath.sed: Delete reference to ymakefile.
2392 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2394 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2397 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2399 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2401 * update-subdirs: Specify /bin/sh to run the script.
2403 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2405 * make-dist: Put src/makefile.nt in dist.
2407 * configure.in (i[345]86-*-bsdi2*): New configuration.
2408 (vax-dec-bsd386*): Deleted.
2410 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2412 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2413 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2414 instead of logb in -lm check.
2416 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2418 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2419 Use bsd4-3. Don't set NON_GNU_CPP.
2421 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2422 In nt. copy various different things, but not *.cmd.
2423 Fix the ln commands for the subdirs of nt.
2425 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2427 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2429 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2431 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2432 since that's what the header file expects.
2434 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2436 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2437 and 68040 based machines when choosing options for gnucc.
2439 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2441 * Makefile.in (top_distclean): Delete config.cache.
2443 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2445 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2447 * configure.in: Use m/ncr386.h.
2449 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2451 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2453 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2455 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2456 (man): Don't copy texindex.c and getopt.c; they're deleted.
2457 (etc): Omit `e'; it's a subdirectory.
2458 (etc/e): Use `../..', not `..', to reference top level.
2460 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2462 * Makefile.in (install-arch-indep, dist):
2463 look for `update-subdir' in $(srcdir).
2465 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2467 * make-dist: Include mkinstalldirs in distribution.
2469 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2471 * make-dist: Add missing close backquote.
2473 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2475 * make-dist: Don't distribute shortnames directory.
2477 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2479 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2481 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2483 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2485 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2487 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2489 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2491 * configure.in (mips-sgi-irix6): New configuration.
2493 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2495 * Makefile.in (maintainer-clean): Renamed from realclean.
2497 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2499 * configure.in: Create a .gdbinit that sources the real one, if
2500 using a different build directory.
2502 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2504 * configure.in: Check for sys/select.h.
2506 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2508 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2510 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2512 * configure.in: Handle isc 4.1 operating system.
2514 1994-12-10 Richard Stallman <rms@kepa>
2516 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2517 (rs6000-ibm-aix4*): New alternative.
2519 1994-12-06 Richard Stallman <rms@kepa>
2521 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2523 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2525 * configure.in: Don't try to make directories that are guaranteed
2528 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2530 * configure.in: Generate man/Makefile from man/Makefile.in.
2531 Create the man subdir.
2533 * Makefile.in (dvi): Run Make in our man subdir.
2535 * make-dist: Create subdir etc/e.
2537 Put man/Makefile.in in dist, instead of man/Makefile.
2539 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2541 * configure.in: Add --with-pop, --with-kerberos, and
2542 --with-hesiod for movemail.
2544 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2546 * configure.in (m68*-apollo*): Use s/domain.h.
2548 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2550 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2552 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2554 * configure.in: Don't add -I, -L, -R options for cc if their
2555 arguments would be empty.
2557 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2559 * configure.in (i860-intel-osf1*): New alternative.
2560 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2561 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2563 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2565 * configure.in: Make h_errno check not use nested functions.
2567 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2569 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2571 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2573 * Makefile.in (install-arch-indep): Avoid continued comment
2574 swallowing target line.
2576 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2578 * configure.in: Protect a character class with `changequote'.
2580 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2582 * configure.in: Accept `news' as a synonym for `newsos'.
2584 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2586 * Makefile.in: Don't rm files if cd fails.
2588 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2590 * make-dist: Put nt subdir and its subdirs in the dist.
2591 (lib-src): Put makefile.nt in the dist.
2592 (lisp): Put makefile.nt in the dist.
2594 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2596 * configure.in: Change a stray `[' to `test'.
2598 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2600 * configure.in: Adapt for Autoconf v2. Use the standard argument
2601 parser, host type canonicalizer, X11 finder, and message
2602 printing macros. Use the new macro names. Use `test' instead of `['.
2604 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2606 * configure.in: Check for getpagesize.
2608 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2610 * make-dist (msdos): Put sed* in the distribution.
2612 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2614 * config.bat: New option, `--with-x', for configuring Emacs
2615 for use with the X11 system DesqView/X.
2616 New option, `--no-debug', for compiling Emacs without debug
2617 information thus saving disk space.
2618 (src/config.h, src/paths.h): Use `update' (which is like
2619 `move-if-changed') to change the file.
2620 (src/config.h): When configuring for X11 perform extra changes.
2621 (src/makefile): When configuring for X11 perform extra changes.
2622 (lib-src): Remove temporary files.
2623 (): Check that `sed', `rm', `mv', and `gcc' are available.
2625 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2627 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2629 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2631 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2633 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2635 * configure.in (canonical): Substitute var into makefiles.
2636 (bitmapdir): Likewise.
2638 * Makefile.in (bitmapdir): New variable.
2639 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2641 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2643 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2645 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2646 * update-subdirs: New shell script.
2648 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2650 * Makefile.in (top_distclean): Don't rm build-install.
2651 (SOURCES): Delete build-install.in.
2653 * make-dist: Don't distribute build-ins.in.
2654 * build-ins.in: File deleted.
2656 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2658 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2660 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2662 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2664 * configure.in (libexecdir): Renamed from libdir. New default.
2665 (sharedstatedir): Renamed from statedir. New default.
2666 (datadir): New default.
2668 * make-dist: Don't distribute subdirs.el.
2670 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2672 * configure.in (eaccess): Check for it.
2674 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2676 * configure.in (mktime): Check for it.
2678 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2680 * configure.in (motif): Add support for usage and option checking.
2682 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2684 * configure.in (utimes): Check for it.
2686 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2688 * Makefile.in (install-arch-indep): Don't do mkdir here.
2690 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2692 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2693 riscix.h renamed to acorn.h.
2695 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2697 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2700 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2702 * configure.in: Remove trailing slashes from srcdir.
2704 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2706 * configure.in (i[345]86-sequent-ptx*): Handle
2708 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2710 * Makefile.in (paths-force): Depend on src/paths.h
2712 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2714 * configure.in (config_options): Save all arguments, not just some.
2716 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2718 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2720 * configure.in: Add AC_AIX.
2721 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2723 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2725 * configure.in (parsing options): Simplify sed command to delete -'s.
2727 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2729 * configure.in (config_options): New shell variable.
2730 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2732 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2734 * configure.in (alpha-dec-osf*): New target.
2736 * Makefile.in: Use just one FRC target.
2738 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2740 * Makefile.in (removenullpaths, paths-force):
2741 Use name paths.h.tmp$$, which depends on the pid.
2743 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2745 * Makefile.in (removenullpaths, paths-force):
2746 Put paths.h.tmp in top-level dir, not in src.
2748 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2750 * Version 19.27 released.
2752 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2754 * Version 19.26 released.
2756 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2758 * configure.in: Check for lrand48, not rand48.
2760 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2762 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2763 (powerpc-ibm-aix*): New aliases.
2765 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2767 * make-dist (src/m, src/s): Put *.inp in distribution.
2769 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2771 * configure.in: Accept i586 and i486 along with i386.
2773 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2775 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2776 even if CPP env var was set by the user.
2778 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2780 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2782 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2784 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2786 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2788 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2790 * configure.in: Check more specifically for i*86-sun-sunos.
2792 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2794 * configure.in: Handle solaris 2.4.
2796 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2798 * configure.in (rand48): Check for it.
2800 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2802 * make-dist: Update the info files.
2804 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2806 * configure.in: Make "checking..." messages' style consistent.
2807 (HAVE_H_ERRNO): New test.
2809 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2811 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2813 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2815 * configure.in (CFLAGS): If the envvar was specified, use that.
2816 And set REAL_CFLAGS from it too.
2818 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2820 * make-dist: Update finder-inf.el.
2822 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2824 * make-dist (msdos): Include sed4.inp in dist.
2826 * Makefile.in (libsrc_libs): Var deleted.
2828 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2830 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2832 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2834 * configure.in (mips-sony-newsos4*): New alias.
2836 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2838 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2839 (*-convex-convexos*): Accept this as alias.
2841 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2843 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2844 for two different uses.
2846 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2848 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2850 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2852 * make-dist: Put ./BUGS into the distrib.
2854 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2856 * configure.in: Handle 386 running Solaris 2.
2858 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2860 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2862 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2864 * configure.in (mips-sony-newsos*): Use news-risc.h.
2866 * configure.in: Accept bsdi as opsys, like bsd386.
2868 1994-06-01 Morten Welinder (terra@diku.dk)
2870 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2872 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2874 * Version 19.25 released.
2876 * make-dist (shortversion): Don't assume another period follows.
2878 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2880 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2881 (uninstall): Use /bin/pwd.
2883 * Makefile.in (blessmail): Depend on src.
2884 (all): Don't depend on blessmail.
2886 * Makefile.in (src/paths.h): Don't force recomputation.
2887 (paths-force): New target; force recomputation of paths.h.
2888 (all): Depend on paths-force.
2889 (src, lib-src): Depend on src/paths.h.
2891 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2892 NON_GCC_TEST_OPTIONS.
2894 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2896 * configure.in: Don't insist on subversions for irix.
2898 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2900 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2902 * configure.in (i[34]86-next-*): New alternative.
2904 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2906 * Version 19.24 released.
2908 * configure.in: New config hppa*-hp-hpux9shr*.
2910 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2912 * config.bat: Doc fix.
2914 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2916 * Makefile.in (mostlyclean, clean, distclean, realclean)
2917 (extraclean): Don't act on man subdir if it doesn't exist.
2919 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2921 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2922 Use them to set up CC.
2923 (*-sun-sunos4.1.3): Set them.
2925 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2927 * Makefile.in (lib-src): Don't depend on src/paths.h.
2929 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2931 * build-ins.in (copydests): Get rid of spurious `-'s.
2933 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2935 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2937 * Version 19.23 released.
2939 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2940 for the Xlib and Xt checks; then restore old CFLAGS.
2942 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2944 * configure.in (HAVE_X11XTR6): Add newline before #if.
2945 Add newline after #endif.
2947 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2949 * configure.in (HAVE_X11XTR6): Arrange to define it.
2951 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2953 * Makefile.in (install): Depend on blessmail.
2955 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2957 * configure.in (mips-siemens-sysv*): Put quotes around value
2960 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2962 * Makefile.in (TAGS): Use the makefile in src subdir.
2964 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2966 * configure.in (opsys): Recognize `gnu'.
2968 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2970 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2972 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2974 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2977 1994-05-08 Morten Welinder (terra@diku.dk)
2979 * config.bat: Forcibly remove "# " style comments from makefiles.
2981 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2983 * Makefile.in (uninstall): When processing lispdir and etcdir,
2984 do nothing unless it exists and is a directory.
2986 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2988 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2989 Merge code in from install-doc.
2990 (install-doc): Merge code back into install-arch-indep.
2991 (install-arch-dep): Don't depend on install-doc.
2993 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2995 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2997 * configure.in (making src/Makefile and lib-src/Makefile):
2998 Split off the autoconf substitutions and don't pass them thru cpp.
2999 (undefs): Use $canonical as well as $configuration.
3001 * make-dist: Distribute lisp/Makefile.
3003 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
3004 Use lower case names for the s files.
3006 1994-05-03 Morten Welinder (terra@diku.dk)
3008 * config.bat: Added possibility for different file name
3009 transscriptions in lib-src.
3011 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3013 * Makefile.in (lib-src): Undo previous change.
3014 (blessmail): New target to run maybe-blessmail in lib-src.
3015 (all): Depend on blessmail.
3017 * Makefile.in (lib-src): Depend on src.
3019 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
3021 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
3022 (m88k-dg-dgux5.4R2): dgux5.4R2.
3024 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3026 * configure.in (window_system): Restore accidentally deleted code
3027 that uses AC_FIND_X.
3029 * make-dist: Distribute config.bat.
3031 1994-04-29 Morten Welinder (terra@diku.dk)
3033 * config.bat: Corrected the configuration of lib-src
3034 to keep up with configure. Add note about dos version 3
3035 or better needed (djgpp needs that). Add note explaining
3036 that either install in c:/emacs or edit the script.
3037 Don't change to c:/emacs, but assume we're there (to minimize
3038 the number of places to change).
3040 * config.bat: Build-in the first step towards X11 support with
3041 the X11 emulator that exists. At this time it won't work,
3042 and several files are missing.
3044 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3046 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
3047 Don't look for -lresolv.
3049 * Makefile.in (lib-src): Depend on src/paths.h.
3051 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3053 * configure.in: Restore deleted AC_SUBST of `configuration'.
3054 Improve error message for bad --with-x-toolkit value.
3056 * configure.in: Define CONFIGURATION in src/config.h
3057 rather than substituting in src/Makefile.in.
3059 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3061 * Makefile.in (install-doc): New target.
3062 (install-arch-dep): Depend on install-doc.
3063 (mkdir): Create docdir.
3065 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3067 * configure.in: Test for libresolv.a.
3068 Substitute machfile and opsysfile.
3070 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3072 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
3073 (install-arch-dep): Install under the name $(EMACS).
3075 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3077 * configure.in (version): Use entire value of emacs-version.
3078 (mips-siemens-sysv*): New alternative.
3080 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3082 * Makefile.in (install-arch-indep): Don't install dired-x*.
3084 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3086 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
3087 Fix definition of $undefs.
3089 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3091 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
3093 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
3095 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
3097 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
3099 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3101 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
3102 and run it thru cpp, as with src/Makefile.in.
3104 * configure.in: Use AC_SET_MAKE.
3106 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3108 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
3110 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3112 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
3114 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
3115 (printing the choices): Make the toolkit message unconditional.
3116 (USE_X_TOOLKIT): Use `none', not `no', if none.
3117 (include libsrc_libs): Include config.h, and specify -I for srcdir.
3118 Get rid of temp file foofoo1.
3120 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3122 * configure.in (CFLAGS): Use shell syntax, not Makefile.
3124 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3126 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
3127 (printing the choices): State choice of toolkit.
3128 (libsrc_libs): Recalculate after writing config.h;
3129 then update lib-src/Makefile.
3131 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3133 * configure.in: Add sunos4shr as alternative for suns.
3134 Conditionals testing for null $CC were backwards.
3136 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3138 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
3140 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3142 * configure.in: Handle -isc4.0*.
3144 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3146 * configure.in (esix5): Set NON_GNU_CPP.
3148 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
3150 * Makefile.in (thisdir): Nonsensical variable removed.
3151 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
3152 back to $thisdir, rather than the directory `this_dir'.
3154 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3156 * Makefile.in (install-arch-indep): Add missing backslash after a
3159 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3161 * Makefile.in (thisdir): New variable.
3162 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
3164 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3166 * configure.in: Add freebsd.
3168 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3170 * configure.in: Check for fpathconf.
3172 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3174 * configure.in (with_x_toolkit): Fix typo in previous change.
3176 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3178 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
3180 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3182 * configure.in (with_x_toolkit): Don't allow motif or open-look.
3184 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3186 * configure.in: Fix value of docdir.
3187 * Makefile.in (install-arch-indep): Install DOC* in docdir.
3189 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3191 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
3193 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
3195 * configure.in: New variable docdir to control where the docstring
3197 Makefile.in: Use it to initialize PATH_DOC in paths.h.
3199 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3201 * configure.in: When --run-in-place, don't inherit archlibdir.
3203 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3205 * Makefile.in (install-arch-dep, install-arch-indep):
3206 New targets split up former do-install rule.
3207 (do-install): Target deleted.
3209 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3211 * configure.in (mips-sony-newsos*): New configuration.
3213 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
3215 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
3217 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3219 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3221 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3223 * configure.in: Don't initialize CC.
3225 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3227 * configure.in (creating src/Makefile): Also generate -U switches
3228 for symbols in the $configuration value.
3230 * configure.in: Check for sys_siglist being declared in system header.
3232 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3234 * configure.in (creating src/Makefile): Delete blank lines
3235 along with lines of whitespace.
3236 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3238 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3240 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3241 like C_SWITCH_SYSTEM.
3242 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3244 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3246 * configure.in (drem): Check for this function.
3248 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3250 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3251 If CPP was inherited from environment, don't use NON_GNU_CPP.
3252 (NON_GNU_CC): Likewise.
3253 (handling with_gcc): Use explicit if in the `no' case.
3254 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3256 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3258 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3260 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3262 * configure.in: Check whether fmod exists.
3264 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3266 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3267 {src,lisp}/OChangeLog.
3269 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3271 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3272 necessary for proper operation. This code works with the current
3273 released version of Autoconf.
3275 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3277 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3278 (USE_X_TOOLKIT): Define it for all values except `no'.
3280 * configure.in: Undo first Jan 8 change and Jan 16 change.
3282 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3284 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3285 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3287 * Makefile.in (lwlib/Makefile): New target.
3288 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3289 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3290 (unlock, relock): Handle lwlib subdir.
3292 * Makefile.in: Add some .PHONY targets.
3294 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3296 * lwlib: New subdirectory.
3298 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3300 * configure.in: If CPP has a value that is a directory,
3303 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3305 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3308 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3310 * Makefile.in (do-install): Install the dired-x info files.
3312 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3315 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3317 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3319 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3321 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3322 AC_OUTPUT as it should be; hopefully noone will again see fit to
3323 gratuitously break this and not make a change log entry.
3324 Optimized sed processing of Makefile.in and cpp output; now
3325 preserves comments previously removed from the cpp input.
3326 Eliminated temp file for cpp output. Generate -U switches to
3327 undefine all identifiers that appear in the directory name
3328 ${srcdir}; pass these to cpp.
3330 * configure.in (version): Fix sed regexp to match two-elt version
3333 * configure.in: Check for strerror.
3335 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3337 * configure.in: Test for bcmp.
3339 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3341 * make-dist (tempdir): Put subdir msdos into the distribution.
3343 1993-01-07 Morten Welinder (terra@diku.dk)
3345 * config.bat: New file.
3347 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3349 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3351 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3353 * configure.in (m68*-next-*): Don't care about which os is specified.
3354 (i[34]86-*-*): Check for *-nextstop*.
3356 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3358 * configure.in: Check for setsid.
3360 1993-12-17 Richard Stallman (rms@srarc2)
3362 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3364 1993-12-15 Richard Stallman (rms@srarc2)
3366 * Makefile.in (mkdir): Make only the lockdir writable.
3368 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3370 1993-12-11 Richard Stallman (rms@srarc2)
3372 * Makefile.in (libdir): Use @libdir@.
3374 1993-12-08 Richard Stallman (rms@srarc2)
3376 * Makefile.in (install): Add empty command.
3378 1993-12-04 Richard Stallman (rms@srarc2)
3380 * make-dist: Put man/getopt.c in the dist.
3382 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3384 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3386 1993-12-03 Richard Stallman (rms@srarc2)
3388 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3389 Set it for all solaris versions.
3390 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3391 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3392 Likewise for NON_GNU_CC and CC.
3394 1993-12-01 Richard Stallman (rms@srarc2)
3396 * configure.in (mips-mips-riscos4*): Assign variable CC.
3397 (checking ${with_gcc}): If "no", don't override CC if already set.
3398 (CC): Initialize it as empty.
3400 1993-11-30 Richard Stallman (rms@srarc2)
3402 * configure.in (Suns): Set CPP if *-solaris2.3*.
3404 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3406 * Version 19.22 released.
3408 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3410 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3412 * make-dist: When breaking links, use cp -p.
3413 Copy install.sh into distribution.
3414 Move the temp dir up into the parent dir;
3415 don't leave the staging dir make-dist.tmp... in existence.
3416 * install.sh: New file.
3418 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3420 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3422 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3424 * configure.in (version): When --run-in-place, exclude
3425 ${datadir}/emacs/site-lisp from locallisppath.
3427 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3429 * configure.in: Delete jumk.c before writing it.
3431 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3433 * Version 19.21 released.
3435 * Makefile.in (mkdir): Ignore error from chmod.
3437 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3439 * make-dist: Don't put lisp/forms.README in the distribution.
3441 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3443 * configure.in (creating src/Makefile): Before running cpp,
3444 discard all lines that start with `# Generated' or /**/#.
3446 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3448 * Version 19.20 released.
3450 * make-dist: Use build-ins.in, not build-install.in.
3451 Don't bother updating TAGS since it's not included.
3453 * build-ins.in: Renamed from build-install.in.
3455 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3457 * make-dist: Don't try to link *.texinfo--there are none now.
3458 When running make in lib-src, specify YACC var value.
3460 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3462 * configure.in (extrasub): Add vpath patterns for %.[yls].
3464 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3465 Instead just include the commands to make src/Makefile as the
3466 second arg to AC_OUTPUT.
3468 * configure.in: Use : instead of dnl for comment inside
3471 * configure.in: No longer use vpath_sed. Instead, when we notice
3472 srcdir already configured, set extrasub to hack vpath in the
3475 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3477 * Makefile.in (VPATH): Define to @srcdir@.
3479 1993-09-28 Brian Fox (bfox@cubit)
3481 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3482 doesn't exist. Just copy src/Makefile.in instead. Touch
3483 all of the Makefiles after editing config.status.
3485 * INSTALL: Update documentation to match new configuration
3488 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3490 * configure.in: Allow any of the path or directory Makefile
3491 variables to be set with flags to configure. Create all Makefiles
3492 at configure time. Edit special commands into config.status after
3493 src/Makefile.in is built from src/Makefile.
3495 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3496 If these files are out of date, simply have config.status
3497 rebuild them; don't rebuild them explicitly.
3499 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3501 * build-install.in: Change src/xemacs to src/emacs. We no longer
3502 create src/xemacs, so the file wouldn't be found.
3504 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3506 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3508 * configure.in: Avoid forcing the search of /usr/include before
3509 fixed include files by resetting C_SWITCH_X_SITE if it is
3512 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3514 * Makefile.in (@rip_paths@locallisppath):
3515 Delete ${datadir}/emacs/site-lisp.
3517 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3520 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3521 Remove ${extra_output} from AC_OUTPUT call.
3523 1993-09-17 Brian Fox (bfox@inferno)
3525 * make-dist: Quote backquotes found in strings to be echoed.
3527 * configure.in: Use "sh -c pwd" when we want to avoid having the
3528 shell fix up the value of $PWD.
3530 1993-09-13 Brian Fox (bfox@inferno)
3532 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3533 of the installation fail. Suggested by Karl Berry.
3535 1993-08-30 Brian Fox (bfox@inferno)
3537 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3538 was used. Set MAKEFLAGS from MFLAGS.
3540 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3542 * configure.in: Test for res_init in libc.
3544 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3546 * configure.in: In the file ${tempcname}, use configure___
3547 instead of @configure@.
3549 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3551 * make-dist: Dist vpath.sed
3553 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3554 Depend on vpath.sed.
3555 Replace sed comand for VPATH with @vpath_sed@.
3557 * configure.in: Substitute variable `vpath_sed'.
3558 If not in $srcdir and $srcdir is configured,
3559 issue warning that GNU make is required,
3560 and set vpath_sed to use vpath.sed script.
3562 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3564 * configure.in: Remove check for $srcdir being configured. This
3565 pretty much works now.
3566 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3567 Check for XFree86 (/usr/X386/include) independent of whether
3570 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3571 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3574 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3576 * Version 19.19 released.
3578 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3580 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3582 * configure.in: Check for XScreenNumberOfScreen.
3584 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3586 * configure.in: Add * to end of all configuration alternatives.
3587 (m68*-sony-newsos3*): New alternative.
3589 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3591 * make-dist: Include getdate.c in distribution.
3593 * configure.in: For --help, use $PAGER if it is set.
3594 (LIB_X11_LIB): Default to -lX11.
3595 (mips-sgi-irix5.*): New alternative.
3597 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3599 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3600 Recognize *.B8.* as hpux version 8.
3601 (m68*-tektronix-bsd*): Fix typo in tek4300.
3602 (AC_HAVE_FUNCS): Add ftime.
3604 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3606 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3607 Use tekxd88, not tekXD88.
3609 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3611 * configure.in: Check for -lm. Then can check for frexp and logb.
3613 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3615 * Version 19.18 released.
3617 * make-dist (src): Don't put gnu-hp300 in dist.
3618 (src, lisp): Include OChangeLog in dist.
3620 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3622 * configure.in: Test for presence of logb and frexp functions.
3624 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3626 * configure.in (machine): Add i370-ibm-aix*.
3628 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3630 * configure.in (function checks): Test for mkdir and rmdir.
3632 * configure.in (function checks): Don't test for random and bcopy
3633 only when we're building with X; look for them all the time.
3635 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3637 * configure.in: Test for availability of bcopy functions, searching
3638 the X libraries if we're using X.
3640 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3641 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3642 versions of AIX, and needs to be passed to the loader.
3644 * configure.in: Test for the availablility of the
3645 XScreenResourceString function.
3647 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3649 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3650 LD_SWITCH_X_SITE and assume --with-x11.
3651 Only look for X11 files if we weren't told about a window system
3652 or if we were told to use X11 but not told where.
3653 Search the libraries from the s and/or m files when checking for
3656 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3658 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3660 * make-dist: Include lisp/dired.todo in the distribution.
3662 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3664 * configure.in: Add code to set HAVE_INET_SOCKETS.
3666 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3668 * configure.in: If we do find x_includes and x_libraries
3669 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3671 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3673 * make-dist: Include src/gnu-hp300 in the dist.
3675 * configure.in (canonical): New variable holds the canonicalized
3676 configuration. Don't alter `configuration'. Use `configuration'
3677 for Makefile.in for file naming.
3678 (testing x_includes and x_libraries): Use =, not ==.
3680 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3682 * Version 19.17 released.
3684 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3685 directory's makefile. This allows the invocation of CPP which
3686 builds xmakefile to receive these switches. The SunSoft C
3687 preprocessor inserts spaces between tokens if it doesn't get the
3688 -Xs flag requested in src/s/sol2.h.
3690 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3692 * configure.in (m68k-bull-sysv3): new config.
3694 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3696 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3697 the X Windows libraries.
3699 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3701 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3702 the distribution. Those files aren't kept in their own
3703 subdirectory any more.
3705 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3707 * Version 19.16 released.
3709 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3711 * configure.in: Add --verbose flag.
3713 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3715 * version 19.15 released.
3717 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3719 * Makefile.in (top_distclean): Use -f switch when cleaning out
3720 lock dir; it might be empty.
3722 * configure.in: Only check for -lXbsd once.
3724 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3726 * Version 19.14 released.
3728 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3730 * make-dist: If using gzip, create distribution with '.gz' extension.
3732 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3733 (lisp/forms-mode): This doesn't exist anymore.
3735 * configure.in: Look for the closedir function.
3737 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3739 * configure.in (CPP): Autoconf sets this to a shell variable
3740 reference, which doesn't work when it's edited into a makefile.
3741 Expand that variable reference.
3743 * Makefile.in (CPP): New variable.
3744 (src/Makefile): Edit CPP into src/Makefile.
3746 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3747 and entering double quotes to get the values of LD_SWITCH_X_SITE
3748 and the other make variables; make substitutes them in anyway.
3750 * Makefile.in (uninstall): Don't remove the lisp and etc
3751 directories if they're in the source tree.
3753 Bring mumbleclean targets into conformance with GNU coding standards.
3754 * Makefile.in (mostlyclean, clean): Separate these two; just have
3755 them pass the request to the subdirectory makefiles.
3756 (distclean): Pass the request down, and then get rid of the
3757 files configure built, and get rid of the Makefiles.
3758 (realclean): Pass the request down, and then do the same things
3760 (uninstall, info, dvi): New targets.
3762 * configure.in: Move clause for PC-compatible i386 box to the end
3763 of the case statement, to avoid masking configurations below.
3765 * configure.in: Add case for m88k-motorola-sysv4.
3767 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3768 the HP 68000 machines.
3770 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3771 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3772 preprocessor won't fiddle with them.
3774 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3776 * Makefile.in (TAGS): cd to src to run etags.
3778 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3780 * configure.in (version): Check the X libraries for XrmSetDatabase
3781 and random, and see if we have -lXbsd.
3783 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3785 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3786 s/*.h and m/*.h files. Martin Tomes
3787 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3789 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3791 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3792 above the general i386 alternative.
3794 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3796 * configure.in: Recognize configuration name for Data General
3799 * configure.in: Use AC_LONG_FILE_NAMES.
3801 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3803 * configure.in: Test for bison.
3804 * Makefile.in (YACC): New variable.
3805 (lib-src/Makefile.in): Edit YACC into the makefile.
3807 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3809 * Version 19.13 released.
3811 * configure.in (CFLAGS): Don't set this according to the value of
3812 the GCC shell variable. Instead, consult the machine and system
3813 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3814 test __GNUC__ while we're at it.
3816 * configure.in: Remove extra ;; from hpux cases.
3818 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3820 * configure.in: Check to see if the system has -ldnet.
3822 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3824 * make-dist: Add clauses to distribute lisp/forms-mode.
3826 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3828 * configure.in (machine): Fix the versions in hpux version number test.
3829 Do not guess based on cpu type. Do check for explicit system version.
3831 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3833 * configure.in: Do NOT look for `unknown' as company name.
3835 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3837 * configure.in: Fix typo in message.
3839 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3841 * Version 19.12 released.
3843 * Makefile.in (do-install): Correct previous etc-copying change.
3844 Partially rewrite using `if'.
3845 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3847 * Version 19.11 released.
3849 * configure.in: Handle 386bsd.
3851 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3853 * make-dist: Update getdate.c.
3855 * configure.in: Handle bsd386.
3857 * Makefile.in (do-install): Use `-' in tar options.
3859 * configure.in: Change ! "${...}" to x"${...}" = x.
3861 * Makefile.in (do-install): Copy the DOC-* files from the build
3862 etc directory, as well as lots of things from ${srcdir}/etc.
3864 * make-dist: Copy config.guess.
3866 * configure.in: Handle AIX versions 1.2, 1.3.
3868 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3870 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3871 the configuration name mips-mips-usg* to represent USG systems.
3873 * configure.in: Fix logic to detect if srcdir is already configured.
3875 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3877 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3878 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3879 of a directory; cd might fail, and have pwd print out the current
3882 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3884 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3886 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3888 * configure.in: Complain if srcdir points at an already-configured
3891 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3893 * Version 19.10 released.
3895 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3897 * Makefile.in: Use Makefile comments, not C comments.
3899 * configure.in: Add case for the Tektronix XD88.
3901 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3903 * configure.in: Handle sysv4.2 and sysvr4.2.
3905 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3907 * configure.in: Traverse the argument list without destroying it;
3908 don't use shift. It turns out that "set - ${saved_arguments}"
3909 doesn't work portably.
3911 * configure.in: Add missing "fi".
3913 * make-dist: Rebuild configure if configure.in is newer.
3915 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3916 targets to be executed even if make remembers that it has already
3919 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3921 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3923 * configure.in (romp): Handle various version numbers with aos and bsd.
3925 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3927 * configure.in: Fix message text.
3929 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3931 * make-dist: Make a `site-lisp' directory in the distribution,
3932 instead of a `local-lisp' directory, which hasn't been the
3933 appropriate name for a long time.
3934 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3935 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3937 * Makefile.in (do-install): Correctly detect if ./etc and
3938 ${srcdir}/etc are the same.
3940 * configure.in: Extract UNEXEC from the system configuration
3941 files, compute the name of the source file corresponding to the
3942 object file, and #define it as UNEXEC_SRC in config.h.
3944 * configure.in: If srcdir is '.', then try using PWD to make it
3947 * configure.in: Include ${srcdir} in the printed report, to help
3948 people notice if it's an automounter path.
3950 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3952 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3954 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3956 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3957 when they are different. Add `shift' command.
3958 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3959 (externallispdir): Var deleted.
3961 * configure.in: Delete spurious paren outputting short_usage.
3963 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3965 * Version 19.9 released.
3967 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3969 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3972 * make-dist: Check for .elc files with no corresponding .el file.
3974 * Makefile.in (mkdir): Make all the directories in locallisppath.
3976 * config.guess: New file.
3977 * configure.in: Use it, tentatively.
3978 * INSTNALL: Mention its usage.
3980 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3981 the former gives you the operating system rev directly. Use
3982 s/hpux.h if we don't recognize what we got.
3984 * Makefile.in (do-install): Don't remove a destination directory
3985 if it's the same as the source. If ${srcdir}/info == ${infodir},
3986 don't try to copy the info files.
3988 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3989 doesn't work if you're not using a separate source directory.
3990 (do-install): Copy the build tree's etc directory only after
3991 making sure it's not also the source tree's etc directory.
3993 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3995 * configure.in: Handle sunos4.1.3 specially.
3997 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3999 * Makefile.in (INSTALL): Add definition.
4001 * configure.in: Fix some messages. Support -with-gnu-cc.
4002 At the end, use `set --', not `set -'.
4003 Delete spurious `.h' in hpux alternatives.
4005 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4007 * Version 19.8 released.
4009 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4011 * configure.in: When looking for source in the same directory as
4012 the configure script, make the path thus discovered absolute.
4013 If the user specifies the `--srcdir' switch, make that directory
4016 * Makefile.in (srcdir): Remove comment saying this doesn't work.
4018 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
4019 too, as the value of the PATH_INFO macro.
4021 * configure.in: Check to see if the source lives in the same
4022 directory as the configure script.
4024 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4026 * Makefile.in (install): Split this into `install' and
4027 `do-install', to give people more control over exactly what gets
4029 (do-install): New target, containing the guts of `install'. Don't
4030 remove and recreate the directories inside the copying loop - do
4031 it all before the copying loop. Pass more flags to the lib-src
4033 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
4034 avoid errors and warnings.
4036 * configure.in: For generic IBM PC boxes, insist on "unknown" for
4037 the manufacturer - the more general case was blocking other i386
4038 configuration names below, and that's how the names are written in
4041 * make-dist: When breaking links, remove the link before moving
4042 the copy onto it, to avoid interactive behavior.
4044 * Makefile.in: Doc fix.
4046 * configure.in: Doc fix.
4048 * INSTALL: Mention --exec-prefix option.
4050 * configure.in: Add support for the `--exec-prefix' option.
4051 * Makefile.in: Accept that support.
4053 * configure.in: Use the AC_PROG_INSTALL macro.
4054 * Makefile.in (INSTALL): Variable removed.
4055 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
4057 * configure.in: Distinguish between hp800's and hp700's by calling
4060 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4062 * configure.in: Recognize configuration names for i860 boxes
4065 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4067 * configure.in: Distinguish between hp800's and hp700's by the
4068 version of HP/UX they run, since that's something people are more
4069 likely to know - hp700's run 8.0.
4070 Add HP 700 configuration.
4072 * configure.in: Test for the presence of the `rename' function.
4074 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
4076 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
4078 * make-dist: Break intra-tree links.
4080 * configure.in: Explain that this is an autoconf script, and give
4081 instructions for rebuilding configure from it. Arrange to put
4082 comments in configure explaining this too.
4084 * configure.in: Make the first line of the configure script be
4085 "#!/bin/sh". Leaving the first line blank didn't work.
4087 * configure.in (long_usage): Removed; made short_usage describe
4088 the options briefly.
4090 * configure.in: Implement the --prefix option.
4091 * Makefile.in (prefix): Add support for it here.
4092 * INSTALL: Document it here.
4094 * Makefile.in (install): Don't assume that the files in the `info'
4095 subdirectory match *.info. They don't have that prefix.
4097 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4099 * configure.in: Add case for version 5 of Esix.
4101 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4103 * Version 19.7 released.
4105 * make-dist: There aren't any *.com files in lib-src anymore.
4107 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
4108 them; they're symlinks to other filesystems on the GNU machines.
4110 * make-dist: Check that the manual reflects the same version of
4111 Emacs as stated in lisp/version.el. Edit that version number into
4114 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4116 * configure.in: Remove the hack of AC_DEFINE; use
4119 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4121 * make-dist: Don't distribute precomp.com, compile.com, or
4122 link.com from ./src; they're in ./vms now.
4124 Some time-handling patches from Paul Eggert:
4125 * configure.in: Add AC_TIMEZONE.
4127 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4129 * configure.in: Recognize Linux as a valid operating system for
4132 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4134 * make-dist: Distribute some VMS files we got from Richard Levitte.
4136 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
4137 the source for the sed command, not oldXMenu/Makefile.
4139 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4141 * INSTALL: Don't claim the srcdir option doesn't work.
4143 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4145 * configure.in: Include remarks saying what order the autoconf
4146 tests should go in, and remind people to change config.h.in
4147 whenever they add autoconf tests which make #definitions.
4149 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
4151 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4153 * Makefile.in (oldXMenu/Makefile): Make this depend on
4154 ${srcdir}/oldXMenu/Makefile.in, not itself.
4156 * PROBLEMS: Some updates from David J. Mackenzie.
4158 More changes from David J. Mackenzie.
4159 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
4160 removed; autoconf and config.h should specify all these
4162 (buildlisppath): Make this path depend on ${srcdir}.
4163 (INSTALLFLAGS): Removed.
4164 (INSTALL): Include the -c flag.
4165 (install): Change the way we invoke install accordingly.
4167 Install ${srcdir} changes from DJM.
4168 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
4170 (COPYDIR, COPYDESTS): Install files from both the etc directory in
4171 the source tree and the etc directory in the object tree.
4172 (${SUBDIR}): Pass the prefix variable down to submakes.
4173 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
4175 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
4176 values for srcdir and VPATH.
4177 (install): Add `v' flag to tar command. Make sure that `dir'
4178 exists in ${srcdir}/info before copying it. Remember that the man
4179 pages come from the source tree, not the object tree.
4180 * configure.in: Remove remarks saying that the --srcdir option
4182 Create the etc directory in the object tree.
4183 Recognize configuration names of the form *-sun-solaris*.
4184 Recognize sunos5 and solaris as operating system names.
4186 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
4187 lib-src/getdate.y and src/systime.h.
4189 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4191 * make-dist: Make links in info subdir.
4193 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4195 * configure.in: Call AC_STDC_HEADERS.
4197 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4199 * configure.in: Sidestep autoconf's quoting of the second argument
4200 of AC_DEFINE, so we can specify the value to put there. It would
4201 be nice if autoconf provided some way to specify computed values
4204 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4206 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
4207 this is always just -DHAVE_CONFIG_H.
4209 The GNU coding standards specify that CFLAGS should be left for
4211 * Makefile.in (CFLAGS): Let configure determine the default value
4213 have it default to DEFS.
4214 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
4215 (lib-src/Makefile, src/Makefile): Edit the default value for
4216 CFLAGS into these files, not DEFS.
4217 * configure.in (CFLAGS): Choose a default value for this - "-g"
4218 normally, or "-g -O" if we're using GCC. Edit it into the
4221 * configure.in: When scanning the machine and system description
4222 #include files, write their names to conftest.c properly.
4224 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4226 * configure.in: In configuration name case for Apallos running
4227 Domainios, set opsys, not opsysfile.
4229 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4230 src/config.h, instead of AC_OUTPUT; the latter overwrites
4231 src/config.h even when it hasn't changed, puts a makefile-style
4232 comment at the top even though it's C code, and produces a
4233 config.status script which doesn't do the job right.
4235 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4236 can use a symbolic link to get the X Menu library into src.
4237 * Makefile.in (LN_S): New variable.
4238 (src/Makefile): Edit the value of LN_S into this makefile.
4240 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4242 * configure.in: Support *-sco3.2v4* as opsystem.
4244 * make-dist: Don't include calc directory.
4245 Exclude many files in the man directory; copy a few.
4247 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4249 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4250 call AC_STRUCT_TM to see what's in time.h.
4252 * configure.in: Employ quoting stupidity to get the value of CPP
4255 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4257 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4258 variable to scan the machine and system description files.
4260 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4261 so that getdate.y builds correctly.
4263 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4265 * configure.in (tempcname): Change this to "conftest.c", so it will
4266 work properly on systems with short filenames; this is the name
4269 * configure.in: Also detect the availability of dup2 and
4272 * configure.in: Use the AC_ALLOCA test.
4273 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4274 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4276 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4278 * make-dist: Distribute configure, as well as configure.in.
4281 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4283 * Makefile.in (install): Print out the name of the directory we're
4284 copying, so people can have some idea of whether we're making
4287 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4288 Don't forget to re-create the COPYDESTS directories after we clear
4291 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4293 * Makefile.in: Add autoconf cookies so that the configure
4294 script can comment out sections of path variable definitions to
4295 choose between the installable configuration and the run-in-place
4297 * configure.in: Add new option `--run-in-place', to select the
4298 run-in-place path definitions.
4300 * configure.in: Add a clause to the big configuration name case
4301 for the NeXT machine.
4303 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4305 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4306 Make sure that each source directory exists, and is different from
4307 the destination directory; then, delete the destination before
4308 copying over the source.
4310 * make-dist: Distribute configure.in, instead of configure.
4312 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4314 * configure.in: Don't set CC to "gcc -O" if the user specifies
4315 `--with-gcc'. Add -O to DEFS if GCC is set.
4317 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4319 * Makefile.in (clean mostlyclean): Missing right paren.
4321 * configure.in: When checking for X windows, search for an X11
4322 subdirectory of ${x_includes}.
4324 * configure.in: Check for gettimeofday function, for getdate.y.
4326 Change `configure' to a mixture of custom code and autoconf stuff.
4327 autoconf can't derive all the information we need, but we'd really
4328 like to be able to take advantage of some of its tests, and its
4329 file-editing facilities.
4330 * configure.in: Renamed from configure.
4331 Quote the sections of shell script we want copied literally to
4332 the configure script.
4333 (compile): Initialize this to make the autoconf macros' code happy.
4334 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4335 code to do their jobs.
4336 Use autoconf to produce Makefile and src/config.h.
4337 Remove the Makefile-style comment that autoconf places at the top
4339 (config_h_opts): Removed - no longer necessary.
4340 * Makefile.in (configname): Renamed to configuration.
4341 (CONFIG_CFLAGS): Renamed to DEFS.
4342 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4343 get values via autoload @cookies@.
4344 (libsrc_libs): Get this from autoconf. We used to do nothing
4346 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4348 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4349 echo the move-if-change command.
4351 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4353 * make-dist: Distribute lib-src/rcs-checkin.
4355 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4356 Don't try to make links to the RCS or Old subdirectories.
4357 Use the appropriate extension for the compression type in use.
4358 Create the tar file in the shell's initial default directory, not
4360 Erase the whole ${tempparent} tree, not just ${tempdir}.
4362 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4364 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4365 use to build paths.h.
4366 (lib-src/Makefile, src/Makefile): Similarly.
4368 * configure: Extend test for working `const' keyword to handle AIX
4371 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4373 * make-dist: Distribute lisp/term/ChangeLog.
4375 Arrange for C compilation throughout the tree to get
4376 C_SWITCH_SYSTEM from the configuration files.
4377 * configure: Extract C_SWITCH_SYSTEM from the machine and
4378 system-dependent files, and save it in the top-level Makefile.
4379 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4380 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4382 * make-dist: Include the VMS support files in oldXMenu in the
4385 * configure: Doc fix.
4387 * configure: Fix corrupted config_h_opts.
4389 * configure: Properly report option names in error messages.
4391 * configure: Properly recognize --x-includes and --x-libraries
4394 * configure: Fix syntax errors in code handling XFree386.
4396 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4398 * configure: Add special code to detect XFree386, and tell
4401 * configure: Properly handle extracting values of LIBS_MACHINE and
4402 LIBS_SYSTEM that contain spaces.
4404 * configure: Add `--x-includes' and `--x-libraries' options. I
4405 think these are dopey, but no less than three alpha testers, at
4406 large sites, have said they have their X files installed in odd
4407 places. Implement them by setting C_SWITCH_X_SITE and
4408 LD_SWITCH_X_SITE in src/config.h.
4410 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4412 * make-dist: Don't distribute etc/Old files.
4414 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4417 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4419 * make-dist: Fix typo.
4421 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4423 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4424 in some cases where it should but didn't seen to.
4426 * Makefile.in: Added unlock and relock productions.
4428 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4430 * make-dist: Add a --compress option to force make-dist to use
4433 * make-dist: Use gzip, if we can find it.
4435 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4436 make rs6000-ibm-aix default to -aix32.
4438 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4440 * Makefile.in: Added `Developer's configuration' section.
4442 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4444 * Makefile.in: Add commented-out variable settings for developer's
4447 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4449 * make-dist: Distribute `src/bitmaps' too.
4451 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4453 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4454 make rs6000-ibm-aix default to -aix32.
4456 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4458 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4460 * Makefile.in (install.sysv): Add a second `$' in front of
4461 `${dest}', so that the shell will expand it, instead of Make.
4463 * configure: When processing the name of the configure script,
4464 collapse `././' to `./', but leave a single `./' prefix alone.
4466 * configure: Doc fix.
4468 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4470 * configure: Handle isc3.0 correctly.
4472 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4474 * make-dist: Don't try to copy the COPYING notice into
4475 external-lisp; we're not distributing that directory any more.
4477 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4479 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4480 Remove CVS subdirectories from the installed directory trees, as
4481 well as RCS directories.
4483 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4485 * make-dist: Only copy gmalloc.c if we couldn't link it.
4486 Don't try to copy man/{README,Makefile} unless they actually exist.
4488 * Makefile.in (lisppath): Don't include externallispdir in this.
4489 We're not sure whether we're even going to distribute the
4492 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4494 * make-dist: Don't distribute the external-lisp directory anymore.
4495 * INSTALL: Remove all references to external-lisp.
4497 * configure: Detect whether the compiler supports `const'
4498 properly, and edit src/config.h accordingly.
4500 * configure: Tweak layout of final report.
4502 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4505 * Makefile.in (locallisppath): Make this default to
4506 ${datadir}/emacs/site-lisp, instead of
4507 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4508 the same thing, and local-lisp causes completion conflicts with
4510 (lisppath): Add ${externallispdir} to this.
4511 * INSTALL: Adjust installation directions.
4513 * Makefile.in (externallispdir): New variable, to say where to
4514 install the externally-maintained lisp files.
4515 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4517 * INSTALL: Describe external-lisp and the new externallispdir
4520 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4522 * configure (progname): New option `--with-gcc'. Make it clearer
4523 how we are trying to guess whether or not we have GCC.
4524 * INSTALL: Document the `--with-gcc' option, and improve
4525 description of `--with-x' options.
4527 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4529 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4530 ${infodir} from these variables; we have written out explicit code
4531 to install the info files.
4533 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4535 * make-dist: Don't distributed the RCS files in the etc directory.
4537 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4539 * Makefile.in: Some makes can't handle comments in the middle of
4540 commands; move them to before the whole rule.
4542 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4544 * README: Mention what Emacs is.
4546 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4548 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4549 Add `./cpp' and `./man' back into the distribution.
4551 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4553 * Makefile.in: Define MAKE, and use where appropriate.
4555 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4557 * make-dist: Remember that the authoritative COPYING notice is
4558 `etc/COPYING', not `../etc/COPYING'.
4560 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4562 * make-dist: Make sure that the COPYING notices in each directory
4563 are copies, not symlinks.
4565 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4567 * INSTALL: The build process produces an executable called `emacs'
4568 now. Change references.
4569 * Makefile.in: Adjust `install.mumble' targets to install
4570 `src/emacs', not `src/xemacs'.
4572 * configure: Start with a blank line; this keeps some old CSH's
4573 from thinking it's a CSH script. Most systems will just use
4574 /bin/sh to run it, which is what we're expecting; the only other
4575 shells which might try to interpret it themselves are probably
4578 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4580 * INSTALL: Improvements suggested by David Mackenzie.
4582 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4584 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4585 Don't try to copy the info files if there aren't any; the
4586 unexpanded globbing pattern disappoints `install'. Ignore the
4587 return status of that command.
4589 * INSTALL: Updated for new configuration arrangement.
4591 * configure: Don't make the top-level Makefile read-only - people
4592 may want to edit the values of the path variables.
4594 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4595 Install the info files in ${infodir}. Install the executable
4596 under both `emacs' and `emacs-VERSION'.
4598 * Makefile.in: Doc fix.
4600 * Makefile.in (exec_prefix): New variable, as per latest version
4601 of coding standards.
4602 (bindir, libdir): Use it, instead of `prefix'.
4603 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4605 * Makefile.in (mandir): Make the default value for this depend on
4608 * Makefile.in (datadir, statedir, libdir): Make these all default
4610 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4613 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4614 Install the etags and ctags man pages too.
4616 * Makefile.in (distclean): Don't delete backup files; that's the
4618 (extraclean): Like distclean, but deletes backup and autosave files.
4620 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4622 Make path specification conform to GNU coding standards.
4623 * configure (long_usage): Remove all traces of old arguments from
4624 usage messages, and document the options we do accept in more
4625 detail: -with-x... and --srcdir.
4626 (options, boolean_opts): Deleted; we don't have enough options to
4627 make this worthwhile.
4628 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4629 along with the code which supported them; these should be set as
4630 arguments to the top-level make.
4631 (config_h_opts): Since this no longer doubles as a list of option
4632 names, make them upper case; this simplifies the code which uses
4633 them to build the sed command to edit src/config.h. Change the
4634 code which sets them.
4635 (cc, g, O): Don't allow the user to set these using options; they
4636 should be specified using `CC=' and `CFLAGS=' arguments to the
4637 top-level make. Just choose reasonable default values for them,
4638 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4640 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4641 options; use them whenever the configuration files say they're
4643 Simplify the argument processing loop. Don't accept abbreviations
4644 for option names; these might conflict with other configuration
4645 options in the future.
4646 Add some support for the `--srcdir' option. Check for the sources
4647 in . and .. if `--srcdir' is omitted. If the directories we will
4648 compile in don't exist yet, create them under the current directory.
4649 Note that the rest of the build process doesn't really support
4651 Edit only the top Makefile. That should edit the others. Edit
4652 into the makefile: `version', from lisp/version.el, `configname'
4653 and `srcdir' from the configuration arguments, `CC' and
4654 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4655 the user's path, and LOADLIBES as gleaned from the system
4657 Simplify the report generated; it doesn't need to include any
4658 description of paths now.
4659 Make `config.status' exec configure instead of just calling it, so
4660 there's no harm in overwriting `config.status'.
4661 * Makefile.in (version, configname): New variables, used to choose
4662 the default values for datadir and libdir.
4663 Path variables rearranged into two clearer groups:
4664 - In the first group are the variables specified by the GNU coding
4665 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4666 manext, infodir, and srcdir).
4667 - In the second are the variables actually used for Emacs's paths
4668 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4669 archlibdir), which depend on the first category.
4670 datadir and libdir default to directories under
4671 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4673 etcdir and lispdir default to subdirectories of datadir.
4674 archlibdir defaults to libdir.
4675 The new installation tree is a bit deeper than it used to be, so
4676 use the new make-path program in lib-src to build them all.
4677 Always build a new src/paths.h.tmp and then move-if-change it to
4678 src/paths.h, to avoid unnecessary rebuilds while responding to the
4680 Remove all mention of arch-lib. Run utility commands from
4681 lib-src, and let the executables be copied into archlibdir when
4683 Add targets for src/Makefile, lib-src/Makefile, and
4684 oldXMenu/Makefile, editing the values of the path variables into
4686 Let lib-src do its own installation.
4687 (datadir): Default to putting data files under
4688 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4689 (emacsdir): Variable deleted; it would only be confusing to use.
4690 (lispdir, etcdir): Default to ${datadir}/lisp.
4691 (mkdir): Use make-path for this.
4692 (lockdir): Do this in mkdir.
4693 (Makefile): New target.
4695 * configure (usage_message): Rename to long_usage.
4697 * make-dist: Don't bother creating an arch-lib directory; that's
4698 only for installation now.
4700 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4702 * configure: Use GCC-style configuration names, using config.sub.
4703 Change the usage and help messages.
4705 * configure: Initialize window_system, not indow_system.
4707 * configure: Report which window system, compiler, and signal
4708 handler return type we decide to use.
4710 * make-dist: Explain what's going on if config.sub and gmalloc.c
4711 can't be linked. Place the code which copies them near the code
4712 which links the rest of the files around them.
4714 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4716 * make-dist: Don't bother to distribute src/*.com, or
4717 src/vmsbuild; those have all been moved to `../vms'.
4719 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4721 * make-dist: Don't forget that the way to avoid filenames starting
4722 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4723 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4724 couldn't make hard links to, since we have two already, and
4725 perhaps more to come.
4727 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4729 * configure: When editing parameters into lib-src/Makefile, change
4730 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4731 needs some other flags too.
4733 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4735 * configure: Remove spurious echo of the configuration name.
4737 * make-dist: Don't distribute files in src/m and src/s whose names
4740 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4742 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4743 Also LISP_FLOAT_TYPE.
4745 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4747 * make-dist: Copy config.sub, since it's a symbolic link to a file
4748 on another file system.
4750 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4752 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4755 * config.sub: New file, to help us recognize configuration names.
4756 * make-dist: Include it in the distribution.
4758 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4760 * configure: Convert `-' to `_' in specified option names.
4761 Accept options with --. Delete --highpri and --have-x-menu options.
4762 New options --with-x and --with-x10 replace -window-system.
4763 Don't mention options --gnu-malloc, --rel-alloc
4764 or --lisp-float-type in help message.
4766 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4768 * make-dist: Include the `vms' subdirectory in the distribution.
4770 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4772 * configure: Remove lines starting with "# DIST: " when building
4773 lib-src/Makefile and src/Makefile. This allows us to mark the
4774 "Makefile.in" files with explanatory comments which won't also get
4775 stuck in the Makefiles.
4777 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4779 * make-dist: Don't use the '+' operator in the sed regular
4780 expression that extracts the version number from lisp/version.el;
4781 Ultrix sed doesn't seem support the operator. Just double the
4784 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4786 * Makefile.in: Doc fix.
4788 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4790 * configure: Rewrite sed command to remove at most one ./ prefix;
4791 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4794 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4796 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4798 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4800 * make-dist: Go ahead and build a new TAGS file, unless the
4801 --newer option was specified. Don't try to delete a TAGS file
4802 from etc; it's not kept there, and shouldn't be deleted anyway.
4804 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4806 * make-dist: If the lisp directory contains a default.el, don't
4809 * configure: When searching signal.h for the type of a signal
4810 return handler, make a copy of it, not a symbolic link to it; that
4811 way, it will work on systems that don't have symbolic links.
4813 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4815 * make-dist: taught it about vcdiff and rcs2log, added --newer
4816 option for generating incremental distributions. Stopped it from
4817 generating a TAGS file into the distribution; that sucker is
4818 *big*, and easily enough generated with the toplevel makefile.
4820 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4822 * configure: When writing config.status, don't prefix progname
4823 with a '.'; it might be absolute.
4825 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4827 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4828 /usr/include/X11 exist, not only if both exist.
4830 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4832 * make-dist: Make the new external-lisp directory a duplicate of
4833 the external-lisp directory, not the lisp directory.
4835 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4837 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4838 clean' in arch-lib; it doesn't even have a Makefile.
4840 * Makefile.in (clean, mostlyclean): In the test which tries to
4841 distinguish between the build directory, which should be cleaned,
4842 and the installed directory, which shouldn't, cd to `${emacsdir}',
4843 not `${DESTDIR}${LIBDIR}'.
4845 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4847 * make-dist: Be sure to delete the .c and .h files that YACC and
4848 BISON create from getdate.y.
4850 * external-lisp: New directory; see `external-lisp/README'.
4851 * make-dist: Added support for the external-lisp subdirectory.
4853 * make-dist: Changed message which complains that make-dist wasn't
4854 invoked in the right directory to indicate which files it was
4857 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4859 * configure: Add comments explaining why we can't translate
4860 character ranges or control characters in `tr'.
4862 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4864 * configure: When generating the configuration message, we used to
4865 build the message from the start so that each line began with "# "
4866 so that it would be a comment in `config.status'. However, this
4867 causes trouble if any of the variables we use in the message
4868 expand to more than one line of text - as gnu_malloc_reason
4869 sometimes does. So instead, we build the message as it should be
4870 printed to the user (i.e. without the "# " prefixes), and stick on
4871 the "# "s when we write it to `config.status'.
4873 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4874 `lib-src' and `arch-lib'.
4876 * configure: When generating report and `config.status' file, note
4877 that bindir only determines where `make install' and
4878 `build-install' will place the executables; this should make it
4879 clear that the ordinary build process will not try to install
4882 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4884 * make-dist: Change messages to say that we are 'making links to
4885 X', rather than 'copying X'. And put `' quotes around file names.
4887 * make-dist: Include '.tmp' in the name of the staging directory.
4889 * make-dist: Pass the `-f' option to rm when you're not sure that
4890 the files you're removing actually exist.
4892 * make-dist: When setting up etc/COPYING, always nuke whatever is
4893 there, and then copy it in, to make sure we get a real file.
4895 * make-dist: Don't try to distribute *.defns files any more. The
4896 only such file was for simula.el, which has been superceded by a
4897 version which doesn't have a separate .defns file.
4899 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4901 * make-dist: Don't distribute configured versions of config.h.in,
4902 paths.h.in, Makefile.in in src.
4904 * configure: Delete .tmp files before creating them; don't bother
4905 trying to make final targets writeable first, since it won't
4906 matter to move-if-change.
4908 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4910 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4911 mkdir and chmod in the center of all the conditionals. GNU Make
4912 will strip these out, but other makes won't.
4914 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4916 * make-dist: Include move-if-change in list of files to distribute.
4918 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4920 * configure: Remove any "." elements from the program name.
4922 * configure: Don't record the values of all the possible arguments
4923 in config.status; only record the options that the user specified.
4925 * configure: Use move-if-change to move in the new src/config.h.
4927 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4929 * move-if-change: New file, copied from gcc release.
4930 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4931 a temp file, so we don't update paths.h if an error occurs or if
4932 it doesn't need changing.
4934 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4936 * Makefile.in (src/paths.h): Do not install a value for the
4937 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4938 * build-install.in: Same thing.
4940 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4942 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4943 latter, being a typo, is always false, resulting in a program
4944 whose default behaviour is to painstakingly build a copy of the
4945 source tree, and then delete it. Rah.
4947 * Makefile.in: Add dist target, and comment for it.
4949 * configure: When scanning <signal.h> for a declaration for
4950 signal, create a symbolic link with a name ending in .c, so the
4951 compiler won't complain that it's only been given .h files.
4953 * configure: Check whether there are any arguments available
4954 before shifting to get the value of a non-boolean parameter.
4956 * make-dist: Doc fix.
4958 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4960 * configure: Instead of grepping /usr/include/signal.h for a
4961 signal declaration, run /usr/include/signal.h or
4962 /usr/include/sys/signal.h through cpp and grep for the
4965 * configure: Redirect the output of grep to /dev/null instead of
4966 using grep -s - that flag means different things on other systems.
4968 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4969 since the former is recognizable even if you don't know what
4971 * configure: Accomodate that change.
4973 * configure: Accept options for all of the directories you can
4974 change in the Makefile.
4976 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4978 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4979 FOO before you can use them.
4981 * build-install.in: Made the "Where To Install Things" section
4982 conform with the similar section from Makefile.in. Copied section
4983 which builds src/paths.h from src/paths.h.in from the Makefile.
4985 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4987 * configure: Write config.status to pass its command-line
4988 arguments on to configure, so that people can use it to recreate
4989 an old configuration, with minor changes.
4991 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4993 * configure: Don't rely on option variables being unset if their
4994 values are the empty string. In particular, when producing the
4995 English report, don't assume that highpri will be unset when no
4996 increased priority has been requested; -highpri='' should be the
4997 same as omitting -highpri altogether.
4999 * configure: Fix dumb bug: when running the system and machine
5000 description files through cpp, mark those lines that we want to
5001 evaluate with the string '@configure@', and then only evaluate
5002 them. This way if the files include anything that actually
5003 generates text (type definitions or external declarations, say),
5004 we won't try to eval it.
5006 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5008 * make-dist: New shell script.
5010 * configure: When creating foo from foo.in, make foo read-only to
5011 remind people to edit the .in file instead.
5013 * INSTALL: Changed references to config.h-dist to config.h.in.
5014 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
5015 to build src/paths.h from src/paths.h.in; added a paragraph to do
5017 * configure, Makefile, build-install: Changed filenames like
5020 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5022 * Makefile, build-install: Renamed to Makefile.in and
5023 build-install.in; the configure script will edit these to produce
5024 the usable Makefile and build-install.
5025 * configure: Changed to produce ./Makefile, ./build-install,
5026 lib-src/Makefile, and src/Makefile from their *.in counterparts,
5027 instead of editing them in place.
5029 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5031 * Makefile: Re-arranged so that the undumped Emacs will search
5032 ../lisp *after* the site's local elisp files.
5033 (locallisppath, dumplisppath): New variables.
5034 (lisppath): This variable's default value is now chosen based on
5035 $(locallisppath) and $(lispdir); while it used to be the
5036 customization point for adding site-local elisp directories to
5037 load-path, that job is now handled mostly by locallisppath.
5038 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
5039 Check the values being assigned to the *LOADSEARCH macros for null
5040 path elements (like '::' in 'foo::bar').
5042 * configure: When checking if the machine- and system-dependent
5043 files define a particular macro or not, actually run them through
5044 CPP and test the macros with #ifs, instead of just grepping for
5045 the macros' names. In particular, check for SYSTEM_MALLOC in this
5048 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
5050 * Makefile (install): Don't use -s in install. (Keep the symbols.)
5052 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5054 * configure: Make the config.status file an executable shell
5055 script which will recreate the same configuration. Include the
5056 verbal description of the current configuration as a comment in
5060 * Makefile: brought the Makefile up to the GNU coding
5061 standards, as described in standards.text:
5062 (TAGS): New name for the target which rebuilds the tags table.
5063 (check): New target; doesn't do anything yet.
5064 (mostlyclean): New target, synonymous with clean.
5065 (realclean): New target. Currently, this just calls the
5066 subdirectories's makefiles and then deletes config.status.
5067 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
5069 Installation directory variables changed to conform.
5070 (install, install.sysv, install.xenix, install.aix): Changed the
5071 code which copies the directories into their installed location to
5072 allow the installed locations to be in several different
5073 directories; the old version assumed that they would all be in
5075 (mkdir, lockdir): Allow the installed locations to be in several
5076 different directories.
5079 * build-install: Use the same variable names as the Makefile.
5080 Allow the installed locations to be in several different
5083 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5085 * Makefile (src/paths.h): Instead of using a single sed command to
5086 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
5087 separately, and don't forget to append "/!!!SuperLock!!!" to the
5088 value of the PATH_SUPERLOCK macro.
5090 * config.emacs: Renamed to configure, for consistency with other
5091 GNU products. Internal references changed.
5092 INSTALL, Makefile: References changed.
5094 * lock: New directory, which should always be empty. If this
5095 directory doesn't exist, Emacs won't complain; it just won't lock.
5096 Having this here means that people can just unpack Emacs, build
5097 it, and have locking work.
5099 * share-lib: Re-renamed to etc, for the sake of tradition.
5100 * config.emacs: Changed default value for datadir to ../etc.
5101 * INSTALL, README: Adjusted.
5103 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5105 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
5106 by running CPP on the appropriate s/*.h and m/*.h files.
5108 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5110 * config.emacs: Make sure to set the "exit on error" flag once
5111 we've removed config.status; errors should abort the configuration.
5113 1992-02-15 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5115 * config.emacs: Added -distribute option, so that the Makefile
5116 paths are in their proper form. I don't know why this matters.
5118 1992-02-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5120 * local-lisp: New directory, empty in the distribution, for people
5121 to put local elisp code in.
5122 * config.emacs: Include it in the default load path.
5123 * README: Document it.
5125 1992-01-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5127 * config.emacs: Guess the type of signal handling functions based
5128 on the contents of /usr/include/signal.h.
5130 * config.emacs: Print out progress report messages.
5132 * Makefile (src/paths.h): Don't generically replace
5133 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
5134 editing of the other entries, and each entry should be dealt with
5137 * build-install: Converted from C-shell to Bourne shell.
5138 * config.emacs: Edit build-install properly.
5140 * config.emacs: Doc fix.
5142 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
5144 * Makefile (install): Remove `B' from tar xf command.
5146 1992-01-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5148 * config.emacs: Removed support for the `maintain-environment'
5149 option; the only important difference between this and its absence
5151 * INSTALL: Removed mention of `maintain-environment'.
5153 * config.emacs: Fix arguments to sed when processing boolean
5156 1991-12-05 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
5158 * config.emacs: New file, to help automate the installation
5161 * Makefile: Lots of changes to support the separation of etc into
5162 architecture-dependent and -independent files:
5163 (EMACSROOT): New variable, giving the directory under which all of
5164 Emacs's libraries should be installed. Changed rest of file to
5166 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
5167 (DATADIR): New variable, denoting architecture-independent dir.
5168 (LOCKDIR): New variable, for completeness.
5169 (SUBDIR): No more etc, new lib-src.
5170 (COPYDIR): No more etc, new arch-lib and share-lib.
5171 (src/paths.h): Set PATH_DATA and the LOCK macros too.
5172 (src): Now depends on lib-src, not etc.
5173 * build-install: Changes parallel to the above.
5174 * README: Describe the new arrangement.
5176 * vms: New subdirectory for all the VMS stuff.
5178 1991-12-03 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
5180 * Makefile (LISPPATH): New variable.
5181 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
5183 1990-09-28 Richard Stallman (rms@mole.ai.mit.edu)
5185 * Makefile (install, install.sysv, install.xenix):
5186 Install wakeup instead of loadst. No need for setuid or setgid.
5188 1990-08-07 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5190 * Makefile (clean): Clean etc if that's not the installation dir.
5192 1990-04-26 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5194 * Makefile (paths.h): Make sed alter each name in the path.
5196 1988-08-30 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5198 * Makefile (install.sysv): Use cpio, not tar.
5200 1988-08-03 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5202 * Makefile (lockdir): Rename `lock' target.
5203 Depend on it from install*, not from `all'.
5205 1988-05-16 Richard Stallman (rms@frosted-flakes.ai.mit.edu)
5207 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
5208 to match build-install and paths.h.
5211 ;; coding: iso-2022-7bit-unix
5214 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001
5215 Free Software Foundation, Inc.
5216 Copying and distribution of this file, with or without modification,
5217 are permitted provided the copyright notice and this notice are preserved.