Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # make all      to compile and build Emacs.
   6 # make install  to install it.
   7 # make TAGS     to update tags tables.
   8 #
   9 # make clean  or  make mostlyclean
  10 #      Delete all files from the current directory that are normally
  11 #      created by building the program.  Don't delete the files that
  12 #      record the configuration.  Also preserve files that could be made
  13 #      by building, but normally aren't because the distribution comes
  14 #      with them.
  15 #
  16 #      Delete `.dvi' files here if they are not part of the distribution.
  17 #
  18 # make distclean
  19 #      Delete all files from the current directory that are created by
  20 #      configuring or building the program.  If you have unpacked the
  21 #      source and built the program without creating any other files,
  22 #      `make distclean' should leave only the files that were in the
  23 #      distribution.
  24 #
  25 # make realclean
  26 #      Delete everything from the current directory that can be
  27 #      reconstructed with this Makefile.  This typically includes
  28 #      everything deleted by distclean, plus more: C source files
  29 #      produced by Bison, tags tables, info files, and so on.
  30 #
  31 # make extraclean
  32 #      Still more severe - delete backup and autosave files, too.
  33
  34 SHELL = /bin/sh
  35
  36 # If Make doesn't predefine MAKE, set it here.
  37 @SET_MAKE@
  38
  39 # ==================== Things `configure' Might Edit ====================
  40
  41 CC=@CC@
  42 CPP=@CPP@
  43 C_SWITCH_SYSTEM=@c_switch_system@
  44 ALLOCA=@ALLOCA@
  45 LN_S=@LN_S@
  46 CFLAGS=@CFLAGS@
  47 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  48 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  49 YACC=@YACC@
  50
  51 ### These help us choose version- and architecture-specific directories
  52 ### to install files in.
  53
  54 ### This should be the number of the Emacs version we're building,
  55 ### like `18.59' or `19.0'.
  56 version=@version@
  57
  58 ### This should be the name of the configuration we're building Emacs
  59 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  60 configuration=@configuration@
  61
  62 ### Libraries which should be edited into lib-src/Makefile.
  63 libsrc_libs=@libsrc_libs@
  64
  65 # ==================== Where To Install Things ====================
  66
  67 # The default location for installation.  Everything is placed in
  68 # subdirectories of this directory.  The default values for many of
  69 # the variables below are expressed in terms of this one, so you may
  70 # not need to change them.  This defaults to /usr/local.
  71 prefix=@prefix@
  72
  73 # Like `prefix', but used for architecture-specific files.
  74 exec_prefix=@exec_prefix@
  75
  76 # Where to install Emacs and other binaries that people will want to
  77 # run directly (like etags).
  78 bindir=@bindir@
  79
  80 # Where to install architecture-independent data files.  ${lispdir}
  81 # and ${etcdir} are subdirectories of this.
  82 datadir=@datadir@
  83
  84 # Where to install and expect the files that Emacs modifies as it
  85 # runs.  These files are all architecture-independent. Right now, the
  86 # only such data is the locking directory; ${lockdir} is a
  87 # subdirectory of this.
  88 statedir=@statedir@
  89
  90 # Where to install and expect executable files to be run by Emacs
  91 # rather than directly by users, and other architecture-dependent
  92 # data.  ${archlibdir} is a subdirectory of this.
  93 libdir=@libdir@
  94
  95 # Where to install Emacs's man pages, and what extension they should have.
  96 mandir=@mandir@
  97 manext=.1
  98
  99 # Where to install and expect the info files describing Emacs.  In the
 100 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 101 # since there are now many packages documented with the texinfo
 102 # system, it is inappropriate to imply that it is part of Emacs.
 103 infodir=@infodir@
 104
 105 # Where to find the source code.  The source code for Emacs's C kernel is
 106 # expected to be in ${srcdir}/src, and the source code for Emacs's
 107 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 108 # set by the configure script's `--srcdir' option.
 109 srcdir=@srcdir@
 110
 111 # Tell make where to find source files; this is needed for the makefiles.
 112 VPATH=@srcdir@
 113
 114 # ==================== Emacs-specific directories ====================
 115
 116 # These variables hold the values Emacs will actually use.  They are
 117 # based on the values of the standard Make variables above.
 118
 119 # Where to install the lisp files distributed with
 120 # Emacs.  This includes the Emacs version, so that the
 121 # lisp files for different versions of Emacs will install
 122 # themselves in separate directories.
 123 lispdir=@lispdir@
 124
 125 # Directories Emacs should search for lisp files specific
 126 # to this site (i.e. customizations), before consulting
 127 # ${lispdir}.  This should be a colon-separated list of
 128 # directories.
 129 locallisppath=@locallisppath@
 130
 131 # Where Emacs will search to find its lisp files.  Before
 132 # changing this, check to see if your purpose wouldn't
 133 # better be served by changing locallisppath.  This
 134 # should be a colon-separated list of directories.
 135 lisppath=@lisppath@
 136
 137 # Where Emacs will search for its lisp files while
 138 # building.  This is only used during the process of
 139 # compiling Emacs, to help Emacs find its lisp files
 140 # before they've been installed in their final location.
 141 # It's usually identical to lisppath, except that the
 142 # entry for the directory containing the installed lisp
 143 # files has been replaced with ../lisp.  This should be a
 144 # colon-separated list of directories.
 145 buildlisppath=${srcdir}/lisp
 146
 147 # Where to install the other architecture-independent
 148 # data files distributed with Emacs (like the tutorial,
 149 # the cookie recipes and the Zippy database). This path
 150 # usually contains the Emacs version number, so the data
 151 # files for multiple versions of Emacs may be installed
 152 # at once.
 153 etcdir=@etcdir@
 154
 155 # Where to create and expect the locking directory, where
 156 # the Emacs locking code keeps track of which files are
 157 # currently being edited.
 158 lockdir=@lockdir@
 159
 160 # Where to put executables to be run by Emacs rather than
 161 # the user.  This path usually includes the Emacs version
 162 # and configuration name, so that multiple configurations
 163 # for multiple versions of Emacs may be installed at
 164 # once.
 165 archlibdir=@archlibdir@
 166
 167 # Where to put the docstring file.
 168 docdir=@docdir@
 169
 170 # ==================== Utility Programs for the Build ====================
 171
 172 # Allow the user to specify the install program.
 173 INSTALL = @INSTALL@
 174 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 175 INSTALL_DATA = @INSTALL_DATA@
 176
 177 # ============================= Targets ==============================
 178
 179 # What emacs should be called when installed.
 180 EMACS = emacs
 181
 182 # Subdirectories to make recursively.  `lisp' is not included
 183 # because the compiled lisp files are part of the distribution
 184 # and you cannot remake them without installing Emacs first.
 185 SUBDIR = lib-src src
 186
 187 # The makefiles of the directories in $SUBDIR.
 188 SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
 189
 190 # Subdirectories to install, and where they'll go.
 191 # lib-src's makefile knows how to install it, so we don't do that here.
 192 # When installing the info files, we need to do special things to
 193 # avoid nuking an existing dir file, so we don't do that here;
 194 # instead, we have written out explicit code in the `install' targets.
 195 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 196 COPYDESTS = ${etcdir} ${lispdir}
 197
 198 all:    paths-force ${SUBDIR}
 199
 200 removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/'
 201
 202 # Note that sed is not in /bin on 386bsd.
 203 src/paths.h: Makefile ${srcdir}/src/paths.h.in
 204         @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
 205         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 206           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 207           sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp              \
 208           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";'        \
 209           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
 210           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 211           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 212           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 213           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";'                    \
 214           -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
 215         @${srcdir}/move-if-change src/paths.h.tmp src/paths.h
 216
 217 # For `make all',
 218 # we force the rebuilding of src/paths.h because the user might give
 219 # make different values for the various directories.  Since we use
 220 # move-if-change, src/paths.h only actually changes if the user did
 221 # something notable, so the only unnecessary work we do is in building
 222 # src/paths.h.tmp, which isn't much.
 223 # Note that sed is not in /bin on 386bsd.
 224 paths-force: FRC.src.paths.h
 225         @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
 226         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 227           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 228           sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp              \
 229           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";'        \
 230           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
 231           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 232           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 233           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 234           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";'                    \
 235           -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
 236         @${srcdir}/move-if-change src/paths.h.tmp src/paths.h
 237
 238 src:    lib-src FRC.src src/paths.h
 239
 240 # This ought to depend on src/paths.h, so that in parallel make
 241 # src/paths.h will be available for the compilations in lib-src.
 242 # But that causes trouble in `make install' if a different prefix
 243 # is specified at that time.
 244 lib-src: FRC.lib-src src/paths.h
 245
 246 .RECURSIVE: ${SUBDIR}
 247
 248 ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
 249         cd $@; $(MAKE) all $(MFLAGS) \
 250           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 251           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 252
 253 blessmail: ${SUBDIR_MAKEFILES} src FRC
 254         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) MAKE='${MAKE}'
 255
 256 Makefile: Makefile.in config.status
 257         ./config.status
 258
 259 src/Makefile: src/Makefile.in.in config.status
 260         ./config.status
 261
 262 lib-src/Makefile: lib-src/Makefile.in config.status
 263         ./config.status
 264
 265 oldXMenu/Makefile: oldXMenu/Makefile.in config.status
 266         ./config.status
 267
 268 lwlib/Makefile: lwlib/Makefile.in config.status
 269         ./config.status
 270
 271 # ==================== Installation ====================
 272
 273 ## If we let lib-src do its own installation, that means we
 274 ## don't have to duplicate the list of utilities to install in
 275 ## this Makefile as well.
 276
 277 ## On AIX, use tar xBf.
 278 ## On Xenix, use tar xpf.
 279
 280 .PHONY: install mkdir
 281
 282 ## We delete each directory in ${COPYDESTS} before we copy into it;
 283 ## that way, we can reinstall over directories that have been put in
 284 ## place with their files read-only (perhaps because they are checked
 285 ## into RCS).  In order to make this safe, we make sure that the
 286 ## source exists and is distinct from the destination.
 287 ## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
 288 ## ever modify src/paths.h.
 289 install: ${SUBDIR} install-arch-dep install-arch-indep blessmail;
 290
 291 ### Note that we copy the DOC-* files from the build etc directory
 292 ### as well as lots of things from ${srcdir}/etc.
 293 install-arch-dep: mkdir
 294         (cd lib-src; \
 295           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 296             exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
 297             archlibdir=${archlibdir})
 298         ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
 299         -chmod 1755  ${bindir}/emacs-${version}
 300         rm -f ${bindir}/$(EMACS)
 301         -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
 302
 303 ### Note that we copy the DOC-* files from the build etc directory
 304 ### as well as lots of things from ${srcdir}/etc.
 305 install-arch-indep: mkdir
 306         -set ${COPYDESTS} ; \
 307          for dir in ${COPYDIR} ; do \
 308            if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 309              rm -rf $$1 ; \
 310            fi ; \
 311            shift ; \
 312          done
 313         -set ${COPYDESTS} ; \
 314          mkdir ${COPYDESTS} ; \
 315          for dir in ${COPYDIR} ; do \
 316            dest=$$1 ; shift ; \
 317            [ -d $${dir} ] \
 318            && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 319            && (echo "Copying $${dir}..." ; \
 320                (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
 321                for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
 322                  rm -rf $${subdir}/RCS ; \
 323                  rm -rf $${subdir}/CVS ; \
 324                  rm -f  $${subdir}/\#* ; \
 325                  rm -f  $${subdir}/*~ ; \
 326                done) ; \
 327          done
 328         if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
 329         then \
 330            echo "Copying etc/DOC* ..." ; \
 331            (cd etc; tar -cf - DOC*)|(cd ${docdir}; umask 0; tar -xvf - ); \
 332         else true; fi
 333         thisdir=`/bin/pwd`; \
 334         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
 335         then \
 336           (cd ${srcdir}/info ; \
 337            if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
 338              (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
 339            fi ; \
 340            for f in cl* dired-x* emacs* forms* gnus* info* sc* vip* ; do \
 341              (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
 342            done); \
 343         else true; fi
 344         thisdir=`/bin/pwd`; cd ${srcdir}/etc; for page in emacs etags ctags ; do \
 345           (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext}); \
 346         done
 347
 348 ### Build all the directories we're going to install Emacs in.  Since
 349 ### we may be creating several layers of directories (for example,
 350 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path
 351 ### instead of mkdir.  Not all systems' mkdirs have the `-p' flag.
 352 mkdir: FRC.mkdir
 353         ./lib-src/make-path ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
 354           ${bindir} ${datadir} ${docdir} ${libdir} \
 355           `echo ${locallisppath} | sed 's/:/ /'`
 356         -chmod 777 ${lockdir}
 357
 358 ### Delete all the installed files that the `install' target would
 359 ### create (but not the noninstalled files such as `make all' would
 360 ### create).
 361 ###
 362 ### Don't delete the lisp and etc directories if they're in the source tree.
 363 uninstall:
 364         (cd lib-src;                                    \
 365          $(MAKE) $(MFLAGS) uninstall                    \
 366             prefix=${prefix} exec_prefix=${exec_prefix} \
 367             bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
 368         for dir in ${lispdir} ${etcdir} ; do            \
 369           if [ -d $${dir} ]; then                       \
 370             case `(cd $${dir} ; /bin/pwd)` in           \
 371               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 372               * ) rm -rf $${dir} ;;                     \
 373             esac ;                                      \
 374             case $${dir} in                             \
 375               ${datadir}/emacs/${version}/* )           \
 376                 rm -rf ${datadir}/emacs/${version}      \
 377               ;;                                        \
 378             esac ;                                      \
 379           fi ;                                          \
 380         done
 381         (cd ${infodir}; rm -f cl* emacs* forms* info* vip*)
 382         (cd ${mandir};  rm -f emacs.1 etags.1 ctags.1)
 383         (cd ${bindir};  rm -f emacs-${version} emacs)
 384
 385
 386 ### Some makes seem to remember that they've built something called FRC,
 387 ### so you can only use a given FRC once per makefile.
 388 FRC FRC.src.paths.h FRC.src FRC.lib-src FRC.mkdir:
 389 FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean:
 390
 391 # ==================== Cleaning up and miscellanea ====================
 392
 393 .PHONY: mostlyclean clean distclean realclean extraclean
 394
 395 ### `mostlyclean'
 396 ###      Like `clean', but may refrain from deleting a few files that people
 397 ###      normally don't want to recompile.  For example, the `mostlyclean'
 398 ###      target for GCC does not delete `libgcc.a', because recompiling it
 399 ###      is rarely necessary and takes a lot of time.
 400 mostlyclean: FRC.mostlyclean
 401         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 402         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 403         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 404         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 405         -(cd man &&   $(MAKE) $(MFLAGS) mostlyclean)
 406
 407 ### `clean'
 408 ###      Delete all files from the current directory that are normally
 409 ###      created by building the program.  Don't delete the files that
 410 ###      record the configuration.  Also preserve files that could be made
 411 ###      by building, but normally aren't because the distribution comes
 412 ###      with them.
 413 ###
 414 ###      Delete `.dvi' files here if they are not part of the distribution.
 415 clean: FRC.clean
 416         (cd src;      $(MAKE) $(MFLAGS) clean)
 417         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 418         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 419         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 420         -(cd man &&   $(MAKE) $(MFLAGS) clean)
 421
 422 ### `distclean'
 423 ###      Delete all files from the current directory that are created by
 424 ###      configuring or building the program.  If you have unpacked the
 425 ###      source and built the program without creating any other files,
 426 ###      `make distclean' should leave only the files that were in the
 427 ###      distribution.
 428 top_distclean=\
 429         rm -f config.status build-install ; \
 430         rm -f Makefile ${SUBDIR_MAKEFILES} ; \
 431         (cd lock ; rm -f *)
 432 distclean: FRC.distclean
 433         (cd src;      $(MAKE) $(MFLAGS) distclean)
 434         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 435         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 436         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 437         (cd man &&    $(MAKE) $(MFLAGS) distclean)
 438         ${top_distclean}
 439
 440
 441 ### `realclean'
 442 ###      Delete everything from the current directory that can be
 443 ###      reconstructed with this Makefile.  This typically includes
 444 ###      everything deleted by distclean, plus more: C source files
 445 ###      produced by Bison, tags tables, info files, and so on.
 446 ###
 447 ###      One exception, however: `make realclean' should not delete
 448 ###      `configure' even if `configure' can be remade using a rule in the
 449 ###      Makefile.  More generally, `make realclean' should not delete
 450 ###      anything that needs to exist in order to run `configure' and then
 451 ###      begin to build the program.
 452 realclean: FRC.realclean
 453         (cd src;      $(MAKE) $(MFLAGS) realclean)
 454         (cd oldXMenu; $(MAKE) $(MFLAGS) realclean)
 455         (cd lwlib;    $(MAKE) $(MFLAGS) realclean)
 456         (cd lib-src;  $(MAKE) $(MFLAGS) realclean)
 457         -(cd man &&   $(MAKE) $(MFLAGS) realclean)
 458         ${top_distclean}
 459
 460 ### This doesn't actually appear in the coding standards, but Karl
 461 ### says GCC supports it, and that's where the configuration part of
 462 ### the coding standards seem to come from.  It's like distclean, but
 463 ### it deletes backup and autosave files too.
 464 extraclean:
 465         for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 466         -(cd lock; rm *)
 467         -rm config.status config-tmp-*
 468         -rm -f *~ \#*
 469
 470 ### Unlocking and relocking.  The idea of these productions is to reduce
 471 ### hassles when installing an incremental tar of Emacs.  Do `make unlock'
 472 ### before unlocking the file to take the write locks off all sources so
 473 ### that tar xvof will overwrite them without fuss.  Then do `make relock'
 474 ### afterward so that VC mode will know which files should be checked in
 475 ### if you want to mung them.
 476 ###
 477 ### Note: it's no disaster if these productions miss a file or two; tar
 478 ### and VC will swiftly let you know if this happens, and it is easily
 479 ### corrected.
 480 SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
 481         README build-install.in configure make-dist move-if-change
 482
 483 .PHONY: unlock relock
 484
 485 unlock:
 486         chmod u+w $(SOURCES) cpp/*
 487         -(cd elisp; chmod u+w Makefile README *.texi)
 488         (cd etc; $(MAKE) $(MFLAGS) unlock)
 489         (cd lib-src; $(MAKE) $(MFLAGS) unlock)
 490         (cd lisp; $(MAKE) $(MFLAGS) unlock)
 491         (cd lisp/term; chmod u+w README *.el)
 492         (cd man; chmod u+w *texi* ChangeLog split-man)
 493         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 494         (cd lwlib; chmod u+w *.[ch] Makefile README)
 495         (cd src; $(MAKE) $(MFLAGS) unlock)
 496
 497 relock:
 498         chmod u-w $(SOURCES) cpp/*
 499         -(cd elisp; chmod u-w Makefile README *.texi)
 500         (cd etc; $(MAKE) $(MFLAGS) relock)
 501         (cd lib-src; $(MAKE) $(MFLAGS) relock)
 502         (cd lisp; $(MAKE) $(MFLAGS) relock)
 503         (cd lisp/term; chmod u+w README *.el)
 504         (cd man; chmod u+w *texi* ChangeLog split-man)
 505         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 506         (cd lwlib; chmod u+w *.[ch] Makefile README)
 507         (cd src; $(MAKE) $(MFLAGS) relock)
 508
 509 TAGS tags:      lib-src
 510         cd ${srcdir}/src; $(MAKE) tags
 511
 512 check:
 513         @echo "We don't have any tests for GNU Emacs yet."
 514
 515 dist:
 516         cd ${srcdir}; make-dist
 517
 518 .PHONY: info dvi dist check
 519 force-info:
 520 info: force-info
 521         (cd ${srcdir}/man; $(MAKE) $(MFLAGS) info)
 522 dvi:
 523         (cd ${srcdir}/man; $(MAKE) $(MFLAGS) dvi)