ChangeLog

   1 2001-09-13  Milan Zamazal  <pdm@zamazal.org>
   2
   3         * progmodes/compile.el (grep-compute-defaults): Don't set
   4         grep-command/grep-find-command when it is already non-nil.
   5         (grep-command): Make it a user option.
   6         (grep-find-command): Likewise.
   7
   8 2001-09-05  Gerd Moellmann  <gerd@gnu.org>
   9
  10         * configure.in: Avoid `$@' which is handled specially in
  11         Autoconf 2.52.  From "Adam J. Richter" <adam@yggdrasil.com>.
  12
  13 2001-09-04  Andrew Innes  <andrewi@gnu.org>
  14
  15         * admin/nt/makedist.bat: Remove reference to obsolete file
  16         GETTING.GNU.SOFTWARE.  Remove outdated comments.  Explain about
  17         version of tar used.
  18
  19 2001-09-01  Eli Zaretskii  <eliz@is.elta.co.il>
  20
  21         * make-dist (nt): Add subdirs.el to the list of distributed files.
  22
  23 2001-08-14  Eli Zaretskii  <eliz@is.elta.co.il>
  24
  25         * configure.in (machine): Add an entry for
  26         hppa1.1-hitachi-hiuxwe2*.
  27
  28 2001-05-28  Gerd Moellmann  <gerd@gnu.org>
  29
  30         * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
  31         LC_MESSAGES and LANG.  From Karl Eichwalder <keichwa@gmx.net>.
  32
  33 2001-05-14  Gerd Moellmann  <gerd@gnu.org>
  34
  35         * make-dist: Copy texinfo.tex unconditionally.
  36
  37 2001-04-25  Eli Zaretskii  <eliz@is.elta.co.il>
  38
  39         * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
  40         that are installed.
  41
  42 2001-04-06  Gerd Moellmann  <gerd@gnu.org>
  43
  44         * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
  45         Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
  46
  47         * make-dist: Handle leim/MISC-DIC.  Only include
  48         `[a-zA-Z]*.{el,elc}' from leim/quail.
  49
  50 2001-04-05  Gerd Moellmann  <gerd@gnu.org>
  51
  52         * Makefile.in (install-arch-indep): Remove .cvsignore files.
  53
  54 2001-03-30  Gerd Moellmann  <gerd@gnu.org>
  55
  56         * Makefile.in (.PHONY): Add for bootstrap targets.
  57         (bootstrap-clean): New target.
  58         (bootstrap): Use it instead of `clean'.
  59
  60 2001-03-29  Eli Zaretskii  <a34785@is.elta.co.il>
  61
  62         * Makefile.in (SUBDIR): Remove leim.
  63         (all, .RECURSIVE, extraclean): Add leim explicitly.
  64         (leim): Provide separate rule which exports PARALLEL=0 into the
  65         environment.
  66
  67 2001-03-20  Gerd Moellmann  <gerd@gnu.org>
  68
  69         * configure.in (HAVE_XPM): Don't print the result of the check for
  70         XpmReturnAllocPixels if we don't have an xpm.h.
  71
  72 2001-03-05  Gerd Moellmann  <gerd@gnu.org>
  73
  74         * COPYING: New file.
  75
  76 2001-03-04  Eli Zaretskii  <eliz@is.elta.co.il>
  77
  78         * config.bat: Update the copyright.
  79
  80 2001-02-23  Kenichi Handa  <handa@etl.go.jp>
  81
  82         * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
  83         converts `..' to `. .'.  If it converts, set CPP_NEED_TRADITIONAL
  84         to `yes'.  Later in AC_OUTPUT, check this variable.
  85
  86 2001-02-09  Dave Love  <fx@gnu.org>
  87
  88         * AUTHORS: Updated.
  89
  90 2001-02-06  Eli Zaretskii  <eliz@is.elta.co.il>
  91
  92         * info/dir (Ebrowse): Fix the entry (was missing a dot).
  93
  94 2001-02-02  Gerd Moellmann  <gerd@gnu.org>
  95
  96         * mkinstalldirs (errstatus): Chmod a+rx directories we create.
  97
  98         * Makefile.in (uninstall): Ignore exit code of `rm'.
  99
 100         * Makefile.in (uninstall): Remove more info files.  Remove
 101         ${libexecdir}/emacs/${version}.  Remove ${archlibdir}/fns-*.
 102
 103 2001-01-31  Gerd Moellmann  <gerd@gnu.org>
 104
 105         * noleim-Makefile.in (extraclean): Add.
 106
 107 2001-01-28  Gerd Moellmann  <gerd@gnu.org>
 108
 109         * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
 110         it quiet.
 111
 112 2001-01-24  Colin Walters  <walters@cis.ohio-state.edu>
 113
 114         * Makefile.in (tags): Fix typo.
 115
 116 2001-01-13  Kenichi Handa  <handa@etl.go.jp>
 117
 118         * configure.in: Fix typo in the code setting x_search_path.
 119
 120 2001-01-10  Dave Love  <fx@gnu.org>
 121
 122         * configure.in: Don't reset LIBS at end of -lXmu test.  Test for
 123         -lXext.
 124         (HAVE_XKBGETKEYBOARD): Fix reporting of result.
 125         (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
 126         (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
 127         Don't frob CFLAGS.  Remove extra X libs from AC_CHECK_LIB
 128         (now in $LIBS).
 129
 130 2001-01-08  Eli Zaretskii  <eliz@is.elta.co.il>
 131
 132         * config.bat: Run the preprocessor with -traditional.
 133
 134 2001-01-01  Eli Zaretskii  <eliz@is.elta.co.il>
 135
 136         * INSTALL: Move copying conditions to end of file.
 137
 138 2000-12-27  Eli Zaretskii  <eliz@is.elta.co.il>
 139
 140         * INSTALL: Add basic installation procedure which assumes
 141         `configure' does its job.  Elaborate on image support libraries.
 142         Add a pointer to Xaw3d library.  Add advice about solving
 143         configure-time problems by looking in config.log and setting
 144         variables in the environment.
 145
 146 2000-12-27  Gerd Moellmann  <gerd@gnu.org>
 147
 148         * Makefile.in (install-arch-indep): If tar fails, exit with
 149         exit code 1.
 150
 151 2000-12-19  Gerd Moellmann  <gerd@gnu.org>
 152
 153         * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
 154         source file includes XKBlib.h.  On some broken Solaris systems,
 155         there is an XKBlib.h, reportedly, but header files included by
 156         XKBlib.h are missing.
 157
 158 2000-12-14  Gerd Moellmann  <gerd@gnu.org>
 159
 160         * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
 161
 162 2000-12-11  Dave Love  <fx@gnu.org>
 163
 164         * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
 165
 166 2000-12-11  Paul Eggert  <eggert@twinsun.com>
 167
 168         * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
 169         Merge fixes from latest GNU tar version.  These macros no longer
 170         futz with _XOPEN_SOURCE, as that was not portable in practice.
 171         (AC_FUNC_FSEEKO): New macro.
 172
 173         * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
 174         ftello.
 175
 176 2000-12-05  Dave Love  <fx@gnu.org>
 177
 178         * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
 179
 180 2000-12-02  Eli Zaretskii  <eliz@is.elta.co.il>
 181
 182         * info/dir: Change the category to "Emacs".
 183
 184 2000-12-01  Gerd Moellmann  <gerd@gnu.org>
 185
 186         * make-dist (tempdir): Remove epaths.h from the distribution
 187         instead of paths.h.
 188
 189 2000-11-23  Eli Zaretskii  <eliz@is.elta.co.il>
 190
 191         * config.bat: Check for existence of djecho.exe, and print an
 192         error message if it is not available.
 193
 194         * INSTALL: Describe possible problem with djecho.exe in old
 195         versions of DJGPP v2.x.
 196
 197 2000-11-23  Gerd Moellmann  <gerd@gnu.org>
 198
 199         * configure.in: Initialize HAVE_LIBXP to no.
 200
 201 2000-11-22  Gerd Moellmann  <gerd@gnu.org>
 202
 203         * configure.in: Use m/macppc.h instead of the non-existent
 204         m/powerpc.h.
 205
 206 2000-11-21  Gerd Moellmann  <gerd@gnu.org>
 207
 208         * Makefile.in (install-arch-indep): Also install info/eshell*
 209         and info/speedbar*.
 210
 211         * configure.in (HAVE_PNG): Check for the presence of
 212         png_get_channels to rule out older PNG libs.
 213
 214         * configure.in (AC_OUTPUT): Arrange to emit definitions of
 215         GCC and NON_GNU_CPP into config.status.
 216
 217 2000-11-20  Dave Love  <fx@gnu.org>
 218
 219         * configure.in: Fix last change.
 220
 221         * GETTING.GNU.SOFTWARE: Deleted.
 222         * FTP: New file to replace it.
 223         * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
 224
 225 2000-11-20  Gerd Moellmann  <gerd@gnu.org>
 226
 227         * configure.in: Use -traditional with GNU cpp.
 228
 229 2000-11-17  Gerd Moellmann  <gerd@gnu.org>
 230
 231         * make-dist: Handle the Mac port.  Distribute all makefile.w32-in.
 232         Distribute more files from the nt/ subdir.  Distribute PBM
 233         image files from subdirs of lisp/.  Distribute old change logs
 234         from subdirs of lisp/.  Distribute play/5x5.el.
 235
 236 2000-11-11  Dave Love  <fx@gnu.org>
 237
 238         * config.sub, config.guess: Updated from master source.
 239
 240 2000-11-07  Dave Love  <fx@gnu.org>
 241
 242         * configure.in: Test for mkstemp.
 243
 244 2000-11-01  Eli Zaretskii  <eliz@is.elta.co.il>
 245
 246         * info/dir (Top): Rearrange menu items more logically, and put
 247         them into a single category.  Add menu items for RefTeX and
 248         Widget.
 249
 250 2000-10-29  Kai Gro\e,A_\e(Bjohann  <Kai.Grossjohann@CS.Uni-Dortmund.DE>
 251
 252         * Makefile.in (install-arch-indep): Use --info-dir instead of
 253         --dir-file, and a simple argument instead of --info-file, so that
 254         the Debian version of install-info also works.
 255
 256 2000-10-19  Eric M. Ludlam  <zappo@ultranet.com>
 257
 258         * info/dir (Speedbar): Add entry.
 259
 260 2000-10-16  Eli Zaretskii  <eliz@is.elta.co.il>
 261
 262         * INSTALL: Describe the new image-support options to the configure
 263         script.  List URLs where image support libraries can be found.
 264
 265 2000-10-14  Eli Zaretskii  <eliz@is.elta.co.il>
 266
 267         * info/dir (Top): Add an entry for Eshell.
 268
 269 2000-10-02  Dave Love  <fx@gnu.org>
 270
 271         * configure.in: Check for gai_strerror.
 272
 273 2000-10-01  Andreas Schwab  <schwab@suse.de>
 274
 275         * Makefile.in (install-arch-indep): Update list of installed info
 276         files.
 277
 278 2000-09-30  Gerd Moellmann  <gerd@gnu.org>
 279
 280         * configure.in: Support `sparc*-*-netbsd*'.
 281
 282 2000-09-29  Eli Zaretskii  <eliz@is.elta.co.il>
 283
 284         * info/dir (MIME): Add entry for emacs-mime.
 285
 286 2000-09-29  Dave Love  <fx@gnu.org>
 287
 288         * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
 289
 290 2000-09-26  Gerd Moellmann  <gerd@gnu.org>
 291
 292         * make-dist: Adapt to the change of leim/Makefile which was
 293         necessary to ensure a reasonably working `make dist'.
 294
 295         * leim-Makefile.in: Moved to leim/Makefile.in..
 296
 297         * noleim-Makefile.in: New file, formerly leim/Makefile.in.
 298
 299 2000-09-21  Kenichi Handa  <handa@etl.go.jp>
 300
 301         * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
 302         (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
 303         (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
 304         files to .elc.
 305         (${TIT}): Adjusted for the above change.
 306         (clean mostlyclean): Likewise.
 307         (.el.elc): New target.
 308
 309 2000-09-19  Gerd Moellmann  <gerd@gnu.org>
 310
 311         * make-dist: Include XPM and XBM files in lisp/ and subdirs
 312         in the distribution.
 313
 314 2000-09-18  Gerd Moellmann  <gerd@gnu.org>
 315
 316         * make-dist (skk): Rename to `ja-dic' because the leim directory
 317         was renamed.
 318
 319 2000-09-14  Dave Love  <fx@gnu.org>
 320
 321         * configure.in: Fix spurion in last change.
 322
 323 2000-09-14  Gerd Moellmann  <gerd@gnu.org>
 324
 325         * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
 326         configuration files instead of REL_ALLOC_MMAP.  Set REL_ALLOC
 327         to `no' if defined.  Change result report.
 328
 329 2000-09-08  Dave Love  <fx@gnu.org>
 330
 331         * configure.in: Remove spurious `@'s.
 332
 333         * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
 334         autoconf.
 335
 336 2000-09-06  Gerd Moellmann  <gerd@gnu.org>
 337
 338         * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
 339         file and print informational message.
 340
 341         * configure.in (AC_FUNC_MMAP): Add.
 342
 343 2000-09-01  Gerd Moellmann  <gerd@gnu.org>
 344
 345         * configure.in: Add ``checking'' messages for
 346         XpmReturnAllocPixels.
 347
 348 2000-08-28  Gerd Moellmann  <gerd@gnu.org>
 349
 350         * configure.in: Check <strings.h>; check `index' and `rindex'
 351         functions.
 352
 353 2000-08-26  Kenichi Handa  <handa@etl.go.jp>
 354
 355         * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
 356         "case "${canonical}" in".
 357
 358 2000-08-25  Dave Love  <fx@gnu.org>
 359
 360         * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
 361
 362 2000-08-25  Kenichi Handa  <handa@etl.go.jp>
 363
 364         * leim-Makefile.in: Rename skk to ja-dic throughout the file.
 365
 366 2000-08-24  Gerd Moellmann  <gerd@gnu.org>
 367
 368         * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
 369         contains a relative path.  Protect against unusable values of
 370         $PWD.
 371
 372 2000-08-08  Eli Zaretskii  <eliz@is.elta.co.il>
 373
 374         * info/dir (WoMan): Add entry.
 375
 376         * config.bat (maindir): Update src/_gdbinit even if it does
 377         already exist.
 378
 379 2000-08-07  Gerd Moellmann  <gerd@gnu.org>
 380
 381         * Makefile.in (config.status): Prepend `$(srcdir)/' to
 382         `configure'.
 383
 384 2000-08-03  Gerd Moellmann  <gerd@gnu.org>
 385
 386         * configure.in: Add support for ia64*-*-linux*.
 387
 388 2000-07-27  Gerd Moellmann  <gerd@gnu.org>
 389
 390         * make-dist (aclocal.m4): Include in distribution.
 391
 392 2000-07-26  Dave Love  <fx@gnu.org>
 393
 394         * configure.in (AC_SYS_LARGEFILE): Moved earlier.
 395
 396 2000-07-24  Dave Love  <fx@gnu.org>
 397
 398         * configure.in: Add AC_SIZE_T.
 399
 400 2000-07-18  Dave Love  <fx@gnu.org>
 401
 402         * configure.in: Reorder so that most tests are done after CPPFLAGS
 403         is set from the C_SWITCH_... definitions.
 404
 405 2000-07-10  Gerd Moellmann  <gerd@gnu.org>
 406
 407         * configure.in (HAVE_XPM): Undo previous change.  Check for
 408         preprocessor define XpmReturnAllocPixels.
 409
 410 2000-07-06  Gerd Moellmann  <gerd@gnu.org>
 411
 412         * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
 413         instead of XpmReadFileToPixmap.
 414
 415 2000-07-05  Ken Raeburn  <raeburn@gnu.org>
 416
 417         * configure.in: Check for <soundcard.h>.  Look for ossaudio
 418         library, and set LIBSOUND accordingly.
 419
 420 2000-07-05  Dave Love  <fx@gnu.org>
 421
 422         * configure.in: Use AC_HEADER_SYS_WAIT.
 423
 424 2000-07-05  Gerd Moellmann  <gerd@gnu.org>
 425
 426         * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
 427         lisp/Makefile.  Distribute lisp/Makefile.in instead of
 428         lisp/Makefile.
 429
 430 2000-06-30  Ken Raeburn  <raeburn@gnu.org>
 431
 432         * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
 433         while searching for image-handling libraries.
 434
 435 2000-06-26  Gerd Moellmann  <gerd@gnu.org>
 436
 437         * configure.in (--with-xim): New option.
 438
 439 2000-06-23  Dave Love  <fx@gnu.org>
 440
 441         * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
 442         for struct timezone and test how we can call gettimeofday.
 443         Check for OSF 5+.  Check for term.h.
 444
 445         * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
 446         version.
 447
 448 2000-06-23  Gerd Moellmann  <gerd@gnu.org>
 449
 450         * configure.in (HAVE_LIBXP): Change test for libXp.
 451
 452 2000-06-21  Dave Love  <fx@gnu.org>
 453
 454         * configure.in: Check for fcntl.h.  Use AC_FUNC_GETLOADAVG, not
 455         simple test for getloadavg and substitute GETLOADAVG_LIBS.
 456         Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
 457
 458 2000-06-19  Dave Love  <fx@gnu.org>
 459
 460         * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
 461         _XOPEN_SOURCE is defined.
 462
 463 2000-06-16  Gerd Moellmann  <gerd@gnu.org>
 464
 465         * Makefile.in (distclean): Also make distclean in lisp/.
 466
 467 2000-06-15  Eli Zaretskii  <eliz@is.elta.co.il>
 468
 469         * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
 470
 471 2000-06-15  Gerd Moellmann  <gerd@gnu.org>
 472
 473         * make-dist: Add --help and --snapshot options.
 474
 475 2000-06-14  Gerd Moellmann  <gerd@gnu.org>
 476
 477         * configure.in: Generate lisp/Makefile.
 478
 479         * configure.in: Add support for `*-lynxos*'.
 480         Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
 481         recommended by <Karen.Dorhamer@compaq.com> to fix problems
 482         on Tru64 UNIX v5.0.
 483
 484 2000-06-13  Ken Raeburn  <raeburn@gnu.org>
 485
 486         * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
 487         it's on a continuation line.
 488
 489 2000-06-02  Dave Love  <fx@gnu.org>
 490
 491         * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
 492         files.
 493
 494         * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
 495         Check for struct exception.  Use AC_SYS_LARGEFILE and move ftello
 496         test.
 497
 498         * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
 499         (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
 500
 501 2000-05-26  Gerd Moellmann  <gerd@gnu.org>
 502
 503         * configure.in: Add check for speed_t typedef.
 504
 505 2000-05-25  Ken Raeburn  <raeburn@gnu.org>
 506
 507         * Makefile.in (install-arch-dep): Install fns-*.el only if it
 508         exists; it won't in the CANNOT_DUMP case.
 509
 510 2000-05-25  Gerd Moellmann  <gerd@gnu.org>
 511
 512         * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
 513         On FreeBSD, the exit status is 1 if CDPATH is not set.
 514         (install-arch-indep): Install ebrowse.info.
 515
 516 2000-05-20  NIIBE Yutaka  <gniibe@mri.co.jp>
 517
 518         * configure.in: Check for grandpt and getpt.
 519
 520 2000-05-09  Dave Love  <fx@gnu.org>
 521
 522         * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
 523
 524 2000-05-05  Gerd Moellmann  <gerd@gnu.org>
 525
 526         * make-dist: Make a link for lib-src/grep-changelog.  Copy
 527         install-sh.
 528
 529 2000-05-01  Eli Zaretskii  <eliz@is.elta.co.il>
 530
 531         * config.bat: Identify the beginning of the cpp stuff in
 532         src/Makefile.in and lib-src/Makefile.in more accurately.
 533
 534 2000-04-27  Gerd Moellmann  <gerd@gnu.org>
 535
 536         * configure.in: Add support for `powerpc*-*-linux-gnu*'.
 537
 538 2000-04-19  Gerd Moellmann  <gerd@gnu.org>
 539
 540         * configure.in: Add support for `powerpc-*-netbsd*'.
 541
 542 2000-04-19  Dave Love  <fx@gnu.org>
 543
 544         * configure.in: Don't use AC_FUNC_GETLOADAVG.
 545
 546         * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
 547
 548 2000-04-16  Dave Love  <fx@gnu.org>
 549
 550         * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
 551
 552 2000-04-14  Dave Love  <fx@gnu.org>
 553
 554         * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
 555
 556         * aclocal.m4 (AC_FUNC_MKTIME): New.
 557
 558 2000-03-28  Ken Raeburn  <raeburn@gnu.org>
 559
 560         * configure.in: Line up "--help" output a little better.
 561
 562 2000-03-26  Gerd Moellmann  <gerd@gnu.org>
 563
 564         * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
 565         New targets.
 566         (bootstrap): Rewritten in terms of the new targets above.  Make
 567         info files, too.
 568
 569 2000-03-12  Gerd Moellmann  <gerd@gnu.org>
 570
 571         * config.guess, config.sub: Use the versions of the files from
 572         subversions.
 573
 574 2000-03-08  Dave Love  <fx@gnu.org>
 575
 576         * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
 577         AC_C_VOLATILE.  Define POINTER_TYPE.
 578
 579         * aclocal.m4: New file.
 580
 581 2000-03-02  Gerd Moellmann  <gerd@gnu.org>
 582
 583         * configure.in (machine): Add `mipsel-*-netbsd*' and
 584         `arm-*-netbsd*'.
 585
 586 2000-03-01  Gerd Moellmann  <gerd@gnu.org>
 587
 588         * configure.in (machine): Add support for `*-auspex-sunos*'.
 589
 590 2000-02-29  Gerd Moellmann  <gerd@gnu.org>
 591
 592         * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
 593
 594 2000-02-18  Dave Love  <fx@gnu.org>
 595
 596         * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
 597
 598 2000-02-18  Andreas Schwab  <schwab@suse.de>
 599
 600         * Makefile.in (install-arch-indep): Add eudc to list of installed
 601         info files.
 602
 603 2000-02-17  Ken Raeburn  <raeburn@gnu.org>
 604
 605         * configure.in: Include -lz and -ljpeg (if it's available) when
 606         testing for the tiff library.
 607
 608 2000-02-17  Gerd Moellmann  <gerd@gnu.org>
 609
 610         * configure.in: Remove LISP_FLOAT_TYPE.
 611
 612 2000-02-12  Dave Love  <fx@gnu.org>
 613
 614         * configure.in: Use AC_FUNC_VFORK.
 615
 616 2000-02-01  Gerd Moellmann  <gerd@gnu.org>
 617
 618         * make-dist: Various fixes for new development tree.
 619
 620         * leim-Makefile.in: New file.
 621
 622 2000-01-31  Gerd Moellmann  <gerd@gnu.org>
 623
 624         * Makefile.in (dist): Call ./make-dist.
 625
 626 2000-01-24  Dave Love  <fx@gnu.org>
 627
 628         * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
 629
 630 2000-01-18  Gerd Moellmann  <gerd@gnu.org>
 631
 632         * configure.in (HAVE_GIF): Check for DGifOpen instead of
 633         DGifOpenFileName.
 634
 635 2000-01-11  Andreas Schwab  <schwab@suse.de>
 636
 637         * Makefile.in (install-arch-indep): Update list of info files to
 638         be installed.
 639
 640 2000-01-05  Dave Love  <fx@gnu.org>
 641
 642         * configure.in: Check for jerror.h as well as libjpeg.
 643
 644 2000-01-03  Andreas Schwab  <schwab@suse.de>
 645
 646         * Makefile.in (install-arch-indep): Install autotype*.  Run
 647         install-info on autotype and emacs-faq.info.
 648
 649 1999-12-04  Dave Love  <fx@gnu.org>
 650
 651         * Makefile.in: (install-arch-indep): Depend on `info'.
 652         (install-strip): Use `install' as sub-make target.
 653
 654 1999-11-23  Ken Raeburn  <raeburn@gnu.org>
 655
 656         * configure.in: Restore Kerberos code deleted on 1999-05-29 that
 657         didn't need to be deleted.  Check for the k5crypto library as well
 658         as the crypto library; MIT Kerberos 1.1 changed the name.
 659
 660 1999-11-18  Dave Love  <fx@gnu.org>
 661
 662         * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
 663
 664 1999-11-11  Erik Naggum  <erik@naggum.no>
 665
 666         * configure.in (bitmapdir): Allow for both "bitmaps" directories.
 667
 668 1999-11-08  Dave Love  <fx@gnu.org>
 669
 670         * configure.in: Fix change for --with-pop default.
 671
 672 1999-11-04  Dave Love  <fx@gnu.org>
 673
 674         * configure.in: Default to --with-pop.  Change sense of with-gcc
 675         and with-toolkit-scroll-bars messages to reflect the defaults.
 676
 677 1999-11-01  Gerd Moellmann  <gerd@gnu.org>
 678
 679         * INSTALL: Mention the Emacs Lisp Reference.
 680
 681 1999-10-27  Noah Friedman  <friedman@splode.com>
 682
 683         * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
 684
 685 1999-10-23  Gerd Moellmann  <gerd@gnu.org>
 686
 687         * Makefile.in (bootstrap): New target.
 688
 689 1999-10-19  Paul Eggert  <eggert@twinsun.com>
 690
 691         Add support for large files.  Merge glibc 2.1.2.
 692
 693         * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
 694         (HAVE_TM_GMTOFF): New symbol.
 695         (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
 696         mbrlen, strsignal.
 697         (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
 698
 699 1999-10-09  Stefan Monnier  <monnier@cs.yale.edu>
 700
 701         * make-dist (dontcompile): look for the DONTCOMPILE variable rather
 702           than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
 703
 704 1999-10-09  Richard M. Stallman  <rms@gnu.org>
 705
 706         * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
 707         Unset CDPATH to prevent cd from generating output.
 708
 709 1999-10-08  Stefan Monnier  <monnier@cs.yale.edu>
 710
 711         * update-subdirs: also ignore CVS subdirs.
 712
 713 1999-10-07  Gerd Moellmann  <gerd@gnu.org>
 714
 715         * Makefile.in (install-arch-indep): Add ada-mode.
 716
 717 1999-10-06  Dave Love  <fx@gnu.org>
 718
 719         * Makefile.in: Add rules for config.status, configure.
 720
 721 1999-09-07  Gerd Moellmann  <gerd@gnu.org>
 722
 723         * configure.in (--with-sound): Removed.
 724
 725 1999-08-30  Gerd Moellmann  <gerd@gnu.org>
 726
 727         * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
 728         the test for Xaw3d.
 729         (HAVE_TIFF): Add -lm to library check.
 730
 731 1999-08-28  Richard Stallman  <rms@gnu.org>
 732
 733         * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
 734         -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
 735         after the other X-related libraries.
 736
 737 1999-08-21  Dave Love  <fx@gnu.org>
 738
 739         * configure.in: Don't check for jpeglib.h.
 740
 741 1999-08-20  Gerd Moellmann  <gerd@gnu.org>
 742
 743         * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
 744         (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
 745
 746 1999-08-18  Dave Love  <fx@gnu.org>
 747
 748         * configure.in: : Check for termcap.h.
 749
 750 1999-08-15  Gerd Moellmann  <gerd@gnu.org>
 751
 752         * configure.in: Add --with-toolkit-scroll-bars.  If "no",
 753         use Emacs' scroll bars, even if configured for Motif or when
 754         Xaw3d is available.
 755
 756 1999-08-12  Wolfgang Rupprecht  <wolfgang@wsrcc.com>
 757
 758         * configure.in: Check for getaddrinfo.
 759
 760 1999-08-04  Eli Zaretskii  <eliz@gnu.org>
 761
 762         * config.bat: Make --no-debug work again by removing -gcoff.
 763
 764 1999-07-30  Dave Love  <fx@gnu.org>
 765
 766         * configure.in: Check for stdlib.h.
 767
 768 1999-07-19  Dave Love  <fx@gnu.org>
 769
 770         * configure.in: Grok sparc64-*-linux-gnu*.
 771
 772 1999-07-12  Richard Stallman  <rms@gnu.org>
 773
 774         * Version 20.4 released.
 775
 776 1999-06-23  Karl Heuer  <kwzh@gnu.org>
 777
 778         * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
 779         Quote $EMACS, in case it's a program with args.
 780
 781 1999-05-29  Richard M. Stallman  <rms@gnu.org>
 782
 783         * configure.in: Delete the Kerberos stuff.
 784
 785 1999-05-27  Greg Hudson  <ghudson@mit.edu>
 786
 787         * configure.in: Prefer kerberos 5 names.
 788
 789 1999-04-26  Richard M. Stallman  <rms@gnu.org>
 790
 791         * configure.in: Check for libXp.
 792
 793 1999-04-08  Richard Stallman  <rms@gnu.org>
 794
 795         * make-dist: Include change logs in subdirs of `lisp'.
 796
 797 1999-04-05  Richard Stallman  <rms@gnu.org>
 798
 799         * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
 800         (install-arch-indep): Make ${datadir}/emacs world-readable.
 801
 802 1999-03-30  Eli Zaretskii  <eliz@gnu.org>
 803
 804         * config.bat: Use epaths.* instead of paths.*.
 805
 806 1999-03-07  Eli Zaretskii  <eliz@gnu.org>
 807
 808         * INSTALL: Add detailed instructions to unpack and install
 809         intlfonts on MS-DOS.
 810
 811 1999-02-26  Richard Stallman  <rms@gnu.org>
 812
 813         * configure.in: Use epaths.h and epaths-force instead of paths....
 814
 815         * Makefile.in (epaths-force): Renamed from paths-force;
 816         operate on epaths.in and produce epaths.h.
 817
 818 1999-02-24  Richard Stallman  <rms@gnu.org>
 819
 820         * make-dist: Fix nt/icons directory handling.
 821
 822 1999-02-22  Simon Josefsson  <jas@pdc.kth.se>
 823
 824         * configure.in (f301-fujitsu-uxpv4.1): New target.
 825
 826 1999-02-20  Richard Stallman  <rms@gnu.org>
 827
 828         * make-dist (tempparent): Fix command to update info files.
 829
 830 1999-02-09  Richard Stallman  <rms@gnu.org>
 831
 832         * configure.in (powerpc-apple-netbsd*): New alternative.
 833
 834 1999-01-25  Geoff Voelker  <voelker@cs.washington.edu>
 835
 836         * make-dist: Include the new directory nt/icons in distributions.
 837
 838 1999-01-19  Richard Stallman  <rms@psilocin.ai.mit.edu>
 839
 840         * configure.in: Change message about HAVE_XFREE386.
 841
 842 1999-01-07  Eli Zaretskii  <eliz@gnu.org>
 843
 844         * config.bat: Support configuring with leim.
 845
 846 1998-12-16  Petri Kaurinkoski  <Petri.Kaurinkoski@hut.fi>
 847
 848         * configure.in (mips-sgi-irix6.5): New target.
 849
 850 1998-12-16  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
 851
 852         * configure.in: Remove GSS-API support, since it has been removed
 853         from movemail.
 854
 855 1998-12-04  Markus Rost  <rost@delysid.gnu.org>
 856
 857         * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
 858
 859 1998-12-04  Andreas Schwab  <schwab@delysid.gnu.org>
 860
 861         * Makefile.in: Don't install customize info file.  Run
 862         install-info on viper info file.
 863
 864 1998-11-29  Richard Stallman  <rms@psilocin.ai.mit.edu>
 865
 866         * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
 867
 868 1998-11-16  Kenichi Handa  <handa@etl.go.jp>
 869
 870         * configure.in (*-*-bsdi4*): New target.
 871
 872 1998-11-13  Ehud Karni  <ehud@unix.simonwiesel.co.il>
 873
 874         * configure.in: Fix previous change.
 875
 876 1998-11-11  Richard Stallman  <rms@gnu.org>
 877
 878         * configure.in (aviion-intel): New machine.
 879
 880 1998-11-04  Kenichi Handa  <handa@etl.go.jp>
 881
 882         * configure.in (mips-nec-sysv4*): New target.
 883
 884 1998-11-03  Andreas Schwab  <schwab@delysid.gnu.org>
 885
 886         * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
 887         from lisp.
 888
 889 1998-10-31  Richard Stallman  <rms@psilocin.ai.mit.edu>
 890
 891         * make-dist: Don't include fns*.el in dist.
 892
 893 1998-10-30  Dave Love  <fx@gnu.org>
 894
 895         * configure.in: Don't mkdir cpp.
 896
 897 1998-10-30  Andreas Schwab  <schwab@delysid.gnu.org>
 898
 899         * Makefile.in (install-arch-dep): Install src/fns-*.el in
 900         ${archlibdir}.
 901
 902 1998-08-19  Richard Stallman  <rms@psilocin.ai.mit.edu>
 903
 904         * Version 20.3 released.
 905
 906 1998-07-30  Paul Eggert  <eggert@twinsun.com>
 907
 908         * Makefile.in (Makefile, src/Makefile, src/config.stamp)
 909         (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
 910         (lwlib/Makefile, leim/Makefile):
 911         Prepend $(srcdir)/ to rule dependencies outside this dir.
 912
 913 1998-06-30  Richard Stallman  <rms@psilocin.ai.mit.edu>
 914
 915         * configure.in: Use unset CDPATH instead of making it empty.
 916
 917 1998-06-20  Karl Heuer  <kwzh@gnu.org>
 918
 919         * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
 920
 921 1998-06-07  Richard Stallman  <rms@psilocin.ai.mit.edu>
 922
 923         * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
 924         and default.el.  Sort the results.
 925
 926 1998-05-31  Karl Heuer  <kwzh@gnu.org>
 927
 928         * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
 929         writable.
 930
 931 1998-05-14  Richard Stallman  <rms@psilocin.ai.mit.edu>
 932
 933         * Makefile.in (install-arch-indep):
 934         Don't alter site-lisp/subdirs.el if it exists.
 935
 936 1998-05-12  Richard Stallman  <rms@psilocin.ai.mit.edu>
 937
 938         * Makefile.in (install-arch-indep): Put `-' on commands to create
 939         subdirs.el in site-lisp dirs.
 940
 941 1998-05-07  Richard Stallman  <rms@psilocin.gnu.org>
 942
 943         * Makefile.in (install-arch-indep): Fix typo in previous change.
 944
 945 1998-05-06  Richard Stallman  <rms@psilocin.gnu.org>
 946
 947         * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
 948
 949 1998-04-28  Richard Stallman  <rms@psilocin.gnu.org>
 950
 951         * Makefile.in (mkdir): Create the site-lisp dirs.
 952         (install-arch-indep): Make site-lisp/subdirs files world-readable.
 953
 954 1998-04-26  Richard Stallman  <rms@psilocin.gnu.org>
 955
 956         * Makefile.in (INSTALL_INFO): New variable.
 957         (install-arch-indep): Don't replace the dir file if it already exists.
 958         Use the install-info program, via INSTALL_INFO, to add entries.
 959         Make the `info' subdir and the Info files world-readable.
 960
 961 1998-04-16  Eli Zaretskii  <eliz@delysid.gnu.org>
 962
 963         * config.bat: Make sure the environment is large enough to support
 964         all the "set foo=bar" commands.  Update pointers to DJGPP FTP
 965         sites.
 966
 967 1998-04-10  Karl Heuer  <kwzh@gnu.org>
 968
 969         * make-dist: Don't accept EMACS=t when testing for $EMACS set.
 970
 971 1998-04-06  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
 972
 973         * configure.in: Add --with-gssapi to specify GSS-API
 974         authentication support for movemail.
 975
 976 1998-04-02  Richard Stallman  <rms@psilocin.ai.mit.edu>
 977
 978         * Makefile.in (install-arch-indep): Fix previous change.
 979
 980 1998-03-30  Richard Stallman  <rms@psilocin.ai.mit.edu>
 981
 982         * Makefile.in (info): Run man in build dir, not srcdir.
 983
 984 1998-03-28  Richard Stallman  <rms@psilocin.ai.mit.edu>
 985
 986         * Makefile.in (install-arch-indep): Fix previous change.
 987
 988 1998-03-23  Kenichi Handa  <handa@etl.go.jp>
 989
 990         * Makefile.in (top_distclean): Check the existence of `lock'
 991         subdir.
 992
 993 1998-03-22  Richard Stallman  <rms@gnu.org>
 994
 995         * Makefile.in (install-arch-indep): Put special subdirs.el files
 996         in site-lisp dirs.  Use normal-top-level-add-subdirs-to-load-path.
 997
 998 1998-03-21  Richard Stallman  <rms@psilocin.gnu.org>
 999
1000         * make-dist: Fix shell syntax in check for missing .el or .elc files.
1001
1002 1998-03-09  Richard Stallman  <rms@psilocin.gnu.org>
1003
1004         * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1005         (m68*-hp-hpux*): Handle versions 1X like 10.
1006
1007 1998-03-07  Richard Stallman  <rms@psilocin.gnu.org>
1008
1009         * make-dist: PROBLEMS is now in etc, not top level dir.
1010
1011         * Makefile.in (SOURCES): Delete PROBLEMS.
1012
1013 1998-02-25  Richard Stallman  <rms@gnu.org>
1014
1015         * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1016
1017         * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1018
1019 1998-01-17  Richard Stallman  <rms@gnu.org>
1020
1021         * Makefile.in (install-arch-indep): Add semicolon before `else'.
1022
1023 1998-01-02  Richard Stallman  <rms@psilocin.gnu.org>
1024
1025         * make-dist (tempparent): New option --no-check.
1026
1027         * make-dist: Don't do anything with cpp directory.
1028
1029 1997-12-20  Richard Stallman  <rms@psilocin.gnu.org>
1030
1031         * configure.in (sparc-fujitsu-sysv4*): New target.
1032
1033 1997-12-17  Andreas Schwab  <schwab@gnu.org>
1034
1035         * configure.in: Cache more tests.  Add missing quotes around
1036         message with embedded comma.
1037
1038 1997-12-04  Karl Heuer  <kwzh@gnu.org>
1039
1040         * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1041
1042 1997-11-26  Joel N. Weber II  <devnull@gnu.org>
1043
1044         * make-dist: Changed the comment about `umask 0' to say `Don't
1045         restrict access to any files.'; previously it said `Don't protect
1046         any files', which may have implied that we think fascism is good.
1047
1048 1997-11-24  Paul Eggert  <eggert@twinsun.com>
1049
1050         * configure.in (AC_CHECK_FUNCS): Add strftime.  The new GNU C library
1051         strftime needs the underlying host's strftime for locale dependent
1052         formats.
1053
1054 1997-11-20  Abraham Nahum  <miko@uxsrvc.tti.co.il>
1055
1056         * configure.in (i586-dg-dguxR4.*): New name in case branch.
1057
1058 1997-11-20  Eli Zaretskii  <eliz@is.elta.co.il>
1059
1060         * config.bat: Configure the man subdirectory.
1061
1062 1997-11-07  Paul Eggert  <eggert@twinsun.com>
1063
1064         * configure.in (AC_CHECK_LIB): Add -lintl.
1065
1066 1997-11-07  Karl Heuer  <kwzh@gnu.org>
1067
1068         * make-dist (check for .elc files): Avoid bash-specific syntax.
1069         (check for overflow 14-char limit): Simplify.
1070
1071 1997-11-07  Richard Stallman  <rms@gnu.org>
1072
1073         * Makefile.in (install): Move blessmail last.
1074
1075 1997-10-02  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1076
1077         * configure.in (gettimeofday, one arg or two):
1078         Clarify messages by avoiding double negative.
1079
1080 1997-09-30  Karl Eichwalder  <ke@suse.de>
1081
1082         * Makefile.in (install-arch-indep): install the widget info file.
1083
1084 1997-09-24  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
1085
1086         * configure.in (with-pop, with-kerberos): Need to check Kerberos
1087         libraries in reverse order, so that libraries will appear in the
1088         correct dependency order on the link line (and so that the
1089         configure checks themselves will work properly when early
1090         libraries depend on later ones).
1091
1092 1997-09-21  Erik Naggum  <erik@naggum.no>
1093
1094         * make-dist (making links to `src'): Keep timestamp on copied
1095         files.
1096
1097         * make-delta: New script to produce delta distributions.
1098
1099 1997-09-19  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1100
1101         * Version 20.2 released.
1102
1103 1997-09-15  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1104
1105         * Version 20.1 released.
1106
1107         * Makefile.in (install-leim): Depend on mkdir.
1108         (leim): Depend on src.
1109
1110 1997-09-13  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1111
1112         * configure.in: Recognize alpha* instead of just alpha.
1113
1114 1997-09-12  Paul Eggert  <eggert@twinsun.com>
1115
1116         * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1117
1118 1997-09-12  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1119
1120         * update-subdirs: Use rm -f.
1121
1122 1997-09-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1123
1124         * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1125         Ignore subdirs named Old.
1126
1127 1997-08-04  Kenneth Stailey  <kstailey@elbereth.disclosure.com>
1128
1129         * configure.in: Add OpenBSD clause to set $machine.
1130
1131 1997-09-04  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1132
1133         * make-dist: Recompile everything after updating various Lisp files.
1134         Recompile in leim as well as lisp.
1135         Check in leim as well as lisp for mismatched files and too-long names.
1136
1137 1997-09-03  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1138
1139         * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1140
1141 1997-08-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1142
1143         * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1144         before trying to copy anything from it.
1145
1146 1997-08-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1147
1148         * Makefile.in (man/Makefile): New target.
1149         (tags): Define env var EMACS and run Makefile from build dir.
1150
1151 1997-08-27  Eli Zaretskii  <eliz@psilocin.gnu.ai.mit.edu>
1152
1153         * config.bat: If src/_gdbinit doesn't exist, try using
1154         src/.gdbinit to create it (for building on Windows 95).
1155
1156 1997-08-25  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1157
1158         * Makefile.in (install-arch-indep):
1159         Discard extra data in tar | tar pipes.
1160
1161 1997-08-24  NIIBE Yutaka  <gniibe@mri.co.jp>
1162
1163         * configure.in (x_default_search_path): Corrected
1164         '${x_library}' to '${x_library}/X11'.
1165
1166 1997-08-22  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1167
1168         * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1169
1170 1997-08-22  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
1171
1172         * configure.in: Support auto-configuration of both Kerberos V4 and
1173         Kerberos V5 for movemail, including detection of V4 and V5 header
1174         files and libraries.
1175
1176 1997-08-16  NIIBE Yutaka  <gniibe@etl.go.jp>
1177
1178         * configure.in: Compute x_default_search_path
1179         and substitute into makefiles.
1180
1181         * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1182
1183 1997-08-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1184
1185         * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1186
1187 1997-08-07  Erik Naggum  <erik@naggum.no>
1188
1189         * configure.in: Remove lockdir, it is no longer needed.
1190         * Makefile.in (mkdir): Don't create lockdir.
1191         (lockdir): Variable deleted.
1192         (paths-force): Don't operate on PATH_LOCK.
1193
1194 1997-08-06  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1195
1196         * leim-Makefile.in (clean, distclean): New targets.
1197
1198         * make-dist: Include leim/ChangeLog in leim distribution.
1199
1200 1997-08-01  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1201
1202         * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1203
1204 1997-07-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1205
1206         * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1207
1208 1997-07-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1209
1210         * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1211
1212 1997-07-25  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1213
1214         * make-dist: Update leim/leim-list.el.
1215         Pass along value of $EMACS when updating lisp dir.
1216
1217 1997-07-25  Marcus G. Daniels  <marcus@cathcart.sysc.pdx.edu>
1218
1219         * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1220         prerequisite to the use of Doug Lea's malloc.
1221
1222 1997-07-21  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1223
1224         * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1225
1226         * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1227
1228 1997-07-16  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1229
1230         * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1231
1232 1997-07-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1233
1234         * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1235         to news-r6.h.
1236
1237 1997-07-10  Eli Zaretskii  <eliz@is.elta.co.il>
1238
1239         * config.bat: Use `sed' instead of `cp', which might not be
1240         installed.
1241
1242 1997-07-09  Kenichi Handa  <handa@etl.go.jp>
1243
1244         * Makefile.in (mostlyclean): Add cleaning leim directory.
1245         (clean, distclean, maintainer-clean): Likewise.
1246
1247 1997-07-09  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1248
1249         * make-dist (bogosities): Check subdirs of `lisp' also.
1250
1251 1997-07-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1252
1253         * make-dist (etc): Really avoid symlinks now.
1254         (lisp): Don't delete from subdirs the things we never copy.
1255
1256 1997-07-07  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
1257
1258         * Makefile.in (install-arch-indep): Correct the target name.
1259         The first letter `i' was dropped by the previous change of mine.
1260
1261 1997-07-06  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1262
1263         * configure.in (leim/Makefile): Generate this.
1264         (*-sysv4.2uw*): Recognize new alternative.
1265
1266         * leim-Makefile.in: Renamed from leim-Makefile.
1267
1268         * make-dist: Set up real-leim subdirectory,
1269         with the real contents of leim; then move it to
1270         a separate top-level directory.
1271
1272         * make-dist: Don't mention site-lisp, site-init, site-start
1273         or default, when listing files hat are not compiled and should be.
1274
1275         * configure.in: Create src/config.stamp at the end.
1276
1277 1997-07-04  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1278
1279         * Makefile.in (install-leim): Correct previous change.
1280
1281 1997-07-02  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
1282
1283         * Makefile.in (install-leim): New target.
1284         (install): Depend on install-leim.
1285
1286 1997-07-01  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
1287
1288         * Makefile.in (SUBDIR): Add leim.
1289         (SUBDIR_MAKEFILES): Add leim/Makefile.
1290         (leim/Makefile): New target.
1291
1292 1997-07-01  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1293
1294         * leim-Makefile: New file.
1295         * make-dist: Initialize a `leim' subdirectory with that makefile.
1296
1297 1997-06-29  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1298
1299         * configure.in (GNU_MALLOC_reason): Fix message text.
1300
1301 1997-06-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1302
1303         * make-dist (lisp): Don't process subdirs that start with =.
1304         (etc): Copy symlinks, as in src.
1305
1306 1997-06-26  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1307
1308         * configure.in (i*86-*-unixware*): New alternative.
1309
1310 1997-06-22  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1311
1312         * Makefile.in (src/config.stamp): Target renamed from src/config.h
1313         and touch it explicitly.
1314
1315         * configure.in (mips-sony-newsos6*): New alternative.
1316         (mips-*-linux-gnu*): New alternative.
1317         (*-*-bsdi*): New alternative.
1318         (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1319
1320 1997-06-22  Dave Love  <d.love@dl.ac.uk>
1321
1322         * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1323         movemail.o).
1324         (src/config.h): New target to re-configure if src/config.in
1325         is patched.
1326
1327 1997-06-18  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1328
1329         * configure.in (shutdown): Check for `shutdown' function.
1330
1331 1997-06-18  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
1332
1333         * update-subdirs: Include the directory "language" in subdirs.
1334
1335 1997-06-01  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1336
1337         * configure.in (m88k-dg-dgux4*): New alternative.
1338         (alpha-*-netbsd*): New alternative.
1339         (powerpcle-*-solaris2*): New alternative.
1340
1341 1997-05-20  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1342
1343         * make-dist: Warn about .el files that are not compiled.
1344
1345 1997-05-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1346
1347         * Makefile.in (dist): Don't run update-subdirs here,
1348         since make-dist now gets that done.
1349
1350         * make-dist: Use the new `updates' target in lisp/Makefile.
1351
1352         * make-dist: Use new non-file targets in lisp/Makefile.
1353
1354 1997-04-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1355
1356         * make-dist: Handle all subdirs of `lisp' uniformly.
1357         Don't handle `term' and `language' specially.
1358         Clear out umask at the beginning.
1359
1360 1997-04-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1361
1362         * make-dist: Use Make to update finder-inf.el and autoloads.
1363         Also update cus-load.el.
1364
1365 1997-04-09  Marcus G. Daniels  <marcus@cathcart.sysc.pdx.edu>
1366
1367         * configure.in (doug_lea_malloc):  First check for SYSTEM_MALLOC,
1368         in case it is desirable to disable the GNU malloc features with
1369         glibc.
1370
1371 1997-04-08  Marcus G. Daniels  <marcus@cathcart.sysc.pdx.edu>
1372
1373         * configure.in (DOUG_LEA_MALLOC):
1374         Define if malloc_{get,set}_state exist.
1375
1376 1997-03-05  Ken'ichi Handa  <handa@etl.go.jp>
1377
1378         * make-dist: Make links for files under lisp/language.
1379
1380 1997-02-20  Kenichi Handa <handa@etl.go.jp>
1381
1382         * update-subdirs: Exclude the directory "language" from subdirs.
1383
1384 1997-01-26  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1385
1386         * configure.in: Check for rint and cbrt.
1387
1388 1997-01-01  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1389
1390         * make-dist: Use $EMACS to say where to run Emacs.
1391         Add --no-update option.
1392
1393 1996-12-30  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1394
1395         * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1396
1397 1996-12-28  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1398
1399         * make-dist (copying src): Check thoroughly for symlinks
1400         and copy them in all cases.  Regularize the linking of *.in
1401         and *.opt and ChangeLog files.
1402         (copying lib-src): Likewise.
1403         Don't rm getdate.c or y.tab.*--they don't exist any more.
1404
1405 1996-12-18  Jonathan I. Kamens  <jik@annex-1-slip-jik.cam.ov.com>
1406
1407         * configure.in: Check for libmail, maillock.h and
1408         touchlock (for movemail).
1409
1410 1996-12-15  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1411
1412         * configure.in (limits.h): Check for this file.
1413
1414 1996-12-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1415
1416         * configure.in (rs6000-ibm-aix4.2): New alternative.
1417         (rs6000-ibm-aix4.0): New alternative.
1418         (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1419
1420 1996-11-22  Ben Harris  <bjh21@cam.ac.uk>
1421
1422         * configure.in: Recognize vax-*-netbsd*.
1423
1424 1996-11-06  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1425
1426         * configure.in (locallisppath): Add leim directory.
1427
1428 1996-10-31  Eli Zaretskii  <eliz@is.elta.co.il>
1429
1430         * config.bat: Make sure `mv' supports forward slashes and -f.
1431
1432 1996-10-28  Christian Limpach  <chris@nice.ch>
1433
1434         * configure.in (hppa*-next-nextstep*): * added after hppa
1435         to accept hppa1.0 and hppa1.1.
1436
1437 1996-10-05  Marcus G. Daniels  <marcus@coulee.tdb.com>
1438
1439         * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1440         * configure.in (ld_switch_machine): Fix typo.
1441
1442 1996-09-28  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1443
1444         * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1445         from config.h and use them in $ac_link.
1446
1447 1996-09-28  Erik Naggum  <erik@psilocin.gnu.ai.mit.edu>
1448
1449         * configure.in: Create a subdir named `lisp'.
1450
1451 1996-09-24  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1452
1453         * configure.in: Check for getcwd.
1454
1455 1996-09-04  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1456
1457         * configure.in: Check for termios.h.  Check for setpgid.
1458
1459 1996-08-31  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1460
1461         * configure.in: Check for setrlimit.
1462
1463 1996-08-31  Paul Eggert  <eggert@twinsun.com>
1464
1465         * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1466
1467 1996-08-28  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1468
1469         * configure.in: Check for utimes.
1470
1471         * configure.in: Check for com_err library, but only
1472         if --with-kerberos was used.  Check for krb and des
1473         only if --with-kerberos.
1474
1475 1996-08-26  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1476
1477         * Makefile.in (INSTALL_STRIP): New variable.
1478         (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1479         (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1480
1481 1996-08-25  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1482
1483         * configure.in: Check for krb and des libraries.
1484
1485 1996-08-24  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
1486
1487         * configure.in (*-sunos4.1.[3-9]*noshare):
1488         Use sunos413, not sunos4-1-3.
1489         (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1490         (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1491
1492 1996-08-22  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1493
1494         * Makefile.in (src/paths.h): Target deleted.
1495         (paths-force): Delete all dependencies on this target
1496         but don't delete the target.
1497         (install): Depend on `all'.
1498         (paths-force): Don't print a message.
1499
1500         * configure.in: Generate src/paths.h here.
1501
1502 1996-08-18  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1503
1504         * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1505         New variables that affect linking only.
1506         (alpha-dec-osf*): Use those instead of previous change.
1507
1508 1996-08-15  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1509
1510         * Makefile.in (install-arch-indep): Install info/messages.
1511
1512 1996-08-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1513
1514         * Version 19.33 released.
1515
1516 1996-08-10  Marcus Daniels  <marcus@sayre.sysc.pdx.edu>
1517
1518         * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1519         Fix previous change.
1520
1521 1996-08-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1522
1523         * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1524         New alternative.
1525
1526 1996-08-07  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1527
1528         * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1529         and NON_GCC_TEST_OPTIONS.
1530
1531 1996-08-06  Paul Eggert  <eggert@twinsun.com>
1532
1533         * configure.in (LOCALTIME_CACHE): Don't put a string literal
1534         "TZ=..." in environ.
1535
1536 1996-08-04  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1537
1538         * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1539
1540 1996-08-03  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1541
1542         * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1543         the more general *-sunos4.1.[3-9]* clause.
1544
1545 1996-07-31  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1546
1547         * Version 19.32 released.
1548
1549         * configure.in (*-sco3.2v5*):
1550         Set OVERRIDE_CPPFLAG to a string of one space.
1551         Fix the code that uses OVERRIDE_CPPFLAG.
1552
1553 1996-07-16  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1554
1555         * configure.in: Undo previous change.
1556
1557 1996-07-16  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1558
1559         * config.sub: Use `pc', not `unknown', when canonicalizing
1560         the vendor for ...86.
1561
1562 1996-07-15  David Mosberger-Tang <davidm@AZStarNet.com>
1563
1564         * configure.in: Check for termios.h header.
1565
1566 1996-07-11  Bill Mann  <dvmann@dvncr.praxisint.com>
1567
1568         * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1569
1570 1996-07-07  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1571
1572         * configure.in: Split bsdos2 and bsdos2-1.
1573
1574 1996-07-06  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1575
1576         * config.sub: If last two words are not a recognized
1577         KERNEL-OS pair, use just the last word as OS, as in 19.31.
1578         Make conversion of gnu/linux to linux-gnu really work.
1579
1580         * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1581
1582 1996-06-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1583
1584         * configure.in (check for using Lucid widgets by default):
1585         Eliminate indentation that confuses some compilers.
1586
1587 1996-06-29  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1588
1589         * config.sub: Convert linux and gnu/linux to linux-gnu.
1590
1591         * make-dist: Don't update getdate.c.
1592         Ignore =... files when checking for too-long Lisp file names.
1593
1594 1996-06-28  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1595
1596         * configure.in (euidaccess): Check for that, not for eaccess.
1597
1598 1996-06-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1599
1600         * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1601         before `noshare'.
1602         (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1603
1604 1996-06-21  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1605
1606         * configure.in: Rename lignux to linux-gnu in configuration names.
1607         Use gnu-linux as the opsys value (s/ file name).
1608         Allow i686 just like i386, i486, i586.
1609
1610 1996-06-20  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1611
1612         * configure.in (i*86-*-sco3.2v5): New alternative.
1613         (OVERRIDE_CPPFLAG): New variable.
1614         (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1615
1616         * configure.in: Specify vpath for .texi files.
1617
1618 1996-06-09  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1619
1620         * configure.in: Always check for HAVE_X11R5.
1621         Separately decide whether to use a toolkit by default.
1622
1623 1996-06-04  Bill Mann  <dvmann@dvhpux1.praxisint.com>
1624
1625         * configure.in: If X11R5 is missing the Xaw headers,
1626         default to --with-x-toolkit=no.
1627
1628 1996-05-31  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1629
1630         * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1631
1632 1996-05-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
1633
1634         * Makefile.in (install-arch-indep): If cd etc makes output,
1635         don't treat that as part of the tar data.
1636         Check that ./lisp actually exists.
1637
1638 1996-05-29  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1639
1640         * make-dist: Check for long file names.
1641
1642 1996-05-25  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1643
1644         * Version 19.31 released.
1645
1646 1996-05-25  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1647
1648         * configure.in: Recognize sparc-*-lignux.
1649
1650 1996-05-03  Richard Stallman  <rms@delasyd.gnu.ai.mit.edu>
1651
1652         * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1653         Don't include config.w95.
1654
1655 1996-04-21  Richard Stallman  <rms@delasyd.gnu.ai.mit.edu>
1656
1657         * make-dist: Replace --no-clean-up and --no-tar options
1658         with --clean-up and --tar, so that the default is useful.
1659
1660 1996-04-15  Eli Zaretskii  <eliz@is.elta.co.il>
1661
1662         * config.bat: Make sure the GDB init file is called src/_gdbinit;
1663         if not, tell the user to rename it and abort.
1664
1665 1996-04-14  Eli Zaretskii  <eliz@is.elta.co.il>
1666
1667         * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1668         test program.
1669
1670 1996-04-12  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1671
1672         * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1673
1674         * make-dist (MANIFEST): Fix previous change.
1675         (msdos): Put mainmake.v2 into the dist.
1676
1677 1996-04-10  Roland McGrath  <roland@charlie-brown.gnu.ai.mit.edu>
1678
1679         * make-dist: Exit if autoconf fails.
1680
1681 1996-04-10  Eli Zaretskii  <eliz@is.elta.co.il>
1682
1683         * config.bat: Set djgpp-ver, and unset it at the end.
1684         Add a number of conditionals for DJGPP version 2.
1685         Rename label libsrc2 to libsrc3.
1686         Substitute for LDFLAGS in src/Makefile.
1687         Substitute for ALL_CFLAGS in lib-src/Makefile.
1688
1689 1996-04-08  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1690
1691         * configure.in (ncurses): Check this after checking fns like strerror.
1692
1693 1996-04-08  Erik Naggum  <erik@naggum.no>
1694
1695         * make-dist (MANIFEST): Don't include lines from =files.
1696
1697 1996-04-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1698
1699         * make-dist: Don't put lisp/dired.todo in the dist.
1700
1701 1996-04-05  Richard Stallman  <rms@lucy.gnu.ai.mit.edu>
1702
1703         * configure.in (HAVE_NCURSES): Look for library named ncurses.
1704
1705         * configure.in (setlocale): Check for it.
1706
1707         * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1708
1709 1996-03-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1710
1711         * configure.in: Use lignux instead of linux as value of opsys.
1712
1713 1996-03-22  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1714
1715         * Makefile.in (install-strip): Fix whitespace.
1716         Get rid of continuation.
1717
1718         * config.sub: Convert linux or gnu/linux to lignux.
1719
1720 1996-03-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1721
1722         * configure.in: Accept lignux in configuration name.
1723
1724 1996-03-20  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1725
1726         * Makefile.in (install-strip): New target.
1727
1728 1996-03-18  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1729
1730         * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1731         -f failed to do the job on Suns.
1732
1733 1996-03-13  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1734
1735         * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1736
1737         * configure.in (linux/version.h): Check for this header.
1738
1739 1996-03-12  Roland McGrath  <roland@charlie-brown.gnu.ai.mit.edu>
1740
1741         * configure.in: Remove -fno-builtin hackery from -lm check.
1742
1743 1996-03-08  Roland McGrath  <roland@charlie-brown.gnu.ai.mit.edu>
1744
1745         * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1746         just this test.
1747
1748         * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1749
1750 1996-03-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1751
1752         * configure.in: Check for ncurses.
1753
1754 1996-02-28  Paul Eggert  <eggert@twinsun.com>
1755
1756         * configure.in (LOCALTIME_CACHE):
1757         Also define if localtime mishandles unsetting TZ.
1758         This works around a localtime bug in mips-dec-ultrix.
1759
1760 1996-02-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1761
1762         * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1763
1764         * configure.in: Improve messages about X versions.
1765
1766 1996-02-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1767
1768         * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1769
1770 1996-02-23  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1771
1772         * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1773         (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1774
1775         * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1776         (install): Put install-arch-indep before install-arch-dep.
1777
1778 1996-02-20  Dave Love  <d.love@dl.ac.uk>
1779
1780         * INSTALL: Clarify info about MS-DOS path handling.
1781
1782 1996-02-12  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1783
1784         * Makefile.in (install-arch-indep): Install info/ccmode*.
1785         In previous change, protect against /bin/pwd returning null string.
1786
1787 1996-02-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1788
1789         * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1790         to lispdir.
1791
1792 1996-02-01  Paul Eggert  <eggert@twinsun.com>
1793
1794         * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1795
1796 1996-01-30  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1797
1798         * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1799
1800 1996-01-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1801
1802         * Makefile.in (extraclean): Use ${top_distclean} to ensure
1803         we delete everything distclean deletes.
1804
1805 1996-01-23  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1806
1807         * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1808
1809 1996-01-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1810
1811         * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1812         into LDFLAGS instead of into LIBS.
1813
1814 1996-01-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1815
1816         * configure.in (HAVE_XMU): Fix typo in previous change.
1817
1818 1996-01-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1819
1820         * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1821
1822 1996-01-10  Erik Naggum  <erik@naggum.no>
1823
1824         * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1825
1826 1996-01-10  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1827
1828         * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1829
1830 1996-01-10  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1831
1832         * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1833         and use -lXt to link it.
1834
1835 1996-01-08  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1836
1837         * configure.in (locallisppath): Put version-specific dir first.
1838
1839 1996-01-07  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1840
1841         * configure.in (hppa-*-nextstep*): New alternative.
1842         (USE_X_TOOLKIT): By default, set this to "maybe";
1843         and change that later to LUCID or "no" according to X11 version.
1844
1845         * make-dist: Recompile outdated .elc files and update all autoloads.
1846
1847 1996-01-05  Roland McGrath  <roland@churchy.gnu.ai.mit.edu>
1848
1849         * configure.in (locallisppath): Fix typo in last change: " -> '.
1850
1851 1996-01-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1852
1853         * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1854
1855 1995-12-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1856
1857         * Makefile.in (install-arch-indep): Give all files read permission.
1858
1859 1995-12-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1860
1861         * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1862         If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1863
1864 1995-12-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1865
1866         * configure.in: Determine HAVE_X11R6.
1867         (HAVE_MENUS): Renamed from HAVE_X_MENU.
1868
1869 1995-12-21  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1870
1871         * configure.in: Just "solaris" now defaults to version 2.4.
1872         Add sunos4.1.n-noshare as alternative.
1873
1874 1995-12-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1875
1876         * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1877
1878 1995-11-29  Erik Naggum  <erik@naggum.no>
1879
1880         * Makefile.in (install-arch-indep): Add missing backslash.
1881
1882 1995-11-29  Karl Eichwalder  <ke@ke.Central.DE>
1883
1884         * Makefile.in (install-arch-indep): Don't install
1885         lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1886
1887 1995-11-29  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1888
1889         * Makefile.in (install-arch-indep): Fix previous change.
1890
1891         * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1892
1893 1995-11-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1894
1895         * Version 19.30 released.
1896
1897         * make-dist (lisp): Exclude subdirs.el.
1898
1899 1995-11-22  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1900
1901         * make-dist (etc): Delete *.orig and *.rej.
1902
1903 1995-11-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1904
1905         * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1906
1907 1995-11-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1908
1909         * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1910
1911 1995-11-14  Geoff Voelker  <voelker@cs.washington.edu>
1912
1913         * make-dist (nt): Rename install, readme, and todo to
1914         INSTALL, README, and TODO.
1915
1916 1995-11-10  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1917
1918         * make-dist (lisp): Don't distribute site-start.
1919
1920 1995-11-06  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1921
1922         * make-dist: Break the hard link on alloca.c.
1923
1924 1995-11-04  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
1925
1926         * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1927
1928 1995-11-02  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
1929
1930         * make-dist (src, lib-src): Don't distribute Makefile.c.
1931         (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1932
1933 1995-10-31  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1934
1935         * Makefile.in (mkdir): Create man1dir, not mandir.
1936         (uninstall): Use man1dir, not mandir.
1937
1938 1995-10-30  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1939
1940         * Makefile.in (man1dir): New variable.
1941         (install-arch-indep): Use man1dir.
1942
1943         * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1944
1945         * make-dist: Create lisp/MANIFEST.
1946
1947 1995-10-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1948
1949         * configure.in (m68k-*-linux*): New alternative.
1950
1951 1995-10-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1952
1953         * make-dist: Use new names config.in, paths.in, and
1954         {src,lib-src}/Makefile.in.
1955
1956 1995-10-25  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
1957
1958         * configure.in: Don't bother checking for drem.
1959
1960 1995-10-20  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1961
1962         * Makefile.in (distclean): Delete line with just a tab in it.
1963         (install-arch-indep): Delete spaces that precede tabs.
1964         Delete spurious `fi' left from previous change.
1965         (install): Supply `true' as command, to avoid null command.
1966
1967 1995-10-05  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1968
1969         * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
1970
1971 1995-09-30  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1972
1973         * configure.in (powerpc-*-solaris2): New alternative.x
1974
1975 1995-09-12  Karl Heuer  <kwzh@gnu.ai.mit.edu>
1976
1977         * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
1978         of paths.h.tmp$$, to avoid going beyond 14 characters.
1979
1980 1995-09-10  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1981
1982         * configure.in: Improve error msg for invalid --with-x-toolkit value.
1983
1984 1995-09-06  Paul Eggert  <eggert@twinsun.com>
1985
1986         * configure.in (LOCALTIME_CACHE): Define if tzset exists and
1987         if localtime caches TZ.  Check for tzset.
1988
1989 1995-09-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1990
1991         * config.bat: Simplify using new names file names src/makefile.in,
1992         config.in, paths.in.  Change Echo commands not to use `.
1993
1994 1995-08-31  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
1995
1996         * Makefile.in (install-arch-indep): Always install the new dir file;
1997         rename the previous dir file to dir.bak or dir.old.
1998
1999 1995-08-14  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2000
2001         * configure.in (RANLIB): Substitute this into makefiles.
2002         Set it specially on solaris; set it by default on other systems.
2003
2004         * configure.in: Fix previous Alpha change.
2005
2006 1995-08-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2007
2008         * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2009         NON_GCC_TEST_OPTIONS.
2010
2011 1995-08-10  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2012
2013         * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2014         from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2015
2016         * configure.in (alpha-*-linux*): New configuration.
2017
2018 1995-08-05  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2019
2020         * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2021         (m68k-next-nextstep*): New alias for that.
2022         (i*86-*-nextstep*): Use nextstep.h.
2023         (sparc-*-nextstep*): New configuration.
2024
2025 1995-08-02  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2026
2027         * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2028         And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2029
2030 1995-07-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2031
2032         * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2033         Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2034
2035 1995-07-18  Mike Long  <mike.long@analog.com>
2036
2037         * make-dist: Fix update of finder-inf.el, and byte-compile it.
2038
2039 1995-07-18  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2040
2041         * Makefile.in (src/paths.h, paths-force):
2042         Rename src/paths.h.in to src/paths.in.
2043         (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2044
2045         * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2046         Use Makefile.c for intermediate file.
2047         Rename src/config.h.in to src/config.in.
2048
2049 1995-07-17  Richard Stallman  <rms@gnu.ai.mit.edu>
2050
2051         * configure.in (mips-dec-ultrix*): Assume version 4.3.
2052         (mips-dec-ultrix4.[12]): New alternative for old versions.
2053
2054 1995-07-06  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2055
2056         * make-dist: Don't break intra-tree links.
2057
2058 1995-07-06  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
2059
2060         * configure.in: Put back archlibdir initialization.  Require
2061         autoconf 2.4.1 or later.
2062
2063 1995-07-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2064
2065         * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2066         (mips-mips-riscos5*): New alternative.
2067
2068 1995-06-29  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2069
2070         * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2071
2072 1995-06-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2073
2074         * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2075         (mandir, infodir, archlibdir): Initializations deleted.
2076
2077         * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2078         On hpux9shr, use hpux9shxr4.h.
2079
2080 1995-06-24  Morten Welinder  <terra+@cs.cmu.edu>
2081
2082         * configure.in: Added target mips-dec-mach_bsd4.3.
2083         * config.guess: Guess mips-dec-mach_bsd4.3.
2084
2085 1995-06-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2086
2087         * Makefile.in (mkdir): Use symbolic chmod.
2088
2089 1995-06-22  Paul Eggert  <eggert@twinsun.com>
2090
2091         * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2092         (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2093
2094 1995-06-22  Paul Eggert  <eggert@twinsun.com>
2095
2096         * Makefile.in (SUBDIR_MAKEFILES):
2097         Add man/Makefile, so `make distclean' removes it.
2098         (top_distclean): Add config.log to the list of files to be removed.
2099
2100 1995-06-19  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2101
2102         * Version 19.29 released.
2103
2104 1995-06-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2105
2106         * configure.in: Fix the previous change to verify that the -b
2107         option really solves the problem.
2108
2109         * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2110
2111 1995-06-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2112
2113         * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2114
2115 1995-06-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2116
2117         * configure.in: Report more clearly when there is no special
2118         dir to search for X includes or libraries.
2119
2120 1995-06-13  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2121
2122         * configure.in: Check for -lpthreads, not -lpthread.
2123
2124 1995-06-09  Geoff Voelker  <voelker@cs.washington.edu>
2125
2126         * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2127
2128 1995-06-08  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2129
2130         * configure.in: Check for -lpthread.
2131
2132 1995-06-05  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2133
2134         * Makefile.in (install-arch-indep): Install info files for mh-e.
2135         (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2136
2137 1995-06-01  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2138
2139         * configure.in (*-solaris2.5): New configuration.
2140
2141         * make-dist: Copy new files config.nt and config.w95.
2142
2143 1995-05-30  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2144
2145         * configure.in: Use x_includes, not x_libraries, for -I.
2146         Make bitmapdir a colon-separated list.
2147
2148 1995-05-27  Richard Stallman  <rms@gnu.ai.mit.edu>
2149
2150         * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2151
2152         * configure.in: Allow x_libraries and x_includes to be paths.
2153
2154 1995-05-25  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2155
2156         * configure.in: Fix typo.
2157
2158 1995-05-24  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
2159
2160         * INSTALL: Clarify use of site-init.el.
2161
2162 1995-05-22  enami tsugutomo  <enami@sys.ptg.sony.co.jp>
2163
2164         * configure.in: pass arg to sqrt.
2165
2166 1995-05-18  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
2167
2168         * make-dist: Fix May 6 change.
2169
2170 1995-05-17  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2171
2172         * vpath.sed: Delete reference to ymakefile.
2173
2174 1995-05-09  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
2175
2176         * configure.in: Use sqrt (more portable) instead of fmod in -lm
2177         check.
2178
2179 1995-05-09  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2180
2181         * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2182
2183         * update-subdirs: Specify /bin/sh to run the script.
2184
2185 1995-05-06  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2186
2187         * make-dist: Put src/makefile.nt in dist.
2188
2189         * configure.in (i[345]86-*-bsdi2*): New configuration.
2190         (vax-dec-bsd386*): Deleted.
2191
2192 1995-05-06  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
2193
2194         * configure.in: Make sure CDPATH doesn't mess up PWD check.  Check
2195         whether X bitmaps are in X11/bitmaps instead of bitmaps.  Use fmod
2196         instead of logb in -lm check.
2197
2198 1995-05-03  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2199
2200         * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2201         Use bsd4-3.  Don't set NON_GNU_CPP.
2202
2203         * make-dist: Don't copy in src/s/*.inp.  Don't copy nt/src.
2204         In nt. copy various different things, but not *.cmd.
2205         Fix the ln commands for the subdirs of nt.
2206
2207 1995-04-29  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2208
2209         * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2210
2211 1995-04-27  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2212
2213         * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2214         since that's what the header file expects.
2215
2216 1995-04-24  Francesco Potorti`  (pot@cnuce.cnr.it)
2217
2218         * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2219         and 68040 based machines when choosing options for gnucc.
2220
2221 1995-04-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2222
2223         * Makefile.in (top_distclean): Delete config.cache.
2224
2225 1995-04-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2226
2227         * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2228
2229         * configure.in: Use m/ncr386.h.
2230
2231 1995-04-06  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2232
2233         * Makefile.in (install-arch-indep): Undo Sep 23 change.
2234
2235 1995-04-06  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2236
2237         * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2238         (man): Don't copy texindex.c and getopt.c; they're deleted.
2239         (etc): Omit `e'; it's a subdirectory.
2240         (etc/e): Use `../..', not `..', to reference top level.
2241
2242 1995-04-06  Simon Leinen  <simon@lia.di.epfl.ch>
2243
2244         * Makefile.in (install-arch-indep, dist):
2245         look for `update-subdir' in $(srcdir).
2246
2247 1995-04-06  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2248
2249         * make-dist: Include mkinstalldirs in distribution.
2250
2251 1995-04-05  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
2252
2253         * make-dist: Add missing close backquote.
2254
2255 1995-04-02  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2256
2257         * make-dist: Don't distribute shortnames directory.
2258
2259 1995-03-12  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2260
2261         * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2262
2263 1995-02-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2264
2265         * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2266
2267 1995-02-23  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2268
2269         * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2270
2271 1995-02-13  Richard Stallman  <rms@pogo.gnu.ai.mit.edu>
2272
2273         * configure.in (mips-sgi-irix6): New configuration.
2274
2275 1995-02-07  Richard Stallman  <rms@pogo.gnu.ai.mit.edu>
2276
2277         * Makefile.in (maintainer-clean): Renamed from realclean.
2278
2279 1995-02-02  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
2280
2281         * configure.in: Create a .gdbinit that sources the real one, if
2282         using a different build directory.
2283
2284 1995-01-23  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
2285
2286         * configure.in: Check for sys/select.h.
2287
2288 1995-01-02  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2289
2290         * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2291
2292 1994-12-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2293
2294         * configure.in: Handle isc 4.1 operating system.
2295
2296 1994-12-10  Richard Stallman  <rms@kepa>
2297
2298         * configure.in (rs6000-ibm-aix4.1*): New alternative.
2299         (rs6000-ibm-aix4*): New alternative.
2300
2301 1994-12-06  Richard Stallman  <rms@kepa>
2302
2303         * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2304
2305 1994-11-30  David J. MacKenzie  <djm@duality.gnu.ai.mit.edu>
2306
2307         * configure.in: Don't try to make directories that are guaranteed
2308         to already exist.
2309
2310 1994-11-23  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2311
2312         * configure.in: Generate man/Makefile from man/Makefile.in.
2313         Create the man subdir.
2314
2315         * Makefile.in (dvi): Run Make in our man subdir.
2316
2317         * make-dist: Create subdir etc/e.
2318         Make links to it.
2319         Put man/Makefile.in in dist, instead of man/Makefile.
2320
2321 1994-11-21  David J. MacKenzie  (djm@mole.gnu.ai.mit.edu)
2322
2323         * configure.in: Add --with-pop, --with-kerberos, and
2324         --with-hesiod for movemail.
2325
2326 1994-11-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2327
2328         * configure.in (m68*-apollo*): Use s/domain.h.
2329
2330 1994-11-14  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2331
2332         * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2333
2334 1994-11-14  David J. MacKenzie  (djm@geech.gnu.ai.mit.edu)
2335
2336         * configure.in: Don't add -I, -L, -R options for cc if their
2337         arguments would be empty.
2338
2339 1994-11-11  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2340
2341         * configure.in (i860-intel-osf1*): New alternative.
2342         (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2343         (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2344
2345 1994-11-09  David J. MacKenzie  <djm@duality.gnu.ai.mit.edu>
2346
2347         * configure.in: Make h_errno check not use nested functions.
2348
2349 1994-11-09  Richard Stallman  <rms@pogo.gnu.ai.mit.edu>
2350
2351         * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2352
2353 1994-11-08  Roland McGrath  <roland@churchy.gnu.ai.mit.edu>
2354
2355         * Makefile.in (install-arch-indep): Avoid continued comment
2356         swallowing target line.
2357
2358 1994-11-08  David J. MacKenzie  (djm@churchy.gnu.ai.mit.edu)
2359
2360         * configure.in: Protect a character class with `changequote'.
2361
2362 1994-11-07  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
2363
2364         * configure.in: Accept `news' as a synonym for `newsos'.
2365
2366 1994-11-03  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
2367
2368         * Makefile.in: Don't rm files if cd fails.
2369
2370 1994-11-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2371
2372         * make-dist: Put nt subdir and its subdirs in the dist.
2373         (lib-src): Put makefile.nt in the dist.
2374         (lisp): Put makefile.nt in the dist.
2375
2376 1994-10-29  David J. MacKenzie  (djm@geech.gnu.ai.mit.edu)
2377
2378         * configure.in: Change a stray `[' to `test'.
2379
2380 1994-10-28  David J. MacKenzie  <djm@duality.gnu.ai.mit.edu>
2381
2382         * configure.in: Adapt for Autoconf v2.  Use the standard argument
2383         parser, host type canonicalizer, X11 finder, and message
2384         printing macros.  Use the new macro names.  Use `test' instead of `['.
2385
2386 1994-10-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2387
2388         * configure.in: Check for getpagesize.
2389
2390 1994-10-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2391
2392         * make-dist (msdos): Put sed* in the distribution.
2393
2394 1994-10-17  Morten Welinder  <terra@mole.gnu.ai.mit.edu>
2395
2396         * config.bat: New option, `--with-x', for configuring Emacs
2397         for use with the X11 system DesqView/X.
2398         New option, `--no-debug', for compiling Emacs without debug
2399         information thus saving disk space.
2400         (src/config.h, src/paths.h): Use `update' (which is like
2401         `move-if-changed') to change the file.
2402         (src/config.h): When configuring for X11 perform extra changes.
2403         (src/makefile): When configuring for X11 perform extra changes.
2404         (lib-src): Remove temporary files.
2405         (): Check that `sed', `rm', `mv', and `gcc' are available.
2406
2407 1994-10-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2408
2409         * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2410
2411         * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2412
2413 1994-10-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2414
2415         * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2416
2417         * configure.in (canonical): Substitute var into makefiles.
2418         (bitmapdir): Likewise.
2419
2420         * Makefile.in (bitmapdir): New variable.
2421         (src/paths.h, paths-force): Edit PATH_BITMAPS.
2422
2423 1994-10-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2424
2425         * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2426
2427         * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2428         * update-subdirs: New shell script.
2429
2430 1994-10-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2431
2432         * Makefile.in (top_distclean): Don't rm build-install.
2433         (SOURCES): Delete build-install.in.
2434
2435         * make-dist: Don't distribute build-ins.in.
2436         * build-ins.in: File deleted.
2437
2438 1994-10-12  David J. MacKenzie  (djm@duality.gnu.ai.mit.edu)
2439
2440         * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2441
2442 1994-10-11  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2443
2444         * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2445
2446         * configure.in (libexecdir): Renamed from libdir.  New default.
2447         (sharedstatedir): Renamed from statedir.  New default.
2448         (datadir): New default.
2449
2450         * make-dist: Don't distribute subdirs.el.
2451
2452 1994-10-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2453
2454         * configure.in (eaccess): Check for it.
2455
2456 1994-10-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2457
2458         * configure.in (mktime): Check for it.
2459
2460 1994-10-02  Paul Reilly  <pmr@geech.gnu.ai.mit.edu>
2461
2462         * configure.in (motif): Add support for usage and option checking.
2463
2464 1994-09-24  Richard Stallman  <rms@churchy.gnu.ai.mit.edu>
2465
2466         * configure.in (utimes): Check for it.
2467
2468 1994-09-23  Richard Stallman  <rms@churchy.gnu.ai.mit.edu>
2469
2470         * Makefile.in (install-arch-indep): Don't do mkdir here.
2471
2472 1994-09-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2473
2474         * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2475         riscix.h renamed to acorn.h.
2476
2477 1994-09-21  Michael Ben-Gershon (mybg@cs.huji.ac.il)
2478
2479         * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2480         New configurations.
2481
2482 1994-09-21  David J. MacKenzie  (djm@geech.gnu.ai.mit.edu)
2483
2484         * configure.in: Remove trailing slashes from srcdir.
2485
2486 1994-09-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2487
2488         * configure.in (i[345]86-sequent-ptx*): Handle
2489
2490 1994-09-20  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2491
2492         * Makefile.in (paths-force): Depend on src/paths.h
2493
2494 1994-09-19  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
2495
2496         * configure.in (config_options): Save all arguments, not just some.
2497
2498 1994-09-18  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
2499
2500         * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2501
2502         * configure.in: Add AC_AIX.
2503         Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2504
2505 1994-09-18  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2506
2507         * configure.in (parsing options): Simplify sed command to delete -'s.
2508
2509 1994-09-16  Karl Heuer  <kwzh@churchy.gnu.ai.mit.edu>
2510
2511         * configure.in (config_options): New shell variable.
2512         Pass its value to C code in EMACS_CONFIG_OPTIONS.
2513
2514 1994-09-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2515
2516         * configure.in (alpha-dec-osf*): New target.
2517
2518         * Makefile.in: Use just one FRC target.
2519
2520 1994-09-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2521
2522         * Makefile.in (removenullpaths, paths-force):
2523         Use name paths.h.tmp$$, which depends on the pid.
2524
2525 1994-09-14  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2526
2527         * Makefile.in (removenullpaths, paths-force):
2528         Put paths.h.tmp in top-level dir, not in src.
2529
2530 1994-09-11  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2531
2532         * Version 19.27 released.
2533
2534 1994-09-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2535
2536         * Version 19.26 released.
2537
2538 1994-09-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2539
2540         * configure.in: Check for lrand48, not rand48.
2541
2542 1994-09-03  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2543
2544         * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2545         (powerpc-ibm-aix*): New aliases.
2546
2547 1994-08-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2548
2549         * make-dist (src/m, src/s): Put *.inp in distribution.
2550
2551 1994-08-19  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2552
2553         * configure.in: Accept i586 and i486 along with i386.
2554
2555 1994-08-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2556
2557         * configure.in: Do compute unexec, LIBX, system_malloc, etc
2558         even if CPP env var was set by the user.
2559
2560         * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2561
2562 1994-08-14  Jonathan I. Kamens  (jik@gza-client1.aktis.com)
2563
2564         * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2565
2566 1994-08-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2567
2568         * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2569
2570 1994-08-09  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2571
2572         * configure.in: Check more specifically for i*86-sun-sunos.
2573
2574 1994-08-03  Caveh Jalali  (caveh@eng.sun.com)
2575
2576         * configure.in: Handle solaris 2.4.
2577
2578 1994-07-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2579
2580         * configure.in (rand48): Check for it.
2581
2582 1994-07-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2583
2584         * make-dist: Update the info files.
2585
2586 1994-07-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2587
2588         * configure.in: Make "checking..." messages' style consistent.
2589         (HAVE_H_ERRNO): New test.
2590
2591 1994-07-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
2592
2593         * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2594
2595 1994-07-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2596
2597         * configure.in (CFLAGS): If the envvar was specified, use that.
2598         And set REAL_CFLAGS from it too.
2599
2600 1994-07-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2601
2602         * make-dist: Update finder-inf.el.
2603
2604 1994-07-07  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2605
2606         * make-dist (msdos): Include sed4.inp in dist.
2607
2608         * Makefile.in (libsrc_libs): Var deleted.
2609
2610 1994-07-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2611
2612         * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2613
2614 1994-06-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2615
2616         * configure.in (mips-sony-newsos4*): New alias.
2617
2618 1994-06-23  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2619
2620         * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2621         (*-convex-convexos*): Accept this as alias.
2622
2623 1994-06-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2624
2625         * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2626         for two different uses.
2627
2628 1994-06-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2629
2630         * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2631
2632 1994-06-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2633
2634         * make-dist: Put ./BUGS into the distrib.
2635
2636 1994-06-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2637
2638         * configure.in: Handle 386 running Solaris 2.
2639
2640 1994-06-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2641
2642         * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2643
2644 1994-06-05  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2645
2646         * configure.in (mips-sony-newsos*): Use news-risc.h.
2647
2648         * configure.in: Accept bsdi as opsys, like bsd386.
2649
2650 1994-06-01  Morten Welinder  (terra@diku.dk)
2651
2652         * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2653
2654 1994-05-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2655
2656         * Version 19.25 released.
2657
2658         * make-dist (shortversion): Don't assume another period follows.
2659
2660 1994-05-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2661
2662         * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2663         (uninstall): Use /bin/pwd.
2664
2665         * Makefile.in (blessmail): Depend on src.
2666         (all): Don't depend on blessmail.
2667
2668         * Makefile.in (src/paths.h): Don't force recomputation.
2669         (paths-force): New target; force recomputation of paths.h.
2670         (all): Depend on paths-force.
2671         (src, lib-src): Depend on src/paths.h.
2672
2673         * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2674         NON_GCC_TEST_OPTIONS.
2675
2676 1994-05-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2677
2678         * configure.in: Don't insist on subversions for irix.
2679
2680 1994-05-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2681
2682         * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2683
2684         * configure.in (i[34]86-next-*): New alternative.
2685
2686 1994-05-23  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2687
2688         * Version 19.24 released.
2689
2690         * configure.in: New config hppa*-hp-hpux9shr*.
2691
2692 1994-05-22  Morten Welinder  (terra@tyr.diku.dk)
2693
2694         * config.bat: Doc fix.
2695
2696 1994-05-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2697
2698         * Makefile.in (mostlyclean, clean, distclean, realclean)
2699         (extraclean): Don't act on man subdir if it doesn't exist.
2700
2701 1994-05-20  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2702
2703         * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2704         Use them to set up CC.
2705         (*-sun-sunos4.1.3): Set them.
2706
2707 1994-05-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2708
2709         * Makefile.in (lib-src): Don't depend on src/paths.h.
2710
2711 1994-05-18  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2712
2713         * build-ins.in (copydests): Get rid of spurious `-'s.
2714
2715         * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2716
2717 1994-05-17  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2718
2719         * Version 19.23 released.
2720
2721         * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2722         for the Xlib and Xt checks; then restore old CFLAGS.
2723
2724 1994-05-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2725
2726         * configure.in (HAVE_X11XTR6): Add newline before #if.
2727         Add newline after #endif.
2728
2729 1994-05-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2730
2731         * configure.in (HAVE_X11XTR6): Arrange to define it.
2732
2733 1994-05-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2734
2735         * Makefile.in (install): Depend on blessmail.
2736
2737 1994-05-12  David J. MacKenzie  (djm@nutrimat.gnu.ai.mit.edu)
2738
2739         * configure.in (mips-siemens-sysv*): Put quotes around value
2740         containing blanks.
2741
2742 1994-05-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2743
2744         * Makefile.in (TAGS): Use the makefile in src subdir.
2745
2746 1994-05-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
2747
2748         * configure.in (opsys): Recognize `gnu'.
2749
2750 1994-05-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2751
2752         * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2753
2754 1994-05-09  David J. MacKenzie  (djm@nutrimat.gnu.ai.mit.edu)
2755
2756         * configure.in: Remove AC_LANG_C call.  Not needed with Autoconf
2757          version > 1.8.
2758
2759 1994-05-08  Morten Welinder  (terra@diku.dk)
2760
2761         * config.bat: Forcibly remove "# " style comments from makefiles.
2762
2763 1994-05-08  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2764
2765         * Makefile.in (uninstall): When processing lispdir and etcdir,
2766         do nothing unless it exists and is a directory.
2767
2768 1994-05-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2769
2770         * Makefile.in (install-arch-indep): Do install info/dired-x*.
2771         Merge code in from install-doc.
2772         (install-doc): Merge code back into install-arch-indep.
2773         (install-arch-dep): Don't depend on install-doc.
2774
2775         * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2776
2777 1994-05-04  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2778
2779         * configure.in (making src/Makefile and lib-src/Makefile):
2780         Split off the autoconf substitutions and don't pass them thru cpp.
2781         (undefs): Use $canonical as well as $configuration.
2782
2783         * make-dist: Distribute lisp/Makefile.
2784
2785         * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2786         Use lower case names for the s files.
2787
2788 1994-05-03  Morten Welinder  (terra@diku.dk)
2789
2790         * config.bat: Added possibility for different file name
2791         transscriptions in lib-src.
2792
2793 1994-05-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2794
2795         * Makefile.in (lib-src): Undo previous change.
2796         (blessmail): New target to run maybe-blessmail in lib-src.
2797         (all): Depend on blessmail.
2798
2799         * Makefile.in (lib-src): Depend on src.
2800
2801 1994-04-30  Paul Reilly  (pmr@churchy.gnu.ai.mit.edu)
2802
2803         * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2804         (m88k-dg-dgux5.4R2): dgux5.4R2.
2805
2806 1994-04-29  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2807
2808         * configure.in (window_system): Restore accidentally deleted code
2809         that uses AC_FIND_X.
2810
2811         * make-dist: Distribute config.bat.
2812
2813 1994-04-29  Morten Welinder  (terra@diku.dk)
2814
2815         * config.bat: Corrected the configuration of lib-src
2816         to keep up with configure.  Add note about dos version 3
2817         or better needed (djgpp needs that).  Add note explaining
2818         that either install in c:/emacs or edit the script.
2819         Don't change to c:/emacs, but assume we're there (to minimize
2820         the number of places to change).
2821
2822         * config.bat: Build-in the first step towards X11 support with
2823         the X11 emulator that exists.  At this time it won't work,
2824         and several files are missing.
2825
2826 1994-04-28  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2827
2828         * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2829         Don't look for -lresolv.
2830
2831         * Makefile.in (lib-src): Depend on src/paths.h.
2832
2833 1994-04-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2834
2835         * configure.in: Restore deleted AC_SUBST of `configuration'.
2836         Improve error message for bad --with-x-toolkit value.
2837
2838         * configure.in: Define CONFIGURATION in src/config.h
2839         rather than substituting in src/Makefile.in.
2840
2841 1994-04-26  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2842
2843         * Makefile.in (install-doc): New target.
2844         (install-arch-dep): Depend on install-doc.
2845         (mkdir): Create docdir.
2846
2847 1994-04-22  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2848
2849         * configure.in: Test for libresolv.a.
2850         Substitute machfile and opsysfile.
2851
2852 1994-04-22  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2853
2854         * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2855         (install-arch-dep): Install under the name $(EMACS).
2856
2857 1994-04-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2858
2859         * configure.in (version): Use entire value of emacs-version.
2860         (mips-siemens-sysv*): New alternative.
2861
2862 1994-04-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2863
2864         * Makefile.in (install-arch-indep): Don't install dired-x*.
2865
2866 1994-04-18  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2867
2868         * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2869         Fix definition of $undefs.
2870
2871 1994-04-17  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2872
2873         * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2874
2875         * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2876
2877 1994-04-16  David J. MacKenzie  (djm@nutrimat.gnu.ai.mit.edu)
2878
2879         * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2880
2881 1994-04-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2882
2883         * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2884         and run it thru cpp, as with src/Makefile.in.
2885
2886         * configure.in: Use AC_SET_MAKE.
2887
2888 1994-04-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2889
2890         * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2891
2892 1994-04-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2893
2894         * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2895
2896         * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2897         (printing the choices): Make the toolkit message unconditional.
2898         (USE_X_TOOLKIT): Use `none', not `no', if none.
2899         (include libsrc_libs): Include config.h, and specify -I for srcdir.
2900         Get rid of temp file foofoo1.
2901
2902 1994-04-13  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2903
2904         * configure.in (CFLAGS): Use shell syntax, not Makefile.
2905
2906 1994-04-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2907
2908         * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2909         (printing the choices): State choice of toolkit.
2910         (libsrc_libs): Recalculate after writing config.h;
2911         then update lib-src/Makefile.
2912
2913 1994-04-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2914
2915         * configure.in: Add sunos4shr as alternative for suns.
2916         Conditionals testing for null $CC were backwards.
2917
2918 1994-04-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2919
2920         * make-dist (msdos): Don't link patch1.  Link sed*.inp, not sed.in*.
2921
2922 1994-04-09  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2923
2924         * configure.in: Handle -isc4.0*.
2925
2926 1994-03-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2927
2928         * configure.in (esix5): Set NON_GNU_CPP.
2929
2930 1994-03-24  Roland McGrath  (roland@mole.gnu.ai.mit.edu)
2931
2932         * Makefile.in (thisdir): Nonsensical variable removed.
2933         (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2934         back to $thisdir, rather than the directory `this_dir'.
2935
2936 1994-03-17  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
2937
2938         * Makefile.in (install-arch-indep): Add missing backslash after a
2939         `then'.
2940
2941 1994-03-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2942
2943         * Makefile.in (thisdir): New variable.
2944         (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2945
2946 1994-03-08  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2947
2948         * configure.in: Add freebsd.
2949
2950 1994-03-08  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
2951
2952         * configure.in: Check for fpathconf.
2953
2954 1994-03-02  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2955
2956         * configure.in (with_x_toolkit): Fix typo in previous change.
2957
2958 1994-03-01  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2959
2960         * configure.in: New s-file for rs60000-ibm-aix3.2.5.
2961
2962 1994-02-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2963
2964         * configure.in (with_x_toolkit): Don't allow motif or open-look.
2965
2966 1994-02-24  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
2967
2968         * configure.in: Fix value of docdir.
2969         * Makefile.in (install-arch-indep): Install DOC* in docdir.
2970
2971 1994-02-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2972
2973         * configure.in (*-sysv4.1): Set NON_GNU_CPP.
2974
2975 1994-02-22  Karl Heuer  (kwzh@geech.gnu.ai.mit.edu)
2976
2977         * configure.in: New variable docdir to control where the docstring
2978         file goes.
2979         Makefile.in: Use it to initialize PATH_DOC in paths.h.
2980
2981 1994-02-22  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
2982
2983         * configure.in: When --run-in-place, don't inherit archlibdir.
2984
2985 1994-02-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2986
2987         * Makefile.in (install-arch-dep, install-arch-indep):
2988         New targets split up former do-install rule.
2989         (do-install): Target deleted.
2990
2991 1994-02-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
2992
2993         * configure.in (mips-sony-newsos*): New configuration.
2994
2995 1994-02-14  Frederic Pierresteguy  (fp@mole.gnu.ai.mit.edu)
2996
2997         * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
2998
2999 1994-02-11  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
3000
3001         * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3002
3003 1994-02-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3004
3005         * configure.in: Don't initialize CC.
3006
3007 1994-02-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3008
3009         * configure.in (creating src/Makefile): Also generate -U switches
3010         for symbols in the $configuration value.
3011
3012         * configure.in: Check for sys_siglist being declared in system header.
3013
3014 1994-02-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3015
3016         * configure.in (creating src/Makefile): Delete blank lines
3017         along with lines of whitespace.
3018         (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3019
3020 1994-02-09  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3021
3022         * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3023         like C_SWITCH_SYSTEM.
3024         (m68*-motorola-sysv*): Set CC.  Require cpu type to be m68k or m68000.
3025
3026 1994-02-04  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
3027
3028         * configure.in (drem): Check for this function.
3029
3030 1994-02-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3031
3032         * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3033         If CPP was inherited from environment, don't use NON_GNU_CPP.
3034         (NON_GNU_CC): Likewise.
3035         (handling with_gcc): Use explicit if in the `no' case.
3036         (cc_specified): New variable; if set, don't use NON_GNU_CC.
3037
3038 1994-02-02  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3039
3040         * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3041
3042 1994-02-01  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
3043
3044         * configure.in: Check whether fmod exists.
3045
3046 1994-01-31  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3047
3048         * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3049         {src,lisp}/OChangeLog.
3050
3051 1994-01-22  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3052
3053         * configure.in: Restore Jan 8 and Jan 16 changes.  The -U hack is
3054         necessary for proper operation.  This code works with the current
3055         released version of Autoconf.
3056
3057 1994-01-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3058
3059         * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3060         (USE_X_TOOLKIT): Define it for all values except `no'.
3061
3062         * configure.in: Undo first Jan 8 change and Jan 16 change.
3063
3064 1994-01-18  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3065
3066         * configure.in: Handle --with-x-toolkit.  Produce lwlib/Makefile.
3067         Substitute USE_X_TOOLKIT as both C macro and Make variable.
3068
3069         * Makefile.in (lwlib/Makefile): New target.
3070         (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3071         (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3072         (unlock, relock): Handle lwlib subdir.
3073
3074         * Makefile.in: Add some .PHONY targets.
3075
3076         * make-dist: Handle lwlib subdir like oldXMenu subdir.
3077
3078         * lwlib: New subdirectory.
3079
3080 1994-01-17  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3081
3082         * configure.in: If CPP has a value that is a directory,
3083         discard the value.
3084
3085 1994-01-16  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3086
3087         * configure.in (srcdir_undefs): Add g flag to sed substitution to
3088         remove -U[0-9]*.
3089
3090 1994-01-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3091
3092         * Makefile.in (do-install): Install the dired-x info files.
3093
3094         * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3095         (See src/s/sol2.h.)
3096
3097 1994-01-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3098
3099         * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3100
3101 1994-01-08  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3102
3103         * configure.in (creating src/Makefile): Put code inside 2nd arg to
3104         AC_OUTPUT as it should be; hopefully noone will again see fit to
3105         gratuitously break this and not make a change log entry.
3106         Optimized sed processing of Makefile.in and cpp output; now
3107         preserves comments previously removed from the cpp input.
3108         Eliminated temp file for cpp output.  Generate -U switches to
3109         undefine all identifiers that appear in the directory name
3110         ${srcdir}; pass these to cpp.
3111
3112         * configure.in (version): Fix sed regexp to match two-elt version
3113         number.
3114
3115         * configure.in: Check for strerror.
3116
3117 1994-01-07  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3118
3119         * configure.in: Test for bcmp.
3120
3121 1994-01-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3122
3123         * make-dist (tempdir): Put subdir msdos into the distribution.
3124
3125 1993-01-07  Morten Welinder  (terra@diku.dk)
3126
3127         * config.bat: New file.
3128
3129 1994-01-02  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3130
3131         * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3132
3133 1994-01-01  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3134
3135         * configure.in (m68*-next-*): Don't care about which os is specified.
3136         (i[34]86-*-*): Check for *-nextstop*.
3137
3138 1993-12-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3139
3140         * configure.in: Check for setsid.
3141
3142 1993-12-17  Richard Stallman  (rms@srarc2)
3143
3144         * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3145
3146 1993-12-15  Richard Stallman  (rms@srarc2)
3147
3148         * Makefile.in (mkdir): Make only the lockdir writable.
3149
3150         * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3151
3152 1993-12-11  Richard Stallman  (rms@srarc2)
3153
3154         * Makefile.in (libdir): Use @libdir@.
3155
3156 1993-12-08  Richard Stallman  (rms@srarc2)
3157
3158         * Makefile.in (install): Add empty command.
3159
3160 1993-12-04  Richard Stallman  (rms@srarc2)
3161
3162         * make-dist: Put man/getopt.c in the dist.
3163
3164         * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3165
3166         * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3167
3168 1993-12-03  Richard Stallman  (rms@srarc2)
3169
3170         * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3171         Set it for all solaris versions.
3172         (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3173         (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3174         Likewise for NON_GNU_CC and CC.
3175
3176 1993-12-01  Richard Stallman  (rms@srarc2)
3177
3178         * configure.in (mips-mips-riscos4*): Assign variable CC.
3179         (checking ${with_gcc}): If "no", don't override CC if already set.
3180         (CC): Initialize it as empty.
3181
3182 1993-11-30  Richard Stallman  (rms at srarc2)
3183
3184         * configure.in (Suns): Set CPP if *-solaris2.3*.
3185
3186 1993-11-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3187
3188         * Version 19.22 released.
3189
3190         * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3191
3192 1993-11-25  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3193
3194         * make-dist: When breaking links, use cp -p.
3195         Copy install.sh into distribution.
3196         Move the temp dir up into the parent dir;
3197         don't leave the staging dir make-dist.tmp... in existence.
3198         * install.sh: New file.
3199
3200 1993-11-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3201
3202         * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3203
3204 1993-11-20  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3205
3206         * configure.in (version): When --run-in-place, exclude
3207         ${datadir}/emacs/site-lisp from locallisppath.
3208
3209 1993-11-18  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3210
3211         * configure.in: Delete jumk.c before writing it.
3212
3213 1993-11-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3214
3215         * Version 19.21 released.
3216
3217         * Makefile.in (mkdir): Ignore error from chmod.
3218
3219 1993-11-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3220
3221         * make-dist: Don't put lisp/forms.README in the distribution.
3222
3223 1993-11-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3224
3225         * configure.in (creating src/Makefile): Before running cpp,
3226         discard all lines that start with `# Generated' or /**/#.
3227
3228 1993-11-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3229
3230         * Version 19.20 released.
3231
3232         * make-dist: Use build-ins.in, not build-install.in.
3233         Don't bother updating TAGS since it's not included.
3234
3235         * build-ins.in: Renamed from build-install.in.
3236
3237 1993-11-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3238
3239         * make-dist: Don't try to link *.texinfo--there are none now.
3240         When running make in lib-src, specify YACC var value.
3241
3242 1993-10-03  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3243
3244         * configure.in (extrasub): Add vpath patterns for %.[yls].
3245
3246         * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3247         Instead just include the commands to make src/Makefile as the
3248         second arg to AC_OUTPUT.
3249
3250         * configure.in: Use : instead of dnl for comment inside
3251         $makefile_command.
3252
3253         * configure.in: No longer use vpath_sed.  Instead, when we notice
3254         srcdir already configured, set extrasub to hack vpath in the
3255         makefiles.
3256
3257         * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3258         before moving it.
3259         * Makefile.in (VPATH): Define to @srcdir@.
3260
3261 1993-09-28  Brian Fox  (bfox@cubit)
3262
3263         * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3264         doesn't exist.  Just copy src/Makefile.in instead.  Touch
3265         all of the Makefiles after editing config.status.
3266
3267         * INSTALL: Update documentation to match new configuration
3268         mechanism.
3269
3270 1993-09-27  Brian Fox  (bfox@ai.mit.edu)
3271
3272         * configure.in: Allow any of the path or directory Makefile
3273         variables to be set with flags to configure.  Create all Makefiles
3274         at configure time.  Edit special commands into config.status after
3275         src/Makefile.in is built from src/Makefile.
3276
3277         * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3278           If these files are out of date, simply have config.status
3279           rebuild them; don't rebuild them explicitly.
3280
3281 1993-09-25  Brian Fox  (bfox@ai.mit.edu)
3282
3283         * build-install.in: Change src/xemacs to src/emacs.  We no longer
3284         create src/xemacs, so the file wouldn't be found.
3285
3286         * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3287
3288 1993-09-24  Brian Fox  (bfox@albert.gnu.ai.mit.edu)
3289
3290         * configure.in: Avoid forcing the search of /usr/include before
3291         fixed include files by resetting C_SWITCH_X_SITE if it is
3292         "-I/usr/include".
3293
3294 1993-09-20  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3295
3296         * Makefile.in (@rip_paths@locallisppath):
3297         Delete ${datadir}/emacs/site-lisp.
3298
3299 1993-09-15  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3300
3301         * configure.in:
3302         Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3303         Remove ${extra_output} from AC_OUTPUT call.
3304
3305 1993-09-17  Brian Fox  (bfox@inferno)
3306
3307         * make-dist: Quote backquotes found in strings to be echoed.
3308
3309         * configure.in: Use "sh -c pwd" when we want to avoid having the
3310         shell fix up the value of $PWD.
3311
3312 1993-09-13  Brian Fox  (bfox@inferno)
3313
3314         * Makefile.in (do-install): Don't abort if ln or chmod at the end
3315         of the installation fail.  Suggested by Karl Berry.
3316
3317 1993-08-30  Brian Fox  (bfox@inferno)
3318
3319         * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3320         was used.  Set MAKEFLAGS from MFLAGS.
3321
3322 1993-09-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3323
3324         * configure.in: Test for res_init in libc.
3325
3326 1993-09-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3327
3328         * configure.in: In the file ${tempcname}, use configure___
3329         instead of @configure@.
3330
3331 1993-09-12  Roland McGrath  (roland@sugar-bombs.gnu.ai.mit.edu)
3332
3333         * make-dist: Dist vpath.sed
3334
3335         * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3336         Depend on vpath.sed.
3337         Replace sed comand for VPATH with @vpath_sed@.
3338
3339         * configure.in: Substitute variable `vpath_sed'.
3340         If not in $srcdir and $srcdir is configured,
3341         issue warning that GNU make is required,
3342         and set vpath_sed to use vpath.sed script.
3343
3344 1993-09-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3345
3346         * configure.in: Remove check for $srcdir being configured.  This
3347         pretty much works now.
3348         Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3349         Check for XFree86 (/usr/X386/include) independent of whether
3350         -lXbsd exists.
3351
3352         * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3353         realclean, unlock, relock): Use `$(MAKE)' in place of plain
3354         `make'.
3355
3356 1993-08-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3357
3358         * Version 19.19 released.
3359
3360         * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3361
3362 1993-08-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3363
3364         * configure.in: Check for XScreenNumberOfScreen.
3365
3366 1993-08-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3367
3368         * configure.in: Add * to end of all configuration alternatives.
3369         (m68*-sony-newsos3*): New alternative.
3370
3371 1993-08-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3372
3373         * make-dist: Include getdate.c in distribution.
3374
3375         * configure.in: For --help, use $PAGER if it is set.
3376         (LIB_X11_LIB): Default to -lX11.
3377         (mips-sgi-irix5.*): New alternative.
3378
3379         * Makefile.in (do-install): Install info/gnus* and info/sc*.
3380
3381         * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3382         Recognize *.B8.* as hpux version 8.
3383         (m68*-tektronix-bsd*): Fix typo in tek4300.
3384         (AC_HAVE_FUNCS): Add ftime.
3385
3386 1993-08-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3387
3388         * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3389         Use tekxd88, not tekXD88.
3390
3391 1993-08-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
3392
3393         * configure.in: Check for -lm.  Then can check for frexp and logb.
3394
3395 1993-08-08  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3396
3397         * Version 19.18 released.
3398
3399         * make-dist (src): Don't put gnu-hp300 in dist.
3400         (src, lisp): Include OChangeLog in dist.
3401
3402 1993-08-08  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3403
3404         * configure.in: Test for presence of logb and frexp functions.
3405
3406 1993-08-05  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3407
3408         * configure.in (machine): Add i370-ibm-aix*.
3409
3410 1993-08-03  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3411
3412         * configure.in (function checks): Test for mkdir and rmdir.
3413
3414         * configure.in (function checks): Don't test for random and bcopy
3415         only when we're building with X; look for them all the time.
3416
3417 1993-07-30  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3418
3419         * configure.in: Test for availability of bcopy functions, searching
3420         the X libraries if we're using X.
3421
3422         * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3423         and #define HAVE_AIX_SMT_EXP if we do.  This is present in some
3424         versions of AIX, and needs to be passed to the loader.
3425
3426         * configure.in: Test for the availablility of the
3427         XScreenResourceString function.
3428
3429 1993-07-30  David J. MacKenzie  (djm@frob.eng.umd.edu)
3430
3431         * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3432         LD_SWITCH_X_SITE and assume --with-x11.
3433         Only look for X11 files if we weren't told about a window system
3434         or if we were told to use X11 but not told where.
3435         Search the libraries from the s and/or m files when checking for
3436         functions.
3437
3438         * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3439
3440 1993-07-27  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3441
3442         * make-dist: Include lisp/dired.todo in the distribution.
3443
3444 1993-07-23  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3445
3446         * configure.in: Add code to set HAVE_INET_SOCKETS.
3447
3448 1993-07-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3449
3450         * configure.in: If we do find x_includes and x_libraries
3451         via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3452
3453 1993-07-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3454
3455         * make-dist: Include src/gnu-hp300 in the dist.
3456
3457         * configure.in (canonical): New variable holds the canonicalized
3458         configuration.  Don't alter `configuration'.  Use `configuration'
3459         for Makefile.in for file naming.
3460         (testing x_includes and x_libraries): Use =, not ==.
3461
3462 1993-07-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
3463
3464         * Version 19.17 released.
3465
3466         * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3467         directory's makefile.  This allows the invocation of CPP which
3468         builds xmakefile to receive these switches.  The SunSoft C
3469         preprocessor inserts spaces between tokens if it doesn't get the
3470         -Xs flag requested in src/s/sol2.h.
3471
3472 1993-07-12  Frederic Pierresteguy  (F.Pierresteguy@frcl.bull.fr)
3473
3474         * configure.in (m68k-bull-sysv3): new config.
3475
3476 1993-07-10  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3477
3478         * configure.in: Use the autoconf AC_FIND_X macro to try to find
3479         the X Windows libraries.
3480
3481 1993-07-07  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3482
3483         * make-dist (tempdir): Don't create lisp/forms-mode directory in
3484         the distribution.  Those files aren't kept in their own
3485         subdirectory any more.
3486
3487 1993-07-06  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3488
3489         * Version 19.16 released.
3490
3491 1993-06-23  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3492
3493         * configure.in: Add --verbose flag.
3494
3495 1993-06-19  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3496
3497         * version 19.15 released.
3498
3499 1993-06-18  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3500
3501         * Makefile.in (top_distclean): Use -f switch when cleaning out
3502         lock dir; it might be empty.
3503
3504         * configure.in: Only check for -lXbsd once.
3505
3506 1993-06-17  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3507
3508         * Version 19.14 released.
3509
3510 1993-06-17  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3511
3512         * make-dist: If using gzip, create distribution with '.gz' extension.
3513
3514         * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3515         (lisp/forms-mode): This doesn't exist anymore.
3516
3517         * configure.in: Look for the closedir function.
3518
3519 1993-06-16  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3520
3521         * configure.in (CPP): Autoconf sets this to a shell variable
3522         reference, which doesn't work when it's edited into a makefile.
3523         Expand that variable reference.
3524
3525         * Makefile.in (CPP): New variable.
3526         (src/Makefile): Edit CPP into src/Makefile.
3527
3528         * Makefile.in (src/Makefile): Don't bother exiting single quotes
3529         and entering double quotes to get the values of LD_SWITCH_X_SITE
3530         and the other make variables; make substitutes them in anyway.
3531
3532         * Makefile.in (uninstall): Don't remove the lisp and etc
3533         directories if they're in the source tree.
3534
3535         Bring mumbleclean targets into conformance with GNU coding standards.
3536         * Makefile.in (mostlyclean, clean): Separate these two; just have
3537         them pass the request to the subdirectory makefiles.
3538         (distclean): Pass the request down, and then get rid of the
3539         files configure built, and get rid of the Makefiles.
3540         (realclean): Pass the request down, and then do the same things
3541         distclean does.
3542         (uninstall, info, dvi): New targets.
3543
3544         * configure.in: Move clause for PC-compatible i386 box to the end
3545         of the case statement, to avoid masking configurations below.
3546
3547         * configure.in: Add case for m88k-motorola-sysv4.
3548
3549         * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3550         the HP 68000 machines.
3551
3552         * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3553         C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3554         preprocessor won't fiddle with them.
3555
3556 1993-06-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3557
3558         * Makefile.in (TAGS): cd to src to run etags.
3559
3560 1993-06-12  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3561
3562         * configure.in (version): Check the X libraries for XrmSetDatabase
3563         and random, and see if we have -lXbsd.
3564
3565 1993-06-11  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3566
3567         * configure.in: Pass "-Isrc" to the CPP we run to examine the
3568         s/*.h and m/*.h files.  Martin Tomes
3569         <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3570
3571 1993-06-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3572
3573         * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3574         above the general i386 alternative.
3575
3576 1993-06-10  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3577
3578         * configure.in: Recognize configuration name for Data General
3579         AViiON machines.
3580
3581         * configure.in: Use AC_LONG_FILE_NAMES.
3582
3583 1993-06-09  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3584
3585         * configure.in: Test for bison.
3586         * Makefile.in (YACC): New variable.
3587         (lib-src/Makefile.in): Edit YACC into the makefile.
3588
3589 1993-06-08  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
3590
3591         * Version 19.13 released.
3592
3593         * configure.in (CFLAGS): Don't set this according to the value of
3594         the GCC shell variable.  Instead, consult the machine and system
3595         files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3596         test __GNUC__ while we're at it.
3597
3598         * configure.in: Remove extra ;; from hpux cases.
3599
3600 1993-06-07  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
3601
3602         * configure.in: Check to see if the system has -ldnet.
3603
3604 1993-06-08  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3605
3606         * make-dist: Add clauses to distribute lisp/forms-mode.
3607
3608 1993-06-07  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3609
3610         * configure.in (machine): Fix the versions in hpux version number test.
3611         Do not guess based on cpu type.  Do check for explicit system version.
3612
3613 1993-06-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3614
3615         * configure.in: Do NOT look for `unknown' as company name.
3616
3617 1993-06-02  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3618
3619         * configure.in: Fix typo in message.
3620
3621 1993-06-01  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3622
3623         * Version 19.12 released.
3624
3625         * Makefile.in (do-install): Correct previous etc-copying change.
3626         Partially rewrite using `if'.
3627         (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3628
3629         * Version 19.11 released.
3630
3631         * configure.in: Handle 386bsd.
3632
3633 1993-05-31  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3634
3635         * make-dist: Update getdate.c.
3636
3637         * configure.in: Handle bsd386.
3638
3639         * Makefile.in (do-install): Use `-' in tar options.
3640
3641         * configure.in: Change  ! "${...}"  to  x"${...}" = x.
3642
3643         * Makefile.in (do-install): Copy the DOC-* files from the build
3644         etc directory, as well as lots of things from ${srcdir}/etc.
3645
3646         * make-dist: Copy config.guess.
3647
3648         * configure.in: Handle AIX versions 1.2, 1.3.
3649
3650 1993-05-30  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3651
3652         * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3653         the configuration name mips-mips-usg* to represent USG systems.
3654
3655         * configure.in: Fix logic to detect if srcdir is already configured.
3656
3657         * Makefile.in: Pass in LD_SWITCH_X_SITE.
3658
3659         * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3660         foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3661         of a directory; cd might fail, and have pwd print out the current
3662         directory.
3663
3664 1993-05-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3665
3666         * configure.in: When looking for sources, use '.', not `.`.  Also '..'.
3667
3668 1993-05-30  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3669
3670         * configure.in: Complain if srcdir points at an already-configured
3671         tree.
3672
3673 1993-05-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3674
3675         * Version 19.10 released.
3676
3677 1993-05-29  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3678
3679         * Makefile.in: Use Makefile comments, not C comments.
3680
3681         * configure.in: Add case for the Tektronix XD88.
3682
3683 1993-05-29  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3684
3685         * configure.in: Handle sysv4.2 and sysvr4.2.
3686
3687 1993-05-29  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3688
3689         * configure.in: Traverse the argument list without destroying it;
3690         don't use shift.  It turns out that "set - ${saved_arguments}"
3691         doesn't work portably.
3692
3693         * configure.in: Add missing "fi".
3694
3695         * make-dist: Rebuild configure if configure.in is newer.
3696
3697         * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3698         targets to be executed even if make remembers that it has already
3699         stisfied FRC.
3700
3701 1993-05-29  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3702
3703         * Makefile.in (do-install): Delete redundant code to copy etc twice.
3704
3705         * configure.in (romp): Handle various version numbers with aos and bsd.
3706
3707 1993-05-28  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3708
3709         * configure.in: Fix message text.
3710
3711 1993-05-28  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3712
3713         * make-dist: Make a `site-lisp' directory in the distribution,
3714         instead of a `local-lisp' directory, which hasn't been the
3715         appropriate name for a long time.
3716         * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3717         from the distribution first, then /usr/local/lib/emacs/site-lisp.
3718
3719         * Makefile.in (do-install): Correctly detect if ./etc and
3720         ${srcdir}/etc are the same.
3721
3722         * configure.in: Extract UNEXEC from the system configuration
3723         files, compute the name of the source file corresponding to the
3724         object file, and #define it as UNEXEC_SRC in config.h.
3725
3726         * configure.in: If srcdir is '.', then try using PWD to make it
3727         absolute.
3728
3729         * configure.in: Include ${srcdir} in the printed report, to help
3730         people notice if it's an automounter path.
3731
3732 1993-05-27  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3733
3734         * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3735
3736 1993-05-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3737
3738         * Makefile.in (do-install): Delete the dest dir, not the source dir,
3739         when they are different.  Add  `shift' command.
3740         (COPYDESTS, COPYDIR): Delete external-lisp dir.
3741         (externallispdir): Var deleted.
3742
3743         * configure.in: Delete spurious paren outputting short_usage.
3744
3745 1993-05-27  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3746
3747         * Version 19.9 released.
3748
3749 1993-05-26  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3750
3751         * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3752         subdirectory makes.
3753
3754         * make-dist: Check for .elc files with no corresponding .el file.
3755
3756         * Makefile.in (mkdir): Make all the directories in locallisppath.
3757
3758         * config.guess: New file.
3759         * configure.in: Use it, tentatively.
3760         * INSTNALL: Mention its usage.
3761
3762         * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3763         the former gives you the operating system rev directly.  Use
3764         s/hpux.h if we don't recognize what we got.
3765
3766         * Makefile.in (do-install): Don't remove a destination directory
3767         if it's the same as the source.  If ${srcdir}/info == ${infodir},
3768         don't try to copy the info files.
3769
3770         * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3771         doesn't work if you're not using a separate source directory.
3772         (do-install): Copy the build tree's etc directory only after
3773         making sure it's not also the source tree's etc directory.
3774
3775 1993-05-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3776
3777         * configure.in: Handle sunos4.1.3 specially.
3778
3779 1993-05-25  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3780
3781         * Makefile.in (INSTALL): Add definition.
3782
3783         * configure.in: Fix some messages.  Support -with-gnu-cc.
3784         At the end, use `set --', not `set -'.
3785         Delete spurious `.h' in hpux alternatives.
3786
3787 1993-05-25  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3788
3789         * Version 19.8 released.
3790
3791 1993-05-25  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3792
3793         * configure.in: When looking for source in the same directory as
3794         the configure script, make the path thus discovered absolute.
3795         If the user specifies the `--srcdir' switch, make that directory
3796         absolute too.
3797
3798         * Makefile.in (srcdir): Remove comment saying this doesn't work.
3799
3800         * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3801         too, as the value of the PATH_INFO macro.
3802
3803         * configure.in: Check to see if the source lives in the same
3804         directory as the configure script.
3805
3806 1993-05-24  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3807
3808         * Makefile.in (install): Split this into `install' and
3809         `do-install', to give people more control over exactly what gets
3810         done.
3811         (do-install): New target, containing the guts of `install'.  Don't
3812         remove and recreate the directories inside the copying loop - do
3813         it all before the copying loop.  Pass more flags to the lib-src
3814         make.
3815         (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3816         avoid errors and warnings.
3817
3818         * configure.in: For generic IBM PC boxes, insist on "unknown" for
3819         the manufacturer - the more general case was blocking other i386
3820         configuration names below, and that's how the names are written in
3821         MACHINES anyway.
3822
3823         * make-dist: When breaking links, remove the link before moving
3824         the copy onto it, to avoid interactive behavior.
3825
3826         * Makefile.in: Doc fix.
3827
3828         * configure.in: Doc fix.
3829
3830         * INSTALL: Mention --exec-prefix option.
3831
3832         * configure.in: Add support for the `--exec-prefix' option.
3833         * Makefile.in: Accept that support.
3834
3835         * configure.in: Use the AC_PROG_INSTALL macro.
3836         * Makefile.in (INSTALL): Variable removed.
3837         (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3838
3839         * configure.in: Distinguish between hp800's and hp700's by calling
3840         "uname -m".
3841
3842 1993-05-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3843
3844         * configure.in: Recognize configuration names for i860 boxes
3845         running SYSV.
3846
3847 1993-05-23  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3848
3849         * configure.in: Distinguish between hp800's and hp700's by the
3850         version of HP/UX they run, since that's something people are more
3851         likely to know - hp700's run 8.0.
3852         Add HP 700 configuration.
3853
3854         * configure.in: Test for the presence of the `rename' function.
3855
3856         * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3857         configure.in.
3858         (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3859
3860         * make-dist: Break intra-tree links.
3861
3862         * configure.in: Explain that this is an autoconf script, and give
3863         instructions for rebuilding configure from it.  Arrange to put
3864         comments in configure explaining this too.
3865
3866         * configure.in: Make the first line of the configure script be
3867         "#!/bin/sh".  Leaving the first line blank didn't work.
3868
3869         * configure.in (long_usage): Removed; made short_usage describe
3870         the options briefly.
3871
3872         * configure.in: Implement the --prefix option.
3873         * Makefile.in (prefix): Add support for it here.
3874         * INSTALL: Document it here.
3875
3876         * Makefile.in (install): Don't assume that the files in the `info'
3877         subdirectory match  *.info.  They don't have that prefix.
3878
3879 1993-05-22  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3880
3881         * configure.in: Add case for version 5 of Esix.
3882
3883 1993-05-22  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3884
3885         * Version 19.7 released.
3886
3887         * make-dist: There aren't any *.com files in lib-src anymore.
3888
3889         * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3890         them; they're symlinks to other filesystems on the GNU machines.
3891
3892         * make-dist: Check that the manual reflects the same version of
3893         Emacs as stated in lisp/version.el.  Edit that version number into
3894         the README file.
3895
3896 1993-05-21  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3897
3898         * configure.in: Remove the hack of AC_DEFINE; use
3899         AC_DEFINE_UNQUOTED.
3900
3901 1993-05-20  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3902
3903         * make-dist: Don't distribute precomp.com, compile.com, or
3904         link.com from ./src; they're in ./vms now.
3905
3906         Some time-handling patches from Paul Eggert:
3907         * configure.in: Add AC_TIMEZONE.
3908
3909 1993-05-19  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3910
3911         * configure.in: Recognize Linux as a valid operating system for
3912         the i386.
3913
3914 1993-05-18  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
3915
3916         * make-dist: Distribute some VMS files we got from Richard Levitte.
3917
3918         * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3919         the source for the sed command, not oldXMenu/Makefile.
3920
3921 1993-05-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
3922
3923         * INSTALL: Don't claim the srcdir option doesn't work.
3924
3925 1993-05-16  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
3926
3927         * configure.in: Include remarks saying what order the autoconf
3928         tests should go in, and remind people to change config.h.in
3929         whenever they add autoconf tests which make #definitions.
3930
3931         * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3932
3933 1993-05-15  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3934
3935         * Makefile.in (oldXMenu/Makefile): Make this depend on
3936         ${srcdir}/oldXMenu/Makefile.in, not itself.
3937
3938         * PROBLEMS: Some updates from David J. Mackenzie.
3939
3940         More changes from David J. Mackenzie.
3941         * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3942         removed; autoconf and config.h should specify all these
3943         differences.
3944         (buildlisppath): Make this path depend on ${srcdir}.
3945         (INSTALLFLAGS): Removed.
3946         (INSTALL): Include the -c flag.
3947         (install): Change the way we invoke install accordingly.
3948
3949         Install ${srcdir} changes from DJM.
3950         * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3951         list.
3952         (COPYDIR, COPYDESTS): Install files from both the etc directory in
3953         the source tree and the etc directory in the object tree.
3954         (${SUBDIR}): Pass the prefix variable down to submakes.
3955         (everywhere): Use `sed', not `/bin/sed'.  Not all systems have sed
3956         in /bin.
3957         (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
3958         values for srcdir and VPATH.
3959         (install): Add `v' flag to tar command.  Make sure that `dir'
3960         exists in ${srcdir}/info before copying it.  Remember that the man
3961         pages come from the source tree, not the object tree.
3962         * configure.in: Remove remarks saying that the --srcdir option
3963         doesn't work.
3964         Create the etc directory in the object tree.
3965         Recognize configuration names of the form *-sun-solaris*.
3966         Recognize sunos5 and solaris as operating system names.
3967
3968         * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
3969         lib-src/getdate.y and src/systime.h.
3970
3971 1993-05-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
3972
3973         * make-dist: Make links in info subdir.
3974
3975 1993-05-13  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
3976
3977         * configure.in: Call AC_STDC_HEADERS.
3978
3979 1993-05-10  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
3980
3981         * configure.in: Sidestep autoconf's quoting of the second argument
3982         of AC_DEFINE, so we can specify the value to put there.  It would
3983         be nice if autoconf provided some way to specify computed values
3984         for macros.
3985
3986 1993-05-09  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
3987
3988         * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
3989         this is always just -DHAVE_CONFIG_H.
3990
3991         The GNU coding standards specify that CFLAGS should be left for
3992         users to set.
3993         * Makefile.in (CFLAGS): Let configure determine the default value
3994         for this.  Don't
3995         have it default to DEFS.
3996         (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
3997         (lib-src/Makefile, src/Makefile): Edit the default value for
3998         CFLAGS into these files, not DEFS.
3999         * configure.in (CFLAGS): Choose a default value for this - "-g"
4000         normally, or "-g -O" if we're using GCC.  Edit it into the
4001         top-level Makefile.
4002
4003         * configure.in: When scanning the machine and system description
4004         #include files, write their names to conftest.c properly.
4005
4006 1993-05-07  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4007
4008         * configure.in: In configuration name case for Apallos running
4009         Domainios, set opsys, not opsysfile.
4010
4011         * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4012         src/config.h, instead of AC_OUTPUT; the latter overwrites
4013         src/config.h even when it hasn't changed, puts a makefile-style
4014         comment at the top even though it's C code, and produces a
4015         config.status script which doesn't do the job right.
4016
4017         * configure.in: Add AC_LN_S test, so we can tell whether or not we
4018         can use a symbolic link to get the X Menu library into src.
4019         * Makefile.in (LN_S): New variable.
4020         (src/Makefile): Edit the value of LN_S into this makefile.
4021
4022 1993-05-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
4023
4024         * configure.in: Support *-sco3.2v4* as opsystem.
4025
4026         * make-dist: Don't include calc directory.
4027         Exclude many files in the man directory; copy a few.
4028
4029 1993-05-04  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4030
4031         * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4032         call AC_STRUCT_TM to see what's in time.h.
4033
4034         * configure.in: Employ quoting stupidity to get the value of CPP
4035         to expand properly.
4036
4037 1993-04-27  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4038
4039         * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4040         variable to scan the machine and system description files.
4041
4042         * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4043         so that getdate.y builds correctly.
4044
4045 1993-04-26  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4046
4047         * configure.in (tempcname): Change this to "conftest.c", so it will
4048         work properly on systems with short filenames; this is the name
4049         autoconf uses.
4050
4051         * configure.in: Also detect the availability of dup2 and
4052         gethostname.
4053
4054         * configure.in: Use the AC_ALLOCA test.
4055         * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4056         (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4057
4058 1993-04-24  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4059
4060         * make-dist: Distribute configure, as well as configure.in.
4061         Oversight.
4062
4063 1993-04-23  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4064
4065         * Makefile.in (install): Print out the name of the directory we're
4066         copying, so people can have some idea of whether we're making
4067         progress.
4068
4069         * Makefile.in (install.aix, install.xenix, install.sysv, install):
4070         Don't forget to re-create the COPYDESTS directories after we clear
4071         them out.
4072
4073 1993-04-13  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4074
4075         * Makefile.in: Add autoconf cookies so that the configure
4076         script can comment out sections of path variable definitions to
4077         choose between the installable configuration and the run-in-place
4078         configuration.
4079         * configure.in: Add new option `--run-in-place', to select the
4080         run-in-place path definitions.
4081
4082         * configure.in: Add a clause to the big configuration name case
4083         for the NeXT machine.
4084
4085 1993-04-12  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4086
4087         * Makefile.in (install, install.sysv, install.xenix, install.aix):
4088         Make sure that each source directory exists, and is different from
4089         the destination directory; then, delete the destination before
4090         copying over the source.
4091
4092         * make-dist: Distribute configure.in, instead of configure.
4093
4094 1993-04-10  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4095
4096         * configure.in: Don't set CC to "gcc -O" if the user specifies
4097         `--with-gcc'.  Add -O to DEFS if GCC is set.
4098
4099 1993-04-09  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4100
4101         * Makefile.in (clean mostlyclean): Missing right paren.
4102
4103         * configure.in: When checking for X windows, search for an X11
4104         subdirectory of ${x_includes}.
4105
4106         * configure.in: Check for gettimeofday function, for getdate.y.
4107
4108         Change `configure' to a mixture of custom code and autoconf stuff.
4109         autoconf can't derive all the information we need, but we'd really
4110         like to be able to take advantage of some of its tests, and its
4111         file-editing facilities.
4112         * configure.in: Renamed from configure.
4113         Quote the sections of shell script we want copied literally to
4114         the configure script.
4115         (compile): Initialize this to make the autoconf macros' code happy.
4116         Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4117         code to do their jobs.
4118         Use autoconf to produce Makefile and src/config.h.
4119         Remove the Makefile-style comment that autoconf places at the top
4120         of src/config.h.
4121         (config_h_opts): Removed - no longer necessary.
4122         * Makefile.in (configname): Renamed to configuration.
4123         (CONFIG_CFLAGS): Renamed to DEFS.
4124         (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4125         get values via autoload @cookies@.
4126         (libsrc_libs): Get this from autoconf.  We used to do nothing
4127         about this.
4128         (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4129
4130         * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4131         echo the move-if-change command.
4132
4133 1993-04-08  Jim Blandy  (jimb@churchy.gnu.ai.mit.edu)
4134
4135         * make-dist: Distribute lib-src/rcs-checkin.
4136
4137         * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4138         Don't try to make links to the RCS or Old subdirectories.
4139         Use the appropriate extension for the compression type in use.
4140         Create the tar file in the shell's initial default directory, not
4141         in ${tempparent}.
4142         Erase the whole ${tempparent} tree, not just ${tempdir}.
4143
4144 1993-03-30  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4145
4146         * Makefile.in (src/paths.h): Don't echo the huge sed command we
4147         use to build paths.h.
4148         (lib-src/Makefile, src/Makefile): Similarly.
4149
4150         * configure: Extend test for working `const' keyword to handle AIX
4151         3.2 cc.
4152
4153 1993-03-24  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4154
4155         * make-dist: Distribute lisp/term/ChangeLog.
4156
4157         Arrange for C compilation throughout the tree to get
4158         C_SWITCH_SYSTEM from the configuration files.
4159         * configure: Extract C_SWITCH_SYSTEM from the machine and
4160         system-dependent files, and save it in the top-level Makefile.
4161         * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4162         (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4163
4164         * make-dist: Include the VMS support files in oldXMenu in the
4165         distribution.
4166
4167         * configure: Doc fix.
4168
4169         * configure: Fix corrupted config_h_opts.
4170
4171         * configure: Properly report option names in error messages.
4172
4173         * configure: Properly recognize --x-includes and --x-libraries
4174         options.
4175
4176         * configure: Fix syntax errors in code handling XFree386.
4177
4178 1993-03-23  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4179
4180         * configure: Add special code to detect XFree386, and tell
4181         config.h about it.
4182
4183         * configure: Properly handle extracting values of LIBS_MACHINE and
4184         LIBS_SYSTEM that contain spaces.
4185
4186         * configure: Add `--x-includes' and `--x-libraries' options.  I
4187         think these are dopey, but no less than three alpha testers, at
4188         large sites, have said they have their X files installed in odd
4189         places.  Implement them by setting C_SWITCH_X_SITE and
4190         LD_SWITCH_X_SITE in src/config.h.
4191
4192 1993-03-22  Eric S. Raymond  (eric@geech.gnu.ai.mit.edu)
4193
4194         * make-dist: Don't distribute etc/Old files.
4195
4196         * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4197           backups.
4198
4199 1993-03-20  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4200
4201         * make-dist: Fix typo.
4202
4203 1993-03-19  Eric S. Raymond  (eric@geech.gnu.ai.mit.edu)
4204
4205         * make-dist: Corrected typo, fixed it to discard = and TAGS files
4206         in some cases where it should but didn't seen to.
4207
4208         * Makefile.in: Added unlock and relock productions.
4209
4210 1993-03-18  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4211
4212         * make-dist: Add a --compress option to force make-dist to use
4213         compress.
4214
4215         * make-dist: Use gzip, if we can find it.
4216
4217         * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4218         make rs6000-ibm-aix default to -aix32.
4219
4220 1993-03-17  Eric S. Raymond  (eric@geech.gnu.ai.mit.edu)
4221
4222         * Makefile.in: Added `Developer's configuration' section.
4223
4224 1993-03-17  Eric S. Raymond  (eric@mole.gnu.ai.mit.edu)
4225
4226         * Makefile.in: Add commented-out variable settings for developer's
4227           configuration.
4228
4229 1993-03-14  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4230
4231         * make-dist: Distribute `src/bitmaps' too.
4232
4233 1993-03-14  Charles Hannum  (mycroft@hal.gnu.ai.mit.edu)
4234
4235         * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4236         make rs6000-ibm-aix default to -aix32.
4237
4238 1993-03-09  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4239
4240         * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4241
4242         * Makefile.in (install.sysv): Add a second `$' in front of
4243         `${dest}', so that the shell will expand it, instead of Make.
4244
4245         * configure: When processing the name of the configure script,
4246         collapse `././' to `./', but leave a single `./' prefix alone.
4247
4248         * configure: Doc fix.
4249
4250 1993-03-04  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4251
4252         * configure: Handle isc3.0 correctly.
4253
4254 1993-02-25  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4255
4256         * make-dist: Don't try to copy the COPYING notice into
4257         external-lisp; we're not distributing that directory any more.
4258
4259 1993-02-24  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4260
4261         * Makefile.in (install, install.aix, install.xenix, install.sysv):
4262         Remove CVS subdirectories from the installed directory trees, as
4263         well as RCS directories.
4264
4265 1993-02-23  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4266
4267         * make-dist: Only copy gmalloc.c if we couldn't link it.
4268         Don't try to copy man/{README,Makefile} unless they actually exist.
4269
4270         * Makefile.in (lisppath): Don't include externallispdir in this.
4271         We're not sure whether we're even going to distribute the
4272         directory yet.
4273
4274 1993-02-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4275
4276         * make-dist: Don't distribute the external-lisp directory anymore.
4277         * INSTALL: Remove all references to external-lisp.
4278
4279         * configure: Detect whether the compiler supports `const'
4280         properly, and edit src/config.h accordingly.
4281
4282         * configure: Tweak layout of final report.
4283
4284         * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4285         CFLAGS.
4286
4287         * Makefile.in (locallisppath): Make this default to
4288         ${datadir}/emacs/site-lisp, instead of
4289         ${datadir}/emacs/local-lisp.  ${datadir} and ${statedir} are often
4290         the same thing, and local-lisp causes completion conflicts with
4291         lock.
4292         (lisppath): Add ${externallispdir} to this.
4293         * INSTALL: Adjust installation directions.
4294
4295         * Makefile.in (externallispdir): New variable, to say where to
4296         install the externally-maintained lisp files.
4297         (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4298         the others.
4299         * INSTALL: Describe external-lisp and the new externallispdir
4300         variable.
4301
4302 1993-02-14  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4303
4304         * configure (progname): New option `--with-gcc'.  Make it clearer
4305         how we are trying to guess whether or not we have GCC.
4306         * INSTALL: Document the `--with-gcc' option, and improve
4307         description of `--with-x' options.
4308
4309 1993-02-06  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4310
4311         * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4312         ${infodir} from these variables; we have written out explicit code
4313         to install the info files.
4314
4315 1993-01-25  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
4316
4317         * make-dist: Don't distributed the RCS files in the etc directory.
4318
4319 1993-01-24  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4320
4321         * Makefile.in: Some makes can't handle comments in the middle of
4322         commands; move them to before the whole rule.
4323
4324 1993-01-16  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4325
4326         * README: Mention what Emacs is.
4327
4328 1993-01-14  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4329
4330         * make-dist: Include `./lisp/calc-2.02' in the distribution.
4331         Add `./cpp' and `./man' back into the distribution.
4332
4333 1993-01-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
4334
4335         * Makefile.in: Define MAKE, and use where appropriate.
4336
4337 1993-01-07  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4338
4339         * make-dist: Remember that the authoritative COPYING notice is
4340         `etc/COPYING', not `../etc/COPYING'.
4341
4342 1992-12-20  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4343
4344         * make-dist: Make sure that the COPYING notices in each directory
4345         are copies, not symlinks.
4346
4347 1992-12-19  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4348
4349         * INSTALL: The build process produces an executable called `emacs'
4350         now.  Change references.
4351         * Makefile.in: Adjust `install.mumble' targets to install
4352         `src/emacs', not `src/xemacs'.
4353
4354         * configure: Start with a blank line; this keeps some old CSH's
4355         from thinking it's a CSH script.  Most systems will just use
4356         /bin/sh to run it, which is what we're expecting; the only other
4357         shells which might try to interpret it themselves are probably
4358         Bourne-compatible.
4359
4360 1992-12-14  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4361
4362         * INSTALL: Improvements suggested by David Mackenzie.
4363
4364 1992-12-12  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4365
4366         * Makefile.in (install, install.sysv, install.xenix, install.aix):
4367         Don't try to copy the info files if there aren't any; the
4368         unexpanded globbing pattern disappoints `install'.  Ignore the
4369         return status of that command.
4370
4371         * INSTALL: Updated for new configuration arrangement.
4372
4373         * configure: Don't make the top-level Makefile read-only - people
4374         may want to edit the values of the path variables.
4375
4376         * Makefile.in (install, install.sysv, install.xenix, install.aix):
4377         Install the info files in ${infodir}.  Install the executable
4378         under both `emacs' and `emacs-VERSION'.
4379
4380         * Makefile.in: Doc fix.
4381
4382         * Makefile.in (exec_prefix): New variable, as per latest version
4383         of coding standards.
4384         (bindir, libdir): Use it, instead of `prefix'.
4385         (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4386
4387         * Makefile.in (mandir): Make the default value for this depend on
4388         $(prefix).
4389
4390         * Makefile.in (datadir, statedir, libdir): Make these all default
4391         to ${prefix}/lib.
4392         (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4393         to compensate.
4394
4395         * Makefile.in (install, install.sysv, install.xenix, install.aix):
4396         Install the etags and ctags man pages too.
4397
4398         * Makefile.in (distclean): Don't delete backup files; that's the
4399         job of extraclean.
4400         (extraclean): Like distclean, but deletes backup and autosave files.
4401
4402 1992-12-10  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4403
4404         Make path specification conform to GNU coding standards.
4405         * configure (long_usage): Remove all traces of old arguments from
4406         usage messages, and document the options we do accept in more
4407         detail: -with-x... and --srcdir.
4408         (options, boolean_opts): Deleted; we don't have enough options to
4409         make this worthwhile.
4410         (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4411         along with the code which supported them; these should be set as
4412         arguments to the top-level make.
4413         (config_h_opts): Since this no longer doubles as a list of option
4414         names, make them upper case; this simplifies the code which uses
4415         them to build the sed command to edit src/config.h.  Change the
4416         code which sets them.
4417         (cc, g, O): Don't allow the user to set these using options; they
4418         should be specified using `CC=' and `CFLAGS=' arguments to the
4419         top-level make.  Just choose reasonable default values for them,
4420         and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4421         values.
4422         (gnu_malloc, rel_alloc): Don't allow the user to set these using
4423         options; use them whenever the configuration files say they're
4424         possible.
4425         Simplify the argument processing loop.  Don't accept abbreviations
4426         for option names; these might conflict with other configuration
4427         options in the future.
4428         Add some support for the `--srcdir' option.  Check for the sources
4429         in . and .. if `--srcdir' is omitted.  If the directories we will
4430         compile in don't exist yet, create them under the current directory.
4431         Note that the rest of the build process doesn't really support
4432         this.
4433         Edit only the top Makefile.  That should edit the others.  Edit
4434         into the makefile: `version', from lisp/version.el, `configname'
4435         and `srcdir' from the configuration arguments, `CC' and
4436         `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4437         the user's path, and LOADLIBES as gleaned from the system
4438         description files.
4439         Simplify the report generated; it doesn't need to include any
4440         description of paths now.
4441         Make `config.status' exec configure instead of just calling it, so
4442         there's no harm in overwriting `config.status'.
4443         * Makefile.in (version, configname): New variables, used to choose
4444         the default values for datadir and libdir.
4445         Path variables rearranged into two clearer groups:
4446         - In the first group are the variables specified by the GNU coding
4447           standards (prefix, bindir, datadir, statedir, libdir, mandir,
4448           manext, infodir, and srcdir).
4449         - In the second are the variables actually used for Emacs's paths
4450           (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4451           archlibdir), which depend on the first category.
4452         datadir and libdir default to directories under
4453         ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4454         demand.
4455         etcdir and lispdir default to subdirectories of datadir.
4456         archlibdir defaults to libdir.
4457         The new installation tree is a bit deeper than it used to be, so
4458         use the new make-path program in lib-src to build them all.
4459         Always build a new src/paths.h.tmp and then move-if-change it to
4460         src/paths.h, to avoid unnecessary rebuilds while responding to the
4461         right changes.
4462         Remove all mention of arch-lib.  Run utility commands from
4463         lib-src, and let the executables be copied into archlibdir when
4464         Emacs is installed.
4465         Add targets for src/Makefile, lib-src/Makefile, and
4466         oldXMenu/Makefile, editing the values of the path variables into
4467         them.
4468         Let lib-src do its own installation.
4469         (datadir): Default to putting data files under
4470         ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4471         (emacsdir): Variable deleted; it would only be confusing to use.
4472         (lispdir, etcdir): Default to ${datadir}/lisp.
4473         (mkdir): Use make-path for this.
4474         (lockdir): Do this in mkdir.
4475         (Makefile): New target.
4476
4477         * configure (usage_message): Rename to long_usage.
4478
4479         * make-dist: Don't bother creating an arch-lib directory; that's
4480         only for installation now.
4481
4482 1992-11-20  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4483
4484         * configure: Use GCC-style configuration names, using config.sub.
4485         Change the usage and help messages.
4486
4487         * configure: Initialize window_system, not indow_system.
4488
4489         * configure: Report which window system, compiler, and signal
4490         handler return type we decide to use.
4491
4492         * make-dist: Explain what's going on if config.sub and gmalloc.c
4493         can't be linked.  Place the code which copies them near the code
4494         which links the rest of the files around them.
4495
4496 1992-11-15  Jim Blandy  (jimb@apple-gunkies.gnu.ai.mit.edu)
4497
4498         * make-dist: Don't bother to distribute src/*.com, or
4499         src/vmsbuild; those have all been moved to `../vms'.
4500
4501 1992-11-07  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4502
4503         * make-dist: Don't forget that the way to avoid filenames starting
4504         with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4505         `[a-zA-Z0-9].h'.  Add a new section for dealing with files that we
4506         couldn't make hard links to, since we have two already, and
4507         perhaps more to come.
4508
4509 1992-11-04  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4510
4511         * configure: When editing parameters into lib-src/Makefile, change
4512         the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4513         needs some other flags too.
4514
4515 1992-11-03  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4516
4517         * configure: Remove spurious echo of the configuration name.
4518
4519         * make-dist: Don't distribute files in src/m and src/s whose names
4520         begin with `='.
4521
4522 1992-10-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
4523
4524         * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4525         Also LISP_FLOAT_TYPE.
4526
4527 1992-10-26  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4528
4529         * make-dist: Copy config.sub, since it's a symbolic link to a file
4530         on another file system.
4531
4532 1992-10-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4533
4534         * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4535         distribution.
4536
4537         * config.sub: New file, to help us recognize configuration names.
4538         * make-dist: Include it in the distribution.
4539
4540 1992-09-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
4541
4542         * configure: Convert `-' to `_' in specified option names.
4543         Accept options with --.  Delete --highpri and --have-x-menu options.
4544         New options --with-x and --with-x10 replace -window-system.
4545         Don't mention options --gnu-malloc, --rel-alloc
4546         or --lisp-float-type in help message.
4547
4548 1992-09-13  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4549
4550         * make-dist: Include the `vms' subdirectory in the distribution.
4551
4552 1992-09-10  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4553
4554         * configure: Remove lines starting with "# DIST: " when building
4555         lib-src/Makefile and src/Makefile.  This allows us to mark the
4556         "Makefile.in" files with explanatory comments which won't also get
4557         stuck in the Makefiles.
4558
4559 1992-09-05  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4560
4561         * make-dist: Don't use the '+' operator in the sed regular
4562         expression that extracts the version number from lisp/version.el;
4563         Ultrix sed doesn't seem support the operator.  Just double the
4564         operand and use *.
4565
4566 1992-09-01  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4567
4568         * Makefile.in: Doc fix.
4569
4570 1992-08-31  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
4571
4572         * configure: Rewrite sed command to remove at most one ./ prefix;
4573         Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4574         group.
4575
4576 1992-08-25  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
4577
4578         * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4579
4580 1992-08-18  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4581
4582         * make-dist: Go ahead and build a new TAGS file, unless the
4583         --newer option was specified.  Don't try to delete a TAGS file
4584         from etc; it's not kept there, and shouldn't be deleted anyway.
4585
4586 1992-08-14  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4587
4588         * make-dist: If the lisp directory contains a default.el, don't
4589         distribute it.
4590
4591         * configure: When searching signal.h for the type of a signal
4592         return handler, make a copy of it, not a symbolic link to it; that
4593         way, it will work on systems that don't have symbolic links.
4594
4595 1992-08-14  Eric S. Raymond  (eric@mole.gnu.ai.mit.edu)
4596
4597         * make-dist: taught it about vcdiff and rcs2log, added --newer
4598         option for generating incremental distributions.  Stopped it from
4599         generating a TAGS file into the distribution; that sucker is
4600         *big*, and easily enough generated with the toplevel makefile.
4601
4602 1992-08-13  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4603
4604         * configure: When writing config.status, don't prefix progname
4605         with a '.'; it might be absolute.
4606
4607 1992-08-05  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4608
4609         * configure: Choose to use X11 if either /usr/lib/libX11.a or
4610         /usr/include/X11 exist, not only if both exist.
4611
4612 1992-07-27  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4613
4614         * make-dist: Make the new external-lisp directory a duplicate of
4615         the external-lisp directory, not the lisp directory.
4616
4617 1992-07-07  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4618
4619         * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4620         clean' in arch-lib; it doesn't even have a Makefile.
4621
4622         * Makefile.in (clean, mostlyclean): In the test which tries to
4623         distinguish between the build directory, which should be cleaned,
4624         and the installed directory, which shouldn't, cd to `${emacsdir}',
4625         not `${DESTDIR}${LIBDIR}'.
4626
4627 1992-06-30  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4628
4629         * make-dist: Be sure to delete the .c and .h files that YACC and
4630         BISON create from getdate.y.
4631
4632         * external-lisp: New directory; see `external-lisp/README'.
4633         * make-dist: Added support for the external-lisp subdirectory.
4634
4635         * make-dist: Changed message which complains that make-dist wasn't
4636         invoked in the right directory to indicate which files it was
4637         looking for.
4638
4639 1992-06-29  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4640
4641         * configure: Add comments explaining why we can't translate
4642         character ranges or control characters in `tr'.
4643
4644 1992-06-24  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4645
4646         * configure: When generating the configuration message, we used to
4647         build the message from the start so that each line began with "# "
4648         so that it would be a comment in `config.status'.  However, this
4649         causes trouble if any of the variables we use in the message
4650         expand to more than one line of text - as gnu_malloc_reason
4651         sometimes does.  So instead, we build the message as it should be
4652         printed to the user (i.e. without the "# " prefixes), and stick on
4653         the "# "s when we write it to `config.status'.
4654
4655         * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4656         `lib-src' and `arch-lib'.
4657
4658         * configure: When generating report and `config.status' file, note
4659         that bindir only determines where `make install' and
4660         `build-install' will place the executables; this should make it
4661         clear that the ordinary build process will not try to install
4662         things.
4663
4664 1992-06-10  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
4665
4666         * make-dist: Change messages to say that we are 'making links to
4667         X', rather than 'copying X'.  And put `' quotes around file names.
4668
4669         * make-dist: Include '.tmp' in the name of the staging directory.
4670
4671         * make-dist: Pass the `-f' option to rm when you're not sure that
4672         the files you're removing actually exist.
4673
4674         * make-dist: When setting up etc/COPYING, always nuke whatever is
4675         there, and then copy it in, to make sure we get a real file.
4676
4677         * make-dist: Don't try to distribute *.defns files any more.  The
4678         only such file was for simula.el, which has been superceded by a
4679         version which doesn't have a separate .defns file.
4680
4681 1992-05-28  Ken Raeburn  (Raeburn@Cygnus.COM)
4682
4683         * make-dist: Don't distribute configured versions of config.h.in,
4684         paths.h.in, Makefile.in in src.
4685
4686         * configure: Delete .tmp files before creating them; don't bother
4687         trying to make final targets writeable first, since it won't
4688         matter to move-if-change.
4689
4690 1992-05-19  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4691
4692         * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4693         mkdir and chmod in the center of all the conditionals.  GNU Make
4694         will strip these out, but other makes won't.
4695
4696 1992-05-18  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4697
4698         * make-dist: Include move-if-change in list of files to distribute.
4699
4700 1992-05-04  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4701
4702         * configure: Remove any "." elements from the program name.
4703
4704         * configure: Don't record the values of all the possible arguments
4705         in config.status; only record the options that the user specified.
4706
4707         * configure: Use move-if-change to move in the new src/config.h.
4708
4709 1992-04-29  Ken Raeburn  (Raeburn@Cygnus.COM)
4710
4711         * move-if-change: New file, copied from gcc release.
4712         * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4713         a temp file, so we don't update paths.h if an error occurs or if
4714         it doesn't need changing.
4715
4716 1992-04-28  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4717
4718         * Makefile.in (src/paths.h): Do not install a value for the
4719         PATH_SUPERLOCK value; that macro doesn't exist anymore.
4720         * build-install.in: Same thing.
4721
4722 1992-04-24  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4723
4724         * make-dist: Check the flag called "make_tar", not "make_dir"; the
4725         latter, being a typo, is always false, resulting in a program
4726         whose default behaviour is to painstakingly build a copy of the
4727         source tree, and then delete it.  Rah.
4728
4729         * Makefile.in: Add dist target, and comment for it.
4730
4731         * configure: When scanning <signal.h> for a declaration for
4732         signal, create a symbolic link with a name ending in .c, so the
4733         compiler won't complain that it's only been given .h files.
4734
4735         * configure: Check whether there are any arguments available
4736         before shifting to get the value of a non-boolean parameter.
4737
4738         * make-dist: Doc fix.
4739
4740 1992-04-20  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4741
4742         * configure: Instead of grepping /usr/include/signal.h for a
4743         signal declaration, run /usr/include/signal.h or
4744         /usr/include/sys/signal.h through cpp and grep for the
4745         declaration.
4746
4747         * configure: Redirect the output of grep to /dev/null instead of
4748         using grep -s - that flag means different things on other systems.
4749
4750         * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4751         since the former is recognizable even if you don't know what
4752         'dumping' is.
4753         * configure: Accomodate that change.
4754
4755         * configure: Accept options for all of the directories you can
4756         change in the Makefile.
4757
4758         * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4759
4760         * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4761         FOO before you can use them.
4762
4763         * build-install.in: Made the "Where To Install Things" section
4764         conform with the similar section from Makefile.in.  Copied section
4765         which builds src/paths.h from src/paths.h.in from the Makefile.
4766
4767 1992-04-19  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4768
4769         * configure: Write config.status to pass its command-line
4770         arguments on to configure, so that people can use it to recreate
4771         an old configuration, with minor changes.
4772
4773 1992-04-16  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4774
4775         * configure: Don't rely on option variables being unset if their
4776         values are the empty string.  In particular, when producing the
4777         English report, don't assume that highpri will be unset when no
4778         increased priority has been requested; -highpri='' should be the
4779         same as omitting -highpri altogether.
4780
4781         * configure: Fix dumb bug: when running the system and machine
4782         description files through cpp, mark those lines that we want to
4783         evaluate with the string '@configure@', and then only evaluate
4784         them.  This way if the files include anything that actually
4785         generates text (type definitions or external declarations, say),
4786         we won't try to eval it.
4787
4788 1992-04-11  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4789
4790         * make-dist: New shell script.
4791
4792         * configure: When creating foo from foo.in, make foo read-only to
4793         remind people to edit the .in file instead.
4794
4795         * INSTALL: Changed references to config.h-dist to config.h.in.
4796         The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4797         to build src/paths.h from src/paths.h.in; added a paragraph to do
4798         this.
4799         * configure, Makefile, build-install: Changed filenames like
4800         FOO-dist to FOO.in.
4801
4802 1992-04-08  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4803
4804         * Makefile, build-install: Renamed to Makefile.in and
4805         build-install.in; the configure script will edit these to produce
4806         the usable Makefile and build-install.
4807         * configure: Changed to produce ./Makefile, ./build-install,
4808         lib-src/Makefile, and src/Makefile from their *.in counterparts,
4809         instead of editing them in place.
4810
4811 1992-04-07  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4812
4813         * Makefile: Re-arranged so that the undumped Emacs will search
4814         ../lisp *after* the site's local elisp files.
4815         (locallisppath, dumplisppath): New variables.
4816         (lisppath): This variable's default value is now chosen based on
4817         $(locallisppath) and $(lispdir); while it used to be the
4818         customization point for adding site-local elisp directories to
4819         load-path, that job is now handled mostly by locallisppath.
4820         (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4821         Check the values being assigned to the *LOADSEARCH macros for null
4822         path elements (like '::' in 'foo::bar').
4823
4824         * configure: When checking if the machine- and system-dependent
4825         files define a particular macro or not, actually run them through
4826         CPP and test the macros with #ifs, instead of just grepping for
4827         the macros' names.  In particular, check for SYSTEM_MALLOC in this
4828         way.
4829
4830 1992-04-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
4831
4832         * Makefile (install): Don't use -s in install.  (Keep the symbols.)
4833
4834 1992-04-02  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4835
4836         * configure: Make the config.status file an executable shell
4837         script which will recreate the same configuration.  Include the
4838         verbal description of the current configuration as a comment in
4839         the script.
4840         * INSTALL: Doc fix.
4841
4842         * Makefile: brought the Makefile up to the GNU coding
4843         standards, as described in standards.text:
4844         (TAGS): New name for the target which rebuilds the tags table.
4845         (check): New target; doesn't do anything yet.
4846         (mostlyclean): New target, synonymous with clean.
4847         (realclean): New target.  Currently, this just calls the
4848         subdirectories's makefiles and then deletes config.status.
4849         (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4850         variables.
4851         Installation directory variables changed to conform.
4852         (install, install.sysv, install.xenix, install.aix): Changed the
4853         code which copies the directories into their installed location to
4854         allow the installed locations to be in several different
4855         directories; the old version assumed that they would all be in
4856         $(emacsdir).
4857         (mkdir, lockdir): Allow the installed locations to be in several
4858         different directories.
4859         * INSTALL: Doc fix.
4860
4861         * build-install: Use the same variable names as the Makefile.
4862         Allow the installed locations to be in several different
4863         directories.
4864
4865 1992-03-31  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4866
4867         * Makefile (src/paths.h): Instead of using a single sed command to
4868         edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4869         separately, and don't forget to append "/!!!SuperLock!!!" to the
4870         value of the PATH_SUPERLOCK macro.
4871
4872         * config.emacs: Renamed to configure, for consistency with other
4873         GNU products.  Internal references changed.
4874         INSTALL, Makefile: References changed.
4875
4876         * lock: New directory, which should always be empty.  If this
4877         directory doesn't exist, Emacs won't complain; it just won't lock.
4878         Having this here means that people can just unpack Emacs, build
4879         it, and have locking work.
4880
4881         * share-lib: Re-renamed to etc, for the sake of tradition.
4882         * config.emacs: Changed default value for datadir to ../etc.
4883         * INSTALL, README: Adjusted.
4884
4885 1992-03-18  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4886
4887         * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4888         by running CPP on the appropriate s/*.h and m/*.h files.
4889
4890 1992-03-16  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
4891
4892         * config.emacs: Make sure to set the "exit on error" flag once
4893         we've removed config.status; errors should abort the configuration.
4894
4895 1992-02-15  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
4896
4897         * config.emacs: Added -distribute option, so that the Makefile
4898         paths are in their proper form.  I don't know why this matters.
4899
4900 1992-02-14  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
4901
4902         * local-lisp: New directory, empty in the distribution, for people
4903         to put local elisp code in.
4904         * config.emacs: Include it in the default load path.
4905         * README: Document it.
4906
4907 1992-01-30  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
4908
4909         * config.emacs: Guess the type of signal handling functions based
4910         on the contents of /usr/include/signal.h.
4911
4912         * config.emacs: Print out progress report messages.
4913
4914         * Makefile (src/paths.h): Don't generically replace
4915         /usr/local/lib/emacs with LIBROOT.  This can hide bugs in the
4916         editing of the other entries, and each entry should be dealt with
4917         explicitly anyway.
4918
4919         * build-install: Converted from C-shell to Bourne shell.
4920         * config.emacs: Edit build-install properly.
4921
4922         * config.emacs: Doc fix.
4923
4924 1992-01-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
4925
4926         * Makefile (install): Remove `B' from tar xf command.
4927
4928 1992-01-13  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
4929
4930         * config.emacs: Removed support for the `maintain-environment'
4931         option; the only important difference between this and its absence
4932         has been removed.
4933         * INSTALL: Removed mention of `maintain-environment'.
4934
4935         * config.emacs: Fix arguments to sed when processing boolean
4936         arguments.
4937
4938 1991-12-05  Jim Blandy  (jimb at pogo.gnu.ai.mit.edu)
4939
4940         * config.emacs: New file, to help automate the installation
4941         process.
4942
4943         * Makefile: Lots of changes to support the separation of etc into
4944         architecture-dependent and -independent files:
4945         (EMACSROOT): New variable, giving the directory under which all of
4946         Emacs's libraries should be installed.  Changed rest of file to
4947         use it.
4948         (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4949         (DATADIR): New variable, denoting architecture-independent dir.
4950         (LOCKDIR): New variable, for completeness.
4951         (SUBDIR): No more etc, new lib-src.
4952         (COPYDIR): No more etc, new arch-lib and share-lib.
4953         (src/paths.h): Set PATH_DATA and the LOCK macros too.
4954         (src): Now depends on lib-src, not etc.
4955         * build-install: Changes parallel to the above.
4956         * README: Describe the new arrangement.
4957
4958         * vms: New subdirectory for all the VMS stuff.
4959
4960 1991-12-03  Jim Blandy  (jimb at pogo.gnu.ai.mit.edu)
4961
4962         * Makefile (LISPPATH): New variable.
4963         (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
4964
4965 1990-09-28  Richard Stallman  (rms at mole.ai.mit.edu)
4966
4967         * Makefile (install, install.sysv, install.xenix):
4968         Install wakeup instead of loadst.  No need for setuid or setgid.
4969
4970 1990-08-07  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
4971
4972         * Makefile (clean): Clean etc if that's not the installation dir.
4973
4974 1990-04-26  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
4975
4976         * Makefile (paths.h): Make sed alter each name in the path.
4977
4978 1988-08-30  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
4979
4980         * Makefile (install.sysv): Use cpio, not tar.
4981
4982 1988-08-03  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
4983
4984         * Makefile (lockdir): Rename `lock' target.
4985         Depend on it from install*, not from `all'.
4986
4987 1988-05-16  Richard Stallman  (rms at frosted-flakes.ai.mit.edu)
4988
4989         * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
4990         to match build-install and paths.h.
4991
4992 ;; Local Variables:
4993 ;; coding: iso-2022-7bit-unix
4994 ;; End: