-#include QMK_KEYBOARD_H
#include "drashna.h"
#include "analog.c"
#include "pointing_device.h"
#include "pincontrol.h"
-
#define KC_X0 LT(_FN, KC_ESC)
+// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
KC_VOLU, KC_MPLY, KC_MPRV, RESET,
),
};
+// clang-format on
// Joystick
// Set Pins
uint16_t lastCursor = 0;
int16_t axisCoordinate(uint8_t pin, uint16_t origin) {
- int8_t direction;
+ int8_t direction;
int16_t distanceFromOrigin;
int16_t range;
direction = 1;
}
- float percent = (float)distanceFromOrigin / range;
- int16_t coordinate = (int16_t)(percent * 100);
+ float percent = (float)distanceFromOrigin / range;
+ int16_t coordinate = (int16_t)(percent * 100);
if (coordinate < 0) {
return 0;
} else if (coordinate > 100) {
// place overrides here
#undef MATRIX_COL_PINS
-#define MATRIX_COL_PINS { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 }
+#define MATRIX_COL_PINS \
+ { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 }
#undef MATRIX_ROW_PINS
-#define MATRIX_ROW_PINS { B7, B1, B0 }
+#define MATRIX_ROW_PINS \
+ { B7, B1, B0 }
+
+#define RGB_DI_PIN B10
+#define RGBLED_NUM 15
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _FN1 1
-
-// Defines for task manager and such
-#define CALTDEL LCTL(LALT(KC_DEL))
-#define TSKMGR LCTL(LSFT(KC_ESC))
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,----------------------------------------------------------------------------. ,-------------.
- * | Q | W | E | R | T | Bksp | Y | U | I | O | P | | M1 | M2 |
- * |------+------+------+------+------+------+------+------+------+------+------+ |------+------|
- * | A | S | D | F | G | Enter| H | J | K | L | ; | | M3 | M4 |
- * |------+------+------+------+------+------+------+------+------+------+------+ |------+------|
- * | Z | X | C | V | B | FN1 | N | M | , | . | / | | M5 | M6 |
- * `----------------------------------------------------------------------------' `-------------'
- */
-[_QWERTY] = LAYOUT(
- KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_1, KC_2,
- KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_3, KC_4,
- KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_5, KC_6
-),
-
-/* FN1
- * ,----------------------------------------------------------------------------. ,-------------.
- * | 1 | 2 | 3 | 4 | 5 | Bksp | 6 | 7 | 8 | 9 | 0 | | M1 | M2 |
- * |------+------+------+------+------+------+------+------+------+------+------+ |------+------|
- * | 4 | 5 | 6 | + | | Enter| | | | | | | M3 | M4 |
- * |------+------+------+------+------+------+------+------+------+------+------+ |------+------|
- * | 7 | 8 | 9 | 0 | | FN1 | | | | | | | M5 | M6 |
- * `----------------------------------------------------------------------------' `-------------'
- */
-[_FN1] = LAYOUT(
- KC_1, KC_2, KC_3, KC_4, KC_5, KC_BSPC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_1, KC_2,
- KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT, _______, _______, _______, _______, _______, KC_3, KC_4,
- KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______, _______, _______, KC_5, KC_6
-),
-};
+#include "drashna.h"
+
+/*
+ * The `LAYOUT_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+// clang-format off
+#define LAYOUT_base( \
+ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+ K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+ K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
+ ) \
+ LAYOUT_wrapper( \
+ KC_ESC, K01, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, KC_DEL, \
+ ALT_T(KC_TAB), K11, K12, K13, K14, K15, KC_BSPC, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
+ KC_MLSF, CTL_T(K21), K22, K23, K24, LT(_LOWER,K25), KC_SPC, LT(_RAISE,K26), K27, K28, K29, RCTL_T(K2A), KC_ENT \
+ )
+#define LAYOUT_base_wrapper(...) LAYOUT_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = LAYOUT_base_wrapper(
+ _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+ _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+ _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+ ),
+
+ [_COLEMAK] = LAYOUT_base_wrapper(
+ _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+ _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+ _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+ ),
+
+ [_DVORAK] = LAYOUT_base_wrapper(
+ _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+ _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+ _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+ ),
+
+ [_WORKMAN] = LAYOUT_base_wrapper(
+ _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+ _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+ _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+ ),
+
+ [_NORMAN] = LAYOUT_base_wrapper(
+ _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
+ _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
+ _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
+ ),
+
+ [_MALTRON] = LAYOUT_base_wrapper(
+ _________________MALTRON_L1________________, _________________MALTRON_R1________________,
+ _________________MALTRON_L2________________, _________________MALTRON_R2________________,
+ _________________MALTRON_L3________________, _________________MALTRON_R3________________
+ ),
+
+ [_EUCALYN] = LAYOUT_base_wrapper(
+ _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
+ _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
+ _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
+ ),
+
+ [_CARPLAX] = LAYOUT_base_wrapper(
+ _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
+ _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
+ _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
+ ),
+
+ [_MODS] = LAYOUT_wrapper(
+ _______, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______,
+ _______, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______,
+ KC_LSFT, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______
+ ),
+
+ [_LOWER] = LAYOUT_wrapper(
+ KC_TILD, _________________LOWER_L1__________________, _______, _________________LOWER_R1__________________, KC_BSPC,
+ KC_DEL, _________________LOWER_L2__________________, _______, _________________LOWER_R2__________________, KC_PIPE,
+ _______, _________________LOWER_L3__________________, _______, _________________LOWER_R3__________________, _______
+ ),
+
+ [_RAISE] = LAYOUT_wrapper(
+ KC_GRV, _________________RAISE_L1__________________, _______, _________________RAISE_R1__________________, KC_BSPC,
+ KC_DEL, _________________RAISE_L2__________________, _______, _________________RAISE_R2__________________, KC_BSLS,
+ _______, _________________RAISE_L3__________________, _______, _________________RAISE_R3__________________, _______
+ ),
+
+ [_ADJUST] = LAYOUT_wrapper(
+ KC_MAKE, _________________ADJUST_L1_________________, KC_NUKE, _________________ADJUST_R1_________________, KC_RST,
+ VRSN, _________________ADJUST_L2_________________, MG_NKRO, _________________ADJUST_R2_________________, EEP_RST,
+ TG_MODS, _________________ADJUST_L3_________________, KC_RGB_T,_________________ADJUST_R3_________________, RGB_IDL
+ )
+};
+// clang-format on
UNICODE_ENABLE = yes # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = yes # Audio output on port C6
-RGBLIGHT_ENABLE = no # RGB Enable / Disable
+RGBLIGHT_ENABLE = yes # RGB Enable / Disable
+
+RGBLIGHT_STARTUP_ANIMATION = yes
#pragma once
#ifdef __AVR__
-
#include <avr/pgmspace.h>
+
# include <avr/pgmspace.h>
#elif defined(ESP8266)
#else
- #define PROGMEM
+# define PROGMEM
#endif
// Corne 8x6 font with QMK Firmware Logo
// Online editor: https://helixfonteditor.netlify.com/
+// clang-format off
const unsigned char font[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
-#include QMK_KEYBOARD_H
#include "drashna.h"
-extern keymap_config_t keymap_config;
-extern uint8_t is_master;
+extern uint8_t is_master;
#ifdef RGBLIGHT_ENABLE
// Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
#ifdef OLED_DRIVER_ENABLE
-static uint32_t oled_timer = 0;
-static char keylog_str[6] = {};
-static uint16_t log_timer = 0;
+# define KEYLOGGER_LENGTH 5
+static uint32_t oled_timer = 0;
+static char keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"};
+static uint16_t log_timer = 0;
+// clang-format off
static const char PROGMEM code_to_name[0xFF] = {
// 0 1 2 3 4 5 6 7 8 9 A B c D E F
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', // 0x
enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE };
-// clang-format off
+/*
+ * The `LAYOUT_crkbd_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+
#define LAYOUT_crkbd_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
keycode = 0;
}
- for (uint8_t i = 4; i > 0; --i) {
+ for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) {
keylog_str[i] = keylog_str[i - 1];
}
void update_log(void) {
if (timer_elapsed(log_timer) > 750) {
- //add_keylog(0);
+ // add_keylog(0);
}
}
void render_default_layer_state(void) {
oled_write_P(PSTR("Lyout"), false);
- switch (biton32(default_layer_state)) {
+ switch (get_highest_layer(default_layer_state)) {
case _QWERTY:
oled_write_P(PSTR(" QRTY"), false);
break;
/* Show Keyboard Layout */
render_default_layer_state();
render_layer_state();
- render_mod_status(get_mods()|get_oneshot_mods());
+ render_mod_status(get_mods() | get_oneshot_mods());
render_keylogger_status();
}
oled_off();
return;
}
-#ifndef SPLIT_KEYBOARD
- else { oled_on(); }
-#endif
+# ifndef SPLIT_KEYBOARD
+ else {
+ oled_on();
+ }
+# endif
update_log();
if (is_master) {
#ifdef RGB_MATRIX_ENABLE
-void suspend_power_down_keymap(void) {
- rgb_matrix_set_suspend_state(true);
-}
+void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); }
-void suspend_wakeup_init_keymap(void) {
- rgb_matrix_set_suspend_state(false);
-}
+void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); }
void check_default_layer(uint8_t mode, uint8_t type) {
- switch (biton32(default_layer_state)) {
+ switch (get_highest_layer(default_layer_state)) {
case _QWERTY:
rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type);
break;
rgb_matrix_config.enable
# endif
) {
- switch (biton32(layer_state)) {
+ switch (get_highest_layer(layer_state)) {
case _GAMEPAD:
rgb_matrix_layer_helper(HSV_ORANGE, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
break;
-/* Good on you for modifying your layout! if you don't have
- * time to read the QMK docs, a list of keycodes can be found at
- *
- * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
- *
- * There's also a template for adding new layers at the bottom of this file!
- */
-
-#include QMK_KEYBOARD_H
#include "drashna.h"
+/*
+ * The `LAYOUT_gergo_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
// clang-format off
#define LAYOUT_gergo_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
) \
LAYOUT_gergo_wrapper( \
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_PIPE, \
- KC_TAB, K11, K12, K13, K14, K15, _______, _______, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
+ LALT_T(KC_TAB), K11, K12, K13, K14, K15, _______, _______, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
OS_LSFT, CTL_T(K21), K22, K23, K24, K25, _______, _______, _______, _______, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \
KC_GRV, KC_SPC, BK_LWER, OS_LALT, OS_RGUI, DL_RAIS, KC_ENT, _______ \
)
# undef RGBLED_NUM
# define RGBLED_NUM 18 // Number of LEDs
# undef RGBLED_SPLIT
-# define RGBLED_SPLIT { 9, 9 }
+# define RGBLED_SPLIT \
+ { 9, 9 }
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-
-#include QMK_KEYBOARD_H
#include "drashna.h"
+/*
+ * The `LAYOUT_iris_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+
// clang-format off
#define LAYOUT_iris_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
) \
LAYOUT_wrapper( \
KC_ESC, ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________, KC_MINS, \
- KC_TAB , K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSLS, \
- KC_C1R3, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
+ LALT_T(KC_TAB), K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSLS, \
+ KC_C1R3, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
OS_LSFT, CTL_T(K21), K22, K23, K24, K25, OS_LALT, OS_RGUI, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \
KC_GRV, KC_SPC, LT(_LOWER,KC_BSPC), LT(_RAISE,KC_DEL), KC_ENT, RAISE \
)
#define MATRIX_ROWS 5
#ifdef RGBLIGHT_ENABLE
-# undef RGBLED_NUM
-# define RGBLED_NUM 16
-
-# define RGBLIGHT_HUE_STEP 8
-# define RGBLIGHT_SAT_STEP 8
-# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
-#endif // RGBLIGHT_ENABLE
-
-
+# undef RGBLED_NUM
+# define RGBLED_NUM 16
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 8
+# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+#endif // RGBLIGHT_ENABLE
#undef PRODUCT
-#define PRODUCT Drashnas Viterbi Macro Pad
+#define PRODUCT Drashnas Viterbi Macro Pad
#ifdef AUDIO_ENABLE
-# define C6_AUDIO
-# define NO_MUSIC_MODE
+# define C6_AUDIO
+# define NO_MUSIC_MODE
#endif
+// clang-format off
#define LAYOUT_ortho_5x7( \
L00, L01, L02, L03, L04, L05, L06, \
L10, L11, L12, L13, L14, L15, L16, \
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ L40, L41, L42, L43, L44, L45, L46 }, \
}
+// clang-format on
-#define QMK_ESC_OUTPUT F5 // usually COL
-#define QMK_ESC_INPUT D4 // usually ROW
+#define QMK_ESC_OUTPUT F5 // usually COL
+#define QMK_ESC_INPUT D4 // usually ROW
#define QMK_LED B0
#define QMK_SPEAKER C6
-#include QMK_KEYBOARD_H
#include "drashna.h"
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-
// Fillers to make layering more clear
-#define DIABLO TG(_DIABLO)
-#define GAMEPAD TG(_GAMEPAD)
-#define MEDIA TT(_MEDIA)
+#define DIABLO TG(_DIABLO)
+#define GAMEPAD TG(_GAMEPAD)
+#define MEDIA TT(_MEDIA)
-
-//enum more_custom_keycodes {
+// enum more_custom_keycodes {
// KC_P00 = NEW_SAFE_RANGE
//};
+// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NUMLOCK] = LAYOUT_ortho_5x7(
};
-
-
+// clang-format on
bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-
- //switch (keycode) {
- //case KC_P00:
- // if (!record->event.pressed) {
- // tap(KC_KP_0);
- // tap(KC_KP_0);
- // }
- // return false;
- // break;
- //}
- return true;
+ // switch (keycode) {
+ // case KC_P00:
+ // if (!record->event.pressed) {
+ // tap(KC_KP_0);
+ // tap(KC_KP_0);
+ // }
+ // return false;
+ // break;
+ //}
+ return true;
}
-
-
-
void matrix_init_keymap(void) {
- #ifndef CONVERT_TO_PROTON_C
+#ifndef CONVERT_TO_PROTON_C
setPinOutput(D5);
writePinHigh(D5);
setPinOutput(B0);
writePinHigh(B0);
- #endif
+#endif
}
--- /dev/null
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define EE_HANDS
+
+#ifdef OLED_DRIVER_ENABLE
+# define OLED_DISPLAY_128X64
+# define OLED_FONT_H "font_gmk_bad.h"
+# define OLED_DISABLE_TIMEOUT
+# define OLED_SCROLL_TIMEOUT_RIGHT 60000
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+# define RGBLIGHT_SLEEP
+# define RGBLIGHT_LIMIT_VAL 200
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 8
+#endif
+
+// If you are using an Elite C rev3 on the slave side, uncomment the lines below:
+#define SPLIT_USB_DETECT
+#define SPLIT_USB_TIMEOUT 1000
--- /dev/null
+#include "drashna.h"
+
+uint8_t is_master;
+
+#ifdef OLED_DRIVER_ENABLE
+# define KEYLOGGER_LENGTH 10
+static uint32_t oled_timer = 0;
+static char keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"};
+static uint16_t log_timer = 0;
+// clang-format off
+static const char PROGMEM code_to_name[0xFF] = {
+// 0 1 2 3 4 5 6 7 8 9 A B c D E F
+ ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', // 0x
+ 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', // 1x
+ '3', '4', '5', '6', '7', '8', '9', '0', 20, 19, 27, 26, 22, '-', '=', '[', // 2x
+ ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ', // 3x
+ ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ', 16, ' ', ' ', ' ', // 4x
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 5x
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 6x
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 7x
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 8x
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 9x
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ax
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Bx
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Cx
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Dx
+ 'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ex
+ ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ' // Fx
+};
+
+void add_keylog(uint16_t keycode);
+#endif
+
+#ifndef UNICODE_ENABLE
+# define UC(x) KC_NO
+#endif
+
+/*
+ * The `LAYOUT_kyria_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+
+// clang-format off
+#define LAYOUT_kyria_base( \
+ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+ K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+ K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
+ ) \
+ LAYOUT_wrapper( \
+ KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \
+ LALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
+ OS_LSFT, CTL_T(K21), K22, K23, K24, K25, KC_NO, KC_NO, KC_NO, KC_NO, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \
+ KC_MUTE, OS_LALT, KC_GRV, KC_SPC, BK_LWER, DL_RAIS, KC_ENT, OS_RGUI, UC(0x03A8), UC(0x2E2E) \
+ )
+/* Re-pass though to allow templates to be used */
+#define LAYOUT_kyria_base_wrapper(...) LAYOUT_kyria_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = LAYOUT_kyria_base_wrapper(
+ _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+ _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+ _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+ ),
+
+ [_COLEMAK] = LAYOUT_kyria_base_wrapper(
+ _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+ _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+ _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+ ),
+
+ [_DVORAK] = LAYOUT_kyria_base_wrapper(
+ _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+ _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+ _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+ ),
+
+ [_WORKMAN] = LAYOUT_kyria_base_wrapper(
+ _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+ _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+ _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+ ),
+
+ [_NORMAN] = LAYOUT_kyria_base_wrapper(
+ _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
+ _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
+ _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
+ ),
+
+ [_MALTRON] = LAYOUT_kyria_base_wrapper(
+ _________________MALTRON_L1________________, _________________MALTRON_R1________________,
+ _________________MALTRON_L2________________, _________________MALTRON_R2________________,
+ _________________MALTRON_L3________________, _________________MALTRON_R3________________
+ ),
+
+ [_EUCALYN] = LAYOUT_kyria_base_wrapper(
+ _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
+ _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
+ _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
+ ),
+
+ [_CARPLAX] = LAYOUT_kyria_base_wrapper(
+ _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
+ _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
+ _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
+ ),
+ [_MODS] = LAYOUT_wrapper(
+ _______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
+ _______, ___________________BLANK___________________, ___________________BLANK___________________, _______,
+ KC_LSFT, ___________________BLANK___________________, _______, _______, _______, _______, ___________________BLANK___________________, KC_RSFT,
+ _______, _______, KC_LALT, _______, _______, _______, _______, KC_RGUI, _______, _______
+ ),
+ [_LOWER] = LAYOUT_wrapper(
+ KC_F12, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11,
+ _______, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE,
+ _______, _________________LOWER_L3__________________, _______, _______, _______, _______, _________________LOWER_R3__________________, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_RAISE] = LAYOUT_wrapper(
+ KC_F12, _________________RAISE_L1__________________, _________________RAISE_R1__________________, KC_F11,
+ _______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS,
+ _______, _________________RAISE_L3__________________, _______, _______, _______, _______, _________________RAISE_R3__________________, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_ADJUST] = LAYOUT_wrapper(
+ KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
+ VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
+ _______, _________________ADJUST_L3_________________, HPT_TOG, HPT_FBK, MG_NKRO, UC_MOD, _________________ADJUST_R3_________________, TG_MODS,
+ _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, _______
+ ),
+// [_LAYERINDEX] = LAYOUT_wrapper(
+// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+// ),
+};
+// clang-format on
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+#ifdef OLED_DRIVER_ENABLE
+ oled_timer = timer_read32();
+ add_keylog(keycode);
+#endif
+#ifndef SPLIT_KEYBOARD
+ if (keycode == RESET && !is_master) {
+ return false;
+ }
+#endif
+ }
+ return true;
+}
+void matrix_init_keymap(void) { is_master = (uint8_t)is_keyboard_master(); }
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; }
+
+void add_keylog(uint16_t keycode) {
+ if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX) || (keycode >= QK_MODS && keycode <= QK_MODS_MAX)) {
+ keycode = keycode & 0xFF;
+ } else if (keycode > 0xFF) {
+ keycode = 0;
+ }
+
+ for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) {
+ keylog_str[i] = keylog_str[i - 1];
+ }
+
+ if (keycode < (sizeof(code_to_name) / sizeof(char))) {
+ keylog_str[0] = pgm_read_byte(&code_to_name[keycode]);
+ }
+
+ log_timer = timer_read();
+}
+
+void update_log(void) {
+ if (timer_elapsed(log_timer) > 750) {
+ // add_keylog(0);
+ }
+}
+
+void render_keylogger_status(void) {
+ oled_write_P(PSTR("Keylogger: "), false);
+ oled_write(keylog_str, false);
+}
+
+void render_default_layer_state(void) {
+ oled_write_P(PSTR("Layout: "), false);
+ switch (get_highest_layer(default_layer_state)) {
+ case _QWERTY:
+ oled_write_ln_P(PSTR("Qwerty "), false);
+ break;
+ case _COLEMAK:
+ oled_write_ln_P(PSTR("Colemak"), false);
+ break;
+ case _DVORAK:
+ oled_write_ln_P(PSTR("Dvorak"), false);
+ break;
+ case _WORKMAN:
+ oled_write_ln_P(PSTR("Workman"), false);
+ break;
+ case _NORMAN:
+ oled_write_ln_P(PSTR("Norman"), false);
+ break;
+ case _MALTRON:
+ oled_write_ln_P(PSTR("Maltron"), false);
+ break;
+ case _EUCALYN:
+ oled_write_ln_P(PSTR("Eucalyn"), false);
+ break;
+ case _CARPLAX:
+ oled_write_ln_P(PSTR("Carplax"), false);
+ break;
+ }
+}
+
+void render_layer_state(void) {
+ oled_write_ln_P(PSTR("Layer:"), false);
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("Lower"), layer_state_is(_LOWER));
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("Raise"), layer_state_is(_RAISE));
+ oled_write_P(PSTR(" "), false);
+ oled_write_ln_P(PSTR("Mods"), layer_state_is(_MODS));
+}
+
+void render_keylock_status(uint8_t led_usb_state) {
+ oled_write_P(PSTR("Lock: "), false);
+ oled_write_P(PSTR("NUM"), led_usb_state & (1 << USB_LED_NUM_LOCK));
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("CAPS"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+ oled_write_P(PSTR(" "), false);
+ oled_write_ln_P(PSTR("SCL"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+}
+
+void render_mod_status(uint8_t modifiers) {
+ oled_write_P(PSTR("Mods: "), false);
+ oled_write_P(PSTR("Sft"), (modifiers & MOD_MASK_SHIFT));
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("Ctl"), (modifiers & MOD_MASK_CTRL));
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("Alt"), (modifiers & MOD_MASK_ALT));
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("GUI"), (modifiers & MOD_MASK_GUI));
+}
+
+void render_bootmagic_status(void) {
+ /* Show Ctrl-Gui Swap options */
+ static const char PROGMEM logo[][2][3] = {
+ {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+ {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+ };
+ oled_write_P(PSTR("Boot "), false);
+ oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui);
+ oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui);
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("NKRO"), keymap_config.nkro);
+ oled_write_P(PSTR(" "), false);
+ oled_write_ln_P(PSTR("GUI"), !keymap_config.no_gui);
+ oled_write_P(PSTR("Magic "), false);
+ oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui);
+ oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui);
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("GRV"), keymap_config.swap_grave_esc);
+ oled_write_P(PSTR(" "), false);
+ oled_write_ln_P(PSTR("CAPS"), keymap_config.swap_control_capslock);
+}
+
+void render_user_status(void) {
+ oled_write_P(PSTR("USER: "), false);
+ oled_write_P(PSTR("Anim"), userspace_config.rgb_matrix_idle_anim);
+ oled_write_P(PSTR(" "), false);
+ oled_write_P(PSTR("Layr"), userspace_config.rgb_layer_change);
+ oled_write_P(PSTR(" "), false);
+ oled_write_ln_P(PSTR("Nuke"), userspace_config.nuke_switch);
+}
+
+// clang-format off
+void render_logo(void) {
+ static const char PROGMEM qmk_logo[] = {
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+ oled_write_P(qmk_logo, false);
+}
+
+# ifndef SPLIT_TRANSPORT_MIRROR
+void render_kyria_logo(void) {
+ static const char PROGMEM kyria_logo[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,192,224,240,124, 62, 31, 15, 7, 3, 1,128,192,224,240,120, 56, 60, 28, 30, 14, 14, 7, 7,135,231,127, 31,255,255, 31,127,231,135, 7, 7, 14, 14, 30, 28, 60, 56,120,240,224,192,128, 1, 3, 7, 15, 31, 62,124,240,224,192, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0,240,252,255, 31, 7, 1, 0, 0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135, 1, 0, 0,255,255, 0, 0, 1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192, 0, 0, 1, 7, 31,255,252,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,254,255,255, 1, 1, 7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30, 7, 1, 1,255,255,254, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0,255,255, 0, 0,192,192, 48, 48, 0, 0,240,240, 0, 0, 0, 0, 0, 0,240,240, 0, 0,240,240,192,192, 48, 48, 48, 48,192,192, 0, 0, 48, 48,243,243, 0, 0, 0, 0, 0, 0, 48, 48, 48, 48, 48, 48,192,192, 0, 0, 0, 0, 0,
+ 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31, 7,255,255, 7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0, 63, 63, 3, 3, 12, 12, 48, 48, 0, 0, 0, 0, 51, 51, 51, 51, 51, 51, 15, 15, 0, 0, 63, 63, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 48, 48, 63, 63, 48, 48, 0, 0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 15, 63,255,248,224,128, 0, 0, 3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128, 0, 0,255,255, 0, 0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15, 3, 0, 0,128,224,248,255, 63, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 62,124,248,240,224,192,128, 1, 3, 7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15, 7, 3, 1,128,192,224,240,248,124, 62, 15, 7, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 3, 7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15, 7, 3, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+ };
+ oled_write_raw_P(kyria_logo, sizeof(kyria_logo));
+}
+# endif
+// clang-format on
+
+void render_status_main(void) {
+ /* Show Keyboard Layout */
+ render_default_layer_state();
+ render_keylock_status(host_keyboard_leds());
+ render_bootmagic_status();
+ render_user_status();
+
+ render_keylogger_status();
+}
+
+void render_status_secondary(void) {
+ /* Show Keyboard Layout */
+ render_logo();
+ render_default_layer_state();
+ render_layer_state();
+ render_mod_status(get_mods() | get_oneshot_mods());
+
+ render_keylogger_status();
+}
+
+void oled_task_user(void) {
+ if (timer_elapsed32(oled_timer) > 30000) {
+ oled_off();
+ return;
+ }
+# ifndef SPLIT_KEYBOARD
+ else {
+ oled_on();
+ }
+# endif
+
+ update_log();
+ if (is_master) {
+ render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+ } else {
+# ifdef SPLIT_TRANSPORT_MIRROR
+ render_status_secondary();
+# else
+ render_kyria_logo();
+# endif
+ }
+}
+
+#endif
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) {
+ // Volume control
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else if (index == 1) {
+ // Page up/Page down
+ if (clockwise) {
+ tap_code(KC_PGDN);
+ } else {
+ tap_code(KC_PGUP);
+ }
+ }
+}
+#endif
--- /dev/null
+OLED_DRIVER_ENABLE = yes # Enables the use of OLED displays
+ENCODER_ENABLE = yes # ENables the use of one or more encoders
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+RGBLIGHT_STARTUP_ANIMATION = yes
+
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support
+UNICODE_ENABLE = yes # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs
+
+BOOTLOADER = atmel-dfu
+
+SPLIT_TRANSPORT = mirror
/* key combination for magic key command */
#undef IS_COMMAND
-#define IS_COMMAND() ( \
- get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)) \
-)
+#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)))
#ifdef RGBLIGHT_ENABLE
-# define RGB_DI_PIN D3
-# define RGBLED_NUM 16 // Number of LEDs
-# define RGBLED_SPLIT { 8, 8 }
-
-# define RGBLIGHT_HUE_STEP 12
-# define RGBLIGHT_SAT_STEP 12
-# define RGBLIGHT_VAL_STEP 12
-# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
-#endif // RGBLIGHT_ENABLE
+# define RGB_DI_PIN D3
+# define RGBLED_NUM 16 // Number of LEDs
+# define RGBLED_SPLIT \
+ { 8, 8 }
+
+# define RGBLIGHT_HUE_STEP 12
+# define RGBLIGHT_SAT_STEP 12
+# define RGBLIGHT_VAL_STEP 12
+# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+#endif // RGBLIGHT_ENABLE
#ifdef AUDIO_ENABLE
-# define C6_AUDIO
-# ifdef RGBLIGHT_ENABLE
-# define NO_MUSIC_MODE
-# endif
-#endif //AUDIO_ENABLE
+# define C6_AUDIO
+# ifdef RGBLIGHT_ENABLE
+# define NO_MUSIC_MODE
+# endif
+#endif // AUDIO_ENABLE
#undef PRODUCT
#ifdef KEYBOARD_orthodox_rev1
-# define PRODUCT Drashna Hacked Orthodox Rev.1
+# define PRODUCT Drashna Hacked Orthodox Rev .1
#elif KEYBOARD_orthodox_rev3
-# define PRODUCT Drashna Hacked Orthodox Rev.3
+# define PRODUCT Drashna Hacked Orthodox Rev .3
#endif
-#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_OUTPUT D7 // usually COL
#ifdef KEYBOARD_orthodox_rev1
-# define QMK_ESC_INPUT D4 // usually ROW
+# define QMK_ESC_INPUT D4 // usually ROW
#else
-# define QMK_ESC_INPUT D2 // usually ROW
+# define QMK_ESC_INPUT D2 // usually ROW
#endif
#define QMK_LED B0
#define QMK_SPEAKER C6
-/*
-This is the keymap for the keyboard
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-Copyright 2017 Art Ortenburger
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
#include "drashna.h"
-#ifdef INDICATOR_LIGHTS
-extern userspace_config_t userspace_config;
-
-uint8_t last_mod;
-uint8_t last_led;
-uint8_t last_osm;
-#endif
-
+/*
+ * The `LAYOUT_orthodox_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
// clang-format off
#define LAYOUT_orthodox_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
) \
LAYOUT_wrapper( \
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSPC, \
- KC_TAB, ALT_T(K11), K12, K13, K14, K15, OS_LALT, OS_LGUI, OS_RALT, RAISE, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
+ LALT_T(KC_TAB), K11, K12, K13, K14, K15, OS_LALT, OS_LGUI, OS_RALT, RAISE, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
KC_MLSF, CTL_T(K21), K22, K23, K24, K25, LOWER, KC_SPACE,KC_BSPC, KC_DEL, KC_ENT, RAISE, K26, K27, K28, K29, RCTL_T(K2A), KC_MRSF \
)
#define LAYOUT_orthodox_base_wrapper(...) LAYOUT_orthodox_base(__VA_ARGS__)
#pragma once
#ifdef RGBLIGHT_ENABLE
-# undef RGBLIGHT_SAT_STEP
-# define RGBLIGHT_SAT_STEP 12
-
-# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3
-# define RGBLIGHT_EFFECT_SNAKE_LENGTH 3
-#endif // RGBLIGHT_ENABLE
+# undef RGBLIGHT_SAT_STEP
+# define RGBLIGHT_SAT_STEP 12
+# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3
+# define RGBLIGHT_EFFECT_SNAKE_LENGTH 3
+#endif // RGBLIGHT_ENABLE
#undef PRODUCT
-#define PRODUCT DrashnaDox - Hacked ErgoDox EZ Shine
+#define PRODUCT DrashnaDox - Hacked ErgoDox EZ Shine
#undef DEBOUNCE
#define DEBOUNCE 30
#define TAPPING_TERM_PER_KEY
+
+#define ERGODOX_LED_30
-/*
-This is the keymap for the keyboard
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-Copyright 2017 Art Ortenburger
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include QMK_KEYBOARD_H
#include "drashna.h"
#ifdef UNICODEMAP_ENABLE
// define layer change stuff for underglow indicator
bool skip_leds = false;
+/*
+ * The `LAYOUT_ergodox_pretty_base` macro is a template to allow the use of
+ * identical modifiers for the default layouts (eg QWERTY, Colemak, Dvorak,
+ * etc), so that there is no need to set them up for each layout, and modify
+ * all of them if I want to change them. This helps to keep consistency and
+ * ease of use. K## is a placeholder to pass through the individual keycodes
+ */
// clang-format off
#define LAYOUT_ergodox_pretty_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
) \
LAYOUT_ergodox_pretty_wrapper( \
KC_ESC, ________________NUMBER_LEFT________________, UC_FLIP, UC_TABL, ________________NUMBER_RIGHT_______________, KC_MINS, \
- KC_TAB, K01, K02, K03, K04, K05, TG(_DIABLO), TG(_DIABLO), K06, K07, K08, K09, K0A, KC_BSLS, \
- KC_C1R3, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
+ LALT_T(KC_TAB), K01, K02, K03, K04, K05, TG(_DIABLO), TG(_DIABLO), K06, K07, K08, K09, K0A, KC_BSLS, \
+ KC_C1R3, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
KC_MLSF, CTL_T(K21), K22, K23, K24, K25, TG(_GAMEPAD), TG(_GAMEPAD), K26, K27, K28, K29, RCTL_T(K2A), KC_MRSF, \
KC_GRV, OS_MEH, OS_HYPR, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, UC(0x2E2E), \
OS_LALT, OS_LGUI, OS_RGUI, CTL_T(KC_ESCAPE), \
rgb_matrix_config.enable
# endif
) {
- switch (biton32(layer_state)) {
+ switch (get_highest_layer(layer_state)) {
case _GAMEPAD:
rgb_matrix_layer_helper(HSV_ORANGE, 1, rgb_matrix_config.speed, LED_FLAG_MODIFIER);
rgb_matrix_set_color(32, 0x00, 0xFF, 0x00); // Q
break;
default: {
bool mods_enabled = IS_LAYER_ON(_MODS);
- switch (biton32(default_layer_state)) {
+ switch (get_highest_layer(default_layer_state)) {
case _QWERTY:
rgb_matrix_layer_helper(HSV_CYAN, mods_enabled, rgb_matrix_config.speed, LED_FLAG_MODIFIER);
break;
#endif // RGB_MATRIX_INIT
-
uint16_t get_tapping_term(uint16_t keycode) {
if (keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) {
if (mod_config(keycode & 0xf) & MOD_MASK_ALT) {
COMMAND_ENABLE = no # Commands for debug and configuration
SPACE_CADET_ENABLE = no
ifeq ($(strip $(KEYBOARD)), ergodox_ez)
- RGBLIGHT_ENABLE = yes
- RGB_MATRIX_ENABLE = no
+ RGBLIGHT_ENABLE = yes
+ RGB_MATRIX_ENABLE = no
endif
CONSOLE_ENABLE = no
BOOTMAGIC_ENABLE = yes
-#pragma once
-
-// #define B6_AUDIO
-
-#if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM)
-# define RGB_DI_PIN B1
-# define RGBLED_NUM 16 // Number of LEDs
-
-# define RGBLIGHT_HUE_STEP 12
-# define RGBLIGHT_SAT_STEP 12
-# define RGBLIGHT_VAL_STEP 12
-# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
-#endif // RGBLIGHT_ENABLE
-
-#if defined(KEYBOARD_primekb_prime_m)
-# undef PRODUCT
-# define PRODUCT Drashna Hacked Prime_M Macro Pad
-#endif
+#pragma once
+
+// #define B6_AUDIO
+
+#if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM)
+# define RGB_DI_PIN B1
+# define RGBLED_NUM 16 // Number of LEDs
+
+# define RGBLIGHT_HUE_STEP 12
+# define RGBLIGHT_SAT_STEP 12
+# define RGBLIGHT_VAL_STEP 12
+# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+#endif // RGBLIGHT_ENABLE
+
+#if defined(KEYBOARD_primekb_prime_m)
+# undef PRODUCT
+# define PRODUCT Drashna Hacked Prime_M Macro Pad
+#endif
-#include QMK_KEYBOARD_H
#include "drashna.h"
#define F2_MCRO LT(_GAMEPAD, KC_F2)
#pragma once
#if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM)
-# define RGB_DI_PIN A0
-# define RGBLED_NUM 13 // Number of LEDs
-# define RGBLIGHT_ANIMATIONS
+# if defined(KEYBOARD_planck_light)
+# define RGB_DI_PIN A0
+# define RGBLED_NUM 13 // Number of LEDs
+# endif
# define RGBLIGHT_HUE_STEP 12
# define RGBLIGHT_SAT_STEP 12
# define RGBLIGHT_VAL_STEP 12
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
# undef RGB_MATRIX_LED_PROCESS_LIMIT
# undef RGB_MATRIX_LED_FLUSH_LIMIT
+# ifdef KEYBOARD_planck_rev6
+# define DRIVER_LED_TOTAL RGBLED_NUM
+# endif
#endif
#if defined(KEYBOARD_lets_split_rev2)
#if !defined(KEYBOARD_planck_light)
# ifdef RGBLIGHT_ENABLE
# define NO_MUSIC_MODE
-# endif // RGBLIGHT_ENABLE
+# endif // RGBLIGHT_ENABLE
#else
# undef QMK_ESC_OUTPUT
# define QMK_ESC_OUTPUT E6 // usually COL
# undef QMK_SPEAKER
# define QMK_SPEAKER B5
# define SOLENOID_PIN A1
-#endif // KEYBOARD_planck_light
+#endif // KEYBOARD_planck_light
#if defined(KEYBOARD_planck)
# undef PRODUCT
# endif
#endif
+#define ENCODER_DIRECTION_FLIP
/*
* MIDI options
*/
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 2
-#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
-#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
+#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* default 3V ERM vibration motor voltage and library*/
#if FB_ERM_LRA == 0
-#define RATED_VOLTAGE 3
-#define V_RMS 2.3
-#define V_PEAK 3.30
+# define RATED_VOLTAGE 3
+# define V_RMS 2.3
+# define V_PEAK 3.30
/* Library Selection */
-#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+# define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
/* default 2V LRA voltage and library */
#elif FB_ERM_LRA == 1
-#define RATED_VOLTAGE 2
-#define V_RMS 2.0
-#define V_PEAK 2.85
-#define F_LRA 200
+# define RATED_VOLTAGE 2
+# define V_RMS 2.0
+# define V_PEAK 2.85
+# define F_LRA 200
/* Library Selection */
-#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+# define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
#endif
-/* Copyright 2015-2017 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
#include "drashna.h"
#ifdef RGBLIGHT_ENABLE
# define PLNK_4 ET_RAIS
#endif
+/*
+ * The `LAYOUT_ortho_4x12_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
// clang-format off
#define LAYOUT_ortho_4x12_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
) \
LAYOUT_ortho_4x12_wrapper( \
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_DEL, \
- KC_TAB, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
+ LALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \
KC_MLSF, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, RCTL_T(K2A), KC_ENT, \
BACKLIT, OS_LCTL, OS_LALT, OS_LGUI, PLNK_1, PLNK_2, PLNK_3, PLNK_4, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
)
#ifdef KEYBOARD_planck_ez
case TH_LVL:
if (record->event.pressed) {
- keyboard_config.led_level++;
- if (keyboard_config.led_level > 4) {
+ keyboard_config.led_level++;
+ if (keyboard_config.led_level > 4) {
keyboard_config.led_level = 0;
- }
- planck_ez_right_led_level((uint8_t)keyboard_config.led_level * 255 / 4 );
- planck_ez_left_led_level((uint8_t)keyboard_config.led_level * 255 / 4 );
- eeconfig_update_kb(keyboard_config.raw);
- layer_state_set_kb(layer_state);
+ }
+ planck_ez_right_led_level((uint8_t)keyboard_config.led_level * 255 / 4);
+ planck_ez_left_led_level((uint8_t)keyboard_config.led_level * 255 / 4);
+ eeconfig_update_kb(keyboard_config.raw);
+ layer_state_set_kb(layer_state);
}
break;
#endif
#ifdef RGB_MATRIX_ENABLE
+# ifdef KEYBOARD_planck_rev6
+// clang-format off
+led_config_t g_led_config = {
+ {
+ // Key Matrix to LED Index
+ { NO_LED, 6, NO_LED, NO_LED, 5, NO_LED },
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 0 },
+ { NO_LED, 7, NO_LED, NO_LED, 2, NO_LED },
+ { NO_LED, 4, NO_LED, NO_LED, 3, NO_LED },
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+ { NO_LED, 1, NO_LED, NO_LED, 8, NO_LED }
+ }, {
+ // LED Index to Physical Position
+ {112, 39}, {148, 60}, {206, 53}, {206, 3}, {150, 3}, {74, 3}, {18, 3}, {18, 54}, {77, 60}
+ }, {
+ // LED Index to Flag
+ LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL,
+ LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL
+ }
+};
+// clange-format on
+# endif
+
// clang-format off
void suspend_power_down_keymap(void) {
rgb_matrix_set_suspend_state(true);
rgb_matrix_config.enable
# endif
) {
- switch (biton32(layer_state)) {
+ switch (get_highest_layer(layer_state)) {
case _GAMEPAD:
rgb_matrix_layer_helper(HSV_ORANGE, 1, rgb_matrix_config.speed, LED_FLAG_MODIFIER);
break;
break;
default: {
bool mods_enabled = IS_LAYER_ON(_MODS);
- switch (biton32(default_layer_state)) {
+ switch (get_highest_layer(default_layer_state)) {
case _QWERTY:
rgb_matrix_layer_helper(HSV_CYAN, mods_enabled, rgb_matrix_config.speed, LED_FLAG_MODIFIER);
break;
}
}
- switch (biton32(default_layer_state)) {
+ switch (get_highest_layer(default_layer_state)) {
case _QWERTY:
rgb_matrix_set_color(is_ez ? 41 : 42, 0x00, 0xFF, 0xFF);
break;
break;
}
if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) {
- if (!layer_state_cmp(layer_state, _ADJUST)) { rgb_matrix_set_color(24, 0x00, 0xFF, 0x00); }
+ if (!layer_state_cmp(layer_state, _ADJUST)) {
+ rgb_matrix_set_color(24, 0x00, 0xFF, 0x00);
+ }
rgb_matrix_set_color(36, 0x00, 0xFF, 0x00);
}
if ((this_mod | this_osm) & MOD_MASK_CTRL) {
#ifdef ENCODER_ENABLE
void encoder_update(bool clockwise) {
- switch (biton32(layer_state)) {
+ switch (get_highest_layer(layer_state)) {
case _RAISE:
clockwise ? tap_code(KC_VOLD) : tap_code(KC_VOLU);
break;
}
break;
case 2:
- keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = active;
+ keymap_config.swap_lctl_lgui = keymap_config.swap_rctl_rgui = active;
break;
case 3:
userspace_config.nuke_switch = active;
layer_state_t layer_state_set_keymap(layer_state_t state) {
planck_ez_left_led_off();
planck_ez_right_led_off();
- switch (biton32(state)) {
+ switch (get_highest_layer(state)) {
case _LOWER:
planck_ez_left_led_on();
break;
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-TAP_DANCE_ENABLE = no
-AUDIO_ENABLE = yes
-SPACE_CADET_ENABLE = no
-
-ifneq ($(strip $(KEYBOARD)), planck/rev6)
- RGBLIGHT_ENABLE = yes
- INDICATOR_LIGHTS = yes
- RGBLIGHT_TWINKLE = yes
- RGBLIGHT_STARTUP_ANIMATION = yes
-endif
-ifeq ($(strip $(KEYBOARD)), planck/light)
- RGB_MATRIX_ENABLE = yes
- RGBLIGHT_ENABLE = no
- RGBLIGHT_STARTUP_ANIMATION = no
- HAPTIC_ENABLE += SOLENOID
-endif
-ifeq ($(strip $(KEYBOARD)), planck/ez)
- RGBLIGHT_ENABLE = no
- # SERIAL_LINK_ENABLE = yes
- ENCODER_ENABLE = yes
- RGB_MATRIX_ENABLE = IS31FL3737
- INDICATOR_LIGHTS = yes
- RGBLIGHT_TWINKLE = yes
- RGBLIGHT_STARTUP_ANIMATION = yes
-endif
-
-ifeq ($(strip $(PROTOCOL)), VUSB)
- NKRO_ENABLE = no
-else
- NKRO_ENABLE = yes
-endif
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+TAP_DANCE_ENABLE = no
+AUDIO_ENABLE = yes
+SPACE_CADET_ENABLE = no
+NKRO_ENABLE = yes
+
+ifneq ($(strip $(KEYBOARD)), planck/rev6)
+ CONSOLE_ENABLE = no
+ COMMAND_ENABLE = no
+ ifeq ($(strip $(LAYOUT_HAS_RGB)), yes)
+ RGBLIGHT_ENABLE = yes
+ endif
+ INDICATOR_LIGHTS = yes
+ RGBLIGHT_TWINKLE = yes
+ RGBLIGHT_STARTUP_ANIMATION = yes
+else
+ CONSOLE_ENABLE = yes
+ COMMAND_ENABLE = yes
+ RGBLIGHT_ENABLE = no
+ RGB_MATRIX_ENABLE = WS2812
+endif
+ifeq ($(strip $(KEYBOARD)), planck/light)
+ RGB_MATRIX_ENABLE = yes
+ RGBLIGHT_ENABLE = no
+ RGBLIGHT_STARTUP_ANIMATION = no
+ # HAPTIC_ENABLE += SOLENOID
+endif
+ifeq ($(strip $(KEYBOARD)), planck/ez)
+ RGBLIGHT_ENABLE = no
+ # SERIAL_LINK_ENABLE = yes
+ ENCODER_ENABLE = yes
+ RGB_MATRIX_ENABLE = IS31FL3737
+ INDICATOR_LIGHTS = yes
+ RGBLIGHT_TWINKLE = yes
+ RGBLIGHT_STARTUP_ANIMATION = yes
+ CONSOLE_ENABLE = yes
+ COMMAND_ENABLE = yes
+endif
-/* Copyright 2015-2017 Jack Humbert
- * Modified by KeyPCB for the Fractal keyboard
- * Backlight isn't on the Fractal, so I've removed the keycode from the keymaps
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
#include "drashna.h"
+/*
+ * The `LAYOUT_ortho_5x12_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them. This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
// clang-format off
#define LAYOUT_ortho_5x12_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A \
) \
LAYOUT_ortho_5x12_wrapper( \
- KC_GRV, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSPC, \
- KC_TAB, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_BSPC, \
- KC_ESC, ALT_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, K2A, RALT_T(KC_QUOT), \
+ KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSPC, \
+ LALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_BSPC, \
+ KC_C1R3, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, RALT_T(KC_QUOT), \
KC_MLSF, CTL_T(K31), K32, K33, K34, K35, K36, K37, K38, K39, RCTL_T(K3A), KC_ENT, \
KC_NO, OS_LCTL, OS_LALT, OS_LGUI, SP_LWER, BK_LWER, DL_RAIS, ET_RAIS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
)
COMMAND_ENABLE = no # Commands for debug and configuration
TAP_DANCE_ENABLE = no
AUDIO_ENABLE = yes
-ifeq ($(strip $(KEYBOARD)), fractal)
- RGB_MATRIX_ENABLE = no
- AUDIO_ENABLE = yes
- RGBLIGHT_ENABLE = yes
- RGBLIGHT_TWINKLE = yes
- BOOTLOADER = qmk-dfu
-endif
-
-ifeq ($(strip $(PROTOCOL)), VUSB)
-NKRO_ENABLE = no
-else
NKRO_ENABLE = yes
+
+ifeq ($(strip $(KEYBOARD)), fractal)
+ RGB_MATRIX_ENABLE = no
+ AUDIO_ENABLE = yes
+ RGBLIGHT_ENABLE = yes
+ RGBLIGHT_TWINKLE = yes
+ BOOTLOADER = qmk-dfu
endif
#define USB_POLLING_INTERVAL_MS 1
#ifdef AUDIO_ENABLE
-# if __GNUC__ > 7
+# if __GNUC__ > 5
# if __has_include("drashna_song_list.h")
# include "drashna_song_list.h"
# endif // if file exists
#endif // !AUDIO_ENABLE
#ifdef RGBLIGHT_ENABLE
-# define RGBLIGHT_SLEEP
# undef RGBLIGHT_ANIMATIONS
-# define RGBLIGHT_EFFECT_BREATHING
-# define RGBLIGHT_EFFECT_SNAKE
-# define RGBLIGHT_EFFECT_KNIGHT
+# if defined(__AVR__) && !defined(__AVR_AT90USB1286__)
+# define RGBLIGHT_SLEEP
+# define RGBLIGHT_EFFECT_BREATHING
+# define RGBLIGHT_EFFECT_SNAKE
+# define RGBLIGHT_EFFECT_KNIGHT
+# else
+# define RGBLIGHT_ANIMATIONS
+# endif
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
# define DRASHNA_UNICODE_MODE 2
#endif
-
-
bool mod_key_press_timer(uint16_t code, uint16_t mod_code, bool pressed) {
static uint16_t this_timer;
if (pressed) {
}
}
+__attribute__((weak)) void keyboard_pre_init_keymap(void) {}
+
+void keyboard_pre_init_user(void) {
+ userspace_config.raw = eeconfig_read_user();
+ keyboard_pre_init_keymap();
+}
// Add reconfigurable functions here, for keymap customization
// This allows for a global, userspace functions, and continued
// customization of the keymap. Use _keymap instead of _user
// functions in the keymaps
-__attribute__((weak))
-void matrix_init_keymap(void) {}
+__attribute__((weak)) void matrix_init_keymap(void) {}
// Call user matrix init, set default RGB colors and then
// call the keymap's init function
void matrix_init_user(void) {
- userspace_config.raw = eeconfig_read_user();
-
-#ifdef BOOTLOADER_CATERINA
+#if defined(BOOTLOADER_CATERINA) && defined(__AVR__)
DDRD &= ~(1 << 5);
PORTD &= ~(1 << 5);
matrix_init_keymap();
}
-__attribute__((weak))
-void keyboard_post_init_keymap(void) {}
+__attribute__((weak)) void keyboard_post_init_keymap(void) {}
void keyboard_post_init_user(void) {
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
keyboard_post_init_keymap();
}
-__attribute__((weak))
-void shutdown_keymap(void) {}
+__attribute__((weak)) void shutdown_keymap(void) {}
- void rgb_matrix_update_pwm_buffers(void);
+void rgb_matrix_update_pwm_buffers(void);
void shutdown_user(void) {
#ifdef RGBLIGHT_ENABLE
rgblight_setrgb_red();
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
- rgb_matrix_set_color_all( 0xFF, 0x00, 0x00 );
+ rgb_matrix_set_color_all(0xFF, 0x00, 0x00);
rgb_matrix_update_pwm_buffers();
#endif // RGB_MATRIX_ENABLE
shutdown_keymap();
}
-__attribute__((weak))
-void suspend_power_down_keymap(void) {}
+__attribute__((weak)) void suspend_power_down_keymap(void) {}
-void suspend_power_down_user(void) {
- suspend_power_down_keymap();
-}
+void suspend_power_down_user(void) { suspend_power_down_keymap(); }
-__attribute__((weak))
-void suspend_wakeup_init_keymap(void) {}
+__attribute__((weak)) void suspend_wakeup_init_keymap(void) {}
-void suspend_wakeup_init_user(void) {
- suspend_wakeup_init_keymap();
-}
+void suspend_wakeup_init_user(void) { suspend_wakeup_init_keymap(); }
-__attribute__((weak))
-void matrix_scan_keymap(void) {}
+__attribute__((weak)) void matrix_scan_keymap(void) {}
// No global matrix scan code, so just run keymap's matrix
// scan function
matrix_scan_keymap();
}
-__attribute__((weak))
-layer_state_t layer_state_set_keymap(layer_state_t state) { return state; }
+__attribute__((weak)) layer_state_t layer_state_set_keymap(layer_state_t state) { return state; }
// on layer change, no matter where the change was initiated
// Then runs keymap's layer change check
return layer_state_set_keymap(state);
}
-__attribute__((weak))
-layer_state_t default_layer_state_set_keymap(layer_state_t state) { return state; }
+__attribute__((weak)) layer_state_t default_layer_state_set_keymap(layer_state_t state) { return state; }
// Runs state check and changes underglow color and animation
layer_state_t default_layer_state_set_user(layer_state_t state) {
state = default_layer_state_set_keymap(state);
#if 0
-#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+# if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
state = default_layer_state_set_rgb(state);
# endif // RGBLIGHT_ENABLE
#endif
return state;
}
-__attribute__((weak))
-void led_set_keymap(uint8_t usb_led) {}
+__attribute__((weak)) void led_set_keymap(uint8_t usb_led) {}
// Any custom LED code goes here.
// So far, I only have keyboard specific code,
// So nothing goes here.
-void led_set_user(uint8_t usb_led) {
- led_set_keymap(usb_led);
-}
+void led_set_user(uint8_t usb_led) { led_set_keymap(usb_led); }
-__attribute__((weak))
-void eeconfig_init_keymap(void) {}
+__attribute__((weak)) void eeconfig_init_keymap(void) {}
void eeconfig_init_user(void) {
userspace_config.raw = 0;
*/
#pragma once
-#include "quantum.h"
+#include QMK_KEYBOARD_H
+
#include "version.h"
#include "eeprom.h"
#include "wrappers.h"
void eeconfig_init_keymap(void);
bool hasAllBitsInMask(uint8_t value, uint8_t mask);
+// clang-format off
typedef union {
uint32_t raw;
struct {
bool rgb_matrix_idle_anim :1;
};
} userspace_config_t;
+// clang-format on
extern userspace_config_t userspace_config;
--- /dev/null
+#pragma once
+
+#ifdef __AVR__
+# include <avr/io.h>
+# include <avr/pgmspace.h>
+#elif defined(ESP8266)
+# include <pgmspace.h>
+#else
+# define PROGMEM
+#endif
+
+// Corne 8x6 font with QMK Firmware Logo
+// Online editor: https://helixfonteditor.netlify.com/
+
+// clang-format off
+const unsigned char font[] PROGMEM = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+ 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+ 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+ 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+ 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+ 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+ 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+ 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+ 0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+ 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+ 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+ 0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+ 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+ 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+ 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+ 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+ 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+ 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+ 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+ 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+ 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+ 0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+ 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+ 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+ 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+ 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+ 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+ 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+ 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+ 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+ 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+ 0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+ 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+ 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+ 0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+ 0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+ 0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+ 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+ 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+ 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+ 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+ 0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+ 0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+ 0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+ 0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+ 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+ 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+ 0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+ 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+ 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+ 0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+ 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+ 0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+ 0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+ 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+ 0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+ 0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+ 0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+ 0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+ 0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+ 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+ 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+ 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+ 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+ 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+ 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+ 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+ 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+ 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+ 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+ 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+ 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+ 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+ 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+ 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+ 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+ 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+ 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+ 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+ 0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+ 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+ 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+ 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+ 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+ 0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+ 0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+ 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+ 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+ 0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+ 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+ 0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+ 0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+ 0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+ 0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+ 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+ 0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+ 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+ 0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+ 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+ 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+ 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+ 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+ 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+ 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+ 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+ 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+ 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+ 0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+ 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+ 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+ 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+ 0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+ 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+ 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+ 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+ 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+ 0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+ 0x4C, 0x90, 0x10, 0x90, 0x7C, 0x00,
+ 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+ 0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+ 0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+ 0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+ 0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+ 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x80, 0xC0, 0xE0, 0xF0, 0xF0, 0x70,
+ 0x38, 0x38, 0x38, 0x78, 0x70, 0xF0,
+ 0xE0, 0xE0, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x80, 0xF0, 0xF8,
+ 0xF8, 0xF8, 0xF8, 0x00, 0x00, 0x00,
+ 0x80, 0xE0, 0xF8, 0xF8, 0xF8, 0xF8,
+ 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x80, 0xF8, 0xF8, 0xF8, 0x38, 0x00,
+ 0x80, 0xE0, 0xF0, 0xF8, 0x78, 0x38,
+ 0x08, 0x08, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x80, 0xF8, 0xF8, 0xF8, 0x38, 0x38,
+ 0x38, 0xF8, 0xF0, 0xF0, 0xE0, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x80, 0xFC, 0xFC,
+ 0xFC, 0x1C, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+ 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+ 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+ 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C,
+ 0xFF, 0xFF, 0xFF, 0xC1, 0x80, 0x00,
+ 0x00, 0x38, 0x38, 0xB8, 0xB8, 0xF9,
+ 0xF9, 0xF8, 0x38, 0x00, 0x00, 0x00,
+ 0x00, 0xC0, 0xF8, 0xFF, 0xFF, 0x1F,
+ 0x01, 0x3F, 0xFF, 0xFF, 0xF0, 0xFE,
+ 0x7F, 0x0F, 0x03, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80,
+ 0xFF, 0xFF, 0xFF, 0x3F, 0x1E, 0x7F,
+ 0xFF, 0xFF, 0xF3, 0xC1, 0x80, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+ 0xFF, 0xFF, 0xFF, 0x3F, 0x1C, 0x1C,
+ 0x9C, 0xFF, 0xFF, 0xF3, 0xE1, 0x00,
+ 0x00, 0x00, 0x00, 0xF0, 0xFC, 0xFE,
+ 0xFF, 0x0F, 0x07, 0x07, 0x8E, 0xFF,
+ 0xFF, 0xFF, 0x3F, 0x00, 0x00, 0x00,
+ 0x00, 0xF0, 0xFC, 0xFE, 0xFF, 0x8F,
+ 0x07, 0x07, 0x8E, 0xFF, 0xFF, 0xFF,
+ 0x3F, 0x00, 0x00, 0x00, 0x00, 0x80,
+ 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00,
+ 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+ 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+ 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+ 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x01, 0x03, 0x03, 0x03, 0x07,
+ 0x07, 0x07, 0x07, 0x03, 0x03, 0x03,
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x06, 0x07, 0x07, 0x07, 0x01, 0x00,
+ 0x00, 0x00, 0x07, 0x07, 0x07, 0x01,
+ 0x00, 0x00, 0x00, 0x07, 0x07, 0x07,
+ 0x07, 0x00, 0x00, 0x00, 0x00, 0x07,
+ 0x07, 0x07, 0x07, 0x00, 0x00, 0x00,
+ 0x00, 0x03, 0x07, 0x07, 0x07, 0x06,
+ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
+ 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ 0x07, 0x07, 0x03, 0x01, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x03, 0x07,
+ 0x07, 0x07, 0x07, 0x03, 0x07, 0x07,
+ 0x07, 0x07, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x03, 0x07, 0x07, 0x07,
+ 0x07, 0x03, 0x07, 0x07, 0x07, 0x07,
+ 0x00, 0x00, 0x00, 0x00, 0x01, 0x07,
+ 0x07, 0x07, 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
--- /dev/null
+#pragma once
+
+#ifdef __AVR__
+# include <avr/io.h>
+# include <avr/pgmspace.h>
+#elif defined(ESP8266)
+# include <pgmspace.h>
+#else
+# define PROGMEM
+#endif
+
+// Corne 8x6 font with QMK Firmware Logo
+// Online editor: https://helixfonteditor.netlify.com/
+
+// clang-format off
+const unsigned char font[] PROGMEM = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+ 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+ 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+ 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+ 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+ 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+ 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+ 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+ 0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+ 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+ 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+ 0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+ 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+ 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+ 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+ 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+ 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+ 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+ 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+ 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+ 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+ 0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+ 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+ 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+ 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+ 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+ 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+ 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+ 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+ 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+ 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+ 0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+ 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+ 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+ 0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+ 0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+ 0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+ 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+ 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+ 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+ 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+ 0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+ 0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+ 0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+ 0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+ 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+ 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+ 0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+ 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+ 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+ 0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+ 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+ 0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+ 0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+ 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+ 0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+ 0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+ 0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+ 0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+ 0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+ 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+ 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+ 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+ 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+ 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+ 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+ 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+ 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+ 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+ 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+ 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+ 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+ 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+ 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+ 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+ 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+ 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+ 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+ 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+ 0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+ 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+ 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+ 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+ 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+ 0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+ 0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+ 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+ 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+ 0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+ 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+ 0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+ 0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+ 0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+ 0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+ 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+ 0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+ 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+ 0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+ 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+ 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+ 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+ 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+ 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+ 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+ 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+ 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+ 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+ 0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+ 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+ 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+ 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+ 0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+ 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+ 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+ 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+ 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+ 0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+ 0x4C, 0x90, 0x10, 0x90, 0x7C, 0x00,
+ 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+ 0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+ 0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+ 0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+ 0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+ 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x80, 0xC0, 0xC0,
+ 0x90, 0x70, 0xE8, 0xA8, 0xE4, 0xC4,
+ 0xC4, 0xA0, 0xE4, 0xB0, 0xDC, 0xE4,
+ 0xFC, 0xFC, 0xFC, 0xFC, 0x3C, 0x3C,
+ 0xFC, 0xF8, 0xF0, 0xF0, 0xE0, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0xF8, 0xF8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xF8, 0xF8, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+ 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+ 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+ 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0,
+ 0xFC, 0xF6, 0xF7, 0xEF, 0xFF, 0x87,
+ 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
+ 0x1F, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0x07, 0x1F, 0x1F, 0x19, 0x15,
+ 0xF7, 0x16, 0x1A, 0x1B, 0x16, 0x07,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x0C, 0x0C, 0x33, 0x33,
+ 0x33, 0x33, 0x33, 0x33, 0xC0, 0xC0,
+ 0x00, 0x00, 0x03, 0x03, 0xFF, 0xFF,
+ 0x03, 0x03, 0x00, 0x00, 0xC0, 0xC0,
+ 0x00, 0x00, 0x00, 0xFC, 0xFC, 0x03,
+ 0x03, 0x03, 0x03, 0x03, 0x03, 0xFC,
+ 0xFC, 0x00, 0x00, 0x00, 0xFC, 0xFC,
+ 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+ 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+ 0xFF, 0xFF, 0x30, 0x30, 0xCC, 0xCC,
+ 0x03, 0x03, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+ 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+ 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+ 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+ 0x03, 0x07, 0x07, 0x07, 0x07, 0x01,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x03, 0x07, 0x07,
+ 0x03, 0x00, 0x00, 0x02, 0x04, 0x00,
+ 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x03, 0x03, 0x03, 0x03,
+ 0x03, 0x03, 0x03, 0x03, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x03, 0x03, 0x03, 0x03, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x03,
+ 0x03, 0x03, 0x03, 0x03, 0x03, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x03, 0x03, 0x00, 0x00, 0x00, 0x00,
+ 0x03, 0x03, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
uint16_t copy_paste_timer;
-__attribute__((weak))
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; }
+__attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; }
-__attribute__((weak))
-bool process_record_secrets(uint16_t keycode, keyrecord_t *record) { return true; }
+__attribute__((weak)) bool process_record_secrets(uint16_t keycode, keyrecord_t *record) { return true; }
// Defines actions tor my global custom keycodes. Defined in drashna.h file
// Then runs the _keymap's record handier if not processed here
switch (keycode) {
case KC_QWERTY ... KC_WORKMAN:
if (record->event.pressed) {
- uint8_t mods = mod_config(get_mods()|get_oneshot_mods());
+ uint8_t mods = mod_config(get_mods() | get_oneshot_mods());
if (!mods) {
set_single_persistent_default_layer(keycode - KC_QWERTY);
} else if (mods & MOD_MASK_SHIFT) {
#if defined(RGB_MATRIX_ENABLE)
static uint32_t hypno_timer;
# if defined(SPLIT_KEYBOARD) || defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_crkbd)
-# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
+# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
# else
-# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN
+# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN
# endif
#endif
* This is especially useful for One Shot Mods, since it's not always obvious if they're still lit up.
*/
#ifdef RGBLIGHT_ENABLE
-#ifdef INDICATOR_LIGHTS
+# ifdef INDICATOR_LIGHTS
void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) {
- if (userspace_config.rgb_layer_change && biton32(layer_state) == 0) {
+ if (userspace_config.rgb_layer_change && get_highest_layer(layer_state) == 0) {
if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) {
-# ifdef SHFT_LED1
+# ifdef SHFT_LED1
rgblight_sethsv_at(120, 255, 255, SHFT_LED1);
-# endif // SHFT_LED1
-# ifdef SHFT_LED2
+# endif // SHFT_LED1
+# ifdef SHFT_LED2
rgblight_sethsv_at(120, 255, 255, SHFT_LED2);
-# endif // SHFT_LED2
+# endif // SHFT_LED2
} else {
-# ifdef SHFT_LED1
+# ifdef SHFT_LED1
rgblight_sethsv_default_helper(SHFT_LED1);
-# endif // SHFT_LED1
-# ifdef SHFT_LED2
+# endif // SHFT_LED1
+# ifdef SHFT_LED2
rgblight_sethsv_default_helper(SHFT_LED2);
-# endif // SHFT_LED2
+# endif // SHFT_LED2
}
if ((this_mod | this_osm) & MOD_MASK_CTRL) {
-# ifdef CTRL_LED1
+# ifdef CTRL_LED1
rgblight_sethsv_at(0, 255, 255, CTRL_LED1);
-# endif // CTRL_LED1
-# ifdef CTRL_LED2
+# endif // CTRL_LED1
+# ifdef CTRL_LED2
rgblight_sethsv_at(0, 255, 255, CTRL_LED2);
-# endif // CTRL_LED2
+# endif // CTRL_LED2
} else {
-# ifdef CTRL_LED1
+# ifdef CTRL_LED1
rgblight_sethsv_default_helper(CTRL_LED1);
-# endif // CTRL_LED1
-# ifdef CTRL_LED2
+# endif // CTRL_LED1
+# ifdef CTRL_LED2
rgblight_sethsv_default_helper(CTRL_LED2);
-# endif // CTRL_LED2
+# endif // CTRL_LED2
}
if ((this_mod | this_osm) & MOD_MASK_GUI) {
-# ifdef GUI_LED1
+# ifdef GUI_LED1
rgblight_sethsv_at(51, 255, 255, GUI_LED1);
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
rgblight_sethsv_at(51, 255, 255, GUI_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
} else {
-# ifdef GUI_LED1
+# ifdef GUI_LED1
rgblight_sethsv_default_helper(GUI_LED1);
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
rgblight_sethsv_default_helper(GUI_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
}
if ((this_mod | this_osm) & MOD_MASK_ALT) {
-# ifdef ALT_LED1
+# ifdef ALT_LED1
rgblight_sethsv_at(240, 255, 255, ALT_LED1);
-# endif // ALT_LED1
-# ifdef GUI_LED2
+# endif // ALT_LED1
+# ifdef GUI_LED2
rgblight_sethsv_at(240, 255, 255, ALT_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
} else {
-# ifdef GUI_LED1
+# ifdef GUI_LED1
rgblight_sethsv_default_helper(ALT_LED1);
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
rgblight_sethsv_default_helper(ALT_LED2);
-# endif // GUI_LED2
+# endif // GUI_LED2
}
}
}
set_rgb_indicators(get_mods(), host_keyboard_leds(), get_oneshot_mods());
}
}
-#endif // INDICATOR_LIGHTS
+# endif // INDICATOR_LIGHTS
-#ifdef RGBLIGHT_TWINKLE
+# ifdef RGBLIGHT_TWINKLE
static rgblight_fadeout lights[RGBLED_NUM];
__attribute__((weak)) bool rgblight_twinkle_is_led_used_keymap(uint8_t index) { return false; }
/* This function checks for used LEDs. This way, collisions don't occur and cause weird rendering */
bool rgblight_twinkle_is_led_used(uint8_t index) {
switch (index) {
-# ifdef INDICATOR_LIGHTS
-# ifdef SHFT_LED1
+# ifdef INDICATOR_LIGHTS
+# ifdef SHFT_LED1
case SHFT_LED1:
return true;
-# endif // SHFT_LED1
-# ifdef SHFT_LED2
+# endif // SHFT_LED1
+# ifdef SHFT_LED2
case SHFT_LED2:
return true;
-# endif // SHFT_LED2
-# ifdef CTRL_LED1
+# endif // SHFT_LED2
+# ifdef CTRL_LED1
case CTRL_LED1:
return true;
-# endif // CTRL_LED1
-# ifdef CTRL_LED2
+# endif // CTRL_LED1
+# ifdef CTRL_LED2
case CTRL_LED2:
return true;
-# endif // CTRL_LED2
-# ifdef GUI_LED1
+# endif // CTRL_LED2
+# ifdef GUI_LED1
case GUI_LED1:
return true;
-# endif // GUI_LED1
-# ifdef GUI_LED2
+# endif // GUI_LED1
+# ifdef GUI_LED2
case GUI_LED2:
return true;
-# endif // GUI_LED2
-# ifdef ALT_LED1
+# endif // GUI_LED2
+# ifdef ALT_LED1
case ALT_LED1:
return true;
-# endif // ALT_LED1
-# ifdef ALT_LED2
+# endif // ALT_LED1
+# ifdef ALT_LED2
case ALT_LED2:
return true;
-# endif // ALT_LED2
-# endif // INDICATOR_LIGHTS
+# endif // ALT_LED2
+# endif // INDICATOR_LIGHTS
default:
return rgblight_twinkle_is_led_used_keymap(index);
}
if (light->life) {
light->life -= 1;
- if (biton32(layer_state) == 0) {
+ if (get_highest_layer(layer_state) == 0) {
sethsv(light->hue + rand() % 0xF, 255, light->life, (LED_TYPE *)&led[light_index]);
}
light->timer = timer_read();
} else {
- if (light->enabled && biton32(layer_state) == 0) {
+ if (light->enabled && get_highest_layer(layer_state) == 0) {
rgblight_sethsv_default_helper(light_index);
}
litup = light->enabled = false;
}
}
}
- if (litup && biton32(layer_state) == 0) {
+ if (litup && get_highest_layer(layer_state) == 0) {
rgblight_set();
}
}
rgblight_sethsv_at(light->hue, 255, light->life, light_index);
}
-#endif
-#endif // RGBLIGHT_ENABLE
+# endif
+#endif // RGBLIGHT_ENABLE
bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
uint16_t temp_keycode = keycode;
userspace_config.rgb_matrix_idle_anim ^= 1;
dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
eeconfig_update_user(userspace_config.raw);
- if (userspace_config.rgb_matrix_idle_anim) { rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP); }
+ if (userspace_config.rgb_matrix_idle_anim) {
+ rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
+ }
}
#endif
break;
is_eeprom_updated = true;
}
#endif
- if (is_eeprom_updated) { eeconfig_update_user(userspace_config.raw); }
+ if (is_eeprom_updated) {
+ eeconfig_update_user(userspace_config.raw);
+ }
}
break;
}
void keyboard_post_init_rgb(void) {
#if defined(RGBLIGHT_ENABLE)
-# if defined(RGBLIGHT_STARTUP_ANIMATION)
+# if defined(RGBLIGHT_STARTUP_ANIMATION)
bool is_enabled = rgblight_config.enable;
if (userspace_config.rgb_layer_change) {
rgblight_enable_noeeprom();
rgblight_disable_noeeprom();
}
-# endif
+# endif
layer_state_set_user(layer_state);
#endif
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
- if (userspace_config.rgb_matrix_idle_anim) {
- rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
- }
+ if (userspace_config.rgb_matrix_idle_anim) {
+ rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
+ }
#endif
}
#endif
}
+#ifdef RGBLIGHT_ENABLE
+void rgblight_set_hsv_and_mode(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode) {
+ rgblight_sethsv_noeeprom(hue, sat, val);
+ wait_us(175); // Add a slight delay between color and mode to ensure it's processed correctly
+ rgblight_mode_noeeprom(mode);
+}
+#endif
+
layer_state_t layer_state_set_rgb(layer_state_t state) {
#ifdef RGBLIGHT_ENABLE
if (userspace_config.rgb_layer_change) {
- switch (biton32(state)) {
+ switch (get_highest_layer(state)) {
case _MACROS:
- rgblight_sethsv_noeeprom_orange();
- userspace_config.is_overwatch ? rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 2) : rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 3);
+ rgblight_set_hsv_and_mode(HSV_ORANGE, userspace_config.is_overwatch ? RGBLIGHT_MODE_SNAKE + 2 : RGBLIGHT_MODE_SNAKE + 3);
break;
case _MEDIA:
- rgblight_sethsv_noeeprom_chartreuse();
- rgblight_mode_noeeprom(RGBLIGHT_MODE_KNIGHT + 1);
+ rgblight_set_hsv_and_mode(HSV_CHARTREUSE, RGBLIGHT_MODE_KNIGHT + 1);
break;
case _GAMEPAD:
- rgblight_sethsv_noeeprom_orange();
- rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 2);
+ rgblight_set_hsv_and_mode(HSV_ORANGE, RGBLIGHT_MODE_SNAKE + 2);
break;
case _DIABLO:
- rgblight_sethsv_noeeprom_red();
- rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3);
+ rgblight_set_hsv_and_mode(HSV_RED, RGBLIGHT_MODE_BREATHING + 3);
break;
case _RAISE:
- rgblight_sethsv_noeeprom_yellow();
- rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3);
+ rgblight_set_hsv_and_mode(HSV_YELLOW, RGBLIGHT_MODE_BREATHING + 3);
break;
case _LOWER:
- rgblight_sethsv_noeeprom_green();
- rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3);
+ rgblight_set_hsv_and_mode(HSV_GREEN, RGBLIGHT_MODE_BREATHING + 3);
break;
case _ADJUST:
- rgblight_sethsv_noeeprom_red();
- rgblight_mode_noeeprom(RGBLIGHT_MODE_KNIGHT + 2);
+ rgblight_set_hsv_and_mode(HSV_RED, RGBLIGHT_MODE_KNIGHT + 2);
break;
default: // for any other layers, or the default layer
- switch (biton32(default_layer_state)) {
+ {
+ uint8_t mode = get_highest_layer(state) == _MODS ? RGBLIGHT_MODE_BREATHING : RGBLIGHT_MODE_STATIC_LIGHT;
+ switch (get_highest_layer(default_layer_state)) {
case _COLEMAK:
- rgblight_sethsv_noeeprom_magenta();
+ rgblight_set_hsv_and_mode(HSV_MAGENTA, mode);
break;
case _DVORAK:
- rgblight_sethsv_noeeprom_springgreen();
+ rgblight_set_hsv_and_mode(HSV_SPRINGGREEN, mode);
break;
case _WORKMAN:
- rgblight_sethsv_noeeprom_goldenrod();
+ rgblight_set_hsv_and_mode(HSV_GOLDENROD, mode);
break;
case _NORMAN:
- rgblight_sethsv_noeeprom_coral();
+ rgblight_set_hsv_and_mode(HSV_CORAL, mode);
break;
case _MALTRON:
- rgblight_sethsv_noeeprom_yellow();
+ rgblight_set_hsv_and_mode(HSV_YELLOW, mode);
break;
case _EUCALYN:
- rgblight_sethsv_noeeprom_pink();
+ rgblight_set_hsv_and_mode(HSV_PINK, mode);
break;
case _CARPLAX:
- rgblight_sethsv_noeeprom_blue();
+ rgblight_set_hsv_and_mode(HSV_BLUE, mode);
break;
default:
- rgblight_sethsv_noeeprom_cyan();
+ rgblight_set_hsv_and_mode(HSV_CYAN, mode);
break;
}
- biton32(state) == _MODS ? rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING) : rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
break;
+ }
}
}
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
# include "lib/lib8tion/lib8tion.h"
extern led_config_t g_led_config;
+
void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type) {
HSV hsv = {hue, sat, val};
if (hsv.v > rgb_matrix_config.hsv.v) {
layer_state_t default_layer_state_set_rgb(layer_state_t state);
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_TWINKLE)
-void scan_rgblight_fadeout(void);
+void scan_rgblight_fadeout(void);
#endif
#if defined(RGBLIGHT_ENABLE)
-void rgblight_sethsv_default_helper(uint8_t index);
+void rgblight_sethsv_default_helper(uint8_t index);
#endif
#ifdef RGB_MATRIX_ENABLE
-void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type);
#endif
#ifndef RGBLIGHT_EFFECT_BREATHE_TABLE
#define RGBLIGHT_EFFECT_BREATHE_TABLE
+// clang-format off
const uint8_t rgblight_effect_breathe_table[] PROGMEM = {
- /* #define RGBLIGHT_EFFECT_BREATHE_CENTER 0.00 */
- /* #define RGBLIGHT_EFFECT_BREATHE_MAX 255 */
+/* #define RGBLIGHT_EFFECT_BREATHE_CENTER 0.00 */
+/* #define RGBLIGHT_EFFECT_BREATHE_MAX 255 */
#if RGBLIGHT_BREATHE_TABLE_SIZE == 256
0x44, 0x45, 0x47, 0x48, 0x4a, 0x4b, 0x4c, 0x4e,
0x4e, 0x48
#endif /* 64 bytes table */
};
+// clang-format on
-static const int table_scale = 256/sizeof(rgblight_effect_breathe_table);
+static const int table_scale = 256 / sizeof(rgblight_effect_breathe_table);
#endif /* RGBLIGHT_EFFECT_BREATHE_TABLE */
SRC += drashna.c \
process_records.c
-LINK_TIME_OPTIMIZATION_ENABLE = yes
-SPACE_CADET_ENABLE = no
+LTO_ENABLE = yes
+SPACE_CADET_ENABLE = no
ifneq ($(strip $(NO_SECRETS)), yes)
- ifneq ("$(wildcard $(USER_PATH)/secrets.c)","")
- SRC += secrets.c
- endif
- ifeq ($(strip $(NO_SECRETS)), lite)
- OPT_DEFS += -DNO_SECRETS
- endif
+ ifneq ("$(wildcard $(USER_PATH)/secrets.c)","")
+ SRC += secrets.c
+ endif
+ ifeq ($(strip $(NO_SECRETS)), lite)
+ OPT_DEFS += -DNO_SECRETS
+ endif
endif
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
ifeq ($(strip $(MAKE_BOOTLOADER)), yes)
OPT_DEFS += -DMAKE_BOOTLOADER
endif
+
+# At least until build.mk or the like drops, this is here to prevent
+# VUSB boards from enabling NKRO, as they do not support it. Ideally
+# this should be handled per keyboard, but until that happens ...
+ifeq ($(strip $(PROTOCOL)), VUSB)
+ NKRO_ENABLE = no
+endif
\ No newline at end of file
-#include "template.h"
-
-
-// Add reconfigurable functions here, for keymap customization
-// This allows for a global, userspace functions, and continued
-// customization of the keymap. Use _keymap instead of _user
-// functions in the keymaps
-__attribute__ ((weak))
-void matrix_init_keymap(void) {}
-
-// Call user matrix init, then call the keymap's init function
-void matrix_init_user(void) {
- matrix_init_keymap();
-}
-
-
-__attribute__ ((weak))
-void matrix_scan_keymap(void) {}
-
-// No global matrix scan code, so just run keymap's matix
-// scan function
-void matrix_scan_user(void) {
- matrix_scan_keymap();
-}
-
-
-__attribute__ ((weak))
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-// Defines actions tor my global custom keycodes. Defined in drashna.h file
-// Then runs the _keymap's recod handier if not processed here,
-// And use "NEWPLACEHOLDER" for new safe range
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
- switch (keycode) {
- case KC_MAKE:
- if (!record->event.pressed) {
- SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
-#if (defined(BOOTLOADER_DFU) || defined(BOOTLOADER_LUFA_DFU) || defined(BOOTLOADER_QMK_DFU))
- ":dfu"
-#elif defined(BOOTLOADER_HALFKAY)
- ":teensy"
-#elif defined(BOOTLOADER_CATERINA)
- ":avrdude"
-#endif
- SS_TAP(X_ENTER));
- }
- return false;
- break;
-
- case VRSN:
- if (record->event.pressed) {
- SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
- }
- return false;
- break;
- }
- return process_record_keymap(keycode, record);
-}
-
-
-__attribute__ ((weak))
-layer_state_t layer_state_set_keymap (layer_state_t state) {
- return state;
-}
-
-layer_state_t layer_state_set_user (layer_state_t state) {
- return layer_state_set_keymap (state);
-}
-
-
-
-__attribute__ ((weak))
-void led_set_keymap(uint8_t usb_led) {}
-
-void led_set_user(uint8_t usb_led) {
- led_set_keymap(usb_led);
-}
-
-
-
-__attribute__ ((weak))
-void suspend_power_down_keymap(void) {}
-
-void suspend_power_down_user(void)
-{
- suspend_power_down_keymap();
-}
-
-
-
-__attribute__ ((weak))
-void suspend_wakeup_init_keymap(void) {}
-
-void suspend_wakeup_init_user(void)
-{
- suspend_wakeup_init_keymap();
- #ifdef KEYBOARD_ergodox_ez
- wait_ms(10);
- #endif
-}
-
-
-
-__attribute__ ((weak))
-void startup_keymap(void) {}
-
-void startup_user (void) {
- #ifdef RGBLIGHT_ENABLE
- matrix_init_rgb();
- #endif //RGBLIGHT_ENABLE
- startup_keymap();
-}
-
-
-
-__attribute__ ((weak))
-void shutdown_keymap(void) {}
-
-void shutdown_user (void) {
- shutdown_keymap();
-}
+#include "template.h"
+
+// Add reconfigurable functions here, for keymap customization
+// This allows for a global, userspace functions, and continued
+// customization of the keymap. Use _keymap instead of _user
+// functions in the keymaps
+__attribute__((weak)) void matrix_init_keymap(void) {}
+
+// Call user matrix init, then call the keymap's init function
+void matrix_init_user(void) { matrix_init_keymap(); }
+
+__attribute__((weak)) void matrix_scan_keymap(void) {}
+
+// No global matrix scan code, so just run keymap's matix
+// scan function
+void matrix_scan_user(void) { matrix_scan_keymap(); }
+
+__attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; }
+
+// Defines actions tor my global custom keycodes. Defined in drashna.h file
+// Then runs the _keymap's recod handier if not processed here,
+// And use "NEWPLACEHOLDER" for new safe range
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case KC_MAKE:
+ if (!record->event.pressed) {
+ SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
+#if (defined(BOOTLOADER_DFU) || defined(BOOTLOADER_LUFA_DFU) || defined(BOOTLOADER_QMK_DFU))
+ ":dfu"
+#elif defined(BOOTLOADER_HALFKAY)
+ ":teensy"
+#elif defined(BOOTLOADER_CATERINA)
+ ":avrdude"
+#endif
+ SS_TAP(X_ENTER));
+ }
+ return false;
+ break;
+
+ case VRSN:
+ if (record->event.pressed) {
+ SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+ }
+ return false;
+ break;
+ }
+ return process_record_keymap(keycode, record);
+}
+
+__attribute__((weak)) layer_state_t layer_state_set_keymap(layer_state_t state) { return state; }
+
+layer_state_t layer_state_set_user(layer_state_t state) { return layer_state_set_keymap(state); }
+
+__attribute__((weak)) void led_set_keymap(uint8_t usb_led) {}
+
+void led_set_user(uint8_t usb_led) { led_set_keymap(usb_led); }
+
+__attribute__((weak)) void suspend_power_down_keymap(void) {}
+
+void suspend_power_down_user(void) { suspend_power_down_keymap(); }
+
+__attribute__((weak)) void suspend_wakeup_init_keymap(void) {}
+
+void suspend_wakeup_init_user(void) {
+ suspend_wakeup_init_keymap();
+#ifdef KEYBOARD_ergodox_ez
+ wait_ms(10);
+#endif
+}
+
+__attribute__((weak)) void startup_keymap(void) {}
+
+void startup_user(void) {
+#ifdef RGBLIGHT_ENABLE
+ matrix_init_rgb();
+#endif // RGBLIGHT_ENABLE
+ startup_keymap();
+}
+
+__attribute__((weak)) void shutdown_keymap(void) {}
+
+void shutdown_user(void) { shutdown_keymap(); }
-#ifndef USERSPACE
-#define USERSPACE
+#pragma once
-#include "quantum.h"
+#include QMK_KEYBOARD_H
#include "version.h"
#include "eeprom.h"
#define BASE 0
enum custom_keycodes {
- VRSN = SAFE_RANGE, // can always be here
- KC_MAKE,
- KC_RESET,
- NEWPLACEHOLDER //use "NEWPLACEHOLDER for keymap specific codes
+ VRSN = SAFE_RANGE, // can always be here
+ KC_MAKE,
+ KC_RESET,
+ NEWPLACEHOLDER // use "NEWPLACEHOLDER for keymap specific codes
};
-
-#endif
HCoop / jackhill / qmk / firmware.git / commitdiff