--- /dev/null
+/*
+Copyright 2017 Baris Tosun
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER RominRonin CandyKeys
+#define PRODUCT Katana60
+#define DESCRIPTION QMK keyboard firmware for Katana60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F5, F6, F4, F1, D0 }
+#define MATRIX_COL_PINS { B7, B3, B2, B1, B0, C7, D1, D2, C6, B6, B5, B4, D4, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define TAPPING_TERM 200
+#define PREVENT_STUCK_MODIFIERS
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KATANA60_H
+#define KATANA60_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k00, k01, k02, k03, k04, k05, k06, k09, k0a, k0b, k0c, k0d \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, KC_NO, KC_NO, k09, k0a, k0b, k0c, k0d, KC_NO }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \
+ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e }, \
+}
+
+#endif
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Windows based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LCTL(KC_LEFT) // Previous word
+#define K_NXTWD LCTL(KC_RIGHT) // Next word
+#define K_LSTRT KC_HOME // Start of line
+#define K_LEND KC_END // End of line
+#define UNDO LCTL(KC_Z) // UNDO
+#define CUT LCTL(KC_X) // CUT
+#define COPY LCTL(KC_C) // COPY
+#define PASTE LCTL(KC_V) // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PLUS,
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC,
+ MO(3), KC_A, KC_R, KC_S, KC_T, KC_D, KC_HOME, KC_PGUP, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, KC_DEL, KC_PGDN, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ MO(2), KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_ENT, K_SPCFN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,MO(2)
+ ),
+[NUMB] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, DF(0), KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+ _______, _______, _______, KC_MS_U, _______, _______, _______, KC_7, KC_8, KC_9, KC_PPLS, _______, _______, _______,
+ _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_4, KC_5, KC_6, KC_PPLS, _______, _______, _______,
+ _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1, KC_2, KC_3, KC_PENT, _______, _______, _______,
+ _______, _______, _______, _______, KC_BTN1, _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______
+ ),
+[SYMB] = KEYMAP(
+ RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_VOLD, KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+ _______, KC_PLUS, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+ _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______, _______, _______
+ ),
+[CURS] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, KC_WH_U, _______, _______, _______, _______, _______, _______, K_PRVWD, KC_UP, K_NXTWD, _______, _______,
+ _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______, _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, _______,
+ _______, UNDO, CUT, COPY, PASTE, _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+ [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The colemak keymap for katana60
+
+Same as the default layout, but with default Colemal layout.
+
+# TODO: references to extend layer and symbol layers
\ No newline at end of file
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Windows based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LCTL(KC_LEFT) // Previous word
+#define K_NXTWD LCTL(KC_RIGHT) // Next word
+#define K_LSTRT KC_HOME // Start of line
+#define K_LEND KC_END // End of line
+#define UNDO LCTL(KC_Z) // UNDO
+#define CUT LCTL(KC_X) // CUT
+#define COPY LCTL(KC_C) // COPY
+#define PASTE LCTL(KC_V) // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PLUS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, KC_DEL, KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ MO(2), KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_ENT, K_SPCFN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,MO(2)
+ ),
+[NUMB] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, DF(0), KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+ _______, _______, _______, KC_MS_U, _______, _______, _______, KC_7, KC_8, KC_9, KC_PPLS, _______, _______, _______,
+ _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_4, KC_5, KC_6, KC_PPLS, _______, _______, _______,
+ _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1, KC_2, KC_3, KC_PENT, _______, _______, _______,
+ _______, _______, _______, _______, KC_BTN1, _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______
+ ),
+[SYMB] = KEYMAP(
+ RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_VOLD, KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+ _______, KC_PLUS, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+ _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______, _______, _______
+ ),
+[CURS] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, KC_WH_U, _______, _______, _______, _______, _______, _______, K_PRVWD, KC_UP, K_NXTWD, _______, _______,
+ _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______, _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, _______,
+ _______, UNDO, CUT, COPY, PASTE, _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+ [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The default keymap for katana60
+
+This layout takes my own personal layout (in development at the Colemak forum) and remaps the keys and shortcuts for Windows (I'm a MacOS user).
+The testing was comducted on my Windows gaming PC, though it was not exhaustive, all the many layers and useful navigation shortcuts worked fine.
+
+# TODO: references to extend layer and symbol layers
+# TODO: more information
\ No newline at end of file
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// MacOS based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LALT(KC_LEFT) // Previous word
+#define K_NXTWD LALT(KC_RIGHT) // Next word
+#define K_LSTRT LGUI(KC_LEFT) // Start of line
+#define K_LEND LGUI(KC_RIGHT) // End of line
+#define UNDO LGUI(KC_Z) // UNDO
+#define CUT LGUI(KC_X) // CUT
+#define COPY LGUI(KC_C) // COPY
+#define PASTE LGUI(KC_V) // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PLUS,
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC,
+ MO(3), KC_A, KC_R, KC_S, KC_T, KC_G, KC_HOME, KC_PGUP, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_END, KC_DEL, KC_PGDN, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ MO(2), KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, KC_ENT, K_SPCFN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,MO(2)
+ ),
+[NUMB] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, DF(0), KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+ _______, _______, _______, KC_MS_U, _______, _______, _______, KC_7, KC_8, KC_9, KC_PPLS, _______, _______, _______,
+ _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_4, KC_5, KC_6, KC_PPLS, _______, _______, _______,
+ _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1, KC_2, KC_3, KC_PENT, _______, _______, _______,
+ _______, _______, _______, _______, KC_BTN1, _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______
+ ),
+[SYMB] = KEYMAP(
+ RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_VOLD, KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+ _______, KC_PLUS, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+ _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______, _______, _______
+ ),
+[CURS] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, KC_WH_U, _______, _______, _______, _______, _______, _______, K_PRVWD, KC_UP, K_NXTWD, _______, _______,
+ _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______, _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, _______,
+ _______, UNDO, CUT, COPY, PASTE, _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+ [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# RominRonin's keymap for katana60
+
+My own personal daily layout. OS keys are oriented for MacOS and the keys are in COLEMAK Mod-DH layout.
+
+# TODO: references to extend layer and symbol layers
\ No newline at end of file
--- /dev/null
+# Katana60
+
+
+
+A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com.
+
+Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin)
+Hardware Supported: Katana60 PCB v1, Teensy 2.0
+Hardware Availability: [CandyKeys.com](https://CandyKeys.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make katana60:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/)
\ No newline at end of file
--- /dev/null
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
HCoop / jackhill / qmk / firmware.git / commitdiff