--- /dev/null
+/*
+Copyright 2019 Erovia
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0030
+#define DEVICE_VER 0x0001
+#define MANUFACTURER LazyDesigners
+#define PRODUCT THE30
+#define DESCRIPTION A 30% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2 }
+#define MATRIX_COL_PINS { B1, B2, B3, D4, D6, D7, B4, B5, B6, C6 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_LEVELS 3
--- /dev/null
+{
+ "keyboard_name": "THE30",
+ "url": "http://lazydesigners.cn",
+ "maintainer": "Erovia",
+ "width": 10,
+ "height": 3,
+ "layouts": {
+ "LAYOUT_ortho_3x10": {
+ "key_count": 30,
+ "layout": [
+ {"label":"Q", "x":0, "y":0},
+ {"label":"W", "x":1, "y":0},
+ {"label":"E", "x":2, "y":0},
+ {"label":"R", "x":3, "y":0},
+ {"label":"T", "x":4, "y":0},
+ {"label":"Y", "x":5, "y":0},
+ {"label":"U", "x":6, "y":0},
+ {"label":"I", "x":7, "y":0},
+ {"label":"O", "x":8, "y":0},
+ {"label":"P", "x":9, "y":0},
+ {"label":"A", "x":0, "y":1},
+ {"label":"S", "x":1, "y":1},
+ {"label":"D", "x":2, "y":1},
+ {"label":"F", "x":3, "y":1},
+ {"label":"G", "x":4, "y":1},
+ {"label":"H", "x":5, "y":1},
+ {"label":"J", "x":6, "y":1},
+ {"label":"K", "x":7, "y":1},
+ {"label":"L", "x":8, "y":1},
+ {"label":"ENTER", "x":9, "y":1},
+ {"label":"Z", "x":0, "y":2},
+ {"label":"X", "x":1, "y":2},
+ {"label":"C", "x":2, "y":2},
+ {"label":"V", "x":3, "y":2},
+ {"label":"B", "x":4, "y":2},
+ {"label":"N", "x":5, "y":2},
+ {"label":"M", "x":6, "y":2},
+ {"label":",", "x":7, "y":2},
+ {"label":".", "x":8, "y":2},
+ {"label":"/", "x":9, "y":2}
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Erovia
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+ _QWERTY,
+ _FN
+};
+
+/* Press for Enter, hold for FN layer */
+#define FN_ENT LT(_FN, KC_ENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/*
+ * ,-------------------------------------------------.
+ * | Q | W | E | R | T | Y | U | I | O | P |
+ * |-------------------------------------------------|
+ * | A | S | D | F | G | H | J | K | L |ENT |
+ * |-------------------------------------------------|
+ * | Z | X | C | V | B | N | M | , | . | / |
+ * `-------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT_ortho_3x10(
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, FN_ENT,
+ KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH
+ ),
+/*
+ * ,-------------------------------------------------.
+ * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
+ * |-------------------------------------------------|
+ * | | | | | | | | | | |
+ * |-------------------------------------------------|
+ * |RST |ERST| | |SPC | | | | | |
+ * `-------------------------------------------------'
+ */
+ [_FN] = LAYOUT_ortho_3x10(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ RESET, EEP_RST, _______, _______, KC_SPC, _______, _______, _______, _______, _______
+ ),
+
+};
--- /dev/null
+# The default keymap for THE30
+
+_Very simple keymap for testing and for easy access to RESET_
+
+## QWERTY (Normal) Layer
+```
+,-------------------------------------------------.
+| Q | W | E | R | T | Y | U | I | O | P |
+|-------------------------------------------------|
+| A | S | D | F | G | H | J | K | L |ENT |
+|-------------------------------------------------|
+| Z | X | C | V | B | N | M | , | . | / |
+`-------------------------------------------------'
+```
+
+## FN Layer
+```
+,-------------------------------------------------.
+| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
+|-------------------------------------------------|
+| | | | | | | | | | |
+|-------------------------------------------------|
+|RST |ERST| | |SPC | | | | | |
+`-------------------------------------------------'
+```
--- /dev/null
+# THE30
+
+
+
+A 30% custom keyboard designed and produced by [LazyDesigners](http://lazydesigners.cn).
+
+* Keyboard Maintainer: [Erovia](https://github.com/Erovia)
+* Hardware Supported: THE30
+* Hardware Availability: Check for GBs on [Geekhack](https://geekhack.org) and on [LazyDesigner's homepage.](http://lazydesigners.cn)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make lazydesigners/the30:default
+
+Flashing example for this keyboard ([using the command line](https://docs.qmk.fm/#/newbs_flashing?id=flash-your-keyboard-from-the-command-line)):
+
+ make lazydesigners/the30:default:flash
+
+To enter the bootloader, either press the RESET button on the PCB or the RESET button if the current keymap has one.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs
+
+# Support community keymaps
+LAYOUTS = ortho_3x10
--- /dev/null
+/* Copyright 2019 Erovia
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "the30.h"
--- /dev/null
+/* Copyright 2019 Erovia
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/*
+ * ,-------------------------------------------------.
+ * | | | | | | | | | | |
+ * |-------------------------------------------------|
+ * | | | | | | | | | | |
+ * |-------------------------------------------------|
+ * | | | | | | | | | | |
+ * `-------------------------------------------------'
+ */
+
+#define LAYOUT_ortho_3x10( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+}
HCoop / jackhill / qmk / firmware.git / commitdiff