/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x2010
-#define DEVICE_VER 0x0001
#define MANUFACTURER 1up Keyboards
#define PRODUCT Sweet16
#define DESCRIPTION 4x4 grid
#define MATRIX_ROWS 4
#define MATRIX_COLS 4
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* number of backlight levels */
-
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
+#define BACKLIGHT_LEVELS 10
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-
-#define RGB_DI_PIN B1
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 1
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
{
"keyboard_name": "Sweet 16",
"url": "",
- "maintainer": "qmk",
+ "maintainer": "skullydazed",
"width": 4,
"height": 4,
"layouts": {
return true;
}
-void led_set_user(uint8_t usb_led) {
-
- #ifndef CONVERT_TO_PROTON_C
- /* Map RXLED to USB_LED_NUM_LOCK */
- if (usb_led & (1 << USB_LED_NUM_LOCK)) {
- DDRB |= (1 << 0); PORTB &= ~(1 << 0);
- } else {
- DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
- }
-
- /* Map TXLED to USB_LED_CAPS_LOCK */
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- DDRD |= (1 << 5); PORTD &= ~(1 << 5);
- } else {
- DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
- }
- #endif
+#ifdef ENCODER_ENABLE
+#include "encoder.h"
+void encoder_update_user(int8_t index, bool clockwise) {
+ if (index == 0) { /* First encoder */
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ }
}
+#endif
-# Sweet 16 Macropad
-
-A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Bishop Keyboards
-
-Keyboard Maintainer: QMK Community
-Hardware Supported: Sweet16 Keyboard PCB
-Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make 1upkeyboards/sweet16:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+# Sweet 16 Macropad
+
+A 4x4 numpad/macro pad sold by 1up Keyboards.
+
+* Keyboard Maintainer: skullydazed
+* Hardware Supported: Sweet16 Keyboard PCB
+* Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
+
+Revisions:
+* [v1](./v1/)- The original macropad, designed by Bishop Keyboards
+* [v2/promicro](./v2/promicro)- The second macropad built with a Pro Micro, designed by Clueboard
+* [v2/proton_c](./v2/proton_c)- The second macropad built with a Proton C, designed by Clueboard
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-# Teensy halfkay
-# Pro Micro caterina
-# Atmel DFU atmel-dfu
-# LUFA DFU lufa-dfu
-# QMK DFU qmk-dfu
-# ATmega32A bootloadHID
-# ATmega328P USBasp
-BOOTLOADER = caterina
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = yes
-EXTRAFLAGS += -flto
+# Build Options
+#
+DEFAULT_FOLDER = 1upkeyboards/sweet16/v1
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
--- /dev/null
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT_ID 0x2010
+#define DEVICE_VER 0x0001
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Underglow options */
+#define RGB_DI_PIN B1
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 1
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
-# Sweet 16 Macropad
+# Sweet16 V1
A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Bishop Keyboards
-Keyboard Maintainer: QMK Community
-Hardware Supported: Sweet16 Keyboard PCB
-Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: Sweet16 V1 PCB
+* Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
Make example for this keyboard (after setting up your build environment):
- make 1upkeyboards/sweet16:default
+ make 1upkeyboards/sweet16/v1:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+MCU = atmega32u4
+BOOTLOADER = caterina
+LINK_TIME_OPTIMIZATION_ENABLE=yes
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
--- /dev/null
+#include "v1.h"
+
+void led_set_kb(uint8_t usb_led) {
+#ifndef CONVERT_TO_PROTON_C
+ /* Map RXLED to USB_LED_NUM_LOCK */
+ if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+ setPinOutput(B0);
+ writePinLow(B0);
+ } else {
+ setPinInput(B0);
+ }
+
+ /* Map TXLED to USB_LED_CAPS_LOCK */
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ setPinOutput(D5);
+ writePinLow(D5);
+ } else {
+ setPinInput(D5);
+ }
+#endif
+}
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+
+// Any changes to the layout names and/or definitions must also be made to info.json
+
+#define LAYOUT_ortho_4x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, K13 }, \
+ { K20, K21, K22, K23 }, \
+ { K30, K31, K32, K33 } \
+}
+
+#define LAYOUT_numpad_4x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, \
+ K20, K21, K22, K23, \
+ K31, K32 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, KC_NO }, \
+ { K20, K21, K22, K23 }, \
+ { KC_NO, K31, K32, KC_NO } \
+}
+
--- /dev/null
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT_ID 0x2011
+#define DEVICE_VER 0x0001
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D4, D1, E6, B5 }
+#define MATRIX_COL_PINS { F7, F6, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Encoder pins */
+#define ENCODERS_PAD_A { F4 }
+#define ENCODERS_PAD_B { F5 }
+#define ENCODER_RESOLUTION 4
+
+/* Underglow options */
+#define RGB_DI_PIN F4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 1
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
--- /dev/null
+#include "promicro.h"
+#include "encoder.h"
+
+#ifdef ENCODER_ENABLED
+void encoder_update_kb(int8_t index, bool clockwise) {
+ encoder_update_user(index, clockwise);
+}
+#endif
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+
+// Any changes to the layout names and/or definitions must also be made to info.json
+
+#define LAYOUT_ortho_4x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, K13 }, \
+ { K20, K21, K22, K23 }, \
+ { K30, K31, K32, K33 } \
+}
+
+#define LAYOUT_numpad_4x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, \
+ K20, K21, K22, K23, \
+ K31, K32 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, KC_NO }, \
+ { K20, K21, K22, K23 }, \
+ { KC_NO, K31, K32, KC_NO } \
+}
+
--- /dev/null
+# Sweet16 V2 (Pro Micro)
+
+A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Clueboard
+
+* Keyboard Maintainer: skullydazed
+* Hardware Supported: Sweet16 V2 PCB, Pro Micro
+* Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make 1upkeyboards/sweet16/v2/promicro:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+MCU = atmega32u4
+BOOTLOADER = caterina
+LINK_TIME_OPTIMIZATION_ENABLE=yes
+
+## Features
+CONSOLE_ENABLE = yes
+
+## On a Pro Micro you have to choose between underglow and the rotary encoder.
+RGBLIGHT_ENABLE = no
+ENCODER_ENABLE = yes
--- /dev/null
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT_ID 0x2011
+#define DEVICE_VER 0x0001
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B5, B7, B2, B0 }
+#define MATRIX_COL_PINS { B8, A0, A10, A9 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Encoder pins */
+#define ENCODERS_PAD_A { A2 }
+#define ENCODERS_PAD_B { A1 }
+#define ENCODER_RESOLUTION 4
--- /dev/null
+#include "proton_c.h"
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+
+// Any changes to the layout names and/or definitions must also be made to info.json
+
+#define LAYOUT_ortho_4x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, K13 }, \
+ { K20, K21, K22, K23 }, \
+ { K30, K31, K32, K33 } \
+}
+
+#define LAYOUT_numpad_4x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, \
+ K20, K21, K22, K23, \
+ K31, K32 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, KC_NO }, \
+ { K20, K21, K22, K23 }, \
+ { KC_NO, K31, K32, KC_NO } \
+}
+
--- /dev/null
+# Sweet16 V2 (Proton C)
+
+A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Clueboard
+
+* Keyboard Maintainer: skullydazed
+* Hardware Supported: Sweet16 V2 PCB, Proton C
+* Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make 1upkeyboards/sweet16/v2/proton_c:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+MCU = STM32F303
+
+## Features
+CONSOLE_ENABLE = yes
+ENCODER_ENABLE = yes
+AUDIO_ENABLE = yes
HCoop / jackhill / qmk / firmware.git / commitdiff