--- /dev/null
+# jtallbean
+QMK folders for relevant boards:
+
+split_65
--- /dev/null
+/*
+Copyright 2020 jtallbean
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER jtallbean
+#define PRODUCT split_65
+#define DESCRIPTION Split ergonomic keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 10 // Double rows for split keyboards. split_65 has 5, so define 10
+#define MATRIX_COLS 9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F1, F0, C7, B6 }
+#define MATRIX_COL_PINS { C6, B5, B4, D7, D6, D4, D2, D3, B7 } // B7 is not actually used, but it is needed since # of entries must equal 9
+#define MATRIX_ROW_PINS_RIGHT { E6, F0, F1, F7, D7 }
+#define MATRIX_COL_PINS_RIGHT { B4, B5, B6, C6, C7, D4, D6, D3, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define SPLIT_HAND_PIN D5
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+ #define NO_ACTION_MACRO
+ #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- /dev/null
+{
+ "keyboard_name": "split_65",
+ "url": "",
+ "maintainer": "jtallbean",
+ "width": 18.25,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {"x":0, "y":0},
+ {"label":"Esc", "x":1.25, "y":0},
+ {"label":"!", "x":2.25, "y":0},
+ {"label":"@", "x":3.25, "y":0},
+ {"label":"#", "x":4.25, "y":0},
+ {"label":"$", "x":5.25, "y":0},
+ {"label":"%", "x":6.25, "y":0},
+ {"label":"^", "x":7.25, "y":0},
+ {"label":"&", "x":9.25, "y":0},
+ {"label":"*", "x":10.25, "y":0},
+ {"label":"(", "x":11.25, "y":0},
+ {"label":")", "x":12.25, "y":0},
+ {"label":"_", "x":13.25, "y":0},
+ {"label":"+", "x":14.25, "y":0},
+ {"label":"~", "x":15.25, "y":0},
+ {"label":"Back", "x":16.25, "y":0},
+ {"label":"Insert", "x":17.25, "y":0},
+ {"label":"PgUp", "x":0, "y":1},
+ {"label":"Tab", "x":1.25, "y":1, "w":1.5},
+ {"label":"Q", "x":2.75, "y":1},
+ {"label":"W", "x":3.75, "y":1},
+ {"label":"E", "x":4.75, "y":1},
+ {"label":"R", "x":5.75, "y":1},
+ {"label":"T", "x":6.75, "y":1},
+ {"label":"Y", "x":8.75, "y":1},
+ {"label":"U", "x":9.75, "y":1},
+ {"label":"I", "x":10.75, "y":1},
+ {"label":"O", "x":11.75, "y":1},
+ {"label":"P", "x":12.75, "y":1},
+ {"label":"{", "x":13.75, "y":1},
+ {"label":"}", "x":14.75, "y":1},
+ {"label":"|", "x":15.75, "y":1, "w":1.5},
+ {"label":"Delete", "x":17.25, "y":1},
+ {"label":"PgDn", "x":0, "y":2},
+ {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75},
+ {"label":"A", "x":3, "y":2},
+ {"label":"S", "x":4, "y":2},
+ {"label":"D", "x":5, "y":2},
+ {"label":"F", "x":6, "y":2},
+ {"label":"G", "x":7, "y":2},
+ {"label":"H", "x":9, "y":2},
+ {"label":"J", "x":10, "y":2},
+ {"label":"K", "x":11, "y":2},
+ {"label":"L", "x":12, "y":2},
+ {"label":":", "x":13, "y":2},
+ {"label":"\"", "x":14, "y":2},
+ {"label":"Enter", "x":15, "y":2, "w":2.25},
+ {"label":"Home", "x":17.25, "y":2},
+ {"label":"Fn", "x":0, "y":3},
+ {"label":"Shift", "x":1.25, "y":3, "w":2.25},
+ {"label":"Z", "x":3.5, "y":3},
+ {"label":"X", "x":4.5, "y":3},
+ {"label":"C", "x":5.5, "y":3},
+ {"label":"V", "x":6.5, "y":3},
+ {"label":"B", "x":7.5, "y":3},
+ {"label":"N", "x":9.5, "y":3},
+ {"label":"M", "x":10.5, "y":3},
+ {"label":"<", "x":11.5, "y":3},
+ {"label":">", "x":12.5, "y":3},
+ {"label":"?", "x":13.5, "y":3},
+ {"label":"Shift", "x":14.5, "y":3, "w":1.75},
+ {"label":"\u2191", "x":16.25, "y":3},
+ {"label":"End", "x":17.25, "y":3},
+ {"label":"Code", "x":0, "y":4},
+ {"label":"Ctrl", "x":1.25, "y":4, "w":1.25},
+ {"label":"Win", "x":2.5, "y":4, "w":1.25},
+ {"label":"Alt", "x":3.75, "y":4, "w":1.25},
+ {"x":5, "y":4, "w":2.75},
+ {"x":8.75, "y":4, "w":2.25},
+ {"label":"Alt", "x":11, "y":4, "w":1.25},
+ {"label":"Win", "x":12.25, "y":4, "w":1.25},
+ {"label":"Ctrl", "x":13.5, "y":4, "w":1.25},
+ {"label":"\u2190", "x":15.25, "y":4},
+ {"label":"\u2193", "x":16.25, "y":4},
+ {"label":"\u2192", "x":17.25, "y":4}
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2020 jtallbean
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _DN,
+ _UP
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [_BASE] = LAYOUT_all(
+ KC_NO, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS,
+ KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME,
+ MO(_UP), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ MO(_DN), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ /* Down */
+ [_DN] = LAYOUT_all(
+ _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MUTE,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ /* Up */
+ [_UP] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, _______, _______, _______, KC_MPLY,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, KC_MNXT,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, KC_MPRV,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, _______, _______, _______, _______, _______, KC_MSTP,
+ _______, _______, _______, _______, _______, KC_P0, _______, _______, _______, _______, _______, _______
+ ),
+};
--- /dev/null
+
+
+# The default keymap for split_65
+
+This is the default layout that comes flashed on the split_65
--- /dev/null
+# split_65
+
+
+
+split_65 is a split, 65% layout keyboard with left function column designed for improved ergonomics and comfort.
+
+* Keyboard Maintainer: [jtallbean](https://github.com/samlli)
+* Hardware Supported: split_65
+* Hardware Availability: N/A
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/jtallbean/split_65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs
+SPLIT_KEYBOARD = yes # Enable split keyboard support
--- /dev/null
+/* Copyright 2020 jtallbean
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "split_65.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ // Set our LED pins as output
+ setPinOutput(B0);
+ writePinLow(B0);
+
+ matrix_init_user();
+}
+
+bool led_update_kb(led_t led_state) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ bool res = led_update_user(led_state);
+ if(res) {
+ // writePin sets the pin high for 1 and low for 0.
+ writePin(B0, led_state.caps_lock);
+ }
+ return res;
+}
--- /dev/null
+/* Copyright 2020 jtallbean
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+ #define LAYOUT_all( \
+ L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, R08, \
+ L10, L11, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, R18, \
+ L20, L21, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R27, R28, \
+ L30, L31, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R37, R38, \
+ L40, L41, L43, L44, L45, R40, R42, R43, R44, R45, R47, R48 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06, L07, KC_NO}, \
+ { L10, L11, KC_NO, L13, L14, L15, L16, L17, KC_NO}, \
+ { L20, L21, KC_NO, L23, L24, L25, L26, L27, KC_NO}, \
+ { L30, L31, KC_NO, L33, L34, L35, L36, L37, KC_NO}, \
+ { L40, L41, KC_NO, L43, L44, L45, KC_NO, KC_NO, KC_NO}, \
+ { R00, R01, R02, R03, R04, R05, R06, R07, R08 }, \
+ { R10, R11, R12, R13, R14, R15, R16, R17, R18 }, \
+ { R20, R21, R22, R23, R24, R25, KC_NO, R27, R28 }, \
+ { R30, R31, R32, R33, R34, R35, KC_NO, R37, R38 }, \
+ { R40, KC_NO, R42, R43, R44, R45, KC_NO, R47, R48 } \
+ }
HCoop / jackhill / qmk / firmware.git / commitdiff