-#ifndef CONFIG_H
-#define CONFIG_H
+/*
+Copyright 2020
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
-#define VENDOR_ID 0x1209
-#define PRODUCT_ID 0x2328
-#define DEVICE_VER 0x501
-#define MANUFACTURER K.T.E.C.
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x7169
+#define DEVICE_VER 0x0501
+#define MANUFACTURER KTEC
#define PRODUCT Daisy
#define DESCRIPTION qmk port for Daisy
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
#define BACKLIGHT_PIN D0
+// #define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 6
+#define RGB_DI_PIN C7
+#ifdef RGB_DI_PIN
+# define RGBLED_NUM 8
+# define RGBLIGHT_HUE_STEP 12
+# define RGBLIGHT_SAT_STEP 25
+# define RGBLIGHT_VAL_STEP 12
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+# define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
/*
* Force NKRO
*
*
*/
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-// ws2812 options
-#define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to
-#define RGBLIGHT_ANIMATIONS // run RGB animations
-#define RGBLED_NUM 8 // number of LEDs
-#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
-#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
-#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+ #define NO_ACTION_MACRO
+ #define NO_ACTION_FUNCTION
+#endif
/*
* MIDI options
*/
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
-#include "daisy.h"
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // output low
- DDRC |= (1<<PC6);
- PORTC &= ~(1<<PC6);
- } else {
- // Hi-Z
- DDRC &= ~(1<<PC6);
- PORTC &= ~(1<<PC6);
- }
- led_set_user(usb_led);
-}
\ No newline at end of file
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "daisy.h"
+
+void keyboard_pre_init_kb(void) {
+ led_init_ports();
+ keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+ setPinOutput(C6);
+ writePinHigh(C6);
+}
+
+bool led_update_kb(led_t led_state) {
+ if (led_update_user(led_state)) {
+ writePin(C6, !led_state.caps_lock);
+ }
+
+ return true;
+}
-#ifndef DAISY_H
-#define DAISY_H
-
-#include "quantum.h"
-
-#define LAYOUT( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \
- K30, K31, K32, K34, K35, K37, K38, K39 \
-) \
-{ \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \
- { K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A } \
-}
-
-#endif
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \
+ K30, K31, K32, K34, K35, K37, K38, K39 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \
+ { K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A } \
+}
+
+#define LAYOUT_625_space( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \
+ K30, K31, K32, K35, K38, K39 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \
+ { K30, K31, K32, KC_NO, KC_NO, K35, KC_NO, KC_NO, K38, K39, K3A } \
+}
-{
- "keyboard_name": "Daisy",
- "url": "",
- "maintainer": "qmk",
- "width": 12,
- "height": 4,
- "layouts": {
- "LAYOUT": {
- "key_count": 42,
- "layout": [{"label": "K00", "x": 0, "y": 0}, {"label": "K01", "x": 1, "y": 0}, {"label": "K02", "x": 2, "y": 0}, {"label": "K03", "x": 3, "y": 0}, {"label": "K04", "x": 4, "y": 0}, {"label": "K05", "x": 5, "y": 0}, {"label": "K06", "x": 6, "y": 0}, {"label": "K07", "x": 7, "y": 0}, {"label": "K08", "x": 8, "y": 0}, {"label": "K09", "x": 9, "y": 0}, {"label": "K0A", "x": 10, "y": 0}, {"label": "K3A", "x": 11, "y": 0}, {"label": "K10", "x": 0, "y": 1, "w": 1.25}, {"label": "K11", "x": 1.25, "y": 1}, {"label": "K12", "x": 2.25, "y": 1}, {"label": "K13", "x": 3.25, "y": 1}, {"label": "K14", "x": 4.25, "y": 1}, {"label": "K15", "x": 5.25, "y": 1}, {"label": "K16", "x": 6.25, "y": 1}, {"label": "K17", "x": 7.25, "y": 1}, {"label": "K18", "x": 8.25, "y": 1}, {"label": "K19", "x": 9.25, "y": 1}, {"label": "K1A", "x": 10.25, "y": 1, "w": 1.75}, {"label": "K20", "x": 0, "y": 2, "w": 1.75}, {"label": "K21", "x": 1.75, "y": 2}, {"label": "K22", "x": 2.75, "y": 2}, {"label": "K23", "x": 3.75, "y": 2}, {"label": "K24", "x": 4.75, "y": 2}, {"label": "K25", "x": 5.75, "y": 2}, {"label": "K26", "x": 6.75, "y": 2}, {"label": "K27", "x": 7.75, "y": 2}, {"label": "K28", "x": 8.75, "y": 2}, {"label": "K29", "x": 9.75, "y": 2}, {"label": "K2A", "x": 10.75, "y": 2, "w": 1.25}, {"label": "K30", "x": 0, "y": 3, "w": 1.25}, {"label": "K31", "x": 1.25, "y": 3}, {"label": "K32", "x": 2.25, "y": 3, "w": 1.25}, {"label": "K34", "x": 3.5, "y": 3, "w": 2.25}, {"label": "K35", "x": 5.75, "y": 3, "w": 2.75}, {"label": "K37", "x": 8.5, "y": 3, "w": 1.25}, {"label": "K38", "x": 9.75, "y": 3}, {"label": "K39", "x": 10.75, "y": 3, "w": 1.25}]
- },
-
- "LAYOUT_625_space": {
- "key_count": 40,
- "layout": [{"label": "K00", "x": 0, "y": 0}, {"label": "K01", "x": 1, "y": 0}, {"label": "K02", "x": 2, "y": 0}, {"label": "K03", "x": 3, "y": 0}, {"label": "K04", "x": 4, "y": 0}, {"label": "K05", "x": 5, "y": 0}, {"label": "K06", "x": 6, "y": 0}, {"label": "K07", "x": 7, "y": 0}, {"label": "K08", "x": 8, "y": 0}, {"label": "K09", "x": 9, "y": 0}, {"label": "K0A", "x": 10, "y": 0}, {"label": "K3A", "x": 11, "y": 0}, {"label": "K10", "x": 0, "y": 1, "w": 1.25}, {"label": "K11", "x": 1.25, "y": 1}, {"label": "K12", "x": 2.25, "y": 1}, {"label": "K13", "x": 3.25, "y": 1}, {"label": "K14", "x": 4.25, "y": 1}, {"label": "K15", "x": 5.25, "y": 1}, {"label": "K16", "x": 6.25, "y": 1}, {"label": "K17", "x": 7.25, "y": 1}, {"label": "K18", "x": 8.25, "y": 1}, {"label": "K19", "x": 9.25, "y": 1}, {"label": "K1A", "x": 10.25, "y": 1, "w": 1.75}, {"label": "K20", "x": 0, "y": 2, "w": 1.75}, {"label": "K21", "x": 1.75, "y": 2}, {"label": "K22", "x": 2.75, "y": 2}, {"label": "K23", "x": 3.75, "y": 2}, {"label": "K24", "x": 4.75, "y": 2}, {"label": "K25", "x": 5.75, "y": 2}, {"label": "K26", "x": 6.75, "y": 2}, {"label": "K27", "x": 7.75, "y": 2}, {"label": "K28", "x": 8.75, "y": 2}, {"label": "K29", "x": 9.75, "y": 2}, {"label": "K2A", "x": 10.75, "y": 2, "w": 1.25}, {"label": "K30", "x": 0, "y": 3, "w": 1.25}, {"label": "K31", "x": 1.25, "y": 3}, {"label": "K32", "x": 2.25, "y": 3}, {"x": 3.25, "y": 3, "w": 6.25}, {"label": "K38", "x": 9.5, "y": 3, "w": 1.25}, {"label": "K39", "x": 10.75, "y": 3, "w": 1.25}]
- }
- }
-}
+{
+ "keyboard_name": "Daisy",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 12,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 42,
+ "layout": [
+ {"x": 0, "y": 0},
+ {"x": 1, "y": 0},
+ {"x": 2, "y": 0},
+ {"x": 3, "y": 0},
+ {"x": 4, "y": 0},
+ {"x": 5, "y": 0},
+ {"x": 6, "y": 0},
+ {"x": 7, "y": 0},
+ {"x": 8, "y": 0},
+ {"x": 9, "y": 0},
+ {"x": 10, "y": 0},
+ {"x": 11, "y": 0},
+
+ {"x": 0, "y": 1, "w": 1.25},
+ {"x": 1.25, "y": 1},
+ {"x": 2.25, "y": 1},
+ {"x": 3.25, "y": 1},
+ {"x": 4.25, "y": 1},
+ {"x": 5.25, "y": 1},
+ {"x": 6.25, "y": 1},
+ {"x": 7.25, "y": 1},
+ {"x": 8.25, "y": 1},
+ {"x": 9.25, "y": 1},
+ {"x": 10.25, "y": 1, "w": 1.75},
+
+ {"x": 0, "y": 2, "w": 1.75},
+ {"x": 1.75, "y": 2},
+ {"x": 2.75, "y": 2},
+ {"x": 3.75, "y": 2},
+ {"x": 4.75, "y": 2},
+ {"x": 5.75, "y": 2},
+ {"x": 6.75, "y": 2},
+ {"x": 7.75, "y": 2},
+ {"x": 8.75, "y": 2},
+ {"x": 9.75, "y": 2},
+ {"x": 10.75, "y": 2, "w": 1.25},
+
+ {"x": 0, "y": 3, "w": 1.25},
+ {"x": 1.25, "y": 3},
+ {"x": 2.25, "y": 3, "w": 1.25},
+ {"x": 3.5, "y": 3, "w": 2.25},
+ {"x": 5.75, "y": 3, "w": 2.75},
+ {"x": 8.5, "y": 3, "w": 1.25},
+ {"x": 9.75, "y": 3},
+ {"x": 10.75, "y": 3, "w": 1.25}
+ ]
+ },
+ "LAYOUT_625_space": {
+ "key_count": 40,
+ "layout": [
+ {"x": 0, "y": 0},
+ {"x": 1, "y": 0},
+ {"x": 2, "y": 0},
+ {"x": 3, "y": 0},
+ {"x": 4, "y": 0},
+ {"x": 5, "y": 0},
+ {"x": 6, "y": 0},
+ {"x": 7, "y": 0},
+ {"x": 8, "y": 0},
+ {"x": 9, "y": 0},
+ {"x": 10, "y": 0},
+ {"x": 11, "y": 0},
+
+ {"x": 0, "y": 1, "w": 1.25},
+ {"x": 1.25, "y": 1},
+ {"x": 2.25, "y": 1},
+ {"x": 3.25, "y": 1},
+ {"x": 4.25, "y": 1},
+ {"x": 5.25, "y": 1},
+ {"x": 6.25, "y": 1},
+ {"x": 7.25, "y": 1},
+ {"x": 8.25, "y": 1},
+ {"x": 9.25, "y": 1},
+ {"x": 10.25, "y": 1, "w": 1.75},
+
+ {"x": 0, "y": 2, "w": 1.75},
+ {"x": 1.75, "y": 2},
+ {"x": 2.75, "y": 2},
+ {"x": 3.75, "y": 2},
+ {"x": 4.75, "y": 2},
+ {"x": 5.75, "y": 2},
+ {"x": 6.75, "y": 2},
+ {"x": 7.75, "y": 2},
+ {"x": 8.75, "y": 2},
+ {"x": 9.75, "y": 2},
+ {"x": 10.75, "y": 2, "w": 1.25},
+
+ {"x": 0, "y": 3, "w": 1.25},
+ {"x": 1.25, "y": 3},
+ {"x": 2.25, "y": 3},
+ {"x": 3.25, "y": 3, "w": 6.25},
+ {"x": 9.5, "y": 3, "w": 1.25},
+ {"x": 10.75, "y": 3, "w": 1.25}
+ ]
+ }
+ }
+}
-#include QMK_KEYBOARD_H
-
-
-// Layer shorthand
-#define _BL 0
-#define _LW 1
-#define _RS 2
-
-enum layer_keycodes {
- QWERTY = SAFE_RANGE, LOWER, RAISE
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- /* Base Layer
- * .-----------------------------------------------------------------------.
- * | ESC | Q | W | E | R | T | Y | U | I | O | P | \| |
- * |-----------------------------------------------------------------------|
- * | TAB | A | S | D | F | G | H | J | K | L | ENTER |
- * |-----------------------------------------------------------------------|
- * | LSHIFT | Z | X | C | V | B | N | M | ,< | .> | /? |
- * |-----------------------------------------------------------------------|
- * | LCTRL | LGUI | LALT | SPACE | BACKSPACE | LW | RS | RALT |
- * '-----------------------------------------------------------------------'
- */
- [_BL] = LAYOUT(
- GRAVE_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
- KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, LOWER, RAISE, KC_RALT
- ),
-
- /* Function Layer
- * .-----------------------------------------------------------------------.
- * | GRV | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | -_ |
- * |-----------------------------------------------------------------------|
- * | | =+ | UP | | | | [{ | ]} | ;: | '" | |
- * |-----------------------------------------------------------------------|
- * | | LEFT| DOWN |RIGHT| | | | | | | |
- * |-----------------------------------------------------------------------|
- * | | | | | DELETE | | | |
- * '-----------------------------------------------------------------------'
- */
-
- [_LW] = LAYOUT(
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
- KC_TRNS, KC_EQL, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_TRNS,
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
- KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS
- ),
-
- /* Second Function Layer
- * .-----------------------------------------------------------------------.
- * | RST | F1 | F2 | F3 | F4 | F5 | F6 | | HOME| PGUP| | |
- * |-----------------------------------------------------------------------|
- * | | F7 | F8 | F9 | F10 | F11 | F12 | | END | PGDN| |
- * |-----------------------------------------------------------------------|
- * | |RGBtog|RGBmod|RGBhud|RGBhui|RGBvad|RGBvai|RGBsad|RGBsai|BL| |
- * |-----------------------------------------------------------------------|
- * | | | | | | | | |
- * '-----------------------------------------------------------------------'
- */
- [_RS] = LAYOUT(
- RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,
- KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_END, KC_PGDN, KC_TRNS,
- KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP, KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
- ),
-
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case LOWER:
- if(record->event.pressed){
- layer_on(_LW);
- } else {
- layer_off(_LW);
- }
- return false;
- break;
- case RAISE:
- if(record->event.pressed){
- layer_on(_RS);
- } else {
- layer_off(_RS);
- }
- return false;
- break;
- }
- return true;
-};
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BL,
+ _LW,
+ _RS
+};
+
+#define LOWER MO(_LW)
+#define RAISE MO(_RS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base Layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │Esc│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ \ │
+ * ├───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
+ * │Tab │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Enter│
+ * ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬────┤
+ * │Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │
+ * ├────┬─┴─┬─┴──┬┴───┴───┼───┴───┴──┬┴───┼───┼────┤
+ * │Ctrl│GUI│Alt │ │ Backspace│Lowr│Rse│ Alt│
+ * └────┴───┴────┴────────┴──────────┴────┴───┴────┘
+ */
+ [_BL] = LAYOUT(
+ KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, LOWER, RAISE, KC_RALT
+ ),
+
+ /* Function Layer 1 (Lower)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │
+ * └───┴┬──┴┬──┴┬──┴───┴───┴┬──┴┬──┴┬──┴┬──┴┬──┴───┘
+ * │ │ = │ ▴ │ │ │ │ [ │ ] │ ; │ ' │ │
+ * ├────└─┬─┴─┬─┴─┬───┐─┴─┬─└───┴───┴───┴───┘─┬────┤
+ * │ │ ◂ │ ▾ │ ▸ │ │ │ │ │ │ │ │
+ * ├────┬─└───┴───┴───┘───┌──────────┐┴───┼───┼────┤
+ * │ │ │ │ │ Delete │ │ │ │
+ * └────┴───┴────┴────────└──────────┘────┴───┴────┘
+ */
+ [_LW] = LAYOUT(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+ _______, KC_EQL, KC_UP, _______, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, _______,
+ _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, KC_DEL, _______, _______, _______
+ ),
+
+ /* Function Layer 2 (Raise)
+ * ┌───┬───┬───┬───┬───┬───┬───┐───┌───┬───┐───┬───┐
+ * │Rst│F1 │F2 │F3 │F4 │F5 │F6 │ │Hom│PgU│ │ │
+ * └───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐──└┬──┴┬──┴┐──┴───┤
+ * │ │F7 │F8 │F9 │F10│F11│F12│ │ ; │ ' │ │
+ * ├────└─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴───┴───┴───┴─┐────┤
+ * │ │RGB│Mod│HuD│HuI│VaD│VaI│SaD│SaI│BLS│ │
+ * ├────┬─└───┴───┴───┴───┴───┴───┴───┴───┴───┘────┤
+ * │ │ │ │ │ │ │ │ │
+ * └────┴───┴────┴────────┴──────────┴────┴───┴────┘
+ */
+ [_RS] = LAYOUT(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_HOME, KC_PGUP, _______, _______,
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_END, KC_PGDN, _______,
+ _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
-
-
-# Default Daisy Layout
-
-This is the default layout as offered by KPRepublic's TMK firmware for the Daisy with a few minor tweaks for usability made by me.
+# The default keymap for Daisy
-# Daisy
-
-A 40% keyboard kit sold by KPRepublic.
-
-Keyboard Maintainer: westfoxtrot (https://github.com/westfoxtrot)
-Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2
-Hardware Availability: http://tinyurl.com/yc26lq22
-
-Make example for this keyboard (after setting up your build environment):
-
- make daisy:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-
-# Other Keymaps
-
-The "default" keymap included is the layout I personally use on the Daisy and the one I have found the most comfortable.
-
-A printable picture showing this layout is available here: https://imgur.com/9mSF0yf
-
-
-```
-$ make daisy:[default|<name>]
-```
-
-# Bootloader
-
-I personally had issues with the bootloader on my Daisy PCB and was unable to flash a firmware to the board after the first time. I replaced the bootloader with the one available in the repository at ../../util/bootloader_atmega32u4_1_0_0.hex
+# Daisy
+
+
+
+A 40% keyboard kit sold by KPrepublic.
+
+* Keyboard Maintainer: [westfoxtrot](https://github.com/westfoxtrot)
+* Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2
+* Hardware Availability: [KPrepublic](https://kprepublic.com/products/daisy-40-custom-keyboard-pcb)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make daisy:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-# QMK Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
+# Build Options
+# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs
HCoop / jackhill / qmk / firmware.git / commitdiff