#include QMK_KEYBOARD_H
-#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
KC_SAMPLEMACRO,
};
-#define KC______ KC_TRNS
-#define KC_XXXXX KC_NO
-#define KC_LOWER LOWER
-#define KC_RAISE RAISE
-#define KC_RST RESET
-#define KC_LRST RGBRST
-#define KC_LTOG RGB_TOG
-#define KC_LHUI RGB_HUI
-#define KC_LHUD RGB_HUD
-#define KC_LSAI RGB_SAI
-#define KC_LSAD RGB_SAD
-#define KC_LVAI RGB_VAI
-#define KC_LVAD RGB_VAD
-#define KC_LMOD RGB_MOD
-#define KC_CTLTB CTL_T(KC_TAB)
-#define KC_GUIEI GUI_T(KC_LANG2)
-#define KC_ALTKN ALT_T(KC_LANG1)
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_QWERTY] = LAYOUT_kc( \
+ [_QWERTY] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
- ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- CTLTB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,\
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ KC_LGUI, LOWER,KC_SPC, KC_ENT, RAISE,KC_RALT \
//`--------------------' `--------------------'
),
- [_LOWER] = LAYOUT_kc( \
+ [_LOWER] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- CTLTB, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, XXXXX,\
+ KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO,KC_NO,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- LSFT, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, XXXXX,\
+ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ KC_LGUI, LOWER,KC_SPC, KC_ENT, RAISE,KC_RALT \
//`--------------------' `--------------------'
),
- [_RAISE] = LAYOUT_kc( \
+ [_RAISE] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
- ESC, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\
+ KC_ESC,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- CTLTB, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\
+ KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\
+ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ KC_LGUI, LOWER,KC_SPC, KC_ENT, RAISE,KC_RALT \
//`--------------------' `--------------------'
),
- [_ADJUST] = LAYOUT_kc( \
+ [_ADJUST] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
- RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ RESET,RGBRST, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
- LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ KC_LGUI, LOWER,KC_SPC, KC_ENT, RAISE,KC_RALT \
//`--------------------' `--------------------'
)
};
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
- matrix_write_ln(matrix, read_keylogs());
+ //matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
- break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
- break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
- break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
layer_off(_ADJUST);
}
return false;
- break;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
}
#endif
return false;
- break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
--- /dev/null
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
--- /dev/null
+#include QMK_KEYBOARD_H
+#ifdef PROTOCOL_LUFA
+ #include "lufa.h"
+ #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST,
+ BACKLIT,
+ RGBRST
+};
+
+enum macro_keycodes {
+ KC_SAMPLEMACRO,
+};
+
+#define KC______ KC_TRNS
+#define KC_XXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_RST RESET
+#define KC_LRST RGBRST
+#define KC_LTOG RGB_TOG
+#define KC_LHUI RGB_HUI
+#define KC_LHUD RGB_HUD
+#define KC_LSAI RGB_SAI
+#define KC_LSAD RGB_SAD
+#define KC_LVAI RGB_VAI
+#define KC_LVAD RGB_VAD
+#define KC_LMOD RGB_MOD
+#define KC_GUIEI GUI_T(KC_LANG2)
+#define KC_ALTKN ALT_T(KC_LANG1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ESC,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ ),
+
+ [_LOWER] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LCTL, F1, F2, F3, F4, F5, LEFT, DOWN, UP, RIGHT, XXXXX, XXXXX,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LSFT, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ ),
+
+ [_RAISE] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LCTL, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ ),
+
+ [_ADJUST] = LAYOUT_kc( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
+ //`--------------------' `--------------------'
+ )
+};
+
+int RGB_current_mode;
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+ if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+ layer_on(layer3);
+ } else {
+ layer_off(layer3);
+ }
+}
+
+void matrix_init_user(void) {
+ #ifdef RGBLIGHT_ENABLE
+ RGB_current_mode = rgblight_config.mode;
+ #endif
+ //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+ #ifdef SSD1306OLED
+ iota_gfx_init(!has_usb()); // turns on the display
+ #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+ iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+ if (is_master) {
+ // If you want to change the display of OLED, you need to change here
+ matrix_write_ln(matrix, read_layer_state());
+ matrix_write_ln(matrix, read_keylog());
+ matrix_write_ln(matrix, read_keylogs());
+ //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+ //matrix_write_ln(matrix, read_host_led_state());
+ //matrix_write_ln(matrix, read_timelog());
+ } else {
+ matrix_write(matrix, read_logo());
+ }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+ matrix_clear(&matrix);
+ matrix_render_user(&matrix);
+ matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+#ifdef SSD1306OLED
+ set_keylog(keycode, record);
+#endif
+ // set_timelog();
+ }
+
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ case RGB_MOD:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ rgblight_mode(RGB_current_mode);
+ rgblight_step();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ return false;
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+
+# If you want to change the display of OLED, you need to change here
+SRC += ./lib/glcdfont.c \
+ ./lib/rgb_state_reader.c \
+ ./lib/layer_state_reader.c \
+ ./lib/logo_reader.c \
+ ./lib/keylogger.c \
+ # ./lib/mode_icon_reader.c \
+ # ./lib/host_led_state_reader.c \
+ # ./lib/timelogger.c \
HCoop / jackhill / qmk / firmware.git / commitdiff