keyboards/duck/lightsaver/rules.mk

   1 # MCU name
   2 MCU = atmega32u4
   3
   4 # Processor frequency.
   5 #     This will define a symbol, F_CPU, in all source code files equal to the
   6 #     processor frequency in Hz. You can then use this symbol in your source code to
   7 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
   8 #     automatically to create a 32-bit value in your source code.
   9 #
  10 #     This will be an integer division of F_USB below, as it is sourced by
  11 #     F_USB after it has run through any CPU prescalers. Note that this value
  12 #     does not *change* the processor frequency - it should merely be updated to
  13 #     reflect the processor speed set externally so that the code can use accurate
  14 #     software delays.
  15 F_CPU = 16000000
  16
  17
  18 #
  19 # LUFA specific
  20 #
  21 # Target architecture (see library "Board Types" documentation).
  22 ARCH = AVR8
  23
  24 # Input clock frequency.
  25 #     This will define a symbol, F_USB, in all source code files equal to the
  26 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  27 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  28 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  29 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  30 #     at the end, this will be done automatically to create a 32-bit value in your
  31 #     source code.
  32 #
  33 #     If no clock division is performed on the input clock inside the AVR (via the
  34 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  35 F_USB = $(F_CPU)
  36
  37 # Interrupt driven control endpoint task(+60)
  38 #OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  39
  40
  41 # Boot Section Size in *bytes*
  42 #   Teensy halfKay   512
  43 #   Teensy++ halfKay 1024
  44 #   Atmel DFU loader 4096
  45 #   LUFA bootloader  4096
  46 #   USBaspLoader     2048
  47 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  48
  49
  50 # Build Options
  51 #   change yes to no to disable
  52 #
  53 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
  54 MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
  55 EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
  56 CONSOLE_ENABLE = no         # Console for debug(+400)
  57 COMMAND_ENABLE = yes        # Commands for debug and configuration
  58 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
  59 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
  60 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
  61 NKRO_ENABLE = yes           # USB Nkey Rollover
  62 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
  63 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
  64 UNICODE_ENABLE = no         # Unicode
  65 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
  66 AUDIO_ENABLE = no           # Audio output on port C6
  67 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
  68 RGBLIGHT_ENABLE = yes
  69
  70 CUSTOM_MATRIX = yes
  71 SRC += indicator_leds.c \
  72                          matrix.c duck_led/duck_led.c