keyboards/nk65/keymaps/default_via/rules.mk

   1 # project specific files
   2 SRC =   keyboards/wilba_tech/wt_main.c \
   3                 keyboards/wilba_tech/wt_rgb_backlight.c \
   4                 drivers/issi/is31fl3733.c \
   5                 quantum/color.c \
   6                 drivers/arm/i2c_master.c
   7
   8 ## chip/board settings
   9 #   the next two should match the directories in
  10 #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
  11 MCU_FAMILY = STM32
  12 MCU_SERIES = STM32F3xx
  13
  14 # Linker script to use
  15 #   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
  16 #   or <this_dir>/ld/
  17 MCU_LDSCRIPT = STM32F303xC
  18
  19 # Startup code to use
  20 #  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
  21 MCU_STARTUP = stm32f3xx
  22
  23 # Board: it should exist either in <chibios>/os/hal/boards/
  24 #  or <this_dir>/boards
  25 BOARD = GENERIC_STM32_F303XC
  26
  27 # Cortex version
  28 MCU  = cortex-m4
  29
  30 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
  31 ARMV = 7
  32
  33 USE_FPU = yes
  34
  35 # Vector table for application
  36 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
  37 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
  38 # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
  39 OPT_DEFS =
  40
  41 # Do not put the microcontroller into power saving mode
  42 # when we get USB suspend event. We want it to keep updating
  43 # backlight effects.
  44 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
  45
  46 # Options to pass to dfu-util when flashing
  47 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
  48 DFU_SUFFIX_ARGS = -p DF11 -v 0483
  49
  50 # Build Options
  51 #   comment out to disable the options.
  52 #
  53 BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
  54 BOOTMAGIC_ENABLE = no              # Virtual DIP switch configuration
  55 MOUSEKEY_ENABLE = yes              # Mouse keys
  56 EXTRAKEY_ENABLE = yes              # Audio control and System control
  57 CONSOLE_ENABLE = no                # Console for debug
  58 COMMAND_ENABLE = no                # Commands for debug and configuration
  59 SLEEP_LED_ENABLE = no              # Breathing sleep LED during USB suspend
  60 NKRO_ENABLE = yes                  # USB Nkey Rollover
  61 AUDIO_ENABLE = no                  # Audio output on port C6
  62 NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
  63 #SERIAL_LINK_ENABLE = yes
  64
  65 RAW_ENABLE = yes
  66 DYNAMIC_KEYMAP_ENABLE = yes
  67 CIE1931_CURVE = yes