Address #1689 by using a formula to define the breathing curve (#1692)
[jackhill/qmk/firmware.git] / quantum / rgblight.c
1 /* Copyright 2016-2017 Yang Liu
2 *
3 * This program is free software: you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License as published by
5 * the Free Software Foundation, either version 2 of the License, or
6 * (at your option) any later version.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program. If not, see <http://www.gnu.org/licenses/>.
15 */
16 #include <math.h>
17 #include <avr/eeprom.h>
18 #include <avr/interrupt.h>
19 #include <util/delay.h>
20 #include "progmem.h"
21 #include "timer.h"
22 #include "rgblight.h"
23 #include "debug.h"
24 #include "led_tables.h"
25
26 __attribute__ ((weak))
27 const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
28 __attribute__ ((weak))
29 const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
30 __attribute__ ((weak))
31 const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
32 __attribute__ ((weak))
33 const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
34 __attribute__ ((weak))
35 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
36 __attribute__ ((weak))
37 const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
38
39 rgblight_config_t rgblight_config;
40 rgblight_config_t inmem_config;
41
42 LED_TYPE led[RGBLED_NUM];
43 uint8_t rgblight_inited = 0;
44 bool rgblight_timer_enabled = false;
45
46 void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) {
47 uint8_t r = 0, g = 0, b = 0, base, color;
48
49 if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
50 r = val;
51 g = val;
52 b = val;
53 } else {
54 base = ((255 - sat) * val) >> 8;
55 color = (val - base) * (hue % 60) / 60;
56
57 switch (hue / 60) {
58 case 0:
59 r = val;
60 g = base + color;
61 b = base;
62 break;
63 case 1:
64 r = val - color;
65 g = val;
66 b = base;
67 break;
68 case 2:
69 r = base;
70 g = val;
71 b = base + color;
72 break;
73 case 3:
74 r = base;
75 g = val - color;
76 b = val;
77 break;
78 case 4:
79 r = base + color;
80 g = base;
81 b = val;
82 break;
83 case 5:
84 r = val;
85 g = base;
86 b = val - color;
87 break;
88 }
89 }
90 r = pgm_read_byte(&CIE1931_CURVE[r]);
91 g = pgm_read_byte(&CIE1931_CURVE[g]);
92 b = pgm_read_byte(&CIE1931_CURVE[b]);
93
94 setrgb(r, g, b, led1);
95 }
96
97 void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) {
98 (*led1).r = r;
99 (*led1).g = g;
100 (*led1).b = b;
101 }
102
103
104 uint32_t eeconfig_read_rgblight(void) {
105 return eeprom_read_dword(EECONFIG_RGBLIGHT);
106 }
107 void eeconfig_update_rgblight(uint32_t val) {
108 eeprom_update_dword(EECONFIG_RGBLIGHT, val);
109 }
110 void eeconfig_update_rgblight_default(void) {
111 dprintf("eeconfig_update_rgblight_default\n");
112 rgblight_config.enable = 1;
113 rgblight_config.mode = 1;
114 rgblight_config.hue = 0;
115 rgblight_config.sat = 255;
116 rgblight_config.val = 255;
117 eeconfig_update_rgblight(rgblight_config.raw);
118 }
119 void eeconfig_debug_rgblight(void) {
120 dprintf("rgblight_config eprom\n");
121 dprintf("rgblight_config.enable = %d\n", rgblight_config.enable);
122 dprintf("rghlight_config.mode = %d\n", rgblight_config.mode);
123 dprintf("rgblight_config.hue = %d\n", rgblight_config.hue);
124 dprintf("rgblight_config.sat = %d\n", rgblight_config.sat);
125 dprintf("rgblight_config.val = %d\n", rgblight_config.val);
126 }
127
128 void rgblight_init(void) {
129 debug_enable = 1; // Debug ON!
130 dprintf("rgblight_init called.\n");
131 rgblight_inited = 1;
132 dprintf("rgblight_init start!\n");
133 if (!eeconfig_is_enabled()) {
134 dprintf("rgblight_init eeconfig is not enabled.\n");
135 eeconfig_init();
136 eeconfig_update_rgblight_default();
137 }
138 rgblight_config.raw = eeconfig_read_rgblight();
139 if (!rgblight_config.mode) {
140 dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n");
141 eeconfig_update_rgblight_default();
142 rgblight_config.raw = eeconfig_read_rgblight();
143 }
144 eeconfig_debug_rgblight(); // display current eeprom values
145
146 #ifdef RGBLIGHT_ANIMATIONS
147 rgblight_timer_init(); // setup the timer
148 #endif
149
150 if (rgblight_config.enable) {
151 rgblight_mode(rgblight_config.mode);
152 }
153 }
154
155 void rgblight_update_dword(uint32_t dword) {
156 rgblight_config.raw = dword;
157 eeconfig_update_rgblight(rgblight_config.raw);
158 if (rgblight_config.enable)
159 rgblight_mode(rgblight_config.mode);
160 else {
161 #ifdef RGBLIGHT_ANIMATIONS
162 rgblight_timer_disable();
163 #endif
164 rgblight_set();
165 }
166 }
167
168 void rgblight_increase(void) {
169 uint8_t mode = 0;
170 if (rgblight_config.mode < RGBLIGHT_MODES) {
171 mode = rgblight_config.mode + 1;
172 }
173 rgblight_mode(mode);
174 }
175 void rgblight_decrease(void) {
176 uint8_t mode = 0;
177 // Mode will never be < 1. If it ever is, eeprom needs to be initialized.
178 if (rgblight_config.mode > 1) {
179 mode = rgblight_config.mode - 1;
180 }
181 rgblight_mode(mode);
182 }
183 void rgblight_step(void) {
184 uint8_t mode = 0;
185 mode = rgblight_config.mode + 1;
186 if (mode > RGBLIGHT_MODES) {
187 mode = 1;
188 }
189 rgblight_mode(mode);
190 }
191 void rgblight_step_reverse(void) {
192 uint8_t mode = 0;
193 mode = rgblight_config.mode - 1;
194 if (mode < 1) {
195 mode = RGBLIGHT_MODES;
196 }
197 rgblight_mode(mode);
198 }
199
200 uint32_t rgblight_get_mode(void) {
201 if (!rgblight_config.enable) {
202 return false;
203 }
204
205 return rgblight_config.mode;
206 }
207
208 void rgblight_mode(uint8_t mode) {
209 if (!rgblight_config.enable) {
210 return;
211 }
212 if (mode < 1) {
213 rgblight_config.mode = 1;
214 } else if (mode > RGBLIGHT_MODES) {
215 rgblight_config.mode = RGBLIGHT_MODES;
216 } else {
217 rgblight_config.mode = mode;
218 }
219 eeconfig_update_rgblight(rgblight_config.raw);
220 xprintf("rgblight mode: %u\n", rgblight_config.mode);
221 if (rgblight_config.mode == 1) {
222 #ifdef RGBLIGHT_ANIMATIONS
223 rgblight_timer_disable();
224 #endif
225 } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 24) {
226 // MODE 2-5, breathing
227 // MODE 6-8, rainbow mood
228 // MODE 9-14, rainbow swirl
229 // MODE 15-20, snake
230 // MODE 21-23, knight
231 // MODE 24, xmas
232 // MODE 25-34, static rainbow
233
234 #ifdef RGBLIGHT_ANIMATIONS
235 rgblight_timer_enable();
236 #endif
237 } else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) {
238 // MODE 25-34, static gradient
239
240 #ifdef RGBLIGHT_ANIMATIONS
241 rgblight_timer_disable();
242 #endif
243 }
244 rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
245 }
246
247 void rgblight_toggle(void) {
248 rgblight_config.enable ^= 1;
249 eeconfig_update_rgblight(rgblight_config.raw);
250 xprintf("rgblight toggle: rgblight_config.enable = %u\n", rgblight_config.enable);
251 if (rgblight_config.enable) {
252 rgblight_mode(rgblight_config.mode);
253 } else {
254 #ifdef RGBLIGHT_ANIMATIONS
255 rgblight_timer_disable();
256 #endif
257 _delay_ms(50);
258 rgblight_set();
259 }
260 }
261
262 void rgblight_enable(void) {
263 rgblight_config.enable = 1;
264 eeconfig_update_rgblight(rgblight_config.raw);
265 xprintf("rgblight enable: rgblight_config.enable = %u\n", rgblight_config.enable);
266 rgblight_mode(rgblight_config.mode);
267 }
268
269
270 void rgblight_increase_hue(void) {
271 uint16_t hue;
272 hue = (rgblight_config.hue+RGBLIGHT_HUE_STEP) % 360;
273 rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
274 }
275 void rgblight_decrease_hue(void) {
276 uint16_t hue;
277 if (rgblight_config.hue-RGBLIGHT_HUE_STEP < 0) {
278 hue = (rgblight_config.hue + 360 - RGBLIGHT_HUE_STEP) % 360;
279 } else {
280 hue = (rgblight_config.hue - RGBLIGHT_HUE_STEP) % 360;
281 }
282 rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
283 }
284 void rgblight_increase_sat(void) {
285 uint8_t sat;
286 if (rgblight_config.sat + RGBLIGHT_SAT_STEP > 255) {
287 sat = 255;
288 } else {
289 sat = rgblight_config.sat + RGBLIGHT_SAT_STEP;
290 }
291 rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
292 }
293 void rgblight_decrease_sat(void) {
294 uint8_t sat;
295 if (rgblight_config.sat - RGBLIGHT_SAT_STEP < 0) {
296 sat = 0;
297 } else {
298 sat = rgblight_config.sat - RGBLIGHT_SAT_STEP;
299 }
300 rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
301 }
302 void rgblight_increase_val(void) {
303 uint8_t val;
304 if (rgblight_config.val + RGBLIGHT_VAL_STEP > 255) {
305 val = 255;
306 } else {
307 val = rgblight_config.val + RGBLIGHT_VAL_STEP;
308 }
309 rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
310 }
311 void rgblight_decrease_val(void) {
312 uint8_t val;
313 if (rgblight_config.val - RGBLIGHT_VAL_STEP < 0) {
314 val = 0;
315 } else {
316 val = rgblight_config.val - RGBLIGHT_VAL_STEP;
317 }
318 rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
319 }
320
321 void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) {
322 inmem_config.raw = rgblight_config.raw;
323 if (rgblight_config.enable) {
324 LED_TYPE tmp_led;
325 sethsv(hue, sat, val, &tmp_led);
326 inmem_config.hue = hue;
327 inmem_config.sat = sat;
328 inmem_config.val = val;
329 // dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val);
330 rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
331 }
332 }
333 void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
334 if (rgblight_config.enable) {
335 if (rgblight_config.mode == 1) {
336 // same static color
337 rgblight_sethsv_noeeprom(hue, sat, val);
338 } else {
339 // all LEDs in same color
340 if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
341 // breathing mode, ignore the change of val, use in memory value instead
342 val = rgblight_config.val;
343 } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) {
344 // rainbow mood and rainbow swirl, ignore the change of hue
345 hue = rgblight_config.hue;
346 } else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) {
347 // static gradient
348 uint16_t _hue;
349 int8_t direction = ((rgblight_config.mode - 25) % 2) ? -1 : 1;
350 uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[(rgblight_config.mode - 25) / 2]);
351 for (uint8_t i = 0; i < RGBLED_NUM; i++) {
352 _hue = (range / RGBLED_NUM * i * direction + hue + 360) % 360;
353 dprintf("rgblight rainbow set hsv: %u,%u,%d,%u\n", i, _hue, direction, range);
354 sethsv(_hue, sat, val, (LED_TYPE *)&led[i]);
355 }
356 rgblight_set();
357 }
358 }
359 rgblight_config.hue = hue;
360 rgblight_config.sat = sat;
361 rgblight_config.val = val;
362 eeconfig_update_rgblight(rgblight_config.raw);
363 xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
364 }
365 }
366
367 void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) {
368 // dprintf("rgblight set rgb: %u,%u,%u\n", r,g,b);
369 for (uint8_t i = 0; i < RGBLED_NUM; i++) {
370 led[i].r = r;
371 led[i].g = g;
372 led[i].b = b;
373 }
374 rgblight_set();
375 }
376
377 #ifndef RGBLIGHT_CUSTOM_DRIVER
378 void rgblight_set(void) {
379 if (rgblight_config.enable) {
380 #ifdef RGBW
381 ws2812_setleds_rgbw(led, RGBLED_NUM);
382 #else
383 ws2812_setleds(led, RGBLED_NUM);
384 #endif
385 } else {
386 for (uint8_t i = 0; i < RGBLED_NUM; i++) {
387 led[i].r = 0;
388 led[i].g = 0;
389 led[i].b = 0;
390 }
391 #ifdef RGBW
392 ws2812_setleds_rgbw(led, RGBLED_NUM);
393 #else
394 ws2812_setleds(led, RGBLED_NUM);
395 #endif
396 }
397 }
398 #endif
399
400 #ifdef RGBLIGHT_ANIMATIONS
401
402 // Animation timer -- AVR Timer3
403 void rgblight_timer_init(void) {
404 // static uint8_t rgblight_timer_is_init = 0;
405 // if (rgblight_timer_is_init) {
406 // return;
407 // }
408 // rgblight_timer_is_init = 1;
409 // /* Timer 3 setup */
410 // TCCR3B = _BV(WGM32) // CTC mode OCR3A as TOP
411 // | _BV(CS30); // Clock selelct: clk/1
412 // /* Set TOP value */
413 // uint8_t sreg = SREG;
414 // cli();
415 // OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff;
416 // OCR3AL = RGBLED_TIMER_TOP & 0xff;
417 // SREG = sreg;
418
419 rgblight_timer_enabled = true;
420 }
421 void rgblight_timer_enable(void) {
422 rgblight_timer_enabled = true;
423 dprintf("TIMER3 enabled.\n");
424 }
425 void rgblight_timer_disable(void) {
426 rgblight_timer_enabled = false;
427 dprintf("TIMER3 disabled.\n");
428 }
429 void rgblight_timer_toggle(void) {
430 rgblight_timer_enabled ^= rgblight_timer_enabled;
431 dprintf("TIMER3 toggled.\n");
432 }
433
434 void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) {
435 rgblight_enable();
436 rgblight_mode(1);
437 rgblight_setrgb(r, g, b);
438 }
439
440 void rgblight_task(void) {
441 if (rgblight_timer_enabled) {
442 // mode = 1, static light, do nothing here
443 if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
444 // mode = 2 to 5, breathing mode
445 rgblight_effect_breathing(rgblight_config.mode - 2);
446 } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) {
447 // mode = 6 to 8, rainbow mood mod
448 rgblight_effect_rainbow_mood(rgblight_config.mode - 6);
449 } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) {
450 // mode = 9 to 14, rainbow swirl mode
451 rgblight_effect_rainbow_swirl(rgblight_config.mode - 9);
452 } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) {
453 // mode = 15 to 20, snake mode
454 rgblight_effect_snake(rgblight_config.mode - 15);
455 } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) {
456 // mode = 21 to 23, knight mode
457 rgblight_effect_knight(rgblight_config.mode - 21);
458 } else if (rgblight_config.mode == 24) {
459 // mode = 24, christmas mode
460 rgblight_effect_christmas();
461 }
462 }
463 }
464
465 // Effects
466 void rgblight_effect_breathing(uint8_t interval) {
467 static uint8_t pos = 0;
468 static uint16_t last_timer = 0;
469 float val;
470
471 if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) {
472 return;
473 }
474 last_timer = timer_read();
475
476
477 // http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/
478 val = (exp(sin((pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E));
479 rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, val);
480 pos = (pos + 1) % 256;
481 }
482 void rgblight_effect_rainbow_mood(uint8_t interval) {
483 static uint16_t current_hue = 0;
484 static uint16_t last_timer = 0;
485
486 if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval])) {
487 return;
488 }
489 last_timer = timer_read();
490 rgblight_sethsv_noeeprom(current_hue, rgblight_config.sat, rgblight_config.val);
491 current_hue = (current_hue + 1) % 360;
492 }
493 void rgblight_effect_rainbow_swirl(uint8_t interval) {
494 static uint16_t current_hue = 0;
495 static uint16_t last_timer = 0;
496 uint16_t hue;
497 uint8_t i;
498 if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_RAINBOW_SWIRL_INTERVALS[interval / 2])) {
499 return;
500 }
501 last_timer = timer_read();
502 for (i = 0; i < RGBLED_NUM; i++) {
503 hue = (360 / RGBLED_NUM * i + current_hue) % 360;
504 sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]);
505 }
506 rgblight_set();
507
508 if (interval % 2) {
509 current_hue = (current_hue + 1) % 360;
510 } else {
511 if (current_hue - 1 < 0) {
512 current_hue = 359;
513 } else {
514 current_hue = current_hue - 1;
515 }
516 }
517 }
518 void rgblight_effect_snake(uint8_t interval) {
519 static uint8_t pos = 0;
520 static uint16_t last_timer = 0;
521 uint8_t i, j;
522 int8_t k;
523 int8_t increment = 1;
524 if (interval % 2) {
525 increment = -1;
526 }
527 if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_SNAKE_INTERVALS[interval / 2])) {
528 return;
529 }
530 last_timer = timer_read();
531 for (i = 0; i < RGBLED_NUM; i++) {
532 led[i].r = 0;
533 led[i].g = 0;
534 led[i].b = 0;
535 for (j = 0; j < RGBLIGHT_EFFECT_SNAKE_LENGTH; j++) {
536 k = pos + j * increment;
537 if (k < 0) {
538 k = k + RGBLED_NUM;
539 }
540 if (i == k) {
541 sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]);
542 }
543 }
544 }
545 rgblight_set();
546 if (increment == 1) {
547 if (pos - 1 < 0) {
548 pos = RGBLED_NUM - 1;
549 } else {
550 pos -= 1;
551 }
552 } else {
553 pos = (pos + 1) % RGBLED_NUM;
554 }
555 }
556 void rgblight_effect_knight(uint8_t interval) {
557 static uint16_t last_timer = 0;
558 if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) {
559 return;
560 }
561 last_timer = timer_read();
562
563 static int8_t low_bound = 0;
564 static int8_t high_bound = RGBLIGHT_EFFECT_KNIGHT_LENGTH - 1;
565 static int8_t increment = 1;
566 uint8_t i, cur;
567
568 // Set all the LEDs to 0
569 for (i = 0; i < RGBLED_NUM; i++) {
570 led[i].r = 0;
571 led[i].g = 0;
572 led[i].b = 0;
573 }
574 // Determine which LEDs should be lit up
575 for (i = 0; i < RGBLIGHT_EFFECT_KNIGHT_LED_NUM; i++) {
576 cur = (i + RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM;
577
578 if (i >= low_bound && i <= high_bound) {
579 sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[cur]);
580 } else {
581 led[cur].r = 0;
582 led[cur].g = 0;
583 led[cur].b = 0;
584 }
585 }
586 rgblight_set();
587
588 // Move from low_bound to high_bound changing the direction we increment each
589 // time a boundary is hit.
590 low_bound += increment;
591 high_bound += increment;
592
593 if (high_bound <= 0 || low_bound >= RGBLIGHT_EFFECT_KNIGHT_LED_NUM - 1) {
594 increment = -increment;
595 }
596 }
597
598
599 void rgblight_effect_christmas(void) {
600 static uint16_t current_offset = 0;
601 static uint16_t last_timer = 0;
602 uint16_t hue;
603 uint8_t i;
604 if (timer_elapsed(last_timer) < RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL) {
605 return;
606 }
607 last_timer = timer_read();
608 current_offset = (current_offset + 1) % 2;
609 for (i = 0; i < RGBLED_NUM; i++) {
610 hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + current_offset) % 2) * 120;
611 sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]);
612 }
613 rgblight_set();
614 }
615
616 #endif