keyboards/teensy_lc_onekey/Makefile

   1 # project specific files
   2 SRC =   matrix.c \
   3             led.c
   4
   5 ## chip/board settings
   6 # - the next two should match the directories in
   7 #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
   8 # - For Teensies, FAMILY = KINETIS and SERIES is either
   9 #   KL2x (LC) or K20x (3.0,3.1,3.2).
  10 MCU_FAMILY = KINETIS
  11 MCU_SERIES = KL2x
  12
  13 # Linker script to use
  14 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
  15 #   or <this_dir>/ld/
  16 # - NOTE: a custom ld script is needed for EEPROM on Teensy LC
  17 # - LDSCRIPT =
  18 #   - MKL26Z64 for Teensy LC
  19 #   - MK20DX128 for Teensy 3.0
  20 #   - MK20DX256 for Teensy 3.1 and 3.2
  21 MCU_LDSCRIPT = MKL26Z64
  22
  23 # Startup code to use
  24 #  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
  25 # - STARTUP =
  26 #   - kl2x for Teensy LC
  27 #   - k20x5 for Teensy 3.0
  28 #   - k20x7 for Teensy 3.1 and 3.2
  29 MCU_STARTUP = kl2x
  30
  31 # Board: it should exist either in <chibios>/os/hal/boards/
  32 #  or <this_dir>/boards
  33 # - BOARD =
  34 #   - PJRC_TEENSY_LC for Teensy LC
  35 #   - PJRC_TEENSY_3 for Teensy 3.0
  36 #   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
  37 BOARD = PJRC_TEENSY_LC
  38
  39 # Cortex version
  40 # Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
  41 MCU  = cortex-m0plus
  42
  43 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
  44 # I.e. 6 for Teensy LC; 7 for Teensy 3.x
  45 ARMV = 6
  46
  47 # Build Options
  48 #   comment out to disable the options.
  49 #
  50 BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
  51 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
  52 MOUSEKEY_ENABLE ?= yes  # Mouse keys
  53 EXTRAKEY_ENABLE ?= yes  # Audio control and System control
  54 CONSOLE_ENABLE ?= yes   # Console for debug
  55 COMMAND_ENABLE ?= yes    # Commands for debug and configuration
  56 SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
  57 NKRO_ENABLE ?= yes          # USB Nkey Rollover
  58 CUSTOM_MATRIX ?= yes # Custom matrix file
  59
  60 ifndef QUANTUM_DIR
  61         include ../../Makefile
  62 endif