keyboards/matrix/noah/rules.mk

   1 ## chip/board settings
   2 # - the next two should match the directories in
   3 #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
   4 MCU_FAMILY = STM32
   5 MCU_SERIES = STM32F4xx
   6
   7 # Linker script to use
   8 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
   9 #   or <this_dir>/ld/
  10 MCU_LDSCRIPT = noah_boot
  11
  12 # Startup code to use
  13 #  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
  14 MCU_STARTUP = stm32f4xx
  15
  16 # Board: it should exist either in <chibios>/os/hal/boards/
  17 #  or <this_dir>/boards
  18 BOARD = noah_bd
  19
  20 # Cortex version
  21 MCU  = cortex-m4
  22
  23 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
  24 ARMV = 7
  25
  26 USE_FPU = yes
  27
  28 # Vector table for application
  29 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
  30 OPT_DEFS =
  31
  32 # Options to pass to dfu-util when flashing
  33 #DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
  34 #DFU_SUFFIX_ARGS = -p DF11 -v 0483
  35
  36 # Build Options
  37 #   comment out to disable the options.
  38 #
  39 BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
  40 MOUSEKEY_ENABLE = no        # Mouse keys
  41 EXTRAKEY_ENABLE = yes       # Audio control and System control
  42 CONSOLE_ENABLE = no         # Console for debug
  43 COMMAND_ENABLE = no         # Commands for debug and configuration
  44 NKRO_ENABLE = no            # USB Nkey Rollover
  45 NO_USB_STARTUP_CHECK = yes   # Disable initialization only when usb is plugged in
  46
  47 CUSTOM_MATRIX = yes
  48 RGB_MATRIX_ENABLE = yes
  49
  50 RGBLIGHT_ENABLE = yes
  51 RGBLIGHT_CUSTOM_DRIVER = yes
  52
  53 # project specific files
  54 SRC += \
  55     matrix.c \
  56     ws2812.c