keyboards/at_at/660m/halconf.h

   1 /*
   2     ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
   3
   4     Licensed under the Apache License, Version 2.0 (the "License");
   5     you may not use this file except in compliance with the License.
   6     You may obtain a copy of the License at
   7
   8         http://www.apache.org/licenses/LICENSE-2.0
   9
  10     Unless required by applicable law or agreed to in writing, software
  11     distributed under the License is distributed on an "AS IS" BASIS,
  12     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13     See the License for the specific language governing permissions and
  14     limitations under the License.
  15 */
  16
  17 /**
  18  * @file    templates/halconf.h
  19  * @brief   HAL configuration header.
  20  * @details HAL configuration file, this file allows to enable or disable the
  21  *          various device drivers from your application. You may also use
  22  *          this file in order to override the device drivers default settings.
  23  *
  24  * @addtogroup HAL_CONF
  25  * @{
  26  */
  27
  28 #ifndef HALCONF_H
  29 #define HALCONF_H
  30
  31 #define _CHIBIOS_HAL_CONF_
  32 #define _CHIBIOS_HAL_CONF_VER_7_0_
  33
  34 #include "mcuconf.h"
  35
  36 /**
  37  * @brief   Enables the PAL subsystem.
  38  */
  39 #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
  40 #define HAL_USE_PAL                         TRUE
  41 #endif
  42
  43 /**
  44  * @brief   Enables the ADC subsystem.
  45  */
  46 #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
  47 #define HAL_USE_ADC                         FALSE
  48 #endif
  49
  50 /**
  51  * @brief   Enables the CAN subsystem.
  52  */
  53 #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
  54 #define HAL_USE_CAN                         FALSE
  55 #endif
  56
  57 /**
  58  * @brief   Enables the cryptographic subsystem.
  59  */
  60 #if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
  61 #define HAL_USE_CRY                         FALSE
  62 #endif
  63
  64 /**
  65  * @brief   Enables the DAC subsystem.
  66  */
  67 #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
  68 #define HAL_USE_DAC                         FALSE
  69 #endif
  70
  71 /**
  72  * @brief   Enables the GPT subsystem.
  73  */
  74 #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
  75 #define HAL_USE_GPT                         FALSE
  76 #endif
  77
  78 /**
  79  * @brief   Enables the I2C subsystem.
  80  */
  81 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
  82 #define HAL_USE_I2C                         TRUE
  83 #endif
  84
  85 /**
  86  * @brief   Enables the I2S subsystem.
  87  */
  88 #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
  89 #define HAL_USE_I2S                         FALSE
  90 #endif
  91
  92 /**
  93  * @brief   Enables the ICU subsystem.
  94  */
  95 #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
  96 #define HAL_USE_ICU                         FALSE
  97 #endif
  98
  99 /**
 100  * @brief   Enables the MAC subsystem.
 101  */
 102 #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
 103 #define HAL_USE_MAC                         FALSE
 104 #endif
 105
 106 /**
 107  * @brief   Enables the MMC_SPI subsystem.
 108  */
 109 #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
 110 #define HAL_USE_MMC_SPI                     FALSE
 111 #endif
 112
 113 /**
 114  * @brief   Enables the PWM subsystem.
 115  */
 116 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
 117 #define HAL_USE_PWM                         TRUE
 118 #endif
 119
 120 /**
 121  * @brief   Enables the RTC subsystem.
 122  */
 123 #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
 124 #define HAL_USE_RTC                         FALSE
 125 #endif
 126
 127 /**
 128  * @brief   Enables the SDC subsystem.
 129  */
 130 #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
 131 #define HAL_USE_SDC                         FALSE
 132 #endif
 133
 134 /**
 135  * @brief   Enables the SERIAL subsystem.
 136  */
 137 #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
 138 #define HAL_USE_SERIAL                      FALSE
 139 #endif
 140
 141 /**
 142  * @brief   Enables the SERIAL over USB subsystem.
 143  */
 144 #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
 145 #define HAL_USE_SERIAL_USB                  FALSE
 146 #endif
 147
 148 /**
 149  * @brief   Enables the SIO subsystem.
 150  */
 151 #if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
 152 #define HAL_USE_SIO                         FALSE
 153 #endif
 154
 155 /**
 156  * @brief   Enables the SPI subsystem.
 157  */
 158 #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
 159 #define HAL_USE_SPI                         TRUE
 160 #endif
 161
 162 /**
 163  * @brief   Enables the TRNG subsystem.
 164  */
 165 #if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
 166 #define HAL_USE_TRNG                        FALSE
 167 #endif
 168
 169 /**
 170  * @brief   Enables the UART subsystem.
 171  */
 172 #if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
 173 #define HAL_USE_UART                        FALSE
 174 #endif
 175
 176 /**
 177  * @brief   Enables the USB subsystem.
 178  */
 179 #if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
 180 #define HAL_USE_USB                         TRUE
 181 #endif
 182
 183 /**
 184  * @brief   Enables the WDG subsystem.
 185  */
 186 #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
 187 #define HAL_USE_WDG                         FALSE
 188 #endif
 189
 190 /**
 191  * @brief   Enables the WSPI subsystem.
 192  */
 193 #if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
 194 #define HAL_USE_WSPI                        FALSE
 195 #endif
 196
 197 /*===========================================================================*/
 198 /* PAL driver related settings.                                              */
 199 /*===========================================================================*/
 200
 201 /**
 202  * @brief   Enables synchronous APIs.
 203  * @note    Disabling this option saves both code and data space.
 204  */
 205 #if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
 206 #define PAL_USE_CALLBACKS                   FALSE
 207 #endif
 208
 209 /**
 210  * @brief   Enables synchronous APIs.
 211  * @note    Disabling this option saves both code and data space.
 212  */
 213 #if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
 214 #define PAL_USE_WAIT                        FALSE
 215 #endif
 216
 217 /*===========================================================================*/
 218 /* ADC driver related settings.                                              */
 219 /*===========================================================================*/
 220
 221 /**
 222  * @brief   Enables synchronous APIs.
 223  * @note    Disabling this option saves both code and data space.
 224  */
 225 #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
 226 #define ADC_USE_WAIT                        TRUE
 227 #endif
 228
 229 /**
 230  * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
 231  * @note    Disabling this option saves both code and data space.
 232  */
 233 #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 234 #define ADC_USE_MUTUAL_EXCLUSION            TRUE
 235 #endif
 236
 237 /*===========================================================================*/
 238 /* CAN driver related settings.                                              */
 239 /*===========================================================================*/
 240
 241 /**
 242  * @brief   Sleep mode related APIs inclusion switch.
 243  */
 244 #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
 245 #define CAN_USE_SLEEP_MODE                  TRUE
 246 #endif
 247
 248 /**
 249  * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
 250  */
 251 #if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
 252 #define CAN_ENFORCE_USE_CALLBACKS           FALSE
 253 #endif
 254
 255 /*===========================================================================*/
 256 /* CRY driver related settings.                                              */
 257 /*===========================================================================*/
 258
 259 /**
 260  * @brief   Enables the SW fall-back of the cryptographic driver.
 261  * @details When enabled, this option, activates a fall-back software
 262  *          implementation for algorithms not supported by the underlying
 263  *          hardware.
 264  * @note    Fall-back implementations may not be present for all algorithms.
 265  */
 266 #if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
 267 #define HAL_CRY_USE_FALLBACK                FALSE
 268 #endif
 269
 270 /**
 271  * @brief   Makes the driver forcibly use the fall-back implementations.
 272  */
 273 #if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
 274 #define HAL_CRY_ENFORCE_FALLBACK            FALSE
 275 #endif
 276
 277 /*===========================================================================*/
 278 /* DAC driver related settings.                                              */
 279 /*===========================================================================*/
 280
 281 /**
 282  * @brief   Enables synchronous APIs.
 283  * @note    Disabling this option saves both code and data space.
 284  */
 285 #if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
 286 #define DAC_USE_WAIT                        TRUE
 287 #endif
 288
 289 /**
 290  * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
 291  * @note    Disabling this option saves both code and data space.
 292  */
 293 #if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 294 #define DAC_USE_MUTUAL_EXCLUSION            TRUE
 295 #endif
 296
 297 /*===========================================================================*/
 298 /* I2C driver related settings.                                              */
 299 /*===========================================================================*/
 300
 301 /**
 302  * @brief   Enables the mutual exclusion APIs on the I2C bus.
 303  */
 304 #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 305 #define I2C_USE_MUTUAL_EXCLUSION            TRUE
 306 #endif
 307
 308 /*===========================================================================*/
 309 /* MAC driver related settings.                                              */
 310 /*===========================================================================*/
 311
 312 /**
 313  * @brief   Enables the zero-copy API.
 314  */
 315 #if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
 316 #define MAC_USE_ZERO_COPY                   FALSE
 317 #endif
 318
 319 /**
 320  * @brief   Enables an event sources for incoming packets.
 321  */
 322 #if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
 323 #define MAC_USE_EVENTS                      TRUE
 324 #endif
 325
 326 /*===========================================================================*/
 327 /* MMC_SPI driver related settings.                                          */
 328 /*===========================================================================*/
 329
 330 /**
 331  * @brief   Delays insertions.
 332  * @details If enabled this options inserts delays into the MMC waiting
 333  *          routines releasing some extra CPU time for the threads with
 334  *          lower priority, this may slow down the driver a bit however.
 335  *          This option is recommended also if the SPI driver does not
 336  *          use a DMA channel and heavily loads the CPU.
 337  */
 338 #if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
 339 #define MMC_NICE_WAITING                    TRUE
 340 #endif
 341
 342 /*===========================================================================*/
 343 /* SDC driver related settings.                                              */
 344 /*===========================================================================*/
 345
 346 /**
 347  * @brief   Number of initialization attempts before rejecting the card.
 348  * @note    Attempts are performed at 10mS intervals.
 349  */
 350 #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
 351 #define SDC_INIT_RETRY                      100
 352 #endif
 353
 354 /**
 355  * @brief   Include support for MMC cards.
 356  * @note    MMC support is not yet implemented so this option must be kept
 357  *          at @p FALSE.
 358  */
 359 #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
 360 #define SDC_MMC_SUPPORT                     FALSE
 361 #endif
 362
 363 /**
 364  * @brief   Delays insertions.
 365  * @details If enabled this options inserts delays into the MMC waiting
 366  *          routines releasing some extra CPU time for the threads with
 367  *          lower priority, this may slow down the driver a bit however.
 368  */
 369 #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
 370 #define SDC_NICE_WAITING                    TRUE
 371 #endif
 372
 373 /**
 374  * @brief   OCR initialization constant for V20 cards.
 375  */
 376 #if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
 377 #define SDC_INIT_OCR_V20                    0x50FF8000U
 378 #endif
 379
 380 /**
 381  * @brief   OCR initialization constant for non-V20 cards.
 382  */
 383 #if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
 384 #define SDC_INIT_OCR                        0x80100000U
 385 #endif
 386
 387 /*===========================================================================*/
 388 /* SERIAL driver related settings.                                           */
 389 /*===========================================================================*/
 390
 391 /**
 392  * @brief   Default bit rate.
 393  * @details Configuration parameter, this is the baud rate selected for the
 394  *          default configuration.
 395  */
 396 #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
 397 #define SERIAL_DEFAULT_BITRATE              38400
 398 #endif
 399
 400 /**
 401  * @brief   Serial buffers size.
 402  * @details Configuration parameter, you can change the depth of the queue
 403  *          buffers depending on the requirements of your application.
 404  * @note    The default is 16 bytes for both the transmission and receive
 405  *          buffers.
 406  */
 407 #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
 408 #define SERIAL_BUFFERS_SIZE                 16
 409 #endif
 410
 411 /*===========================================================================*/
 412 /* SERIAL_USB driver related setting.                                        */
 413 /*===========================================================================*/
 414
 415 /**
 416  * @brief   Serial over USB buffers size.
 417  * @details Configuration parameter, the buffer size must be a multiple of
 418  *          the USB data endpoint maximum packet size.
 419  * @note    The default is 256 bytes for both the transmission and receive
 420  *          buffers.
 421  */
 422 #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
 423 #define SERIAL_USB_BUFFERS_SIZE             1
 424 #endif
 425
 426 /**
 427  * @brief   Serial over USB number of buffers.
 428  * @note    The default is 2 buffers.
 429  */
 430 #if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
 431 #define SERIAL_USB_BUFFERS_NUMBER           2
 432 #endif
 433
 434 /*===========================================================================*/
 435 /* SPI driver related settings.                                              */
 436 /*===========================================================================*/
 437
 438 /**
 439  * @brief   Enables synchronous APIs.
 440  * @note    Disabling this option saves both code and data space.
 441  */
 442 #if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
 443 #define SPI_USE_WAIT                        TRUE
 444 #endif
 445
 446 /**
 447  * @brief   Enables circular transfers APIs.
 448  * @note    Disabling this option saves both code and data space.
 449  */
 450 #if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
 451 #define SPI_USE_CIRCULAR                    FALSE
 452 #endif
 453
 454
 455 /**
 456  * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
 457  * @note    Disabling this option saves both code and data space.
 458  */
 459 #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 460 #define SPI_USE_MUTUAL_EXCLUSION            TRUE
 461 #endif
 462
 463 /**
 464  * @brief   Handling method for SPI CS line.
 465  * @note    Disabling this option saves both code and data space.
 466  */
 467 #if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
 468 #define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
 469 #endif
 470
 471 /*===========================================================================*/
 472 /* UART driver related settings.                                             */
 473 /*===========================================================================*/
 474
 475 /**
 476  * @brief   Enables synchronous APIs.
 477  * @note    Disabling this option saves both code and data space.
 478  */
 479 #if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
 480 #define UART_USE_WAIT                       FALSE
 481 #endif
 482
 483 /**
 484  * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
 485  * @note    Disabling this option saves both code and data space.
 486  */
 487 #if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 488 #define UART_USE_MUTUAL_EXCLUSION           FALSE
 489 #endif
 490
 491 /*===========================================================================*/
 492 /* USB driver related settings.                                              */
 493 /*===========================================================================*/
 494
 495 /**
 496  * @brief   Enables synchronous APIs.
 497  * @note    Disabling this option saves both code and data space.
 498  */
 499 #if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
 500 #define USB_USE_WAIT                        TRUE
 501 #endif
 502
 503 /*===========================================================================*/
 504 /* WSPI driver related settings.                                             */
 505 /*===========================================================================*/
 506
 507 /**
 508  * @brief   Enables synchronous APIs.
 509  * @note    Disabling this option saves both code and data space.
 510  */
 511 #if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
 512 #define WSPI_USE_WAIT                       TRUE
 513 #endif
 514
 515 /**
 516  * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
 517  * @note    Disabling this option saves both code and data space.
 518  */
 519 #if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 520 #define WSPI_USE_MUTUAL_EXCLUSION           TRUE
 521 #endif
 522
 523 #endif /* HALCONF_H */
 524
 525 /** @} */