HCoop / clinton / wilson.git / blame
| Commit | Line | Data |
|---|---|---|
| a9633ea5 MR |
1 | Reprap Wilson default parts list |
| 2 | (text export from wilson-bom.ods - use spreedsheet to generate custom bom) | |
| 3 | ||
| 4 | Item Quantity Length / Note | |
| 5 | ||
| 6 | 2020 Extrusions | |
| 7 | Vertical frame piece (sides) 2 370mm | |
| 8 | Horizontal frame piece (top and bo 2 330mm | |
| 9 | ||
| 10 | M8 Smooth Rods | |
| 11 | X-Axis 2 380mm | |
| 12 | Y-Axis 2 380mm | |
| 13 | Z-Axis 2 325mm | |
| 14 | ||
| 15 | Threaded Rods | |
| 16 | M5 threaded rod for Z axis 2 300mm | |
| 17 | M10 threaded rod for Y axis 2 405mm | |
| 18 | ||
| 19 | Belts & Pulleys | |
| 20 | Y axis GT2 timing belt (w=6mm) 1 820mm | |
| 21 | X axis GT2 timing belt (w=6mm) 1 930mm | |
| 22 | GT2 pulley 2 | |
| 23 | ||
| 24 | Nuts & Bolts | |
| 25 | M10 nuts and washers 12 | |
| 26 | M5 x 8mm machine screw 36 | |
| 27 | M5 hex nut 2 | |
| 28 | M5 t slot nut 36 | |
| 29 | M4 x 20mm machine screw 6 | |
| 30 | M4 hex nut 6 | |
| 31 | M3 x 8mm machine screw 1 | |
| 32 | M3 x 10mm machine screw 11 | |
| 33 | M3 x 14mm machine screw 18 | |
| 34 | M3 x 30mm machine screw 7 | |
| 35 | M3 x 60mm machine screw 2 50mm ok if your springs are short enough | |
| 36 | M3 hex nut 20? | |
| 37 | M3 lock nut 7 | |
| 38 | M8 x 20mm smooth rod or grub screw 1 | |
| 39 | ||
| 40 | Printed Parts – Required | |
| 41 | X end idler 1 | |
| 42 | X end motor 1 | |
| 43 | X carriage 1 | |
| 44 | Y end idler 1 | |
| 45 | Y end motor 1 | |
| 46 | Z motor holder, left 1 | |
| 47 | Z motor holder, right 1 | |
| 48 | Z rod holder, left 1 | |
| 49 | Z rod holder, right 1 | |
| 50 | Z rear bracket 2 | |
| 51 | Frame brace 2 | |
| 52 | Idler bearing guide (pair) 2 | |
| 53 | ||
| 54 | Printed Parts – Recommended | |
| 55 | Electronics frame mount 1 | |
| 56 | Filament spool support 1 | |
| 57 | SMART display frame mount 1 | |
| 58 | ||
| 59 | Everything Else | |
| 60 | NEMA17 Stepper motor 5 | |
| 61 | MDF board (6mm thick) 1 230mm by 230m | |
| 62 | MK2 Heat bed 1 | |
| 63 | Glass bed 1 3mm borosilicate | |
| 64 | Controller (Mega/RAMPS, Rambo, etc 1 | |
| 65 | Endstop (limit) switch 3 | |
| 66 | LM8UU Linear bearing 12 | |
| 67 | 608ZZ roller bearing 4 | |
| 68 | 624 roller bearing 2 | |
| 69 | 5mm to 5mm shaft couplers 2 Can also use 3/16" ID vinyl tubing | |
| 70 | 40mm x 40mm x 10mm fan 1 | |
| 71 | 80mm x 80mm fan 1 | |
| 72 | Miniature zip ties 20 | |
| 73 | Extruder idler springs 2 High tension | |
| 74 | Bed leveling springs 4 Lower tension | |
| 75 | Power Supply 1 | |
| 76 |