HCoop / clinton / wilson.git / blame
| Commit | Line | Data |
|---|---|---|
| 6bdc8b4e MR |
1 | -------------------------------------------- |
| 2 | How to Assemble the Reprap Wilson 3D printer | |
| 3 | Written by Martin Rice <mrice411@gmail.com> | |
| 4 | -------------------------------------------- | |
| 5 | ||
| 6 | 1. Identify the components | |
| 7 | ||
| 8 | 2. Assemble the Y axis (part 1) | |
| 9 | ||
| 10 | The following parts are used during this step: | |
| 11 | ||
| 12 | a. The two M10 threaded rods | |
| 13 | b. The Y axis smooth rods | |
| 14 | c. The plastic Y end pieces (2) | |
| 15 | d. The two plastic frame brace supports | |
| 16 | e. 12 M10 nuts and washers | |
| 17 | f. Four linear bearings (LM8UU) | |
| 18 | ||
| 19 | 3. Assemble the Frame (part 1) | |
| 20 | ||
| 21 | The following parts are used during this step: | |
| 22 | ||
| 23 | a. The two side pieces of 2020 aluminum extrusion (the longer ones, generally) | |
| 24 | b. One of the two horizontal pieces of 2020 aluminum extrusion (the shorter ones, generally) | |
| 25 | c. 36 T-slot nuts | |
| 26 | d. 28 M5 x 8mm screws | |
| 27 | e. The plastic Z motor holders (2) | |
| 28 | f. The plastic rear frame brackets (2) | |
| 29 | ||
| 30 | 4. Mount the Y axis to the frame | |
| 31 | ||
| 32 | 5. Assemble the X axis (part 1) | |
| 33 | ||
| 34 | 6. Mounting the X axis to the Z axis | |
| 35 | ||
| 36 | 7. Assemble the Frame (part 2) | |
| 37 | ||
| 38 | ||
| 39 | ||
| 40 | ||
| 41 |