HCoop / clinton / prusa3.git / shortlog
? search:
summary | shortlog | log | commit | commitdiff | tree
first ⋅ prev ⋅ next
clinton/prusa3.git
2012-09-01 Kaz WalkerAdd MXL belt option to configuration. commit | commitdiff | tree | snapshot (tar.gz zip)
2012-08-31 Václav 'Ax... Rename belt_tooth_stride to belt_tooth_ratio commit | commitdiff | tree | snapshot (tar.gz zip)
2012-08-08 Václav 'Ax... Filleted and slightly enlarged y idlermount commit | commitdiff | tree | snapshot (tar.gz zip)
2012-08-08 Joachim Glauchemade Y idler configurable by bearing size, also made... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-25 Nathan ZadoksUpdated belt clamp, it was too large. commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-23 Nathan ZadoksX carriage adjustable belt clamp \o/ commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-23 Joachim Glauchemade outside wall a 1mm thicker for more stability commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-23 Joachim Glaucheincreased pushfit rod size (came out way too small... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-21 Joachim Glaucheset default for nema 17 motor to 24 to get correctly... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-13 Nathan ZadoksImproved Y bottom plate mount code a bit. commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-11 vlnofkaMore space for extruder motor. commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-08 vlnofkaNow motor should not collide with Z plate. commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-07 Joachim Glauchemake hole for Z rod bigger to actually fit through commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-07 Joachim GlaucheMerge branch 'master' of github.com:josefprusa/Prusa3 commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-07 Nathan Zadoksfixed up Z axis nut trap direction and dimensions commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-06 Joachim Glauchemore space for belts origin/belt-holder-fix commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-06 Joachim Glauchemore space for belts to slip in commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-04 Joachim Glauchemade a y to bottom plate mounting part commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-03 Joachim Glauchefix charset commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-03 Joachim Glauchemade linear bearing channels 5mm shorter to end at... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-02 Václav 'Ax... Merge branch 'master' of github.com:josefprusa/Prusa3 commit | commitdiff | tree | snapshot (tar.gz zip)
2012-07-02 Václav 'Ax... z-axis can be mounted by 2 crews from front or one... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-30 Toni Frostcomplete-printer - need updates to the config dist commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-30 Toni Frostcomplete-printer - fix y axis and nuts commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-30 Toni Frostmore complete printer updates commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-30 Toni Frostupdates for the assembled printer commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-30 Toni Frosttypos in includes commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-28 Václav 'Ax... Some more configurable dimensions commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-26 vlnofkaModified Greg's Wade extruder commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-26 Václav 'Ax... Fixed typo in filename commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-26 Václav 'Ax... Hotswap carriage commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-25 Václav 'Ax... parametric x axis distance creeps in commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-25 Václav 'Ax... fix hardcoded 16 in fillet commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-20 Joachim Glaucheremove the second hole, make parts smaller commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-20 Joachim Glauchemade the z mounts parametric according to board size commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-19 Václav 'Ax... x-ends: make far wall thicker a bit commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-19 Václav 'Ax... Add readme to output dir commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-19 Václav 'Ax... Merge branch 'fillet' commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-18 Kliment YanevFinished y axis instructions commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-16 Kliment YanevMerge branch 'fillet' of github.com:josefprusa/Prusa3... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-16 Kliment YanevFix shadow motor orientation in y motor holder, wrote... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-15 John Yangfolding clamp holder for mounting Y frame to single... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-14 Kliment YanevMerge branch 'fillet' of github.com:josefprusa/Prusa3... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-14 Kliment YanevMove manual to doc folder commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-14 Václav 'Ax... more doc moving commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-14 Kliment YanevMove doc files to doc directory commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-14 Kliment YanevInitial manual sketch, frame assembly images and source... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-13 Václav 'Ax... Fix z-axis thickness scaling, make it thicker by default commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-13 Václav 'Ax... dump the damn nuttraps commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-13 Václav 'Ax... idler fix commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-12 Václav 'Ax... Thinner bearing-guide walls commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-12 Václav 'Ax... Merge branch 'fillet' of github.com:josefprusa/Prusa3... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-12 Václav 'Ax... Give motor some breathing space commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-12 Václav 'Ax... two screw hole commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-11 vlnofkaBetter NEMA17 dummy (with flange and shaft) commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-11 Václav 'Ax... linear bearings dont need springy housing commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-11 Václav 'Ax... Even smaller floating bearing, lifted ends for firmer... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-11 Václav 'Ax... Merge branch 'fillet' of github.com:josefprusa/Prusa3... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-10 Václav 'Ax... reduce springiness, clean-up commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-09 Václav 'Ax... Make floating bearing less springy and smaller commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 vlnofkaFixed syntax error commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 John Yangdecreased padding width of lm8uu bearing to have tighte... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 John Yangadjusted idler hole to closer match beaing radius,... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 Nathan Zadoksmake output dir automatically commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 Václav 'Ax... Address #3 commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 John Yangadded in the bearing_type variable with the default... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 John Yangmake idler mount hole use config size for idler instead... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-07 John Yanglme8uu and lm8uu dimensions inverted fo bearing calcula... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-06 Václav 'Ax... bearing fixes... hopefully it has all correct dimension... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-06 Václav 'Ax... Add credit to fillet() author commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-06 Václav 'Ax... linear bearing has minimum size now, fixed fillet. commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-05 Václav 'Ax... now we have Makefile, ho ho ho! commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-05 Václav 'Ax... Fix bearing sizes commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-04 Václav 'Ax... heptagonal nema17 holes, yay! commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-04 Václav 'Ax... Shorter screw for x-end stepper commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-04 Václav 'Ax... ignore .gcode files too commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-04 Václav 'Ax... give nema17 screw longer head shaft commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-04 Václav 'Ax... Header change, minor fiddling with bushings, x-carriage... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-03 Václav 'Ax... size clenaup too commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-03 Václav 'Ax... cleanup: remove size argument name from cubes commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-03 Václav 'Ax... tree-point mount of x motor commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-03 Václav 'Ax... purge redundant <inc/functions.scad> commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-03 Václav 'Ax... nushing.scad rework. Y and Z axis change as in configur... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-02 Václav 'Ax... LARGE reformat (tabs to 4 spaces everywhere, cleaning... commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... Bushing.scad rewrite, part 1 commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... More eyecandy commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... Extract printer preview, add colors commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... Added desired layer width and WoT to README commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... Y motor holder has proper shadow stepper now commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... rename nema->nema17, put shadow bearing on idlerholder commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... more parametric idler stuff commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... Changed idler to bearing-guide from i2, parametrised commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... Start of README commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... LARGE scale cleanup commit | commitdiff | tree | snapshot (tar.gz zip)
2012-06-01 Václav 'Ax... Fix for missing holes in older openscads commit | commitdiff | tree | snapshot (tar.gz zip)
2012-05-31 Václav 'Ax... open top Y corners commit | commitdiff | tree | snapshot (tar.gz zip)
2012-05-30 Václav 'Ax... round bottom commit | commitdiff | tree | snapshot (tar.gz zip)
2012-05-30 Václav 'Ax... stepper on bridges commit | commitdiff | tree | snapshot (tar.gz zip)
2012-05-30 Václav 'Ax... I really think that module idler was of no use. commit | commitdiff | tree | snapshot (tar.gz zip)
2012-05-30 Václav 'Ax... fix last commit commit | commitdiff | tree | snapshot (tar.gz zip)
next
Unnamed repository; edit this file 'description' to name the repository.