carriage_l_base = 50;
// Fillets ********************************************************************
+// fillets are rounded corners of boxes. The right engineering term is probably radius
+// but cad software calls it fillet.
// mostly cosmetic, except z axis.
// 0 = no fillets
// 1 = fillet
+// 2 = chamfer (cut the edges at 45deg. angle)
+// Please do put only parts with fillets on sale, other options are not really tested
use_fillets = 1;
-//set to 0 for single plate (affects z axis)
+//set to 0 for single plate (affects z axis and screws that attach RP parts to frame)
i_am_box = 1;
//if you do your own plate and can move bottom Z screws 5mm up set this to 0 to