Commit | Line | Data |
---|---|---|
bf8e4f5b | 1 | # This is Prusa iteration 3 |
4ef881c1 VAH |
2 | Published under GPL v3 |
3 | ||
bf8e4f5b VAH |
4 | ## To start: |
5 | Copy configuration.scad.dist to configuration.scad and fill custom settings section there | |
4ef881c1 VAH |
6 | |
7 | Print calibarion part form extras and check that: | |
8 | * your bearings fit tightly in the holder | |
9 | * Z smooth rod sits firmly inside the round hole, its ok if it needs to be forced there | |
10 | * X smooth rod can be inserted in the half round/half square hole. May need some processing of the flat part if the bridge sags. Your X ends may break if you need hammer here. | |
11 | * Hexagonal nut trap can hold M3 nut | |
12 | * Screw that you will be using to attach parts to frame can be inserted to hole near the nut trap | |
13 | * Your belt can be inserted in the slot and sits there __firmly__. | |
14 | ||
15 | RP every .scad in this directory once | |
bf8e4f5b VAH |
16 | Aim for 0.3mm layers and 2.2 extrusion width (width over thickness), for 0.66mm stroke width. Printer is tested at this setting. |
17 | If you print bushing.stl/y-carriage.stl in PLA it may deform due to heatbed being close, and printed groovemount is in danger too. | |
4ef881c1 | 18 | |
bf8e4f5b | 19 | Using doc/complete-printer-plus.scad as a visual clue and doc/manual.txt as a guide, build the printer. |