[clinton/prusa3.git] / single_plate / README

This is Prusa iteration 3
Published under GPL v3

To start:
Copy configuration.scad.dist to configuration.scad and fill custom
settings section there


RP every .scad in this directory (except complete-printer) once.
Aim for 0.3mm layers and 2.2 extrusion width (width over thickness),
for 0.66mm stroke width. Printer is tested at this setting.

Using doc/complete-printer.scad as a visual clue and doc/manual.txt as a
guide, build the printer.
Commit	Line	Data
8dedb756 VAH	1	This is Prusa iteration 3
	2	Published under GPL v3
	3
	4	To start:
8a211b82 VAH	5	Copy configuration.scad.dist to configuration.scad and fill custom
8a211b82 VAH	6	settings section there
8dedb756 VAH	7
8dedb756 VAH	8
8a211b82 VAH	9	RP every .scad in this directory (except complete-printer) once.
	10	Aim for 0.3mm layers and 2.2 extrusion width (width over thickness),
	11	for 0.66mm stroke width. Printer is tested at this setting.
8dedb756	12
f7aa2311 VAH	13	Using doc/complete-printer.scad as a visual clue and doc/manual.txt as a
f7aa2311 VAH	14	guide, build the printer.