2 # Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
3 # Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
4 # This code is hereby licensed for public consumption under either the
5 # GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
7 # You should have received a copy of the GNU General Public License along
8 # with this program; if not, write to the Free Software Foundation, Inc.,
9 # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
11 # Copyright for this work is to expire January 1, 2010, after which it
12 # shall be public domain.
16 VERSION
='2.3.99-$Revision$'
20 echo "This is abcde v$VERSION."
21 echo "Usage: abcde [options] [tracks]"
23 echo "-1 Encode the whole CD in a single file"
24 echo "-a <action1[,action2]...>"
25 echo " Actions to perform:"
26 echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
27 #echo "-A Experimental actions (retag, transcode)"
28 echo "-b Enable batch normalization"
29 #echo "-B Disable batch replaygain (do file by file)"
31 echo " Specify a configuration file (overrides system and user config files)"
33 echo " Specify discid to resume from (only needed if you no longer have the cd)"
35 echo " Specify CDROM device to grab (flac uses a single-track flac file)"
36 echo "-D Debugging mode (equivalent to sh -x abcde)"
37 echo "-e Erase encoded track information from status file"
38 echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
39 echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
40 echo "-h This help information"
41 #echo "-i Tag files while encoding, when possible (local only) -NWY-"
42 echo "-j <#> Number of encoder processes to run at once (localhost)"
43 echo "-k Keep the wav tracks for later use"
44 echo "-l Use low disk space algorithm"
45 echo "-L Use local CDDB storage directory"
46 echo "-n No lookup. Don't query CDDB, just create and use template"
47 echo "-N Noninteractive. Never prompt for anything"
48 echo "-m Modify playlist to include CRLF endings, to comply with some players"
49 echo " WARNING: Deprecated. Use \"cue\" action"
50 #echo "-M Create a CUE file"
51 echo "-o <type1[,type2]...>"
52 echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
53 echo "-p Pad track numbers with 0's (if less than 10 tracks)"
54 echo "-P Use UNIX pipes to read+encode without wav files"
56 echo " Set quality level (high,medium,low)"
57 echo "-r <host1[,host2]...>"
58 echo " Also encode on these remote hosts"
59 echo "-R Use local CDDB in recursive mode"
61 echo " Show dielfs from the CDDB info (year,genre)"
62 echo "-S <#> Set the CD speed"
63 echo "-t <#> Start the track numbering at a given number"
64 echo "-T <#> Same as -t but modifies tag numbering"
65 echo "-U Do NOT use UNICODE (UTF8) tags and comments"
66 echo "-v Show version number and exit"
67 echo "-V Be a bit more verbose about what is happening behind the scenes"
68 echo "-x Eject CD after all tracks are read"
70 echo " Add a comment to the CD tracks"
71 echo "-W <#> Contatenate CDs: -T #01 -w \"CD #\""
72 echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
74 echo "Tracks is a space-delimited list of tracks to grab."
75 echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
77 #echo "Double hyphens are used to concatenate tracks"
82 echo "$@" >> "$ABCDETEMPDIR/status"
85 # log [level] [message]
87 # log outputs the right message in a common format
93 error
) echo "[ERROR] abcde: $@" >&2 ;;
94 warning
) echo "[WARNING] $@" >&2 ;;
95 info
) echo "[INFO] $@" ;;
99 # Funtions to replace the need of seq, which is too distribution dependant.
103 while [ $i -ne `expr $2 + 1` ]
113 if echo $i |
grep "[[:digit:]]" > /dev
/null
2>&1 ; then
114 while [ $i -ne `expr $2 + 1` ]
121 log error
"syntax error while processing track numbers"
126 # Functions to replace the need of awk {print $1} and {print $NF}
129 if [ X
"$1" = "X" ]; then
130 for first
in `cat`; do
141 if [ X
"$1" = "X" ]; then
142 for stdin
in `cat`; do
146 for last
in $@
; do :; done
151 # checkstatus [blurb]
152 # Returns "0" if the blurb was found, returns 1 if it wasn't
153 # Puts the blurb content, if available, on stdout.
154 # Otherwise, returns "".
157 # Take the last line in the status file if there's multiple matches
159 BLURB
=$
(egrep $PATTERN "$ABCDETEMPDIR/status" |
tail -n 1)
161 if [ -z "$BLURB" ]; then
166 # See if there's a = in it
167 if [ "$(echo $BLURB | grep -c =)" != "0" ]; then
168 echo "$(echo $BLURB | cut -f2- -d=)"
174 # checkwarnings [blurb]
175 # Returns "0" if the blurb was found (meaning there was an warning),
176 # returns 1 if it wasn't (yes this is a little backwards).
177 # Does not print the blurb on stdout.
178 # Otherwise, returns "".
181 if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
184 # Take the last line in the status file if there's multiple matches
186 BLURB
="$(egrep $PATTERN "$ABCDETEMPDIR/warnings
" | tail -n 1)"
188 if [ -z "$BLURB" ]; then
189 # negative, we did not have a negative...
192 # affirmative, we had a negative...
197 # checkerrors [blurb]
198 # Returns "0" if the blurb was found (meaning there was an error),
199 # returns 1 if it wasn't (yes this is a little backwards).
200 # Does not print the blurb on stdout.
201 # Otherwise, returns "".
204 if [ -e "$ABCDETEMPDIR/errors" ]; then :; else
207 # Take the last line in the status file if there's multiple matches
209 BLURB
="$(egrep $PATTERN "$ABCDETEMPDIR/errors
" | tail -n 1)"
211 if [ -z "$BLURB" ]; then
212 # negative, we did not have a negative...
215 # affirmative, we had a negative...
221 # Finds the right pager in the system to display a file
225 # Use the debian sensible-pager wrapper to pick the pager
226 # user has requested via their $PAGER environment variable
227 if [ -x "/usr/bin/sensible-pager" ]; then
228 /usr
/bin
/sensible-pager
"$PAGEFILE"
229 elif [ -x "$PAGER" ]; then
230 # That failed, try to load the preferred editor, starting
231 # with their PAGER variable
233 # If that fails, check for less
234 elif [ -x /usr
/bin
/less ]; then
235 /usr
/bin
/less -f "$PAGEFILE"
236 # more should be on all UNIX systems
237 elif [ -x /bin
/more ]; then
238 /bin
/more "$PAGEFILE"
240 # No bananas, just cat the thing
245 # run_command [blurb] [command...]
246 # Runs a command, silently if necessary, and updates the status file
251 # See if this is supposed to be silent
252 if [ "$(checkstatus encode-output)" = "loud" ]; then
256 # Special case for SMP, since
257 # encoder output is never displayed, don't mute echos
258 if [ -z "$BLURB" -a "$MAXPROCS" != "1" ]; then
267 normalize|normalize-audio
)
268 if [ "$RETURN" = "2" ]; then
269 # File was already normalized.
274 if [ "$RETURN" != "0" ]; then
275 # Put an error in the errors file. For various reasons we
276 # can't capture a copy of the program's output but we can
277 # log what we attempted to execute and the error code
278 # returned by the program.
279 if [ "$BLURB" ]; then
282 echo "${TWEAK}returned code $RETURN: $@" >> "$ABCDETEMPDIR/errors"
283 return $RETURN # Do not pass go, do not update the status file
285 if [ "$BLURB" ]; then
286 echo $BLURB >> "$ABCDETEMPDIR/status"
290 # relpath() and slash() are Copyright (c) 1999 Stuart Ballard and
291 # distributed under the terms of the GNU GPL v2 or later, at your option
293 # Function to determine if a word contains a slash.
302 # Function to give the relative path from one file to another.
303 # Usage: relpath fromfile tofile
304 # eg relpath music/Artist/Album.m3u music/Artist/Album/Song.mp3
305 # (the result would be Album/Song.mp3)
306 # Output is relative path to $2 from $1 on stdout
308 # This code has the following restrictions:
309 # Multiple ////s are not collapsed into single /s, with strange effects.
310 # Absolute paths and ../s are handled wrong in FR (but they work in TO)
311 # If FR is a directory it must have a trailing /
319 /*) ;; # No processing is needed for absolute paths
321 # Loop through common prefixes, ignoring them.
322 while slash
"$FR" && [ "$(echo "$FR" | cut -d/ -f1)" = "$(echo "$TO" | cut -d/ -f1)" ]
324 FR
="$(echo "$FR" | cut -d/ -f2-)"
325 TO
="$(echo "$TO" | cut -d/ -f2-)"
327 # Loop through directory portions left in FR, adding appropriate ../s.
330 FR
="$(echo "$FR" | cut -d/ -f2-)"
341 if [ ! "$@" = "" ]; then
342 # Cut off any command-line option we added in
343 X
=$
(echo $@ | cut
-d' ' -f2)
344 if [ "$(which $X)" = "" ]; then
346 elif [ ! -x $
(which $X) ]; then
355 if [ ! "$@" = "" ]; then
356 # Cut off any command-line option we added in
357 X
=$
(echo $@ | cut
-d' ' -f2)
358 # Test for built-in abcde.function
359 [ "$X" != "${X#abcde.}" ] && type $X >/dev
/null
2>&1 && return
360 if [ "$(which $X)" = "" ]; then
361 log error
"$X is not in your path." >&2
362 log info
"Define the full path to the executable if it exists on your system." >&2
363 if [ -e /etc
/debian_release
] ; then
365 oggenc
) MISSING_PACKAGE
=vorbis-tools
;;
366 lame|flac
) MISSING_PACKAGE
=$X ;;
368 log info
"Hint: apt-get install $MISSING_PACKAGE" >&2
371 elif [ ! -x "$(which $X)" ]; then
372 log error
"$X is not executable." >&2
378 # diffentries <filename> <max_value> <entry1>,<entry2>
379 # max_value: the range of entries goes from 1 to <max_value>
384 local CDDBDIFFCHOICES
=$1
386 local CDDBDIFFCHOICE
="$@"
387 if [ ! X
"$DIFF" = "X" ]; then
388 PARSECHOICE1
=$
(echo $CDDBDIFFCHOICE | cut
-d"," -f1 |
xargs printf %d
2>/dev
/null
)
389 PARSECHOICE2
=$
(echo $CDDBDIFFCHOICE | cut
-d"," -f2 |
xargs printf %d
2>/dev
/null
)
390 if [ $PARSECHOICE1 -lt 1 ] ||
[ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
391 [ $PARSECHOICE2 -lt 1 ] ||
[ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
392 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
393 echo "Invalid diff range. Please select two coma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
395 # We parse the 2 choices to diff, store them in temporary files and diff them.
396 for PARSECHOICE
in $
(echo $CDDBDIFFCHOICE |
tr , \
); do
397 do_cddbparse
"$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
399 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
400 $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
401 if [ $
(cat "$ABCDETEMPDIR/$FILENAME.diff" |
wc -l) -ge 24 ]; then
402 page
"$ABCDETEMPDIR/$FILENAME.diff"
404 cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
408 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
413 # Finds an specific field from cddbinfo
418 TRACKNAME
="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
421 TRACKNAME
="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
427 # Get the track number we are going to use for different actions
430 if [ -n "$STARTTRACKNUMBER" ] ; then
431 # Get the trackpadding from the current track
432 CURRENTTRACKPADDING
=$
(echo -n $UTRACKNUM |
wc -c)
433 TRACKNUM
=$
( printf %0.
${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
435 TRACKNUM
=${UTRACKNUM}
441 # Calculate cddb disc ids without requiring specialized helper programs.
442 # largely copied from cd-discid and musicbrainz examples. some of the steps
443 # don't make sense, but they're necessary to match the ids generated by other
446 ## FIXME ## Right now, we get 2 frames more than with cue2discid ??
447 # data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
448 # processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
449 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
450 # data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
451 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
453 # Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
456 if [ X
"$LEADOUT" = "X" ]; then
457 log warning
"Error trying to calculate disc ids without lead-out information."
461 # default to a two second lead-in
463 LEADIN
=${LEADIN:=150}
465 # number of cdframes per second
468 # reset cddb checksum for cddb disc-id calululation
472 for OFFSET
in $
(echo $OFFSETS)
474 COOKEDOFFSETS
="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
476 OFFSETTIME
=$
(( ($OFFSET + $LEADIN) / $CDFRAMES ))
477 while [ $OFFSETTIME -gt 0 ]; do
478 CDDBCKSUM
=$
(($CDDBCKSUM + $OFFSETTIME % 10))
479 OFFSETTIME
=$
(($OFFSETTIME / 10))
484 COOKEDOFFSETS
="${COOKEDOFFSETS:1}" # eat the leading space
486 PREGAP
=$
(($
(echo $OFFSETS | cut
-f1 -d' ')))
487 TOTALTIME
=$
(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
489 printf -v HEXSUM
"%08lx" $
(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
490 TRACKINFO="${HEXSUM} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
495 if checkstatus replaygain; then :; else
496 run_command "" echo "Adding replygain information..."
497 for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
501 OUTPUT=$OGGOUTPUTCONTAINER
504 OUTPUT=$FLACOUTPUTCONTAINER
512 for UTRACKNUM in $TRACKQUEUE
514 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
515 getcddbinfo TRACKNAME
517 TRACKFILE="$(mungefilename "$TRACKNAME")"
518 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
519 ALBUMFILE="$(mungefilename "$DALBUM")"
520 GENRE="$(mungegenre "$GENRE")"
521 YEAR=${CDYEAR:-$CDYEAR}
523 if [ "$ONETRACK" = "y" ]; then
524 if [ "$VARIOUSARTISTS" = "y" ]; then
525 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
527 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
530 if [ "$VARIOUSARTISTS" = "y" ]; then
531 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
533 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
536 OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
537 (( REPLAYINDEX = $REPLAYINDEX + 1 ))
541 run_command replaygain-flac nice $ENCNICE $METAFLAC --add-replay-gain "${OUTPUTFILES[@]}"
544 run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN --album "${OUTPUTFILES[@]}"
547 run_command replaygain-mp3 nice $ENCNICE $MP3GAIN -a "${OUTPUTFILES[@]}"
550 run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
555 if checkerrors "replaygain-.{3,6}"; then :; else
556 run_command replaygain true
561 # This code splits the a Various Artist track name from one of the following
564 # forward: Artist / Track
565 # forward-dash: Artist - Track
566 # reverse: Track / Artist
567 # reverse-dash: Track - Artist
568 # colon: Artist: Track
569 # trailing-paren: Artist (Track)
572 # VARIOUSARTISTS, VARIOUSARTISTSTYLE, TRACKNAME, TRACKARTIST
575 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
576 case "$VARIOUSARTISTSTYLE" in
578 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
579 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
580 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
583 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
584 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
585 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
588 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
589 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
590 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
593 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
594 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
595 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
598 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
599 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
600 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
603 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
604 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
605 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
608 elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
609 TRACKARTIST="Various"
611 TRACKARTIST="$DARTIST"
616 local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
620 "classic rock") id=1 ;;
638 "industrial") id=19 ;;
639 "alternative") id=20 ;;
641 "death metal") id=22 ;;
643 "soundtrack") id=24 ;;
644 "euro-techno") id
=25 ;;
648 "jazz+funk") id
=29 ;;
651 "classical") id
=32 ;;
652 "instrumental") id
=33 ;;
656 "sound clip") id
=37 ;;
659 "alt. rock") id
=40 ;;
664 "meditative") id
=45 ;;
665 "instrum. pop") id
=46 ;;
666 "instrum. rock") id
=47 ;;
670 "techno-indust.") id
=51 ;;
671 "electronic") id
=52 ;;
673 "eurodance") id
=54 ;;
675 "southern rock") id
=56 ;;
680 "christian rap") id
=61 ;;
681 "pop/funk"|
"pop / funk") id
=62 ;;
683 "native american") id
=64 ;;
686 "psychadelic") id
=67 ;;
688 "showtunes") id
=69 ;;
692 "acid punk") id
=73 ;;
693 "acid jazz") id
=74 ;;
697 "rock & roll") id
=78 ;;
698 "hard rock") id
=79 ;;
700 "folk/rock") id
=81 ;;
701 "national folk") id
=82 ;;
708 "bluegrass") id
=89 ;;
709 "avantgarde") id
=90 ;;
710 "gothic rock") id
=91 ;;
711 "progress. rock") id
=92 ;;
712 "psychadel. rock") id
=93 ;;
713 "symphonic rock") id
=94 ;;
714 "slow rock") id
=95 ;;
717 "easy listening") id
=98 ;;
723 "chamber music") id
=104 ;;
725 "symphony") id
=106 ;;
726 "booty bass") id
=107 ;;
728 "porn groove") id
=109 ;;
730 "slow jam") id
=111 ;;
734 "folklore") id
=115 ;;
736 "power ballad") id
=117 ;;
737 "rhythmic soul") id
=118 ;;
738 "freestyle") id
=119 ;;
740 "punk rock") id
=121 ;;
741 "drum solo") id
=122 ;;
742 "a capella") id
=123 ;;
743 "euro-house") id
=124 ;;
744 "dance hall") id
=125 ;;
746 "drum & bass") id
=127 ;;
747 "club-house") id
=128 ;;
748 "hardcore") id
=129 ;;
752 "negerpunk") id
=133 ;;
753 "polsk punk") id
=134 ;;
755 "christian gangsta rap") id
=136 ;;
756 "heavy metal") id
=137 ;;
757 "black metal") id
=138 ;;
758 "crossover") id
=139 ;;
759 "contemporary christian")id
=140 ;;
760 "christian rock") id
=141 ;;
761 "merengue") id
=142 ;;
763 "thrash metal") id
=144 ;;
766 "synthpop") id
=147 ;;
767 "rock/pop"|
"rock / pop") id
=148 ;;
774 # do_tag [tracknumber]
775 # id3 tags a filename
777 # TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC,
778 # COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE (and temporarily) ID3TAGV
781 COMMENTOUTPUT
="$(eval echo ${COMMENT})"
782 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
783 run_command
'' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
784 # If we want to start the tracks with a given number, we need to modify the
785 # TRACKNUM value before evaluation
786 if [ -n "$STARTTRACKNUMBERTAG" ] ; then
789 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
793 # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
794 GENREID
=$
(do_getgenreid
"${CDGENRE}")
799 # FIXME # track numbers in mp3 come with 1/10, so we cannot
800 # happily substitute them with $TRACKNUM
801 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE $TAGGER $TAGGEROPTS \
802 --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
803 -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
804 -G "$GENREID" -n "${TRACKNUM:-$1}" \
805 "${TRACKNUM:+-N $TRACKS}" \
806 "${ENCODING:+--set-encoding=$ENCODING}" \
807 "$ABCDETEMPDIR/track$1.$OUTPUT"
809 # FIXME # Still not activated...
811 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
812 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
813 -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" \
814 -y "$CDYEAR" -g "$GENREID" -k "${TRACKNUM:-$1}" \
815 "$ABCDETEMPDIR/track$1.$OUTPUT"
818 # FIXME # track numbers in mp3 come with 1/10, so we cannot
819 # happily substitute them with $TRACKNUM
820 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
821 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
822 -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" \
823 -y "$CDYEAR" -g "$GENREID" \
824 -T "${TRACKNUM:-$1/$TRACKS}" \
825 "$ABCDETEMPDIR/track$1.$OUTPUT"
830 case "$OGGENCODERSYNTAX" in
832 # vorbiscomment can't do in-place modification, mv the file first
833 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
834 mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
838 # http://www.xiph.org/ogg/vorbis/doc/v-comment.html
840 echo ARTIST
="$TRACKARTIST"
842 echo TITLE
="$TRACKNAME"
843 if [ -n "$CDYEAR" ]; then
846 if [ -n "$CDGENRE" ]; then
847 echo GENRE
="$CDGENRE"
849 echo TRACKNUMBER
=${TRACKNUM:-$1}
850 if [ -n "$DISCNUMBER" ]; then
851 echo DISCNUMBER
="$DISCNUMBER"
853 echo CDDB
=$CDDBDISCID
854 if [ "$(eval echo ${COMMENT})" != "" ]; then
855 case "$COMMENTOUTPUT" in
856 *=*) echo "$COMMENTOUTPUT";;
857 *) echo COMMENT
="$COMMENTOUTPUT";;
860 ) | run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
861 $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
862 "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
863 # Doublecheck that the commented file was created
864 # successfully before wiping the original
865 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
866 rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
868 mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
875 echo ARTIST
="$TRACKARTIST"
877 echo TITLE
="$TRACKNAME"
878 if [ -n "$CDYEAR" ]; then
881 if [ -n "$CDGENRE" ]; then
882 echo GENRE
="$CDGENRE"
884 echo TRACKNUMBER
="${TRACKNUM:-$1}"
885 if [ -n "$DISCNUMBER" ]; then
886 echo DISCNUMBER
="$DISCNUMBER"
888 echo CDDB
="$CDDBDISCID"
889 if [ "$(eval echo ${COMMENT})" != "" ]; then
890 case "$COMMENTOUTPUT" in
891 *=*) echo "$COMMENTOUTPUT";;
892 *) echo COMMENT
="$COMMENTOUTPUT";;
895 ) | run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
898 run_command tagtrack-
$OUTPUT-$1 true
901 run_command tagtrack-
$OUTPUT-$1 true
904 run_command tagtrack-
$OUTPUT-$1 true
907 run_command tagtrack-
$OUTPUT-$1 true
911 if checkerrors
"tagtrack-(.{3,6})-$1"; then :; else
912 run_command tagtrack-
$1 true
919 # OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
922 # The commands here don't go through run_command because they're never
923 # supposed to be silenced
924 echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
925 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
929 case "$MP3ENCODERSYNTAX" in
934 for UTRACKNUM
in $TRACKQUEUE
936 TRACKFILES
="$TRACKFILES track$UTRACKNUM.wav"
938 nice
$ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
940 if [ "$RETURN" != "0" ]; then
941 echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
943 for UTRACKNUM
in $TRACKQUEUE
945 run_command encodetrack-
$OUTPUT-$UTRACKNUM true
946 #run_command encodetrack-$UTRACKNUM true
955 if checkerrors
"nogap-encode"; then :; else
956 if [ ! "$KEEPWAVS" = "y" ] ; then
957 if [ ! "$KEEPWAVS" = "move" ] ; then
962 # Other encoders fall through to normal encoding as the tracks have not
963 # been entered in the status file.
966 # do_encode [tracknumber] [hostname]
967 # If no hostname is specified, encode locally
969 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
972 if [ "$USEPIPES" = "y" ]; then
975 TEMPARG
="PIPE_$MP3ENCODERSYNTAX"
978 TEMPARG
="PIPE_$OGGENCODERSYNTAX"
981 TEMPARG
="PIPE_$FLACENCODERSYNTAX"
984 TEMPARG
="PIPE_$SPEEXENCODER"
987 TEMPARG
="PIPE_$MPPENCODER"
990 TEMPARG
="PIPE_$MPPENCODER"
993 IN
="$( eval echo "\$
$TEMPARG" )"
995 IN
="$ABCDETEMPDIR/track$1.wav"
998 case "$MP3ENCODERSYNTAX" in
999 # FIXME # check if mp3enc needs -if for pipes
1000 # FIXME # I have not been able to find a working mp3enc binary
1014 # We need IN to proceed, if we are not using pipes.
1015 if [ -s "$IN" -o X
"$USEPIPES" = "Xy" ] ; then
1016 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1018 case "$TMPOUTPUT" in
1020 OUTPUT
=$OGGOUTPUTCONTAINER
1023 OUTPUT
=$FLACOUTPUTCONTAINER
1029 OUT
="$ABCDETEMPDIR/track$1.$OUTPUT"
1030 if [ "$NOGAP" = "y" ] && checkstatus encodetrack-
$OUTPUT-$1 ; then
1033 if [ X
"$USEPIPES" = "Xy" ]; then
1035 # We need a way to store the creation of the files when using PIPES
1036 RUN_COMMAND_PIPES
="run_command encodetrack-$OUTPUT-$1 true"
1037 # When pipping it does not make sense to have a higher nice for
1038 # reading than for encoding, since it will be hold by the
1039 # encoding process. Setting an effective nice, to calm down a
1040 # bit the reading process.
1041 EFFECTIVE_NICE
=$READNICE
1043 run_command
'' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
1044 RUN_COMMAND
="run_command encodetrack-$OUTPUT-$1"
1045 EFFECTIVE_NICE
=$ENCNICE
1051 case "$MP3ENCODERSYNTAX" in
1052 lame|toolame|gogo
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
1053 bladeenc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
1054 l3enc|xingmp3enc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
1055 # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
1056 mp3enc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
1060 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev
/null
2>&1
1067 case "$OGGENCODERSYNTAX" in
1068 vorbize
) $RUN_COMMAND nice
$EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
1069 oggenc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
1073 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev
/null
2>&1
1080 case "$FLACENCODERSYNTAX" in
1081 flac
) $RUN_COMMAND nice
$EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
1086 vecho
"$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
1087 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev
/null
2>&1
1092 if [ "$(eval echo ${COMMENT})" != "" ]; then
1095 *) COMMENT
="COMMENT=$COMMENT" ;;
1097 COMMENT
="--comment \"$COMMENT\""
1099 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1100 if [ ! "$DOTAG" = "y" ]; then
1101 $RUN_COMMAND nice
$EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" "$COMMENT" "$IN" "$OUT"
1103 $RUN_COMMAND nice
$EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
1107 # MPP/MP+(Musepack) format (.mpc) is done locally, with inline
1109 # I tried compiling the mppenc from corecodecs.org and got some
1110 # errors, so I have not tried it myself.
1111 ## FIXME ## Needs some cleanup to determine if an empty tag sent
1112 ## FIXME ## to the encoder ends up empty.
1113 $RUN_COMMAND nice
$EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
1116 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1117 if [ ! "$DOTAG" = "y" ]; then
1118 $RUN_COMMAND nice
$EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
1121 $RUN_COMMAND nice
$ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
1125 # In case of wav output we need nothing. Just keep the wavs.
1130 # Only remove .wav if the encoding succeeded
1131 if checkerrors
"encodetrack-(.{3,6})-$1"; then :; else
1132 run_command encodetrack-
$1 true
1133 if [ ! "$KEEPWAVS" = "y" ] ; then
1134 if [ ! "$KEEPWAVS" = "move" ] ; then
1140 run_command
"" echo "HEH! The file we were about to encode disappeared:"
1141 run_command
"" echo ">> $IN"
1142 run_command encodetrack-
$1 false
1146 # do_preprocess [tracknumber]
1148 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1151 # IN="$ABCDETEMPDIR/track$1.wav"
1152 # # We need IN to proceed.
1153 # if [ -s "$IN" ] ; then
1154 # for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1156 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1157 # run_command '' echo "Pre-processing track $1 of $TRACKS..."
1158 # case "$POSTPROCESSFORMAT" in
1160 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $WAV_PRE $IF $OF ;;
1162 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $MP3_PRE $IF $OF ;;
1164 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $OGG_PRE $IF $OF ;;
1166 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $FLAC_PRE $IF $OF ;;
1168 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $SPX_PRE $IF $OF ;;
1171 # # Only remove .wav if the encoding succeeded
1172 # if checkerrors "preprocess-(.{3,4})-$1"; then
1173 # run_command preprocess-$1 false
1175 # run_command preprocess-$1 true
1178 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1179 # echo "HEH! The file we were about to pre-process disappeared:"
1182 # run_command preprocess-$1 false
1187 # do_postprocess [tracknumber]
1189 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1192 # for POSTPROCESSFORMAT in $(echo $POSTPROCESSFORMATS | tr , \ )
1194 # IN="$ABCDETEMPDIR/track$1.$POSTPROCESSFORMAT"
1195 # # We need IN to proceed.
1196 # if [ -s "$IN" ] ; then
1197 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1198 # run_command '' echo "Post-processing track $1 of $TRACKS..."
1199 # case "$POSTPROCESSFORMAT" in
1201 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $MP3_POST $IF $OF ;;
1203 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $OGG_POST $IF $OF ;;
1205 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $FLAC_POST $IF $OF ;;
1207 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
1209 # # Only remove .wav if the encoding succeeded
1210 # if checkerrors "postprocess-(.{3,4})-$1"; then
1211 # run_command postprocess-$1 false
1213 # run_command postprocess-$1 true
1216 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1217 # echo "HEH! The file we were about to post-process disappeared:"
1220 # run_command postprocess-$1 false
1235 # MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
1239 # The commands here don't go through run_command because they're never supposed to be silenced
1240 echo "Batch analizing gain in tracks: $TRACKQUEUE"
1245 for UTRACKNUM
in $TRACKQUEUE
1247 MP3FILES
="$TRACKFILES track$UTRACKNUM.mp3"
1249 # FIXME # Hard-coded batch option!
1250 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1252 if [ "$RETURN" != "0" ]; then
1253 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1255 for UTRACKNUM
in $TRACKQUEUE
1257 echo normalizetrack-
$UTRACKNUM >> status
1263 # do_batch_normalize
1265 # NORMALIZER, NORMALIZEROPTS
1266 do_batch_normalize
()
1268 # The commands here don't go through run_command because they're never supposed to be silenced
1269 echo "Batch normalizing tracks: $TRACKQUEUE"
1274 for UTRACKNUM
in $TRACKQUEUE
1276 TRACKFILES
="$TRACKFILES track$UTRACKNUM.wav"
1278 # XXX: Hard-coded batch option!
1279 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1281 if [ "$RETURN" != "0" ]; then
1282 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1284 for UTRACKNUM
in $TRACKQUEUE
1286 echo normalizetrack-
$UTRACKNUM >> status
1292 # do_normalize [tracknumber]
1294 # TRACKS, TRACKNAME, NORMALIZER, NORMALIZEROPTS
1297 IN
="$ABCDETEMPDIR/track$1.wav"
1298 if [ -e "$IN" ] ; then
1299 run_command
'' echo "Normalizing track $1 of $TRACKS: $TRACKNAME..."
1300 run_command normalizetrack-
$1 $NORMALIZER $NORMALIZEROPTS "$IN"
1302 if [ "$(checkstatus encode-output)" = "loud" ]; then
1303 echo "HEH! The file we were about to normalize disappeared:"
1306 run_command normalizetrack-
$1 false
"File $IN was not found"
1310 # do_move [tracknumber]
1311 # Deduces the outfile from environment variables
1312 # Creates directory if necessary
1314 # TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
1317 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1319 # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
1320 # defined the OUTPUTFILE:
1323 # Create ALBUMFILE, ARTISTFILE, TRACKFILE
1324 # Munge filenames as follows:
1329 # Eat control characters
1330 ALBUMFILE
="$(mungefilename "$DALBUM")"
1331 ARTISTFILE
="$(mungefilename "$TRACKARTIST")"
1332 TRACKFILE
="$(mungefilename "$TRACKNAME")"
1333 GENRE
="$(mungegenre "$GENRE")"
1334 YEAR
=${CDYEAR:-$CDYEAR}
1335 # If we want to start the tracks with a given number, we need to modify
1336 # the TRACKNUM value before evaluation
1338 # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
1339 # ARTISTFILE, TRACKFILE, and TRACKNUM.
1340 if [ "$ONETRACK" = "y" ]; then
1341 if [ "$VARIOUSARTISTS" = "y" ]; then
1342 OUTPUTFILE
="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
1344 OUTPUTFILE
="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
1347 if [ "$VARIOUSARTISTS" = "y" ]; then
1348 OUTPUTFILE
="$(eval echo \""$VAOUTPUTFORMAT"\")"
1350 OUTPUTFILE
="$(eval echo \""$OUTPUTFORMAT"\")"
1353 if checkerrors
"tagtrack-$OUTPUT-$1"; then :; else
1354 # Once we know the specific output was successful, we can change
1355 # the OUTPUT to the value containing the container
1358 OUTPUT
=$OGGOUTPUTCONTAINER
1361 OUTPUT
=$FLACOUTPUTCONTAINER
1367 # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
1368 OUTPUTFILEDIR
="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
1371 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1372 # FIXME # introduce warnings?
1375 # mkdir -p shouldn't return an error if the directory already exists
1376 mkdir
-p "$OUTPUTFILEDIR"
1377 run_command movetrack-
$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1378 if checkstatus movetrack-output-
$OUTPUT; then :; else
1379 run_command movetrack-output-
$OUTPUT true
1384 # mkdir -p shouldn't return an error if the directory already exists
1385 mkdir
-p "$OUTPUTFILEDIR"
1386 run_command movetrack-
$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1387 if checkstatus movetrack-output-
$OUTPUT; then :; else
1388 run_command movetrack-output-
$OUTPUT true
1392 # Lets move the cue file
1393 if CUEFILE
=$
(checkstatus cuefile
) >/dev
/null
; then
1394 if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
1395 if checkstatus movecue-
$OUTPUT; then :; else
1396 # Silence the Copying output since it overlaps with encoding processes...
1397 #run_command '' vecho "Copying cue file to its destination directory..."
1398 if checkstatus onetrack
>/dev
/null
; then
1401 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1402 # We dont have the dir, since it was not created before.
1405 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1408 # NOTE: Creating a cue file with the 3-char-extension files is to comply with
1409 # http://brianvictor.tripod.com/mp3cue.htm#details
1410 [a-z0-9
][a-z0-9
][a-z0-9
])
1411 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1414 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
1418 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
1420 echo movecue-
$OUTPUT >> "$ABCDETEMPDIR/status"
1429 # Create the playlist if wanted
1431 # PLAYLISTFORMAT, PLAYLISTDATAPREFIX, VAPLAYLISTFORMAT, VAPLAYLISTDATAPREFIX,
1432 # VARIOUSARTISTS, OUTPUTDIR
1435 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1439 OUTPUT
=$OGGOUTPUTCONTAINER
1442 OUTPUT
=$FLACOUTPUTCONTAINER
1448 # Create a playlist file for the playlist data to go into.
1449 # We used to wipe it out if it existed. Now we request permision if interactive.
1450 for LASTTRACK
in $TRACKQUEUE; do :; done
1451 ALBUMFILE
="$(mungefilename "$DALBUM")"
1452 ARTISTFILE
="$(mungefilename "$DARTIST")"
1453 GENRE
="$(mungegenre "$GENRE")"
1454 YEAR
=${CDYEAR:-$CDYEAR}
1455 if [ "$VARIOUSARTISTS" = "y" ] ; then
1456 PLAYLISTFILE
="$(eval echo "$VAPLAYLISTFORMAT")"
1458 PLAYLISTFILE
="$(eval echo "$PLAYLISTFORMAT")"
1460 FINALPLAYLISTDIR
="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
1461 mkdir
-p "$FINALPLAYLISTDIR"
1462 if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
1463 echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
1464 if [ "$INTERACTIVE" = "y" ]; then
1465 while [ "$DONE" != "y" ]; do
1467 case $ERASEPLAYLIST in
1468 e|E|a|A|k|K
) DONE
=y
;;
1469 "") ERASEPLAYLIST
=e
; DONE
=y
;;
1477 # Once we erase the playlist, we use append to create the new one.
1478 [ "$ERASEPLAYLIST" = "e" -o "$ERASEPLAYLIST" = "E" ] && rm -f "$OUTPUTDIR/$PLAYLISTFILE" && ERASEPLAYLIST
=a
1480 # The playlist does not exist, so we can safelly use append to create the new list
1483 if [ "$ERASEPLAYLIST" = "a" -o "$ERASEPLAYLIST" = "A" ]; then
1484 touch "$OUTPUTDIR/$PLAYLISTFILE"
1485 for UTRACKNUM
in $TRACKQUEUE
1487 # Shares some code with do_move since the filenames have to match
1488 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
1489 getcddbinfo TRACKNAME
1491 TRACKFILE
="$(mungefilename "$TRACKNAME")"
1492 ARTISTFILE
="$(mungefilename "$TRACKARTIST")"
1493 ALBUMFILE
="$(mungefilename "$DALBUM")"
1494 # If we want to start the tracks with a given number, we need to modify the
1495 # TRACKNUM value before evaluation
1497 if [ "$VARIOUSARTISTS" = "y" ]; then
1498 OUTPUTFILE
="$(eval echo \""$VAOUTPUTFORMAT\"")"
1500 OUTPUTFILE
="$(eval echo \""$OUTPUTFORMAT\"")"
1502 if [ "$VARIOUSARTISTS" = "y" ]; then
1503 if [ "$VAPLAYLISTDATAPREFIX" ] ; then
1504 echo ${VAPLAYLISTDATAPREFIX}$OUTPUTFILE.
$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1506 relpath
"$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1509 if [ "$PLAYLISTDATAPREFIX" ]; then
1510 echo ${PLAYLISTDATAPREFIX}$OUTPUTFILE.
$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1512 relpath
"$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1517 ## this will convert the playlist to have CRLF line-endings, if specified
1518 ## (some hardware players insist on CRLF endings)
1519 if [ "$DOSPLAYLIST" = "y" ]; then
1520 awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
1521 # mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
1522 cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" |
sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
1524 echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
1529 # This function reads a cuefile on stdin and writes an extended
1530 # cddb query on stdout. Any PREGAP for track 1 is properly
1531 # handled, although cue files embedded in FLAC files do not
1532 # appear to properly store the PREGAP setting. :(
1533 abcde.cue2discid
() {
1538 while [ $val -gt 0 ] ; do
1539 ret
=$
(( $ret + ( $val % 10) ))
1540 val
=$
(( $val / 10 ))
1550 local first second third
1551 first
=$
(expr ${1} + 0 )
1552 second
=$
(expr ${2} + 0 )
1553 third
=$
(expr ${3} + 0 )
1555 echo $
(( ((($first * 60) + $second) * 75) + $third ))
1565 while read line
; do
1568 TRACK
) i
=$
(( i
+ 1 ))
1570 INDEX
) if [ "$2" -eq 1 ] ; then
1572 START
=$
(( $LBA + $PREGAP + $OFFSET ))
1574 X
=$
(cddb_sum $
(( $START / 75 )) )
1578 PREGAP
) PREGAP
=$
(msf2lba
$2)
1582 LEADOUT
=$
(( $4 / 588 ))
1585 LEADIN
=$
(( $3 / 588 ))
1594 LEADOUT
=$
(( $LEADOUT + $LEADIN ))
1596 LENGTH
=$
(( $LEADOUT/75 - $TRACK1/75 ))
1597 DISCID
=$
(( ( $N % 255 ) * 2**24 |
$LENGTH * 2**8 |
$TRACKS ))
1598 printf "%08x %i" $DISCID $TRACKS
1601 while [ $j -le $TRACKS ] ; do
1602 eval echo -n "\" \$TRACK$j\""
1605 echo " $(( $LEADOUT / 75 ))"
1609 # abcde.mkcue [--wholedisk]
1610 # This creates a cuefile directly from the extended discid information
1611 # The --wholedisk option controls whether we're ripping data from the
1612 # start of track one or from the start of the disk (usually, but not
1613 # always the same thing!)
1615 # Track one leadin/pregap (if any) handeling:
1616 # --wholedisk specified:
1619 # INDEX 01 <pregap value>
1620 # Remaining track index values unchanged from disc TOC
1622 # --wholedisk not specified
1624 # PREGAP <pregap value>
1626 # Remaining track index values offset by <pregap value>
1633 printf "$1%02i:%02i:%02i\n" $
(($2/4500)) $
((($2/75)%60)) $
(($2%75))
1636 local MODE DISCID TRACKS
1640 if [ "$1" = --wholedisc ] ; then
1652 echo REM DISCID
$DISCID
1653 echo FILE
\"dummy.wav
\" WAVE
1655 if [ $1 -ne 150 ] && [ $MODE = "PREGAP"] ; then
1662 while [ $i -le "$TRACKS" ] ; do
1663 LBA
=$
(( $1 - $OFFSET ))
1664 printf " TRACK %02i AUDIO\n" $i
1665 if [ $i -eq 1 -a $1 -ne 150 ] ; then
1666 if [ $MODE = PREGAP
] ; then
1667 echomsf
" PREGAP " $
(($OFFSET-150))
1669 echo " INDEX 00 00:00:00"
1672 echomsf
" INDEX 01 " $LBA
1679 # This essentially the start of things
1682 # Query the CD to get the track info, unless the user specified -C
1683 # or we are using some actions which do not need the CDDB data at all
1684 #if [ ! X"$EXPACTIONS" = "X" ]; then
1686 #elif [ -z "$DISCID" ]; then
1687 if [ -z "$DISCID" ]; then
1688 vecho
-n "Getting CD track info... "
1689 # In OSX, unmount the disc before a query
1690 if [ "$OSFLAVOUR" = "OSX" ]; then
1691 disktool
-u ${CDROM#/dev/}
1693 case "$CDROMREADERSYNTAX" in
1695 if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev
/null
2>&1 ; then
1696 case "$CUE2DISCID" in
1697 # FIXME # right now we have 2 cue2discid internal
1698 # implementations: builtin and abcde.cue2discid. Test
1699 # both of them and decide which one we want to use.
1701 #vecho "Using builtin cue2discid implementation..."
1702 CUESHEET
="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
1704 #TRACKS=$(echo $CUESHEET | egrep "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
1706 OFFSETTIMES
=( $
(echo "$CUESHEET" |
sed -n -e's/\ *INDEX 01\ \+//p' ) )
1707 TRACKS
=${#OFFSETTIMES[@]}
1709 #echo "processing offsetimes ${OFFSETTIMES[@]}"
1710 for OFFSETTIME
in ${OFFSETTIMES[@]}; do
1711 OFFSETS
="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
1712 #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
1715 LEADOUT
=$
(( $
(echo "$CUESHEET" |
grep lead-out | get_last
) / 44100 * 75 ))
1716 LEADIN
=$
(( $
(echo "$CUESHEET" |
grep lead-in | get_last
) / 44100 * 75 ))
1720 #vecho "Using external python cue2discid implementation..."
1721 TRACKINFO
=$
($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" |
$CUE2DISCID)
1725 log error
"the input flac file does not contain a cuesheet."
1730 # CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1732 # if [ ! "$RET" = "0" ];then
1733 # log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1736 # TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1737 # CDPARANOIAAUDIOTRACKS="$TRACKS"
1739 # LEADOUT="$(echo "$CDPARANOIAOUTPUT" | egrep -o '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
1740 # OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
1744 case "$CDDBMETHOD" in
1745 cddb
) TRACKINFO
=$
($CDDISCID "$CDROM") ;;
1746 # FIXME # musicbrainz needs a cleanup
1747 musicbrainz
) TRACKINFO
=$
($MUSICBRAINZ -c "$CDROM" ) ;;
1751 # Make sure there's a CD in there by checking cd-discid's return code
1752 if [ ! "$?" = "0" ]; then
1753 if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
1754 log error
"cuesheet information from the flac file could not be read."
1755 log error
"Perhaps the flac file does not contain a cuesheet?."
1758 log error
"CD could not be read. Perhaps there's no CD in the drive?"
1762 # In OSX, remount the disc again
1763 if [ "$OSFLAVOUR" = "OSX" ]; then
1764 disktool
-m ${CDROM#/dev/}
1767 DISCID
=$
(echo $TRACKINFO | cut
-f1 -d' ')
1769 TRACKINFO
=$
(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
1772 # Get a full enumeration of tracks, sort it, and put it in the TRACKQUEUE.
1773 # This needs to be done now because a section of the resuming code will need
1776 # get the number of digits to pad TRACKNUM with - we'll use this later
1777 # a CD can only hold 99 tracks, but since we support a feature for starting
1778 # numbering the tracks from a given number, we might need to set it as a
1779 # variable for the user to define... or obtain it somehow.
1780 if [ "$PADTRACKS" = "y" ] ; then
1784 ABCDETEMPDIR
="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
1785 if [ -z "$TRACKQUEUE" ]; then
1786 if [ ! "$STRIPDATATRACKS" = "n" ]; then
1787 case "$CDROMREADERSYNTAX" in
1789 if [ "$WEHAVEACD" = "y" ]; then
1790 vecho
"Querying the CD for audio tracks..."
1791 CDPARANOIAOUTPUT
="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1793 if [ ! "$RET" = "0" ];then
1794 log warning
"something went wrong while querying the CD... Maybe a DATA CD?"
1796 TRACKS
="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d ".
" | tr '\n' ' ')"
1797 CDPARANOIAAUDIOTRACKS
="$TRACKS"
1799 # Previous versions of abcde would store the tracks on a file, instead of the status record.
1800 if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
1801 echo cdparanoia-audio-tracks
=$
( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
1802 rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
1804 if [ -f "$ABCDETEMPDIR/status" ] && TRACKS
=$
(checkstatus cdparanoia-audio-tracks
); then :; else
1805 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1809 *) TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ') ;;
1812 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1814 if echo "$TRACKS" |
grep "[[:digit:]]" > /dev
/null
2>&1 ;then :;else
1815 log info
"The disc does not contain any tracks. Giving up..."
1818 echo -n "Grabbing entire CD - tracks: "
1819 if [ ! "$PADTRACKS" = "y" ] ; then
1820 TRACKNUMPADDING
=$
(echo -n $TRACKS |
wc -c |
tr -d ' ')
1822 TRACKS
=$
(printf "%0.${TRACKNUMPADDING}d" $TRACKS)
1824 while [ "$X" -ne "$TRACKS" ]
1826 X
=$
(printf "%0.${TRACKNUMPADDING}d" $
(expr $X + 1))
1827 TRACKQUEUE
=$
(echo $TRACKQUEUE $X)
1831 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1832 # User-supplied track queue.
1833 # Weed out non-numbers, whitespace, then sort and weed out duplicates
1834 TRACKQUEUE
=$
(echo $TRACKQUEUE |
sed 's-[^0-9 ]--g' |
tr ' ' '\n' |
grep -v ^$ |
sort -n |
uniq |
tr '\n' ' ' |
sed 's- $--g')
1835 # Once cleaned, obtain the highest value in the trackqueue for number padding
1836 for LASTTRACK
in $TRACKQUEUE; do :; done
1837 if [ ! "$PADTRACKS" = "y" ] ; then
1838 TRACKNUMPADDING
=$
(echo -n $LASTTRACK |
wc -c |
tr -d ' ')
1840 # Now we normalize the trackqueue
1841 for TRACK
in $TRACKQUEUE ; do
1842 TRACKNUM
=$
(printf %0.
${TRACKNUMPADDING}d $
(expr ${TRACK} + 0 ))
1843 PADTRACKQUEUE
=$
(echo $PADTRACKQUEUE $TRACKNUM)
1845 TRACKQUEUE
=$PADTRACKQUEUE
1846 echo Grabbing tracks
: "$TRACKQUEUE"
1849 QUEUEDTRACKS
=$
(echo $TRACKQUEUE |
wc -w |
tr -d ' ')
1851 # We have the discid, create a temp directory after it to store all the temp
1854 if [ -e "$ABCDETEMPDIR" ]; then
1855 echo -n "abcde: attempting to resume from $ABCDETEMPDIR"
1856 # It already exists, see if it's a directory
1857 if [ ! -d "$ABCDETEMPDIR" ]; then
1858 # This is a file/socket/fifo/device/etc, not a directory
1861 echo "abcde: file $ABCDETEMPDIR already exists and does not belong to abcde." >&2
1862 echo "Please investigate, remove it, and rerun abcde." >&2
1866 # It's a directory, let's see if it's owned by us
1867 if [ ! -O "$ABCDETEMPDIR" ]; then
1868 # Nope, complain and exit
1870 echo "abcde: directory $ABCDETEMPDIR already exists and is not owned by you." >&2
1871 echo "Please investigate, remove it, and rerun abcde." >&2
1875 # See if it's populated
1876 if [ ! -f "$ABCDETEMPDIR/discid" ]; then
1877 # Wipe and start fresh
1878 echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
1879 echo -n "this directory to continue. Continue? [y/n] (n)" >&2
1880 if [ "$INTERACTIVE" = "y" ]; then
1886 if [ "$ANSWER" != "y" ]; then
1889 rm -rf "$ABCDETEMPDIR" ||
exit 1
1890 mkdir
-p "$ABCDETEMPDIR"
1891 if [ "$?" -gt "0" ]; then
1892 # Directory already exists or could not be created
1893 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1897 # Everything is fine. Check for ^encodetracklocation-
1898 # and encode-output entries in the status file and
1899 # remove them. These are not relevant across sessions.
1900 if [ -f "$ABCDETEMPDIR/status" ]; then
1901 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
1902 grep -v ^encodetracklocation-
< "$ABCDETEMPDIR/status.old" \
1903 |
grep -v ^encode-output
> "$ABCDETEMPDIR/status"
1905 # Remove old error messages
1906 if [ -f "$ABCDETEMPDIR/errors" ]; then
1907 rm -f "$ABCDETEMPDIR/errors"
1911 # We are starting from scratch
1912 mkdir
-p "$ABCDETEMPDIR"
1913 if [ "$?" -gt "0" ]; then
1914 # Directory already exists or could not be created
1915 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1918 cat /dev
/null
> "$ABCDETEMPDIR/status"
1919 # Store the abcde version in the status file.
1920 echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
1922 if [ X
"$DOCUE" = "Xy" -a X
"$WEHAVEACD" = "Xy" ]; then
1923 if checkstatus cuefile
> /dev
/null
2>&1 ; then :; else
1924 CUEFILE
=cue-$
(echo "$TRACKINFO" | cut
-f1 -d' ').txt
1925 vecho
"Creating cue file..."
1926 case $CDROMREADERSYNTAX in
1928 if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
1929 echo cuefile
=$CUEFILE >> "$ABCDETEMPDIR/status"
1931 log warning
"the input flac file does not contain a cuesheet."
1935 if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
1936 echo cuefile
=$CUEFILE >> "$ABCDETEMPDIR/status"
1938 log warning
"reading the CUE sheet is still considered experimental"
1939 log warning
"and there was a problem with the CD reading. abcde will continue,"
1940 log warning
"but consider reporting the problem to the abcde author"
1946 # If we got the CDPARANOIA status and it is not recorded, save it now
1947 if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
1948 if checkstatus cdparanoia-audio-tracks
> /dev
/null
2>&1; then :; else
1949 echo cdparanoia-audio-tracks
=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
1953 # Create the discid file
1954 echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
1955 if checkstatus cddbmethod
> /dev
/null
2>&1 ; then :; else
1956 echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
1961 # Create a proper CUE file based on the CUE file we created before.
1964 if CUEFILE_IN
="$ABCDETEMPDIR"/$
(checkstatus cuefile
); then
1965 CUEFILE_OUT
=$CUEFILE_IN.out
1966 ### FIXME ### checkstatus cddb
1967 if [ -e "$CDDBDATA" ]; then
1968 vecho
"Adding metadata to the cue file..."
1969 # FIXME It doesn't preserve spaces! Why?
1970 # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
1972 echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
1973 echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
1974 # Set IFS to <newline> to prevent read from swallowing spaces and tabs
1978 cat "$CUEFILE_IN" |
while read line
1980 if echo "$line" |
grep "INDEX 01" > /dev
/null
2>&1 ; then
1981 # FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
1982 # echo "$line" >> "$CUEFILE_OUT"
1983 # if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
1984 eval track
="\$TRACK$n"
1986 echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
1988 # FIXME # If the lines above are uncommented, remove the line below.
1989 echo "$line" >> "$CUEFILE_OUT"
1992 mv "$CUEFILE_OUT" "$CUEFILE_IN"
1993 echo "cleancuefile" >> "$ABCDETEMPDIR/status"
1999 # Parses a CDDB file and outputs the title and the track names.
2000 # Variables: CDDBFILE
2004 # List out disc title/author and contents
2005 if [ "$ONETRACK" = "y" ]; then
2006 vecho
"ONETRACK mode selected: displaying only the title of the CD..."
2008 echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
2009 if [ X
"$SHOWCDDBYEAR" = "Xy" ]; then
2010 PARSEDYEAR
=$
(grep DYEAR
"${CDDBPARSEFILE}" | cut
'-d=' -f2-)
2011 if [ ! X
"$PARSEDYEAR" = "X" ]; then
2012 echo "Year: $PARSEDYEAR"
2015 if [ X
"$SHOWCDDBGENRE" = "Xy" ]; then
2016 PARSEDGENRE
=$
(grep DGENRE
"${CDDBPARSEFILE}" | cut
'-d=' -f2-)
2017 if [ ! X
"$PARSEDGENRE" = "X" ]; then
2018 echo "Genre: $PARSEDGENRE"
2021 if [ ! "$ONETRACK" = "y" ]; then
2022 for TRACK
in $
(f_seq_row
1 $TRACKS)
2024 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "${CDDBPARSEFILE}" | cut -f2- -d= | tr -d \\r\\n)"
2030 # Check for a local CDDB file, and report success
2033 if checkstatus cddb-readcomplete
&& checkstatus cddb-choice
>/dev
/null
; then :; else
2035 CDDBLOCALSTATUS
="notfound"
2036 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
2039 if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
2040 CDDBLOCALRESULTS
="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
2041 if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
2042 if (( $
(echo "${CDDBLOCALRESULTS}" |
wc -l) == 1 )); then
2043 CDDBLOCALFILE
="${CDDBLOCALRESULTS}"
2044 CDDBLOCALMATCH
=single
2045 elif (( $
(echo "${CDDBLOCALRESULTS}" |
wc -l) > 1 )); then
2046 CDDBLOCALMATCH
=multiple
2051 elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
2052 CDDBLOCALFILE
="${CDDBLOCALDIR}/${CDDBDISCID}"
2053 CDDBLOCALMATCH
=single
2058 # If the user has selected to check a local CDDB repo, we proceed with it
2059 case $CDDBLOCALMATCH in
2061 echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
2063 echo "$CDDBLOCALRESULTS" |
while read RESULT
; do
2065 # List out disc title/author and contents
2066 CDDBLOCALREAD
="$ABCDETEMPDIR/cddblocalread.$X"
2067 cat "$RESULT" > "${CDDBLOCALREAD}"
2070 do_cddbparse
"${CDDBLOCALREAD}"
2072 ##FIXME## QUICK HACK !!!!
2073 if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
2074 } >> "$ABCDETEMPDIR/cddblocalchoices"
2076 if [ $
(cat "$ABCDETEMPDIR/cddblocalchoices" |
wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
2077 page
"$ABCDETEMPDIR/cddblocalchoices"
2079 # It's all going to fit in one page, cat it
2080 cat "$ABCDETEMPDIR/cddblocalchoices" >&2
2082 CDDBLOCALCHOICES
=$
( echo "$CDDBLOCALRESULTS" |
wc -l )
2083 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2084 CDDBLOCALCHOICENUM
=-1
2085 if [ "$INTERACTIVE" = "y" ]; then
2086 while [ $CDDBLOCALCHOICENUM -lt 0 ] ||
[ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
2087 echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
2088 read CDDBLOCALCHOICE
2089 [ x
"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE
="1"
2090 # FIXME # Introduce diff's
2091 if echo $CDDBLOCALCHOICE |
egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2092 diffentries cddblocalread
"$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
2093 elif echo $CDDBLOCALCHOICE |
egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2094 # Make sure we get a valid choice
2095 CDDBLOCALCHOICENUM
=$
(echo $CDDBLOCALCHOICE |
xargs printf %d
2>/dev
/null
)
2096 if [ $CDDBLOCALCHOICENUM -lt 0 ] ||
[ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
2097 echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
2103 #echo "Selected ..."
2105 CDDBLOCALCHOICENUM
=1
2107 if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
2108 #echo "Using local copy of CDDB data"
2109 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2110 cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
2111 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2112 echo cddb-readcomplete
>> "$ABCDETEMPDIR/status"
2113 do_cddbparse
"$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
2114 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2115 CDDBLOCALSTATUS
="found"
2117 #echo "Not using local copy of CDDB data"
2118 CDDBLOCALSTATUS
="notfound"
2122 # List out disc title/author and contents
2123 do_cddbparse
"${CDDBLOCALFILE}"
2124 #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
2125 # echo -n "Embedded cuesheet entry found, use it? [y/n] (y): " >&2
2127 echo -n "Locally cached CDDB entry found, use it? [y/n] (y): " >&2
2129 if [ "$INTERACTIVE" = "y" ]; then
2131 while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
2132 echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
2135 [ x
"$USELOCALRESP" = "x" ] && USELOCALRESP
="y"
2139 if [ "$USELOCALRESP" = "y" ]; then
2140 #echo "Using local copy of CDDB data"
2141 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2142 cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
2143 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2144 echo cddb-readcomplete
>> "$ABCDETEMPDIR/status"
2145 do_cddbparse
"${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
2146 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2147 CDDBLOCALSTATUS
="single"
2149 #echo "Not using local copy of CDDB data"
2150 CDDBLOCALSTATUS
="notfound"
2154 CDDBLOCALSTATUS
="notfound"
2160 do_musicbrainzstat
()
2167 # Use MBE_TOCGetCDIndexId on a perl query
2174 # Perform CDDB protocol version check if it hasn't already been done
2175 if checkstatus cddb-statcomplete
; then :; else
2176 if [ "$CDDBAVAIL" = "n" ]; then
2178 echo 503 > "$ABCDETEMPDIR/cddbstat"
2181 CDDBUSER
=$
(echo $HELLOINFO | cut
-f1 -d'@')
2182 CDDBHOST
=$
(echo $HELLOINFO | cut
-f2- -d'@')
2183 while test $rc -eq 1 -a $CDDBPROTO -ge 3; do
2184 vecho
"Checking CDDB server status..."
2185 $CDDBTOOL stat
$CDDBURL $CDDBUSER $CDDBHOST $CDDBPROTO > "$ABCDETEMPDIR/cddbstat"
2186 RESPONSECODE
=$
(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut
-f1 -d' ')
2187 case "$RESPONSECODE" in
2188 210) # 210 OK, status information follows (until terminating `.')
2191 501|
*) # 501 Illegal CDDB protocol level: <n>.
2192 CDDBPROTO
=`expr $CDDBPROTO - 1`
2196 if test $rc -eq 1; then
2200 echo cddb-statcomplete
>> "$ABCDETEMPDIR/status"
2208 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
2209 CDDBLOCALFILE
="${CDDBLOCALDIR}/${CDDBDISCID}"
2211 # Perform CDDB query if it hasn't already been done
2212 if checkstatus cddb-querycomplete
; then :; else
2213 if [ "$CDDBAVAIL" = "n" ]; then
2215 echo 503 > "$ABCDETEMPDIR/cddbquery"
2216 # The default CDDBLOCALSTATUS is "notfound"
2217 # This part will be triggered if the user CDDB repo does not
2218 # contain the entry, or if we are not trying to use the repo.
2220 vecho
"Querying the CDDB server..."
2221 CDDBUSER
=$
(echo $HELLOINFO | cut
-f1 -d'@')
2222 CDDBHOST
=$
(echo $HELLOINFO | cut
-f2- -d'@')
2223 $CDDBTOOL query
$CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $TRACKINFO > "$ABCDETEMPDIR/cddbquery"
2229 # no match found in database,
2230 # wget/fetch error, or user requested not to use CDDB
2231 # Make up an error code (503) that abcde
2232 # will recognize in do_cddbread
2233 # and compensate by making a template
2234 echo 503 > "$ABCDETEMPDIR/cddbquery"
2236 *) # strange and unknown error
2237 echo ERRORCODE
=$ERRORCODE
2238 echo "abcde: $CDDBTOOL returned unknown error code"
2242 echo cddb-querycomplete
>> "$ABCDETEMPDIR/status"
2249 # If it's not to be used, generate a template.
2250 # Then, display it (or them) and let the user choose/edit it
2251 if checkstatus cddb-readcomplete
; then :; else
2252 vecho
"Obtaining CDDB results..."
2253 # If CDDB is to be used, interpret the query results and read all
2254 # the available entries.
2255 rm -f "$ABCDETEMPDIR/cddbchoices"
2256 CDDBCHOICES
=1 # Overridden by multiple matches
2257 RESPONSECODE
=$
(head -n 1 "$ABCDETEMPDIR/cddbquery" | cut
-f1 -d' ')
2258 case "$RESPONSECODE" in
2260 # One exact match, retrieve it
2261 # 200 [section] [discid] [artist] / [title]
2262 if checkstatus cddb-read-1-complete
; then :; else
2263 echo -n "Retrieving 1 CDDB match..." >> "$ABCDETEMPDIR/cddbchoices"
2264 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $
(cut
-f2,3 -d' ' "$ABCDETEMPDIR/cddbquery") > "$ABCDETEMPDIR/cddbread.1"
2265 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2266 echo cddb-read-1-complete
>> "$ABCDETEMPDIR/status"
2267 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2269 # List out disc title/author and contents
2270 echo ---- "$(cut '-d ' -f4- "$ABCDETEMPDIR/cddbquery
")" ---- >> "$ABCDETEMPDIR/cddbchoices"
2271 for TRACK
in $
(f_seq_row
1 $TRACKS)
2273 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2275 echo >> "$ABCDETEMPDIR/cddbchoices"
2279 case "$RESPONSECODE" in
2280 202) echo "No CDDB match." >> "$ABCDETEMPDIR/cddbchoices" ;;
2281 403|
409) echo "CDDB entry is corrupt, or the handshake failed." >> "$ABCDETEMPDIR/cddbchoices" ;;
2282 503) echo "CDDB unavailable." >> "$ABCDETEMPDIR/cddbchoices" ;;
2284 $CDDBTOOL template $
(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2285 # List out disc title/author and contents of template
2286 echo ---- Unknown Artist
/ Unknown Album
---- >> "$ABCDETEMPDIR/cddbchoices"
2288 for TRACK
in $
(f_seq_row
1 $TRACKS)
2290 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2292 echo >> "$ABCDETEMPDIR/cddbchoices"
2293 echo cddb-read-0-complete
>> "$ABCDETEMPDIR/status"
2294 echo cddb-choice
=0 >> "$ABCDETEMPDIR/status"
2297 # Multiple exact, (possibly multiple) inexact matches
2299 if [ "$RESPONSECODE" = "211" ]; then IN
=in; fi
2300 if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery
" | tr -d ' ')" -eq 3 ]; then
2301 echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
2302 tail -n +2 "$ABCDETEMPDIR/cddbquery" |
head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
2303 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2305 echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
2307 vecho
-n "Retrieving multiple matches... "
2308 grep -v ^
[.
]$
"$ABCDETEMPDIR/cddbquery" |
( X
=0
2309 read DISCINFO
# eat top line
2313 if checkstatus cddb-read-
$X-complete; then :; else
2314 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $
(echo $DISCINFO | cut
-f1,2 -d' ') > "$ABCDETEMPDIR/cddbread.$X"
2315 echo cddb-read-
$X-complete >> "$ABCDETEMPDIR/status"
2317 # List out disc title/author and contents
2318 echo \
#$X: ---- "$DISCINFO" ---- >> "$ABCDETEMPDIR/cddbchoices"
2319 for TRACK
in $
(f_seq_row
1 $TRACKS)
2321 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.
$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2323 echo >> "$ABCDETEMPDIR/cddbchoices"
2326 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2330 for TRACK
in $
(f_seq_row
1 $TRACKS)
2332 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2334 echo >> "$ABCDETEMPDIR/cddbchoices"
2335 echo cddb-read-1-complete
>> "$ABCDETEMPDIR/status"
2336 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2339 echo "cddb-readcomplete" >> "$ABCDETEMPDIR/status"
2346 if checkstatus cddb-edit
>/dev
/null
; then
2347 CDDBDATA
="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2348 VARIOUSARTISTS
="$(checkstatus variousartists)"
2349 VARIOUSARTISTSTYLE
="$(checkstatus variousartiststyle)"
2352 if [ "$INTERACTIVE" = "y" ]; then
2353 # We should show the CDDB results both when we are not using the local CDDB repo
2354 # or when we are using it but we could not find a proper match
2355 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] ||
[ ! "$CDDBUSELOCAL" = "y" ]; then
2356 # Display the $ABCDETEMPDIR/cddbchoices file created above
2357 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2358 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2359 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2360 CHOICE
=$
(checkstatus cddb-choice
)
2361 if [ -n "$CHOICE" ] ; then
2362 case $CDDBCHOICES in
2363 -1) if head -1 "$ABCDETEMPDIR/cddbquery" |
grep "^$" > /dev
/null
2>&1 ; then
2364 log error
"CDDB query failed!"
2367 cat "$ABCDETEMPDIR/cddbchoices"
2370 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2372 echo "Selected: #$CHOICE"
2373 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CHOICE"
2377 # The user has a choice to make, display the info in a pager if necessary
2378 if [ $
(cat "$ABCDETEMPDIR/cddbchoices" |
wc -l) -ge 24 ]; then
2379 page
"$ABCDETEMPDIR/cddbchoices"
2381 # It's all going to fit in one page, cat it
2382 cat "$ABCDETEMPDIR/cddbchoices" >&2
2386 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2388 # I'll take CDDB read #3 for $400, Alex
2389 while [ $CDCHOICENUM -lt 0 ] ||
[ $CDCHOICENUM -gt $CDDBCHOICES ]; do
2390 echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
2392 [ X
"$CDDBCHOICE" = "X" ] && CDDBCHOICE
=1
2393 if echo $CDDBCHOICE |
egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2394 if [ ! X
"$DIFF" = "X" ]; then
2395 PARSECHOICE1
=$
(echo $CDDBCHOICE | cut
-d"," -f1 |
xargs printf %d
2>/dev
/null
)
2396 PARSECHOICE2
=$
(echo $CDDBCHOICE | cut
-d"," -f2 |
xargs printf %d
2>/dev
/null
)
2397 if [ $PARSECHOICE1 -lt 1 ] ||
[ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
2398 [ $PARSECHOICE2 -lt 1 ] ||
[ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
2399 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
2400 echo "Invalid diff range. Please select two coma-separated numbers between 1 and $CDDBCHOICES" >&2
2402 # We parse the 2 choices to diff, store them in temporary files and diff them.
2403 for PARSECHOICE
in $
(echo $CDDBCHOICE |
tr , \
); do
2404 do_cddbparse
"$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
2406 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
2407 $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
2408 if [ $
(cat "$ABCDETEMPDIR/cddbread.diff" |
wc -l) -ge 24 ]; then
2409 page
"$ABCDETEMPDIR/cddbread.diff"
2411 cat "$ABCDETEMPDIR/cddbread.diff" >&2
2415 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
2417 elif echo $CDDBCHOICE |
egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2418 # Make sure we get a valid choice
2419 CDCHOICENUM
=$
(echo $CDDBCHOICE |
xargs printf %d
2>/dev
/null
)
2420 if [ $CDCHOICENUM -lt 0 ] ||
[ $CDCHOICENUM -gt $CDDBCHOICES ]; then
2421 echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
2425 if [ "$CDCHOICENUM" = "0" ]; then
2426 vecho
"Creating empty CDDB template..."
2428 $CDDBTOOL template $
(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2430 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.
$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2431 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
2433 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2437 # We need some code to show the selected option when local repository is selected and we have found a match
2438 vecho
"Using cached CDDB match..." >&2
2439 # Display the $ABCDETEMPDIR/cddbchoices file created above
2440 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2441 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2442 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2443 CHOICE
=$
(checkstatus cddb-choice
)
2444 if [ "$USELOCALRESP" = "y" ]; then :; else
2445 if [ -n "$CHOICE" ] ; then
2446 case $CDDBCHOICES in
2449 echo "Selected template."
2451 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2453 echo "Selected: #$CHOICE"
2454 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CHOICE"
2462 # We're noninteractive - pick the first choice.
2463 # But in case we run a previous instance and selected a choice, use it.
2464 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2465 # Show the choice if we are not using the locally stored one
2466 # or when the local search failed to find a match.
2467 PREVIOUSCHOICE
=$
(checkstatus cddb-choice
)
2468 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] ||
[ ! "$CDDBUSELOCAL" = "y" ]; then
2469 #if [ "$PREVIOUSCHOICE" ]; then
2470 cat "$ABCDETEMPDIR/cddbchoices"
2473 if [ ! -z "$PREVIOUSCHOICE" ] ; then
2474 CDCHOICENUM
=$PREVIOUSCHOICE
2477 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2479 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.
$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2484 if checkstatus cddb-choice
>/dev
/null
; then :; else
2485 echo "abcde: internal error: cddb-choice not recorded." >&2
2488 CDDBDATA
="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2489 echo -n "Edit selected CDDB data? [y/n] (" >&2
2490 if [ "$INTERACTIVE" = "y" ]; then
2491 if [ "$UNKNOWNDISK" = "y" ]; then
2494 [ "$EDITCDDB" != "n" ] && EDITCDDB
=y
2503 if [ "$EDITCDDB" = "y" ]; then
2504 CDDBDATAMD5SUM
=$
($MD5SUM "$CDDBDATA" | cut
-d " " -f 1);
2506 # Use the debian sensible-editor wrapper to pick the editor that the
2507 # user has requested via their $EDITOR environment variable
2508 if [ -x "/usr/bin/sensible-editor" ]; then
2509 /usr
/bin
/sensible-editor
"$CDDBDATA"
2510 elif [ -n "$EDITOR" ]; then
2511 if [ -x $
(which "${EDITOR%%\ *}") ]; then
2512 # That failed, try to load the preferred editor, starting
2513 # with their EDITOR variable
2514 eval $
(echo "$EDITOR") \"$CDDBDATA\"
2516 # If that fails, check for a vi
2517 elif which vi
>/dev
/null
2>&1; then
2519 elif [ -x /usr
/bin
/vim
]; then
2520 /usr
/bin
/vim
"$CDDBDATA"
2521 elif [ -x /usr
/bin
/vi
]; then
2522 /usr
/bin
/vi
"$CDDBDATA"
2523 elif [ -x /bin
/vi
]; then
2525 # nano should be on all (modern, i.e., sarge) debian systems
2526 elif which nano
>/dev
/null
2>&1 ; then
2528 elif [ -x /usr
/bin
/nano
]; then
2529 /usr
/bin
/nano
"$CDDBDATA"
2530 # mg should be on all OpenBSD systems
2531 elif which mg
>/dev
/null
2>&1 ; then
2533 elif [ -x /usr
/bin
/mg
]; then
2534 /usr
/bin
/mg
"$CDDBDATA"
2537 log warning
"no editor available. Check your EDITOR environment variable."
2539 # delete editor backup file if it exists
2540 if [ -w "$CDDBDATA~" ]; then
2545 # Some heuristics first. Look at Disc Title, and if it starts with
2546 # "Various", then we'll assume Various Artists
2547 if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
2548 echo "Looks like a Multi-Artist CD" >&2
2551 echo -n "Is the CD multi-artist? [y/n] (n): " >&2
2552 if [ "$INTERACTIVE" = "y" ]; then
2559 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
2562 # Need NUMTRACKS before cddb-tool will return it:
2563 NUMTRACKS
=$
(egrep '^TTITLE[0-9]+=' "$CDDBDATA" |
wc -l)
2564 if [ "$(grep -c "^TTITLE.
*\
/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2565 # More than 1/2 tracks contain a "/", so guess forward
2567 elif [ "$(grep -c "^TTITLE.
*\
-" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2568 # More than 1/2 contain a "-", so guess forward-dash
2570 elif [ "$(grep -c "^TTITLE.
*(.
*)" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2571 # More than 1/2 contain something in parens, so guess trailing-paren
2575 echo "1) Artist / Title" >&2
2576 echo "2) Artist - Title" >&2
2577 echo "3) Title / Artist" >&2
2578 echo "4) Title - Artist" >&2
2579 echo "5) Artist: Title" >&2
2580 echo "6) Title (Artist)" >&2
2581 echo "7) This is a single-artist CD" >&2
2582 echo -n "Which style of multiple artist entries is it? [1-7] ($DEFAULTSTYLE): " >&2
2583 if [ "$INTERACTIVE" = "y" ]; then
2584 read VARIOUSARTISTSTYLE
2586 echo $DEFAULTSTYLE >&2
2587 VARIOUSARTISTSTYLE
=$DEFAULTSTYLE
2589 VARIOUSARTISTSTYLE
=$
(echo 0$VARIOUSARTISTSTYLE |
xargs printf %d
)
2590 # If they press Enter, then the default style (0) was chosen
2591 while [ $VARIOUSARTISTSTYLE -lt 0 ] ||
[ $VARIOUSARTISTSTYLE -gt 7 ]; do
2592 echo "Invalid selection. Please choose a number between 1 and 7."
2593 echo -n "Selection [1-7]: "
2594 read VARIOUSARTISTSTYLE
2595 VARIOUSARTISTSTYLE
=$
(echo 0$VARIOUSARTISTSTYLE |
xargs printf %d
)
2597 if [ "$VARIOUSARTISTSTYLE" = "0" ]; then
2598 VARIOUSARTISTSTYLE
=$DEFAULTSTYLE
2600 vecho
"Selected: $VARIOUSARTISTSTYLE"
2601 case "$VARIOUSARTISTSTYLE" in
2603 VARIOUSARTISTSTYLE
=forward
2606 VARIOUSARTISTSTYLE
=forward-dash
2609 VARIOUSARTISTSTYLE
=reverse
2612 VARIOUSARTISTSTYLE
=reverse-dash
2615 VARIOUSARTISTSTYLE
=colon
2618 VARIOUSARTISTSTYLE
=trailing-paren
2626 echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
2627 echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
2629 if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
2630 if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
2631 # This works but does not have the necessary error checking
2632 # yet. If you are familiar with the CDDB spec
2633 # (see http://www.freedb.org/src/latest/DBFORMAT)
2634 # and can create an error-free entry on your own, then put
2635 # UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
2636 # abcde.conf to enable it. Put CDDBSUBMIT=email@address in
2637 # your abcde.conf to change the email address submissions are
2640 # submit the modified file, if they want
2641 if [ "$NOSUBMIT" != "y" ]; then
2642 echo -n "Do you want to submit this entry to $CDDBSUBMIT? [y/n] (n): "
2644 while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
2645 [ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
2647 echo -n 'Invalid selection. Please answer "y" or "n": '
2650 if [ "$YESNO" = "y" ] ||
[ "$YESNO" = "Y" ]; then
2651 echo -n "Sending..."
2652 $CDDBTOOL send
"$CDDBDATA" $CDDBSUBMIT
2659 # User CDDBLOCALPOLICY to find out if we store the file or not...
2660 # Cache edited CDDB entry in the user's cddb dir
2661 if [ "$CDDBCOPYLOCAL" = "y" ]; then
2662 # Make sure the cache directory exists
2663 mkdir
-p $CDDBLOCALDIR
2664 cat "$CDDBDATA" |
tail -n $
(expr $
(cat "$CDDBDATA" |
wc -l ) - 1 ) > ${CDDBLOCALDIR}/$
(echo "$TRACKINFO" | cut
-d' ' -f1)
2667 echo "cddb-edit" >> "$ABCDETEMPDIR/status"
2670 # do_cdread [tracknumber]
2671 # do_cdread onetrack [firsttrack] [lasttrack]
2675 # The commands here don't go through run_command because they're never supposed to be silenced
2676 # return codes need to be doublechecked anyway, however
2677 if [ "$1" = "onetrack" ]; then
2678 # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
2679 # FIXME # Until then, we grab the whole CD in one track, no matter what
2681 # We need the first and last track for cdda2wav
2683 LASTTRACK
=$
(expr $3 + 0)
2684 UTRACKNUM
=$FIRSTTRACK
2685 case "$CDROMREADERSYNTAX" in
2686 flac
) READTRACKNUMS
="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
2689 # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
2690 READTRACKNUMS
="$FIRSTTRACK-$LASTTRACK" ;;
2691 cdda2wav
) READTRACKNUMS
="$FIRSTTRACK+$LASTTRACK" ;;
2692 *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
2698 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
2699 if [ "$USEPIPES" = "y" ]; then
2700 TEMPARG
="PIPERIPPER_$CDROMREADERSYNTAX"
2701 FILEARG
="$( eval echo "\$
$TEMPARG" )"
2703 PIPE_MESSAGE
="and encoding "
2705 WAVDATA
="$ABCDETEMPDIR/track$UTRACKNUM.wav"
2706 case "$CDROMREADERSYNTAX" in
2707 ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
2709 FILEARG
="--output-name=$WAVDATA"
2712 FILEARG
="-f $WAVDATA"
2720 if [ "$1" = "onetrack" ]; then
2721 echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
2723 if [ -r "$CDDBDATA" ]; then
2724 getcddbinfo TRACKNAME
2725 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
2727 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
2730 case "$CDROMREADERSYNTAX" in
2731 ### FIXME ### use an exception for flac, since it uses -o
2732 ### FIXME ### Shall we just use -o $FILEARG ??
2734 # Avoid problems wit math expressions by unpadding the given UTRACKNUM
2735 STRIPTRACKNUM
=$
(expr $UTRACKNUM + 0)
2736 nice
$READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
2738 nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" $REDIR ;;
2740 if [ "$OSFLAVOUR" = "OSX" ] ; then
2741 # Hei, we have to unmount the device before running anything like cdda2wav in OSX
2742 disktool
-u ${CDROM#/dev/} 0
2743 # Also, in OSX the cdrom device for cdda2wav changes...
2744 CDDA2WAVCDROM
="IODVDServices"
2745 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2746 CDDA2WAVCDROM
="$CDROMID"
2748 if [ "$CDROMID" = "" ]; then
2749 CDDA2WAVCDROM
="$CDROM"
2751 CDDA2WAVCDROM
="$CDROMID"
2754 nice
$READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" $REDIR
2756 ## FIXME ## We have an exception for dagrab, since it uses -f
2757 ## FIXME ## Shall we just use -f $FILEARG ??
2758 dagrab
) nice
$READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" $REDIR
2761 # Find the track's mounted path
2762 REALTRACKNUM
=$
(expr $UTRACKNUM + 0)
2763 FILEPATH
=$
(mount |
grep "$CDROM on" |
sed 's/^[^ ]* on \(.*\) (.*/\1/')
2764 FILEPATH
=$
(find "$FILEPATH" |
grep "/$REALTRACKNUM ");
2765 # If the file exists, copy it
2766 if [ -e "$FILEPATH" ] ; then
2767 nice
$READNICE $CDROMREADER "$FILEPATH" "$FILEARG" $REDIR
2771 debug
) nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" $REDIR
2775 # If we get some error or we get some missing wav
2776 # (as long as we dont use pipes)
2777 if [ "$RETURN" != "0" -o \
( ! -s "$WAVDATA" -a X
"$USEPIPES" != "Xy" \
) ]; then
2778 # Thank goodness errors is only machine-parseable up to the
2779 # first colon, otherwise this woulda sucked
2780 if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
2781 RETURN
=73 # fake a return code as cdparanoia return 0 also on aborted reads
2783 if [ "$USEPIPES" = "y" ]; then
2784 echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2786 echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2790 if [ "$USEPIPES" = "y" ]; then
2791 echo readencodetrack-
$UTRACKNUM >> "$ABCDETEMPDIR/status"
2793 echo readtrack-
$UTRACKNUM >> "$ABCDETEMPDIR/status"
2795 if [ "$1" = "onetrack" ]; then
2796 echo onetrack
>> "$ABCDETEMPDIR/status"
2802 # No values accepted, only uses env variables
2805 if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev
/null
; then
2806 vecho
"Setting CD speed to ${CDSPEEDVALUE}x"
2808 echo "abcde: unable to set the device speed" >&2
2814 # vecho outputs a message if EXTRAVERBOSE is selected
2817 if [ x
"$EXTRAVERBOSE" != "x" ]; then
2819 warning
) shift ; log warning
"$@" ;;
2827 # decho outputs a debug message if DEBUG is selected
2830 if [ x
"$DEBUG" != "x" ]; then
2831 if echo $1 |
grep "^\[" > /dev
/null
2>&1 ; then
2832 DEBUGECHO
=$
(echo "$@" |
tr -d '[]')
2833 echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
2840 # User-redefinable functions
2841 # Custom filename munging:
2844 #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
2845 echo "$@" |
sed s
,:,\
-,g |
tr \
/ __ |
tr -d \'\"\?\
[:cntrl
:\
]
2848 # Custom genre munging:
2851 echo $CDGENRE |
tr "[:upper:]" "[:lower:]"
2855 # Empty pre_read function, to be defined in the configuration file.
2862 # Empty post_read function, to be defined in the configuration file.
2868 ###############################################################################
2871 # Start of execution
2872 ###############################################################################
2877 # Defaults to FreeDB, but a python musicbrainz can be used
2879 CDDBURL
="http://freedb.freedb.org/~cddb/cddb.cgi"
2880 CDDBSUBMIT
=freedb-submit@freedb.org
2882 HELLOINFO
="$(whoami)@$(hostname)"
2884 CDDBLOCALPOLICY
="always"
2885 CDDBLOCALRECURSIVE
="y"
2886 CDDBLOCALDIR
="$HOME/.cddb"
2889 # List of fields we parse and show during the CDDB parsing...
2890 SHOWCDDBFIELDS
="year,genre"
2893 #CDROMREADERSYNTAX=cdparanoia
2894 ENCODERSYNTAX
=default
2896 MP3ENCODERSYNTAX
=default
2897 OGGENCODERSYNTAX
=default
2898 FLACENCODERSYNTAX
=default
2899 SPEEXENCODERSYNTAX
=default
2900 MPPENCODERSYNTAX
=default
2901 AACENCODERSYNTAX
=default
2902 NORMALIZERSYNTAX
=default
2903 CUEREADERSYNTAX
=default
2905 OUTPUTFORMAT
='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
2906 # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
2907 #VAOUTPUTFORMAT=${OUTPUTFORMAT}
2908 VAOUTPUTFORMAT
='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
2909 ONETRACKOUTPUTFORMAT
='${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
2910 VAONETRACKOUTPUTFORMAT
='Various-${ALBUMFILE}/${ALBUMFILE}'
2911 PLAYLISTFORMAT
='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2912 PLAYLISTDATAPREFIX
=''
2913 VAPLAYLISTFORMAT
='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2914 VAPLAYLISTDATAPREFIX
=''
2922 VARIOUSARTISTSTYLE
=forward
2929 # If using scsi devices, cdda2wav needs a CDROMID, instead of a device node
2930 # i.e. CDROMID="1,0,0"
2932 # If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
2933 # If we are using the ide-scsi emulation layer, we need to define a "g"
2934 CDPARANOIACDROMBUS
="d"
2936 # program paths - defaults to checking your $PATH
2943 XINGMP3ENC
=xingmp3enc
2960 CDPARANOIA
=cdparanoia
2966 MUSICBRAINZ
=musicbrainz-get-tracks
2970 VORBISCOMMENT
=vorbiscomment
2972 NORMALIZE
=normalize-audio
2974 VORBISGAIN
=vorbisgain
2982 # Options for programs called from abcde
3017 VORBISCOMMENTOPTS
="-R"
3018 METAFLACOPTS
="--no-utf8-convert"
3021 # Default to one process if -j isn't specified
3024 # List of actions to perform - by default, run to completion
3025 ACTIONS
=cddb
,read,encode
,tag
,move
,clean
3027 # This option is basicaly for Debian package dependencies:
3028 # List of prefered outputs - by default, run with whatever we have in the path
3029 DEFAULT_OUTPUT_BINARIES
=vorbis
:oggenc
,flac
:flac
,mp3
:toolame
,mp3
:lame
,mp3
:bladeenc
,spx
:speex
,m4a
:faac
3031 # List of prefered cdromreaders - by default, run whichever we have in the path
3032 DEFAULT_CDROMREADERS
="cdparanoia cdda2wav"
3034 # List of quality levels associated with the encoders:
3035 DEFAULT_QUALITY_XLO
="oggenc:-q -1,lame:-q 9,speex:--quality 1,m4a:"
3036 DEFAULT_QUALITY_LO
="oggenc:-q 1,lame:-q 7,speex:--quality 5,m4a:"
3037 DEFAULT_QUALITY_HI
="oggenc:-q 7,lame:--preset standard,speex:--quality 9,m4a:"
3038 DEFAULT_QUALITY_XHI
="oggenc:-q 10,lame:--preset extreme,speex:--quality 10,m4a:"
3040 # Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
3041 # Linux/OpenBSD. ftp is user for NetBSD.
3042 # Let's use these checkings to determine the OS flavour, which will be used
3044 if [ X$
(uname
) = "XFreeBSD" ] ; then
3049 elif [ X$
(uname
) = "XDarwin" ] ; then
3052 # We should have disktool in OSX, but let's be sure...
3054 CDROMREADERSYNTAX
=cddafs
3055 elif [ X$
(uname
) = "XOpenBSD" ] ; then
3059 elif [ X$
(uname
) = "XNetBSD" ] ; then
3063 elif [ X$
(uname
) = "SunOS" ] ; then
3071 # If CDDBAVAIL is set to n, no CDDB read is done
3072 # If USEID3 is set to n, no ID3 tagging is done
3078 # But before we get into business, let us chop off any GREP environmental
3083 if [ -z "$OUTPUTDIR" ]; then
3087 if [ -z "$WAVOUTPUTDIR" ]; then
3088 WAVOUTPUTDIR
="$OUTPUTDIR"
3091 # Load system defaults
3092 if [ -r /etc
/abcde.conf
]; then
3095 # Load user preference defaults
3096 if [ -r $HOME/.abcde.conf
]; then
3100 # By this time, we need some HTTPGETOPTS already defined.
3101 # If the user has defined a non-default HTTPGET method, we should not be empty.
3103 if [ "$HTTPGETOPTS" = "" ] ; then
3105 wget
) HTTPGETOPTS
="-q -nv -O -";;
3106 curl
) HTTPGETOPTS
="-f -s";;
3107 fetch
)HTTPGETOPTS
="-q -o -";;
3108 ftp) HTTPGETOPTS
="-a -V -o - ";;
3109 *) log warning
"HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
3113 # If the CDROM has not been set yet, find a suitable one.
3114 # If this is a devfs system, default to /dev/cdroms/cdrom0
3115 # instead of /dev/cdrom
3116 if [ "$CDROM" = "" ] ; then
3117 if [ -e /dev
/cdroms
/cdrom0
]; then
3118 CDROM
=/dev
/cdroms
/cdrom0
3119 elif [ -e /dev
/cdrom
]; then
3121 elif [ -e /dev
/cd0c
]; then
3123 elif [ -e /dev
/acd0c
]; then
3125 elif [ -e /dev
/disk1
]; then
3130 # Parse command line options
3131 #while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPq:r:Rs:S:t:T:vVxw:W: opt ; do
3132 while getopts 1a
:bBc
:C
:d
:Defghj
:klLmMnNo
:pPr
:s
:S
:t
:T
:UvVxX
:w
:W
:z opt
; do
3135 a
) ACTIONS
="$OPTARG" ;;
3136 A
) EXPACTIONS
="$OPTARG" ;;
3138 B
) NOBATCHREPLAYGAIN
=y
;;
3139 c
) if [ -e "$OPTARG" ] ; then .
"$OPTARG" ; else log error
"config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
3140 C
) DISCID
="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
3141 d
) CDROM
="$OPTARG" ;;
3144 e
) ERASEENCODEDSTATUS
=y
;;
3145 E
) ENCODING
="$OPTARG" ;;
3149 j
) MAXPROCS
="$OPTARG" ;;
3152 L
) CDDBUSELOCAL
=y
;;
3157 o
) OUTPUTTYPE
="$OPTARG" ;;
3160 q
) QUALITYLEVEL
="$OPTARG" ;;
3161 r
) REMOTEHOSTS
="$OPTARG" ;;
3162 R
) CDDBLOCALRECURSIVE
=y
;;
3163 s
) SHOWCDDBFIELDS
="$OPTARG" ;;
3164 S
) CDSPEEDVALUE
="$OPTARG" ;;
3165 t
) STARTTRACKNUMBER
="$OPTARG" ;;
3166 T
) STARTTRACKNUMBER
="$OPTARG" ; STARTTRACKNUMBERTAG
="y" ;;
3169 echo "This is abcde v$VERSION."
3170 echo "Usage: abcde [options] [tracks]"
3171 echo "abcde -h for extra help"
3174 V
) EXTRAVERBOSE
="y" ;;
3176 X
) CUE2DISCID
="$OPTARG" ;;
3177 w
) COMMENT
="$OPTARG" ;;
3178 W
) if echo $OPTARG |
grep "[[:digit:]]" > /dev
/null
2>&1 ; then
3179 STARTTRACKNUMBER
="${OPTARG}01"
3180 STARTTRACKNUMBERTAG
="y"
3181 COMMENT
="CD${OPTARG}"
3182 DISCNUMBER
="${OPTARG}"
3184 log error
"argument of -W must be integer"
3188 z
) DEBUG
=y
; CDROMREADERSYNTAX
=debug
; EJECTCD
="n" ;;
3193 shift $
(($OPTIND - 1))
3195 # Here it comes the worse part of the whole thing. From here until we start
3196 # ripping, we have a mixture of sanity checks, verifications, default settigs
3197 # and other crazy stuff that interdepends, but hey, someone has to do it.
3199 # If NOCDDBQUERY is set, don't query the CDDB server.
3200 if [ "$NOCDDBQUERY" = "y" ]; then
3204 # If the user specified a flac file, then switch to special flac mode
3205 if echo "$CDROM" |
grep -i '.flac$' > /dev
/null
2>&1 ; then
3206 if [ ! -f "$CDROM" ]; then
3207 log error
"the defined file for FLAC ripping cannot be found" >&2
3210 vecho warning
"switching to flac CDROMREADERSYNTAX..."
3211 CDROMREADERSYNTAX
=flac
3212 # We have a builtin version of cue2discid...
3213 case "$CUE2DISCID" in
3215 *) NEEDCUE2DISCID
=y
;;
3221 # If the user provided a DISCID, disable eject
3222 if [ -n "$DISCID" ] ||
[ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD
=n
; fi
3224 # Check the available cd rippers in the system, from the ones we know.
3225 if [ "$CDROMREADERSYNTAX" = "" ]; then
3226 for DEFAULT_CDROMREADER
in $DEFAULT_CDROMREADERS; do
3227 if new_checkexec
$DEFAULT_CDROMREADER; then
3228 CDROMREADERSYNTAX
=$DEFAULT_CDROMREADER
3232 if [ "$CDROMREADERSYNTAX" = "" ]; then
3233 log error
"no cdreader found in your PATH"
3234 log error
"hints: are all dependencies installed? has the \$PATH been modified?"
3239 # Decide if we can continue.
3240 if [ "$ONETRACK" = "y" ]; then
3241 # FIXME # remove check as soon as we find out about the other readers
3242 case "$CDROMREADERSYNTAX" in
3246 *) log error
"$CDROMREADERSYNTAX does not support ONETRACK mode"
3249 if [ "$BATCHNORM" = "y" ]; then
3250 log warning
"BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
3253 if [ "$NOGAP" = "y" ]; then
3254 log warning
"NOGAP mode is not compatible with ONETRACK mode. Disabling..."
3257 # It does not matter how many tracks we want. In ONETRACK mode we grab them all
3258 # FIXME # allow ranges of tracks to be selected for onetrack ripping
3259 if [ $# -gt 0 ]; then
3260 log warning
"ONETRACK mode selected, grabbing all tracks..."
3263 while [ $# -gt 0 ]; do
3264 # Range parsing code courtesy of Vincent Ho
3265 RSTART
=$
(echo $1 | cut
-f1 -d-)
3266 REND
=$
(echo $1 | cut
-f2 -d-)
3267 if [ "$RSTART" = "$REND" ]; then
3270 NEWTRACKS
=$
(f_seq_line
$RSTART $REND)
3272 TRACKQUEUE
=$
(echo "$TRACKQUEUE" "$NEWTRACKS")
3277 # List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
3278 # List of experimental actions: retag,transcode
3280 # Determine what actions are to be done from $ACTIONS and set the
3281 # following environment variables for them:
3293 ## FIXME ## Lets keep compatibility with -M
3294 [ "$DOCUE" != "y" ] && DOCUE
=n
3296 for ACTION
in $
(echo $ACTIONS |
tr , \
)
3299 default
) DOCDDB
=y
; DOREAD
=y
; DOENCODE
=y
; DOTAG
=y
; DOMOVE
=y
; DOCLEAN
=y
;;
3300 cue
) DOCUE
=y
; MAKECUEFILE
=y
;;
3303 normalize
) DONORMALIZE
=y
; DOREAD
=y
;;
3304 # preprocess) DOPREPROCESS=y; DOREAD=y;;
3305 encode
) DOENCODE
=y
; DOREAD
=y
;;
3306 # postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
3307 tag
) DOTAG
=y
; DOREAD
=y
; DOENCODE
=y
; DOCDDB
=y
;;
3308 move
) DOMOVE
=y
; DOTAG
=y
; DOREAD
=y
; DOENCODE
=y
; DOCDDB
=y
;;
3309 replaygain
) DOCDDB
=y
; DOREAD
=y
; DOENCODE
=y
; DOTAG
=y
; DOMOVE
=y
; DOREPLAYGAIN
=y
;;
3310 playlist
) DOCDDB
=y
; DOPLAYLIST
=y
;;
3315 if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
3316 # FIXME # should we abort on error or just inform the user?
3317 log warning
"selected both normalize and replaygain actions"
3320 for SHOWCDDBFIELD
in $
(echo $SHOWCDDBFIELDS |
tr , \
); do
3321 case $SHOWCDDBFIELD in
3322 y
*|Y
*) SHOWCDDBYEAR
="y";;
3323 g
*|G
*) SHOWCDDBGENRE
="y";;
3328 # At this point a CDROM has to be defined, so we check it exists.
3329 if [ X
"$CDROM" != "X" ] ; then
3330 if [ "$CDROMREADERSYNTAX" = "cdda2wav" ] && [ "$NEEDCDROMID" = "y" ] ; then
3331 if [ "$OSFLAVOUR" = "FBSD" ]; then
3332 if echo "$CDROMID" |
grep "^[0-9],[0-9],[0-9]$" >/dev
/null
2>&1 ; then :; else
3333 log error
"CDROMID not in the right format for $CDROMREADERSYNTAX"
3334 log error
"Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
3338 elif [ ! -e "$CDROM" -a X
"$DOREAD" = "Xy" ]; then
3339 log error
"CDROM device cannot be found."
3342 # avoid processing if we are not going to hit the CDROM.
3343 elif [ X
"$DOREAD" = "Xy" ]; then
3344 log error
"CDROM has not been defined or cannot be found"
3348 # USEPIPES pre-tests, before we get into more serious stuff
3349 # Not compatible with:
3350 # - multiple outputs
3352 # - lowdisk algorithm
3354 if [ X
"$USEPIPES" = "Xy" ]; then
3355 if [ $
(echo "$OUTPUTTYPE" |
tr , \ |
wc -w ) -gt 1 ]; then
3356 log error
"Unix pipes not compatible with multiple outputs"
3359 if [ X
"$DONORMALIZE" = "Xy" ]; then
3360 log error
"Unix pipes not compatible with normalizer"
3361 # FIXME # Do we need to exit or shall we just disable the mode?
3364 if [ X
"$BATCHNORM" = "Xy" ]; then
3365 log error
"Unix pipes not compatible with BATCHNORM encoding"
3368 if [ X
"$NOGAP" = "Xy" ]; then
3369 log error
"Unix pipes not compatible with NOGAP encoding"
3372 if [ X
"$DOENCODE" = "Xn" ]; then
3373 vecho warning
"Disabling Unix pipes since we are not encoding!"
3376 if [ X
"$LOWDISK" = "Xy" ]; then
3377 log error
"Unix pipes not compatible with lowdisk algorithm"
3382 # LOWDISK pre-tests, before we get into more problematic stuff
3383 # Not compatible with anything that needs all the files in the hard disc:
3386 if [ X
"$LOWDISK" = "Xy" ]; then
3387 if [ X
"$BATCHNORM" = "Xy" ]; then
3388 log error
"Unix pipes not compatible with BATCHNORM encoding"
3391 if [ X
"$NOGAP" = "Xy" ]; then
3392 log error
"Unix pipes not compatible with NOGAP encoding"
3397 # BATCHNORM pre-tests, before we get into serious problems
3398 # Not compatible with
3399 if [ "$BATCHNORM" = "y" ] && [ "$DONORMALIZE" = "n" ]; then
3400 vecho warning
"Disabling BATCHNORM since we are not normalizing!"
3404 # Check the encoding format from the ones available in the system, if nothing has been configured.
3405 if [ X
"$OUTPUTTYPE" = "X" ]; then
3406 for DEFAULT_OUTPUT
in $
( echo "$DEFAULT_OUTPUT_BINARIES" |
tr , \
); do
3407 DEFAULT_OUTPUT_FORMAT
="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 1)"
3408 DEFAULT_OUTPUT_BINARY
="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 2)"
3409 if [ -x $
(which $DEFAULT_OUTPUT_BINARY) ] ; then
3410 OUTPUTTYPE
=$DEFAULT_OUTPUT_FORMAT
3411 vecho
"No default output type defined. Autoselecting $OUTPUTTYPE..." >&2
3415 if [ X
"$OUTPUTTYPE" = "X" ]; then
3416 log error
"no encoder found in the PATH"
3417 log error
"hints: are all dependencies installed? has the \$PATH been modified?"
3422 # Decide which CDROM reader we're gonna use
3423 case "$CDROMREADERSYNTAX" in
3425 CDROMREADER
="$CDPARANOIA"
3426 CDROMREADEROPTS
="$CDPARANOIAOPTS"
3429 CDROMREADER
="$CDDA2WAV"
3430 CDROMREADEROPTS
="$CDDA2WAVOPTS"
3433 CDROMREADER
="$DAGRAB"
3434 CDROMREADEROPTS
="$DAGRABOPTS"
3437 CDROMREADER
="$CDDAFS"
3438 CDROMREADEROPTS
="$CDDAFSOPTS"
3442 CDROMREADEROPTS
="$FLACOPTS"
3446 # There's only one normalize...
3447 case "$NORMALIZERSYNTAX" in
3449 NORMALIZER
="$NORMALIZE"
3450 NORMALIZEROPTS
="$NORMALIZEOPTS"
3454 # Allow -o OUTPUT(1):OPTIONS(1),...,OUTPUT(N):OPTIONS(N) mode of operation
3455 if echo "$OUTPUTTYPE" |
grep ":" > /dev
/null
2>&1 ; then
3456 for OUTPUT
in "$(echo "$OUTPUTTYPE" | tr \ \|| tr , \ | tr \| \ )"; do
3458 vorbis
:*|ogg
:*) OGGENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3459 mp3
:*) MP3ENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3460 flac
:*) FLACENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3461 spx
:*) SPEEXENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3462 mpc
:*) MPPENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3463 m4a
:*) AACENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3466 for OUTPUT
in "$(echo "$OUTPUTTYPE" | tr , \ )"; do
3467 TEMPOUTPUT
=$
( echo "$OUTPUT" | cut
-d: -f1 )
3468 TEMPOUTPUTTYPE
="${TEMPOUTPUTTYPE:+$TEMPOUTPUTTYPE,}$TEMPOUTPUT"
3470 OUTPUTTYPE
="$TEMPOUTPUTTYPE"
3473 # If nothing has been specified, use oggenc for oggs and lame for mp3s and flac
3474 # for flacs and speexenc for speex and mppenc for mpps and faac for m4as
3476 # Getting ready for multiple output changes
3477 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
3481 [ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX
=oggenc
3482 [ "$DOTAG" = "y" ] && NEEDCOMMENTER
=y
3483 [ "$DOREPLAYGAIN" = "y" ] && NEEDVORBISGAIN
=y
3484 OGGOUTPUTCONTAINER
=ogg
3487 [ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX
=lame
3488 [ "$DOTAG" = "y" ] && NEEDTAGGER
=y
3489 [ "$DOREPLAYGAIN" = "y" ] && NEEDMP3GAIN
=y
3492 [ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX
=flac
3493 [ "$DOTAG" = "y" ] && NEEDMETAFLAC
=y
3494 [ "$DOREPLAYGAIN" = "y" ] && NEEDMETAFLAC
=y
3495 [ "$ONETRACK" = "y" ] && [ "$DOCUE" = "y" ] && NEEDMETAFLAC
=y
3498 [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX
=speexenc
3499 # [ "$DOREPLAYGAIN" = "y" ] &&
3502 [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX
=mppenc
3503 [ "$DOREPLAYGAIN" = "y" ] && NEEDMPPGAIN
=y
3506 [ "$AACENCODERSYNTAX" = "default" ] && AACENCODERSYNTAX
=faac
3509 if [ "$KEEPWAVS" = "y" ]; then
3510 vecho
"Setting the KEEPWAVS option, since the resulting wav files were requested..."
3514 *) log error
"Invalid OUTPUTTYPE defined"
3520 # decide which encoder
3521 case "$MP3ENCODERSYNTAX" in
3523 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$LAMEOPTS}"
3527 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$TOOLAMEOPTS}"
3528 MP3ENCODER
="$TOOLAME"
3531 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$GOGOOPTS}"
3535 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$BLADEENCOPTS}"
3536 MP3ENCODER
="$BLADEENC"
3539 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$L3ENCOPTS}"
3543 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$XINGMP3ENCOPTS}"
3544 MP3ENCODER
="$XINGMP3ENC"
3547 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$MP3ENCOPTS}"
3548 MP3ENCODER
="$MP3ENC"
3551 case "$OGGENCODERSYNTAX" in
3553 OGGENCODEROPTS
="${OGGENCODEROPTSCLI:-$VORBIZEOPTS}"
3554 OGGENCODER
="$VORBIZE"
3557 OGGENCODEROPTS
="${OGGENCODEROPTSCLI:-$OGGENCOPTS}"
3558 OGGENCODER
="$OGGENC"
3561 case "$FLACENCODERSYNTAX" in
3563 FLACENCODEROPTS
="${FLACENCODEROPTSCLI:-$FLACOPTS}"
3565 # FLAC streams can be encapsulated on a Ogg transport layer
3566 if echo "$FLACENCODEROPTS" |
egrep -- "(^| )--ogg($| )" > /dev
/null
2>&1 ;then
3567 log error
"FLAC on an Ogg container is not yet supported"
3568 log error
"due to problem with adding comments to such files"
3570 FLACOUTPUTCONTAINER
=ogg
3572 FLACOUTPUTCONTAINER
=flac
3576 case "$SPEEXENCODERSYNTAX" in
3578 SPEEXENCODEROPTS
="${SPEEXENCODEROPTSCLI:-$SPEEXENCOPTS}"
3579 SPEEXENCODER
="$SPEEXENC"
3582 case "$MPPENCODERSYNTAX" in
3584 MPPENCODEROPTS
="${MPPENCODEROPTSCLI:-$MPPENCOPTS}"
3585 MPPENCODER
="$MPPENC"
3588 case "$AACENCODERSYNTAX" in
3590 AACENCODEROPTS
="${AACENCODEROPTSCLI:-$AACENCOPTS}"
3591 AACENCODER
="$AACENC"
3596 if [ "$ID3TAGV" = "1" ]; then
3598 TAGGEROPTS
="$ID3OPTS"
3601 TAGGEROPTS
="$ID3V2OPTS"
3604 # Specific for NOGAP is the use of lame. Another encoder fails...
3605 if [ "$NOGAP" = "y" ] && [ ! "$MP3ENCODER" = "lame" ]; then
3606 log warning
"the NOGAP option is specific of lame. Deactivating..."
3611 case "$CUEREADERSYNTAX" in
3613 CUEREADEROPTS
="${CDROM}"
3618 # which information retrieval tool are we using?
3624 # Check if both OGGEOUTPUTCONTAINER and FLACOUTPUTCONTAINER are the same, and differentiante them
3625 if [ X
"$OGGOUTPUTCONTAINER" = "Xogg" ] && [ X
"$FLACOUTPUTCONTAINER" = "Xogg" ]; then
3626 log error
"FLAC on an Ogg container is not yet supported"
3627 log error
"due to problem with adding comments to such files"
3629 OGGOUTPUTCONTAINER
=ogg.ogg
3630 FLACOUTPUTCONTAINER
=flac.ogg
3631 vecho warning
"modified file endings due to conflicting transport layers in Ogg/Vorbis and Ogg/FLAC"
3634 # Clean up nice options (either use '-n NICELEVEL or -NICELEVEL')
3636 if [ "$ENCNICE" ]; then
3637 ENCNICE
="-n $ENCNICE"
3639 if [ "$READNICE" ]; then
3640 READNICE
="-n $READNICE"
3642 if [ "$DISTMP3NICE" ]; then
3643 DISTMP3NICE
="-n $DISTMP3NICE"
3646 # Don't check for stuff if it's not needed
3647 if [ "$REMOTEHOSTS" ]; then
3650 if [ "$DONORMALIZE" = "y" ]; then
3653 if [ "$EJECTCD" = "y" ]; then
3656 if [ ! "$CDDBAVAIL" = "n" ] && [ "$DOCDDB" = "y" ]; then
3657 if [ "$CDDBMETHOD" = "cddb" ]; then
3659 elif [ "$CDDBMETHOD" = "musicbrainz" ]; then
3663 if [ "$DOCUE" = "y" ]; then
3667 if [ X
"$CDSPEEDVALUE" != "X" ] && [ "$DOREAD" = "y" ]; then
3668 case "$CDROMREADERSYNTAX" in
3669 cdparanoia|debug
) CDROMREADEROPTS
="$CDPARANOIAOPTS -S $CDSPEEDVALUE" ;;
3670 ### FIXME ### translate "cue2discid" from python to bash
3671 flac
) NEEDMETAFLAC
=y
; NEEDCUE2DISCID
=y
; CDSPEEDVALUE
="" ;;
3676 ###USEPIPESSUPPORT###
3678 # Rippers with USEPIPE support
3679 # FIXME # Include here all the rippers we can figure out support pipes
3680 PIPERIPPER_cdparanoia
="-"
3681 PIPERIPPER_debug
="-"
3682 PIPERIPPER_flac
="-c "
3684 # Encoders with USEPIPE support
3685 # FIXME # Include here all the encoders we can figure out support pipes
3691 # Figure out if we can use pipes with the ripper/encoder combination
3693 if [ "$USEPIPES" = "y" ]; then
3694 PIPERIPPERSVARCHECK
="PIPERIPPER_${CDROMREADERSYNTAX}"
3697 PIPEENCODERSVARCHECK
="PIPE_$MP3ENCODERSYNTAX" ;;
3699 PIPEENCODERSVARCHECK
="PIPE_$OGGENCODERSYNTAX" ;;
3701 PIPEENCODERSVARCHECK
="PIPE_$FLACENCODERSYNTAX" ;;
3703 PIPEENCODERSVARCHECK
="PIPE_$SPEEXENCODER" ;;
3705 PIPEENCODERSVARCHECK
="PIPE_$MPPENCODER" ;;
3707 decho
"PIPERIPPERSVARCHECK: $( eval echo "\$
$PIPERIPPERSVARCHECK" )"
3708 if [ "$( eval echo "\$
$PIPERIPPERSVARCHECK" )" = "$" ] || \
3709 [ "$( eval echo "\$
$PIPERIPPERSVARCHECK" )" = "" ] ; then
3710 log error
"no support for pipes with given ripper"
3711 log error
"read the USEPIPES file from the source tarball to get help."
3712 log error
"On a Debian system, it is under /usr/share/doc/abcde/USEPIPES.gz"
3715 decho
"PIPEENCODERSVARCHECK: $( eval echo "\$
$PIPEENCODERSVARCHECK" )"
3716 if [ "$( eval echo "\$
$PIPEENCODERSVARCHECK" )" = "$" ] || \
3717 [ "$( eval echo "\$
$PIPEENCODERSVARCHECK" )" = "" ] ; then
3718 log error
"no support for pipes with given encoder"
3719 log error
"read the USEPIPES file from the source tarball to help"
3720 log error
"on a Debian system, read /usr/share/doc/abcde/USEPIPES.gz"
3725 # Make sure a buncha things exist
3726 for X
in $CDROMREADER $CDDISCID ${NEEDTAGGER+$TAGGER} $MP3ENCODER \
3727 $OGGENCODER $FLACENCODER $SPEEXENCODER $MPPENCODER \
3729 ${NEEDHTTPGET+$HTTPGET} ${NEEDDISTMP3+$DISTMP3} \
3730 ${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC} \
3731 ${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT} \
3732 ${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED} \
3733 ${NEEDVORBISGAIN+$VORBISGAIN} ${NEEDMP3GAIN+$MP3GAIN} \
3734 ${NEEDMPPGAIN+$MPPGAIN} ${NEEDCUEREADER+$CUEREADER} \
3735 ${NEEDCUE2DISCID+$CUE2DISCID}
3740 # And last but not least, check if we can diff between files. We do not abort,
3741 # since diffing is not critical...
3742 if [ -x $
(which $DIFF) ]; then :; else
3743 vecho warning
"Disabling diff since we cannot find it in the \$PATH..."
3747 ## Now that we have metaflac, check if we need cue2discid
3748 #case $CDROMREADERSYNTAX in
3750 # TRACKINFO=$($METAFLAC --show-tag=CDDB $CDROM | cut -d"=" -f2 | egrep "[a-f0-9]{8}")
3751 # if [ "$TRACKINFO" = "" ]; then
3752 # checkexec ${NEEDCUE2DISCID+$CUE2DISCID}
3757 CDROMREADER
="$CDROMREADER $CDROMREADEROPTS"
3758 CDDBTOOL
="$CDDBTOOL $CDDBTOOLOPTS"
3759 HTTPGET
="$HTTPGET $HTTPGETOPTS"
3761 # Here it used to say:
3762 # One thousand lines in, we can start doing stuff with things
3763 # Well, right now we are at line 3737 ;)
3765 # Export needed things so they can be read in this subshell
3766 export CDDBTOOL ABCDETEMPDIR TRACKQUEUE LOWDISK EJECTCD EJECT EJECTOPTS
3767 export CDROM CDDBDATA REMOTEHOSTS MAXPROCS HTTPGET MD5SUM
3769 if [ "$DOREAD" = "y" ]; then
3770 # User-definable function to set some things. Use it for
3771 # - closing the CD tray with eject -t
3772 # - set the CD speed value with eject -x
3773 vecho
-n "Executing customizable pre-read function... "
3775 pre_read
# Execute the user-defined pre-read funtion. Close the CD with it.
3780 case "$CDDBMETHOD" in
3782 do_discid
# Get ABCDETEMPDIR created and status file initialized
3789 if [ "$DOCDDB" = "y" ]; then
3790 # start with a sane default:
3791 CDDBLOCALSTATUS
=notfound
3792 if [ $CDDBUSELOCAL = "y" ]; then
3795 if checkstatus cddb-choice
> /dev
/null
; then
3798 if [ "$CDDBLOCALSTATUS" = "notfound" ] ; then
3799 case "$CDDBMETHOD" in
3813 eval "$($CDDBTOOL parse "$CDDBDATA")"
3816 # Before reading tracks, we set the speed of the device
3818 if [ X
"$CDSPEEDVALUE" != "X" ]; then
3819 case "$CDROMREADERSYNTAX" in
3820 cdparanoia|debug
) ;;
3826 # Define the first and last track, since we might need them later in several places
3827 FIRSTTRACK
=$
( get_first
$TRACKQUEUE )
3828 LASTTRACK
=$
( get_last
$TRACKQUEUE )
3830 if [ -f "$ABCDETEMPDIR/status" ] && [ X
"$ERASEENCODEDSTATUS" = "Xy" ]; then
3831 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
3832 grep -v ^encodetracklocation-
< "$ABCDETEMPDIR/status.old" \
3833 |
grep -v ^encode-output
> "$ABCDETEMPDIR/status"
3836 if checkstatus onetrack
; then ONETRACK
=y
; fi
3838 if [ "$ONETRACK" = "y" ]; then
3839 # Reuse the CUEFILE in case we created it (now or in a previous run)
3840 if CUEFILE
=$
(checkstatus cuefile
); then
3845 # Create playlist if needed (backgroundable) and start reading in tracks
3849 if [ ! "$ONETRACK" = "y" ]; then
3850 if [ "$DOPLAYLIST" = "y" ]; then
3851 echo Creating playlist...
>&2
3856 # For the lowdisk option, only one program is running at once so the encoder
3857 # can be unsilenced right away.
3858 if [ "$LOWDISK" = "y" ] ||
[ "$ONETRACK" = "y" ]; then
3859 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3862 if [ "$ONETRACK" = "y" ]; then
3863 TRACKS
="$FIRSTTRACK"
3864 if [ "$USEPIPES" = "y" ]; then
3865 if checkstatus readencodetrack-
$FIRSTTRACK; then :; else
3866 do_cdread onetrack
$FIRSTTRACK $LASTTRACK | do_encode
$FIRSTTRACK %local0
% > /dev
/null
2>&1
3869 if checkstatus readtrack-
$FIRSTTRACK; then :; else
3870 do_cdread onetrack
$FIRSTTRACK $LASTTRACK
3874 for UTRACKNUM
in $TRACKQUEUE
3876 if [ "$DOREAD" = "y" ]; then
3877 if [ "$USEPIPES" = "y" ]; then
3878 if checkstatus readencodetrack-
$UTRACKNUM; then :; else
3879 # Read, pipe, shut up!
3880 do_cdread
$UTRACKNUM | do_encode
$UTRACKNUM %local0
% > /dev
/null
2>&1
3883 if checkstatus readtrack-
$UTRACKNUM; then :; else
3884 do_cdread
$UTRACKNUM
3886 if [ "$?" != "0" ]; then
3887 # CD read failed - don't give the goahead to
3894 if [ "$NOGAP" = "y" ] ||
[ "$BATCHNORM" = "y" ]; then
3897 # If we are not reading, set the encode output to loud already, so
3898 # that we can see the output of the first track.
3899 if [ "$MAXPROCS" = "1" ] && [ ! "$DOREAD" = "y" ]; then
3900 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3902 echo NEXTTRACK
# Get the encoder machine churning again
3903 if [ "$DOREAD" = "y" ]; then
3904 if [ "$LOWDISK" = "y" ] && [ "$DOENCODE" = "y" ]; then
3905 until checkstatus encodetrack-
$UTRACKNUM
3907 if checkerrors encodetrack-
$UTRACKNUM; then
3918 # Now that we're done the encoding can be loud again -
3919 # if we're not using SMP.
3920 if [ "$MAXPROCS" = "1" ]; then
3921 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3924 # All tracks read, start encoding.
3925 if [ "$NOGAP" = "y" ] ||
[ "$BATCHNORM" = "y" ] ||
[ "$ONETRACK" = "y" ]; then
3929 # Execute the user-defined post_read funtion before ejecting CD
3932 # We are now finished with the cdrom - it can be safely ejected. Note that
3933 # abcde will not have completed yet.
3934 if [ "$EJECTCD" = "y" ] && [ -x $
(which $EJECT) ]; then
3935 # We check if the disk we are processing is actually the disk inside the
3936 # CD tray. If not, we do not eject the CD, since it might be so that the
3937 # user ejected it manually.
3938 #CURRENTTRACKINFO=$($CDDISCID $CDROM)
3939 #if if [ "$?" != "1" ] && [ "$CURRENTTRACKINFO" = "$TRACKINFO" ] ; then
3940 # More FreeBSD bits.
3941 if [ X
"$(uname)" = X
"FreeBSD" ] ; then
3942 # FreeBSD eject uses the EJECT environment variable to name the CDROM
3943 # but in this script EJECT is in the envionment and names the program
3946 # The FreeBSD eject needs "adc0" not "/dev/adc0c"
3947 cd="$(echo $CDROM | sed -e 's=.*/==;s=[a-h]$==;')"
3948 $eject $EJECTOPTS $cd
3949 elif [ X
"$(uname)" = X
"Darwin" ] ; then
3950 disktool
-e ${CDROM#/dev/} 0
3952 $EJECT $EJECTOPTS "$CDROM"
3959 ## Do we need to pre-process
3960 #if [ x"$PREPROCESS" = "x" ] ; then
3963 # for PRETRACKNUM in $TRACKQUEUE
3966 # if [ "$GOAHEAD" = "NO" ]; then break; fi
3968 # until [ $PREPROCEED ]
3970 # if checkstatus readtrack-$PRETRACKNUM; then PREPROCEED=y; break; fi
3971 # # all locations are working, wait and try again later
3972 # if [ ! $PREPROCEED ]; then sleep 3; fi
3974 # ( do_preprocess $PRETRACKNUM
3982 # In BATCHNORM and/or NOGAP modes, we want all tracks to be read first.
3984 if [ "$BATCHNORM" = "y" ] ||
[ "$NOGAP" = "y" ]; then
3985 read GOAHEAD
# For blocking - will contain either "NO" or "NEXTTRACK"
3986 if [ "$GOAHEAD" = "NO" ]; then break; fi
3987 for LASTTRACK
in $TRACKQUEUE; do :; done
3988 if checkstatus readtrack-
$LASTTRACK; then
3989 if [ "$DONORMALIZE" = "y" ] && [ "$BATCHNORM" = "y" ]; then
3990 if checkstatus normalizetrack-
$LASTTRACK; then :; else do_batch_normalize
; fi
3991 if checkerrors batch-normalize
; then exit 1; fi
3993 if [ "$DOENCODE" = "y" ] && [ "$NOGAP" = "y" ]; then
3994 if [ "$DONORMALIZE" = "y" ]; then
3995 for UTRACKNUM
in $TRACKQUEUE
3997 if checkstatus readtrack-
$UTRACKNUM; then
3998 if checkstatus normalizetrack-
$UTRACKNUM; then :; else do_normalize
$UTRACKNUM; fi
4002 if checkstatus encodetrack-
$LASTTRACK; then :; else do_nogap_encode
; fi
4003 if checkerrors nogap-encode
; then exit 1; fi
4008 # If we are using ONETRACK, we can proceed with the normal encoding using just the $FIRSTTRACK as TRACKQUEUE
4009 if [ "$ONETRACK" = "y" ] ; then
4010 TRACKQUEUE
="$FIRSTTRACK"
4011 TRACKS
="$FIRSTTRACK"
4014 # Do the encoding, including parallelization of remote encoding
4015 # Figure out where each track is going to be encoded
4016 ENCODELOCATIONS
="$(echo $REMOTEHOSTS | tr , ' ')"
4017 if [ "$MAXPROCS" != "0" ]; then
4018 for NUM
in $
(f_seq_row
1 "$MAXPROCS")
4020 ENCODELOCATIONS
="$ENCODELOCATIONS %local$NUM%"
4024 ENCODELOCATIONS
=$
(echo $ENCODELOCATIONS)
4025 for UTRACKNUM
in $TRACKQUEUE
4028 read GOAHEAD
# For blocking - will contain either "NO" or "NEXTTRACK"
4029 if [ "$GOAHEAD" = "NO" ]; then break; fi
4030 # find out where this track is to be encoded
4031 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
4032 # Make sure we have a place to encode this, if not, exit stage right
4033 if [ -z "$ENCODELOCATIONS" ]; then
4039 for LOCATION
in $ENCODELOCATIONS
4041 PREVIOUSTRACK
="$(checkstatus encodetracklocation-$LOCATION)"
4042 # check first if a track has ever been assigned to this location
4043 if [ -z "$PREVIOUSTRACK" ]; then PROCEED
=y
; break; fi
4044 # If it errored out, rebuild $ENCODELOCATIONS without this location in it
4045 if checkerrors encodetrack-
$PREVIOUSTRACK; then
4046 for TEMPLOCATION
in $ENCODELOCATIONS
4048 if [ "$TEMPLOCATION" != "$LOCATION" ]; then
4049 TEMPENCODELOCATIONS
="$TEMPENCODELOCATIONS $TEMPLOCATION"
4052 ENCODELOCATIONS
=$
(echo $TEMPENCODELOCATIONS)
4057 # We're still here, this location must have been previously assigned,
4058 # and last completed without error - check if it's done with the
4059 # previous track yet
4060 if checkstatus encodetrack-
$PREVIOUSTRACK; then PROCEED
=y
; break; fi
4062 # all locations are working, wait and try again later
4063 if [ ! $PROCEED ]; then sleep 3; fi
4065 # Record the location we're about to encode the next track at
4066 echo "encodetracklocation-$LOCATION=$UTRACKNUM" >> "$ABCDETEMPDIR/status"
4068 # Don't proceed with the rest of the loop if we can't encode
4069 if [ "$ABORT" ]; then continue; fi
4070 ## FIXME ## Add here
4071 ## run_command tagtrack-$OUTPUT-$1 $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
4072 # Set TRACKNUM, TRACKNAME
4073 if [ -e "$CDDBDATA" ]; then
4074 if [ "$ONETRACK" = "y" ]; then
4076 TRACKNUM
="$FIRSTTRACK"
4080 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
4081 getcddbinfo TRACKNAME
4085 # You can't encode a file which needs to be normalized before finishing
4086 # You can't tag a file before it's finished encoding -
4087 # thus all of this is backgrounded together
4089 if [ "$DONORMALIZE" = "y" ]; then
4090 if checkstatus readtrack-
$UTRACKNUM; then
4091 if checkstatus normalizetrack-
$UTRACKNUM; then :; else do_normalize
$UTRACKNUM; fi
4094 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
4095 if checkstatus readtrack-
$UTRACKNUM; then
4096 #if checkstatus encodetrack-$UTRACKNUM; then :; else do_encode $UTRACKNUM $LOCATION; fi
4097 if [ "$DONORMALIZE" = "y" ]; then
4098 if checkstatus normalizetrack-
$UTRACKNUM; then
4099 if checkstatus encodetrack-
$UTRACKNUM; then :; else do_encode
$UTRACKNUM $LOCATION $OUTPUT; fi
4102 if checkstatus encodetrack-
$UTRACKNUM; then :; else do_encode
$UTRACKNUM $LOCATION $OUTPUT; fi
4106 if [ "$DOTAG" = "y" ]; then
4107 if checkstatus encodetrack-
$UTRACKNUM; then
4108 if checkstatus tagtrack-
$UTRACKNUM; then :; else do_tag
$UTRACKNUM; fi
4110 # Lets tag the cue file
4111 if checkstatus cleancuefile
>/dev
/null
; then :; else
4112 if checkstatus cuefile
>/dev
/null
; then
4117 if [ "$DOMOVE" = "y" ]; then
4118 if checkstatus tagtrack-
$UTRACKNUM; then
4119 if checkstatus movetrack-
$UTRACKNUM; then :; else do_move
$UTRACKNUM; fi
4126 # Go through it again and make sure there's no distmp3 stragglers, otherwise
4127 # we'll delete the files they're working on
4128 # Do NOT play ball if there is no ball to play (so ABORT if needed)
4129 ## FIXME ## Check also for files which are encoded using PIPEs.
4130 if [ "$DOENCODE" = "y" ] && [ "$USEPIPES" != "y" ] && [ ! "$ABORT" ]; then
4135 for LOCATION
in $ENCODELOCATIONS
4137 CHECKTRACK
="$(checkstatus encodetracklocation-$LOCATION)"
4138 # "How can he give us a status update, if he's DEAD?"
4139 if checkstatus encodetrack-
$CHECKTRACK; then
4142 # Nothing to see here please go quietly back to your homes
4143 if [ -z "$CHECKTRACK" ]; then continue; fi
4144 # You're still here? Maybe there is something...
4145 if checkstatus encodetrack-
$CHECKTRACK; then :; else PROCEED
= ; break; fi
4148 if [ ! $PROCEED ]; then sleep 5; fi
4151 # If the above didn't catch the stragglers, this will
4153 if [ "$DOREPLAYGAIN" = "y" ]; then
4157 # Check to see if run_command logged any errors
4158 if [ -f "$ABCDETEMPDIR/errors" ]; then
4159 log error
"The following commands failed to run:"
4160 cat "$ABCDETEMPDIR/errors"
4164 if [ "$KEEPWAVS" = "y" ];then
4168 # Check if we have moved all the formats we had previously encoded, if we are not using the FORCE.
4169 if [ "$DOCLEAN" = "y" ] && [ ! "$FORCE" = "y" ]; then
4170 ENCODED_FORMATS
=$
(egrep "^encodetrack-(.{3,6})-(.{1,2})$" "$ABCDETEMPDIR/status" | cut
-d"-" -f2 |
sort -u |
tr '\n' '|')
4171 MOVED_FORMATS
=$
(egrep "^movetrack-output-(.{3,6})$" "$ABCDETEMPDIR/status" | cut
-d"-" -f3 |
sort -u |
tr '\n' '|')
4172 if [ "$ENCODED_FORMATS" != "$MOVED_FORMATS" ]; then
4173 log warning
"The encoded formats does not match with the moved ones"
4174 log warning
"Formats encoded: $( echo $ENCODED_FORMATS | tr "|
" " " )"
4175 log warning
"Formats moved: $( echo $MOVED_FORMATS | tr "|
" " " )"
4176 log warning
"Use \"abcde -a clean -f -C $DISCID\" to force the removal of the remaining data."
4180 if [ "$DOCLEAN" = "y" ]; then
4181 # Wipe all the evidence
4182 # Gimme gimme gimme some more time!
4184 rm -rf "$ABCDETEMPDIR"
4187 echo "Finished. Not cleaning $ABCDETEMPDIR."