* Sort options alphabetically (Closes issue 58).
[clinton/abcde.git] / abcde
1 #!/bin/bash
2 # Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
3 # Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
4 # This code is hereby licensed for public consumption under either the
5 # GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
6 #
7 # You should have received a copy of the GNU General Public License along
8 # with this program; if not, write to the Free Software Foundation, Inc.,
9 # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
10 #
11 # Copyright for this work is to expire January 1, 2010, after which it
12 # shall be public domain.
13 #
14 # $Id$
15
16 VERSION='2.5.3-UNRELEASED'
17
18 usage ()
19 {
20 echo "This is abcde v$VERSION."
21 echo "Usage: abcde [options] [tracks]"
22 echo "Options:"
23 echo "-1 Encode the whole CD in a single file"
24 echo "-a <action1[,action2]...>"
25 echo " Actions to perform:"
26 echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
27 #echo "-A Experimental actions (retag, transcode)"
28 echo "-b Enable batch normalization"
29 #echo "-B Disable batch replaygain (do file by file)"
30 echo "-c <file>"
31 echo " Specify a configuration file (overrides system and user config files)"
32 echo "-C <discid#>"
33 echo " Specify discid to resume from (only needed if you no longer have the cd)"
34 echo "-d <device>"
35 echo " Specify CDROM device to grab (flac uses a single-track flac file)"
36 echo "-D Debugging mode (equivalent to sh -x abcde)"
37 echo "-e Erase encoded track information from status file"
38 echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
39 echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
40 echo "-h This help information"
41 #echo "-i Tag files while encoding, when possible (local only) -NWY-"
42 echo "-j <#> Number of encoder processes to run at once (localhost)"
43 echo "-k Keep the wav tracks for later use"
44 echo "-l Use low disk space algorithm"
45 echo "-L Use local CDDB storage directory"
46 echo "-m Modify playlist to include CRLF endings, to comply with some players"
47 #echo " WARNING: Deprecated. Use \"cue\" action"
48 #echo "-M Create a CUE file"
49 echo "-n No lookup. Don't query CDDB, just create and use template"
50 echo "-N Noninteractive. Never prompt for anything"
51 echo "-o <type1[,type2]...>"
52 echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
53 echo "-p Pad track numbers with 0's (if less than 10 tracks)"
54 echo "-P Use UNIX pipes to read+encode without wav files"
55 echo "-q <level>"
56 echo " Set quality level (high,medium,low)"
57 echo "-r <host1[,host2]...>"
58 echo " Also encode on these remote hosts"
59 echo "-R Use local CDDB in recursive mode"
60 echo "-s <field>"
61 echo " Show fields from the CDDB info (year,genre)"
62 echo "-S <#> Set the CD speed"
63 echo "-t <#> Start the track numbering at a given number"
64 echo "-T <#> Same as -t but modifies tag numbering"
65 echo "-U Do NOT use UNICODE (UTF8) tags and comments"
66 echo "-v Show version number and exit"
67 echo "-V Be a bit more verbose about what is happening behind the scenes"
68 echo "-x Eject CD after all tracks are read"
69 echo "-w <comment>"
70 echo " Add a comment to the CD tracks"
71 echo "-W <#> Concatenate CDs: -T #01 -w \"CD #\""
72 echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
73 echo ""
74 echo "Tracks is a space-delimited list of tracks to grab."
75 echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
76 echo ""
77 #echo "Double hyphens are used to concatenate tracks"
78 }
79
80 addstatus ()
81 {
82 echo "$@" >> "$ABCDETEMPDIR/status"
83 }
84
85 # log [level] [message]
86 #
87 # log outputs the right message in a common format
88 log ()
89 {
90 BLURB="$1"
91 shift
92 case $BLURB in
93 error) echo "[ERROR] abcde: $@" >&2 ;;
94 warning) echo "[WARNING] $@" >&2 ;;
95 info) echo "[INFO] $@" ;;
96 esac
97 }
98
99 # Funtions to replace the need of seq, which is too distribution dependant.
100 f_seq_row ()
101 {
102 i=$1
103 while [ $i -ne `expr $2 + 1` ]
104 do
105 echo $i
106 i=`expr $i + 1`
107 done
108 }
109
110 f_seq_line ()
111 {
112 i=$1
113 if echo $i | grep "[[:digit:]]" > /dev/null 2>&1 ; then
114 while [ $i -ne `expr $2 + 1` ]
115 do
116 printf $i" "
117 i=`expr $i + 1`
118 done
119 echo
120 else
121 log error "syntax error while processing track numbers ($i)"
122 exit 1
123 fi
124 }
125
126 # Functions to replace the need of awk {print $1} and {print $NF}
127 get_first()
128 {
129 if [ X"$1" = "X" ]; then
130 for first in `cat`; do
131 break
132 done
133 else
134 first=$1
135 fi
136 echo $first
137 }
138
139 get_last()
140 {
141 if [ X"$1" = "X" ]; then
142 for stdin in `cat`; do
143 last=$stdin
144 done
145 else
146 for last in $@ ; do :; done
147 fi
148 echo $last
149 }
150
151 # checkstatus [blurb]
152 # Returns "0" if the blurb was found, returns 1 if it wasn't
153 # Puts the blurb content, if available, on stdout.
154 # Otherwise, returns "".
155 checkstatus ()
156 {
157 # Take the last line in the status file if there's multiple matches
158 PATTERN="^$1(=.*)?$"
159 BLURB=$(grep -E $PATTERN "$ABCDETEMPDIR/status" | tail -n 1)
160
161 if [ -z "$BLURB" ]; then
162 # No matches found
163 return 1
164 else
165 # Matches found
166 # See if there's a = in it
167 if [ "$(echo $BLURB | grep -c =)" != "0" ]; then
168 echo "$(echo $BLURB | cut -f2- -d=)"
169 fi
170 return 0
171 fi
172 }
173
174 # checkwarnings [blurb]
175 # Returns "0" if the blurb was found (meaning there was an warning),
176 # returns 1 if it wasn't (yes this is a little backwards).
177 # Does not print the blurb on stdout.
178 # Otherwise, returns "".
179 checkwarnings ()
180 {
181 if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
182 return 1
183 fi
184 # Take the last line in the status file if there's multiple matches
185 PATTERN="^$1(:.*)?$"
186 BLURB="$(grep -E $PATTERN "$ABCDETEMPDIR/warnings" | tail -n 1)"
187
188 if [ -z "$BLURB" ]; then
189 # negative, we did not have a negative...
190 return 1
191 else
192 # affirmative, we had a negative...
193 return 0
194 fi
195 }
196
197 # checkerrors [blurb]
198 # Returns "0" if the blurb was found (meaning there was an error),
199 # returns 1 if it wasn't (yes this is a little backwards).
200 # Does not print the blurb on stdout.
201 # Otherwise, returns "".
202 checkerrors ()
203 {
204 if [ -e "$ABCDETEMPDIR/errors" ]; then :; else
205 return 1
206 fi
207 # Take the last line in the status file if there's multiple matches
208 PATTERN="^$1(:.*)?$"
209 BLURB="$(grep -E $PATTERN "$ABCDETEMPDIR/errors" | tail -n 1)"
210
211 if [ -z "$BLURB" ]; then
212 # negative, we did not have a negative...
213 return 1
214 else
215 # affirmative, we had a negative...
216 return 0
217 fi
218 }
219
220 # page [file]
221 # Finds the right pager in the system to display a file
222 page ()
223 {
224 PAGEFILE="$1"
225 # Use the debian sensible-pager wrapper to pick the pager
226 # user has requested via their $PAGER environment variable
227 if [ -x "/usr/bin/sensible-pager" ]; then
228 /usr/bin/sensible-pager "$PAGEFILE"
229 elif [ -x "$PAGER" ]; then
230 # That failed, try to load the preferred editor, starting
231 # with their PAGER variable
232 $PAGER "$PAGEFILE"
233 # If that fails, check for less
234 elif [ -x /usr/bin/less ]; then
235 /usr/bin/less -f "$PAGEFILE"
236 # more should be on all UNIX systems
237 elif [ -x /bin/more ]; then
238 /bin/more "$PAGEFILE"
239 else
240 # No bananas, just cat the thing
241 cat "$PAGEFILE" >&2
242 fi
243 }
244
245 # run_command [blurb] [command...]
246 # Runs a command, silently if necessary, and updates the status file
247 run_command ()
248 {
249 vvecho "$@"
250 BLURB="$1"
251 shift
252 # See if this is supposed to be silent
253 if [ "$(checkstatus encode-output)" = "loud" ]; then
254 "$@" >&2
255 RETURN=$?
256 else
257 # Special case for SMP, since
258 # encoder output is never displayed, don't mute echos
259 if [ -z "$BLURB" -a "$MAXPROCS" != "1" ]; then
260 "$@" >&2
261 RETURN=$?
262 else
263 "$@" >/dev/null 2>&1
264 RETURN=$?
265 fi
266 fi
267 case "$1" in
268 normalize|normalize-audio)
269 if [ "$RETURN" = "2" ]; then
270 # File was already normalized.
271 RETURN=0
272 fi
273 ;;
274 esac
275 if [ "$RETURN" != "0" ]; then
276 # Put an error in the errors file. For various reasons we
277 # can't capture a copy of the program's output but we can
278 # log what we attempted to execute and the error code
279 # returned by the program.
280 if [ "$BLURB" ]; then
281 TWEAK="$BLURB: "
282 fi
283 echo "${TWEAK}returned code $RETURN: $@" >> "$ABCDETEMPDIR/errors"
284 return $RETURN # Do not pass go, do not update the status file
285 fi
286 if [ "$BLURB" ]; then
287 echo $BLURB >> "$ABCDETEMPDIR/status"
288 fi
289 }
290
291 # relpath() and slash() are Copyright (c) 1999 Stuart Ballard and
292 # distributed under the terms of the GNU GPL v2 or later, at your option
293
294 # Function to determine if a word contains a slash.
295 slash ()
296 {
297 case "$1" in
298 */*) return 0;;
299 *) return 1;;
300 esac
301 }
302
303 # Function to give the relative path from one file to another.
304 # Usage: relpath fromfile tofile
305 # eg relpath music/Artist/Album.m3u music/Artist/Album/Song.mp3
306 # (the result would be Album/Song.mp3)
307 # Output is relative path to $2 from $1 on stdout
308
309 # This code has the following restrictions:
310 # Multiple ////s are not collapsed into single /s, with strange effects.
311 # Absolute paths and ../s are handled wrong in FR (but they work in TO)
312 # If FR is a directory it must have a trailing /
313
314 relpath ()
315 {
316 FR="$1"
317 TO="$2"
318
319 case "$TO" in
320 /*) ;; # No processing is needed for absolute paths
321 *)
322 # Loop through common prefixes, ignoring them.
323 while slash "$FR" && [ "$(echo "$FR" | cut -d/ -f1)" = "$(echo "$TO" | cut -d/ -f1)" ]
324 do
325 FR="$(echo "$FR" | cut -d/ -f2-)"
326 TO="$(echo "$TO" | cut -d/ -f2-)"
327 done
328 # Loop through directory portions left in FR, adding appropriate ../s.
329 while slash "$FR"
330 do
331 FR="$(echo "$FR" | cut -d/ -f2-)"
332 TO="../$TO"
333 done
334 ;;
335 esac
336
337 echo $TO
338 }
339
340 new_checkexec ()
341 {
342 if [ ! "$@" = "" ]; then
343 # Cut off any command-line option we added in
344 X=$(echo $@ | cut -d' ' -f2)
345 if [ "$(which $X)" = "" ]; then
346 return 1
347 elif [ ! -x $(which $X) ]; then
348 return 2
349 fi
350 fi
351 return 0
352 }
353
354 checkexec ()
355 {
356 if [ ! "$@" = "" ]; then
357 # Cut off any command-line option we added in
358 X=$(echo $@ | cut -d' ' -f2)
359 # Test for built-in abcde.function
360 [ "$X" != "${X#abcde.}" ] && type $X >/dev/null 2>&1 && return
361 if [ "$(which $X)" = "" ]; then
362 log error "$X is not in your path." >&2
363 log info "Define the full path to the executable if it exists on your system." >&2
364 if [ -e /etc/debian_release ] ; then
365 case $X in
366 oggenc) MISSING_PACKAGE=vorbis-tools ;;
367 lame|flac) MISSING_PACKAGE=$X ;;
368 esac
369 log info "Hint: apt-get install $MISSING_PACKAGE" >&2
370 fi
371 exit 1
372 elif [ ! -x "$(which $X)" ]; then
373 log error "$X is not executable." >&2
374 exit 1
375 fi
376 fi
377 }
378
379 # diffentries <filename> <max_value> <entry1>,<entry2>
380 # max_value: the range of entries goes from 1 to <max_value>
381 diffentries ()
382 {
383 FILENAME=$1
384 shift
385 local CDDBDIFFCHOICES=$1
386 shift
387 local CDDBDIFFCHOICE="$@"
388 if [ ! X"$DIFF" = "X" ]; then
389 PARSECHOICE1=$(echo $CDDBDIFFCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
390 PARSECHOICE2=$(echo $CDDBDIFFCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
391 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
392 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
393 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
394 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
395 else
396 # We parse the 2 choices to diff, store them in temporary files and diff them.
397 for PARSECHOICE in $(echo $CDDBDIFFCHOICE | tr , \ ); do
398 do_cddbparse "$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
399 done
400 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
401 $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
402 if [ $(cat "$ABCDETEMPDIR/$FILENAME.diff" | wc -l) -ge 24 ]; then
403 page "$ABCDETEMPDIR/$FILENAME.diff"
404 else
405 cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
406 fi
407 fi
408 else
409 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
410 fi
411 }
412
413 # getcddbinfo
414 # Finds an specific field from cddbinfo
415 getcddbinfo()
416 {
417 case $1 in
418 TRACKNAME1)
419 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
420 ;;
421 TRACKNAME)
422 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
423 ;;
424 TRACK-INFO)
425 grep ^EXTT$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\\n/\n/g'
426 ;;
427 esac
428 }
429
430 # gettracknum
431 # Get the track number we are going to use for different actions
432 gettracknum()
433 {
434 if [ -n "$STARTTRACKNUMBER" ] ; then
435 # Get the trackpadding from the current track
436 CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
437 TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
438 else
439 TRACKNUM=${UTRACKNUM}
440 fi
441 }
442
443 # makeids
444 #
445 # Calculate cddb disc ids without requiring specialized helper programs.
446 # largely copied from cd-discid and musicbrainz examples. some of the steps
447 # don't make sense, but they're necessary to match the ids generated by other
448 # programs.
449 #
450 ## FIXME ## Right now, we get 2 frames more than with cue2discid ??
451 # data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
452 # processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
453 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
454 # data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
455 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
456 #
457 # Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
458 makeids ()
459 {
460 if [ X"$LEADOUT" = "X" ]; then
461 log warning "Error trying to calculate disc ids without lead-out information."
462 exit 1
463 fi
464
465 # default to a two second lead-in
466 IDMAGICNUM=150
467 LEADIN=${LEADIN:=150}
468
469 # number of cdframes per second
470 CDFRAMES=75
471
472 # reset cddb checksum for cddb disc-id calululation
473 CDDBCKSUM=0
474
475 COOKEDOFFSETS=""
476 for OFFSET in $(echo $OFFSETS)
477 do
478 COOKEDOFFSETS="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
479
480 OFFSETTIME=$(( ($OFFSET + $LEADIN) / $CDFRAMES ))
481 while [ $OFFSETTIME -gt 0 ]; do
482 CDDBCKSUM=$(($CDDBCKSUM + $OFFSETTIME % 10))
483 OFFSETTIME=$(($OFFSETTIME / 10))
484 done
485
486 done
487
488 COOKEDOFFSETS="${COOKEDOFFSETS:1}" # eat the leading space
489
490 PREGAP=$(($(echo $OFFSETS | cut -f1 -d' ')))
491 TOTALTIME=$(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
492
493 case "$CDDBMETHOD" in
494 cddb)
495 printf -v DISCID "%08lx" $(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
496 ;;
497 musicbrainz)
498 # FIXME: don't assume the first track is 1
499 echo "dasd: 1 $TRACKS $LEADIN $LEADOUT $OFFSETS "
500 DISCID=$($MUSICBRAINZ --command calcid --discinfo 1 $TRACKS $LEADIN $LEADOUT $OFFSETS)
501 ;;
502 esac
503
504 TRACKINFO="${DISCID} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
505 }
506
507 do_replaygain()
508 {
509 if checkstatus replaygain; then :; else
510 run_command "" echo "Adding replaygain information..."
511 for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
512 do
513 case $TMPOUTPUT in
514 vorbis|ogg)
515 OUTPUT=$OGGOUTPUTCONTAINER
516 ;;
517 flac)
518 OUTPUT=$FLACOUTPUTCONTAINER
519 ;;
520 *)
521 OUTPUT=$TMPOUTPUT
522 ;;
523 esac
524 OUTPUTFILES=""
525 REPLAYINDEX=0
526 for UTRACKNUM in $TRACKQUEUE
527 do
528 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
529 getcddbinfo TRACKNAME
530 splitvarious
531 TRACKFILE="$(mungefilename "$TRACKNAME")"
532 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
533 ALBUMFILE="$(mungefilename "$DALBUM")"
534 GENRE="$(mungegenre "$GENRE")"
535 YEAR=${CDYEAR:-$CDYEAR}
536 gettracknum
537 if [ "$ONETRACK" = "y" ]; then
538 if [ "$VARIOUSARTISTS" = "y" ]; then
539 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
540 else
541 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
542 fi
543 else
544 if [ "$VARIOUSARTISTS" = "y" ]; then
545 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
546 else
547 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
548 fi
549 fi
550 OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
551 (( REPLAYINDEX = $REPLAYINDEX + 1 ))
552 done
553 case "$OUTPUT" in
554 flac)
555 run_command replaygain-flac nice $ENCNICE $METAFLAC $FLACGAINOPTS "${OUTPUTFILES[@]}"
556 #run_command replaygain-flac true
557 ;;
558 vorbis|ogg)
559 run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN $VORBISGAINOPTS "${OUTPUTFILES[@]}"
560 ;;
561 mp3)
562 run_command replaygain-mp3 nice $ENCNICE $MP3GAIN $MP3GAINOPTS "${OUTPUTFILES[@]}"
563 ;;
564 mpc)
565 run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
566 ;;
567 *);;
568 esac
569 done
570 if checkerrors "replaygain-.{3,6}"; then :; else
571 run_command replaygain true
572 fi
573 fi
574 }
575
576 # This code splits the a Various Artist track name from one of the following
577 # forms:
578 #
579 # forward: Artist / Track
580 # forward-dash: Artist - Track
581 # reverse: Track / Artist
582 # reverse-dash: Track - Artist
583 # colon: Artist: Track
584 # trailing-paren: Artist (Track)
585 #
586 # variables used:
587 # VARIOUSARTISTS, VARIOUSARTISTSTYLE, TRACKNAME, TRACKARTIST
588 splitvarious ()
589 {
590 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
591 case "$VARIOUSARTISTSTYLE" in
592 forward)
593 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
594 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
595 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
596 ;;
597 forward-dash)
598 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
599 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
600 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
601 ;;
602 reverse)
603 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
604 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
605 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
606 ;;
607 reverse-dash)
608 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
609 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
610 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
611 ;;
612 colon)
613 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
614 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
615 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
616 ;;
617 trailing-paren)
618 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
619 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
620 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
621 ;;
622 esac
623 elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
624 TRACKARTIST="Various"
625 else
626 TRACKARTIST="$DARTIST"
627 fi
628 }
629
630 do_getgenreid () {
631 local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
632 local id=""
633 case ${genre} in
634 "blues") id=0 ;;
635 "classic rock") id=1 ;;
636 "country") id=2 ;;
637 "dance") id=3 ;;
638 "disco") id=4 ;;
639 "funk") id=5 ;;
640 "grunge") id=6 ;;
641 "hip-hop") id=7 ;;
642 "jazz") id=8 ;;
643 "metal") id=9 ;;
644 "new age") id=10 ;;
645 "oldies") id=11 ;;
646 "other") id=12 ;;
647 "pop") id=13 ;;
648 "r&b") id=14 ;;
649 "rap") id=15 ;;
650 "reggae") id=16 ;;
651 "rock") id=17 ;;
652 "techno") id=18 ;;
653 "industrial") id=19 ;;
654 "alternative") id=20 ;;
655 "ska") id=21 ;;
656 "death metal") id=22 ;;
657 "pranks") id=23 ;;
658 "soundtrack") id=24 ;;
659 "euro-techno") id=25 ;;
660 "ambient") id=26 ;;
661 "trip-hop") id=27 ;;
662 "vocal") id=28 ;;
663 "jazz+funk") id=29 ;;
664 "fusion") id=30 ;;
665 "trance") id=31 ;;
666 "classical") id=32 ;;
667 "instrumental") id=33 ;;
668 "acid") id=34 ;;
669 "house") id=35 ;;
670 "game") id=36 ;;
671 "sound clip") id=37 ;;
672 "gospel") id=38 ;;
673 "noise") id=39 ;;
674 "alt. rock") id=40 ;;
675 "bass") id=41 ;;
676 "soul") id=42 ;;
677 "punk") id=43 ;;
678 "space") id=44 ;;
679 "meditative") id=45 ;;
680 "instrum. pop") id=46 ;;
681 "instrum. rock") id=47 ;;
682 "ethnic") id=48 ;;
683 "gothic") id=49 ;;
684 "darkwave") id=50 ;;
685 "techno-indust.") id=51 ;;
686 "electronic") id=52 ;;
687 "pop-folk") id=53 ;;
688 "eurodance") id=54 ;;
689 "dream") id=55 ;;
690 "southern rock") id=56 ;;
691 "comedy") id=57 ;;
692 "cult") id=58 ;;
693 "gangsta") id=59 ;;
694 "top 40") id=60 ;;
695 "christian rap") id=61 ;;
696 "pop/funk"|"pop / funk") id=62 ;;
697 "jungle") id=63 ;;
698 "native american") id=64 ;;
699 "cabaret") id=65 ;;
700 "new wave") id=66 ;;
701 "psychadelic") id=67 ;;
702 "rave") id=68 ;;
703 "showtunes") id=69 ;;
704 "trailer") id=70 ;;
705 "lo-fi") id=71 ;;
706 "tribal") id=72 ;;
707 "acid punk") id=73 ;;
708 "acid jazz") id=74 ;;
709 "polka") id=75 ;;
710 "retro") id=76 ;;
711 "musical") id=77 ;;
712 "rock & roll") id=78 ;;
713 "hard rock") id=79 ;;
714 "folk") id=80 ;;
715 "folk/rock") id=81 ;;
716 "national folk") id=82 ;;
717 "swing") id=83 ;;
718 "fusion") id=84 ;;
719 "bebob") id=85 ;;
720 "latin") id=86 ;;
721 "revival") id=87 ;;
722 "celtic") id=88 ;;
723 "bluegrass") id=89 ;;
724 "avantgarde") id=90 ;;
725 "gothic rock") id=91 ;;
726 "progress. rock") id=92 ;;
727 "psychadel. rock") id=93 ;;
728 "symphonic rock") id=94 ;;
729 "slow rock") id=95 ;;
730 "big band") id=96 ;;
731 "chorus") id=97 ;;
732 "easy listening") id=98 ;;
733 "acoustic") id=99 ;;
734 "humour") id=100 ;;
735 "speech") id=101 ;;
736 "chanson") id=102 ;;
737 "opera") id=103 ;;
738 "chamber music") id=104 ;;
739 "sonata") id=105 ;;
740 "symphony") id=106 ;;
741 "booty bass") id=107 ;;
742 "primus") id=108 ;;
743 "porn groove") id=109 ;;
744 "satire") id=110 ;;
745 "slow jam") id=111 ;;
746 "club") id=112 ;;
747 "tango") id=113 ;;
748 "samba") id=114 ;;
749 "folklore") id=115 ;;
750 "ballad") id=116 ;;
751 "power ballad") id=117 ;;
752 "rhythmic soul") id=118 ;;
753 "freestyle") id=119 ;;
754 "duet") id=120 ;;
755 "punk rock") id=121 ;;
756 "drum solo") id=122 ;;
757 "a capella") id=123 ;;
758 "euro-house") id=124 ;;
759 "dance hall") id=125 ;;
760 "goa") id=126 ;;
761 "drum & bass") id=127 ;;
762 "club-house") id=128 ;;
763 "hardcore") id=129 ;;
764 "terror") id=130 ;;
765 "indie") id=131 ;;
766 "britpop") id=132 ;;
767 "negerpunk") id=133 ;;
768 "polsk punk") id=134 ;;
769 "beat") id=135 ;;
770 "christian gangsta rap") id=136 ;;
771 "heavy metal") id=137 ;;
772 "black metal") id=138 ;;
773 "crossover") id=139 ;;
774 "contemporary christian")id=140 ;;
775 "christian rock") id=141 ;;
776 "merengue") id=142 ;;
777 "salsa") id=143 ;;
778 "thrash metal") id=144 ;;
779 "anime") id=145 ;;
780 "jpop") id=146 ;;
781 "synthpop") id=147 ;;
782 "rock/pop"|"rock / pop") id=148 ;;
783 *) return 1 ;;
784 esac
785 echo ${id}
786 return 0
787 }
788
789 # do_tag [tracknumber]
790 # id3 tags a filename
791 # variables used:
792 # TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC, ATOMICPARSLEY
793 # COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE
794 do_tag ()
795 {
796 COMMENTOUTPUT="$(eval echo ${COMMENT})"
797 if [ -z "$COMMENTOUTPUT" ]; then
798 COMMENTOUTPUT="$(getcddbinfo TRACK-INFO)"
799 fi
800 if [ "$CDDBMETHOD" = "cddb" ]; then
801 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
802 fi
803 run_command '' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
804 # If we want to start the tracks with a given number, we need to modify the
805 # TRACKNUM value before evaluation
806 if [ -n "$STARTTRACKNUMBERTAG" ] ; then
807 gettracknum
808 fi
809 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
810 do
811 case "$OUTPUT" in
812 mp3)
813 # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
814 GENREID=$(do_getgenreid "${CDGENRE}")
815 # Set TPE2 in case we have a Various Artists rip.
816 TPE2=""
817 if [ "$VARIOUSARTISTS" = "y" ]; then
818 TPE2="Various"
819 fi
820
821 case "$ID3SYNTAX" in
822 id3);;
823 eyed3)
824 # FIXME # track numbers in mp3 come with 1/10, so we cannot
825 # happily substitute them with $TRACKNUM
826 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $TAGGER $TAGGEROPTS \
827 --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
828 -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
829 -G "$GENREID" -n "${TRACKNUM:-$1}" \
830 "${TRACKNUM:+-N $TRACKS}" \
831 "${ENCODING:+--set-encoding=$ENCODING}" \
832 "${TPE2:+--set-user-text-frame=TPE2:$TPE2}" \
833 "$ABCDETEMPDIR/track$1.$OUTPUT"
834 ;;
835 # FIXME # Still not activated...
836 id3ed)
837 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
838 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
839 -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" \
840 -y "$CDYEAR" -g "$GENREID" -k "${TRACKNUM:-$1}" \
841 "$ABCDETEMPDIR/track$1.$OUTPUT"
842 ;;
843 *)
844 # FIXME # track numbers in mp3 come with 1/10, so we cannot
845 # happily substitute them with $TRACKNUM
846 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
847 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
848 -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" \
849 -y "$CDYEAR" -g "$GENREID" \
850 -T "${TRACKNUM:-$1}/$TRACKS" \
851 ${TPE2:+--TPE2 "$TPE2"} \
852 "$ABCDETEMPDIR/track$1.$OUTPUT"
853 ;;
854 esac
855 ;;
856 vorbis|ogg)
857 case "$OGGENCODERSYNTAX" in
858 vorbize|oggenc)
859 # vorbiscomment can't do in-place modification, mv the file first
860 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
861 mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
862 fi
863 (
864 # These are from
865 # http://www.xiph.org/ogg/vorbis/doc/v-comment.html
866
867 echo ARTIST="$TRACKARTIST"
868 echo ALBUM="$DALBUM"
869 echo TITLE="$TRACKNAME"
870 if [ -n "$CDYEAR" ]; then
871 echo DATE="$CDYEAR"
872 fi
873 if [ -n "$CDGENRE" ]; then
874 echo GENRE="$CDGENRE"
875 fi
876 echo TRACKNUMBER=${TRACKNUM:-$1}
877 if [ -n "$DISCNUMBER" ]; then
878 echo DISCNUMBER="$DISCNUMBER"
879 fi
880 echo CDDB=$CDDBDISCID
881 if [ "$(eval echo ${COMMENT})" != "" ]; then
882 case "$COMMENTOUTPUT" in
883 *=*) echo "$COMMENTOUTPUT";;
884 *) echo COMMENT="$COMMENTOUTPUT";;
885 esac
886 fi
887 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
888 $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
889 "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
890 # Doublecheck that the commented file was created
891 # successfully before wiping the original
892 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
893 rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
894 else
895 mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
896 fi
897 ;;
898 esac
899 ;;
900 flac)
901 (
902 echo ARTIST="$TRACKARTIST"
903 echo ALBUM="$DALBUM"
904 echo TITLE="$TRACKNAME"
905 if [ -n "$CDYEAR" ]; then
906 echo DATE="$CDYEAR"
907 fi
908 if [ -n "$CDGENRE" ]; then
909 echo GENRE="$CDGENRE"
910 fi
911 echo TRACKNUMBER="${TRACKNUM:-$1}"
912 if [ -n "$DISCNUMBER" ]; then
913 echo DISCNUMBER="$DISCNUMBER"
914 fi
915 echo CDDB="$CDDBDISCID"
916 if [ "$(eval echo ${COMMENT})" != "" ]; then
917 case "$COMMENTOUTPUT" in
918 *=*) echo "$COMMENTOUTPUT";;
919 *) echo COMMENT="$COMMENTOUTPUT";;
920 esac
921 fi
922 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
923 ;;
924 spx)
925 run_command tagtrack-$OUTPUT-$1 true
926 ;;
927 mpc)
928 run_command tagtrack-$OUTPUT-$1 true
929 ;;
930 m4a)
931 # Use a temp-file of our choice. --overWrite seems to
932 # case core dumps with AtomicParsley 0.9.0
933 ATOMICTEMPFILE="$ABCDETEMPDIR/track$1.m4a-atomic"
934
935 VARIOUSBOOL="false"
936 if [ "$VARIOUSARTISTS" = "y" ]; then
937 VARIOUSBOOL="true"
938 fi
939
940 #It has to be command file opts for AtomicParsley
941 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $ATOMICPARSLEY $ABCDETEMPDIR/track$1.m4a --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --tracknum ${TRACKNUM:-$1} --year "$CDYEAR" --genre "$CDGENRE" --compilation $VARIOUSBOOL --comment "$COMMENTOUTPUT" --output $ATOMICTEMPFILE
942 if [ -f $ATOMICTEMPFILE ]; then
943 mv "$ATOMICTEMPFILE" "$ABCDETEMPDIR/track$1.m4a"
944 fi
945 ;;
946 wav)
947 run_command tagtrack-$OUTPUT-$1 true
948 ;;
949 esac
950 done
951 if checkerrors "tagtrack-(.{3,6})-$1"; then :; else
952 run_command tagtrack-$1 true
953 fi
954
955 }
956
957 # do_nogap_encode
958 # variables used:
959 # OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
960 do_nogap_encode ()
961 {
962 # The commands here don't go through run_command because they're never
963 # supposed to be silenced
964 echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
965 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
966 do
967 case "$OUTPUT" in
968 mp3)
969 case "$MP3ENCODERSYNTAX" in
970 lame|toolame)
971 (
972 cd "$ABCDETEMPDIR"
973 TRACKFILES=
974 for UTRACKNUM in $TRACKQUEUE
975 do
976 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
977 done
978 nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
979 RETURN=$?
980 if [ "$RETURN" != "0" ]; then
981 echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
982 else
983 for UTRACKNUM in $TRACKQUEUE
984 do
985 run_command encodetrack-$OUTPUT-$UTRACKNUM true
986 #run_command encodetrack-$UTRACKNUM true
987 done
988 fi
989 )
990 ;;
991 esac
992 ;;
993 esac
994 done
995 if checkerrors "nogap-encode"; then :; else
996 if [ ! "$KEEPWAVS" = "y" ] ; then
997 if [ ! "$KEEPWAVS" = "move" ] ; then
998 rm -f "$IN"
999 fi
1000 fi
1001 fi
1002 # Other encoders fall through to normal encoding as the tracks have not
1003 # been entered in the status file.
1004 }
1005
1006 # do_encode [tracknumber] [hostname]
1007 # If no hostname is specified, encode locally
1008 # variables used:
1009 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1010 do_encode ()
1011 {
1012 if [ "$USEPIPES" = "y" ]; then
1013 case "$OUTPUT" in
1014 mp3)
1015 TEMPARG="PIPE_$MP3ENCODERSYNTAX"
1016 ;;
1017 vorbis|ogg)
1018 TEMPARG="PIPE_$OGGENCODERSYNTAX"
1019 ;;
1020 flac)
1021 TEMPARG="PIPE_$FLACENCODERSYNTAX"
1022 ;;
1023 spx)
1024 TEMPARG="PIPE_$SPEEXENCODER"
1025 ;;
1026 mpc)
1027 TEMPARG="PIPE_$MPPENCODER"
1028 ;;
1029 m4a)
1030 TEMPARG="PIPE_$MPPENCODER"
1031 ;;
1032 esac
1033 IN="$( eval echo "\$$TEMPARG" )"
1034 else
1035 IN="$ABCDETEMPDIR/track$1.wav"
1036 case "$OUTPUT" in
1037 mp3)
1038 case "$MP3ENCODERSYNTAX" in
1039 # FIXME # check if mp3enc needs -if for pipes
1040 # FIXME # I have not been able to find a working mp3enc binary
1041 mp3enc)
1042 FILEARG="-if $IN"
1043 ;;
1044 *)
1045 FILEARG="$IN"
1046 ;;
1047 esac
1048 ;;
1049 *)
1050 FILEARG="$IN"
1051 ;;
1052 esac
1053 fi
1054 # We need IN to proceed, if we are not using pipes.
1055 if [ -s "$IN" -o X"$USEPIPES" = "Xy" ] ; then
1056 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1057 do
1058 case "$TMPOUTPUT" in
1059 vorbis|ogg)
1060 OUTPUT=$OGGOUTPUTCONTAINER
1061 ;;
1062 flac)
1063 OUTPUT=$FLACOUTPUTCONTAINER
1064 ;;
1065 *)
1066 OUTPUT=$TMPOUTPUT
1067 ;;
1068 esac
1069 OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1070 if [ "$NOGAP" = "y" ] && checkstatus encodetrack-$OUTPUT-$1 ; then
1071 continue
1072 fi
1073 if [ X"$USEPIPES" = "Xy" ]; then
1074 RUN_COMMAND=""
1075 # We need a way to store the creation of the files when using PIPES
1076 RUN_COMMAND_PIPES="run_command encodetrack-$OUTPUT-$1 true"
1077 # When pipping it does not make sense to have a higher nice for
1078 # reading than for encoding, since it will be hold by the
1079 # encoding process. Setting an effective nice, to calm down a
1080 # bit the reading process.
1081 EFFECTIVE_NICE=$READNICE
1082 else
1083 run_command '' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
1084 RUN_COMMAND="run_command encodetrack-$OUTPUT-$1"
1085 EFFECTIVE_NICE=$ENCNICE
1086 fi
1087 case "$OUTPUT" in
1088 mp3)
1089 case "$2" in
1090 %local*%)
1091 case "$MP3ENCODERSYNTAX" in
1092 lame|toolame|gogo) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
1093 bladeenc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
1094 l3enc|xingmp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
1095 # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
1096 mp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
1097 esac
1098 ;;
1099 *)
1100 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1101 ;;
1102 esac
1103 ;;
1104 vorbis|ogg)
1105 case "$2" in
1106 %local*%)
1107 case "$OGGENCODERSYNTAX" in
1108 vorbize) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
1109 oggenc) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
1110 esac
1111 ;;
1112 *)
1113 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1114 ;;
1115 esac
1116 ;;
1117 flac)
1118 case "$2" in
1119 %local*%)
1120 case "$FLACENCODERSYNTAX" in
1121 flac) $RUN_COMMAND nice $EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
1122 esac
1123 ;;
1124 *)
1125 vecho -n "DISTMP3:"
1126 vecho "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
1127 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
1128 ;;
1129 esac
1130 ;;
1131 spx)
1132 if [ "$(eval echo ${COMMENT})" != "" ]; then
1133 case "$COMMENT" in
1134 *=*) ;;
1135 *) COMMENT="COMMENT=$COMMENT" ;;
1136 esac
1137 fi
1138 # Tag the file at encode time, as it can't be done after encoding.
1139 if [ "$DOTAG" = "y" ]; then
1140 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" ${COMMENT:+--comment "$COMMENT"} "$IN" "$OUT"
1141 else
1142 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
1143 fi
1144 ;;
1145 mpc)
1146 # MPP/MP+(Musepack) format (.mpc) is done locally, with inline
1147 # tagging.
1148 # I tried compiling the mppenc from corecodecs.org and got some
1149 # errors, so I have not tried it myself.
1150 ## FIXME ## Needs some cleanup to determine if an empty tag sent
1151 ## FIXME ## to the encoder ends up empty.
1152 $RUN_COMMAND nice $EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
1153 ;;
1154 m4a)
1155 # Tag the file at encode time, as it can't be done after encoding.
1156 if [ "$DOTAG" = "y" ]; then
1157 $RUN_COMMAND nice $EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
1158
1159 else
1160 $RUN_COMMAND nice $ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
1161 fi
1162 ;;
1163 wav)
1164 # In case of wav output we need nothing. Just keep the wavs.
1165 ;;
1166 esac
1167 $RUN_COMMAND_PIPES
1168 done
1169 # Only remove .wav if the encoding succeeded
1170 if checkerrors "encodetrack-(.{3,6})-$1"; then :; else
1171 run_command encodetrack-$1 true
1172 if [ ! "$KEEPWAVS" = "y" ] ; then
1173 if [ ! "$KEEPWAVS" = "move" ] ; then
1174 rm -f "$IN"
1175 fi
1176 fi
1177 fi
1178 else
1179 run_command "" echo "HEH! The file we were about to encode disappeared:"
1180 run_command "" echo ">> $IN"
1181 run_command encodetrack-$1 false
1182 fi
1183 }
1184
1185 # do_preprocess [tracknumber]
1186 # variables used:
1187 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1188 #do_preprocess ()
1189 #{
1190 # IN="$ABCDETEMPDIR/track$1.wav"
1191 # # We need IN to proceed.
1192 # if [ -s "$IN" ] ; then
1193 # for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1194 # do
1195 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1196 # run_command '' echo "Pre-processing track $1 of $TRACKS..."
1197 # case "$POSTPROCESSFORMAT" in
1198 # all|wav*)
1199 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $WAV_PRE $IF $OF ;;
1200 # mp3)
1201 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $MP3_PRE $IF $OF ;;
1202 # ogg)
1203 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $OGG_PRE $IF $OF ;;
1204 # flac)
1205 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $FLAC_PRE $IF $OF ;;
1206 # spx)
1207 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $SPX_PRE $IF $OF ;;
1208 # esac
1209 # done
1210 # # Only remove .wav if the encoding succeeded
1211 # if checkerrors "preprocess-(.{3,4})-$1"; then
1212 # run_command preprocess-$1 false
1213 # else
1214 # run_command preprocess-$1 true
1215 # fi
1216 # else
1217 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1218 # echo "HEH! The file we were about to pre-process disappeared:"
1219 # echo ">> $IN"
1220 # fi
1221 # run_command preprocess-$1 false
1222 # fi
1223 #}
1224
1225
1226 # do_postprocess [tracknumber]
1227 # variables used:
1228 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1229 #do_postprocess ()
1230 #{
1231 # for POSTPROCESSFORMAT in $(echo $POSTPROCESSFORMATS | tr , \ )
1232 # do
1233 # IN="$ABCDETEMPDIR/track$1.$POSTPROCESSFORMAT"
1234 # # We need IN to proceed.
1235 # if [ -s "$IN" ] ; then
1236 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1237 # run_command '' echo "Post-processing track $1 of $TRACKS..."
1238 # case "$POSTPROCESSFORMAT" in
1239 # mp3)
1240 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $MP3_POST $IF $OF ;;
1241 # ogg)
1242 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $OGG_POST $IF $OF ;;
1243 # flac)
1244 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $FLAC_POST $IF $OF ;;
1245 # spx)
1246 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
1247 # esac
1248 # # Only remove .wav if the encoding succeeded
1249 # if checkerrors "postprocess-(.{3,4})-$1"; then
1250 # run_command postprocess-$1 false
1251 # else
1252 # run_command postprocess-$1 true
1253 # fi
1254 # else
1255 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1256 # echo "HEH! The file we were about to post-process disappeared:"
1257 # echo ">> $IN"
1258 # fi
1259 # run_command postprocess-$1 false
1260 # fi
1261 # done
1262 #}
1263
1264 # do_single_gain
1265 # variables used:
1266 # FIXME #
1267 do_single_gain ()
1268 {
1269 :
1270 }
1271
1272 # do_batch_gain
1273 # variables used:
1274 # MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
1275 # FIXME #
1276 do_batch_gain ()
1277 {
1278 # The commands here don't go through run_command because they're never supposed to be silenced
1279 echo "Batch analizing gain in tracks: $TRACKQUEUE"
1280 (
1281 cd "$ABCDETEMPDIR"
1282 BLURB=
1283 TRACKFILES=
1284 for UTRACKNUM in $TRACKQUEUE
1285 do
1286 MP3FILES="$TRACKFILES track$UTRACKNUM.mp3"
1287 done
1288 # FIXME # Hard-coded batch option!
1289 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1290 RETURN=$?
1291 if [ "$RETURN" != "0" ]; then
1292 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1293 else
1294 for UTRACKNUM in $TRACKQUEUE
1295 do
1296 echo normalizetrack-$UTRACKNUM >> status
1297 done
1298 fi
1299 )
1300 }
1301
1302 # do_batch_normalize
1303 # variables used:
1304 # NORMALIZER, NORMALIZEROPTS
1305 do_batch_normalize ()
1306 {
1307 # The commands here don't go through run_command because they're never supposed to be silenced
1308 echo "Batch normalizing tracks: $TRACKQUEUE"
1309 (
1310 cd "$ABCDETEMPDIR"
1311 BLURB=
1312 TRACKFILES=
1313 for UTRACKNUM in $TRACKQUEUE
1314 do
1315 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
1316 done
1317 # XXX: Hard-coded batch option!
1318 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1319 RETURN=$?
1320 if [ "$RETURN" != "0" ]; then
1321 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1322 else
1323 for UTRACKNUM in $TRACKQUEUE
1324 do
1325 echo normalizetrack-$UTRACKNUM >> status
1326 done
1327 fi
1328 )
1329 }
1330
1331 # do_normalize [tracknumber]
1332 # variables used:
1333 # TRACKS, TRACKNAME, NORMALIZER, NORMALIZEROPTS
1334 do_normalize ()
1335 {
1336 IN="$ABCDETEMPDIR/track$1.wav"
1337 if [ -e "$IN" ] ; then
1338 run_command '' echo "Normalizing track $1 of $TRACKS: $TRACKNAME..."
1339 run_command normalizetrack-$1 $NORMALIZER $NORMALIZEROPTS "$IN"
1340 else
1341 if [ "$(checkstatus encode-output)" = "loud" ]; then
1342 echo "HEH! The file we were about to normalize disappeared:"
1343 echo ">> $IN"
1344 fi
1345 run_command normalizetrack-$1 false "File $IN was not found"
1346 fi
1347 }
1348
1349 # do_move [tracknumber]
1350 # Deduces the outfile from environment variables
1351 # Creates directory if necessary
1352 # variables used:
1353 # TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
1354 do_move ()
1355 {
1356 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1357 do
1358 # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
1359 # defined the OUTPUTFILE:
1360 OUTPUT="$TMPOUTPUT"
1361
1362 # Create ALBUMFILE, ARTISTFILE, TRACKFILE
1363 # Munge filenames as follows:
1364 # ' ' -> '_'
1365 # '/' -> '_'
1366 # ''' -> ''
1367 # '?' -> ''
1368 # Eat control characters
1369 ALBUMFILE="$(mungefilename "$DALBUM")"
1370 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1371 TRACKFILE="$(mungefilename "$TRACKNAME")"
1372 GENRE="$(mungegenre "$GENRE")"
1373 YEAR=${CDYEAR:-$CDYEAR}
1374 # If we want to start the tracks with a given number, we need to modify
1375 # the TRACKNUM value before evaluation
1376 gettracknum
1377 # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
1378 # ARTISTFILE, TRACKFILE, and TRACKNUM.
1379 if [ "$ONETRACK" = "y" ]; then
1380 if [ "$VARIOUSARTISTS" = "y" ]; then
1381 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
1382 else
1383 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
1384 fi
1385 else
1386 if [ "$VARIOUSARTISTS" = "y" ]; then
1387 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
1388 else
1389 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
1390 fi
1391 fi
1392 if checkerrors "tagtrack-$OUTPUT-$1"; then :; else
1393 # Once we know the specific output was successful, we can change
1394 # the OUTPUT to the value containing the container
1395 case $TMPOUTPUT in
1396 vorbis|ogg)
1397 OUTPUT=$OGGOUTPUTCONTAINER
1398 ;;
1399 flac)
1400 OUTPUT=$FLACOUTPUTCONTAINER
1401 ;;
1402 *)
1403 OUTPUT=$TMPOUTPUT
1404 ;;
1405 esac
1406 # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
1407 OUTPUTFILEDIR="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
1408 case $OUTPUT in
1409 wav)
1410 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1411 # FIXME # introduce warnings?
1412 :
1413 else
1414 # mkdir -p shouldn't return an error if the directory already exists
1415 mkdir -p "$OUTPUTFILEDIR"
1416 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1417 if checkstatus movetrack-output-$OUTPUT; then :; else
1418 run_command movetrack-output-$OUTPUT true
1419 fi
1420 fi
1421 ;;
1422 *)
1423 # mkdir -p shouldn't return an error if the directory already exists
1424 mkdir -p "$OUTPUTFILEDIR"
1425 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1426 if checkstatus movetrack-output-$OUTPUT; then :; else
1427 run_command movetrack-output-$OUTPUT true
1428 fi
1429 ;;
1430 esac
1431 # Lets move the cue file
1432 if CUEFILE=$(checkstatus cuefile) >/dev/null ; then
1433 if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
1434 if checkstatus movecue-$OUTPUT; then :; else
1435 # Silence the Copying output since it overlaps with encoding processes...
1436 #run_command '' vecho "Copying cue file to its destination directory..."
1437 if checkstatus onetrack >/dev/null ; then
1438 case $OUTPUT in
1439 wav)
1440 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1441 # We dont have the dir, since it was not created before.
1442 :
1443 else
1444 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1445 fi
1446 ;;
1447 # NOTE: Creating a cue file with the 3-char-extension files is to comply with
1448 # http://brianvictor.tripod.com/mp3cue.htm#details
1449 [a-z0-9][a-z0-9][a-z0-9])
1450 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1451 ;;
1452 *)
1453 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
1454 ;;
1455 esac
1456 else
1457 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
1458 fi
1459 echo movecue-$OUTPUT >> "$ABCDETEMPDIR/status"
1460 fi
1461 fi
1462 fi
1463 fi
1464 done
1465 }
1466
1467 # do_playlist
1468 # Create the playlist if wanted
1469 # Variables used:
1470 # PLAYLISTFORMAT, PLAYLISTDATAPREFIX, VAPLAYLISTFORMAT, VAPLAYLISTDATAPREFIX,
1471 # VARIOUSARTISTS, OUTPUTDIR
1472 do_playlist ()
1473 {
1474 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1475 do
1476 case $TMPOUTPUT in
1477 vorbis|ogg)
1478 OUTPUT=$OGGOUTPUTCONTAINER
1479 ;;
1480 flac)
1481 OUTPUT=$FLACOUTPUTCONTAINER
1482 ;;
1483 *)
1484 OUTPUT=$TMPOUTPUT
1485 ;;
1486 esac
1487 # Create a playlist file for the playlist data to go into.
1488 # We used to wipe it out if it existed. Now we request permision if interactive.
1489 for LASTTRACK in $TRACKQUEUE; do :; done
1490 ALBUMFILE="$(mungefilename "$DALBUM")"
1491 ARTISTFILE="$(mungefilename "$DARTIST")"
1492 GENRE="$(mungegenre "$GENRE")"
1493 YEAR=${CDYEAR:-$CDYEAR}
1494 if [ "$VARIOUSARTISTS" = "y" ] ; then
1495 PLAYLISTFILE="$(eval echo "$VAPLAYLISTFORMAT")"
1496 else
1497 PLAYLISTFILE="$(eval echo "$PLAYLISTFORMAT")"
1498 fi
1499 FINALPLAYLISTDIR="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
1500 mkdir -p "$FINALPLAYLISTDIR"
1501 if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
1502 echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
1503 if [ "$INTERACTIVE" = "y" ]; then
1504 while [ "$DONE" != "y" ]; do
1505 read ERASEPLAYLIST
1506 case $ERASEPLAYLIST in
1507 e|E|a|A|k|K) DONE=y ;;
1508 "") ERASEPLAYLIST=e ; DONE=y ;;
1509 *) ;;
1510 esac
1511 done
1512 else
1513 echo e >&2
1514 ERASEPLAYLIST=e
1515 fi
1516 # Once we erase the playlist, we use append to create the new one.
1517 [ "$ERASEPLAYLIST" = "e" -o "$ERASEPLAYLIST" = "E" ] && rm -f "$OUTPUTDIR/$PLAYLISTFILE" && ERASEPLAYLIST=a
1518 else
1519 # The playlist does not exist, so we can safelly use append to create the new list
1520 ERASEPLAYLIST=a
1521 fi
1522 if [ "$ERASEPLAYLIST" = "a" -o "$ERASEPLAYLIST" = "A" ]; then
1523 touch "$OUTPUTDIR/$PLAYLISTFILE"
1524 for UTRACKNUM in $TRACKQUEUE
1525 do
1526 # Shares some code with do_move since the filenames have to match
1527 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
1528 getcddbinfo TRACKNAME
1529 splitvarious
1530 TRACKFILE="$(mungefilename "$TRACKNAME")"
1531 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1532 ALBUMFILE="$(mungefilename "$DALBUM")"
1533 # If we want to start the tracks with a given number, we need to modify the
1534 # TRACKNUM value before evaluation
1535 gettracknum
1536 if [ "$VARIOUSARTISTS" = "y" ]; then
1537 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT\"")"
1538 else
1539 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT\"")"
1540 fi
1541 if [ "$VARIOUSARTISTS" = "y" ]; then
1542 if [ "$VAPLAYLISTDATAPREFIX" ] ; then
1543 echo ${VAPLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1544 else
1545 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1546 fi
1547 else
1548 if [ "$PLAYLISTDATAPREFIX" ]; then
1549 echo ${PLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1550 else
1551 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1552 fi
1553 fi
1554 done
1555 fi
1556 ## this will convert the playlist to have CRLF line-endings, if specified
1557 ## (some hardware players insist on CRLF endings)
1558 if [ "$DOSPLAYLIST" = "y" ]; then
1559 awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
1560 # mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
1561 cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" | sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
1562 fi
1563 echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
1564 done
1565 }
1566
1567 # abcde.cue2discid
1568 # This function reads a cuefile on stdin and writes an extended
1569 # cddb query on stdout. Any PREGAP for track 1 is properly
1570 # handled, although cue files embedded in FLAC files do not
1571 # appear to properly store the PREGAP setting. :(
1572 abcde.cue2discid () {
1573
1574 cddb_sum () {
1575 val=$1
1576 ret=0
1577 while [ $val -gt 0 ] ; do
1578 ret=$(( $ret + ( $val % 10) ))
1579 val=$(( $val / 10 ))
1580 done
1581 echo $ret
1582 }
1583
1584 msf2lba () {
1585 OIFS="$IFS"
1586 IFS=":"
1587 set -- $1
1588 IFS="$OIFS"
1589 local first second third
1590 first=$(expr ${1} + 0 )
1591 second=$(expr ${2} + 0 )
1592 third=$(expr ${3} + 0 )
1593
1594 echo $(( ((($first * 60) + $second) * 75) + $third ))
1595 }
1596
1597 OFFSET=150
1598 PREGAP=0
1599 LEADOUT=0
1600 LEADIN=88200
1601 i=0
1602 N=0
1603
1604 while read line ; do
1605 set -- $line
1606 case "$1" in
1607 TRACK) i=$(( i + 1 ))
1608 ;;
1609 INDEX) if [ "$2" -eq 1 ] ; then
1610 LBA=$(msf2lba $3)
1611 START=$(( $LBA + $PREGAP + $OFFSET ))
1612 eval TRACK$i=$START
1613 X=$(cddb_sum $(( $START / 75 )) )
1614 N=$(( $N + $X ))
1615 fi
1616 ;;
1617 PREGAP) PREGAP=$(msf2lba $2)
1618 ;;
1619 REM) case "$2" in
1620 FLAC__lead-out)
1621 LEADOUT=$(( $4 / 588 ))
1622 ;;
1623 FLAC__lead-in)
1624 LEADIN=$(( $3 / 588 ))
1625 ;;
1626 esac
1627 ;;
1628 esac
1629
1630 done
1631
1632 TRACKS=$i
1633 LEADOUT=$(( $LEADOUT + $LEADIN ))
1634
1635 LENGTH=$(( $LEADOUT/75 - $TRACK1/75 ))
1636 DISCID=$(( ( $N % 255 ) * 2**24 | $LENGTH * 2**8 | $TRACKS ))
1637 printf "%08x %i" $DISCID $TRACKS
1638
1639 j=1
1640 while [ $j -le $TRACKS ] ; do
1641 eval echo -n "\" \$TRACK$j\""
1642 j=$((j+1))
1643 done
1644 echo " $(( $LEADOUT / 75 ))"
1645 }
1646
1647 # abcde.mkcue
1648 # abcde.mkcue [--wholedisk]
1649 # This creates a cuefile directly from the extended discid information
1650 # The --wholedisk option controls whether we're ripping data from the
1651 # start of track one or from the start of the disk (usually, but not
1652 # always the same thing!)
1653 #
1654 # Track one leadin/pregap (if any) handeling:
1655 # --wholedisk specified:
1656 # TRACK 01 AUDIO
1657 # INDEX 00 00:00:00
1658 # INDEX 01 <pregap value>
1659 # Remaining track index values unchanged from disc TOC
1660 #
1661 # --wholedisk not specified
1662 # TRACK 01 AUDIO
1663 # PREGAP <pregap value>
1664 # INDEX 01 00:00:00
1665 # Remaining track index values offset by <pregap value>
1666 #
1667 # Variables used:
1668 # TRACKINFO
1669 abcde.mkcue () {
1670
1671 echomsf () {
1672 printf "$1%02i:%02i:%02i\n" $(($2/4500)) $((($2/75)%60)) $(($2%75))
1673 }
1674
1675 local MODE DISCID TRACKS
1676 local i OFFSET LBA
1677 local CUEWAVFILE
1678
1679 if [ "$1" = --wholedisc ] ; then
1680 MODE=INDEX
1681 else
1682 MODE=PREGAP
1683 fi
1684
1685 vecho "One track is $ONETRACK"
1686 TRACKFILE="$(mungefilename "$TRACKNAME")"
1687 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1688 ALBUMFILE="$(mungefilename "$DALBUM")"
1689 if [ "$ONETRACK" = "y" ]; then
1690 if [ "$VARIOUSARTISTS" = "y" ]; then
1691 CUEWAVFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
1692 else
1693 CUEWAVFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
1694 fi
1695 vecho "Cue wav file is $CUEWAVFILE"
1696 else
1697 CUEWAVFILE="dummy.wav"
1698 fi
1699
1700 set -- $TRACKINFO
1701
1702 DISCID=$1
1703 TRACKS=$2
1704 shift 2
1705
1706 echo REM DISCID $DISCID
1707 echo FILE \""$CUEWAVEFILE"\" WAVE
1708
1709 if [ $1 -ne 150 ] && [ $MODE = "PREGAP" ] ; then
1710 OFFSET=$1
1711 else
1712 OFFSET=150
1713 fi
1714
1715 i=1
1716 while [ $i -le "$TRACKS" ] ; do
1717 LBA=$(( $1 - $OFFSET ))
1718 printf " TRACK %02i AUDIO\n" $i
1719 if [ $i -eq 1 -a $1 -ne 150 ] ; then
1720 if [ $MODE = PREGAP ] ; then
1721 echomsf " PREGAP " $(($OFFSET-150))
1722 else
1723 echo " INDEX 00 00:00:00"
1724 fi
1725 fi
1726 echomsf " INDEX 01 " $LBA
1727 i=$(($i+1))
1728 shift
1729 done
1730 }
1731
1732 # do_discid
1733 # This essentially the start of things
1734 do_discid ()
1735 {
1736 # Query the CD to get the track info, unless the user specified -C
1737 # or we are using some actions which do not need the CDDB data at all
1738 #if [ ! X"$EXPACTIONS" = "X" ]; then
1739 # :
1740 #elif [ -z "$DISCID" ]; then
1741 if [ -z "$DISCID" ]; then
1742 vecho -n "Getting CD track info... "
1743 # In OSX, unmount the disc before a query
1744 if [ "$OSFLAVOUR" = "OSX" ]; then
1745 diskutil unmount ${CDROM#/dev/}
1746 fi
1747 case "$CDROMREADERSYNTAX" in
1748 flac)
1749 if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev/null 2>&1 ; then
1750 case "$CUE2DISCID" in
1751 # FIXME # right now we have 2 cue2discid internal
1752 # implementations: builtin and abcde.cue2discid. Test
1753 # both of them and decide which one we want to use.
1754 builtin)
1755 #vecho "Using builtin cue2discid implementation..."
1756 CUESHEET="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
1757
1758 #TRACKS=$(echo $CUESHEET | grep -E "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
1759 #TRACKS=0
1760 OFFSETTIMES=( $(echo "$CUESHEET" | sed -n -e's/\ *INDEX 01\ \+//p' ) )
1761 TRACKS=${#OFFSETTIMES[@]}
1762 unset OFFSETS
1763 #echo "processing offsetimes ${OFFSETTIMES[@]}"
1764 for OFFSETTIME in ${OFFSETTIMES[@]}; do
1765 OFFSETS="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
1766 #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
1767 done
1768
1769 LEADOUT=$(( $(echo "$CUESHEET" | grep lead-out | get_last) * 75 / 44100 ))
1770 LEADIN=$(( $(echo "$CUESHEET" | grep lead-in | get_last) * 75 / 44100 ))
1771 makeids
1772 ;;
1773 *)
1774 #vecho "Using external python cue2discid implementation..."
1775 TRACKINFO=$($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" | $CUE2DISCID)
1776 ;;
1777 esac
1778 else
1779 log error "the input flac file does not contain a cuesheet."
1780 exit 1
1781 fi
1782 ;;
1783 # cdparanoia|debug)
1784 # CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1785 # RET=$?
1786 # if [ ! "$RET" = "0" ];then
1787 # log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1788 # fi
1789 #
1790 # TRACKS="$(echo "$CDPARANOIAOUTPUT" | grep -E '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1791 # CDPARANOIAAUDIOTRACKS="$TRACKS"
1792 #
1793 # LEADOUT="$(echo "$CDPARANOIAOUTPUT" | grep -Eo '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
1794 # OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
1795 # makeids
1796 # ;;
1797 *)
1798 case "$CDDBMETHOD" in
1799 cddb) TRACKINFO=$($CDDISCID "$CDROM") ;;
1800 musicbrainz) TRACKINFO=$($MUSICBRAINZ --command id --device "$CDROM") ;;
1801 esac
1802 ;;
1803 esac
1804 # Make sure there's a CD in there by checking cd-discid's return code
1805 if [ ! "$?" = "0" ]; then
1806 if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
1807 log error "cuesheet information from the flac file could not be read."
1808 log error "Perhaps the flac file does not contain a cuesheet?."
1809 exit 1
1810 else
1811 log error "CD could not be read. Perhaps there's no CD in the drive?"
1812 exit 1
1813 fi
1814 fi
1815 # In OSX, remount the disc again
1816 if [ "$OSFLAVOUR" = "OSX" ]; then
1817 diskutil mount ${CDROM#/dev/}
1818 fi
1819 WEHAVEACD=y
1820 DISCID=$(echo $TRACKINFO | cut -f1 -d' ')
1821 else
1822 TRACKINFO=$(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
1823 fi
1824
1825 # Get a full enumeration of tracks, sort it, and put it in the TRACKQUEUE.
1826 # This needs to be done now because a section of the resuming code will need
1827 # it later.
1828
1829 # get the number of digits to pad TRACKNUM with - we'll use this later
1830 # a CD can only hold 99 tracks, but since we support a feature for starting
1831 # numbering the tracks from a given number, we might need to set it as a
1832 # variable for the user to define... or obtain it somehow.
1833 if [ "$PADTRACKS" = "y" ] ; then
1834 TRACKNUMPADDING=2
1835 fi
1836
1837 ABCDETEMPDIR="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
1838 if [ -z "$TRACKQUEUE" ]; then
1839 if [ ! "$STRIPDATATRACKS" = "n" ]; then
1840 case "$CDROMREADERSYNTAX" in
1841 cdparanoia|debug)
1842 if [ "$WEHAVEACD" = "y" ]; then
1843 vecho "Querying the CD for audio tracks..."
1844 CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1845 RET=$?
1846 if [ ! "$RET" = "0" ];then
1847 log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1848 fi
1849 TRACKS="$(echo "$CDPARANOIAOUTPUT" | grep -E '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1850 CDPARANOIAAUDIOTRACKS="$TRACKS"
1851 else
1852 # Previous versions of abcde would store the tracks on a file, instead of the status record.
1853 if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
1854 echo cdparanoia-audio-tracks=$( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
1855 rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
1856 fi
1857 if [ -f "$ABCDETEMPDIR/status" ] && TRACKS=$(checkstatus cdparanoia-audio-tracks); then :; else
1858 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1859 fi
1860 fi
1861 ;;
1862 *) TRACKS=$(echo $TRACKINFO | cut -f2 -d' ') ;;
1863 esac
1864 else
1865 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1866 fi
1867 if echo "$TRACKS" | grep "[[:digit:]]" > /dev/null 2>&1 ;then :;else
1868 log info "The disc does not contain any tracks. Giving up..."
1869 exit 0
1870 fi
1871 echo -n "Grabbing entire CD - tracks: "
1872 if [ ! "$PADTRACKS" = "y" ] ; then
1873 TRACKNUMPADDING=$(echo -n $TRACKS | wc -c | tr -d ' ')
1874 fi
1875 TRACKS=$(printf "%0.${TRACKNUMPADDING}d" $TRACKS)
1876 X=0
1877 while [ "$X" -ne "$TRACKS" ]
1878 do
1879 X=$(printf "%0.${TRACKNUMPADDING}d" $(expr $X + 1))
1880 TRACKQUEUE=$(echo $TRACKQUEUE $X)
1881 done
1882 echo $TRACKQUEUE
1883 else
1884 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1885 # User-supplied track queue.
1886 # Weed out non-numbers, whitespace, then sort and weed out duplicates
1887 TRACKQUEUE=$(echo $TRACKQUEUE | sed 's-[^0-9 ]--g' | tr ' ' '\n' | grep -v ^$ | sort -n | uniq | tr '\n' ' ' | sed 's- $--g')
1888 # Once cleaned, obtain the highest value in the trackqueue for number padding
1889 for LASTTRACK in $TRACKQUEUE; do :; done
1890 if [ ! "$PADTRACKS" = "y" ] ; then
1891 TRACKNUMPADDING=$(echo -n $LASTTRACK | wc -c | tr -d ' ')
1892 fi
1893 # Now we normalize the trackqueue
1894 for TRACK in $TRACKQUEUE ; do
1895 TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
1896 PADTRACKQUEUE=$(echo $PADTRACKQUEUE $TRACKNUM)
1897 done
1898 TRACKQUEUE=$PADTRACKQUEUE
1899 echo Grabbing tracks: "$TRACKQUEUE"
1900 fi
1901
1902 QUEUEDTRACKS=$(echo $TRACKQUEUE | wc -w | tr -d ' ')
1903
1904 # We have the discid, create a temp directory after it to store all the temp
1905 # info
1906
1907 if [ -e "$ABCDETEMPDIR" ]; then
1908 echo -n "abcde: attempting to resume from $ABCDETEMPDIR"
1909 # It already exists, see if it's a directory
1910 if [ ! -d "$ABCDETEMPDIR" ]; then
1911 # This is a file/socket/fifo/device/etc, not a directory
1912 # Complain and exit
1913 echo >&2
1914 echo "abcde: file $ABCDETEMPDIR already exists and does not belong to abcde." >&2
1915 echo "Please investigate, remove it, and rerun abcde." >&2
1916 exit 1
1917 fi
1918 echo -n .
1919 # It's a directory, let's see if it's writable by us
1920 if [ ! -r "$ABCDETEMPDIR" ] || [ ! -w "$ABCDETEMPDIR" ] || [ ! -x "$ABCDETEMPDIR" ]; then
1921 # Nope, complain and exit
1922 echo >&2
1923 echo "abcde: directory $ABCDETEMPDIR already exists and is not writeable." >&2
1924 echo "Please investigate, remove it, and rerun abcde." >&2
1925 exit 1
1926 fi
1927 echo .
1928 # See if it's populated
1929 if [ ! -f "$ABCDETEMPDIR/discid" ]; then
1930 # Wipe and start fresh
1931 echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
1932 echo -n "this directory to continue. Continue [y/N]? " >&2
1933 if [ "$INTERACTIVE" = "y" ]; then
1934 read ANSWER
1935 else
1936 echo y >&2
1937 ANSWER=y
1938 fi
1939 if [ "$ANSWER" != "y" ]; then
1940 exit 1
1941 fi
1942 rm -rf "$ABCDETEMPDIR" || exit 1
1943 mkdir -p "$ABCDETEMPDIR"
1944 if [ "$?" -gt "0" ]; then
1945 # Directory already exists or could not be created
1946 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1947 exit 1
1948 fi
1949 else
1950 # Everything is fine. Check for ^encodetracklocation-
1951 # and encode-output entries in the status file and
1952 # remove them. These are not relevant across sessions.
1953 if [ -f "$ABCDETEMPDIR/status" ]; then
1954 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
1955 grep -v ^encodetracklocation- < "$ABCDETEMPDIR/status.old" \
1956 | grep -v ^encode-output > "$ABCDETEMPDIR/status"
1957 fi
1958 # Remove old error messages
1959 if [ -f "$ABCDETEMPDIR/errors" ]; then
1960 rm -f "$ABCDETEMPDIR/errors"
1961 fi
1962 fi
1963 else
1964 # We are starting from scratch
1965 mkdir -p "$ABCDETEMPDIR"
1966 if [ "$?" -gt "0" ]; then
1967 # Directory already exists or could not be created
1968 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1969 exit 1
1970 fi
1971 cat /dev/null > "$ABCDETEMPDIR/status"
1972 # Store the abcde version in the status file.
1973 echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
1974 fi
1975 if [ X"$DOCUE" = "Xy" -a X"$WEHAVEACD" = "Xy" ]; then
1976 if checkstatus cuefile > /dev/null 2>&1 ; then :; else
1977 CUEFILE=cue-$(echo "$TRACKINFO" | cut -f1 -d' ').txt
1978 vecho "Creating cue file..."
1979 case $CDROMREADERSYNTAX in
1980 flac)
1981 if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
1982 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1983 else
1984 log warning "the input flac file does not contain a cuesheet."
1985 fi
1986 ;;
1987 *)
1988 if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
1989 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1990 else
1991 log warning "reading the CUE sheet is still considered experimental"
1992 log warning "and there was a problem with the CD reading. abcde will continue,"
1993 log warning "but consider reporting the problem to the abcde author"
1994 fi
1995 ;;
1996 esac
1997 fi
1998 fi
1999 # If we got the CDPARANOIA status and it is not recorded, save it now
2000 if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
2001 if checkstatus cdparanoia-audio-tracks > /dev/null 2>&1; then :; else
2002 echo cdparanoia-audio-tracks=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
2003 fi
2004 fi
2005
2006 # Create the discid file
2007 echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
2008 if checkstatus cddbmethod > /dev/null 2>&1 ; then :; else
2009 echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
2010 fi
2011 }
2012
2013 # do_cleancue
2014 # Create a proper CUE file based on the CUE file we created before.
2015 do_cleancue()
2016 {
2017 if CUEFILE_IN="$ABCDETEMPDIR"/$(checkstatus cuefile); then
2018 CUEFILE_OUT=$CUEFILE_IN.out
2019 ### FIXME ### checkstatus cddb
2020 if [ -e "$CDDBDATA" ]; then
2021 vecho "Adding metadata to the cue file..."
2022 # FIXME It doesn't preserve spaces! Why?
2023 # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
2024 n=1
2025 echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
2026 echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
2027 # Set IFS to <newline> to prevent read from swallowing spaces and tabs
2028 OIFS="$IFS"
2029 IFS='
2030 '
2031 cat "$CUEFILE_IN" | while read line
2032 do
2033 if echo "$line" | grep "INDEX 01" > /dev/null 2>&1 ; then
2034 # FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
2035 # echo "$line" >> "$CUEFILE_OUT"
2036 # if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
2037 eval track="\$TRACK$n"
2038 n=$(expr $n + 1)
2039 echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
2040 # When making a single-track rip, put the
2041 # actual file name into the file declaration
2042 # in the cue file so that it is usable by
2043 # music players and the like
2044 elif [ "$ONETRACK" = "y" ] &&
2045 echo "$line" | grep '^FILE "dummy.wav" WAVE' > /dev/null 2>&1 ; then
2046
2047 TRACKFILE="$(mungefilename "$TRACKNAME")"
2048 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
2049 ALBUMFILE="$(mungefilename "$DALBUM")"
2050
2051 if [ "$VARIOUSARTISTS" = "y" ]; then
2052 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
2053 else
2054 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
2055 fi
2056
2057 echo "FILE \"$OUTPUTFILE\" WAVE" >> "$CUEFILE_OUT"
2058 continue
2059 fi
2060 # FIXME # If the lines above are uncommented, remove the line below.
2061 echo "$line" >> "$CUEFILE_OUT"
2062 done
2063 IFS="$OIFS"
2064 mv "$CUEFILE_OUT" "$CUEFILE_IN"
2065 echo "cleancuefile" >> "$ABCDETEMPDIR/status"
2066 fi
2067 fi
2068 }
2069
2070 # do_cddbparse
2071 # Parses a CDDB file and outputs the title and the track names.
2072 # Variables: CDDBFILE
2073 do_cddbparse ()
2074 {
2075 CDDBPARSEFILE="$1"
2076 # List out disc title/author and contents
2077 if [ "$ONETRACK" = "y" ]; then
2078 vecho "ONETRACK mode selected: displaying only the title of the CD..."
2079 fi
2080 echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
2081 if [ X"$SHOWCDDBYEAR" = "Xy" ]; then
2082 PARSEDYEAR=$(grep DYEAR "${CDDBPARSEFILE}" | cut '-d=' -f2-)
2083 if [ ! X"$PARSEDYEAR" = "X" ]; then
2084 echo "Year: $PARSEDYEAR"
2085 fi
2086 fi
2087 if [ X"$SHOWCDDBGENRE" = "Xy" ]; then
2088 PARSEDGENRE=$(grep DGENRE "${CDDBPARSEFILE}" | cut '-d=' -f2-)
2089 if [ ! X"$PARSEDGENRE" = "X" ]; then
2090 echo "Genre: $PARSEDGENRE"
2091 fi
2092 fi
2093 if [ ! "$ONETRACK" = "y" ]; then
2094 for TRACK in $(f_seq_row 1 $TRACKS)
2095 do
2096 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "${CDDBPARSEFILE}" | cut -f2- -d= | tr -d \\r\\n)"
2097 done
2098 fi
2099 }
2100
2101 # do_localcddb
2102 # Check for a local CDDB file, and report success
2103 do_localcddb ()
2104 {
2105 if checkstatus cddb-readcomplete && checkstatus cddb-choice >/dev/null; then :; else
2106
2107 CDDBLOCALSTATUS="notfound"
2108 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2109 USELOCALRESP="y"
2110
2111 if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
2112 CDDBLOCALRESULTS="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
2113 if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
2114 if (( $(echo "${CDDBLOCALRESULTS}" | wc -l) == 1 )); then
2115 CDDBLOCALFILE="${CDDBLOCALRESULTS}"
2116 CDDBLOCALMATCH=single
2117 elif (( $(echo "${CDDBLOCALRESULTS}" | wc -l) > 1 )); then
2118 CDDBLOCALMATCH=multiple
2119 fi
2120 else
2121 CDDBLOCALMATCH=none
2122 fi
2123 elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
2124 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2125 CDDBLOCALMATCH=single
2126 else
2127 CDDBLOCALMATCH=none
2128 fi
2129
2130 # If the user has selected to check a local CDDB repo, we proceed with it
2131 case $CDDBLOCALMATCH in
2132 multiple)
2133 echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
2134 X=0
2135 echo "$CDDBLOCALRESULTS" | while read RESULT ; do
2136 X=$(expr $X + 1)
2137 # List out disc title/author and contents
2138 CDDBLOCALREAD="$ABCDETEMPDIR/cddblocalread.$X"
2139 cat "$RESULT" > "${CDDBLOCALREAD}"
2140 {
2141 echo -n "#$X: "
2142 do_cddbparse "${CDDBLOCALREAD}"
2143 echo ""
2144 ##FIXME## QUICK HACK !!!!
2145 if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
2146 } >> "$ABCDETEMPDIR/cddblocalchoices"
2147 done
2148 if [ $(cat "$ABCDETEMPDIR/cddblocalchoices" | wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
2149 page "$ABCDETEMPDIR/cddblocalchoices"
2150 else
2151 # It's all going to fit in one page, cat it
2152 cat "$ABCDETEMPDIR/cddblocalchoices" >&2
2153 fi
2154 CDDBLOCALCHOICES=$( echo "$CDDBLOCALRESULTS" | wc -l )
2155 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2156 CDDBLOCALCHOICENUM=-1
2157 if [ "$INTERACTIVE" = "y" ]; then
2158 while [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
2159 echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
2160 read CDDBLOCALCHOICE
2161 [ x"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE="1"
2162 # FIXME # Introduce diff's
2163 if echo $CDDBLOCALCHOICE | grep -E "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2164 diffentries cddblocalread "$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
2165 elif echo $CDDBLOCALCHOICE | grep -E "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2166 # Make sure we get a valid choice
2167 CDDBLOCALCHOICENUM=$(echo $CDDBLOCALCHOICE | xargs printf %d 2>/dev/null)
2168 if [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
2169 echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
2170 fi
2171 fi
2172 done
2173 else
2174 ### FIXME ###
2175 #echo "Selected ..."
2176 CDDBLOCALRESP=y
2177 CDDBLOCALCHOICENUM=1
2178 fi
2179 if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
2180 #echo "Using local copy of CDDB data"
2181 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2182 cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
2183 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2184 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2185 do_cddbparse "$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
2186 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2187 CDDBLOCALSTATUS="found"
2188 else
2189 #echo "Not using local copy of CDDB data"
2190 CDDBLOCALSTATUS="notfound"
2191 fi
2192 ;;
2193 single)
2194 # List out disc title/author and contents
2195 do_cddbparse "${CDDBLOCALFILE}"
2196 #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
2197 # echo -n "Embedded cuesheet entry found, use it [Y/n]? " >&2
2198 #else
2199 echo -n "Locally cached CDDB entry found, use it [Y/n]? " >&2
2200 #fi
2201 if [ "$INTERACTIVE" = "y" ]; then
2202 read USELOCALRESP
2203 while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
2204 echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
2205 read USELOCALRESP
2206 done
2207 [ x"$USELOCALRESP" = "x" ] && USELOCALRESP="y"
2208 else
2209 echo "y" >&2
2210 fi
2211 if [ "$USELOCALRESP" = "y" ]; then
2212 #echo "Using local copy of CDDB data"
2213 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2214 cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
2215 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2216 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2217 do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
2218 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2219 CDDBLOCALSTATUS="single"
2220 else
2221 #echo "Not using local copy of CDDB data"
2222 CDDBLOCALSTATUS="notfound"
2223 fi
2224 ;;
2225 none)
2226 CDDBLOCALSTATUS="notfound"
2227 ;;
2228 esac
2229 fi
2230 }
2231
2232 # do_cdtext
2233 # Try to read CD-Text from the drive using icedax / cdda2wav
2234 do_cdtext ()
2235 {
2236 if new_checkexec icedax; then
2237 CDTEXT_READER=icedax
2238 elif new_checkexec cdda2wav; then
2239 CDTEXT_READER=cdda2wav
2240 else
2241 # Didn't find either, bail
2242 return 0
2243 fi
2244
2245 if [ "$CDROMID" = "" ]; then
2246 CDDA2WAVCDROM="$CDROM"
2247 else
2248 CDDA2WAVCDROM="$CDROMID"
2249 fi
2250
2251 # Do we have CD-Text on the disc (and can the drive read it?)
2252 ${CDTEXT_READER} -J -N -D ${CDDA2WAVCDROM} > $ABCDETEMPDIR/cd-text 2>&1
2253 grep -q '^CD-Text: detected' $ABCDETEMPDIR/cd-text
2254 ERRORCODE=$?
2255 if [ $ERRORCODE -ne 0 ]; then
2256 # No CD-Text found, bail
2257 return 0
2258 fi
2259
2260 rm -f "$ABCDETEMPDIR/cddbchoices"
2261 CDDBCHOICES=1
2262 # Make an empty template
2263 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.1"
2264 echo -n "Retrieved 1 CD-Text match..." >> "$ABCDETEMPDIR/cddbchoices"
2265 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2266 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2267 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2268 ATITLE=$(grep -e '^Album title:' ${ABCDETEMPDIR}/cd-text | cut -c14- )
2269 echo "200 none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
2270 # List out disc title/author and contents
2271 echo ---- ${ATITLE} ---- >> "$ABCDETEMPDIR/cddbchoices"
2272 for TRACK in $(f_seq_row 1 $TRACKS)
2273 do
2274 TRACKM1=$(($TRACK - 1))
2275 TITLE="$(grep -E ^Track\ +$TRACK: "$ABCDETEMPDIR/cd-text" | tr -d \\r\\n | sed 's~^Track ..: .~~g;'"s~'$~~g")"
2276 echo "$TRACK: $TITLE" >> "$ABCDETEMPDIR/cddbchoices"
2277 sed -i "s~^TTITLE${TRACKM1}=.*~TTITLE${TRACKM1}=${TITLE}~" $ABCDETEMPDIR/cddbread.1
2278 done
2279 sed -i "s~^DTITLE=.*~DTITLE=${ATITLE}~" $ABCDETEMPDIR/cddbread.1
2280 echo >> "$ABCDETEMPDIR/cddbchoices"
2281 echo "cdtext-readcomplete" >> "$ABCDETEMPDIR/status"
2282 }
2283
2284 # do_musicbrainz
2285 # Work with the musicbrainz WS API, then transform the results here so
2286 # they look (very) like the results from CDDB. Maybe not the best way
2287 # to go, but it Works For Me (TM)
2288
2289 do_musicbrainz ()
2290 {
2291 if checkstatus musicbrainz-readcomplete; then :; else
2292 vecho "Obtaining Musicbrainz results..."
2293 # If MB is to be used, interpret the query results and read all
2294 # the available entries.
2295 rm -f "$ABCDETEMPDIR/cddbchoices"
2296 CDDBCHOICES=1 # Overridden by multiple matches
2297 MBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2298 ${MUSICBRAINZ} --command data --discid "$MBDISCID" --workdir $ABCDETEMPDIR
2299
2300 # The helper script will write disc matches out to
2301 # cddbread.*. Count how many we have
2302 NUM_RESPONSES=$(echo ${ABCDETEMPDIR}/cddbread.* | wc -w)
2303 if [ "$NUM_RESPONSES" -eq 1 ] ; then
2304 # One exact match
2305 echo -n "Retrieved 1 Musicbrainz match..." >> "$ABCDETEMPDIR/cddbchoices"
2306 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2307 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2308 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2309 ATITLE=$(grep -e '^DTITLE=' ${ABCDETEMPDIR}/cddbread.1 | cut -c8- )
2310 echo "200 none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
2311 # List out disc title/author and contents
2312 echo ---- ${ATITLE} ---- >> "$ABCDETEMPDIR/cddbchoices"
2313 for TRACK in $(f_seq_row 1 $TRACKS)
2314 do
2315 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2316 done
2317 echo >> "$ABCDETEMPDIR/cddbchoices"
2318 elif [ "$NUM_RESPONSES" -eq 0 ] ; then
2319 # No matches. Use the normal cddb template for the user to
2320 # fill in
2321 echo "No Musicbrainz match." >> "$ABCDETEMPDIR/cddbchoices"
2322 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2323 # List out disc title/author and contents of template
2324 echo ---- Unknown Artist / Unknown Album ---- >> "$ABCDETEMPDIR/cddbchoices"
2325 UNKNOWNDISK=y
2326 for TRACK in $(f_seq_row 1 $TRACKS)
2327 do
2328 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2329 done
2330 echo >> "$ABCDETEMPDIR/cddbchoices"
2331 echo cddb-read-0-complete >> "$ABCDETEMPDIR/status"
2332 echo cddb-choice=0 >> "$ABCDETEMPDIR/status"
2333 echo 503 > "$ABCDETEMPDIR/cddbquery"
2334 else
2335 echo "210 Found exact matches, list follows (until terminating .)" > "$ABCDETEMPDIR/cddbquery"
2336 echo "Multiple Musicbrainz matches:" >> "$ABCDETEMPDIR/cddbchoices"
2337 for file in $ABCDETEMPDIR/cddbread.*
2338 do
2339 X=$(echo $file | sed 's/^.*cddbread\.//g')
2340 echo cddb-read-$X-complete >> "$ABCDETEMPDIR/status"
2341 ATITLE=$(grep -e '^DTITLE=' ${ABCDETEMPDIR}/cddbread.$X | cut -c8- )
2342 echo "none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
2343 # List out disc title/author and contents
2344 echo "#$X: ---- ${ATITLE} ----" >> "$ABCDETEMPDIR/cddbchoices"
2345 for TRACK in $(f_seq_row 1 $TRACKS)
2346 do
2347 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2348 done
2349 echo >> "$ABCDETEMPDIR/cddbchoices"
2350 done
2351 echo "." >> "$ABCDETEMPDIR/cddbquery"
2352 fi
2353 echo "musicbrainz-readcomplete" >> "$ABCDETEMPDIR/status"
2354 fi
2355 }
2356
2357 # do_cddbstat
2358 do_cddbstat ()
2359 {
2360 # Perform CDDB protocol version check if it hasn't already been done
2361 if checkstatus cddb-statcomplete; then :; else
2362 if [ "$CDDBAVAIL" = "n" ]; then
2363 ERRORCODE=no_query
2364 echo 503 > "$ABCDETEMPDIR/cddbstat"
2365 else
2366 rc=1
2367 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2368 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2369 while test $rc -eq 1 -a $CDDBPROTO -ge 3; do
2370 vecho "Checking CDDB server status..."
2371 $CDDBTOOL stat $CDDBURL $CDDBUSER $CDDBHOST $CDDBPROTO > "$ABCDETEMPDIR/cddbstat"
2372 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
2373 case "$RESPONSECODE" in
2374 210) # 210 OK, status information follows (until terminating `.')
2375 rc=0
2376 ;;
2377 501) # 501 Illegal CDDB protocol level: <n>.
2378 CDDBPROTO=`expr $CDDBPROTO - 1`
2379 ;;
2380 *) # Try a cddb query, since freedb2.org doesn't support the stat or ver commands
2381 # FreeDB TESTCD disc-id is used for query
2382 $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST 03015501 1 296 344 > "$ABCDETEMPDIR/cddbstat"
2383 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
2384 case "$RESPONSECODE" in
2385 2??) # Server responded, everything seems OK
2386 rc=0
2387 ;;
2388 esac
2389 ;;
2390 esac
2391 done
2392 if test $rc -eq 1; then
2393 CDDBAVAIL="n"
2394 fi
2395 fi
2396 echo cddb-statcomplete >> "$ABCDETEMPDIR/status"
2397 fi
2398 }
2399
2400
2401 # do_cddbquery
2402 do_cddbquery ()
2403 {
2404 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2405 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2406
2407 # Perform CDDB query if it hasn't already been done
2408 if checkstatus cddb-querycomplete; then :; else
2409 if [ "$CDDBAVAIL" = "n" ]; then
2410 ERRORCODE=no_query
2411 echo 503 > "$ABCDETEMPDIR/cddbquery"
2412 # The default CDDBLOCALSTATUS is "notfound"
2413 # This part will be triggered if the user CDDB repo does not
2414 # contain the entry, or if we are not trying to use the repo.
2415 else
2416 vecho "Querying the CDDB server..."
2417 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2418 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2419 $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $TRACKINFO > "$ABCDETEMPDIR/cddbquery"
2420 ERRORCODE=$?
2421 case $ERRORCODE in
2422 0) # success
2423 ;;
2424 12|13|14)
2425 # no match found in database,
2426 # wget/fetch error, or user requested not to use CDDB
2427 # Make up an error code (503) that abcde
2428 # will recognize in do_cddbread
2429 # and compensate by making a template
2430 echo 503 > "$ABCDETEMPDIR/cddbquery"
2431 ;;
2432 *) # strange and unknown error
2433 echo ERRORCODE=$ERRORCODE
2434 echo "abcde: $CDDBTOOL returned unknown error code"
2435 ;;
2436 esac
2437 fi
2438 echo cddb-querycomplete >> "$ABCDETEMPDIR/status"
2439 fi
2440 }
2441
2442 # do_cddbread
2443 do_cddbread ()
2444 {
2445 # If it's not to be used, generate a template.
2446 # Then, display it (or them) and let the user choose/edit it
2447 if checkstatus cddb-readcomplete; then :; else
2448 vecho "Obtaining CDDB results..."
2449 # If CDDB is to be used, interpret the query results and read all
2450 # the available entries.
2451 rm -f "$ABCDETEMPDIR/cddbchoices"
2452 CDDBCHOICES=1 # Overridden by multiple matches
2453 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbquery" | cut -f1 -d' ')
2454 case "$RESPONSECODE" in
2455 200)
2456 # One exact match, retrieve it
2457 # 200 [section] [discid] [artist] / [title]
2458 if checkstatus cddb-read-1-complete; then :; else
2459 echo -n "Retrieving 1 CDDB match..." >> "$ABCDETEMPDIR/cddbchoices"
2460 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(cut -f2,3 -d' ' "$ABCDETEMPDIR/cddbquery") > "$ABCDETEMPDIR/cddbread.1"
2461 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2462 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2463 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2464 fi
2465 # List out disc title/author and contents
2466 echo ---- "$(cut '-d ' -f4- "$ABCDETEMPDIR/cddbquery")" ---- >> "$ABCDETEMPDIR/cddbchoices"
2467 for TRACK in $(f_seq_row 1 $TRACKS)
2468 do
2469 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2470 done
2471 echo >> "$ABCDETEMPDIR/cddbchoices"
2472 ;;
2473 202|403|409|503)
2474 # No match
2475 case "$RESPONSECODE" in
2476 202) echo "No CDDB match." >> "$ABCDETEMPDIR/cddbchoices" ;;
2477 403|409) echo "CDDB entry is corrupt, or the handshake failed." >> "$ABCDETEMPDIR/cddbchoices" ;;
2478 503) echo "CDDB unavailable." >> "$ABCDETEMPDIR/cddbchoices" ;;
2479 esac
2480 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2481 # List out disc title/author and contents of template
2482 echo ---- Unknown Artist / Unknown Album ---- >> "$ABCDETEMPDIR/cddbchoices"
2483 UNKNOWNDISK=y
2484 for TRACK in $(f_seq_row 1 $TRACKS)
2485 do
2486 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2487 done
2488 echo >> "$ABCDETEMPDIR/cddbchoices"
2489 echo cddb-read-0-complete >> "$ABCDETEMPDIR/status"
2490 echo cddb-choice=0 >> "$ABCDETEMPDIR/status"
2491 ;;
2492 210|211)
2493 # Multiple exact, (possibly multiple) inexact matches
2494 IN=
2495 if [ "$RESPONSECODE" = "211" ]; then IN=in; fi
2496 if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery" | tr -d ' ')" -eq 3 ]; then
2497 echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
2498 tail -n +2 "$ABCDETEMPDIR/cddbquery" | head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
2499 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2500 else
2501 echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
2502 fi
2503 vecho -n "Retrieving multiple matches... "
2504 grep -v ^[.]$ "$ABCDETEMPDIR/cddbquery" | ( X=0
2505 read DISCINFO # eat top line
2506 while read DISCINFO
2507 do
2508 X=$(expr $X + 1)
2509 if checkstatus cddb-read-$X-complete; then :; else
2510 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(echo $DISCINFO | cut -f1,2 -d' ') > "$ABCDETEMPDIR/cddbread.$X"
2511 echo cddb-read-$X-complete >> "$ABCDETEMPDIR/status"
2512 fi
2513 # List out disc title/author and contents
2514 echo \#$X: ---- "$DISCINFO" ---- >> "$ABCDETEMPDIR/cddbchoices"
2515 for TRACK in $(f_seq_row 1 $TRACKS)
2516 do
2517 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2518 done
2519 echo >> "$ABCDETEMPDIR/cddbchoices"
2520 done )
2521 vecho "done."
2522 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2523 ;;
2524 999)
2525 # Using local copy.
2526 for TRACK in $(f_seq_row 1 $TRACKS)
2527 do
2528 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2529 done
2530 echo >> "$ABCDETEMPDIR/cddbchoices"
2531 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2532 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2533 ;;
2534 esac
2535 echo "cddb-readcomplete" >> "$ABCDETEMPDIR/status"
2536 fi
2537 }
2538
2539 # do_cddbedit
2540 do_cddbedit ()
2541 {
2542 if checkstatus cddb-edit >/dev/null; then
2543 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2544 VARIOUSARTISTS="$(checkstatus variousartists)"
2545 VARIOUSARTISTSTYLE="$(checkstatus variousartiststyle)"
2546 return 0
2547 fi
2548 if [ "$INTERACTIVE" = "y" ]; then
2549 # We should show the CDDB results both when we are not using the local CDDB repo
2550 # or when we are using it but we could not find a proper match
2551 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2552 # Display the $ABCDETEMPDIR/cddbchoices file created above
2553 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2554 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2555 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2556 CHOICE=$(checkstatus cddb-choice)
2557 if [ -n "$CHOICE" ] ; then
2558 case $CDDBCHOICES in
2559 -1) if head -1 "$ABCDETEMPDIR/cddbquery" | grep "^$" > /dev/null 2>&1 ; then
2560 log error "CDDB query failed!"
2561 exit 1
2562 else
2563 cat "$ABCDETEMPDIR/cddbchoices"
2564 fi
2565 ;;
2566 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2567 *)
2568 echo "Selected: #$CHOICE"
2569 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2570 ;;
2571 esac
2572 else
2573 # The user has a choice to make, display the info in a pager if necessary
2574 if [ $(cat "$ABCDETEMPDIR/cddbchoices" | wc -l) -ge 24 ]; then
2575 page "$ABCDETEMPDIR/cddbchoices"
2576 else
2577 # It's all going to fit in one page, cat it
2578 cat "$ABCDETEMPDIR/cddbchoices" >&2
2579 fi
2580
2581 CDDBCHOICENUM=""
2582 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2583 CDCHOICENUM=-1
2584 # I'll take CDDB read #3 for $400, Alex
2585 while [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; do
2586 echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
2587 read CDDBCHOICE
2588 [ X"$CDDBCHOICE" = "X" ] && CDDBCHOICE=1
2589 if echo $CDDBCHOICE | grep -E "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2590 if [ ! X"$DIFF" = "X" ]; then
2591 PARSECHOICE1=$(echo $CDDBCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
2592 PARSECHOICE2=$(echo $CDDBCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
2593 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
2594 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
2595 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
2596 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBCHOICES" >&2
2597 else
2598 # We parse the 2 choices to diff, store them in temporary files and diff them.
2599 for PARSECHOICE in $(echo $CDDBCHOICE | tr , \ ); do
2600 do_cddbparse "$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
2601 done
2602 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
2603 $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
2604 if [ $(cat "$ABCDETEMPDIR/cddbread.diff" | wc -l) -ge 24 ]; then
2605 page "$ABCDETEMPDIR/cddbread.diff"
2606 else
2607 cat "$ABCDETEMPDIR/cddbread.diff" >&2
2608 fi
2609 fi
2610 else
2611 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
2612 fi
2613 elif echo $CDDBCHOICE | grep -E "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2614 # Make sure we get a valid choice
2615 CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
2616 if [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; then
2617 echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
2618 fi
2619 fi
2620 done
2621 if [ "$CDCHOICENUM" = "0" ]; then
2622 vecho "Creating empty CDDB template..."
2623 UNKNOWNDISK=y
2624 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2625 else
2626 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2627 do_cddbparse "$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
2628 fi
2629 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2630 fi
2631 fi
2632 else
2633 # We need some code to show the selected option when local repository is selected and we have found a match
2634 vecho "Using cached CDDB match..." >&2
2635 # Display the $ABCDETEMPDIR/cddbchoices file created above
2636 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2637 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2638 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2639 CHOICE=$(checkstatus cddb-choice)
2640 if [ "$USELOCALRESP" = "y" ]; then :; else
2641 if [ -n "$CHOICE" ] ; then
2642 case $CDDBCHOICES in
2643 0)
2644 UNKNOWNDISK=y
2645 echo "Selected template."
2646 ;;
2647 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2648 *)
2649 echo "Selected: #$CHOICE"
2650 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2651 ;;
2652 esac
2653 fi
2654 fi
2655 fi
2656 fi
2657 else
2658 # We're noninteractive - pick the first choice.
2659 # But in case we run a previous instance and selected a choice, use it.
2660 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2661 # Show the choice if we are not using the locally stored one
2662 # or when the local search failed to find a match.
2663 PREVIOUSCHOICE=$(checkstatus cddb-choice)
2664 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2665 #if [ "$PREVIOUSCHOICE" ]; then
2666 cat "$ABCDETEMPDIR/cddbchoices"
2667 #fi
2668 fi
2669 if [ ! -z "$PREVIOUSCHOICE" ] ; then
2670 CDCHOICENUM=$PREVIOUSCHOICE
2671 else
2672 CDCHOICENUM=1
2673 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2674 fi
2675 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2676 fi
2677 fi
2678
2679 # sanity check
2680 if checkstatus cddb-choice >/dev/null; then :; else
2681 echo "abcde: internal error: cddb-choice not recorded." >&2
2682 exit 1
2683 fi
2684 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2685 echo -n "Edit selected CDDB data? [y/n] (" >&2
2686 if [ "$INTERACTIVE" = "y" ]; then
2687 if [ "$UNKNOWNDISK" = "y" ]; then
2688 echo -n "y): " >&2
2689 read EDITCDDB
2690 [ "$EDITCDDB" != "n" ] && EDITCDDB=y
2691 else
2692 echo -n "n): " >&2
2693 read EDITCDDB
2694 fi
2695 else
2696 echo "n): n" >&2
2697 EDITCDDB=n
2698 fi
2699 if [ "$EDITCDDB" = "y" ]; then
2700 CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
2701
2702 # Use the debian sensible-editor wrapper to pick the editor that the
2703 # user has requested via their $EDITOR environment variable
2704 if [ -x "/usr/bin/sensible-editor" ]; then
2705 /usr/bin/sensible-editor "$CDDBDATA"
2706 elif [ -n "$EDITOR" ]; then
2707 if [ -x $(which "${EDITOR%%\ *}") ]; then
2708 # That failed, try to load the preferred editor, starting
2709 # with their EDITOR variable
2710 eval $(echo "$EDITOR") \"$CDDBDATA\"
2711 fi
2712 # If that fails, check for a vi
2713 elif which vi >/dev/null 2>&1; then
2714 vi "$CDDBDATA"
2715 elif [ -x /usr/bin/vim ]; then
2716 /usr/bin/vim "$CDDBDATA"
2717 elif [ -x /usr/bin/vi ]; then
2718 /usr/bin/vi "$CDDBDATA"
2719 elif [ -x /bin/vi ]; then
2720 /bin/vi "$CDDBDATA"
2721 # nano should be on all (modern, i.e., sarge) debian systems
2722 elif which nano >/dev/null 2>&1 ; then
2723 nano "$CDDBDATA"
2724 elif [ -x /usr/bin/nano ]; then
2725 /usr/bin/nano "$CDDBDATA"
2726 # mg should be on all OpenBSD systems
2727 elif which mg >/dev/null 2>&1 ; then
2728 mg "$CDDBDATA"
2729 elif [ -x /usr/bin/mg ]; then
2730 /usr/bin/mg "$CDDBDATA"
2731 # bomb out
2732 else
2733 log warning "no editor available. Check your EDITOR environment variable."
2734 fi
2735 # delete editor backup file if it exists
2736 if [ -w "$CDDBDATA~" ]; then
2737 rm -f "$CDDBDATA~"
2738 fi
2739 fi
2740
2741 # Some heuristics first. Look at Disc Title, and if it starts with
2742 # "Various", then we'll assume Various Artists
2743 if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | grep -Eci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
2744 echo "Looks like a Multi-Artist CD" >&2
2745 VARIOUSARTISTS=y
2746 else
2747 echo -n "Is the CD multi-artist [y/N]? " >&2
2748 if [ "$INTERACTIVE" = "y" ]; then
2749 read VARIOUSARTISTS
2750 else
2751 echo n >&2
2752 VARIOUSARTISTS=n
2753 fi
2754 fi
2755 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
2756 # Set a default
2757 DEFAULTSTYLE=1
2758 # Need NUMTRACKS before cddb-tool will return it:
2759 NUMTRACKS=$(grep -E '^TTITLE[0-9]+=' "$CDDBDATA" | wc -l)
2760 if [ "$(grep -c "^TTITLE.*\/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2761 # More than 1/2 tracks contain a "/", so guess forward
2762 DEFAULTSTYLE=1
2763 elif [ "$(grep -c "^TTITLE.*\-" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2764 # More than 1/2 contain a "-", so guess forward-dash
2765 DEFAULTSTYLE=2
2766 elif [ "$(grep -c "^TTITLE.*(.*)" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2767 # More than 1/2 contain something in parens, so guess trailing-paren
2768 DEFAULTSTYLE=6
2769 fi
2770
2771 echo "1) Artist / Title" >&2
2772 echo "2) Artist - Title" >&2
2773 echo "3) Title / Artist" >&2
2774 echo "4) Title - Artist" >&2
2775 echo "5) Artist: Title" >&2
2776 echo "6) Title (Artist)" >&2
2777 echo "7) This is a single-artist CD" >&2
2778 echo -n "Which style of multiple artist entries is it? [1-7] ($DEFAULTSTYLE): " >&2
2779 if [ "$INTERACTIVE" = "y" ]; then
2780 read VARIOUSARTISTSTYLE
2781 else
2782 echo $DEFAULTSTYLE >&2
2783 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2784 fi
2785 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2786 # If they press Enter, then the default style (0) was chosen
2787 while [ $VARIOUSARTISTSTYLE -lt 0 ] || [ $VARIOUSARTISTSTYLE -gt 7 ]; do
2788 echo "Invalid selection. Please choose a number between 1 and 7."
2789 echo -n "Selection [1-7]: "
2790 read VARIOUSARTISTSTYLE
2791 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2792 done
2793 if [ "$VARIOUSARTISTSTYLE" = "0" ]; then
2794 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2795 fi
2796 vecho "Selected: $VARIOUSARTISTSTYLE"
2797 case "$VARIOUSARTISTSTYLE" in
2798 1) # Artist / Title
2799 VARIOUSARTISTSTYLE=forward
2800 ;;
2801 2) # Artist - Title
2802 VARIOUSARTISTSTYLE=forward-dash
2803 ;;
2804 3) # Title / Artist
2805 VARIOUSARTISTSTYLE=reverse
2806 ;;
2807 4) # Title - Artist
2808 VARIOUSARTISTSTYLE=reverse-dash
2809 ;;
2810 5) # Artist: Title
2811 VARIOUSARTISTSTYLE=colon
2812 ;;
2813 6) # Title (Artist)
2814 VARIOUSARTISTSTYLE=trailing-paren
2815 ;;
2816 7) # Single Artist
2817 VARIOUSARTISTS=n
2818 ;;
2819 esac
2820 fi
2821
2822 echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
2823 echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
2824
2825 if [ "$EDITCDDB" = "y" ] && [ "$CDDBMETHOD" = "cddb" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
2826 if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
2827 # This works but does not have the necessary error checking
2828 # yet. If you are familiar with the CDDB spec
2829 # (see http://www.freedb.org/src/latest/DBFORMAT)
2830 # and can create an error-free entry on your own, then put
2831 # UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
2832 # abcde.conf to enable it. Put CDDBSUBMIT=email@address in
2833 # your abcde.conf to change the email address submissions are
2834 # sent to.
2835
2836 # submit the modified file, if they want
2837 if [ "$NOSUBMIT" != "y" ]; then
2838 echo -n "Do you want to submit this entry to $CDDBSUBMIT [y/N]? "
2839 read YESNO
2840 while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
2841 [ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
2842 do
2843 echo -n 'Invalid selection. Please answer "y" or "n": '
2844 read YESNO
2845 done
2846 if [ "$YESNO" = "y" ] || [ "$YESNO" = "Y" ]; then
2847 echo -n "Sending..."
2848 $CDDBTOOL send "$CDDBDATA" $CDDBSUBMIT
2849 echo "done."
2850 fi
2851 fi
2852 fi
2853 fi
2854 ### FIXME ###
2855 # User CDDBLOCALPOLICY to find out if we store the file or not...
2856 # Cache edited CDDB entry in the user's cddb dir
2857 if [ "$CDDBCOPYLOCAL" = "y" ]; then
2858 # Make sure the cache directory exists
2859 mkdir -p $CDDBLOCALDIR
2860 cat "$CDDBDATA" | tail -n $(expr $(cat "$CDDBDATA" | wc -l ) - 1 ) > ${CDDBLOCALDIR}/$(echo "$TRACKINFO" | cut -d' ' -f1)
2861 fi
2862
2863 echo "cddb-edit" >> "$ABCDETEMPDIR/status"
2864 }
2865
2866 # do_cdread [tracknumber]
2867 # do_cdread onetrack [firsttrack] [lasttrack]
2868 #
2869 do_cdread ()
2870 {
2871 # The commands here don't go through run_command because they're never supposed to be silenced
2872 # return codes need to be doublechecked anyway, however
2873 if [ "$1" = "onetrack" ]; then
2874 # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
2875 # FIXME # Until then, we grab the whole CD in one track, no matter what
2876 # the user said
2877 # We need the first and last track for cdda2wav/icedax
2878 FIRSTTRACK=$2
2879 LASTTRACK=$(expr $3 + 0)
2880 UTRACKNUM=$FIRSTTRACK
2881 case "$CDROMREADERSYNTAX" in
2882 flac) READTRACKNUMS="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
2883 cdparanoia)
2884 #XX FIXME XX
2885 # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
2886 READTRACKNUMS="$FIRSTTRACK-$LASTTRACK" ;;
2887 cdda2wav | icedax) READTRACKNUMS="$FIRSTTRACK+$LASTTRACK" ;;
2888 *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
2889 exit 1 ;;
2890 esac
2891 else
2892 UTRACKNUM=$1
2893 fi
2894 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
2895 if [ "$USEPIPES" = "y" ]; then
2896 TEMPARG="PIPERIPPER_$CDROMREADERSYNTAX"
2897 FILEARG="$( eval echo "\$$TEMPARG" )"
2898 REDIR="y"
2899 PIPE_MESSAGE="and encoding "
2900 else
2901 WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
2902 case "$CDROMREADERSYNTAX" in
2903 ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
2904 flac)
2905 FILEARG="--output-name=$WAVDATA"
2906 ;;
2907 dagrab)
2908 FILEARG="-f $WAVDATA"
2909 ;;
2910 *)
2911 FILEARG="$WAVDATA"
2912 ;;
2913 esac
2914 REDIR="n"
2915 fi
2916 if [ "$1" = "onetrack" ]; then
2917 echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
2918 else
2919 if [ -r "$CDDBDATA" ]; then
2920 getcddbinfo TRACKNAME
2921 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
2922 else
2923 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
2924 fi
2925 fi
2926 case "$CDROMREADERSYNTAX" in
2927 ### FIXME ### use an exception for flac, since it uses -o
2928 ### FIXME ### Shall we just use -o $FILEARG ??
2929 flac)
2930 # Avoid problems wit math expressions by unpadding the given UTRACKNUM
2931 STRIPTRACKNUM=$(expr $UTRACKNUM + 0)
2932 nice $READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
2933 cdparanoia)
2934 if [ "$REDIR" = "y" ]; then
2935 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2936 else
2937 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2938 fi;;
2939
2940 cdda2wav | icedax)
2941 if [ "$OSFLAVOUR" = "OSX" ] ; then
2942 # Hei, we have to unmount the device before running anything like cdda2wav/icedax in OSX
2943 diskutil unmount ${CDROM#/dev/} 0
2944 # Also, in OSX the cdrom device for cdda2wav/icedax changes...
2945 CDDA2WAVCDROM="IODVDServices"
2946 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2947 CDDA2WAVCDROM="$CDROMID"
2948 else
2949 if [ "$CDROMID" = "" ]; then
2950 CDDA2WAVCDROM="$CDROM"
2951 else
2952 CDDA2WAVCDROM="$CDROMID"
2953 fi
2954 fi
2955 if [ "$REDIR" = "y" ]; then
2956 nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2957 else
2958 nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2959 fi ;;
2960 ## FIXME ## We have an exception for dagrab, since it uses -f
2961 ## FIXME ## Shall we just use -f $FILEARG ??
2962 dagrab)
2963 if [ "$REDIR" = "y" ]; then
2964 nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" >&2
2965 else
2966 nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG"
2967 fi ;;
2968 cddafs)
2969 # Find the track's mounted path
2970 REALTRACKNUM=$(expr $UTRACKNUM + 0)
2971 FILEPATH=$(mount | grep "$CDROM on" | sed 's/^[^ ]* on \(.*\) (.*/\1/')
2972 FILEPATH=$(find "$FILEPATH" | grep "/$REALTRACKNUM ");
2973 # If the file exists, copy it
2974 if [ -e "$FILEPATH" ] ; then
2975 if [ "$REDIR" = "y" ]; then
2976 nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG" >&2
2977 else
2978 nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG"
2979 fi
2980 else
2981 false
2982 fi ;;
2983 debug)
2984 if [ "$REDIR" = "y" ]; then
2985 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" >&2
2986 else
2987 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG"
2988 fi ;;
2989 esac
2990 RETURN=$?
2991 # If we get some error or we get some missing wav
2992 # (as long as we dont use pipes)
2993 if [ "$RETURN" != "0" -o \( ! -s "$WAVDATA" -a X"$USEPIPES" != "Xy" \) ]; then
2994 # Thank goodness errors is only machine-parseable up to the
2995 # first colon, otherwise this woulda sucked
2996 if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
2997 RETURN=73 # fake a return code as cdparanoia return 0 also on aborted reads
2998 fi
2999 if [ "$USEPIPES" = "y" ]; then
3000 echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
3001 else
3002 echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
3003 fi
3004 return $RETURN
3005 else
3006 if [ "$USEPIPES" = "y" ]; then
3007 echo readencodetrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
3008 else
3009 echo readtrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
3010 fi
3011 if [ "$1" = "onetrack" ]; then
3012 echo onetrack >> "$ABCDETEMPDIR/status"
3013 fi
3014 fi
3015 }
3016
3017 # do_cdspeed
3018 # No values accepted, only uses env variables
3019 do_cdspeed ()
3020 {
3021 if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev/null ; then
3022 vecho "Setting CD speed to ${CDSPEEDVALUE}x"
3023 else
3024 echo "abcde: unable to set the device speed" >&2
3025 fi
3026 }
3027
3028 # vecho [message]
3029 #
3030 # vecho outputs a message if EXTRAVERBOSE is 1 or more
3031 vecho ()
3032 {
3033 if [ x"$EXTRAVERBOSE" != "x" ] && [ $EXTRAVERBOSE -gt 0 ] ; then
3034 case $1 in
3035 warning) shift ; log warning "$@" ;;
3036 *) echo "$@" ;;
3037 esac
3038 fi
3039 }
3040
3041 # vvecho [message]
3042 #
3043 # vvecho outputs a message if EXTRAVERBOSE is 2 or more
3044 vvecho ()
3045 {
3046 if [ x"$EXTRAVERBOSE" != "x" ] && [ $EXTRAVERBOSE -gt 1 ] ; then
3047 case $1 in
3048 warning) shift ; log warning "$@" ;;
3049 *) echo "$@" ;;
3050 esac
3051 fi
3052 }
3053
3054 # decho [message]
3055 #
3056 # decho outputs a debug message if DEBUG is selected
3057 decho ()
3058 {
3059 if [ x"$DEBUG" != "x" ]; then
3060 if echo $1 | grep "^\[" > /dev/null 2>&1 ; then
3061 DEBUGECHO=$(echo "$@" | tr -d '[]')
3062 echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
3063 else
3064 echo "[DEBUG] $1"
3065 fi
3066 fi
3067 }
3068
3069 # User-redefinable functions
3070 # Custom filename munging:
3071 mungefilename ()
3072 {
3073 #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
3074 echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
3075 }
3076
3077 # Custom genre munging:
3078 mungegenre ()
3079 {
3080 echo $CDGENRE | tr "[:upper:]" "[:lower:]"
3081 }
3082
3083 # pre_read
3084 # Empty pre_read function, to be defined in the configuration file.
3085 pre_read ()
3086 {
3087 :
3088 }
3089
3090 # post_read
3091 # Empty post_read function, to be defined in the configuration file.
3092 post_read ()
3093 {
3094 :
3095 }
3096
3097 # post_encode
3098 # Empty post_encode function, to be defined in the configuration file.
3099 post_encode ()
3100 {
3101 :
3102 }
3103
3104 ###############################################################################
3105 # End of functions
3106 #
3107 # Start of execution
3108 ###############################################################################
3109
3110 # Builtin defaults
3111
3112 # CDDB
3113 # Defaults to FreeDB, but musicbrainz can be used too, via the abcde-musicbrainz-tool script
3114 CDDBMETHOD=cddb
3115 CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
3116 CDDBSUBMIT=freedb-submit@freedb.org
3117 CDDBPROTO=6
3118 HELLOINFO="$(whoami)@$(hostname)"
3119 CDDBCOPYLOCAL="n"
3120 CDDBLOCALPOLICY="always"
3121 CDDBLOCALRECURSIVE="y"
3122 CDDBLOCALDIR="$HOME/.cddb"
3123 CDDBUSELOCAL="n"
3124
3125 # List of fields we parse and show during the CDDB parsing...
3126 SHOWCDDBFIELDS="year,genre"
3127
3128 INTERACTIVE=y
3129 #CDROMREADERSYNTAX=cdparanoia
3130 ENCODERSYNTAX=default
3131
3132 MP3ENCODERSYNTAX=default
3133 OGGENCODERSYNTAX=default
3134 FLACENCODERSYNTAX=default
3135 SPEEXENCODERSYNTAX=default
3136 MPPENCODERSYNTAX=default
3137 AACENCODERSYNTAX=default
3138 NORMALIZERSYNTAX=default
3139 CUEREADERSYNTAX=default
3140
3141 OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
3142 # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
3143 #VAOUTPUTFORMAT=${OUTPUTFORMAT}
3144 VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
3145 ONETRACKOUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
3146 VAONETRACKOUTPUTFORMAT='Various-${ALBUMFILE}/${ALBUMFILE}'
3147 PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
3148 PLAYLISTDATAPREFIX=''
3149 VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
3150 VAPLAYLISTDATAPREFIX=''
3151 DOSPLAYLIST=n
3152 COMMENT=''
3153 ID3TAGV=2
3154 ENCNICE=10
3155 READNICE=10
3156 DISTMP3NICE=10
3157 VARIOUSARTISTS=n
3158 VARIOUSARTISTSTYLE=forward
3159 KEEPWAVS=n
3160 PADTRACKS=n
3161 NOGAP=n
3162 BATCHNORM=n
3163 NOCDDBQUERY=n
3164
3165 # If using scsi devices, cdda2wav/icedax needs a CDROMID, instead of a device node
3166 # i.e. CDROMID="1,0,0"
3167 CDROMID=""
3168 # If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
3169 # If we are using the ide-scsi emulation layer, we need to define a "g"
3170 CDPARANOIACDROMBUS="d"
3171
3172 # program paths - defaults to checking your $PATH
3173 # mp3
3174 LAME=lame
3175 TOOLAME=toolame
3176 GOGO=gogo
3177 BLADEENC=bladeenc
3178 L3ENC=l3enc
3179 XINGMP3ENC=xingmp3enc
3180 MP3ENC=mp3enc
3181 # ogg
3182 VORBIZE=vorbize
3183 OGGENC=oggenc
3184 # flac
3185 FLAC=flac
3186 # speex
3187 SPEEXENC=speexenc
3188 # mpp (Musepack)
3189 MPPENC=mppenc
3190 # m4a
3191 AACENC=faac
3192
3193 ID3=id3
3194 ID3V2=id3v2
3195 EYED3=eyeD3
3196 VORBISCOMMENT=vorbiscomment
3197 METAFLAC=metaflac
3198 AACTAG=faac
3199 ATOMICPARSLEY=AtomicParsley
3200
3201 CDPARANOIA=cdparanoia
3202 CDDA2WAV=icedax
3203 DAGRAB=dagrab
3204 CDDAFS=cp
3205 CDDISCID=cd-discid
3206 CDDBTOOL=cddb-tool
3207 MUSICBRAINZ=abcde-musicbrainz-tool
3208 EJECT=eject
3209 MD5SUM=md5sum
3210 DISTMP3=distmp3
3211 NORMALIZE=normalize-audio
3212 CDSPEED=eject
3213 VORBISGAIN=vorbisgain
3214 MP3GAIN=mp3gain
3215 MPPGAIN=replaygain
3216 MKCUE=mkcue
3217 MKTOC=cdrdao
3218 DIFF=diff
3219 CUE2DISCID=builtin
3220
3221 # Options for programs called from abcde
3222 # mp3
3223 LAMEOPTS=
3224 TOOLAMEOPTS=
3225 GOGOOPTS=
3226 BLADEENCOPTS=
3227 L3ENCOPTS=
3228 XINGMP3ENCOPTS=
3229 MP3ENCOPTS=
3230 MP3GAINOPTS="-a -k"
3231 # ogg
3232 VORBIZEOPTS=
3233 OGGENCOPTS=
3234 VORBISGAINOPTS="--album"
3235 # flac
3236 FLACOPTS=
3237 FLACGAINOPTS="--add-replay-gain"
3238 # speex
3239 SPEEXENCOPTS=
3240 # mpc
3241 MPPENCOPTS=
3242 # m4a
3243 AACENCOPTS=
3244
3245 ID3OPTS=
3246 ID3V2OPTS=
3247 CDPARANOIAOPTS=
3248 CDDA2WAVOPTS=
3249 DAGRABOPTS=
3250 CDDAFSOPTS="-f"
3251 CDDBTOOLOPTS=
3252 EJECTOPTS=
3253 DISTMP3OPTS=
3254 NORMALIZEOPTS=
3255 CDSPEEDOPTS="-x"
3256 CDSPEEDVALUE=
3257 MKCUEOPTS=
3258 MKTOCOPTS=""
3259 VORBISCOMMENTOPTS="-R"
3260 METAFLACOPTS="--no-utf8-convert"
3261 DIFFOPTS=
3262
3263 # Default to one process if -j isn't specified
3264 MAXPROCS=1
3265
3266 # List of actions to perform - by default, run to completion
3267 ACTIONS=cddb,read,encode,tag,move,clean
3268
3269 # This option is basicaly for Debian package dependencies:
3270 # List of prefered outputs - by default, run with whatever we have in the path
3271 DEFAULT_OUTPUT_BINARIES=vorbis:oggenc,flac:flac,mp3:toolame,mp3:lame,mp3:bladeenc,spx:speex,m4a:faac
3272
3273 # List of prefered cdromreaders - by default, run whichever we have in the path
3274 DEFAULT_CDROMREADERS="cdparanoia icedax cdda2wav"
3275
3276 # List of quality levels associated with the encoders:
3277 DEFAULT_QUALITY_XLO="oggenc:-q -1,lame:-q 9,speex:--quality 1,m4a:"
3278 DEFAULT_QUALITY_LO="oggenc:-q 1,lame:-q 7,speex:--quality 5,m4a:"
3279 DEFAULT_QUALITY_HI="oggenc:-q 7,lame:--preset standard,speex:--quality 9,m4a:"
3280 DEFAULT_QUALITY_XHI="oggenc:-q 10,lame:--preset extreme,speex:--quality 10,m4a:"
3281
3282 # Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
3283 # Linux/OpenBSD. ftp is user for NetBSD.
3284 # Let's use these checkings to determine the OS flavour, which will be used
3285 # later
3286 if [ X$(uname) = "XFreeBSD" ] ; then
3287 HTTPGET=fetch
3288 MD5SUM=md5
3289 NEEDCDROMID=y
3290 OSFLAVOUR=FBSD
3291 elif [ X$(uname) = "XDarwin" ] ; then
3292 HTTPGET=curl
3293 OSFLAVOUR=OSX
3294 # We should have diskutil in OSX, but let's be sure...
3295 NEEDDISKUTIL=y
3296 CDROMREADERSYNTAX=cddafs
3297 elif [ X$(uname) = "XOpenBSD" ] ; then
3298 HTTPGET=wget
3299 MD5SUM=md5
3300 OSFLAVOUR=OBSD
3301 elif [ X$(uname) = "XNetBSD" ] ; then
3302 HTTPGET=ftp
3303 MD5SUM=md5
3304 OSFLAVOUR=NBSD
3305 elif [ X$(uname) = "SunOS" ] ; then
3306 HTTPGET=""
3307 MD5SUM=md5
3308 OSFLAVOUR=SunOS
3309 else
3310 HTTPGET=wget
3311 fi
3312
3313 # If CDDBAVAIL is set to n, no CDDB read is done
3314 # If USEID3 is set to n, no ID3 tagging is done
3315 CDDBAVAIL=y
3316 USEID3=y
3317 USEID3V2=y
3318
3319 # There we go..
3320 # But before we get into business, let us chop off any GREP environmental
3321 # variables.
3322 GREP_OPTIONS=""
3323 GREP_COLOR=""
3324
3325 if [ -z "$OUTPUTDIR" ]; then
3326 OUTPUTDIR=$(pwd)
3327 fi
3328
3329 if [ -z "$WAVOUTPUTDIR" ]; then
3330 WAVOUTPUTDIR="$OUTPUTDIR"
3331 fi
3332
3333 # Load system defaults
3334 if [ -r /etc/abcde.conf ]; then
3335 . /etc/abcde.conf
3336 fi
3337 # Load user preference defaults
3338 if [ -r $HOME/.abcde.conf ]; then
3339 . $HOME/.abcde.conf
3340 fi
3341
3342 # By this time, we need some HTTPGETOPTS already defined.
3343 # If the user has defined a non-default HTTPGET method, we should not be empty.
3344
3345 if [ "$HTTPGETOPTS" = "" ] ; then
3346 case $HTTPGET in
3347 wget) HTTPGETOPTS="-q -nv -e timestamping=off -O -";;
3348 curl) HTTPGETOPTS="-f -s";;
3349 fetch)HTTPGETOPTS="-q -o -";;
3350 ftp) HTTPGETOPTS="-a -V -o - ";;
3351 *) log warning "HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
3352 esac
3353 fi
3354
3355 # If the CDROM has not been set yet, find a suitable one.
3356 # If this is a devfs system, default to /dev/cdroms/cdrom0
3357 # instead of /dev/cdrom
3358 if [ "$CDROM" = "" ] ; then
3359 if [ -e /dev/cdroms/cdrom0 ]; then
3360 CDROM=/dev/cdroms/cdrom0
3361 elif [ -e /dev/cdrom ]; then
3362 CDROM=/dev/cdrom
3363 elif [ -e /dev/sr0 ]; then
3364 CDROM=/dev/sr0
3365 elif [ -e /dev/cd0c ]; then
3366 CDROM=/dev/cd0c
3367 elif [ -e /dev/acd0c ]; then
3368 CDROM=/dev/acd0c
3369 elif [ -e /dev/disk1 ]; then
3370 CDROM=/dev/disk1
3371 elif [ "$OSFLAVOUR" = "OSX" ] && [[ $(diskutil list) =~ CD_part.*(disk.)$'\n' ]]; then
3372 CDROM=/dev/${BASH_REMATCH[1]}
3373 fi
3374 fi
3375
3376 # We used to use EXTRAVERBOSE=y to turn on more debug output. Now
3377 # that's changed to a number to allow for more control. If
3378 # EXTRAVERBOSE=y, set it to 1 for backwards compatibility.
3379 if [ "$EXTRAVERBOSE" = "y" ]; then
3380 EXTRAVERBOSE=1
3381 fi
3382 if [ "$EXTRAVERBOSE" = "n" ]; then
3383 EXTRAVERBOSE=0
3384 fi
3385
3386 # Parse command line options
3387 #while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPq:r:Rs:S:t:T:vVxw:W: opt ; do
3388 while getopts 1a:bBc:C:d:Defghj:klLmMnNo:pPq:r:s:S:t:T:UvVxX:w:W:z opt ; do
3389 case "$opt" in
3390 1) ONETRACK=y ;;
3391 a) ACTIONS="$OPTARG" ;;
3392 A) EXPACTIONS="$OPTARG" ;;
3393 b) BATCHNORM=y ;;
3394 B) NOBATCHREPLAYGAIN=y ;;
3395 c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else log error "config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
3396 C) DISCID="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
3397 d) CDROM="$OPTARG" ;;
3398 D) set -x ;;
3399 h) usage; exit ;;
3400 e) ERASEENCODEDSTATUS=y ;;
3401 E) ENCODING="$OPTARG" ;;
3402 f) FORCE=y ;;
3403 g) NOGAP=y ;;
3404 i) INLINETAG=y ;;
3405 j) MAXPROCS="$OPTARG" ;;
3406 k) KEEPWAVS=y ;;
3407 l) LOWDISK=y ;;
3408 L) CDDBUSELOCAL=y ;;
3409 n) CDDBAVAIL=n ;;
3410 N) INTERACTIVE=n ;;
3411 m) DOSPLAYLIST=y ;;
3412 M) DOCUE=y ;;
3413 o) OUTPUTTYPE="$OPTARG" ;;
3414 p) PADTRACKS=y ;;
3415 P) USEPIPES=y ;;
3416 q) QUALITYLEVEL="$OPTARG" ;;
3417 r) REMOTEHOSTS="$OPTARG" ;;
3418 R) CDDBLOCALRECURSIVE=y ;;
3419 s) SHOWCDDBFIELDS="$OPTARG" ;;
3420 S) CDSPEEDVALUE="$OPTARG" ;;
3421 t) STARTTRACKNUMBER="$OPTARG" ;;
3422 T) STARTTRACKNUMBER="$OPTARG" ; STARTTRACKNUMBERTAG="y" ;;
3423 U) CDDBPROTO=5 ;;
3424 v)
3425 echo "This is abcde v$VERSION."
3426 echo "Usage: abcde [options] [tracks]"
3427 echo "abcde -h for extra help"
3428 exit
3429 ;;
3430 V) EXTRAVERBOSE=$(($EXTRAVERBOSE + 1)) ;;
3431 x) EJECTCD="y" ;;
3432 X) CUE2DISCID="$OPTARG" ;;
3433 w) COMMENT="$OPTARG" ;;
3434 W) if echo $OPTARG | grep "[[:digit:]]" > /dev/null 2>&1 ; then
3435 STARTTRACKNUMBER="${OPTARG}01"
3436 STARTTRACKNUMBERTAG="y"
3437 COMMENT="CD${OPTARG}"
3438 DISCNUMBER="${OPTARG}"
3439 else
3440 log error "argument of -W must be integer"
3441 exit 1
3442 fi
3443 ;;
3444 z) DEBUG=y ; CDROMREADERSYNTAX=debug ; EJECTCD="n" ;;
3445 ?) usage; exit ;;
3446 esac
3447 done
3448
3449 shift $(($OPTIND - 1))
3450
3451 # Here it comes the worse part of the whole thing. From here until we start
3452 # ripping, we have a mixture of sanity checks, verifications, default settigs
3453 # and other crazy stuff that interdepends, but hey, someone has to do it.
3454
3455 # If NOCDDBQUERY is set, don't query the CDDB server.
3456 if [ "$NOCDDBQUERY" = "y" ]; then
3457 CDDBAVAIL="n"
3458 fi
3459
3460 # If the user specified a flac file, then switch to special flac mode
3461 if echo "$CDROM" | grep -i '.flac$' > /dev/null 2>&1 ; then
3462 if [ ! -f "$CDROM" ]; then
3463 log error "the defined file for FLAC ripping cannot be found" >&2
3464 exit 1
3465 fi
3466 vecho warning "switching to flac CDROMREADERSYNTAX..."
3467 CDROMREADERSYNTAX=flac
3468 # We have a builtin version of cue2discid...
3469 case "$CUE2DISCID" in
3470 builtin);;
3471 *) NEEDCUE2DISCID=y;;
3472 esac
3473 NEEDMETAFLAC=y
3474 EJECTCD=n
3475 fi
3476
3477 # If the user provided a DISCID, disable eject
3478 if [ -n "$DISCID" ] || [ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD=n ; fi
3479
3480 # Check the available cd rippers in the system, from the ones we know.
3481 if [ "$CDROMREADERSYNTAX" = "" ]; then
3482 for DEFAULT_CDROMREADER in $DEFAULT_CDROMREADERS; do
3483 if new_checkexec $DEFAULT_CDROMREADER; then
3484 CDROMREADERSYNTAX=$DEFAULT_CDROMREADER
3485 break
3486 fi
3487 done
3488 if [ "$CDROMREADERSYNTAX" = "" ]; then
3489 log error "no cdreader found in your PATH"
3490 log error "hints: are all dependencies installed? has the \$PATH been modified?"
3491 exit 1
3492 fi
3493 fi
3494
3495 # Decide if we can continue.
3496 if [ "$ONETRACK" = "y" ]; then
3497 # FIXME # remove check as soon as we find out about the other readers
3498 case "$CDROMREADERSYNTAX" in
3499 flac) ;;
3500 cdparanoia) ;;
3501 cdda2wav | icedax) ;;
3502 *) log error "$CDROMREADERSYNTAX does not support ONETRACK mode"
3503 exit 1 ;;
3504 esac
3505 if [ "$BATCHNORM" = "y" ]; then
3506 log warning "BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
3507 BATCHNORM=n
3508 fi
3509 if [ "$NOGAP" = "y" ]; then
3510 log warning "NOGAP mode is not compatible with ONETRACK mode. Disabling..."
3511 NOGAP=n
3512 fi
3513 # It does not matter how many tracks we want. In ONETRACK mode we grab them all
3514 # FIXME # allow ranges of tracks to be selected for onetrack ripping
3515 if [ $# -gt 0 ]; then
3516 log warning "ONETRACK mode selected, grabbing all tracks..."
3517 fi
3518 else
3519 while [ $# -gt 0 ]; do
3520 # Range parsing code courtesy of Vincent Ho
3521 # Cleaned up to use shell built-ins by Charles Steinkuehler
3522 if [ "${1#*[^0-9-]}" != "$1" ]; then
3523 log error "syntax error while processing track numbers ($1)"
3524 exit 1
3525 else
3526 RSTART=${1%%-*}
3527 REND=${1##*-}
3528 while [ ${RSTART:=1} -le ${REND:=0} ] ; do
3529 TRACKQUEUE="$TRACKQUEUE $RSTART"
3530 RSTART=$(( $RSTART + 1 ))
3531 done
3532 fi
3533 shift
3534 done
3535 fi
3536
3537 # List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
3538 # List of experimental actions: retag,transcode
3539
3540 # Determine what actions are to be done from $ACTIONS and set the
3541 # following environment variables for them:
3542 DOCDDB=n
3543 DOREAD=n
3544 DONORMALIZE=n
3545 DOPREPROCESS=n
3546 DOENCODE=n
3547 DOPOSTPROCESS=n
3548 DOTAG=n
3549 DOMOVE=n
3550 DOREPLAYGAIN=n
3551 DOPLAYLIST=n
3552 DOCLEAN=n
3553 ## FIXME ## Lets keep compatibility with -M
3554 [ "$DOCUE" != "y" ] && DOCUE=n
3555
3556 for ACTION in $(echo $ACTIONS | tr , \ )
3557 do
3558 case $ACTION in
3559 default) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOCLEAN=y;;
3560 cue) DOCUE=y ; MAKECUEFILE=y ;;
3561 cddb) DOCDDB=y;;
3562 read) DOREAD=y;;
3563 normalize) DONORMALIZE=y; DOREAD=y;;
3564 # preprocess) DOPREPROCESS=y; DOREAD=y;;
3565 encode) DOENCODE=y; DOREAD=y;;
3566 # postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
3567 tag) DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3568 move) DOMOVE=y; DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3569 replaygain) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOREPLAYGAIN=y;;
3570 playlist) DOCDDB=y; DOPLAYLIST=y;;
3571 clean) DOCLEAN=y;;
3572 esac
3573 done
3574
3575 if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
3576 # FIXME # should we abort on error or just inform the user?
3577 log warning "selected both normalize and replaygain actions"
3578 fi
3579
3580 for SHOWCDDBFIELD in $(echo $SHOWCDDBFIELDS | tr , \ ); do
3581 case $SHOWCDDBFIELD in
3582 y*|Y*) SHOWCDDBYEAR="y";;
3583 g*|G*) SHOWCDDBGENRE="y";;
3584 *) ;;
3585 esac
3586 done
3587
3588 # At this point a CDROM has to be defined, so we check it exists.
3589 if [ X"$CDROM" != "X" ] ; then
3590 if ( [ "$CDROMREADERSYNTAX" = "cdda2wav" ] || [ "$CDROMREADERSYNTAX" = "icedax" ] ) && [ "$NEEDCDROMID" = "y" ] ; then
3591 if [ "$OSFLAVOUR" = "FBSD" ]; then
3592 if echo "$CDROMID" | grep "^[0-9],[0-9],[0-9]$" >/dev/null 2>&1 ; then :; else
3593 log error "CDROMID not in the right format for $CDROMREADERSYNTAX"
3594 log error "Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
3595 exit 1
3596 fi
3597 fi
3598 elif [ ! -e "$CDROM" -a X"$DOREAD" = "Xy" ]; then
3599 log error "CDROM device cannot be found."
3600 exit 1
3601 fi
3602 # avoid processing if we are not going to hit the CDROM.
3603 elif [ X"$DOREAD" = "Xy" ]; then
3604 log error "CDROM has not been defined or cannot be found"
3605 exit 1
3606 fi
3607
3608 # USEPIPES pre-tests, before we get into more serious stuff
3609 # Not compatible with:
3610 # - multiple outputs
3611 # - normalize
3612 # - lowdisk algorithm
3613 # - anything else?
3614 if [ X"$USEPIPES" = "Xy" ]; then
3615 if [ $(echo "$OUTPUTTYPE" | tr , \ | wc -w ) -gt 1 ]; then
3616 log error "Unix pipes not compatible with multiple outputs"
3617 exit 1
3618 fi
3619 if [ X"$DONORMALIZE" = "Xy" ]; then
3620 log error "Unix pipes not compatible with normalizer"
3621 # FIXME # Do we need to exit or shall we just disable the mode?
3622 exit 1