Jim Morris [Sun, 4 May 2014 02:22:54 +0000 (19:22 -0700)]
Merge pull request #391 from wolfmanjm/upstreamedge
Add K option to G32 to use current endstop trims when probing ratherthan...
Jim Morris [Sun, 4 May 2014 02:20:04 +0000 (19:20 -0700)]
Add K option to G32 to use current endstop trims when probing ratherthan zero them and re calibrate
Jim Morris [Sat, 3 May 2014 20:29:59 +0000 (13:29 -0700)]
Update config
Jim Morris [Sat, 3 May 2014 05:54:18 +0000 (22:54 -0700)]
Merge pull request #390 from wolfmanjm/upstreamedge
have M910 turn on motors
Jim Morris [Sat, 3 May 2014 05:53:01 +0000 (22:53 -0700)]
have M910 turn on motors
Jim Morris [Fri, 2 May 2014 03:12:17 +0000 (20:12 -0700)]
update FirmwareBin/firmware.bin to latest edge
Jim Morris [Wed, 30 Apr 2014 06:29:37 +0000 (23:29 -0700)]
Merge pull request #388 from wolfmanjm/upstreamedge
use regular move for intial move down from home in zprobe
Jim Morris [Wed, 30 Apr 2014 06:27:02 +0000 (23:27 -0700)]
use regular move for intial move down from home in zprobe
Jim Morris [Mon, 28 Apr 2014 22:25:28 +0000 (15:25 -0700)]
Update config
Jim Morris [Mon, 28 Apr 2014 22:15:57 +0000 (15:15 -0700)]
Update config
Jim Morris [Mon, 28 Apr 2014 04:47:03 +0000 (21:47 -0700)]
Merge pull request #386 from wolfmanjm/upstreamedge
refactor endstops and zprobe to not use config steps/mm but to use live ...
Jim Morris [Mon, 28 Apr 2014 04:19:13 +0000 (21:19 -0700)]
refactor endstops and zprobe to not use config steps/mm but to use live value instead
clean up endstops ugly code
add I parameter to G32 to set the accuracy
Jim Morris [Sun, 27 Apr 2014 04:30:24 +0000 (21:30 -0700)]
Update config
Jim Morris [Sun, 27 Apr 2014 04:27:33 +0000 (21:27 -0700)]
Update config
Jim Morris [Sat, 26 Apr 2014 23:41:46 +0000 (16:41 -0700)]
Merge pull request #385 from wolfmanjm/upstreamedge
Added auto delta radius calibration to G32
Jim Morris [Sat, 26 Apr 2014 23:39:36 +0000 (16:39 -0700)]
Added auto delta radius calibration to G32
Jim Morris [Sat, 26 Apr 2014 04:52:39 +0000 (21:52 -0700)]
Merge pull request #384 from wolfmanjm/feature/auto-delta-calibration
Feature/auto delta calibration
Jim Morris [Sat, 26 Apr 2014 04:46:21 +0000 (21:46 -0700)]
Added G32 to autocalibrate delta endstops
Optimized Vector3 and added a few useful functions
cleanup kossel
play comamnd should display ok and other output if -v is specified on play command
Jim Morris [Sat, 26 Apr 2014 04:35:16 +0000 (21:35 -0700)]
Merge remote-tracking branch 'upstream/edge' into upstreamedge
Jim Morris [Thu, 24 Apr 2014 19:40:54 +0000 (12:40 -0700)]
Added prebuilt binary
Jim Morris [Thu, 24 Apr 2014 08:00:19 +0000 (01:00 -0700)]
Update Endstops.cpp
make debounce count 100 the default again
Jim Morris [Tue, 22 Apr 2014 08:34:56 +0000 (01:34 -0700)]
Merge remote-tracking branch 'upstream/edge' into upstreamedge
Jim Morris [Tue, 22 Apr 2014 08:33:00 +0000 (01:33 -0700)]
clean up some more headers files
move printf implementation out of steamoutput header
Jim Morris [Mon, 21 Apr 2014 22:49:35 +0000 (15:49 -0700)]
Merge pull request #378 from hakalan/thermocouple
Support for MAX31855 thermocouple
Jim Morris [Mon, 21 Apr 2014 06:43:29 +0000 (23:43 -0700)]
Merge pull request #382 from wolfmanjm/upstreamedge
Save arm specific options with M500 disspaly with M503
Jim Morris [Mon, 21 Apr 2014 06:40:09 +0000 (23:40 -0700)]
Save arm specific options with M500 disspaly with M503
change the arm solution options to a map, and optimize how they are set and get
add delta knowledge to z probe so deltas can be probed
Jim Morris [Sun, 20 Apr 2014 20:53:15 +0000 (13:53 -0700)]
Merge pull request #381 from wolfmanjm/upstreamedge
Add Z probe to M119
Jim Morris [Sun, 20 Apr 2014 20:51:04 +0000 (13:51 -0700)]
Add Z probe to M119
Change G30 to return to originalpostion after probe
G30 Znnn will stop probe on hit and set Z to nnn
Jim Morris [Sun, 20 Apr 2014 09:31:50 +0000 (02:31 -0700)]
Merge pull request #380 from wolfmanjm/feature/z-probe
Added G30 simple Z probe, will probe for Z at current XY and report how ...
Jim Morris [Sun, 20 Apr 2014 09:29:49 +0000 (02:29 -0700)]
Added G30 simple Z probe, will probe for Z at current XY and report how far the probe moved down
hakalan [Fri, 18 Apr 2014 22:42:02 +0000 (00:42 +0200)]
Added buffer for averaging of measurements to improve PID robustness.
Also ignore occasional failed measurements from the thermocouple.
Formatting changes.
Jim Morris [Wed, 16 Apr 2014 08:34:08 +0000 (01:34 -0700)]
Merge pull request #377 from wolfmanjm/upstreamedge
Only report long lines in config if not truncating a comment
Jim Morris [Wed, 16 Apr 2014 08:30:06 +0000 (01:30 -0700)]
Only report long lines in config if not truncating a comment
report the line number the long line is on
Add a DEFAULT_SERIAL_BAUD_RATE define to src/makefile to set the default baud rate used when config has not yet been loaded
Jim Morris [Wed, 16 Apr 2014 03:08:33 +0000 (20:08 -0700)]
Merge pull request #376 from wolfmanjm/upstreamedge
fix case where mri is not loaded for serial.
Jim Morris [Wed, 16 Apr 2014 03:07:29 +0000 (20:07 -0700)]
fix case where mri is not loaded for serial.
Jim Morris [Wed, 16 Apr 2014 03:02:50 +0000 (20:02 -0700)]
Merge pull request #375 from powertomato/uart_sel_for_release_fix
Uart sel for release fix
powertomato [Wed, 16 Apr 2014 02:33:39 +0000 (04:33 +0200)]
Changed tabs to spaces
powertomato [Wed, 16 Apr 2014 02:27:51 +0000 (04:27 +0200)]
For release builds MRI is not enabled, and the selection wouldn't work. This is a patch for it
hakla [Tue, 15 Apr 2014 08:42:41 +0000 (10:42 +0200)]
Changed config parameter name.
Jim Morris [Tue, 15 Apr 2014 05:57:13 +0000 (22:57 -0700)]
Merge pull request #374 from wolfmanjm/upstreamedge
CHanged the universal panel adapters protocol
Jim Morris [Tue, 15 Apr 2014 05:55:11 +0000 (22:55 -0700)]
CHanged the universal panel adapters protocol
hakla [Mon, 14 Apr 2014 20:25:03 +0000 (22:25 +0200)]
Some error handling cleanup.
hakla [Mon, 14 Apr 2014 19:34:20 +0000 (21:34 +0200)]
Limit SPI transaction to 16 bits.
hakla [Mon, 14 Apr 2014 18:21:48 +0000 (20:21 +0200)]
Support max31855 thermocouple over spi.
Jim Morris [Mon, 14 Apr 2014 06:59:27 +0000 (23:59 -0700)]
Merge pull request #372 from wolfmanjm/fix/universal-panel-adapter
improve SPI communications with panel adapter
Jim Morris [Mon, 14 Apr 2014 06:58:13 +0000 (23:58 -0700)]
improve SPI communications with panel adapter
Jim Morris [Sun, 13 Apr 2014 19:39:22 +0000 (12:39 -0700)]
Merge pull request #371 from wolfmanjm/upstreamedge
make M114 output match Marlin
Jim Morris [Sun, 13 Apr 2014 19:37:33 +0000 (12:37 -0700)]
make M114 output match Marlin
Logxen [Sun, 13 Apr 2014 11:15:14 +0000 (04:15 -0700)]
edited ConfigSamples readme to reflect removal of Rostock style samples
Jim Morris [Sun, 13 Apr 2014 08:47:00 +0000 (01:47 -0700)]
Update config
Jim Morris [Sun, 13 Apr 2014 08:46:06 +0000 (01:46 -0700)]
Update config
Jim Morris [Sun, 13 Apr 2014 08:45:36 +0000 (01:45 -0700)]
Update config
Jim Morris [Sun, 13 Apr 2014 08:44:20 +0000 (01:44 -0700)]
Update config
Jim Morris [Sat, 12 Apr 2014 23:16:11 +0000 (16:16 -0700)]
Create Readme.md
Jim Morris [Sat, 12 Apr 2014 20:04:55 +0000 (13:04 -0700)]
Merge pull request #370 from wolfmanjm/upstreamedge
update kossel config
Jim Morris [Sat, 12 Apr 2014 20:03:10 +0000 (13:03 -0700)]
update kossel config
Jim Morris [Sat, 12 Apr 2014 19:49:42 +0000 (12:49 -0700)]
Delete config
Jim Morris [Sat, 12 Apr 2014 10:07:54 +0000 (03:07 -0700)]
Merge pull request #368 from wolfmanjm/add/universal-panel-adapter
Add/universal panel adapter
Jim Morris [Sat, 12 Apr 2014 10:03:57 +0000 (03:03 -0700)]
Tune the encoder polling frequency for intelligent panels
fix the encoder resolution so deltas other than 1 can be handled
Jim Morris [Sat, 12 Apr 2014 05:01:53 +0000 (22:01 -0700)]
Merge remote-tracking branch 'upstream/edge' into add/universal-panel-adapter
Jim Morris [Sat, 12 Apr 2014 04:49:29 +0000 (21:49 -0700)]
Merge pull request #367 from wolfmanjm/optimize/config-cache-use-vector
Optimize/config cache use vector
Jim Morris [Sat, 12 Apr 2014 04:35:31 +0000 (21:35 -0700)]
replace map with vector as map uses double the amount of memory and no signficant speed increase
clean up some morev stuff in config
added md5 for possible future use
Jim Morris [Sat, 12 Apr 2014 03:54:36 +0000 (20:54 -0700)]
use map for config cache
Jim Morris [Fri, 11 Apr 2014 22:39:10 +0000 (15:39 -0700)]
clean up config-cache so it can encapsulate different storage mechanisms
fix various config realted bugs along the way
Jim Morris [Fri, 11 Apr 2014 05:40:40 +0000 (22:40 -0700)]
Merge remote-tracking branch 'upstream/edge' into add/universal-panel-adapter
Jim Morris [Fri, 11 Apr 2014 00:41:35 +0000 (17:41 -0700)]
Merge pull request #365 from wolfmanjm/fix/config-set
Fix get_checksums() to not need a terminating space
Jim Morris [Fri, 11 Apr 2014 00:37:12 +0000 (17:37 -0700)]
Fix get_checksums() to not need a terminating space
remove the append(" ") to checksum generation
fix config-set and allow it to append new key/vlaues to config file
Jim Morris [Thu, 10 Apr 2014 08:58:56 +0000 (01:58 -0700)]
Merge pull request #364 from wolfmanjm/fix/config-tighten-up
Fix/config tighten up
Jim Morris [Thu, 10 Apr 2014 08:55:58 +0000 (01:55 -0700)]
Fix some bugs
regain 4k by not using fstream
shorten lines in config example
max config line is now 132, it is truncated if longer
Jim Morris [Thu, 10 Apr 2014 07:33:14 +0000 (00:33 -0700)]
clean up config parsing, make more robust
clean up config code in general
in kernel setup serial before config so we can print errors to serial console
Jim Morris [Thu, 10 Apr 2014 03:38:45 +0000 (20:38 -0700)]
speed up encoder tick
Jim Morris [Wed, 9 Apr 2014 09:05:33 +0000 (02:05 -0700)]
enable led for fan
more tweaks, still getting spurious encoder clicks
Jim Morris [Wed, 9 Apr 2014 04:28:09 +0000 (21:28 -0700)]
more tweaks
Jim Morris [Wed, 9 Apr 2014 00:26:56 +0000 (17:26 -0700)]
fine tune, handle busy signal
limit size of packet
Jim Morris [Tue, 8 Apr 2014 10:42:10 +0000 (03:42 -0700)]
added busy wait
Jim Morris [Tue, 8 Apr 2014 09:10:12 +0000 (02:10 -0700)]
tweak with delays
Jim Morris [Mon, 7 Apr 2014 11:33:30 +0000 (04:33 -0700)]
Add Universal Panel Adapter driver to panels
Jim Morris [Fri, 4 Apr 2014 22:09:10 +0000 (15:09 -0700)]
Update config
Jim Morris [Fri, 4 Apr 2014 06:08:20 +0000 (23:08 -0700)]
Update config
Jim Morris [Fri, 4 Apr 2014 06:03:41 +0000 (23:03 -0700)]
Merge pull request #362 from wolfmanjm/upstreamedge
update samp;le config for X5 with rrd panel setup
Jim Morris [Fri, 4 Apr 2014 06:02:38 +0000 (23:02 -0700)]
update samp;le config for X5 with rrd panel setup
Jim Morris [Thu, 3 Apr 2014 22:37:22 +0000 (15:37 -0700)]
Merge pull request #361 from wolfmanjm/upstreamedge
fix response to M27 when paused
Jim Morris [Thu, 3 Apr 2014 22:36:05 +0000 (15:36 -0700)]
fix response to M27 when paused
Jim Morris [Thu, 3 Apr 2014 20:09:31 +0000 (13:09 -0700)]
Merge pull request #360 from wolfmanjm/upstreamedge
Fix issues with using Mxx to play/pause SD files
Jim Morris [Thu, 3 Apr 2014 20:07:34 +0000 (13:07 -0700)]
Fix issues with using Mxx to play/pause SD files
properly cleanup if sd print was paused and abort is issued
Jim Morris [Wed, 2 Apr 2014 05:08:24 +0000 (22:08 -0700)]
Merge pull request #359 from wolfmanjm/upstreamedge
Fix positive trim values for delta M666, cleanup various header files
Jim Morris [Wed, 2 Apr 2014 05:06:50 +0000 (22:06 -0700)]
cleanup temperaturecontrol header file
Jim Morris [Wed, 2 Apr 2014 05:03:05 +0000 (22:03 -0700)]
Cleanup headers in SimpleShell
Jim Morris [Wed, 2 Apr 2014 04:58:55 +0000 (21:58 -0700)]
Fix positive trim values for delta M666
Cleanup includes in PID autotuner
use fgets in play rather than reading one character at a time, optimization
Jim Morris [Tue, 1 Apr 2014 18:10:09 +0000 (11:10 -0700)]
Merge pull request #358 from wolfmanjm/upstreamedge
change Switch pwm_output config to output_type pwm or digital
Jim Morris [Tue, 1 Apr 2014 18:08:02 +0000 (11:08 -0700)]
change Switch pwm_output confin to output_type pwm or digital
Jim Morris [Tue, 1 Apr 2014 08:03:56 +0000 (01:03 -0700)]
Merge pull request #357 from wolfmanjm/upstreamedge
attempt to fix pwm switch putput pins
Jim Morris [Tue, 1 Apr 2014 08:00:55 +0000 (01:00 -0700)]
attempt to fix pwm switch putput pins
added max_pwm config setting for the output pin
Turning pin on without an S parameter sets it to full on (max_pwm) rather than last setting, same as Marlin
Jim Morris [Tue, 1 Apr 2014 06:01:19 +0000 (23:01 -0700)]
Merge pull request #356 from wolfmanjm/upstreamedge
Fix some Switch issues
Jim Morris [Tue, 1 Apr 2014 05:59:04 +0000 (22:59 -0700)]
fix toggle/momentary input switches
Jim Morris [Tue, 1 Apr 2014 05:48:14 +0000 (22:48 -0700)]
fix on_set_public_data for Switch
Jim Morris [Tue, 1 Apr 2014 05:35:28 +0000 (22:35 -0700)]
Merge pull request #355 from wolfmanjm/upstreamedge
on panel Only show fan icon if fan is on
Jim Morris [Tue, 1 Apr 2014 05:33:44 +0000 (22:33 -0700)]
on panel Only show fan icon if fan is on
Jim Morris [Mon, 31 Mar 2014 20:00:10 +0000 (13:00 -0700)]
Merge pull request #354 from wolfmanjm/upstreamedge
fix bang bang on/off bug
Jim Morris [Mon, 31 Mar 2014 19:58:43 +0000 (12:58 -0700)]
fix bang bang on/off bug