Commit | Line | Data |
---|---|---|
df27a6a3 | 1 | /* |
aab6cbba | 2 | This file is part of Smoothie (http://smoothieware.org/). The motion control part is heavily based on Grbl (https://github.com/simen/grbl) with additions from Sungeun K. Jeon (https://github.com/chamnit/grbl) |
4cff3ded AW |
3 | Smoothie is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. |
4 | Smoothie is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. | |
df27a6a3 | 5 | You should have received a copy of the GNU General Public License along with Smoothie. If not, see <http://www.gnu.org/licenses/>. |
4cff3ded AW |
6 | */ |
7 | ||
8 | #include "libs/Module.h" | |
9 | #include "libs/Kernel.h" | |
5673fe39 MM |
10 | |
11 | #include <math.h> | |
4cff3ded AW |
12 | #include <string> |
13 | using std::string; | |
5673fe39 | 14 | |
4cff3ded | 15 | #include "Planner.h" |
3fceb8eb | 16 | #include "Conveyor.h" |
4cff3ded | 17 | #include "Robot.h" |
5673fe39 MM |
18 | #include "nuts_bolts.h" |
19 | #include "Pin.h" | |
20 | #include "StepperMotor.h" | |
21 | #include "Gcode.h" | |
5647f709 | 22 | #include "PublicDataRequest.h" |
4cff3ded AW |
23 | #include "arm_solutions/BaseSolution.h" |
24 | #include "arm_solutions/CartesianSolution.h" | |
c41d6d95 | 25 | #include "arm_solutions/RotatableCartesianSolution.h" |
4e04bcd3 | 26 | #include "arm_solutions/RostockSolution.h" |
2c7ab192 | 27 | #include "arm_solutions/JohannKosselSolution.h" |
bdaaa75d | 28 | #include "arm_solutions/HBotSolution.h" |
61134a65 | 29 | #include "StepTicker.h" |
4cff3ded | 30 | |
78d0e16a MM |
31 | #define default_seek_rate_checksum CHECKSUM("default_seek_rate") |
32 | #define default_feed_rate_checksum CHECKSUM("default_feed_rate") | |
33 | #define mm_per_line_segment_checksum CHECKSUM("mm_per_line_segment") | |
34 | #define delta_segments_per_second_checksum CHECKSUM("delta_segments_per_second") | |
35 | #define mm_per_arc_segment_checksum CHECKSUM("mm_per_arc_segment") | |
36 | #define arc_correction_checksum CHECKSUM("arc_correction") | |
37 | #define x_axis_max_speed_checksum CHECKSUM("x_axis_max_speed") | |
38 | #define y_axis_max_speed_checksum CHECKSUM("y_axis_max_speed") | |
39 | #define z_axis_max_speed_checksum CHECKSUM("z_axis_max_speed") | |
43424972 JM |
40 | |
41 | // arm solutions | |
78d0e16a MM |
42 | #define arm_solution_checksum CHECKSUM("arm_solution") |
43 | #define cartesian_checksum CHECKSUM("cartesian") | |
44 | #define rotatable_cartesian_checksum CHECKSUM("rotatable_cartesian") | |
45 | #define rostock_checksum CHECKSUM("rostock") | |
46 | #define delta_checksum CHECKSUM("delta") | |
47 | #define hbot_checksum CHECKSUM("hbot") | |
48 | #define corexy_checksum CHECKSUM("corexy") | |
49 | #define kossel_checksum CHECKSUM("kossel") | |
50 | ||
51 | // stepper motor stuff | |
52 | #define alpha_step_pin_checksum CHECKSUM("alpha_step_pin") | |
53 | #define beta_step_pin_checksum CHECKSUM("beta_step_pin") | |
54 | #define gamma_step_pin_checksum CHECKSUM("gamma_step_pin") | |
55 | #define alpha_dir_pin_checksum CHECKSUM("alpha_dir_pin") | |
56 | #define beta_dir_pin_checksum CHECKSUM("beta_dir_pin") | |
57 | #define gamma_dir_pin_checksum CHECKSUM("gamma_dir_pin") | |
58 | #define alpha_en_pin_checksum CHECKSUM("alpha_en_pin") | |
59 | #define beta_en_pin_checksum CHECKSUM("beta_en_pin") | |
60 | #define gamma_en_pin_checksum CHECKSUM("gamma_en_pin") | |
a84f0186 | 61 | |
78d0e16a MM |
62 | #define alpha_steps_per_mm_checksum CHECKSUM("alpha_steps_per_mm") |
63 | #define beta_steps_per_mm_checksum CHECKSUM("beta_steps_per_mm") | |
64 | #define gamma_steps_per_mm_checksum CHECKSUM("gamma_steps_per_mm") | |
65 | ||
df6a30f2 MM |
66 | #define alpha_max_rate_checksum CHECKSUM("alpha_max_rate") |
67 | #define beta_max_rate_checksum CHECKSUM("beta_max_rate") | |
68 | #define gamma_max_rate_checksum CHECKSUM("gamma_max_rate") | |
69 | ||
70 | ||
78d0e16a MM |
71 | // new-style actuator stuff |
72 | #define actuator_checksum CHEKCSUM("actuator") | |
73 | ||
74 | #define step_pin_checksum CHECKSUM("step_pin") | |
75 | #define dir_pin_checksum CHEKCSUM("dir_pin") | |
76 | #define en_pin_checksum CHECKSUM("en_pin") | |
77 | ||
78 | #define steps_per_mm_checksum CHECKSUM("steps_per_mm") | |
df6a30f2 | 79 | #define max_rate_checksum CHECKSUM("max_rate") |
78d0e16a MM |
80 | |
81 | #define alpha_checksum CHECKSUM("alpha") | |
82 | #define beta_checksum CHECKSUM("beta") | |
83 | #define gamma_checksum CHECKSUM("gamma") | |
84 | ||
43424972 | 85 | |
edac9072 AW |
86 | // The Robot converts GCodes into actual movements, and then adds them to the Planner, which passes them to the Conveyor so they can be added to the queue |
87 | // It takes care of cutting arcs into segments, same thing for line that are too long | |
41fd89e0 | 88 | #define max(a,b) (((a) > (b)) ? (a) : (b)) |
edac9072 | 89 | |
4cff3ded | 90 | Robot::Robot(){ |
a1b7e9f0 | 91 | this->inch_mode = false; |
0e8b102e | 92 | this->absolute_mode = true; |
df27a6a3 | 93 | this->motion_mode = MOTION_MODE_SEEK; |
4cff3ded | 94 | this->select_plane(X_AXIS, Y_AXIS, Z_AXIS); |
df27a6a3 | 95 | clear_vector(this->last_milestone); |
0b804a41 | 96 | this->arm_solution = NULL; |
da947c62 | 97 | seconds_per_minute = 60.0F; |
4cff3ded AW |
98 | } |
99 | ||
100 | //Called when the module has just been loaded | |
101 | void Robot::on_module_loaded() { | |
476dcb96 | 102 | register_for_event(ON_CONFIG_RELOAD); |
4cff3ded | 103 | this->register_for_event(ON_GCODE_RECEIVED); |
b55cfff1 JM |
104 | this->register_for_event(ON_GET_PUBLIC_DATA); |
105 | this->register_for_event(ON_SET_PUBLIC_DATA); | |
4cff3ded AW |
106 | |
107 | // Configuration | |
da24d6ae AW |
108 | this->on_config_reload(this); |
109 | } | |
110 | ||
111 | void Robot::on_config_reload(void* argument){ | |
5984acdf | 112 | |
edac9072 AW |
113 | // Arm solutions are used to convert positions in millimeters into position in steps for each stepper motor. |
114 | // While for a cartesian arm solution, this is a simple multiplication, in other, less simple cases, there is some serious math to be done. | |
115 | // To make adding those solution easier, they have their own, separate object. | |
5984acdf | 116 | // Here we read the config to find out which arm solution to use |
0b804a41 | 117 | if (this->arm_solution) delete this->arm_solution; |
314ab8f7 | 118 | int solution_checksum = get_checksum(THEKERNEL->config->value(arm_solution_checksum)->by_default("cartesian")->as_string()); |
d149c730 | 119 | // Note checksums are not const expressions when in debug mode, so don't use switch |
98761c28 | 120 | if(solution_checksum == hbot_checksum || solution_checksum == corexy_checksum) { |
314ab8f7 | 121 | this->arm_solution = new HBotSolution(THEKERNEL->config); |
bdaaa75d L |
122 | |
123 | }else if(solution_checksum == rostock_checksum) { | |
314ab8f7 | 124 | this->arm_solution = new RostockSolution(THEKERNEL->config); |
73a4e3c0 | 125 | |
2c7ab192 | 126 | }else if(solution_checksum == kossel_checksum) { |
314ab8f7 | 127 | this->arm_solution = new JohannKosselSolution(THEKERNEL->config); |
2c7ab192 | 128 | |
d149c730 | 129 | }else if(solution_checksum == delta_checksum) { |
4a0c8e14 | 130 | // place holder for now |
314ab8f7 | 131 | this->arm_solution = new RostockSolution(THEKERNEL->config); |
73a4e3c0 | 132 | |
b73a756d | 133 | }else if(solution_checksum == rotatable_cartesian_checksum) { |
314ab8f7 | 134 | this->arm_solution = new RotatableCartesianSolution(THEKERNEL->config); |
b73a756d | 135 | |
d149c730 | 136 | }else if(solution_checksum == cartesian_checksum) { |
314ab8f7 | 137 | this->arm_solution = new CartesianSolution(THEKERNEL->config); |
73a4e3c0 | 138 | |
d149c730 | 139 | }else{ |
314ab8f7 | 140 | this->arm_solution = new CartesianSolution(THEKERNEL->config); |
d149c730 | 141 | } |
73a4e3c0 | 142 | |
0b804a41 | 143 | |
da947c62 MM |
144 | this->feed_rate = THEKERNEL->config->value(default_feed_rate_checksum )->by_default( 100.0F)->as_number(); |
145 | this->seek_rate = THEKERNEL->config->value(default_seek_rate_checksum )->by_default( 100.0F)->as_number(); | |
146 | this->mm_per_line_segment = THEKERNEL->config->value(mm_per_line_segment_checksum )->by_default( 0.0F)->as_number(); | |
1ad23cd3 | 147 | this->delta_segments_per_second = THEKERNEL->config->value(delta_segments_per_second_checksum )->by_default(0.0f )->as_number(); |
da947c62 MM |
148 | this->mm_per_arc_segment = THEKERNEL->config->value(mm_per_arc_segment_checksum )->by_default( 0.5f)->as_number(); |
149 | this->arc_correction = THEKERNEL->config->value(arc_correction_checksum )->by_default( 5 )->as_number(); | |
78d0e16a | 150 | |
c9ed779d MM |
151 | this->max_speeds[X_AXIS] = THEKERNEL->config->value(x_axis_max_speed_checksum )->by_default(60000.0F)->as_number() / 60.0F; |
152 | this->max_speeds[Y_AXIS] = THEKERNEL->config->value(y_axis_max_speed_checksum )->by_default(60000.0F)->as_number() / 60.0F; | |
153 | this->max_speeds[Z_AXIS] = THEKERNEL->config->value(z_axis_max_speed_checksum )->by_default( 300.0F)->as_number() / 60.0F; | |
feb204be | 154 | |
78d0e16a MM |
155 | Pin alpha_step_pin; |
156 | Pin alpha_dir_pin; | |
157 | Pin alpha_en_pin; | |
158 | Pin beta_step_pin; | |
159 | Pin beta_dir_pin; | |
160 | Pin beta_en_pin; | |
161 | Pin gamma_step_pin; | |
162 | Pin gamma_dir_pin; | |
163 | Pin gamma_en_pin; | |
164 | ||
165 | alpha_step_pin.from_string( THEKERNEL->config->value(alpha_step_pin_checksum )->by_default("2.0" )->as_string())->as_output(); | |
166 | alpha_dir_pin.from_string( THEKERNEL->config->value(alpha_dir_pin_checksum )->by_default("0.5" )->as_string())->as_output(); | |
167 | alpha_en_pin.from_string( THEKERNEL->config->value(alpha_en_pin_checksum )->by_default("0.4" )->as_string())->as_output(); | |
168 | beta_step_pin.from_string( THEKERNEL->config->value(beta_step_pin_checksum )->by_default("2.1" )->as_string())->as_output(); | |
9c5fa39a MM |
169 | beta_dir_pin.from_string( THEKERNEL->config->value(beta_dir_pin_checksum )->by_default("0.11" )->as_string())->as_output(); |
170 | beta_en_pin.from_string( THEKERNEL->config->value(beta_en_pin_checksum )->by_default("0.10" )->as_string())->as_output(); | |
78d0e16a MM |
171 | gamma_step_pin.from_string( THEKERNEL->config->value(gamma_step_pin_checksum )->by_default("2.2" )->as_string())->as_output(); |
172 | gamma_dir_pin.from_string( THEKERNEL->config->value(gamma_dir_pin_checksum )->by_default("0.20" )->as_string())->as_output(); | |
173 | gamma_en_pin.from_string( THEKERNEL->config->value(gamma_en_pin_checksum )->by_default("0.19" )->as_string())->as_output(); | |
78d0e16a | 174 | |
a84f0186 MM |
175 | float steps_per_mm[3] = { |
176 | THEKERNEL->config->value(alpha_steps_per_mm_checksum)->by_default( 80.0F)->as_number(), | |
177 | THEKERNEL->config->value(beta_steps_per_mm_checksum )->by_default( 80.0F)->as_number(), | |
178 | THEKERNEL->config->value(gamma_steps_per_mm_checksum)->by_default(2560.0F)->as_number(), | |
179 | }; | |
180 | ||
78d0e16a MM |
181 | // TODO: delete or detect old steppermotors |
182 | // Make our 3 StepperMotors | |
9c5fa39a MM |
183 | this->alpha_stepper_motor = THEKERNEL->step_ticker->add_stepper_motor( new StepperMotor(alpha_step_pin, alpha_dir_pin, alpha_en_pin) ); |
184 | this->beta_stepper_motor = THEKERNEL->step_ticker->add_stepper_motor( new StepperMotor(beta_step_pin, beta_dir_pin, beta_en_pin ) ); | |
185 | this->gamma_stepper_motor = THEKERNEL->step_ticker->add_stepper_motor( new StepperMotor(gamma_step_pin, gamma_dir_pin, gamma_en_pin) ); | |
78d0e16a | 186 | |
a84f0186 MM |
187 | alpha_stepper_motor->change_steps_per_mm(steps_per_mm[0]); |
188 | beta_stepper_motor->change_steps_per_mm(steps_per_mm[1]); | |
189 | gamma_stepper_motor->change_steps_per_mm(steps_per_mm[2]); | |
190 | ||
df6a30f2 MM |
191 | alpha_stepper_motor->max_rate = THEKERNEL->config->value(alpha_max_rate_checksum)->by_default(30000.0F)->as_number() / 60.0F; |
192 | beta_stepper_motor->max_rate = THEKERNEL->config->value(beta_max_rate_checksum )->by_default(30000.0F)->as_number() / 60.0F; | |
193 | gamma_stepper_motor->max_rate = THEKERNEL->config->value(gamma_max_rate_checksum)->by_default(30000.0F)->as_number() / 60.0F; | |
194 | ||
78d0e16a MM |
195 | actuators.clear(); |
196 | actuators.push_back(alpha_stepper_motor); | |
197 | actuators.push_back(beta_stepper_motor); | |
198 | actuators.push_back(gamma_stepper_motor); | |
975469ad MM |
199 | |
200 | // initialise actuator positions to current cartesian position (X0 Y0 Z0) | |
201 | // so the first move can be correct if homing is not performed | |
202 | float actuator_pos[3]; | |
203 | arm_solution->cartesian_to_actuator(last_milestone, actuator_pos); | |
204 | for (int i = 0; i < 3; i++) | |
205 | actuators[i]->change_last_milestone(actuator_pos[i]); | |
4cff3ded AW |
206 | } |
207 | ||
5647f709 | 208 | void Robot::on_get_public_data(void* argument){ |
b55cfff1 JM |
209 | PublicDataRequest* pdr = static_cast<PublicDataRequest*>(argument); |
210 | ||
211 | if(!pdr->starts_with(robot_checksum)) return; | |
212 | ||
213 | if(pdr->second_element_is(speed_override_percent_checksum)) { | |
1ad23cd3 | 214 | static float return_data; |
da947c62 | 215 | return_data = 100.0F * 60.0F / seconds_per_minute; |
b55cfff1 JM |
216 | pdr->set_data_ptr(&return_data); |
217 | pdr->set_taken(); | |
98761c28 | 218 | |
b55cfff1 | 219 | }else if(pdr->second_element_is(current_position_checksum)) { |
1ad23cd3 | 220 | static float return_data[3]; |
2ba859c9 MM |
221 | return_data[0]= from_millimeters(this->last_milestone[0]); |
222 | return_data[1]= from_millimeters(this->last_milestone[1]); | |
223 | return_data[2]= from_millimeters(this->last_milestone[2]); | |
b55cfff1 JM |
224 | |
225 | pdr->set_data_ptr(&return_data); | |
98761c28 | 226 | pdr->set_taken(); |
b55cfff1 | 227 | } |
5647f709 JM |
228 | } |
229 | ||
230 | void Robot::on_set_public_data(void* argument){ | |
b55cfff1 | 231 | PublicDataRequest* pdr = static_cast<PublicDataRequest*>(argument); |
5647f709 | 232 | |
b55cfff1 | 233 | if(!pdr->starts_with(robot_checksum)) return; |
5647f709 | 234 | |
b55cfff1 | 235 | if(pdr->second_element_is(speed_override_percent_checksum)) { |
7a522ccc | 236 | // NOTE do not use this while printing! |
1ad23cd3 | 237 | float t= *static_cast<float*>(pdr->get_data_ptr()); |
98761c28 | 238 | // enforce minimum 10% speed |
da947c62 | 239 | if (t < 10.0F) t= 10.0F; |
98761c28 | 240 | |
da947c62 | 241 | this->seconds_per_minute = t / 0.6F; // t * 60 / 100 |
b55cfff1 JM |
242 | pdr->set_taken(); |
243 | } | |
5647f709 JM |
244 | } |
245 | ||
4cff3ded | 246 | //A GCode has been received |
edac9072 | 247 | //See if the current Gcode line has some orders for us |
4cff3ded AW |
248 | void Robot::on_gcode_received(void * argument){ |
249 | Gcode* gcode = static_cast<Gcode*>(argument); | |
6bc4a00a | 250 | |
4cff3ded AW |
251 | //Temp variables, constant properties are stored in the object |
252 | uint8_t next_action = NEXT_ACTION_DEFAULT; | |
23c90ba6 | 253 | this->motion_mode = -1; |
4cff3ded AW |
254 | |
255 | //G-letter Gcodes are mostly what the Robot module is interrested in, other modules also catch the gcode event and do stuff accordingly | |
3c4f2dd8 AW |
256 | if( gcode->has_g){ |
257 | switch( gcode->g ){ | |
74b6303c DD |
258 | case 0: this->motion_mode = MOTION_MODE_SEEK; gcode->mark_as_taken(); break; |
259 | case 1: this->motion_mode = MOTION_MODE_LINEAR; gcode->mark_as_taken(); break; | |
260 | case 2: this->motion_mode = MOTION_MODE_CW_ARC; gcode->mark_as_taken(); break; | |
261 | case 3: this->motion_mode = MOTION_MODE_CCW_ARC; gcode->mark_as_taken(); break; | |
262 | case 17: this->select_plane(X_AXIS, Y_AXIS, Z_AXIS); gcode->mark_as_taken(); break; | |
263 | case 18: this->select_plane(X_AXIS, Z_AXIS, Y_AXIS); gcode->mark_as_taken(); break; | |
264 | case 19: this->select_plane(Y_AXIS, Z_AXIS, X_AXIS); gcode->mark_as_taken(); break; | |
265 | case 20: this->inch_mode = true; gcode->mark_as_taken(); break; | |
266 | case 21: this->inch_mode = false; gcode->mark_as_taken(); break; | |
267 | case 90: this->absolute_mode = true; gcode->mark_as_taken(); break; | |
268 | case 91: this->absolute_mode = false; gcode->mark_as_taken(); break; | |
0b804a41 | 269 | case 92: { |
6bc4a00a | 270 | if(gcode->get_num_args() == 0){ |
8a23b271 | 271 | clear_vector(this->last_milestone); |
6bc4a00a | 272 | }else{ |
eaf8a8a8 BG |
273 | for (char letter = 'X'; letter <= 'Z'; letter++){ |
274 | if ( gcode->has_letter(letter) ) | |
6bc4a00a | 275 | this->last_milestone[letter-'X'] = this->to_millimeters(gcode->get_value(letter)); |
eaf8a8a8 | 276 | } |
6bc4a00a | 277 | } |
78d0e16a MM |
278 | |
279 | // TODO: handle any number of actuators | |
280 | float actuator_pos[3]; | |
2ba859c9 | 281 | arm_solution->cartesian_to_actuator(last_milestone, actuator_pos); |
78d0e16a MM |
282 | |
283 | for (int i = 0; i < 3; i++) | |
284 | actuators[i]->change_last_milestone(actuator_pos[i]); | |
285 | ||
74b6303c | 286 | gcode->mark_as_taken(); |
78d0e16a | 287 | return; |
6bc4a00a MM |
288 | } |
289 | } | |
3c4f2dd8 | 290 | }else if( gcode->has_m){ |
33e4cc02 | 291 | switch( gcode->m ){ |
0fb5b438 | 292 | case 92: // M92 - set steps per mm |
0fb5b438 | 293 | if (gcode->has_letter('X')) |
78d0e16a | 294 | actuators[0]->change_steps_per_mm(this->to_millimeters(gcode->get_value('X'))); |
0fb5b438 | 295 | if (gcode->has_letter('Y')) |
78d0e16a | 296 | actuators[1]->change_steps_per_mm(this->to_millimeters(gcode->get_value('Y'))); |
0fb5b438 | 297 | if (gcode->has_letter('Z')) |
78d0e16a | 298 | actuators[2]->change_steps_per_mm(this->to_millimeters(gcode->get_value('Z'))); |
7369629d MM |
299 | if (gcode->has_letter('F')) |
300 | seconds_per_minute = gcode->get_value('F'); | |
78d0e16a MM |
301 | |
302 | gcode->stream->printf("X:%g Y:%g Z:%g F:%g ", actuators[0]->steps_per_mm, actuators[1]->steps_per_mm, actuators[2]->steps_per_mm, seconds_per_minute); | |
0fb5b438 | 303 | gcode->add_nl = true; |
74b6303c | 304 | gcode->mark_as_taken(); |
0fb5b438 | 305 | return; |
58d6d841 | 306 | case 114: gcode->stream->printf("C: X:%1.3f Y:%1.3f Z:%1.3f ", |
2ba859c9 MM |
307 | from_millimeters(this->last_milestone[0]), |
308 | from_millimeters(this->last_milestone[1]), | |
309 | from_millimeters(this->last_milestone[2])); | |
6989211c | 310 | gcode->add_nl = true; |
74b6303c | 311 | gcode->mark_as_taken(); |
6989211c | 312 | return; |
33e4cc02 | 313 | |
83488642 JM |
314 | case 203: // M203 Set maximum feedrates in mm/sec |
315 | if (gcode->has_letter('X')) | |
316 | this->max_speeds[X_AXIS]= gcode->get_value('X'); | |
317 | if (gcode->has_letter('Y')) | |
318 | this->max_speeds[Y_AXIS]= gcode->get_value('Y'); | |
319 | if (gcode->has_letter('Z')) | |
320 | this->max_speeds[Z_AXIS]= gcode->get_value('Z'); | |
321 | if (gcode->has_letter('A')) | |
322 | alpha_stepper_motor->max_rate= gcode->get_value('A'); | |
323 | if (gcode->has_letter('B')) | |
324 | beta_stepper_motor->max_rate= gcode->get_value('B'); | |
325 | if (gcode->has_letter('C')) | |
326 | gamma_stepper_motor->max_rate= gcode->get_value('C'); | |
327 | ||
328 | gcode->stream->printf("X:%g Y:%g Z:%g A:%g B:%g C:%g ", | |
329 | this->max_speeds[X_AXIS], this->max_speeds[Y_AXIS], this->max_speeds[Z_AXIS], | |
330 | alpha_stepper_motor->max_rate, beta_stepper_motor->max_rate, gamma_stepper_motor->max_rate); | |
331 | gcode->add_nl = true; | |
332 | gcode->mark_as_taken(); | |
333 | break; | |
334 | ||
d4ee6ee2 JM |
335 | case 204: // M204 Snnn - set acceleration to nnn, NB only Snnn is currently supported |
336 | gcode->mark_as_taken(); | |
83488642 | 337 | |
d4ee6ee2 JM |
338 | if (gcode->has_letter('S')) |
339 | { | |
83488642 JM |
340 | // TODO for safety so it applies only to following gcodes, maybe a better way to do this? |
341 | THEKERNEL->conveyor->wait_for_empty_queue(); | |
da947c62 | 342 | float acc= gcode->get_value('S'); // mm/s^2 |
d4ee6ee2 | 343 | // enforce minimum |
da947c62 MM |
344 | if (acc < 1.0F) |
345 | acc = 1.0F; | |
314ab8f7 | 346 | THEKERNEL->planner->acceleration= acc; |
d4ee6ee2 JM |
347 | } |
348 | break; | |
349 | ||
8b69c90d | 350 | case 205: // M205 Xnnn - set junction deviation Snnn - Set minimum planner speed |
d4ee6ee2 JM |
351 | gcode->mark_as_taken(); |
352 | if (gcode->has_letter('X')) | |
353 | { | |
1ad23cd3 | 354 | float jd= gcode->get_value('X'); |
d4ee6ee2 | 355 | // enforce minimum |
8b69c90d JM |
356 | if (jd < 0.0F) |
357 | jd = 0.0F; | |
314ab8f7 | 358 | THEKERNEL->planner->junction_deviation= jd; |
d4ee6ee2 | 359 | } |
8b69c90d JM |
360 | if (gcode->has_letter('S')) |
361 | { | |
362 | float mps= gcode->get_value('S'); | |
363 | // enforce minimum | |
364 | if (mps < 0.0F) | |
365 | mps = 0.0F; | |
366 | THEKERNEL->planner->minimum_planner_speed= mps; | |
367 | } | |
d4ee6ee2 | 368 | break; |
98761c28 | 369 | |
7369629d | 370 | case 220: // M220 - speed override percentage |
74b6303c | 371 | gcode->mark_as_taken(); |
7369629d MM |
372 | if (gcode->has_letter('S')) |
373 | { | |
1ad23cd3 | 374 | float factor = gcode->get_value('S'); |
98761c28 | 375 | // enforce minimum 10% speed |
da947c62 MM |
376 | if (factor < 10.0F) |
377 | factor = 10.0F; | |
378 | // enforce maximum 10x speed | |
379 | if (factor > 1000.0F) | |
380 | factor = 1000.0F; | |
381 | ||
382 | seconds_per_minute = 6000.0F / factor; | |
7369629d | 383 | } |
b4f56013 | 384 | break; |
ec4773e5 | 385 | |
494dc541 JM |
386 | case 400: // wait until all moves are done up to this point |
387 | gcode->mark_as_taken(); | |
314ab8f7 | 388 | THEKERNEL->conveyor->wait_for_empty_queue(); |
494dc541 JM |
389 | break; |
390 | ||
33e4cc02 JM |
391 | case 500: // M500 saves some volatile settings to config override file |
392 | case 503: // M503 just prints the settings | |
78d0e16a | 393 | gcode->stream->printf(";Steps per unit:\nM92 X%1.5f Y%1.5f Z%1.5f\n", actuators[0]->steps_per_mm, actuators[1]->steps_per_mm, actuators[2]->steps_per_mm); |
da947c62 | 394 | gcode->stream->printf(";Acceleration mm/sec^2:\nM204 S%1.5f\n", THEKERNEL->planner->acceleration); |
8b69c90d | 395 | gcode->stream->printf(";X- Junction Deviation, S - Minimum Planner speed:\nM205 X%1.5f S%1.5f\n", THEKERNEL->planner->junction_deviation, THEKERNEL->planner->minimum_planner_speed); |
83488642 JM |
396 | gcode->stream->printf(";Max feedrates in mm/sec, XYZ cartesian, ABC actuator:\nM203 X%1.5f Y%1.5f Z%1.5f A%1.5f B%1.5f C%1.5f\n", |
397 | this->max_speeds[X_AXIS], this->max_speeds[Y_AXIS], this->max_speeds[Z_AXIS], | |
398 | alpha_stepper_motor->max_rate, beta_stepper_motor->max_rate, gamma_stepper_motor->max_rate); | |
33e4cc02 JM |
399 | gcode->mark_as_taken(); |
400 | break; | |
401 | ||
ec29d378 | 402 | case 665: // M665 set optional arm solution variables based on arm solution. NOTE these are not saved with M500 |
ec4773e5 | 403 | gcode->mark_as_taken(); |
ec29d378 | 404 | // the parameter args could be any letter except S so try each one |
ec4773e5 | 405 | for(char c='A';c<='Z';c++) { |
ec29d378 | 406 | if(c == 'S') continue; // used for segments per second |
1ad23cd3 | 407 | float v; |
ec4773e5 JM |
408 | bool supported= arm_solution->get_optional(c, &v); // retrieve current value if supported |
409 | ||
410 | if(supported && gcode->has_letter(c)) { // set new value if supported | |
411 | v= gcode->get_value(c); | |
412 | arm_solution->set_optional(c, v); | |
413 | } | |
414 | if(supported) { // print all current values of supported options | |
5523c05d JM |
415 | gcode->stream->printf("%c %8.3f ", c, v); |
416 | gcode->add_nl = true; | |
ec4773e5 JM |
417 | } |
418 | } | |
ec29d378 JM |
419 | // set delta segments per second |
420 | if(gcode->has_letter('S')) { | |
421 | this->delta_segments_per_second= gcode->get_value('S'); | |
422 | } | |
ec4773e5 | 423 | break; |
6989211c | 424 | } |
494dc541 JM |
425 | } |
426 | ||
c83887ea MM |
427 | if( this->motion_mode < 0) |
428 | return; | |
6bc4a00a | 429 | |
4cff3ded | 430 | //Get parameters |
1ad23cd3 | 431 | float target[3], offset[3]; |
c2885de8 | 432 | clear_vector(offset); |
6bc4a00a | 433 | |
2ba859c9 | 434 | memcpy(target, this->last_milestone, sizeof(target)); //default to last target |
6bc4a00a | 435 | |
c2885de8 JM |
436 | for(char letter = 'I'; letter <= 'K'; letter++){ |
437 | if( gcode->has_letter(letter) ){ | |
438 | offset[letter-'I'] = this->to_millimeters(gcode->get_value(letter)); | |
439 | } | |
440 | } | |
441 | for(char letter = 'X'; letter <= 'Z'; letter++){ | |
442 | if( gcode->has_letter(letter) ){ | |
443 | target[letter-'X'] = this->to_millimeters(gcode->get_value(letter)) + ( this->absolute_mode ? 0 : target[letter-'X']); | |
444 | } | |
445 | } | |
6bc4a00a | 446 | |
7369629d MM |
447 | if( gcode->has_letter('F') ) |
448 | { | |
449 | if( this->motion_mode == MOTION_MODE_SEEK ) | |
da947c62 | 450 | this->seek_rate = this->to_millimeters( gcode->get_value('F') ); |
7369629d | 451 | else |
da947c62 | 452 | this->feed_rate = this->to_millimeters( gcode->get_value('F') ); |
7369629d | 453 | } |
6bc4a00a | 454 | |
4cff3ded AW |
455 | //Perform any physical actions |
456 | switch( next_action ){ | |
457 | case NEXT_ACTION_DEFAULT: | |
458 | switch(this->motion_mode){ | |
459 | case MOTION_MODE_CANCEL: break; | |
da947c62 MM |
460 | case MOTION_MODE_SEEK : this->append_line(gcode, target, this->seek_rate / seconds_per_minute ); break; |
461 | case MOTION_MODE_LINEAR: this->append_line(gcode, target, this->feed_rate / seconds_per_minute ); break; | |
df27a6a3 | 462 | case MOTION_MODE_CW_ARC: case MOTION_MODE_CCW_ARC: this->compute_arc(gcode, offset, target ); break; |
4cff3ded AW |
463 | } |
464 | break; | |
465 | } | |
13e4a3f9 | 466 | |
4cff3ded AW |
467 | // As far as the parser is concerned, the position is now == target. In reality the |
468 | // motion control system might still be processing the action and the real tool position | |
469 | // in any intermediate location. | |
2ba859c9 | 470 | memcpy(this->last_milestone, target, sizeof(this->last_milestone)); // this->position[] = target[]; |
4cff3ded | 471 | |
edac9072 AW |
472 | } |
473 | ||
5984acdf | 474 | // We received a new gcode, and one of the functions |
edac9072 AW |
475 | // determined the distance for that given gcode. So now we can attach this gcode to the right block |
476 | // and continue | |
477 | void Robot::distance_in_gcode_is_known(Gcode* gcode){ | |
478 | ||
479 | //If the queue is empty, execute immediatly, otherwise attach to the last added block | |
e0ee24ed | 480 | THEKERNEL->conveyor->append_gcode(gcode); |
edac9072 AW |
481 | } |
482 | ||
483 | // Reset the position for all axes ( used in homing and G92 stuff ) | |
1ad23cd3 | 484 | void Robot::reset_axis_position(float position, int axis) { |
2ba859c9 | 485 | this->last_milestone[axis] = position; |
29c28822 MM |
486 | |
487 | float actuator_pos[3]; | |
488 | arm_solution->cartesian_to_actuator(last_milestone, actuator_pos); | |
489 | ||
490 | for (int i = 0; i < 3; i++) | |
491 | actuators[i]->change_last_milestone(actuator_pos[i]); | |
4cff3ded AW |
492 | } |
493 | ||
edac9072 | 494 | |
4cff3ded | 495 | // Convert target from millimeters to steps, and append this to the planner |
da947c62 | 496 | void Robot::append_milestone( float target[], float rate_mm_s ) |
df6a30f2 | 497 | { |
1ad23cd3 | 498 | float deltas[3]; |
df6a30f2 MM |
499 | float unit_vec[3]; |
500 | float actuator_pos[3]; | |
501 | float millimeters_of_travel; | |
502 | ||
503 | // find distance moved by each axis | |
504 | for (int axis = X_AXIS; axis <= Z_AXIS; axis++) | |
505 | deltas[axis] = target[axis] - last_milestone[axis]; | |
aab6cbba | 506 | |
edac9072 | 507 | // Compute how long this move moves, so we can attach it to the block for later use |
df6a30f2 MM |
508 | millimeters_of_travel = sqrtf( pow( deltas[X_AXIS], 2 ) + pow( deltas[Y_AXIS], 2 ) + pow( deltas[Z_AXIS], 2 ) ); |
509 | ||
510 | // find distance unit vector | |
511 | for (int i = 0; i < 3; i++) | |
512 | unit_vec[i] = deltas[i] / millimeters_of_travel; | |
513 | ||
514 | // Do not move faster than the configured cartesian limits | |
515 | for (int axis = X_AXIS; axis <= Z_AXIS; axis++) | |
516 | { | |
517 | if ( max_speeds[axis] > 0 ) | |
518 | { | |
da947c62 | 519 | float axis_speed = fabs(unit_vec[axis] * rate_mm_s); |
df6a30f2 MM |
520 | |
521 | if (axis_speed > max_speeds[axis]) | |
da947c62 | 522 | rate_mm_s *= ( max_speeds[axis] / axis_speed ); |
7b470506 AW |
523 | } |
524 | } | |
4cff3ded | 525 | |
df6a30f2 MM |
526 | // find actuator position given cartesian position |
527 | arm_solution->cartesian_to_actuator( target, actuator_pos ); | |
528 | ||
529 | // check per-actuator speed limits | |
530 | for (int actuator = 0; actuator <= 2; actuator++) | |
531 | { | |
da947c62 | 532 | float actuator_rate = fabs(actuator_pos[actuator] - actuators[actuator]->last_milestone_mm) * rate_mm_s / millimeters_of_travel; |
df6a30f2 MM |
533 | |
534 | if (actuator_rate > actuators[actuator]->max_rate) | |
da947c62 | 535 | rate_mm_s *= (actuators[actuator]->max_rate / actuator_rate); |
df6a30f2 MM |
536 | } |
537 | ||
edac9072 | 538 | // Append the block to the planner |
da947c62 | 539 | THEKERNEL->planner->append_block( actuator_pos, rate_mm_s, millimeters_of_travel, unit_vec ); |
4cff3ded | 540 | |
edac9072 | 541 | // Update the last_milestone to the current target for the next time we use last_milestone |
c2885de8 | 542 | memcpy(this->last_milestone, target, sizeof(this->last_milestone)); // this->last_milestone[] = target[]; |
4cff3ded AW |
543 | |
544 | } | |
545 | ||
edac9072 | 546 | // Append a move to the queue ( cutting it into segments if needed ) |
da947c62 | 547 | void Robot::append_line(Gcode* gcode, float target[], float rate_mm_s ){ |
4cff3ded | 548 | |
edac9072 | 549 | // Find out the distance for this gcode |
2ba859c9 | 550 | gcode->millimeters_of_travel = pow( target[X_AXIS]-this->last_milestone[X_AXIS], 2 ) + pow( target[Y_AXIS]-this->last_milestone[Y_AXIS], 2 ) + pow( target[Z_AXIS]-this->last_milestone[Z_AXIS], 2 ); |
4cff3ded | 551 | |
edac9072 | 552 | // We ignore non-moves ( for example, extruder moves are not XYZ moves ) |
70d29afd | 553 | if( gcode->millimeters_of_travel < 1e-8F ){ |
95b4885b JM |
554 | return; |
555 | } | |
436a2cd1 | 556 | |
2ba859c9 MM |
557 | gcode->millimeters_of_travel = sqrtf(gcode->millimeters_of_travel); |
558 | ||
edac9072 | 559 | // Mark the gcode as having a known distance |
5dcb2ff3 | 560 | this->distance_in_gcode_is_known( gcode ); |
436a2cd1 | 561 | |
4a0c8e14 JM |
562 | // We cut the line into smaller segments. This is not usefull in a cartesian robot, but necessary for robots with rotational axes. |
563 | // In cartesian robot, a high "mm_per_line_segment" setting will prevent waste. | |
564 | // In delta robots either mm_per_line_segment can be used OR delta_segments_per_second The latter is more efficient and avoids splitting fast long lines into very small segments, like initial z move to 0, it is what Johanns Marlin delta port does | |
4a0c8e14 | 565 | uint16_t segments; |
5984acdf | 566 | |
c2885de8 | 567 | if(this->delta_segments_per_second > 1.0F) { |
4a0c8e14 JM |
568 | // enabled if set to something > 1, it is set to 0.0 by default |
569 | // segment based on current speed and requested segments per second | |
570 | // the faster the travel speed the fewer segments needed | |
571 | // NOTE rate is mm/sec and we take into account any speed override | |
da947c62 | 572 | float seconds = gcode->millimeters_of_travel / rate_mm_s; |
4a0c8e14 JM |
573 | segments= max(1, ceil(this->delta_segments_per_second * seconds)); |
574 | // TODO if we are only moving in Z on a delta we don't really need to segment at all | |
5984acdf | 575 | |
4a0c8e14 | 576 | }else{ |
c2885de8 | 577 | if(this->mm_per_line_segment == 0.0F){ |
4a0c8e14 JM |
578 | segments= 1; // don't split it up |
579 | }else{ | |
580 | segments = ceil( gcode->millimeters_of_travel/ this->mm_per_line_segment); | |
581 | } | |
582 | } | |
5984acdf | 583 | |
2ba859c9 MM |
584 | if (segments > 1) |
585 | { | |
586 | // A vector to keep track of the endpoint of each segment | |
587 | float segment_delta[3]; | |
588 | float segment_end[3]; | |
589 | ||
590 | // How far do we move each segment? | |
9fff6045 | 591 | for (int i = X_AXIS; i <= Z_AXIS; i++) |
2ba859c9 | 592 | segment_delta[i] = (target[i] - last_milestone[i]) / segments; |
4cff3ded | 593 | |
c8e0fb15 MM |
594 | // segment 0 is already done - it's the end point of the previous move so we start at segment 1 |
595 | // We always add another point after this loop so we stop at segments-1, ie i < segments | |
2ba859c9 MM |
596 | for (int i = 1; i < segments; i++) |
597 | { | |
598 | for(int axis=X_AXIS; axis <= Z_AXIS; axis++ ) | |
599 | segment_end[axis] = last_milestone[axis] + segment_delta[axis]; | |
600 | ||
601 | // Append the end of this segment to the queue | |
602 | this->append_milestone(segment_end, rate_mm_s); | |
603 | } | |
4cff3ded | 604 | } |
5984acdf MM |
605 | |
606 | // Append the end of this full move to the queue | |
da947c62 | 607 | this->append_milestone(target, rate_mm_s); |
2134bcf2 MM |
608 | |
609 | // if adding these blocks didn't start executing, do that now | |
610 | THEKERNEL->conveyor->ensure_running(); | |
4cff3ded AW |
611 | } |
612 | ||
4cff3ded | 613 | |
edac9072 | 614 | // Append an arc to the queue ( cutting it into segments as needed ) |
1ad23cd3 | 615 | void Robot::append_arc(Gcode* gcode, float target[], float offset[], float radius, bool is_clockwise ){ |
aab6cbba | 616 | |
edac9072 | 617 | // Scary math |
2ba859c9 MM |
618 | float center_axis0 = this->last_milestone[this->plane_axis_0] + offset[this->plane_axis_0]; |
619 | float center_axis1 = this->last_milestone[this->plane_axis_1] + offset[this->plane_axis_1]; | |
620 | float linear_travel = target[this->plane_axis_2] - this->last_milestone[this->plane_axis_2]; | |
1ad23cd3 MM |
621 | float r_axis0 = -offset[this->plane_axis_0]; // Radius vector from center to current location |
622 | float r_axis1 = -offset[this->plane_axis_1]; | |
623 | float rt_axis0 = target[this->plane_axis_0] - center_axis0; | |
624 | float rt_axis1 = target[this->plane_axis_1] - center_axis1; | |
aab6cbba AW |
625 | |
626 | // CCW angle between position and target from circle center. Only one atan2() trig computation required. | |
1ad23cd3 | 627 | float angular_travel = atan2(r_axis0*rt_axis1-r_axis1*rt_axis0, r_axis0*rt_axis0+r_axis1*rt_axis1); |
aab6cbba AW |
628 | if (angular_travel < 0) { angular_travel += 2*M_PI; } |
629 | if (is_clockwise) { angular_travel -= 2*M_PI; } | |
630 | ||
edac9072 | 631 | // Find the distance for this gcode |
13addf09 | 632 | gcode->millimeters_of_travel = hypotf(angular_travel*radius, fabs(linear_travel)); |
436a2cd1 | 633 | |
edac9072 | 634 | // We don't care about non-XYZ moves ( for example the extruder produces some of those ) |
c2885de8 | 635 | if( gcode->millimeters_of_travel < 0.0001F ){ return; } |
5dcb2ff3 | 636 | |
edac9072 | 637 | // Mark the gcode as having a known distance |
d149c730 | 638 | this->distance_in_gcode_is_known( gcode ); |
5984acdf MM |
639 | |
640 | // Figure out how many segments for this gcode | |
436a2cd1 | 641 | uint16_t segments = floor(gcode->millimeters_of_travel/this->mm_per_arc_segment); |
aab6cbba | 642 | |
1ad23cd3 MM |
643 | float theta_per_segment = angular_travel/segments; |
644 | float linear_per_segment = linear_travel/segments; | |
aab6cbba AW |
645 | |
646 | /* Vector rotation by transformation matrix: r is the original vector, r_T is the rotated vector, | |
647 | and phi is the angle of rotation. Based on the solution approach by Jens Geisler. | |
648 | r_T = [cos(phi) -sin(phi); | |
649 | sin(phi) cos(phi] * r ; | |
650 | For arc generation, the center of the circle is the axis of rotation and the radius vector is | |
651 | defined from the circle center to the initial position. Each line segment is formed by successive | |
652 | vector rotations. This requires only two cos() and sin() computations to form the rotation | |
653 | matrix for the duration of the entire arc. Error may accumulate from numerical round-off, since | |
1ad23cd3 | 654 | all float numbers are single precision on the Arduino. (True float precision will not have |
aab6cbba AW |
655 | round off issues for CNC applications.) Single precision error can accumulate to be greater than |
656 | tool precision in some cases. Therefore, arc path correction is implemented. | |
657 | ||
658 | Small angle approximation may be used to reduce computation overhead further. This approximation | |
659 | holds for everything, but very small circles and large mm_per_arc_segment values. In other words, | |
660 | theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large | |
661 | to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for | |
662 | numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an | |
663 | issue for CNC machines with the single precision Arduino calculations. | |
664 | This approximation also allows mc_arc to immediately insert a line segment into the planner | |
665 | without the initial overhead of computing cos() or sin(). By the time the arc needs to be applied | |
666 | a correction, the planner should have caught up to the lag caused by the initial mc_arc overhead. | |
667 | This is important when there are successive arc motions. | |
668 | */ | |
669 | // Vector rotation matrix values | |
c2885de8 | 670 | float cos_T = 1-0.5F*theta_per_segment*theta_per_segment; // Small angle approximation |
1ad23cd3 | 671 | float sin_T = theta_per_segment; |
aab6cbba | 672 | |
1ad23cd3 MM |
673 | float arc_target[3]; |
674 | float sin_Ti; | |
675 | float cos_Ti; | |
676 | float r_axisi; | |
aab6cbba AW |
677 | uint16_t i; |
678 | int8_t count = 0; | |
679 | ||
680 | // Initialize the linear axis | |
2ba859c9 | 681 | arc_target[this->plane_axis_2] = this->last_milestone[this->plane_axis_2]; |
aab6cbba AW |
682 | |
683 | for (i = 1; i<segments; i++) { // Increment (segments-1) | |
684 | ||
b66fb830 | 685 | if (count < this->arc_correction ) { |
aab6cbba AW |
686 | // Apply vector rotation matrix |
687 | r_axisi = r_axis0*sin_T + r_axis1*cos_T; | |
688 | r_axis0 = r_axis0*cos_T - r_axis1*sin_T; | |
689 | r_axis1 = r_axisi; | |
690 | count++; | |
691 | } else { | |
692 | // Arc correction to radius vector. Computed only every N_ARC_CORRECTION increments. | |
693 | // Compute exact location by applying transformation matrix from initial radius vector(=-offset). | |
13addf09 MM |
694 | cos_Ti = cosf(i*theta_per_segment); |
695 | sin_Ti = sinf(i*theta_per_segment); | |
aab6cbba AW |
696 | r_axis0 = -offset[this->plane_axis_0]*cos_Ti + offset[this->plane_axis_1]*sin_Ti; |
697 | r_axis1 = -offset[this->plane_axis_0]*sin_Ti - offset[this->plane_axis_1]*cos_Ti; | |
698 | count = 0; | |
699 | } | |
700 | ||
701 | // Update arc_target location | |
702 | arc_target[this->plane_axis_0] = center_axis0 + r_axis0; | |
703 | arc_target[this->plane_axis_1] = center_axis1 + r_axis1; | |
704 | arc_target[this->plane_axis_2] += linear_per_segment; | |
edac9072 AW |
705 | |
706 | // Append this segment to the queue | |
da947c62 | 707 | this->append_milestone(arc_target, this->feed_rate / seconds_per_minute); |
aab6cbba AW |
708 | |
709 | } | |
edac9072 | 710 | |
aab6cbba | 711 | // Ensure last segment arrives at target location. |
da947c62 | 712 | this->append_milestone(target, this->feed_rate / seconds_per_minute); |
aab6cbba AW |
713 | } |
714 | ||
edac9072 | 715 | // Do the math for an arc and add it to the queue |
1ad23cd3 | 716 | void Robot::compute_arc(Gcode* gcode, float offset[], float target[]){ |
aab6cbba AW |
717 | |
718 | // Find the radius | |
13addf09 | 719 | float radius = hypotf(offset[this->plane_axis_0], offset[this->plane_axis_1]); |
aab6cbba AW |
720 | |
721 | // Set clockwise/counter-clockwise sign for mc_arc computations | |
722 | bool is_clockwise = false; | |
df27a6a3 | 723 | if( this->motion_mode == MOTION_MODE_CW_ARC ){ is_clockwise = true; } |
aab6cbba AW |
724 | |
725 | // Append arc | |
436a2cd1 | 726 | this->append_arc(gcode, target, offset, radius, is_clockwise ); |
aab6cbba AW |
727 | |
728 | } | |
729 | ||
730 | ||
1ad23cd3 | 731 | float Robot::theta(float x, float y){ |
71c21c73 | 732 | float t = atanf(x/fabs(y)); |
4cff3ded AW |
733 | if (y>0) {return(t);} else {if (t>0){return(M_PI-t);} else {return(-M_PI-t);}} |
734 | } | |
735 | ||
736 | void Robot::select_plane(uint8_t axis_0, uint8_t axis_1, uint8_t axis_2){ | |
737 | this->plane_axis_0 = axis_0; | |
738 | this->plane_axis_1 = axis_1; | |
739 | this->plane_axis_2 = axis_2; | |
740 | } | |
741 | ||
742 |