--enable-dynamic-linking Include support for dynamic linking"
ac_help="$ac_help
--enable-guile-debug Include internal debugging functions"
+ac_help="$ac_help
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--enable-shared build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static build static libraries [default=yes]"
-ac_help="$ac_help
- --with-threads thread interface"
# Initialize some variables set by options.
# The variables have the same names as the options, with
echo "$ac_t""no" 1>&6
fi
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
-echo $ac_n "checking for ld used by the C compiler ($CC $CFLAGS $LDFLAGS)""... $ac_c" 1>&6
-echo "configure:1127: checking for ld used by the C compiler ($CC $CFLAGS $LDFLAGS)" >&5
-if eval "test \"`echo '$''{'am_cv_path_LD'+set}'`\" = set"; then
+if test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1135: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1138: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$LD" in
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/ld"; then
+ ac_cv_path_LD="$ac_dir/ld"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
- if "$ac_dir/ld" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
- # If it was GNU ld, only accept it if we're using GCC.
- am_cv_path_LD="$ac_dir/ld"
- test "$ac_cv_prog_gcc" = yes && break
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" = yes && break
else
- # If it was not GNU ld, and we are not using GCC, then accept it.
- am_cv_path_LD="$ac_dir/ld"
- break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
esac
fi
-LD="$am_cv_path_LD"
+LD="$ac_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking whether we are using GNU ld""... $ac_c" 1>&6
+echo "configure:1177: checking whether we are using GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1193: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
libtool_flags="$libtool_shared$libtool_static"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
esac
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" LD="$LD" RANLIB="$RANLIB" \
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
echo $ac_n "checking for AIX""... $ac_c" 1>&6
-echo "configure:1223: checking for AIX" >&5
+echo "configure:1272: checking for AIX" >&5
cat > conftest.$ac_ext <<EOF
-#line 1225 "configure"
+#line 1274 "configure"
#include "confdefs.h"
#ifdef _AIX
yes
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:1247: checking for POSIXized ISC" >&5
+echo "configure:1296: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
-echo "configure:1269: checking for minix/config.h" >&5
+echo "configure:1318: checking for minix/config.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1274 "configure"
+#line 1323 "configure"
#include "confdefs.h"
#include <minix/config.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1279: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1318: checking for working const" >&5
+echo "configure:1367: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1323 "configure"
+#line 1372 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1372: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1394: checking for ANSI C header files" >&5
+echo "configure:1443: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1399 "configure"
+#line 1448 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1407: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1456: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1424 "configure"
+#line 1473 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1442 "configure"
+#line 1491 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1463 "configure"
+#line 1512 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1523: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:1502: checking for $ac_hdr that defines DIR" >&5
+echo "configure:1551: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1507 "configure"
+#line 1556 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:1515: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1564: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:1540: checking for opendir in -ldir" >&5
+echo "configure:1589: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1548 "configure"
+#line 1597 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:1581: checking for opendir in -lx" >&5
+echo "configure:1630: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1589 "configure"
+#line 1638 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1623: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1672: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1628 "configure"
+#line 1677 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1637: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1686: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1658: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1707: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1663 "configure"
+#line 1712 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1679: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1728: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1703: checking for $ac_hdr" >&5
+echo "configure:1752: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1708 "configure"
+#line 1757 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1762: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1744: checking for $ac_hdr" >&5
+echo "configure:1793: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1749 "configure"
+#line 1798 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1754: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1803: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking "whether libc.h and unistd.h can be included together"""... $ac_c" 1>&6
-echo "configure:1781: checking "whether libc.h and unistd.h can be included together"" >&5
+echo "configure:1830: checking "whether libc.h and unistd.h can be included together"" >&5
if eval "test \"`echo '$''{'guile_cv_header_libc_with_unistd'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
guile_cv_header_libc_with_unistd="yes"
else
cat > conftest.$ac_ext <<EOF
-#line 1792 "configure"
+#line 1841 "configure"
#include "confdefs.h"
# include <libc.h>
; return 0; }
EOF
-if { (eval echo configure:1802: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1851: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
guile_cv_header_libc_with_unistd=yes
else
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:1829: checking for uid_t in sys/types.h" >&5
+echo "configure:1878: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1834 "configure"
+#line 1883 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:1863: checking type of array argument to getgroups" >&5
+echo "configure:1912: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 1871 "configure"
+#line 1920 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:1896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 1910 "configure"
+#line 1959 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1934: checking return type of signal handlers" >&5
+echo "configure:1983: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1939 "configure"
+#line 1988 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:1956: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:1975: checking for mode_t" >&5
+echo "configure:2024: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1980 "configure"
+#line 2029 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:2009: checking for main in -lm" >&5
+echo "configure:2058: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2017 "configure"
+#line 2066 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lrx""... $ac_c" 1>&6
-echo "configure:2052: checking for main in -lrx" >&5
+echo "configure:2101: checking for main in -lrx" >&5
ac_lib_var=`echo rx'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lrx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2060 "configure"
+#line 2109 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:2095: checking for gethostbyname" >&5
+echo "configure:2144: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2100 "configure"
+#line 2149 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:2144: checking for gethostbyname in -lnsl" >&5
+echo "configure:2193: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2152 "configure"
+#line 2201 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:2163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:2192: checking for connect" >&5
+echo "configure:2241: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2197 "configure"
+#line 2246 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:2220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:2241: checking for connect in -lsocket" >&5
+echo "configure:2290: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2249 "configure"
+#line 2298 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:2260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$enable_dynamic_linking" = "yes"; then
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2294: checking for dlopen in -ldl" >&5
+echo "configure:2343: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2302 "configure"
+#line 2351 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "configure:2347: checking for dld_link in -ldld" >&5
+echo "configure:2396: checking for dld_link in -ldld" >&5
ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2355 "configure"
+#line 2404 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dld_link()
; return 0; }
EOF
-if { (eval echo configure:2366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in shl_load
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2402: checking for $ac_func" >&5
+echo "configure:2451: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2407 "configure"
+#line 2456 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in ctermid ftime getcwd geteuid gethostent gettimeofday lstat mkdir mknod nice readlink rename rmdir select setegid seteuid setlocale setpgid setsid sigaction strftime strptime symlink sync tcgetpgrp tcsetpgrp times uname waitpid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2469: checking for $ac_func" >&5
+echo "configure:2518: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2474 "configure"
+#line 2523 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2546: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
ac_safe=`echo "sys/un.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/un.h""... $ac_c" 1>&6
-echo "configure:2525: checking for sys/un.h" >&5
+echo "configure:2574: checking for sys/un.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2530 "configure"
+#line 2579 "configure"
#include "confdefs.h"
#include <sys/un.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2535: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2584: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in socketpair getgroups setpwent pause tzset
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2566: checking for $ac_func" >&5
+echo "configure:2615: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2571 "configure"
+#line 2620 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sethostent endhostent getnetent setnetent endnetent getprotoent endprotoent getservent endservent getnetbyaddr getnetbyname inet_lnaof inet_makeaddr inet_netof
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2625: checking for $ac_func" >&5
+echo "configure:2674: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2630 "configure"
+#line 2679 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for restartable system calls""... $ac_c" 1>&6
-echo "configure:2680: checking for restartable system calls" >&5
+echo "configure:2729: checking for restartable system calls" >&5
if eval "test \"`echo '$''{'scm_cv_restarts'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test $ac_cv_func_sigaction = yes; then
cat > conftest.$ac_ext <<EOF
-#line 2686 "configure"
+#line 2735 "configure"
#include "confdefs.h"
#include <signal.h>
int main() {
int a = SA_RESTART
; return 0; }
EOF
-if { (eval echo configure:2693: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2742: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_restarts=yes
else
for ac_func in regcomp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2720: checking for $ac_func" >&5
+echo "configure:2769: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2725 "configure"
+#line 2774 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2748: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_aton putenv strerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2777: checking for $ac_func" >&5
+echo "configure:2826: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2782 "configure"
+#line 2831 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2838: checking for working alloca.h" >&5
+echo "configure:2887: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2843 "configure"
+#line 2892 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2871: checking for alloca" >&5
+echo "configure:2920: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2876 "configure"
+#line 2925 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2931: checking whether alloca needs Cray hooks" >&5
+echo "configure:2980: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2936 "configure"
+#line 2985 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2961: checking for $ac_func" >&5
+echo "configure:3010: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2966 "configure"
+#line 3015 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2989: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3016: checking stack direction for C alloca" >&5
+echo "configure:3065: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3024 "configure"
+#line 3073 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
if test "$ALLOCA" = "alloca.o"; then LIBOBJS="alloca.o $LIBOBJS"; fi
echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6
-echo "configure:3067: checking for st_rdev in struct stat" >&5
+echo "configure:3116: checking for st_rdev in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3072 "configure"
+#line 3121 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_rdev;
; return 0; }
EOF
-if { (eval echo configure:3080: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_rdev=yes
else
fi
echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
-echo "configure:3101: checking for st_blksize in struct stat" >&5
+echo "configure:3150: checking for st_blksize in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3106 "configure"
+#line 3155 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blksize;
; return 0; }
EOF
-if { (eval echo configure:3114: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3163: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blksize=yes
else
# We could use AC_STRUCT_ST_BLOCKS here, but that adds fileblocks.o to
# LIBOBJS, which we don't need. This seems more direct.
echo $ac_n "checking for st_blocks in struct stat""... $ac_c" 1>&6
-echo "configure:3138: checking for st_blocks in struct stat" >&5
+echo "configure:3187: checking for st_blocks in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blocks'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3143 "configure"
+#line 3192 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blocks;
; return 0; }
EOF
-if { (eval echo configure:3151: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3200: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blocks=yes
else
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:3172: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:3221: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3177 "configure"
+#line 3226 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:3185: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3234: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
-echo "configure:3206: checking for tm_zone in struct tm" >&5
+echo "configure:3255: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3211 "configure"
+#line 3260 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
struct tm tm; tm.tm_zone;
; return 0; }
EOF
-if { (eval echo configure:3219: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3268: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:3239: checking for tzname" >&5
+echo "configure:3288: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3244 "configure"
+#line 3293 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
atoi(*tzname);
; return 0; }
EOF
-if { (eval echo configure:3254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
echo $ac_n "checking whether we need POSIX to get struct utimbuf""... $ac_c" 1>&6
-echo "configure:3277: checking whether we need POSIX to get struct utimbuf" >&5
+echo "configure:3326: checking whether we need POSIX to get struct utimbuf" >&5
if eval "test \"`echo '$''{'guile_cv_struct_utimbuf_needs_posix'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3282 "configure"
+#line 3331 "configure"
#include "confdefs.h"
#ifdef __EMX__
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3294: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3343: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo "configure: warning: Guessing that stack grows down -- see scmconfig.h.in" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 3327 "configure"
+#line 3376 "configure"
#include "confdefs.h"
aux (l) unsigned long l;
{ int x; exit (l >= ((unsigned long)&x)); }
main () { int q; aux((unsigned long)&q); }
EOF
-if { (eval echo configure:3333: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
#define SCM_STACK_GROWS_UP 1
echo "configure: warning: Guessing that sizeof(long) == sizeof(float) -- see scmconfig.h.in" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 3356 "configure"
+#line 3405 "configure"
#include "confdefs.h"
main () { exit (sizeof(float) != sizeof(long)); }
EOF
-if { (eval echo configure:3360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
#define SCM_SINGLES 1
echo $ac_n "checking for struct linger""... $ac_c" 1>&6
-echo "configure:3375: checking for struct linger" >&5
+echo "configure:3424: checking for struct linger" >&5
if eval "test \"`echo '$''{'scm_cv_struct_linger'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3380 "configure"
+#line 3429 "configure"
#include "confdefs.h"
#include <sys/types.h>
struct linger lgr; lgr.l_linger = 100
; return 0; }
EOF
-if { (eval echo configure:3389: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3438: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_struct_linger="yes"
else
#--------------------------------------------------------------------
echo $ac_n "checking how to set a stream file descriptor""... $ac_c" 1>&6
-echo "configure:3416: checking how to set a stream file descriptor" >&5
+echo "configure:3465: checking how to set a stream file descriptor" >&5
if eval "test \"`echo '$''{'scm_cv_fd_setter'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3421 "configure"
+#line 3470 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
stdout->_file = 1
; return 0; }
EOF
-if { (eval echo configure:3428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3477: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_fd_setter="_file"
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 3436 "configure"
+#line 3485 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
stdout->_fileno = 1
; return 0; }
EOF
-if { (eval echo configure:3443: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3492: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_fd_setter="_fileno"
else
#--------------------------------------------------------------------
echo $ac_n "checking how to get buffer char count from FILE structure""... $ac_c" 1>&6
-echo "configure:3481: checking how to get buffer char count from FILE structure" >&5
+echo "configure:3530: checking how to get buffer char count from FILE structure" >&5
if eval "test \"`echo '$''{'scm_cv_struct_file_count'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3486 "configure"
+#line 3535 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
FILE *f = stdin; f->_cnt = 0
; return 0; }
EOF
-if { (eval echo configure:3493: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3542: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_struct_file_count="_cnt"
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 3501 "configure"
+#line 3550 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
FILE *f = stdin; f->_r = 0
; return 0; }
EOF
-if { (eval echo configure:3508: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_struct_file_count="_r"
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 3516 "configure"
+#line 3565 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
FILE *f = stdin; f->readCount = 0
; return 0; }
EOF
-if { (eval echo configure:3523: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_struct_file_count="readCount"
else
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3550 "configure"
+#line 3599 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
FILE *f = stdin; f->_gptr = f->egptr;
; return 0; }
EOF
-if { (eval echo configure:3557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3606: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_struct_file_gptr=1
else
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3580 "configure"
+#line 3629 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
FILE *f = stdin; f->_IO_read_ptr = f->_IO_read_end;
; return 0; }
EOF
-if { (eval echo configure:3587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
scm_cv_struct_file_readptr=1
else
#
#--------------------------------------------------------------------
-
-echo $ac_n "checking "threads package type"""... $ac_c" 1>&6
-echo "configure:3617: checking "threads package type"" >&5
-if eval "test \"`echo '$''{'cy_cv_threads_package'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
-if eval "test \"`echo '$''{'cy_cv_threads_cflags'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
-if eval "test \"`echo '$''{'cy_cv_threads_libs'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
-use_threads=no;
-# Check whether --with-threads or --without-threads was given.
-if test "${with_threads+set}" = set; then
- withval="$with_threads"
- use_threads=$withval
-else
- use_threads=no
-fi
-
-test -n "$use_threads" || use_threads=qt
-threads_package=unknown
-if test "$use_threads" != no; then
- if test "$use_threads" = yes || test "$use_threads" = qt; then
- # Look for qt in source directory.
- if test -f $srcdir/qt/qt.c; then
- qtsrcdir="`(cd $srcdir; pwd)`/qt"
- threads_package=COOP
- cy_cv_threads_cflags="-I$qtsrcdir -I../qt"
- cy_cv_threads_libs="../qt/libqt.a"
- fi
- else
- if test -f $use_threads/qt.c; then
- # FIXME seems as though we should try to use an installed qt here.
- threads_package=COOP
- cy_cv_threads_cflags="-I$use_threads -I../qt"
- cy_cv_threads_libs="../qt/libqt.a"
- fi
- fi
- if test "$use_threads" = pthreads; then
- # Look for pthreads in srcdir. See above to understand why
- # we always set threads_package.
- if test -f $srcdir/../../pthreads/pthreads/queue.c \
- || test -f $srcdir/../pthreads/pthreads/queue.c; then
- threads_package=MIT
- cy_cv_threads_cflags="-I$srcdir/../../pthreads/include"
- cy_cv_threads_libs="-L../../pthreads/lib -lpthread"
- fi
- fi
- saved_CPP="$CPPFLAGS"
- saved_LD="$LDFLAGS"
- saved_LIBS="$LIBS"
- if test "$threads_package" = unknown; then
- CPPFLAGS="-I$use_threads/include"
- LDFLAGS="-L$use_threads/lib"
- LIBS="-lgthreads -lmalloc"
- cat > conftest.$ac_ext <<EOF
-#line 3676 "configure"
-#include "confdefs.h"
-#include <pthread.h>
-int main() {
-
-pthread_equal(NULL,NULL);
-
-; return 0; }
-EOF
-if { (eval echo configure:3685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- threads_package=FSU
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- fi
- if test "$threads_package" = unknown; then
- LIBS="-lpthread"
- cat > conftest.$ac_ext <<EOF
-#line 3697 "configure"
-#include "confdefs.h"
-#include <pthread.h>
-int main() {
-
-pthread_equal(NULL,NULL);
-
-; return 0; }
-EOF
-if { (eval echo configure:3706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- threads_package=MIT
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- fi
- if test "$threads_package" = unknown; then
- LIBS="-lpthreads"
- cat > conftest.$ac_ext <<EOF
-#line 3718 "configure"
-#include "confdefs.h"
-#include <pthread.h>
-int main() {
-
-pthread_equal(NULL,NULL);
-
-; return 0; }
-EOF
-if { (eval echo configure:3727: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- threads_package=PCthreads
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- fi
- cy_cv_threads_cflags="$CPPFLAGS $cy_cv_threads_cflags"
- cy_cv_threads_libs="$LDFLAGS $LIBS $cy_cv_threads_libs"
- cy_cv_threads_package=$threads_package
- CPPFLAGS="$saved_CPP"
- LDFLAGS="$saved_LD"
- LIBS="$saved_LIBS"
- if test "$threads_package" = unknown; then
- { echo "configure: error: "cannot find thread library installation"" 1>&2; exit 1; }
- fi
-fi
-
-fi
-
-
-fi
-
-
-fi
-
-echo "$ac_t""$cy_cv_threads_package" 1>&6
-
+CY_AC_WITH_THREADS
CFLAGS="$CFLAGS $cy_cv_threads_cflags"
THREAD_LIBS="$cy_cv_threads_libs"
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3807: checking for $ac_word" >&5
+echo "configure:3715: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:3866: checking host system type" >&5
+echo "configure:3774: checking host system type" >&5
host_alias=$host
case "$host_alias" in
qtmds_s=$qtsrcdir/md/sparc.s
qtdmdb_s=$qtsrcdir/md/sparc_b.s
;;
+alpha-*-*)
+ qtmd_h=md/axp.h
+ qtmdc_c=$qtsrcdir/md/null.c
+ qtmds_s=$qtsrcdir/md/axp.s
+ qtdmdb_s=$qtsrcdir/md/axp_b.s
+ ;;
*)
echo "Unknown configuration; threads package disabled"
threads_enabled=false
s%@host_os@%$host_os%g
s%@RANLIB@%$RANLIB%g
s%@LD@%$LD%g
+s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
s%@LIBOBJS@%$LIBOBJS%g
s%@ALLOCA@%$ALLOCA%g