--- /dev/null
+Guile Installation Guide
+Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+ Permission is granted to anyone to make or distribute verbatim copies
+ of this document as received, in any medium, provided that the
+ copyright notice and permission notice are preserved,
+ and that the distributor grants the recipient permission
+ for further redistribution as permitted by this notice.
+
+ Permission is granted to distribute modified versions
+ of this document, or of portions of it,
+ under the above conditions, provided also that they
+ carry prominent notices stating who last changed them,
+ and that any new or changed statements about the activities
+ of the Free Software Foundation are approved by the Foundation.
+
+
+Brief Installation Instructions ===========================================
+
+To build Guile on unix, there are two basic steps:
+
+ 1. Type "./configure", to configure the package for your system.
+ 2. Type "make", to build the package.
+
+Generic instructions for configuring and compiling GNU distributions
+are included below. (For instructions how to install SLIB, the scheme
+procedure library, see below.)
+
+
+Guile can use a number of external packages such as `readline' when
+they are available. Guile expects to be able to find these packages
+in the default compiler setup, it does not try to make any special
+arrangements itself. For example, for the `readline' package, Guile
+expects to be able to find the include file <readline/readline.h>,
+without passing any special `-I' options to the compiler.
+
+If you installed an external package, and you used the --prefix
+installation option to install it somewhere else than /usr/local, you
+must arrange for your compiler to find it by default. If that
+compiler is gcc, one convenient way of making such arrangements is to
+use the --with-local-prefix option during installation, naming the
+same directory as you used in the --prefix option of the package. In
+particular, it is not good enough to use the same --prefix option when
+you install gcc and the package; you need to use the
+--with-local-prefix option as well. See the gcc documentation for
+more details.
+
+
+Special Instructions For Some Systems =====================================
+
+We would like Guile to build on all systems using the simple
+instructions above, but it seems that a few systems still need special
+treatment. If you can send us fixes for these problems, we'd be
+grateful.
+
+SunOS 4.1: Guile's shared library support seems to be confused, but
+ hey; shared libraries are confusing. You may need to configure
+ Guile with a command like:
+ ./configure --disable-shared
+ For more information on `--disable-shared', see below, "Flags
+ Accepted by Configure".
+
+HP/UX: GCC 2.7.2 (and maybe other versions) have trouble creating
+ shared libraries if they depend on any non-shared libraries. GCC
+ seems to have other problems as well. To work around this, we
+ suggest you configure Guile to use the system's C compiler:
+ CC=cc ./configure
+
+NetBSD: Perry Metzger says, "Guile will build under NetBSD only using
+ gmake -- the native make will not work. (gmake is in our package
+ system, so this will not be a problem when we packagize 1.3.)"
+
+
+Flags Accepted by Configure ===============================================
+
+If you run the configure script with no arguments, it should examine
+your system and set things up appropriately. However, there are a few
+switches specific to Guile you may find useful in some circumstances.
+
+
+--enable-maintainer-mode
+
+ If you have automake, autoconf, and libtool installed on your
+ system, this switch causes configure to generate Makefiles which
+ know how to automatically regenerate configure scripts, makefiles,
+ and headers, when they are out of date. The HACKING file says which
+ versions of those tools you will need.
+
+
+--with-threads --- Build with thread support
+
+ Build a Guile executable and library that supports cooperative
+ threading. If you use this switch, Guile will also build and
+ install the QuickThreads non-preemptive threading library,
+ libqthreads, which you will need to link into your programs after
+ libguile. When you use `guile-config', you will pick up all
+ neccessary linker flags automatically.
+
+ Cooperative threads are not yet thoroughly tested; once they are,
+ they will be enabled by default. The interaction with blocking I/O
+ is pretty ad hoc at the moment. In our experience, bugs in the
+ thread support do not affect you if you don't actually use threads.
+
+
+--disable-linuxthreads --- Disable pthread compatability hack on Linux
+
+ If you experience problems on GNU/Linux that are related to
+ pthreads, you might try this option. Guile with then not link with
+ the pthreads library, but will also not try to be compatible to
+ programs that use both libguile and libpthread.
+
+
+--with-modules --- Specify statically linked `modules'
+
+ Guile can dynamically load `plugin modules' during runtime, using
+ facilities provided by libtool. Not all platforms support this,
+ however. On these platforms, you can statically link the plugin
+ modules into libguile when Guile itself is build. XXX - how does
+ one specify the modules?
+
+
+--enable-deprecated=LEVEL --- Control the inclusion of deprecated features.
+
+ You can select between different behaviours via the LEVEL argument:
+ a value of "no" will omit all deprecated features and you will get
+ "undefined reference", "variable unbound" or similar errors when you
+ try to use them. All other values will include all deprecated
+ features. The LEVEL argument is used to determine the default value
+ for the environment variable GUILE_WARN_DEPRECATED. See the README
+ for more information.
+
+ The default is to get a vague warning at program exit if deprecated
+ features were used:
+
+ --enable-deprecated=yes
+ --enable-deprecated=summary
+
+ To get a detailed warning at first use of a deprecated feature:
+
+ --enable-deprecated=detailed
+
+ To get no warnings:
+
+ --enable-deprecated=shutup
+
+ To omit deprecated features completely and irrevokably:
+
+ --enable-deprecated=no
+
+
+--disable-shared --- Do not build shared libraries.
+--disable-static --- Do not build static libraries.
+
+ Normally, both static and shared libraries will be built if your
+ system supports them.
+
+
+--enable-debug-freelist --- Enable freelist debugging.
+
+ This enables a debugging version of SCM_NEWCELL(), and also
+ registers an extra primitive, the setter
+ `gc-set-debug-check-freelist!'.
+
+ Configure with the --enable-debug-freelist option to enable the
+ gc-set-debug-check-freelist! primitive, and then use:
+
+ (gc-set-debug-check-freelist! #t) # turn on checking of the freelist
+ (gc-set-debug-check-freelist! #f) # turn off checking
+
+ Checking of the freelist forces a traversal of the freelist and a
+ garbage collection before each allocation of a cell. This can slow
+ down the interpreter dramatically, so the setter should be used to
+ turn on this extra processing only when necessary.
+
+
+--enable-debug-malloc --- Enable malloc debugging.
+
+ Include code for debugging of calls to scm_must_malloc/realloc/free.
+
+ Checks that
+
+ 1. objects freed by scm_must_free has been mallocated by scm_must_malloc
+ 2. objects reallocated by scm_must_realloc has been allocated by
+ scm_must_malloc
+ 3. reallocated objects are reallocated with the same what string
+
+ But, most importantly, it records the number of allocated objects of
+ each kind. This is useful when searching for memory leaks.
+
+ A Guile compiled with this option provides the primitive
+ `malloc-stats' which returns an alist with pairs of kind and the
+ number of objects of that kind.
+
+
+--enable-guile-debug --- Include internal debugging functions
+--disable-arrays --- omit array and uniform array support
+--disable-posix --- omit posix interfaces
+--disable-networking --- omit networking interfaces
+--disable-regex --- omit regular expression interfaces
+
+
+Cross building Guile =====================================================
+
+As of guile-1.5.x, the build process uses compiled C files for
+snarfing, and (indirectly, through libtool) for linking, and uses the
+guile executable for generating documentation.
+
+When cross building guile, you first need to configure, build and
+install guile for your build host.
+
+Then, you may configure guile for cross building, eg:
+
+ ./configure --host=i686-pc-cygwin --disable-shared
+
+Two special options for cross building are available:
+
+--with-cc-for-build --- native C compiler, to be used during build
+ defaults to: `PATH=/usr/bin:$PATH cc'
+
+--with-guile-for-build --- native Guile executable, to be used during build
+ defaults to: `guile', assuming you just
+ installed this guile natively.
+
+
+Using Guile Without Installing It =========================================
+
+If you want to run Guile without installing it, set the environment
+variable `GUILE_LOAD_PATH' to a colon-separated list of directories,
+including the directory containing this INSTALL file. If you used a
+separate build directory, you'll need to include the build directory
+in the path as well.
+
+For example, suppose the Guile distribution unpacked into a directory
+called `/home/jimb/guile-snap' (so the full name of this INSTALL file
+would be `/home/jimb/guile-snap/INSTALL'). Then you might say, if
+you're using Bash or any other Bourne shell variant,
+
+ export GUILE_LOAD_PATH=/home/jimb/guile-snap
+
+or if you're using CSH or one of its variants:
+
+ setenv GUILE_LOAD_PATH /home/jimb/guile-snap
+
+You will additionally need to set your `LTDL_LIBRARY_PATH' environment
+variable to the directory in which the compiled SRFI support modules
+are created if you want to use the modules for SRFI-4, SRFI-13 or
+SRFI-14 support. Similar to the example above, this will be,
+
+ export LTDL_LIBRARY_PATH=/home/jimb/guile-snap/srfi/.libs
+
+or if you're using CSH or one of its variants:
+
+ setenv LTDL_LIBRARY_PATH /home/jimb/guile-snap/srfi/.libs
+
+
+Installing SLIB ===========================================================
+
+In order to use SLIB from Guile you basically only need to put the
+`slib' directory _in_ one of the directories on Guile's load path.
+
+The standard installation is:
+
+ 1. Obtain slib from http://www-swiss.ai.mit.edu/~jaffer/SLIB.html
+
+ 2. Put it in Guile's data directory, that is the directory printed when
+ you type
+
+ guile-config info pkgdatadir
+
+ at the shell prompt. This is normally `/usr/local/share/guile', so the
+ directory will normally have full path `/usr/local/share/guile/slib'.
+
+ 3. Start guile as a user with write access to the data directory and type
+
+ (use-modules (ice-9 slib))
+
+ at the Guile prompt. This will generate the slibcat catalog next to
+ the slib directory.
+
+SLIB's `require' is provided by the Guile module (ice-9 slib).
+
+Example:
+
+ (use-modules (ice-9 slib))
+ (require 'primes)
+ (prime? 7)
+
+
+Generic Instructions for Building Auto-Configured Packages ================
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. You can give `configure'
+initial values for variables by setting them in the environment. Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+ CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+ env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory. After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+ CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+ If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+ Use and save the results of the tests in FILE instead of
+ `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ debugging `configure'.
+
+`--help'
+ Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--version'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
HCoop / bpt / guile.git / commitdiff