-dnl On the NeXT, #including <utime.h> doesn't give you a definition for
-dnl struct utime, unless you #define _POSIX_SOURCE.
-
-AC_DEFUN(GUILE_STRUCT_UTIMBUF, [
- AC_CACHE_CHECK([whether we need POSIX to get struct utimbuf],
- guile_cv_struct_utimbuf_needs_posix,
- [AC_TRY_CPP([
-#ifdef __EMX__
-#include <sys/utime.h>
-#else
-#include <utime.h>
-#endif
-struct utime blah;
-],
- guile_cv_struct_utimbuf_needs_posix=no,
- guile_cv_struct_utimbuf_needs_posix=yes)])
- if test "$guile_cv_struct_utimbuf_needs_posix" = yes; then
- AC_DEFINE(UTIMBUF_NEEDS_POSIX)
- fi])
-
-
-
-
-dnl
-dnl Apparently, at CMU they have a weird version of libc.h that is
-dnl installed in /usr/local/include and conflicts with unistd.h.
-dnl In these situations, we should not #include libc.h.
-dnl This test arranges to #define LIBC_H_WITH_UNISTD_H iff libc.h is
-dnl present on the system, and is safe to #include.
-dnl
-AC_DEFUN([GUILE_HEADER_LIBC_WITH_UNISTD],
- [
- AC_CHECK_HEADERS(libc.h unistd.h)
- AC_CACHE_CHECK(
- "whether libc.h and unistd.h can be included together",
- guile_cv_header_libc_with_unistd,
- [
- if test "$ac_cv_header_libc_h" = "no"; then
- guile_cv_header_libc_with_unistd="no"
- elif test "$ac_cv_header_unistd.h" = "no"; then
- guile_cv_header_libc_with_unistd="yes"
- else
- AC_TRY_COMPILE(
- [
-# include <libc.h>
-# include <unistd.h>
- ],
- [],
- [guile_cv_header_libc_with_unistd=yes],
- [guile_cv_header_libc_with_unistd=no]
- )
- fi
- ]
- )
- if test "$guile_cv_header_libc_with_unistd" = yes; then
- AC_DEFINE(LIBC_H_WITH_UNISTD_H)
- fi
- ]
-)
-
-
-
-dnl This is needed when we want to check for the same function repeatedly
-dnl with other parameters, such as libraries, varying.
-dnl
-dnl GUILE_NAMED_CHECK_FUNC(FUNCTION, TESTNAME,
-dnl [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-AC_DEFUN(GUILE_NAMED_CHECK_FUNC,
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(ac_cv_func_$1_$2,
-[AC_TRY_LINK(
-dnl Don't include <ctype.h> because on OSF/1 3.0 it includes <sys/types.h>
-dnl which includes <sys/select.h> which contains a prototype for
-dnl select. Similarly for bzero.
-[/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $1(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
-extern "C"
-#endif
-])dnl
-[/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $1();
-], [
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$1) || defined (__stub___$1)
-choke me
-#else
-$1();
-#endif
-], eval "ac_cv_func_$1_$2=yes", eval "ac_cv_func_$1_$2=no")])
-if eval "test \"`echo '$ac_cv_func_'$1'_'$2`\" = yes"; then
- AC_MSG_RESULT(yes)
- ifelse([$3], , :, [$3])
-else
- AC_MSG_RESULT(no)
-ifelse([$4], , , [$4
-])dnl
-fi
-])
-
-
-
-dnl Check checks whether dlsym (if present) requires a leading underscore.
-dnl Written by Dan Hagerty <hag@ai.mit.edu> for scsh-0.5.0.
-AC_DEFUN(GUILE_DLSYM_USCORE, [
- AC_MSG_CHECKING(for underscore before symbols)
- AC_CACHE_VAL(guile_cv_uscore,[
- echo "main(){int i=1;}
- fnord(){int i=23; int ltuae=42;}" > conftest.c
- ${CC} conftest.c > /dev/null
- if (nm a.out | grep _fnord) > /dev/null; then
- guile_cv_uscore=yes
- else
- guile_cv_uscore=no
- fi])
- AC_MSG_RESULT($guile_cv_uscore)
- rm -f conftest.c a.out
-
- if test $guile_cv_uscore = yes; then
- AC_DEFINE(USCORE)
-
- if test $ac_cv_func_dlopen = yes -o $ac_cv_lib_dl_dlopen = yes ; then
- AC_MSG_CHECKING(whether dlsym always adds an underscore for us)
- AC_CACHE_VAL(guile_cv_dlsym_adds_uscore,AC_TRY_RUN( [
-#include <dlfcn.h>
-#include <stdio.h>
-fnord() { int i=42;}
-main() { void *self, *ptr1, *ptr2; self=dlopen(NULL,RTLD_LAZY);
- if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
- if(ptr1 && !ptr2) exit(0); } exit(1); }
-], [guile_cv_dlsym_adds_uscore=yes
- AC_DEFINE(DLSYM_ADDS_USCORE) ], guile_cv_dlsym_adds_uscore=no,
- guile_cv_dlsym_adds_uscore=no))
-
- AC_MSG_RESULT($guile_cv_dlsym_adds_uscore)
- fi
- fi
-])
-
-dnl QTHREADS_CONFIGURE configures the QuickThreads package. The QT
-dnl sources should be in $srcdir/qt. If configuration succeeds, this
-dnl macro creates the appropriate symlinks in the qt object directory,
-dnl and sets the following variables, used in building libqthreads.a:
-dnl QTHREAD_LTLIBS --- set to libqthreads.la if configuration
-dnl succeeds, or the empty string if configuration fails.
-dnl qtmd_h, qtmds_s, qtmdc_c, qtdmdb_s --- the names of the machine-
-dnl dependent source files.
-dnl qthread_asflags --- flags to pass to the compiler when processing
-dnl assembly-language files.
-dnl
-dnl It also sets the following variables, which describe how clients
-dnl can link against libqthreads.a:
-dnl THREAD_PACKAGE --- set to "QT" if configuration succeeds, or
-dnl the empty string if configuration fails.
-dnl THREAD_CPPFLAGS --- set to `-I' flags for thread header files
-dnl THREAD_LIBS_LOCAL --- linker options for use in this source tree
-dnl THREAD_LIBS_INSTALLED --- linker options for use after this package
-dnl is installed
-dnl It would be nice if all thread configuration packages for Guile
-dnl followed the same conventions.
-dnl
-dnl All of the above variables will be substituted into Makefiles in
-dnl the usual autoconf fashion.
-dnl
-dnl We distinguish between THREAD_LIBS_LOCAL and
-dnl THREAD_LIBS_INSTALLED because the thread library might be in
-dnl this tree, and be built using libtool. This means that:
-dnl 1) when building other executables in this tree, one must
-dnl pass the relative path to the ../libfoo.la file, but
-dnl 2) once the whole package has been installed, users should
-dnl link using -lfoo.
-dnl Normally, we only care about the first case, but since the
-dnl guile-config script needs to give users all the flags they need
-dnl to link programs against guile, the GUILE_WITH_THREADS macro
-dnl needs to supply the second piece of information as well.
-dnl
-dnl This whole thing is a little confused about what ought to be
-dnl done in the top-level configure script, and what ought to be
-dnl taken care of in the subdirectory. For example, qtmds_s and
-dnl friends really ought not to be even mentioned in the top-level
-dnl configure script, but here they are.
-
-AC_DEFUN([QTHREADS_CONFIGURE],[
- AC_REQUIRE([AC_PROG_LN_S])
-
- AC_MSG_CHECKING(QuickThreads configuration)
- # How can we refer to the qt source directory from within the qt build
- # directory? For headers, we can rely on the fact that the qt src
- # directory appears in the #include path.
- qtsrcdir="`(cd $srcdir; pwd)`/qt"
-
- changequote(,)dnl We use [ and ] in a regexp in the case
-
- THREAD_PACKAGE=QT
- qthread_asflags=''
- case "$host" in
- i[3456]86-*-*)
- port_name=i386
- qtmd_h=md/i386.h
- qtmds_s=md/i386.s
- qtmdc_c=md/null.c
- qtdmdb_s=
- case "$host" in
- *-*-netbsd* )
- ## NetBSD needs to be told to pass the assembly code through
- ## the C preprocessor. Other GCC installations seem to do
- ## this by default, but NetBSD's doesn't. We could get the
- ## same effect by giving the file a name ending with .S
- ## instead of .s, but I don't see how to tell automake to do
- ## that.
- qthread_asflags='-x assembler-with-cpp'
- ;;
- esac
- ;;
- mips-sgi-irix[56]*)
- port_name=irix
- qtmd_h=md/mips.h
- qtmds_s=md/mips-irix5.s
- qtmdc_c=md/null.c
- qtdmdb_s=md/mips_b.s
- ;;
- mips-*-*)
- port_name=mips
- qtmd_h=md/mips.h
- qtmds_s=md/mips.s
- qtmdc_c=md/null.c
- qtdmdb_s=md/mips_b.s
- ;;
- sparc-*-sunos*)
- port_name=sparc-sunos
- qtmd_h=md/sparc.h
- qtmds_s=md/_sparc.s
- qtmdc_c=md/null.c
- qtdmdb_s=md/_sparc_b.s
- ;;
- sparc-*-*)
- port_name=sparc
- qtmd_h=md/sparc.h
- qtmds_s=md/sparc.s
- qtmdc_c=md/null.c
- qtdmdb_s=md/sparc_b.s
- ;;
- alpha*-*-*)
- port_name=alpha
- qtmd_h=md/axp.h
- qtmds_s=md/axp.s
- qtmdc_c=md/null.c
- qtdmdb_s=md/axp_b.s
- ;;
- *)
- echo "Unknown configuration; threads package disabled"
- THREAD_PACKAGE=""
- ;;
- esac
- changequote([, ])
-
- # Did configuration succeed?
- if test -n "$THREAD_PACKAGE"; then
- AC_MSG_RESULT($port_name)
- QTHREAD_LTLIBS=libqthreads.la
- THREAD_CPPFLAGS="-I$qtsrcdir -I../qt"
- THREAD_LIBS_LOCAL="../qt/libqthreads.la"
- THREAD_LIBS_INSTALLED="-lqthreads"
- else
- AC_MSG_RESULT(none; disabled)
- fi
-
- AC_SUBST(QTHREAD_LTLIBS)
- AC_SUBST(qtmd_h)
- AC_SUBST(qtmds_s)
- AC_SUBST(qtmdc_c)
- AC_SUBST(qtdmdb_s)
- AC_SUBST(qthread_asflags)
- AC_SUBST(THREAD_PACKAGE)
- AC_SUBST(THREAD_CPPFLAGS)
- AC_SUBST(THREAD_LIBS_LOCAL)
- AC_SUBST(THREAD_LIBS_INSTALLED)
-])
+dnl On the NeXT, #including <utime.h> doesn't give you a definition for
+dnl struct utime, unless you #define _POSIX_SOURCE.
+
+AC_DEFUN(GUILE_STRUCT_UTIMBUF, [
+ AC_CACHE_CHECK([whether we need POSIX to get struct utimbuf],
+ guile_cv_struct_utimbuf_needs_posix,
+ [AC_TRY_CPP([
+#ifdef __EMX__
+#include <sys/utime.h>
+#else
+#include <utime.h>
+#endif
+struct utime blah;
+],
+ guile_cv_struct_utimbuf_needs_posix=no,
+ guile_cv_struct_utimbuf_needs_posix=yes)])
+ if test "$guile_cv_struct_utimbuf_needs_posix" = yes; then
+ AC_DEFINE(UTIMBUF_NEEDS_POSIX)
+ fi])
+
+
+
+
+dnl
+dnl Apparently, at CMU they have a weird version of libc.h that is
+dnl installed in /usr/local/include and conflicts with unistd.h.
+dnl In these situations, we should not #include libc.h.
+dnl This test arranges to #define LIBC_H_WITH_UNISTD_H iff libc.h is
+dnl present on the system, and is safe to #include.
+dnl
+AC_DEFUN([GUILE_HEADER_LIBC_WITH_UNISTD],
+ [
+ AC_CHECK_HEADERS(libc.h unistd.h)
+ AC_CACHE_CHECK(
+ "whether libc.h and unistd.h can be included together",
+ guile_cv_header_libc_with_unistd,
+ [
+ if test "$ac_cv_header_libc_h" = "no"; then
+ guile_cv_header_libc_with_unistd="no"
+ elif test "$ac_cv_header_unistd_h" = "no"; then
+ guile_cv_header_libc_with_unistd="yes"
+ else
+ AC_TRY_COMPILE(
+ [
+# include <libc.h>
+# include <unistd.h>
+ ],
+ [],
+ [guile_cv_header_libc_with_unistd=yes],
+ [guile_cv_header_libc_with_unistd=no]
+ )
+ fi
+ ]
+ )
+ if test "$guile_cv_header_libc_with_unistd" = yes; then
+ AC_DEFINE(LIBC_H_WITH_UNISTD_H)
+ fi
+ ]
+)
+
+
+
+dnl This is needed when we want to check for the same function repeatedly
+dnl with other parameters, such as libraries, varying.
+dnl
+dnl GUILE_NAMED_CHECK_FUNC(FUNCTION, TESTNAME,
+dnl [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+AC_DEFUN(GUILE_NAMED_CHECK_FUNC,
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(ac_cv_func_$1_$2,
+[AC_TRY_LINK(
+dnl Don't include <ctype.h> because on OSF/1 3.0 it includes <sys/types.h>
+dnl which includes <sys/select.h> which contains a prototype for
+dnl select. Similarly for bzero.
+[/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $1(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
+extern "C"
+#endif
+])dnl
+[/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $1();
+], [
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$1) || defined (__stub___$1)
+choke me
+#else
+$1();
+#endif
+], eval "ac_cv_func_$1_$2=yes", eval "ac_cv_func_$1_$2=no")])
+if eval "test \"`echo '$ac_cv_func_'$1'_'$2`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ ifelse([$3], , :, [$3])
+else
+ AC_MSG_RESULT(no)
+ifelse([$4], , , [$4
+])dnl
+fi
+])
+
+
+## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+## Copyright (C) 1996-1999 Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$lt_target" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN(AC_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
+ else
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_srcdir}/libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl