Commit | Line | Data |
---|---|---|
0f2d19dd JB |
1 | /* classes: h_files */ |
2 | ||
729dbac3 DH |
3 | #ifndef SCM___SCM_H |
4 | #define SCM___SCM_H | |
8c494e99 | 5 | |
bd987b8e | 6 | /* Copyright (C) 1995,1996,1998,1999,2000,2001,2002 Free Software Foundation, Inc. |
8c494e99 | 7 | * |
0f2d19dd JB |
8 | * This program is free software; you can redistribute it and/or modify |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2, or (at your option) | |
11 | * any later version. | |
8c494e99 | 12 | * |
0f2d19dd JB |
13 | * This program is distributed in the hope that it will be useful, |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
8c494e99 | 17 | * |
0f2d19dd JB |
18 | * You should have received a copy of the GNU General Public License |
19 | * along with this software; see the file COPYING. If not, write to | |
82892bed JB |
20 | * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, |
21 | * Boston, MA 02111-1307 USA | |
0f2d19dd JB |
22 | * |
23 | * As a special exception, the Free Software Foundation gives permission | |
24 | * for additional uses of the text contained in its release of GUILE. | |
25 | * | |
26 | * The exception is that, if you link the GUILE library with other files | |
27 | * to produce an executable, this does not by itself cause the | |
28 | * resulting executable to be covered by the GNU General Public License. | |
29 | * Your use of that executable is in no way restricted on account of | |
30 | * linking the GUILE library code into it. | |
31 | * | |
32 | * This exception does not however invalidate any other reasons why | |
33 | * the executable file might be covered by the GNU General Public License. | |
34 | * | |
35 | * This exception applies only to the code released by the | |
36 | * Free Software Foundation under the name GUILE. If you copy | |
37 | * code from other Free Software Foundation releases into a copy of | |
38 | * GUILE, as the General Public License permits, the exception does | |
39 | * not apply to the code that you add in this way. To avoid misleading | |
40 | * anyone as to the status of such modified files, you must delete | |
41 | * this exception notice from them. | |
42 | * | |
43 | * If you write modifications of your own for GUILE, it is your choice | |
44 | * whether to permit this exception to apply to your modifications. | |
82892bed | 45 | * If you do not wish that, delete this exception notice. */ |
8c494e99 | 46 | |
0f2d19dd | 47 | \f |
176067df | 48 | |
92e6989f RB |
49 | /********************************************************************** |
50 | This file is Guile's central public header. | |
51 | ||
52 | When included by other files, this file should preceed any include | |
53 | other than __scm.h. | |
54 | ||
55 | Under *NO* circumstances should new items be added to the global | |
56 | namespace (via adding #define, typedef, or similar to this file) with | |
57 | generic names. This usually means that any new names should be | |
58 | prefixed by either SCM_ or GUILE_. i.e. do *not* #define HAVE_FOO or | |
59 | SIZEOF_BAR. See configure.in, gen-scmconfig.h.in, and | |
60 | gen-scmconfig.c for examples of how to properly handle this issue. | |
61 | The main documentation is in gen-scmconfig.c. | |
62 | ||
63 | "What's the difference between _scm.h and __scm.h?" | |
176067df JB |
64 | |
65 | _scm.h is not installed; it's only visible to the libguile sources | |
92e6989f | 66 | themselves, and it includes config.h, the private config header. |
176067df JB |
67 | |
68 | __scm.h is installed, and is #included by <libguile.h>. If both | |
69 | the client and libguile need some piece of information, and it | |
70 | doesn't fit well into the header file for any particular module, it | |
92e6989f RB |
71 | should go in __scm.h. __scm.h includes scmconfig.h, the public |
72 | config header. | |
73 | **********************************************************************/ | |
74 | ||
75 | /* What did the configure script discover about the outside world? */ | |
76 | #include "libguile/scmconfig.h" | |
176067df | 77 | |
92e6989f | 78 | \f |
176067df | 79 | |
e81d98ec DH |
80 | /* {Compiler hints} |
81 | * | |
82 | * The following macros are used to provide additional information for the | |
83 | * compiler, which may help to do better error checking and code | |
84 | * optimization. A second benefit of these macros is, that they also provide | |
85 | * additional information to the developers. | |
86 | */ | |
87 | ||
88 | /* The macro SCM_NORETURN indicates that a function will never return. | |
89 | * Examples: | |
90 | * 1) int foo (char arg) SCM_NORETURN; | |
91 | */ | |
92 | #ifdef __GNUC__ | |
93 | #define SCM_NORETURN __attribute__ ((noreturn)) | |
94 | #else | |
95 | #define SCM_NORETURN | |
96 | #endif | |
97 | ||
98 | /* The macro SCM_UNUSED indicates that a function, function argument or | |
99 | * variable may potentially be unused. | |
100 | * Examples: | |
101 | * 1) static int unused_function (char arg) SCM_UNUSED; | |
102 | * 2) int foo (char unused_argument SCM_UNUSED); | |
103 | * 3) int unused_variable SCM_UNUSED; | |
104 | */ | |
105 | #ifdef __GNUC__ | |
106 | #define SCM_UNUSED __attribute__ ((unused)) | |
107 | #else | |
108 | #define SCM_UNUSED | |
109 | #endif | |
110 | ||
111 | ||
0f2d19dd JB |
112 | /* {Supported Options} |
113 | * | |
114 | * These may be defined or undefined. | |
115 | */ | |
116 | ||
16d35552 | 117 | /* #define GUILE_DEBUG_FREELIST */ |
70d63753 | 118 | |
0f2d19dd JB |
119 | /* All the number support there is. |
120 | */ | |
0f2d19dd JB |
121 | #define BIGNUMS |
122 | ||
686765af ML |
123 | /* GC should relinquish empty cons-pair arenas. */ |
124 | /* cmm:FIXME look at this after done mangling the GC */ | |
125 | /* #define GC_FREE_SEGMENTS */ | |
0f2d19dd JB |
126 | |
127 | /* Provide a scheme-accessible count-down timer that | |
128 | * generates a pseudo-interrupt. | |
129 | */ | |
130 | #define TICKS | |
131 | ||
132 | ||
133 | /* Use engineering notation when converting numbers strings? | |
134 | */ | |
135 | #undef ENGNOT | |
136 | ||
0f2d19dd JB |
137 | \f |
138 | /* {Unsupported Options} | |
139 | * | |
3c205827 | 140 | * These must be defined as given here. |
0f2d19dd JB |
141 | */ |
142 | ||
143 | ||
144 | #define CCLO | |
3c205827 JB |
145 | |
146 | /* Guile Scheme supports the #f/() distinction; Guile Lisp won't. We | |
147 | have horrible plans for their unification. */ | |
148 | #undef SICP | |
0f2d19dd JB |
149 | |
150 | \f | |
151 | ||
80c78696 | 152 | /* Random options (not yet supported or in final form). */ |
0f2d19dd | 153 | |
80c78696 MD |
154 | #define STACK_CHECKING |
155 | #undef NO_CEVAL_STACK_CHECKING | |
0f2d19dd | 156 | |
43ff3170 | 157 | \f |
3a9809df | 158 | |
1174045c MV |
159 | /* SCM_API is a macro prepended to all function and data definitions |
160 | which should be exported or imported in the resulting dynamic link | |
8f99e3f3 | 161 | library (DLL) in the Win32 port. */ |
1174045c | 162 | |
8f99e3f3 | 163 | #if defined (SCM_IMPORT) |
1174045c | 164 | # define SCM_API __declspec (dllimport) extern |
8f99e3f3 | 165 | #elif defined (SCM_EXPORT) || defined (DLL_EXPORT) |
1174045c MV |
166 | # define SCM_API __declspec (dllexport) extern |
167 | #else | |
168 | # define SCM_API extern | |
169 | #endif | |
170 | ||
171 | \f | |
172 | ||
3a9809df DH |
173 | /* {Debugging Options} |
174 | * | |
175 | * These compile time options determine whether to include code that is only | |
176 | * useful for debugging guile itself or C level extensions to guile. The | |
177 | * common prefix for all option macros of this kind is "SCM_DEBUG_". It is | |
fce0b22d DH |
178 | * guaranteed that a macro named SCM_DEBUG_XXX is always defined (typically to |
179 | * either 0 or 1), i. e. there is no need to test for the undefined case. | |
180 | * This allows to use these definitions comfortably within code, as in the | |
181 | * following example: | |
3a9809df DH |
182 | * #define FOO do { if (SCM_DEBUG_XXX) bar(); else baz(); } while (0) |
183 | * Any sane compiler will remove the unused branch without any performance | |
184 | * penalty for the resulting code. | |
185 | * | |
186 | * Note: Some SCM_DEBUG_XXX options are not settable at configure time. | |
187 | * To change the value of such options you will have to edit this header | |
56100716 DH |
188 | * file or give suitable options to make, like: |
189 | * make all CFLAGS="-DSCM_DEBUG_XXX=1 ..." | |
3a9809df DH |
190 | */ |
191 | ||
192 | ||
c8a54c4b DH |
193 | /* The value of SCM_DEBUG determines the default for most of the not yet |
194 | * defined debugging options. This allows, for example, to enable most of the | |
195 | * debugging options by simply defining SCM_DEBUG as 1. | |
196 | */ | |
197 | #ifndef SCM_DEBUG | |
198 | #define SCM_DEBUG 0 | |
199 | #endif | |
200 | ||
46d53380 DH |
201 | /* If SCM_DEBUG_CELL_ACCESSES is set to 1, cell accesses will perform |
202 | * exhaustive parameter checking: It will be verified that cell parameters | |
203 | * actually point to a valid heap cell. Note: If this option is enabled, | |
204 | * guile will run about ten times slower than normally. | |
205 | */ | |
206 | #ifndef SCM_DEBUG_CELL_ACCESSES | |
207 | #define SCM_DEBUG_CELL_ACCESSES SCM_DEBUG | |
208 | #endif | |
209 | ||
216eedfc DH |
210 | /* If SCM_DEBUG_INTERRUPTS is set to 1, with every deferring and allowing of |
211 | * interrupts a consistency check will be performed. | |
212 | */ | |
213 | #ifndef SCM_DEBUG_INTERRUPTS | |
214 | #define SCM_DEBUG_INTERRUPTS SCM_DEBUG | |
215 | #endif | |
216 | ||
e81d98ec DH |
217 | /* If SCM_DEBUG_PAIR_ACCESSES is set to 1, accesses to cons cells will be |
218 | * exhaustively checked. Note: If this option is enabled, guile will run | |
219 | * slower than normally. | |
220 | */ | |
221 | #ifndef SCM_DEBUG_PAIR_ACCESSES | |
222 | #define SCM_DEBUG_PAIR_ACCESSES SCM_DEBUG | |
223 | #endif | |
224 | ||
af45e3b0 DH |
225 | /* If SCM_DEBUG_REST_ARGUMENT is set to 1, functions that take rest arguments |
226 | * will check whether the rest arguments are actually passed as a proper list. | |
227 | * Otherwise, if SCM_DEBUG_REST_ARGUMENT is 0, functions that take rest | |
228 | * arguments will take it for granted that these are passed as a proper list. | |
c8a54c4b | 229 | */ |
af45e3b0 DH |
230 | #ifndef SCM_DEBUG_REST_ARGUMENT |
231 | #define SCM_DEBUG_REST_ARGUMENT SCM_DEBUG | |
3a9809df DH |
232 | #endif |
233 | ||
fce0b22d DH |
234 | /* The macro SCM_DEBUG_TYPING_STRICTNESS indicates what level of type checking |
235 | * shall be performed with respect to the use of the SCM datatype. The macro | |
236 | * may be defined to one of the values 0, 1 and 2. | |
237 | * | |
238 | * A value of 0 means that there will be no compile time type checking, since | |
239 | * the SCM datatype will be declared as an integral type. This setting should | |
240 | * only be used on systems, where casting from integral types to pointers may | |
241 | * lead to loss of bit information. | |
242 | * | |
243 | * A value of 1 means that there will an intermediate level of compile time | |
244 | * type checking, since the SCM datatype will be declared as a pointer to an | |
245 | * undefined struct. This setting is the default, since it does not cost | |
246 | * anything in terms of performance or code size. | |
247 | * | |
248 | * A value of 2 provides a maximum level of compile time type checking since | |
249 | * the SCM datatype will be declared as a struct. This setting should be used | |
250 | * for _compile time_ type checking only, since the compiled result is likely | |
251 | * to be quite inefficient. The right way to make use of this option is to do | |
252 | * a 'make clean; make CFLAGS=-DSCM_DEBUG_TYPING_STRICTNESS=2', fix your | |
56100716 | 253 | * errors, and then do 'make clean; make'. |
c8a54c4b | 254 | */ |
56100716 | 255 | #ifndef SCM_DEBUG_TYPING_STRICTNESS |
729dbac3 | 256 | #define SCM_DEBUG_TYPING_STRICTNESS 1 |
56100716 DH |
257 | #endif |
258 | ||
3a9809df DH |
259 | \f |
260 | ||
8c494e99 DH |
261 | /* {Feature Options} |
262 | * | |
263 | * These compile time options determine whether code for certain features | |
264 | * should be compiled into guile. The common prefix for all option macros | |
265 | * of this kind is "SCM_ENABLE_". It is guaranteed that a macro named | |
266 | * SCM_ENABLE_XXX is defined to be either 0 or 1, i. e. there is no need to | |
267 | * test for the undefined case. This allows to use these definitions | |
268 | * comfortably within code, as in the following example: | |
269 | * #define FOO do { if (SCM_ENABLE_XXX) bar(); else baz(); } while (0) | |
270 | * Any sane compiler will remove the unused branch without any performance | |
271 | * penalty for the resulting code. | |
272 | * | |
273 | * Note: Some SCM_ENABLE_XXX options are not settable at configure time. | |
274 | * To change the value of such options you will have to edit this header | |
275 | * file or give suitable options to make, like: | |
276 | * make all CFLAGS="-DSCM_ENABLE_XXX=1 ..." | |
0f2d19dd | 277 | */ |
1be6b49c | 278 | |
8c494e99 DH |
279 | /* If SCM_ENABLE_DEPRECATED is set to 1, deprecated code will be included in |
280 | * guile, as well as some functions to issue run-time warnings about uses of | |
281 | * deprecated functions. | |
282 | */ | |
283 | #ifndef SCM_ENABLE_DEPRECATED | |
284 | #define SCM_ENABLE_DEPRECATED 0 | |
1be6b49c | 285 | #endif |
0f2d19dd | 286 | |
b971d089 | 287 | \f |
0f2d19dd | 288 | |
5c75b29f | 289 | /* {Architecture and compiler properties} |
0f2d19dd | 290 | * |
5c75b29f DH |
291 | * Guile as of today can only work on systems which fulfill at least the |
292 | * following requirements: | |
293 | * - long ints have at least 32 bits. | |
294 | * Guile's type system is based on this assumption. | |
295 | * - long ints consist of at least four characters. | |
296 | * It is assumed that cells, i. e. pairs of long ints, are eight character | |
297 | * aligned, because three bits of a cell pointer are used for type data. | |
298 | * - sizeof (void*) == sizeof (long int) | |
299 | * Pointers are stored in SCM objects, and sometimes SCM objects are passed | |
300 | * as void*. Thus, there has to be a one-to-one correspondence. | |
301 | * - numbers are encoded using two's complement. | |
302 | * The implementation of the bitwise scheme level operations is based on | |
303 | * this assumption. | |
304 | * - ... add more | |
0f2d19dd JB |
305 | */ |
306 | ||
5c75b29f DH |
307 | #ifdef CHAR_BIT |
308 | # define SCM_CHAR_BIT CHAR_BIT | |
309 | #else | |
310 | # define SCM_CHAR_BIT 8 | |
311 | #endif | |
312 | ||
313 | #ifdef LONG_BIT | |
314 | # define SCM_LONG_BIT LONG_BIT | |
315 | #else | |
316 | # define SCM_LONG_BIT (SCM_CHAR_BIT * sizeof (long) / sizeof (char)) | |
317 | #endif | |
318 | ||
319 | #ifdef UCHAR_MAX | |
320 | # define SCM_CHAR_CODE_LIMIT (UCHAR_MAX + 1L) | |
0f2d19dd | 321 | #else |
e2806c10 | 322 | # define SCM_CHAR_CODE_LIMIT 256L |
5c75b29f DH |
323 | #endif |
324 | ||
0f2d19dd JB |
325 | \f |
326 | ||
2a1d8241 | 327 | #include "libguile/tags.h" |
0f2d19dd JB |
328 | |
329 | \f | |
330 | #ifdef vms | |
331 | # ifndef CHEAP_CONTINUATIONS | |
332 | typedef int jmp_buf[17]; | |
333 | extern int setjump(jmp_buf env); | |
334 | extern int longjump(jmp_buf env, int ret); | |
335 | # define setjmp setjump | |
336 | # define longjmp longjump | |
337 | # else | |
338 | # include <setjmp.h> | |
339 | # endif | |
340 | #else /* ndef vms */ | |
341 | # ifdef _CRAY1 | |
342 | typedef int jmp_buf[112]; | |
343 | extern int setjump(jmp_buf env); | |
344 | extern int longjump(jmp_buf env, int ret); | |
345 | # define setjmp setjump | |
346 | # define longjmp longjump | |
347 | # else /* ndef _CRAY1 */ | |
348 | # include <setjmp.h> | |
349 | # endif /* ndef _CRAY1 */ | |
350 | #endif /* ndef vms */ | |
351 | ||
0f2d19dd JB |
352 | /* James Clark came up with this neat one instruction fix for |
353 | * continuations on the SPARC. It flushes the register windows so | |
3dd84ef1 | 354 | * that all the state of the process is contained in the stack. |
0f2d19dd JB |
355 | */ |
356 | ||
7c12f0ac | 357 | #if defined (sparc) || defined (__sparc__) || defined (__sparc) |
0f2d19dd JB |
358 | # define SCM_FLUSH_REGISTER_WINDOWS asm("ta 3") |
359 | #else | |
360 | # define SCM_FLUSH_REGISTER_WINDOWS /* empty */ | |
361 | #endif | |
362 | ||
3dd84ef1 | 363 | /* If stack is not longword aligned then |
0f2d19dd JB |
364 | */ |
365 | ||
366 | /* #define SHORT_ALIGN */ | |
367 | #ifdef THINK_C | |
368 | # define SHORT_ALIGN | |
369 | #endif | |
370 | #ifdef MSDOS | |
371 | # define SHORT_ALIGN | |
372 | #endif | |
373 | #ifdef atarist | |
374 | # define SHORT_ALIGN | |
375 | #endif | |
376 | ||
377 | #ifdef SHORT_ALIGN | |
378 | typedef short SCM_STACKITEM; | |
379 | #else | |
380 | typedef long SCM_STACKITEM; | |
381 | #endif | |
382 | \f | |
383 | ||
9f0e55a6 MD |
384 | #define SCM_ASYNC_TICK /*fixme* should change names */ \ |
385 | do { \ | |
1ceead47 | 386 | if (scm_root->pending_asyncs) \ |
9f0e55a6 MD |
387 | scm_async_click (); \ |
388 | } while (0) | |
25d3ee9d | 389 | |
0f2d19dd | 390 | |
8417b665 JB |
391 | /* Anthony Green writes: |
392 | When the compiler sees... | |
393 | DEFER_INTS; | |
394 | [critical code here] | |
395 | ALLOW_INTS; | |
396 | ...it doesn't actually promise to keep the critical code within the | |
397 | boundries of the DEFER/ALLOW_INTS instructions. It may very well | |
398 | schedule it outside of the magic defined in those macros. | |
399 | ||
400 | However, GCC's volatile asm feature forms a barrier over which code is | |
401 | never moved. So if you add... | |
35eec738 JB |
402 | asm (""); |
403 | ...to each of the DEFER_INTS and ALLOW_INTS macros, the critical | |
404 | code will always remain in place. asm's without inputs or outputs | |
405 | are implicitly volatile. */ | |
8417b665 | 406 | #ifdef __GNUC__ |
35eec738 | 407 | #define SCM_FENCE asm /* volatile */ ("") |
8417b665 JB |
408 | #else |
409 | #define SCM_FENCE | |
410 | #endif | |
411 | ||
28d52ebb | 412 | #define SCM_DEFER_INTS scm_rec_mutex_lock (&scm_i_defer_mutex); |
0f2d19dd | 413 | |
28d52ebb | 414 | #define SCM_ALLOW_INTS scm_rec_mutex_unlock (&scm_i_defer_mutex); |
0f2d19dd | 415 | |
c7fabadf | 416 | #define SCM_REDEFER_INTS SCM_DEFER_INTS |
0f2d19dd | 417 | |
c7fabadf | 418 | #define SCM_REALLOW_INTS SCM_ALLOW_INTS |
0f2d19dd | 419 | |
c72cc5fb | 420 | #define SCM_TICK \ |
bfc69694 | 421 | do { \ |
cd911565 | 422 | SCM_ASYNC_TICK; \ |
216eedfc | 423 | SCM_THREAD_SWITCHING_CODE; \ |
bfc69694 | 424 | } while (0) |
0f2d19dd JB |
425 | |
426 | \f | |
427 | ||
9bc4701c MD |
428 | /* Note: The following needs updating. */ |
429 | ||
f83e2737 MD |
430 | /* Classification of critical sections |
431 | * | |
432 | * When Guile moves to POSIX threads, it won't be possible to prevent | |
433 | * context switching. In fact, the whole idea of context switching is | |
434 | * bogus if threads are run by different processors. Therefore, we | |
435 | * must ultimately eliminate all critical sections or enforce them by | |
436 | * use of mutecis. | |
437 | * | |
438 | * All instances of SCM_DEFER_INTS and SCM_ALLOW_INTS should therefore | |
439 | * be classified and replaced by one of the delimiters below. If you | |
440 | * understand what this is all about, I'd like to encourage you to | |
441 | * help with this task. The set of classes below must of course be | |
442 | * incrementally augmented. | |
443 | * | |
444 | * MDJ 980419 <djurfeldt@nada.kth.se> | |
445 | */ | |
446 | ||
447 | /* A sections | |
448 | * | |
449 | * Allocation of a cell with type tag in the CAR. | |
450 | * | |
451 | * With POSIX threads, each thread will have a private pool of free | |
452 | * cells. Therefore, this type of section can be removed. But! It | |
453 | * is important that the CDR is initialized first (with the CAR still | |
454 | * indicating a free cell) so that we can guarantee a consistent heap | |
455 | * at all times. | |
456 | */ | |
457 | ||
216eedfc DH |
458 | #define SCM_ENTER_A_SECTION SCM_CRITICAL_SECTION_START |
459 | #define SCM_EXIT_A_SECTION SCM_CRITICAL_SECTION_END | |
f83e2737 MD |
460 | |
461 | \f | |
462 | ||
0f2d19dd | 463 | /** SCM_ASSERT |
3dd84ef1 | 464 | ** |
0f2d19dd JB |
465 | **/ |
466 | ||
467 | ||
468 | #ifdef SCM_RECKLESS | |
469 | #define SCM_ASSERT(_cond, _arg, _pos, _subr) | |
23deee81 | 470 | #define SCM_ASSERT_TYPE(_cond, _arg, _pos, _subr, _msg) |
0f2d19dd JB |
471 | #define SCM_ASRTGO(_cond, _label) |
472 | #else | |
473 | #define SCM_ASSERT(_cond, _arg, _pos, _subr) \ | |
474 | if (!(_cond)) \ | |
b3fcac34 | 475 | scm_wrong_type_arg (_subr, _pos, _arg) |
b6791b2e GB |
476 | #define SCM_ASSERT_TYPE(_cond, _arg, _pos, _subr, _msg) \ |
477 | if (!(_cond)) \ | |
478 | scm_wrong_type_arg_msg(_subr, _pos, _arg, _msg) | |
0f2d19dd JB |
479 | #define SCM_ASRTGO(_cond, _label) \ |
480 | if (!(_cond)) \ | |
481 | goto _label | |
482 | #endif | |
95b88819 | 483 | |
9de33deb MD |
484 | /* |
485 | * SCM_WTA_DISPATCH | |
486 | */ | |
487 | ||
451e591c DH |
488 | /* Dirk:FIXME:: In all of the SCM_WTA_DISPATCH_* macros it is assumed that |
489 | * 'gf' is zero if uninitialized. It would be cleaner if some valid SCM value | |
490 | * like SCM_BOOL_F or SCM_UNDEFINED was chosen. | |
491 | */ | |
492 | ||
1174045c | 493 | SCM_API SCM scm_call_generic_0 (SCM gf); |
b3c8a0f5 | 494 | |
e68fc829 | 495 | #define SCM_WTA_DISPATCH_0(gf, subr) \ |
c07b3fef MD |
496 | return (SCM_UNPACK (gf) \ |
497 | ? scm_call_generic_0 ((gf)) \ | |
e68fc829 MV |
498 | : (scm_error_num_args_subr ((subr)), SCM_UNSPECIFIED)) |
499 | #define SCM_GASSERT0(cond, gf, subr) \ | |
500 | if (!(cond)) SCM_WTA_DISPATCH_0((gf), (subr)) | |
b3c8a0f5 | 501 | |
1174045c | 502 | SCM_API SCM scm_call_generic_1 (SCM gf, SCM a1); |
9de33deb | 503 | |
c07b3fef MD |
504 | #define SCM_WTA_DISPATCH_1(gf, a1, pos, subr) \ |
505 | return (SCM_UNPACK (gf) \ | |
506 | ? scm_call_generic_1 ((gf), (a1)) \ | |
507 | : (scm_wrong_type_arg ((subr), (pos), (a1)), SCM_UNSPECIFIED)) | |
9de33deb MD |
508 | #define SCM_GASSERT1(cond, gf, a1, pos, subr) \ |
509 | if (!(cond)) SCM_WTA_DISPATCH_1((gf), (a1), (pos), (subr)) | |
510 | ||
1174045c | 511 | SCM_API SCM scm_call_generic_2 (SCM gf, SCM a1, SCM a2); |
9de33deb | 512 | |
c07b3fef MD |
513 | #define SCM_WTA_DISPATCH_2(gf, a1, a2, pos, subr) \ |
514 | return (SCM_UNPACK (gf) \ | |
515 | ? scm_call_generic_2 ((gf), (a1), (a2)) \ | |
516 | : (scm_wrong_type_arg ((subr), (pos), \ | |
517 | (pos) == SCM_ARG1 ? (a1) : (a2)), \ | |
518 | SCM_UNSPECIFIED)) | |
9de33deb MD |
519 | #define SCM_GASSERT2(cond, gf, a1, a2, pos, subr) \ |
520 | if (!(cond)) SCM_WTA_DISPATCH_2((gf), (a1), (a2), (pos), (subr)) | |
521 | ||
1174045c | 522 | SCM_API SCM scm_apply_generic (SCM gf, SCM args); |
89c358b1 | 523 | |
c07b3fef MD |
524 | #define SCM_WTA_DISPATCH_n(gf, args, pos, subr) \ |
525 | return (SCM_UNPACK (gf) \ | |
526 | ? scm_apply_generic ((gf), (args)) \ | |
527 | : (scm_wrong_type_arg ((subr), (pos), \ | |
528 | scm_list_ref ((args), \ | |
529 | SCM_MAKINUM ((pos) - 1))), \ | |
530 | SCM_UNSPECIFIED)) | |
89c358b1 MD |
531 | #define SCM_GASSERTn(cond, gf, args, pos, subr) \ |
532 | if (!(cond)) SCM_WTA_DISPATCH_n((gf), (args), (pos), (subr)) | |
533 | ||
c751e5e3 GB |
534 | #ifndef SCM_MAGIC_SNARFER |
535 | /* Let these macros pass through if | |
536 | we are snarfing; thus we can tell the | |
537 | difference between the use of an actual | |
538 | number vs. the use of one of these macros -- | |
f5421cfc | 539 | actual numbers in SCM_VALIDATE_* and SCM_ASSERT |
c751e5e3 GB |
540 | constructs must match the formal argument name, |
541 | but using SCM_ARG* avoids the test */ | |
542 | ||
0f2d19dd JB |
543 | #define SCM_ARGn 0 |
544 | #define SCM_ARG1 1 | |
545 | #define SCM_ARG2 2 | |
546 | #define SCM_ARG3 3 | |
547 | #define SCM_ARG4 4 | |
548 | #define SCM_ARG5 5 | |
1146b6cd | 549 | #define SCM_ARG6 6 |
3dd84ef1 | 550 | #define SCM_ARG7 7 |
0f2d19dd | 551 | |
c751e5e3 | 552 | #endif /* SCM_MAGIC_SNARFER */ |
0f2d19dd | 553 | |
0f2d19dd JB |
554 | \f |
555 | ||
556 | /* SCM_EXIT_SUCCESS is the default code to return from SCM if no errors | |
557 | * were encountered. SCM_EXIT_FAILURE is the default code to return from | |
558 | * SCM if errors were encountered. The return code can be explicitly | |
559 | * specified in a SCM program with (scm_quit <n>). | |
560 | */ | |
561 | ||
562 | #ifndef SCM_EXIT_SUCCESS | |
563 | #ifdef vms | |
564 | #define SCM_EXIT_SUCCESS 1 | |
565 | #else | |
566 | #define SCM_EXIT_SUCCESS 0 | |
567 | #endif /* def vms */ | |
568 | #endif /* ndef SCM_EXIT_SUCCESS */ | |
569 | #ifndef SCM_EXIT_FAILURE | |
570 | #ifdef vms | |
571 | #define SCM_EXIT_FAILURE 2 | |
572 | #else | |
573 | #define SCM_EXIT_FAILURE 1 | |
574 | #endif /* def vms */ | |
575 | #endif /* ndef SCM_EXIT_FAILURE */ | |
576 | ||
729dbac3 | 577 | #endif /* SCM___SCM_H */ |
89e00824 ML |
578 | |
579 | /* | |
580 | Local Variables: | |
581 | c-file-style: "gnu" | |
582 | End: | |
583 | */ |