@set VERSION 7.93
@c Edition of the manual. It is either empty for the first edition or
@c has the form ", nth Edition" (without the quotes).
-@set EDITION , 3rd Edition
-@set UPDATED 2006-03-14
+@set EDITION , 4th Edition
+@set UPDATED 2006-03-17
@set UPDATE-MONTH March, 2006
@c Other variables.
@node Sending Mail Tour, Reading Mail Tour, Tour Through MH-E, Tour Through MH-E
@section Sending Mail
+@cindex MH-Letter mode
+@cindex mode
+@cindex modes, MH-Letter
@cindex sending mail
@findex mh-smail
@kindex M-x mh-smail
Let's start our tour by sending ourselves a message which we can later
read and process. Enter @kbd{M-x mh-smail} to invoke the MH-E program
-to send messages. You will be prompted in the minibuffer by
-@samp{To:}. Enter your login name. The next prompt is @samp{Cc:}. Hit
-@key{RET} to indicate that no carbon copies are to be sent. At the
-@samp{Subject:} prompt, enter @kbd{Test} or anything else that comes
-to mind.
+to send messages. Your message appears in an Emacs buffer whose
+mode@footnote{A @dfn{mode} changes Emacs to make it easier to edit a
+particular type of text.} is MH-Letter.
-@cindex MH-Letter mode
-@cindex modes, MH-Letter
-@cindex mode
+Enter your login name in the @samp{To:} header field. Press the
+@key{TAB} twice to move the cursor past the @samp{Cc:} field, since no
+carbon copies are to be sent, and on to the @samp{Subject:} field.
+Enter @kbd{Test} or anything else that comes to mind.
-Once you've specified the recipients and subject, your message appears
-in an Emacs buffer whose mode@footnote{A @dfn{mode} changes Emacs to
-make it easier to edit a particular type of text.} is MH-Letter. Enter
-some text in the body of the message, using normal Emacs commands. You
-should now have something like this@footnote{If you're running Emacs
-under the X Window System, then you would also see a menu bar. Under
-Emacs 21, you would also see a tool bar. I've left out the menu bar and
-tool bar in all of the example screens.}:
+Press @key{TAB} again to move the cursor to the body of the message.
+Enter some text, using normal Emacs commands. You should now have
+something like this@footnote{If you're running Emacs under the X
+Window System, then you would also see a menu bar and a tool bar. I've
+left out the menu bar and tool bar in all of the example screens.}:
@cartouche
@smallexample
---:-- *scratch* (Lisp Interaction)--L1--All-------------------------
+--:-- *scratch* All L1 (Lisp Interaction)-------------------------
To: wohler
cc:
Subject: Test
+X-Mailer: MH-E 8.0; nmh 1.1; GNU Emacs 22.1
--------
This is a test message to get the wheels churning...#
---:** @{draft@} (MH-Letter)--L5--All-----------------------------------
-
+--:** @{draft@} All L5 (MH-Letter)----------------------------------
+Type C-c C-c to send message, C-C ? for help
@end smallexample
@end cartouche
@i{MH-E message composition window}
3 t08/24 root received fax files on Wed Aug 24 11:00:13 PDT 1
# 4+t08/24 To:wohler Test<<This is a test message to get the wheels
--:%% @{+inbox@} 4 msgs (1-4) (MH-Folder Show)--L4--Bot--------------
+-:%% @{+inbox/select@} 4 msgs (1-4) Bot L4 (MH-Folder Show)---------
To: wohler
Subject: Test
-Date: Wed, 24 Aug 1994 13:01:13 -0700
+X-Mailer: MH-E 8.0; nmh 1.1; GNU Emacs 22.1
+Date: Fri, 17 Mar 2006 10:49:11 -0800
From: Bill Wohler <wohler@@stop.mail-abuse.org>
This is a test message to get the wheels churning...
-
-
---:-- @{show-+inbox@} 4 (MH-Show)--L1--All---------------------------
+--:-- @{show-+inbox@} 4 All L1 (MH-Show)----------------------------
@end smallexample
@end cartouche
test message and type @kbd{r}. You are prompted in the minibuffer with
@samp{Reply to whom:}. Here MH-E is asking whether you'd like to reply
to the original sender only, to the sender and primary recipients, or
-to the sender and all recipients. If you simply hit @key{RET}, you'll
-reply only to the sender. Hit @key{RET} now.
+to the sender and all recipients. You can press @key{TAB} to see these
+choices. If you simply press @key{RET}, you'll reply only to the
+sender. Press @key{RET} now.
You'll find yourself in an Emacs buffer similar to that when you were
sending the original message, like this:
@cartouche
@smallexample
-To: wohler
-Subject: Re: Test
-In-reply-to: Bill Wohler's message of Wed, 24 Aug 1994 13:01:13 -0700
- <199408242001.NAA00505@@stop.mail-abuse.org>
+To:
+cc:
+Subject: Re: Test
+In-reply-to: <31054.1142621351@@stop.mail-abuse.org>
+References: <31054.1142621351@@stop.mail-abuse.org>
+Comments: In-reply-to Bill Wohler <wohler@@stop.mail-abuse.org>
+ message dated "Fri, 17 Mar 2006 10:49:11 -0800."
+X-Mailer: MH-E 8.0; nmh 1.1; GNU Emacs 22.1
--------
#
---:-- @{draft@} (MH-Letter)--L11--Bot---------------------------------
+--:-- @{draft@} All L10 (MH-Letter)----------------------------------
To: wohler
Subject: Test
-Date: Wed, 24 Aug 1994 13:01:13 -0700
+X-Mailer: MH-E 8.0; nmh 1.1; GNU Emacs 22.1
+Date: Fri, 17 Mar 2006 10:49:11 -0800
From: Bill Wohler <wohler@@stop.mail-abuse.org>
This is a test message to get the wheels churning...
---:-- @{show-+inbox@} 4 (MH-Show)--L1--All----------------------------
-Composing a reply...done
+--:-- @{show-+inbox@} 4 All L1 (MH-Show)----------------------------
+Type C-c C-c to send message, C-c ? for help
@end smallexample
@end cartouche
@i{Composition window during reply}
@findex display-time
-@lisp
+@smalllisp
(display-time)
-@end lisp
+@end smalllisp
@cindex @command{inc}
@cindex incorporating
Attachments in MH-E are indicated by @dfn{buttons} like this:
-@example
+@smallexample
[1. image/jpeg; foo.jpg]...
-@end example
+@end smallexample
@findex mh-next-button
@findex mh-press-button
part. However, if there is an HTML body part that is an attachment,
then you'll see a button like this:
-@example
+@smallexample
[1. text/html; foo.html]...
-@end example
+@end smallexample
To see how to read the contents of this body part, see @ref{Viewing
Attachments}.
@quotation
Use this hook with care. If there is a bug in your hook which returns
-@code{t} on @samp{+inbox} and you hit @kbd{k} by accident in the
+@code{t} on @samp{+inbox} and you press @kbd{k} by accident in the
@code{+inbox} folder, you will not be happy.
@end quotation
@sp 1
@cindex starting from command line
-@example
+@smallexample
$ @kbd{emacs -f mh-smail}
-@end example
+@end smallexample
@findex goto-address-at-point
@vindex mail-user-agent
Letter}). For example, let's assume you have the following in your
draft:
-@example
+@smallexample
@group
> Hopefully this gives you an idea of what I'm currently doing. I'm \
not sure yet whether I'm completely satisfied with my setup, but \
it's worked okay for me so far.
@end group
-@end example
+@end smallexample
Running @kbd{M-q} on this paragraph produces:
-@example
+@smallexample
@group
> Hopefully this gives you an idea of what I'm currently doing. I'm not
> sure yet whether I'm completely satisfied with my setup, but it's
> worked okay for me so far.
@end group
-@end example
+@end smallexample
@findex mh-open-line
@findex open-line
replies. For example, if this command was used when point was after
the first period in the paragraph above, the result would be this:
-@example
+@smallexample
@group
> Hopefully this gives you an idea of what I'm currently doing.
> sure yet whether I'm completely satisfied with my setup, but it's
> worked okay for me so far.
@end group
-@end example
+@end smallexample
@node Inserting Letter, Inserting Messages, Editing Message, Editing Drafts
@section Inserting Letter to Which You're Replying
you're replying, and inserting @code{mh-ins-buf-prefix} (@samp{> })
before each line.
-@example
+@smallexample
@group
Michael W Thelen <thelenm@@stop.mail-abuse.org> wrote:
> sure yet whether I'm completely satisfied with my setup, but it's
> worked okay for me so far.
@end group
-@end example
+@end smallexample
@vindex mh-extract-from-attribution-verb
---:%% @{+inbox@} 4 msgs (1-4) (MH-Folder Show)--L4--Bot---------------
+--:%% @{+inbox@} 4 msgs (1-4) Bot L4 (MH-Folder Show)---------------
To: wohler
cc:
Subject: Test of MIME
<#part type="image/x-xpm" filename="~/lib/images/setiathome.xpm"
disposition=inline description="SETI@@home logo">
<#/part>
---:** @{draft@} (MH-Letter)--L8--All----------------------------------
+--:** @{draft@} All L8 (MH-Letter)----------------------------------
@end smallexample
@end cartouche
To: wohler
cc:
Subject: Test of MIME
+X-Mailer: MH-E 8.0; nmh 1.1; GNU Emacs 22.1
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="=-=-="
--------
Content-Transfer-Encoding: base64
Content-Description: SETI@@home logo
-LyogWFBNICovCnN0YXRpYyBjaGFyICogc2V0aWF0aG9tZV94cG1bXSA9IHsKIjQ1IDQ1IDc2NCAy
---:-- @{draft@} (MH-Letter)--L2--Top----------------------------------
+LyogWFBNICovCnN0YXRpYyBjaGFyICogc2V0aWF0aG9tZV94cG1bXSA9IHsKIjQ1IDQ1IDc2N
+--:-- @{draft@} Top L1 (MH-Letter)----------------------------------
@end smallexample
@end cartouche
The command @kbd{C-c C-m C-s} (@code{mh-mml-secure-message-sign})
inserts the following tag:
-@example
+@smallexample
<#secure method=pgpmime mode=sign>
-@end example
+@end smallexample
This is used to sign your message digitally. Likewise, the command
@kbd{C-c C-m C-e} (@code{mh-mml-secure-message-encrypt}) inserts the
following tag:
-@example
+@smallexample
<#secure method=pgpmime mode=encrypt>
-@end example
+@end smallexample
This is used to encrypt your message. Finally, the command @kbd{C-c
C-m s e} (@code{mh-mml-secure-message-signencrypt}) inserts the
following tag:
-@example
+@smallexample
<#secure method=pgpmime mode=signencrypt>
-@end example
+@end smallexample
@findex mh-mml-unsecure-message
@kindex C-c C-m C-n
your aliases. You might use uppercase for mailing lists and lowercase
for people. For example, you might have:
-@example
+@smallexample
mark.baushke: Mark Baushke <mdb@@stop.mail-abuse.org>
MH-E: MH-E Mailing List <mh-e-devel@@stop.mail-abuse.org>
-@end example
+@end smallexample
When this option is turned off, if you were to type @kbd{M} in the
@samp{To:} field and then @kbd{M-@key{TAB}}, then you'd get the list;
For example, consider the following password file entry:
-@example
+@smallexample
psg:x:1000:1000:Peter S Galbraith,,,:/home/psg:/bin/tcsh
-@end example
+@end smallexample
@vindex mh-alias-local-users-prefix
might use prefixes for locales, jobs, or activities. For example, I
have:
-@example
+@smallexample
+@group
; Work
attensity.don.mitchell: Don Mitchell <dmitchell@@stop.mail-abuse.com>
isharp.don.mitchell: Don Mitchell <donaldsmitchell@@stop.mail-abuse.com>
; Personal
ariane.kolkmann: Ariane Kolkmann <ArianeKolkmann@@stop.mail-abuse.com>
...
-@end example
+@end group
+@end smallexample
Using prefixes instead of postfixes helps you explore aliases during
completion. If you forget the name of an old dive buddy, you can enter
@cartouche
@smallexample
-From: #
+From:
To:
Cc:
Date:
Subject:
--------
+#
-
---:** search-pattern (MH-Search)--L1--All-----------------------------
-
+--:** search-pattern All L7 (MH-Search)---------------------------
+Type C-c C-c to search messages, C-c C-p to use pick, C-c ? for help
@end smallexample
@end cartouche
@i{Search window}
format places a @samp{+} after the message number for the current
message according to MH; it also uses that column for notations.
-@example
+@smallexample
%20(decode(friendly@{from@})) %50(decode@{subject@}) %4(msg)%<(cur)+%| %>
-@end example
+@end smallexample
@vindex mh-adaptive-cmd-note-flag
@vindex mh-scan-format-file
@vindex mh-scan-valid-regexp, example
-@lisp
+@smalllisp
(setq mh-scan-valid-regexp "[0-9]+[+D^ ]$")
-@end lisp
+@end smalllisp
Now, in order to get rid of the @samp{Cursor not pointing to message}
message, you need to tell MH-E how to access the message number. You
@vindex mh-scan-msg-number-regexp, example
@vindex mh-scan-msg-search-regexp, example
-@lisp
+@smalllisp
(setq mh-scan-msg-number-regexp "^.* \\([0-9]+\\)[+D^ ]$")
(setq mh-scan-msg-search-regexp " %d[+D^ ]$")
-@end lisp
+@end smalllisp
In order to get the next and previous commands working, add this.
@vindex mh-scan-good-msg-regexp, example
-@lisp
+@smalllisp
(setq mh-scan-good-msg-regexp "^.* \\([0-9]+\\)[+D^ ]$")
-@end lisp
+@end smalllisp
Note that the current message isn't marked with a @samp{+} when moving
between the next and previous messages. Here is the code required to
@vindex set-mh-cmd-note, example
@vindex mh-scan-cur-msg-number-regexp, example
-@lisp
+@smalllisp
(set-mh-cmd-note 76)
(setq mh-scan-cur-msg-number-regexp "^.* \\([0-9]+\\)\\+$")
-@end lisp
+@end smalllisp
Finally, add the following to delete and refile messages.
@vindex mh-scan-deleted-msg-regexp, example
@vindex mh-scan-refiled-msg-regexp, example
-@lisp
+@smalllisp
(setq mh-scan-deleted-msg-regexp "^.* \\([0-9]+\\)D$")
(setq mh-scan-refiled-msg-regexp "^.* \\([0-9]+\\)\\^$")
-@end lisp
+@end smalllisp
This is just a bare minimum; it's best to adjust all of the regular
expressions to ensure that MH-E and highlighting perform well.
@samp{unseen} sequence by default, add the following line to your MH
profile:
-@example
+@smallexample
Unseen-Sequence: unseen
-@end example
+@end smallexample
Now view your new messages with the speedbar (@pxref{Speedbar}) or with
@kbd{F n} (@code{mh-index-new-messages}). @xref{Folders}.
to the GnuCash mailing list, substitute one to which you are
subscribed.
-@example
+@smallexample
MAILDIR=$HOME/`mhparam Path`
# Place mail sent to the GnuCash mailing list in gnucash.spool, where
# Gnus will pick it up.
:0:
* ^TO.*gnucash.*@.*gnucash.org
gnucash.spool
-@end example
+@end smallexample
Wait for some messages to appear in @file{gnucash.spool} and run Gnus
with @kbd{M-x gnus @key{RET}}. To view the folder created in the
HCoop / bpt / emacs.git / commitdiff