(require 'reftex)
;;;
+;; START remove for XEmacs release
(defvar mark-active)
(defvar zmacs-regions)
(defvar transient-mark-mode)
+;; END remove for XEmacs release
(defun reftex-index-selection-or-word (&optional arg phrase)
"Put selection or the word near point into the default index macro.
This uses the information in `reftex-index-default-macro' to make an index
;; exact (t) or approximate (nil).
(let ((docstruct (symbol-value reftex-docstruct-symbol))
- (cnt 0) rtn
+ (cnt 0) rtn rtn-if-no-other
found)
(save-excursion
(while (not rtn)
(setq rtn1 (car list) list nil))
((looking-at (reftex-make-regexp-allow-for-ctrl-m
(nth 7 (car list))))
- ;; Same title
- (setq rtn1 (car list) list nil cnt 2))))
+ ;; Same title: remember, but keep looking
+ (setq rtn-if-no-other (car list)))))
(pop list))
rtn1))
((match-end 7)
(symbol-value reftex-docstruct-symbol))))
(t
(error "This should not happen (reftex-where-am-I)"))))))
+ ;; Check if there was only a by-name match for the section.
+ (when (and (not rtn) rtn-if-no-other)
+ (setq rtn rtn-if-no-other
+ cnt 2))
(cons rtn (eq cnt 1))))
(defun reftex-notice-new (&optional n force)
;; Return a string with the current section number.
;; When LEVEL is non-nil, increase section numbers on that level.
(let* ((depth (1- (length reftex-section-numbers))) idx n (string "")
- (appendix (get 'reftex-section-numbers 'appendix)))
+ (appendix (get 'reftex-section-numbers 'appendix))
+ (partspecial (and (not reftex-part-resets-chapter)
+ (equal level 0))))
+ ;; partspecial means, this is a part statement.
+ ;; Parts do not reset the chapter counter, and the part number is
+ ;; not included in the numbering of other sectioning levels.
(when level
(when (and (> level -1) (not star))
(aset reftex-section-numbers
(setq idx (1+ level))
(when (not star)
(while (<= idx depth)
- (aset reftex-section-numbers idx 0)
+ (if (or (not partspecial)
+ (not (= idx 1)))
+ (aset reftex-section-numbers idx 0))
(incf idx))))
- (setq idx 0)
- (while (<= idx depth)
- (setq n (aref reftex-section-numbers idx))
- (setq string (concat string (if (not (string= string "")) "." "")
- (int-to-string n)))
- (incf idx))
- (save-match-data
- (if (string-match "\\`\\([@0]\\.\\)+" string)
- (setq string (replace-match "" nil nil string)))
- (if (string-match "\\(\\.0\\)+\\'" string)
- (setq string (replace-match "" nil nil string)))
- (if (and appendix
- (string-match "\\`[0-9]+" string))
- (setq string
- (concat
- (char-to-string
- (1- (+ ?A (string-to-int (match-string 0 string)))))
- (substring string (match-end 0))))))
- (if star
- (concat (make-string (1- (length string)) ?\ ) "*")
- string)))
+ (if partspecial
+ (setq string (concat "Part " (reftex-roman-number
+ (aref reftex-section-numbers 0))))
+ (setq idx (if reftex-part-resets-chapter 0 1))
+ (while (<= idx depth)
+ (setq n (aref reftex-section-numbers idx))
+ (if (not (and partspecial (not (equal string ""))))
+ (setq string (concat string (if (not (string= string "")) "." "")
+ (int-to-string n))))
+ (incf idx))
+ (save-match-data
+ (if (string-match "\\`\\([@0]\\.\\)+" string)
+ (setq string (replace-match "" nil nil string)))
+ (if (string-match "\\(\\.0\\)+\\'" string)
+ (setq string (replace-match "" nil nil string)))
+ (if (and appendix
+ (string-match "\\`[0-9]+" string))
+ (setq string
+ (concat
+ (char-to-string
+ (1- (+ ?A (string-to-int (match-string 0 string)))))
+ (substring string (match-end 0))))))
+ (if star
+ (concat (make-string (1- (length string)) ?\ ) "*")
+ string))))
+
+(defun reftex-roman-number (n)
+ ;; Return as a string the roman number equal to N.
+ (let ((nrest n)
+ (string "")
+ (list '((1000 . "M") ( 900 . "CM") ( 500 . "D") ( 400 . "CD")
+ ( 100 . "C") ( 90 . "XC") ( 50 . "L") ( 40 . "XL")
+ ( 10 . "X") ( 9 . "IX") ( 5 . "V") ( 4 . "IV")
+ ( 1 . "I")))
+ listel i s)
+ (while (>= nrest 1)
+ (setq listel (pop list)
+ i (car listel)
+ s (cdr listel))
+ (while (>= nrest i)
+ (setq string (concat string s)
+ nrest (- nrest i))))
+ string))
;;; reftex-parse.el ends here
(reftex-offer-label-menu type)))
(reftex-ensure-compiled-variables)
(set-marker reftex-select-return-marker nil)
- ;; If the first entry is the symbol 'concat, concat all all labels.
+ ;; If the first entry is the symbol 'concat, concat all labels.
;; We keep the cdr of the first label for typekey etc information.
(if (eq (car labels) 'concat)
(setq labels (list (list (mapconcat 'car (cdr labels) ",")
(defun reftex-format-fref (label def-fmt)
(format "\\fref{%s}" label))
+
+;(defun reftex-goto-label ()
+; (interactive)
+; (reftex-access-scan-info)
+; (let* ((docstruct (symbol-value reftex-docstruct-symbol))
+; (label (completing-read "Label: " docstruct
+; (lambda (x) (stringp (car x))) t))
+; (selection (assoc label docstruct)))
+; (reftex-show-label-location selection t nil 'stay)
+; (reftex-unhighlight 0)))
+
+(defun reftex-goto-label (&optional other-window)
+ "Prompt for a label (with completion) and jump to the location of this label.
+Optional prefix argument OTHER-WINDOW goes to the label in another window."
+ (interactive "P")
+ (reftex-access-scan-info)
+ (let* ((wcfg (current-window-configuration))
+ (docstruct (symbol-value reftex-docstruct-symbol))
+ (label (completing-read "Label: " docstruct
+ (lambda (x) (stringp (car x))) t))
+ (selection (assoc label docstruct))
+ (where (progn
+ (reftex-show-label-location selection t nil 'stay)
+ (point-marker))))
+ (unless other-window
+ (set-window-configuration wcfg)
+ (switch-to-buffer (marker-buffer where))
+ (goto-char where))
+ (reftex-unhighlight 0)))
+
+
+
;;; reftex-ref.el ends here
;; We do not set a local map - reftex-select-item does this.
(run-hooks 'reftex-select-bib-mode-hook))
+;;; (defun reftex-get-offset (buf here-am-I &optional typekey toc index file)
+;;; ;; Find the correct offset data, like insert-docstruct would, but faster.
+;;; ;; Buffer BUF knows the correct docstruct to use.
+;;; ;; Basically this finds the first docstruct entry after HERE-I-AM which
+;;; ;; is of allowed type. The optional arguments specify what is allowed.
+;;; (catch 'exit
+;;; (save-excursion
+;;; (set-buffer buf)
+;;; (reftex-access-scan-info)
+;;; (let* ((rest (memq here-am-I (symbol-value reftex-docstruct-symbol)))
+;;; entry)
+;;; (while (setq entry (pop rest))
+;;; (if (or (and typekey
+;;; (stringp (car entry))
+;;; (or (equal typekey " ")
+;;; (equal typekey (nth 1 entry))))
+;;; (and toc (eq (car entry) 'toc))
+;;; (and index (eq (car entry) 'index))
+;;; (and file
+;;; (memq (car entry) '(bof eof file-error))))
+;;; (throw 'exit entry)))
+;;; nil))))
+
(defun reftex-get-offset (buf here-am-I &optional typekey toc index file)
;; Find the correct offset data, like insert-docstruct would, but faster.
;; Buffer BUF knows the correct docstruct to use.
- ;; Basically this finds the first docstruct entry after HERE-I-AM which
+ ;; Basically this finds the first docstruct entry before HERE-I-AM which
;; is of allowed type. The optional arguments specify what is allowed.
(catch 'exit
(save-excursion
(set-buffer buf)
(reftex-access-scan-info)
- (let* ((rest (memq here-am-I (symbol-value reftex-docstruct-symbol)))
- entry)
+ (let* ((rest (symbol-value reftex-docstruct-symbol))
+ lastentry entry)
(while (setq entry (pop rest))
(if (or (and typekey
(stringp (car entry))
(and index (eq (car entry) 'index))
(and file
(memq (car entry) '(bof eof file-error))))
- (throw 'exit entry)))
+ (setq lastentry entry))
+ (if (eq entry here-am-I)
+ (throw 'exit (or lastentry entry))))
nil))))
(defun reftex-insert-docstruct
'font-lock-constant-face
'font-lock-reference-face))
all cell text label typekey note comment master-dir-re
- offset from to index-tag docstruct-symbol)
+ prev-inserted offset from to index-tag docstruct-symbol)
;; Pop to buffer buf to get the correct buffer-local variables
(save-excursion
(incf index)
(setq from (point))
- (if (eq cell here-I-am) (setq offset 'attention))
-
(cond
((memq (car cell) '(bib thebib label-numbers appendix
((memq (car cell) '(bof eof file-error))
;; Beginning or end of a file
(when files
- (if (eq offset 'attention) (setq offset cell))
+ (setq prev-inserted cell)
+; (if (eq offset 'attention) (setq offset cell))
(insert
" File " (if (string-match master-dir-re (nth 1 cell))
(substring (nth 1 cell) (match-end 0))
;; a table of contents entry
(when (and toc
(<= (nth 5 cell) reftex-toc-max-level))
- (if (eq offset 'attention) (setq offset cell))
+ (setq prev-inserted cell)
+; (if (eq offset 'attention) (setq offset cell))
(setq reftex-active-toc cell)
(insert (concat toc-indent (nth 2 cell) "\n"))
(setq to (point))
;; Yes we want this one
(incf cnt)
- (if (eq offset 'attention) (setq offset cell))
+ (setq prev-inserted cell)
+; (if (eq offset 'attention) (setq offset cell))
(setq label (concat xr-prefix label))
(when comment (setq label (concat "% " label)))
(when (and index-entries
(or (eq t index-entries)
(string= index-entries (nth 1 cell))))
- (if (eq offset 'attention) (setq offset cell))
+ (setq prev-inserted cell)
+; (if (eq offset 'attention) (setq offset cell))
(setq index-tag (format "<%s>" (nth 1 cell)))
(and font
(put-text-property 0 (length index-tag)
(when mouse-face
(put-text-property from (1- to)
'mouse-face mouse-face))
- (goto-char to)))))
+ (goto-char to))))
+
+ (if (eq cell here-I-am)
+ (setq offset 'attention))
+ (if (and prev-inserted (eq offset 'attention))
+ (setq offset prev-inserted))
+ )
(when (reftex-refontify)
;; we need to fontify the buffer
q / k Hide/Kill *toc* buffer, return to position of reftex-toc command.
l i c F Toggle display of [l]abels, [i]ndex, [c]ontext, [F]ile borders.
t Change maximum toc depth (e.g. `3 t' hides levels greater than 3).
-f / g Toggle follow mode on and off / Refresh *toc* buffer.
+f / a / g Toggle follow mode / toggle auto recenter / Refresh *toc* buffer.
r / C-u r Reparse the LaTeX document / Reparse entire LaTeX document.
. In other window, show position from where `reftex-toc' was called.
x Switch to TOC of external document (with LaTeX package `xr').
(docstruct-symbol reftex-docstruct-symbol)
(xr-data (assq 'xr (symbol-value reftex-docstruct-symbol)))
(xr-alist (cons (cons "" (buffer-file-name)) (nth 1 xr-data)))
- (here-I-am (if rebuild
+ (here-I-am (if (boundp 'reftex-rebuilding-toc)
(get 'reftex-toc :reftex-data)
(car (reftex-where-am-I))))
offset)
(reftex-find-start-point (point) offset (get 'reftex-toc :reftex-line))
(setq reftex-last-follow-point (point))))
+(defun reftex-toc-recenter (&optional arg)
+ "Display the TOC window and highlight line corresponding to current position."
+ (interactive "P")
+ (let ((buf (current-buffer)))
+ (reftex-toc arg)
+ (if (= (count-lines 1 (point)) 2)
+ (let ((current-prefix-arg nil))
+ (select-window (get-buffer-window buf))
+ (reftex-toc nil)))
+ (and (> (point) 1)
+ (not (get-text-property (point) 'intangible))
+ (memq reftex-highlight-selection '(cursor both))
+ (reftex-highlight 2
+ (or (previous-single-property-change
+ (min (point-max) (1+ (point))) :data)
+ (point-min))
+ (or (next-single-property-change (point) :data)
+ (point-max))))
+ (select-window (get-buffer-window buf))))
+
(defun reftex-toc-pre-command-hook ()
;; used as pre command hook in *toc* buffer
(reftex-unhighlight 0)
- (reftex-unhighlight 1))
+;; (reftex-unhighlight 1) ;; remove highlight on leaving buffer.
+ )
(defun reftex-toc-post-command-hook ()
;; used in the post-command-hook for the *toc* buffer
(and (> (point) 1)
(not (get-text-property (point) 'intangible))
(memq reftex-highlight-selection '(cursor both))
- (reftex-highlight 1
+ (reftex-highlight 2
(or (previous-single-property-change (1+ (point)) :data)
(point-min))
(or (next-single-property-change (point) :data)
(switch-to-buffer-other-window
(reftex-get-file-buffer-force file))
(setq current-prefix-arg '(4))
- (reftex-toc t)))
+ (let ((reftex-rebuilding-toc t))
+ (reftex-toc))))
(reftex-toc-Rescan))
(reftex-kill-temporary-buffers))
(defun reftex-toc-Rescan (&rest ignore)
"Regenerate the *toc* buffer by reparsing the entire document."
(interactive)
+ (let* ((line (+ (count-lines (point-min) (point)) (if (bolp) 1 0))))
+ (put 'reftex-toc :reftex-line line))
(switch-to-buffer-other-window
(reftex-get-file-buffer-force reftex-last-toc-file))
(setq current-prefix-arg '(16))
- (reftex-toc t))
+ (let ((reftex-rebuilding-toc t))
+ (reftex-toc)))
(defun reftex-toc-revert (&rest ignore)
"Regenerate the *toc* from the internal lists."
(interactive)
(reftex-get-file-buffer-force reftex-last-toc-file))
(reftex-erase-buffer "*toc*")
(setq current-prefix-arg nil)
- (reftex-toc t))
+ (let ((reftex-rebuilding-toc t))
+ (reftex-toc t)))
(defun reftex-toc-external (&rest ignore)
"Switch to table of contents of an external document."
(interactive)
(setq old (substring old (match-end 0))))
new))
+
+(defun reftex-recenter-toc-when-idle ()
+ (and (> (buffer-size) 5)
+ reftex-mode
+ (not (active-minibuffer-window))
+ (fboundp 'reftex-toc-mode)
+ (get-buffer-window "*toc*")
+ (string= reftex-last-toc-master (reftex-TeX-master-file))
+ (reftex-toc-recenter)))
+
+(defun reftex-toggle-auto-toc-recenter ()
+ "Toggle the automatic recentering of the toc window.
+When active, leaving point idle will make the toc window jump to the correct
+section."
+ (interactive)
+ (if reftex-toc-auto-recenter-timer
+ (progn
+ (if (featurep 'xemacs)
+ (delete-itimer reftex-toc-auto-recenter-timer)
+ (cancel-timer reftex-toc-auto-recenter-timer))
+ (setq reftex-toc-auto-recenter-timer nil)
+ (message "Automatic recentering of toc buffer was turned off"))
+ (setq reftex-toc-auto-recenter-timer
+ (if (featurep 'xemacs)
+ (start-itimer "RefTeX Idle Timer for recenter"
+ 'reftex-recenter-toc-when-idle
+ reftex-idle-time reftex-idle-time t)
+ (run-with-idle-timer
+ reftex-idle-time t 'reftex-recenter-toc-when-idle)))
+ (message "Automatic recentering of toc window was turned on")))
+
+
;; Table of Contents map
(define-key reftex-toc-map (if (featurep 'xemacs) [(button2)] [(mouse-2)])
'reftex-toc-mouse-goto-line-and-hide)
("q" . reftex-toc-quit)
("k" . reftex-toc-quit-and-kill)
("f" . reftex-toc-toggle-follow)
+ ("a" . reftex-toggle-auto-toc-recenter)
("F" . reftex-toc-toggle-file-boundary)
("i" . reftex-toc-toggle-index)
("l" . reftex-toc-toggle-labels)
:group 'reftex-table-of-contents-browser
:type 'integer)
+(defcustom reftex-part-resets-chapter nil
+ "*Non-nil means, \\part is like any other sectioning command.
+This means, part numbers will be included in the numbering of chapters, and
+chapter counters will be reset for each part.
+When nil (the default), parts are special, do not reset the chapter counter
+and also do not show up in chapter numbers."
+ :group 'reftex-table-of-contents-browser
+ :type 'boolean)
+
+
+(defcustom reftex-auto-recenter-toc nil
+ "*Non-nil means, initially turn automatic recentering of toc on.
+When active, the *TOC* buffer will always show the section you
+are currently working in. Recentering happens whenever Emacs is idle for
+more than `reftex-idle-time' seconds.
+This feature can be turned on and off from the menu
+(Ref->Options)."
+ :group 'reftex-table-of-contents-browser
+ :type 'boolean)
+
(defcustom reftex-toc-split-windows-horizontally nil
"*Non-nil means, create TOC window by splitting window horizontally."
:group 'reftex-table-of-contents-browser
(defcustom reftex-auto-view-crossref t
"*Non-nil means, initially turn automatic viewing of crossref info on.
Automatic viewing of crossref info normally uses the echo area.
-Whenever point is on the argument of a \\ref or \\cite macro, and no
-other message is being displayed, the echo area will display
-information about that cross reference. You can also set the variable
-to the symbol `window'. In this case a small temporary window is
-used for the display.
-This feature can be turned on and of from the menu
+Whenever point is idle for more than `reftex-idle-time' seconds on the
+argument of a \\ref or \\cite macro, and no other message is being
+displayed, the echo area will display information about that cross
+reference. You can also set the variable to the symbol `window'. In
+this case a small temporary window is used for the display.
+This feature can be turned on and off from the menu
(Ref->Options)."
:group 'reftex-viewing-cross-references
:type '(choice (const :tag "off" nil)
(const :tag "in Other Window" window)))
(defcustom reftex-idle-time 1.2
- "*Time (secs) Emacs has to be idle before automatic crossref display is done."
+ "*Time (secs) Emacs has to be idle before automatic crossref display is done.
+Applies also to toc recentering."
:group 'reftex-viewing-cross-references
:type 'number)
(modify-syntax-entry ?\[ "." reftex-syntax-table-for-bib)
(modify-syntax-entry ?\] "." reftex-syntax-table-for-bib))
+;; The following definitions are out of place, but I need them here
+;; to make the compilation of reftex-mode not complain.
(defvar reftex-auto-view-crossref-timer nil
"The timer used for auto-view-crossref.")
+(defvar reftex-toc-auto-recenter-timer nil
+ "The idle timer used to recenter the toc window.")
;;;###autoload
(defun turn-on-reftex ()
(and reftex-auto-view-crossref
(reftex-toggle-auto-view-crossref))
(put 'reftex-auto-view-crossref 'initialized t))
+ (unless (get 'reftex-auto-recenter-toc 'initialized)
+ (and reftex-auto-recenter-toc
+ (reftex-toggle-auto-toc-recenter))
+ (put 'reftex-auto-recenter-toc 'initialized t))
;; Prepare the special syntax tables.
(setq reftex-syntax-table (copy-syntax-table (syntax-table)))
(defvar reftex-callback-fwd t)
(defvar reftex-last-toc-master nil
"Stores the name of the tex file that `reftex-toc' was last run on.")
-(defvar reftex-auto-view-crossref-timer nil
- "The timer used for auto-view-crossref.")
;; Marker for return point from recursive edit
(defvar reftex-recursive-edit-marker (make-marker))
"Make a fancyref \\Fref reference." t)
(autoload 'reftex-show-label-location "reftex-ref")
(autoload 'reftex-query-label-type "reftex-ref")
-
+(autoload 'reftex-goto-label "reftex-ref"
+ "Prompt for label name and go to that location." t)
;;; =========================================================================
;;;
;;; Table of contents
(autoload 'reftex-toc "reftex-toc"
- "Show the table of contents for the current document." t)
+ "Show the table of contents for the current document." t)
+(autoload 'reftex-toc-recenter "reftex-toc"
+ "Display the TOC window and highlight line corresponding to current position." t)
+(autoload 'reftex-toggle-auto-toc-recenter "reftex-toc" t)
;;; =========================================================================
(if (featurep 'xemacs) (require 'overlay))
;; We keep a vector with several different overlays to do our highlighting.
-(defvar reftex-highlight-overlays [nil nil])
+(defvar reftex-highlight-overlays [nil nil nil])
;; Initialize the overlays
(aset reftex-highlight-overlays 0 (make-overlay 1 1))
(aset reftex-highlight-overlays 1 (make-overlay 1 1))
(overlay-put (aref reftex-highlight-overlays 1)
'face reftex-cursor-selected-face)
+(aset reftex-highlight-overlays 2 (make-overlay 1 1))
+(overlay-put (aref reftex-highlight-overlays 2)
+ 'face reftex-cursor-selected-face)
;; Two functions for activating and deactivation highlight overlays
(defun reftex-highlight (index begin end &optional buffer)
;; The default bindings in the mode map.
(loop for x in
'(("\C-c=" . reftex-toc)
+ ("\C-c-" . reftex-toc-recenter)
("\C-c(" . reftex-label)
("\C-c)" . reftex-reference)
("\C-c[" . reftex-citation)
"Menu used in RefTeX mode"
`("Ref"
["Table of Contents" reftex-toc t]
+ ["Recenter TOC" reftex-toc-recenter t]
"--"
["\\label" reftex-label t]
["\\ref" reftex-reference t]
["Entire Document" reftex-parse-all t]
["Save to File" (reftex-access-parse-file 'write)
(> (length (symbol-value reftex-docstruct-symbol)) 0)]
- ["Restore from File" (reftex-access-parse-file 'restore) t]
- "--"
- ["Reset RefTeX Mode" reftex-reset-mode t])
+ ["Restore from File" (reftex-access-parse-file 'restore) t])
("Global Actions"
["Search Whole Document" reftex-search-document t]
["Replace in Document" reftex-query-replace-document t]
["Grep on Document" reftex-grep-document t]
"--"
+ ["Goto Label" reftex-goto-label t]
["Find Duplicate Labels" reftex-find-duplicate-labels t]
["Change Label and Refs" reftex-change-label t]
["Renumber Simple Labels" reftex-renumber-simple-labels t]
(setq reftex-save-parse-info (not reftex-save-parse-info))
:style toggle :selected reftex-save-parse-info]
"--"
+ "TOC RECENTER"
+ ["Automatic Recenter" reftex-toggle-auto-toc-recenter
+ :style toggle :selected reftex-toc-auto-recenter-timer]
+ "--"
"CROSSREF INFO"
["Automatic Info" reftex-toggle-auto-view-crossref
:style toggle :selected reftex-auto-view-crossref-timer]
(list 'get 'reftex-docstruct-symbol
(list 'quote 'reftex-index-macros-style)))))
reftex-index-macros-builtin))
+ "--"
+ ["Reset RefTeX Mode" reftex-reset-mode t]
"--"
("Customize"
["Browse RefTeX Group" reftex-customize t]
@synindex ky cp
@syncodeindex vr cp
@syncodeindex fn cp
-@set VERSION 4.18
-@set EDITION 4.18
-@set DATE July 2002
+@set VERSION 4.19
+@set EDITION 4.19
+@set DATE August 2002
@c %**end of header
@finalout
additional customizations will be necessary.@refill
@item
-@b{Useful Settings}@* To make @b{Ref@TeX{}} faster for large documents,
-try these:@refill
-@lisp
-(setq reftex-enable-partial-scans t)
-(setq reftex-save-parse-info t)
-(setq reftex-use-multiple-selection-buffers t)
-@end lisp
-
-To integrate with AUCTeX, use
+@b{Useful Settings}@*
+To integrate RefTeX with AUCTeX, use
@lisp
(setq reftex-plug-into-AUCTeX t)
@end lisp
Show calling point in another window. This is the point from where
@code{reftex-toc} was last called.
+@page
@tablesubheading{Exiting}
@item q
Hide the @file{*toc*} buffer, return to the position where
package)}), @b{Ref@TeX{}} will switch to one of the external
documents.@refill
+@item a
+Toggle the automatic recentering of the @file{*toc*} buffer. When this
+option is on, moving around in the document will cause the @file{*toc*}
+to always highlight the current section. This can be enabled by default
+with the variable @code{reftex-auto-recenter-toc}.
+
@end table
@vindex reftex-toc-map
In order to define additional commands for the @file{*toc*} buffer, the
keymap @code{reftex-toc-map} may be used.@refill
+@findex reftex-toc-recenter
+@vindex reftex-auto-recenter-toc
+@vindex reftex-idle-time
+@cindex @file{*toc*} buffer, recentering
+@cindex Table of contents buffer, recentering
+@kindex C-c -
+If you call @code{reftex-toc} while the @file{*toc*} buffer already
+exists, the cursor will immediately jump to the right place, i.e. the
+section from which @code{reftex-toc} was called will be highlighted.
+The command @kbd{C-c -} (@code{reftex-toc-recenter}) will only redisplay
+the @file{*toc*} buffer and highlight the correct line without actually
+selecting the @file{*toc*} window. This can be useful to quickly find
+out where in the document you currently are. If you want the TOC buffer
+to show the current section automatically whenever you stop typing, try
+@lisp
+(setq reftex-auto-recenter-toc t)
+@end lisp
+When this is turned on, the toc buffer will be recentered whenever Emacs
+is idle for more than @code{reftex-idle-time} seconds.
+
+
@cindex Sectioning commands
@cindex KOMA-Script, LaTeX classes
@cindex LaTeX classes, KOMA-Script
@kindex C-c &
@kindex S-mouse-2
-When point is idle on the argument of a @code{\ref} macro, the echo area
-will display some information about the label referenced there. Note
-that the information is only displayed if the echo area is not occupied
-by a different message.
+When point is idle for more than @code{reftex-idle-time} seconds on the
+argument of a @code{\ref} macro, the echo area will display some
+information about the label referenced there. Note that the information
+is only displayed if the echo area is not occupied by a different
+message.
@b{Ref@TeX{}} can also display the label definition corresponding to a
@code{\ref} macro, or all reference locations corresponding to a
@findex reftex-view-crossref
@findex reftex-mouse-view-crossref
-When point is idle on the argument of a @code{\cite} macro, the echo area
-will display some information about the article cited there. Note
-that the information is only displayed if the echo area is not occupied
-by a different message.
+When point is idle for more than @code{reftex-idle-time} seconds on the
+argument of a @code{\cite} macro, the echo area will display some
+information about the article cited there. Note that the information is
+only displayed if the echo area is not occupied by a different message.
@b{Ref@TeX{}} can also display the @code{\bibitem} or BibTeX database
entry corresponding to a @code{\cite} macro, or all citation locations
Here is a summary of the available key bindings.
@kindex C-c =
+@kindex C-c -
@kindex C-c (
@kindex C-c )
@kindex C-c [
@kindex C-c >
@example
@kbd{C-c =} @code{reftex-toc}
+@kbd{C-c -} @code{reftex-toc-recenter}
@kbd{C-c (} @code{reftex-label}
@kbd{C-c )} @code{reftex-reference}
@kbd{C-c [} @code{reftex-citation}
@section Optimizations
@cindex Optimizations
+@b{Note added 2002. Computers have gotten a lot faster, so most of the
+optimizations discussed below will not be necessary on new machines. I
+am leaving this stuff in the manual for people who want to write thick
+books, where some of it still might be useful.}
+
Implementing the principle of least surprises, the default settings of
@b{Ref@TeX{}} ensure a safe ride for beginners and casual users. However,
when using @b{Ref@TeX{}} for a large project and/or on a small computer,
developing it with their reports. In particular thanks to @i{Fran
Burstall, Alastair Burt, Lars Clausen, Soren Dayton, Stephen Eglen, Karl
Eichwalder, Erik Frik, Erik Frisk, Peter Galbraith, Kai Grossjohann,
-Frank Harrell, Stephan Heuel, Alan Ho, Dieter Kraft, Adrian Lanz, Rory
-Molinari, Stefan Monnier, Laurent Mugnier, Sudeep Kumar Palat, Daniel
-Polani, Alan Shutko, Robin Socha, Richard Stanton, Allan Strand, Jan
-Vroonhof, Christoph Wedler, Alan Williams, Roland Winkler, Eli
-Zaretskii}.@refill
+Frank Harrell, Stephan Heuel, Alan Ho, Lute Kamstra, Dieter Kraft,
+Adrian Lanz, Rory Molinari, Stefan Monnier, Laurent Mugnier, Sudeep
+Kumar Palat, Daniel Polani, Alan Shutko, Robin Socha, Richard Stanton,
+Allan Strand, Jan Vroonhof, Christoph Wedler, Alan Williams, Roland
+Winkler, Eli Zaretskii}.@refill
The @code{view-crossref} feature was inspired by @i{Peter Galbraith's}
@file{bib-cite.el}.@refill
active TAGS table is required.@refill
@end deffn
+@deffn Command reftex-goto-label
+Prompt for a label (with completion) and jump to the location of this
+label. Optional prefix argument @var{other-window} goes to the label in
+another window.
+@end deffn
+
+
@deffn Command reftex-change-label
Query replace @var{from} with @var{to} in all @code{\label} and
@code{\ref} commands. Works on the entire multifile document. No
changed from within the @file{*toc*} buffer with the @kbd{t} key.@refill
@end defopt
+@defopt reftex-part-resets-chapter
+Non-@code{nil} means, @code{\part} is like any other sectioning command.
+This means, part numbers will be included in the numbering of chapters, and
+chapter counters will be reset for each part.
+When @code{nil} (the default), parts are special, do not reset the
+chapter counter and also do not show up in chapter numbers.
+@end defopt
+
+@defopt reftex-auto-recenter-toc
+Non-@code{nil} means, initially turn automatic recentering of toc on.
+When active, the @file{*TOC*} buffer will always show the section you
+are currently working in. Recentering happens whenever Emacs is idle
+for more than `reftex-idle-time' seconds.
+This feature can be turned on and off from the menu
+(Ref->Options).
+@end defopt
+
@defopt reftex-toc-split-windows-horizontally
Non-@code{nil} means, create TOC window by splitting window
horizontally. The default is to split vertically.
@defopt reftex-auto-view-crossref
Non-@code{nil} means, initially turn automatic viewing of crossref info
on. Automatic viewing of crossref info normally uses the echo area.
-Whenever point is on the argument of a @code{\ref} or @code{\cite}
-macro, and no other message is being displayed, the echo area will
-display information about that cross reference. You can also set the
-variable to the symbol @code{window}. In this case a small temporary
-window is used for the display. This feature can be turned on and of
-from the menu (Ref->Options).@refill
+Whenever point is idle for more than @code{reftex-idle-time} seconds on
+the argument of a @code{\ref} or @code{\cite} macro, and no other
+message is being displayed, the echo area will display information about
+that cross reference. You can also set the variable to the symbol
+@code{window}. In this case a small temporary window is used for the
+display. This feature can be turned on and off from the menu
+(Ref->Options).@refill
@end defopt
@defopt reftex-idle-time
-Time (secs) Emacs has to be idle before automatic crossref display is
-done.@refill
+Time (secs) Emacs has to be idle before automatic crossref display
+or toc recentering is done.@refill
@end defopt
@defopt reftex-cite-view-format
@item
Reading a parse file now checks consistency.
@end itemize
-@end ignore
@noindent @b{Version 4.00}
@itemize @bullet
@item
@item
Improved interaction with Emacs LaTeX mode.
@end itemize
+@end ignore
@noindent @b{Version 4.17}
@itemize @bullet
@item
@item
@code{reftex-citation} uses the word before the cursor as a default
search string.
+@item
+Simplified several regular expressions for speed.
+@item
+Better support for chapterbib.
+@end itemize
+@noindent @b{Version 4.19}
+@itemize @bullet
+@item
+New command `reftex-toc-recenter' (@kbd{C-c -}) which shows the current
+section in the TOC buffer without selecting the TOC window.
+@item
+Recentering happens automatically in idle time when the option
+@code{reftex-auto-recenter-toc} is turned on.
+@item
+Fixed several bugs related to automatic cursor positioning in the TOC
+buffer.
+@item
+The highlight in the TOC buffer stays when the focus moves to a
+different window.
+@item
+New command `reftex-goto-label'.
+@item
+Part numbers are no longer included in chapter numbers, and a new
+part does not reset the chapter counter. See new option
+@code{reftex-part-resets-chapter}.
@end itemize
@node Index, , , Top
HCoop / bpt / emacs.git / commitdiff