Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992-2012 Free Software Foundation, Inc.
   6
   7 # This file is part of GNU Emacs.
   8
   9 # GNU Emacs is free software: you can redistribute it and/or modify
  10 # it under the terms of the GNU General Public License as published by
  11 # the Free Software Foundation, either version 3 of the License, or
  12 # (at your option) any later version.
  13
  14 # GNU Emacs is distributed in the hope that it will be useful,
  15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 # GNU General Public License for more details.
  18
  19 # You should have received a copy of the GNU General Public License
  20 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  21
  22 ### Commentary:
  23
  24 # make all      to compile and build Emacs.
  25 # make install  to install it.
  26 # make TAGS     to update tags tables.
  27 #
  28 # make clean  or  make mostlyclean
  29 #      Delete all files from the current directory that are normally
  30 #      created by building the program.  Don't delete the files that
  31 #      record the configuration.  Also preserve files that could be made
  32 #      by building, but normally aren't because the distribution comes
  33 #      with them.
  34 #
  35 #      Delete `.dvi' files here if they are not part of the distribution.
  36 #
  37 # make distclean
  38 #      Delete all files from the current directory that are created by
  39 #      configuring or building the program.  If you have unpacked the
  40 #      source and built the program without creating any other files,
  41 #      `make distclean' should leave only the files that were in the
  42 #      distribution.
  43 #
  44 # make maintainer-clean
  45 #      Delete everything from the current directory that can be
  46 #      reconstructed with this Makefile.  This typically includes
  47 #      everything deleted by distclean, plus more: .elc files,
  48 #      C source files produced by Bison, tags tables, info files,
  49 #      and so on.
  50 #
  51 # make extraclean
  52 #      Still more severe - delete backup and autosave files, too.
  53 #
  54 # make bootstrap
  55 #      Removes all the compiled files to force a new bootstrap from a
  56 #      clean slate, and then build in the normal way.
  57
  58 SHELL = /bin/sh
  59
  60 # This may not work with certain non-GNU make's.  It only matters when
  61 # inheriting a CDPATH not starting with the current directory.
  62 CDPATH=
  63
  64 # If Make doesn't predefine MAKE, set it here.
  65 @SET_MAKE@
  66
  67 # ==================== Things `configure' Might Edit ====================
  68
  69 MAINTAINER_MODE_FLAG = --disable-maintainer-mode
  70 @MAINT@MAINTAINER_MODE_FLAG = --enable-maintainer-mode
  71 cache_file = @cache_file@
  72 CONFIGURE_FLAGS = --cache-file=$(cache_file) $(MAINTAINER_MODE_FLAG)
  73
  74 CC=@CC@
  75 CFLAGS=@CFLAGS@
  76 LDFLAGS=@LDFLAGS@
  77 CPPFLAGS=@CPPFLAGS@
  78 EXEEXT=@EXEEXT@
  79
  80 ### These help us choose version- and architecture-specific directories
  81 ### to install files in.
  82
  83 ### This should be the number of the Emacs version we're building,
  84 ### like `18.59' or `19.0'.
  85 version=@version@
  86
  87 ### This should be the name of the configuration we're building Emacs
  88 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  89 configuration=@configuration@
  90
  91 # ==================== Where To Install Things ====================
  92
  93 # The default location for installation.  Everything is placed in
  94 # subdirectories of this directory.  The default values for many of
  95 # the variables below are expressed in terms of this one, so you may
  96 # not need to change them.  This defaults to /usr/local.
  97 prefix=@prefix@
  98
  99 # Like `prefix', but used for architecture-specific files.
 100 exec_prefix=@exec_prefix@
 101
 102 # Where to install Emacs and other binaries that people will want to
 103 # run directly (like etags).
 104 bindir=@bindir@
 105
 106 # The root of the directory tree for read-only architecture-independent
 107 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 108 datarootdir=@datarootdir@
 109
 110 # Where to install architecture-independent data files.  ${lispdir}
 111 # and ${etcdir} are subdirectories of this.
 112 datadir=@datadir@
 113
 114 # Where to install and expect the files that Emacs modifies as it
 115 # runs.  These files are all architecture-independent.
 116 # Right now, this is not used.
 117 sharedstatedir=@sharedstatedir@
 118
 119 # Where to install and expect executable files to be run by Emacs
 120 # rather than directly by users, and other architecture-dependent
 121 # data.  ${archlibdir} is a subdirectory of this.
 122 libexecdir=@libexecdir@
 123
 124 # Where to install Emacs's man pages.
 125 # Note they contain cross-references that expect them to be in section 1.
 126 mandir=@mandir@
 127 man1dir=$(mandir)/man1
 128
 129 # Where to install and expect the info files describing Emacs.
 130 infodir=@infodir@
 131 # Info files not in the doc/misc directory (we get those via make echo-info).
 132 INFO_EXT=@INFO_EXT@
 133 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
 134
 135 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 136 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 137
 138 # Directory for local state files for all programs.
 139 localstatedir=@localstatedir@
 140
 141 # Where to look for bitmap files.
 142 bitmapdir=@bitmapdir@
 143
 144 # Where to find the source code.  The source code for Emacs's C kernel is
 145 # expected to be in ${srcdir}/src, and the source code for Emacs's
 146 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 147 # set by the configure script's `--srcdir' option.
 148
 149 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 150 srcdir=@srcdir@
 151
 152 # Where the manpage source files are kept.
 153 mansrcdir=$(srcdir)/doc/man
 154
 155 # Tell make where to find source files; this is needed for the makefiles.
 156 VPATH=@srcdir@
 157
 158 # Where to find the application default.
 159 x_default_search_path=@x_default_search_path@
 160
 161 # Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
 162 ns_appbindir=@ns_appbindir@
 163 ns_appresdir=@ns_appresdir@
 164
 165 # Where the etc/emacs.desktop file is to be installed.
 166 desktopdir=$(datarootdir)/applications
 167
 168 # Where the etc/images/icons/hicolor directory is to be installed.
 169 icondir=$(datarootdir)/icons
 170
 171 # The source directory for the icon files.
 172 iconsrcdir=$(srcdir)/etc/images/icons
 173
 174 # ==================== Emacs-specific directories ====================
 175
 176 # These variables hold the values Emacs will actually use.  They are
 177 # based on the values of the standard Make variables above.
 178
 179 # Where to install the lisp files distributed with
 180 # Emacs.  This includes the Emacs version, so that the
 181 # lisp files for different versions of Emacs will install
 182 # themselves in separate directories.
 183 lispdir=@lispdir@
 184
 185 # Directories Emacs should search for lisp files specific
 186 # to this site (i.e. customizations), before consulting
 187 # ${lispdir}.  This should be a colon-separated list of
 188 # directories.
 189 locallisppath=@locallisppath@
 190
 191 # Where Emacs will search to find its lisp files.  Before
 192 # changing this, check to see if your purpose wouldn't
 193 # better be served by changing locallisppath.  This
 194 # should be a colon-separated list of directories.
 195 lisppath=@lisppath@
 196
 197 # Where Emacs will search for its lisp files while
 198 # building.  This is only used during the process of
 199 # compiling Emacs, to help Emacs find its lisp files
 200 # before they've been installed in their final location.
 201 # This should be a colon-separated list of directories.
 202 # Normally it points to the lisp/ directory in the sources.
 203 buildlisppath=${srcdir}/lisp
 204
 205 # Where to install the other architecture-independent
 206 # data files distributed with Emacs (like the tutorial,
 207 # the cookie recipes and the Zippy database). This path
 208 # usually contains the Emacs version number, so the data
 209 # files for multiple versions of Emacs may be installed
 210 # at once.
 211 etcdir=@etcdir@
 212
 213 # Where to put executables to be run by Emacs rather than
 214 # the user.  This path usually includes the Emacs version
 215 # and configuration name, so that multiple configurations
 216 # for multiple versions of Emacs may be installed at
 217 # once.
 218 archlibdir=@archlibdir@
 219
 220 # Where to put the docstring file.
 221 docdir=@docdir@
 222
 223 # Where to install Emacs game score files.
 224 gamedir=@gamedir@
 225
 226 # ==================== Utility Programs for the Build ====================
 227
 228 # Allow the user to specify the install program.
 229 # Note that if the system does not provide a suitable install,
 230 # configure will use build-aux/install-sh.  Annoyingly, it does
 231 # not use an absolute path.  So we must take care to always run
 232 # INSTALL-type commands from the top-level directory.
 233 # This explains (I think) the cd thisdir seen in several install rules.
 234 INSTALL = @INSTALL@
 235 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 236 INSTALL_DATA = @INSTALL_DATA@
 237 INSTALL_INFO = @INSTALL_INFO@
 238 # By default, we uphold the dignity of our programs.
 239 INSTALL_STRIP =
 240
 241 # We use gzip to compress installed .el files.
 242 GZIP_PROG = @GZIP_PROG@
 243 # If non-nil, gzip the installed Info and man pages.
 244 GZIP_INFO = @GZIP_INFO@
 245
 246 # ============================= Targets ==============================
 247
 248 # Program name transformation.
 249 TRANSFORM = @program_transform_name@
 250
 251 # What emacs should be called when installed.
 252 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 253 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 254
 255 # Subdirectories to make recursively.  `lisp' is not included
 256 # because the compiled lisp files are part of the distribution.
 257 # leim is not included because it needs special handling.
 258 #
 259 # Actually, we now include `lisp' as well, since the compiled files
 260 # are not included any more in case of bootstrap or in case Emacs was
 261 # checked out from a VCS.
 262 SUBDIR = lib lib-src src lisp
 263
 264 # The subdir makefiles created by config.status.
 265 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 266 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 267
 268 # Subdirectories to install, and where they'll go.
 269 # lib-src's makefile knows how to install it, so we don't do that here.
 270 # leim's makefile also knows how to install it, so we don't do that here.
 271 # When installing the info files, we need to do special things to
 272 # avoid nuking an existing dir file, so we don't do that here;
 273 # instead, we have written out explicit code in the `install' targets.
 274 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 275 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 276
 277 all: ${SUBDIR} leim
 278
 279 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 280
 281 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 282 # See comments in configure.in for why it is done this way, as opposed
 283 # to just letting configure generate epaths.h from epaths.in in a
 284 # similar way to how Makefile is made from Makefile.in.
 285 epaths-force: FRC
 286         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 287           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 288           x_default_search_path=`echo ${x_default_search_path}`; \
 289           gamedir=`echo ${gamedir}`; \
 290           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 291           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 292           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 293           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 294           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 295           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 296           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 297           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 298           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 299           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') &&                \
 300         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 301
 302 # For parallel make, src should be built before leim.
 303 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 304 # running more than 1 process in the leim directory, especially for
 305 # the $TIT files there.
 306 leim:   src Makefile FRC
 307         cd leim && PARALLEL=0 $(MAKE) all $(MFLAGS)
 308
 309 lib-src src: lib
 310
 311 src:    lib-src FRC
 312
 313 .RECURSIVE: ${SUBDIR} leim
 314
 315 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
 316 lisp: src
 317
 318 # Maintainers can put a copy of gnulib into $(gnulib_srcdir).
 319 gnulib_srcdir = ../gnulib
 320 $(gnulib_srcdir):
 321         git clone git://git.savannah.gnu.org/gnulib.git $@
 322
 323 # A shorter name that satisfies MS-DOS 8+3 constraints.
 324 DOS_gnulib_comp.m4 = gl-comp.m4
 325
 326 # Update modules from gnulib, for maintainers, who should have it in
 327 # $(gnulib_srcdir) (relative to $(srcdir) and should have build tools
 328 # as per $(gnulib_srcdir)/DEPENDENCIES.
 329 GNULIB_MODULES = \
 330   alloca-opt \
 331   careadlinkat crypto/md5 crypto/sha1 crypto/sha256 crypto/sha512 dtoastr \
 332   dup2 \
 333   filemode getloadavg getopt-gnu ignore-value intprops lstat \
 334   manywarnings mktime pthread_sigmask readlink \
 335   socklen stdarg stdio strftime strtoimax strtoumax symlink sys_stat \
 336   warnings
 337 GNULIB_TOOL_FLAGS = \
 338  --avoid=msvc-inval --avoid=msvc-nothrow \
 339  --avoid=raise --avoid=threadlib \
 340  --conditional-dependencies --import --no-changelog --no-vc-files \
 341  --makefile-name=gnulib.mk
 342 sync-from-gnulib: $(gnulib_srcdir)
 343         -cd $(srcdir)/m4 && cp $(DOS_gnulib_comp.m4) gnulib-comp.m4
 344         cd $(srcdir) && \
 345           $(gnulib_srcdir)/gnulib-tool $(GNULIB_TOOL_FLAGS) $(GNULIB_MODULES)
 346         cd $(srcdir)/m4 && rm gnulib-cache.m4 warn-on-use.m4
 347         cd $(srcdir)/m4 && mv gnulib-comp.m4 $(DOS_gnulib_comp.m4)
 348         cp $(gnulib_srcdir)/build-aux/texinfo.tex $(srcdir)/doc/misc
 349         cp \
 350           $(gnulib_srcdir)/build-aux/move-if-change \
 351           $(srcdir)/build-aux
 352         cd $(srcdir) && autoreconf -i -I m4
 353 .PHONY: sync-from-gnulib
 354
 355 # These targets should be "${SUBDIR} without `src'".
 356 lib lib-src lisp: Makefile FRC
 357         cd $@; $(MAKE) all $(MFLAGS)                           \
 358           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 359           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 360
 361 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 362 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 363 # constructed yet) or the empty string (otherwise).
 364 # src/Makefile.in uses it to implement conditional dependencies, so that
 365 # files that need bootstrap-emacs to be built do not additionally need
 366 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 367 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 368 # all preloaded elisp files, and only then dump the actual src/emacs, which
 369 # is not wrong, but is overkill in 99.99% of the cases.
 370 src: Makefile FRC
 371         boot=bootstrap-emacs$(EXEEXT);                         \
 372         if [ ! -x "src/$$boot" ]; then                                     \
 373             cd $@; $(MAKE) all $(MFLAGS)                                   \
 374               CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \
 375               LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
 376         fi;
 377         if [ -r .bzr/checkout/dirstate ]; then                  \
 378             vcswitness="`pwd`/.bzr/checkout/dirstate";  \
 379         fi;                                                     \
 380         cd $@; $(MAKE) all $(MFLAGS)                           \
 381           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 382           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
 383           VCSWITNESS="$$vcswitness"
 384
 385 blessmail: Makefile src FRC
 386         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 387           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 388
 389 # We used to have one rule per */Makefile.in, but that leads to race
 390 # conditions with parallel makes, so let's assume that the time stamp on
 391 # ./Makefile is representative of the time stamp on all the other Makefiles.
 392 Makefile: config.status $(srcdir)/src/config.in \
 393           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
 394         ./config.status
 395
 396 # Don't erase config.status if make is interrupted while refreshing it.
 397 .PRECIOUS: config.status
 398
 399 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 400         if [ -x ./config.status ]; then \
 401             ./config.status --recheck;  \
 402         else                            \
 403             ./configure $(CONFIGURE_FLAGS); \
 404         fi
 405
 406 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/aclocal.m4
 407
 408 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 409         cd ${srcdir} && autoconf
 410
 411 ACLOCAL_INPUTS = @MAINT@ $(srcdir)/m4/$(DOS_gnulib_comp.m4)
 412 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 413         cd $(srcdir) && aclocal -I m4
 414
 415 AUTOMAKE_INPUTS = @MAINT@ $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am $(srcdir)/lib/gnulib.mk
 416 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 417         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 418 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 419 .PHONY: am--refresh
 420
 421 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 422         @ # Usually, there's no need to rebuild src/config.in just
 423         @ # because stamp-h.in has changed (since building stamp-h.in
 424         @ # refreshes config.in as well), but if config.in is missing
 425         @ # then we really need to do something more.
 426         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 427 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 428         cd ${srcdir} && autoheader
 429         rm -f $(srcdir)/src/stamp-h.in
 430         echo timestamp > $(srcdir)/src/stamp-h.in
 431
 432 # ==================== Installation ====================
 433
 434 ## If we let lib-src do its own installation, that means we
 435 ## don't have to duplicate the list of utilities to install in
 436 ## this Makefile as well.
 437
 438 ## On AIX, use tar xBf.
 439 ## On Xenix, use tar xpf.
 440
 441 .PHONY: install mkdir
 442
 443 ## We delete each directory in ${COPYDESTS} before we copy into it;
 444 ## that way, we can reinstall over directories that have been put in
 445 ## place with their files read-only (perhaps because they are checked
 446 ## into RCS).  In order to make this safe, we make sure that the
 447 ## source exists and is distinct from the destination.
 448 ### We do install-arch-indep first because
 449 ### the executable needs the Lisp files and DOC file to work properly.
 450 install: all install-arch-indep install-arch-dep install-leim blessmail
 451         @true
 452
 453 MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done
 454
 455 ### Install the executables that were compiled specifically for this machine.
 456 ### It would be nice to do something for a parallel make
 457 ### to ensure that install-arch-indep finishes before this starts.
 458 install-arch-dep: mkdir
 459         (cd lib-src; \
 460           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 461             exec_prefix=${exec_prefix} bindir=${bindir} \
 462             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 463             INSTALL_STRIP=${INSTALL_STRIP})
 464         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 465         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 466         rm -f $(DESTDIR)${bindir}/$(EMACS)
 467         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 468         if test "${ns_appresdir}" != ""; then \
 469           ( cd ${ns_appresdir} ; \
 470             if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\
 471             if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \
 472             rm -fr share ) ; \
 473           ( cd ${ns_appbindir} ; \
 474             if cd libexec ; then dir=emacs/*/*/* ; $(MV_DIRS); \
 475             rm -fr emacs; if cd ../bin; then rm -f emacs emacs-24*; \
 476             ln -sf ../libexec/* . ; fi ; fi ) ; \
 477         else true ; fi
 478
 479 ## FIXME is the emacs-24* bit above really necessary and correct?
 480 ## What if I have 24.1 and 24.2 installed at the same time?
 481 ## In any case, it should use something like echo $version | sed 's/\..*//'
 482 ## instead of hard-coding a version.
 483
 484 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 485 ## Needs to be the user running install, so configure can't set it.
 486 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 487           `id -un 2> /dev/null`; do \
 488           [ -n "$${installuser}" ] && break ; \
 489         done
 490
 491 ### Install the files that are machine-independent.
 492 ### Most of them come straight from the distribution;
 493 ### the exception is the DOC-* files, which are copied
 494 ### from the build directory.
 495
 496 ## Note that we copy DOC* and then delete DOC
 497 ## as a workaround for a bug in tar on Ultrix 4.2.
 498 ## Ultrix is no longer supported since 23.1, but the relevant line
 499 ## has another effect.  We copy the entire etc/ directory from the
 500 ## source tree first.  For an in-tree build, this will include
 501 ## any DOC* files there may be.  So rm DOC does have an effect.
 502 ## FIXME When we copy etc we should exclude DOC*, then copy only
 503 ## the relevant one.  We cannot delete DOC* from the destination directory,
 504 ## because that may include pre-existing files from another emacs.
 505
 506 ## We install only the relevant DOC file if possible
 507 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 508 ## (Note "otherwise" is inaccurate since 2009-08-23.)
 509
 510 ## If people complain about the h flag in tar command, take that out.
 511 ## That flag is also used in leim/Makefile.in
 512
 513 ## Note that the Makefiles in the etc directory are potentially useful
 514 ## in an installed Emacs, so should not be excluded.
 515
 516 install-arch-indep: mkdir info install-etc
 517         -set ${COPYDESTS} ; \
 518         unset CDPATH; \
 519         for dir in ${COPYDIR} ; do \
 520           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 521             rm -rf $$1 ; \
 522           fi ; \
 523           shift ; \
 524         done
 525         -set ${COPYDESTS} ; \
 526         mkdir ${COPYDESTS} ; \
 527         chmod ugo+rx ${COPYDESTS} ; \
 528         unset CDPATH; \
 529         $(set_installuser); \
 530         for dir in ${COPYDIR} ; do \
 531           dest=$$1 ; shift ; \
 532           [ -d $${dir} ] \
 533           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 534           && (echo "Copying $${dir} to $${dest}..." ; \
 535               (cd $${dir}; tar -chf - . ) \
 536                 | (cd $${dest}; umask 022; \
 537                    tar -xvf - && cat > /dev/null) || exit 1; \
 538               find $${dest} -exec chown $${installuser} {} ';' ;\
 539               for subdir in `find $${dest} -type d -print` ; do \
 540                 chmod a+rx $${subdir} ; \
 541                 rm -f  $${subdir}/.gitignore ; \
 542                 rm -f  $${subdir}/.arch-inventory ; \
 543                 rm -f  $${subdir}/.DS_Store ; \
 544                 rm -f  $${subdir}/\#* ; \
 545                 rm -f  $${subdir}/.\#* ; \
 546                 rm -f  $${subdir}/*~ ; \
 547                 rm -f  $${subdir}/*.orig ; \
 548                 [ "$${dir}" != "${srcdir}/etc" ] && \
 549                  rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
 550                 rm -f  $${subdir}/ChangeLog* ; \
 551               done) ; \
 552         done
 553         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 554         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 555         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 556         then true; \
 557         else \
 558           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 559            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 560             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 561         fi
 562         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 563         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 564         then true; \
 565         else \
 566           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 567            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 568             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 569         fi
 570         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 571         -unset CDPATH; \
 572         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 573         then \
 574            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 575            if [ -f "./etc/DOC-$${fullversion}" ]; \
 576            then \
 577              docfile="DOC-$${fullversion}"; \
 578            else \
 579              docfile="DOC"; \
 580            fi; \
 581            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 582            (cd ./etc; tar -chf - $${docfile}) \
 583              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 584            (cd $(DESTDIR)$(docdir); \
 585             $(set_installuser); \
 586             chown $${installuser} DOC*; chmod a+r DOC*; \
 587             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 588         else true; fi
 589         -unset CDPATH; \
 590         if [ -r ./lisp ] \
 591            && [ -r ./lisp/simple.el ] \
 592            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 593            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 594         then \
 595            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 596            (cd lisp; tar -chf - *.el *.elc) \
 597              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 598            (cd $(DESTDIR)${lispdir}; \
 599             $(set_installuser); \
 600             find . -exec chown $${installuser} {} ';') ; \
 601         else true; fi
 602         -unset CDPATH; \
 603         if [ -n "${GZIP_PROG}" ]; \
 604         then \
 605            echo "Compressing *.el ..." ; \
 606            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 607                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 608             done) \
 609         else true; fi
 610         -unset CDPATH; \
 611         thisdir=`/bin/pwd`; \
 612         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 613         then \
 614           (cd $(DESTDIR)${infodir};  \
 615            if [ -f dir ]; then true; \
 616            else \
 617              (cd $${thisdir}; \
 618               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 619               chmod a+r $(DESTDIR)${infodir}/dir); \
 620            fi; \
 621            info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
 622            cd ${srcdir}/info ; \
 623            for elt in ${INFO_NONMISC} $${info_misc}; do \
 624               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 625               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 626                (cd $${thisdir}; \
 627                 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
 628                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 629                 if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 630                   rm -f $(DESTDIR)${infodir}/$$f.gz; \
 631                   ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
 632                 else true; fi; \
 633               done; \
 634              (cd $${thisdir}; \
 635               ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 636            done); \
 637         else true; fi
 638         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 639         thisdir=`/bin/pwd`; \
 640         cd ${mansrcdir}; \
 641         for page in *.1; do \
 642           (cd $${thisdir}; \
 643            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
 644            chmod a+r $(DESTDIR)${man1dir}/$${page}; \
 645            if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 646              rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
 647              ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
 648            else true; fi ); \
 649         done
 650
 651 ## Install those items from etc/ that need to end up elsewhere.
 652 install-etc: mkdir
 653         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 654           $(DESTDIR)${desktopdir}/emacs.desktop
 655         for icon in $(iconsrcdir)/*/*/apps/*.* \
 656           $(iconsrcdir)/*/*/mimetypes/*.*; do \
 657           if [ -r $${icon} ]; then \
 658             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 659             ${INSTALL_DATA} $${icon} $${iicon} ; \
 660           fi ; \
 661         done
 662
 663 ### Install LEIM files.  Although they are machine-independent, we
 664 ### have separate target here instead of including it in
 665 ### `install-arch-indep'.  People who extracted LEIM files after they
 666 ### installed Emacs itself can install only LEIM files by this target.
 667 install-leim: leim/Makefile mkdir
 668         cd leim && $(MAKE) $(MFLAGS) install
 669
 670 ### Build Emacs and install it, stripping binaries while installing them.
 671 install-strip:
 672         $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
 673
 674 ### Build all the directories we're going to install Emacs in.  Since
 675 ### we may be creating several layers of directories (for example,
 676 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use install-sh -d
 677 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 678 ### We set the umask so that any created directories are world-readable.
 679 ### FIXME it would be good to warn about non-standard permissions of
 680 ### pre-existing directories, but that does not seem easy.
 681 mkdir: FRC
 682         icondirs= ; \
 683         for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
 684           if [ -d $${dir} ]; then \
 685             icondirs="$${icondirs} $${dir}" ; \
 686           fi ; \
 687         done ; \
 688         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 689         umask 022 ; \
 690         $(srcdir)/build-aux/install-sh -d $(DESTDIR)${datadir} ${COPYDESTS} \
 691           $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 692           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 693           $(DESTDIR)${datadir}/emacs/site-lisp \
 694           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 695           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 696           $(DESTDIR)${desktopdir} $${icondirs}
 697
 698 ### Delete all the installed files that the `install' target would
 699 ### create (but not the noninstalled files such as `make all' would create).
 700 ###
 701 ### Don't delete the lisp and etc directories if they're in the source tree.
 702 uninstall:
 703         (cd lib-src;                                    \
 704          $(MAKE) $(MFLAGS) uninstall                    \
 705             prefix=${prefix} exec_prefix=${exec_prefix} \
 706             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 707         -unset CDPATH; \
 708         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 709           if [ -d $${dir} ]; then                       \
 710             case `(cd $${dir} ; /bin/pwd)` in           \
 711               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 712               * ) rm -rf $${dir} ;;                     \
 713             esac ;                                      \
 714             case $${dir} in                             \
 715               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 716                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 717               ;;                                        \
 718             esac ;                                      \
 719           fi ;                                          \
 720         done
 721         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 722         thisdir=`/bin/pwd`; \
 723         (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
 724           cd $(DESTDIR)${infodir} && \
 725           for elt in ${INFO_NONMISC} $${info_misc}; do \
 726             (cd $${thisdir}; \
 727              $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 728             if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 729                ext=.gz; else ext=; fi; \
 730             rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
 731           done;)
 732         (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 733             ext=.gz; else ext=; fi; \
 734          cd ${mansrcdir} && for page in *.1; do \
 735            rm -f $(DESTDIR)${man1dir}/$$page$$ext; done )
 736         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 737         (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
 738         -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
 739         for file in snake-scores tetris-scores; do \
 740           file=$(DESTDIR)${gamedir}/$${file}; \
 741           [ -s $${file} ] || rm -f $$file; \
 742         done
 743
 744 FRC:
 745
 746 # ==================== Cleaning up and miscellanea ====================
 747
 748 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 749
 750 ### `mostlyclean'
 751 ###      Like `clean', but may refrain from deleting a few files that people
 752 ###      normally don't want to recompile.  For example, the `mostlyclean'
 753 ###      target for GCC does not delete `libgcc.a', because recompiling it
 754 ###      is rarely necessary and takes a lot of time.
 755 mostlyclean: FRC
 756         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 757         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 758         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 759         (cd lib;      $(MAKE) $(MFLAGS) mostlyclean)
 760         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 761         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 762         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 763         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 764         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 765         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 766
 767 ### `clean'
 768 ###      Delete all files from the current directory that are normally
 769 ###      created by building the program.  Don't delete the files that
 770 ###      record the configuration.  Also preserve files that could be made
 771 ###      by building, but normally aren't because the distribution comes
 772 ###      with them.
 773 ###
 774 ###      Delete `.dvi' files here if they are not part of the distribution.
 775 clean: FRC
 776         (cd src;      $(MAKE) $(MFLAGS) clean)
 777         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 778         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 779         (cd lib;      $(MAKE) $(MFLAGS) clean)
 780         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 781         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 782         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 783         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 784         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 785         (cd leim;     $(MAKE) $(MFLAGS) clean)
 786
 787 ### `bootclean'
 788 ###      Delete all files that need to be remade for a clean bootstrap.
 789 top_bootclean=\
 790         rm -f config.cache config.log
 791 ### `distclean'
 792 ###      Delete all files from the current directory that are created by
 793 ###      configuring or building the program.  If you have unpacked the
 794 ###      source and built the program without creating any other files,
 795 ###      `make distclean' should leave only the files that were in the
 796 ###      distribution.
 797 top_distclean=\
 798         ${top_bootclean}; \
 799         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 800 distclean: FRC
 801         (cd src;      $(MAKE) $(MFLAGS) distclean)
 802         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 803         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 804         (cd lib;      $(MAKE) $(MFLAGS) distclean)
 805         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 806         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 807         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 808         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 809         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 810         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 811         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 812         ${top_distclean}
 813
 814 ### `bootstrap-clean'
 815 ###      Delete everything that can be reconstructed by `make' and that
 816 ###      needs to be deleted in order to force a bootstrap from a clean state.
 817 bootstrap-clean: FRC
 818         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 819         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 820         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 821         (cd lib;      $(MAKE) $(MFLAGS) maintainer-clean)
 822         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 823         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 824         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 825         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 826         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 827         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 828         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 829         [ ! -f config.log ] || mv -f config.log config.log~
 830         ${top_bootclean}
 831 ## configure; make bootstrap replaces the real config.log from configure
 832 ## with the truncated one from config.status.  The former is more useful.
 833
 834 ### `maintainer-clean'
 835 ###      Delete everything from the current directory that can be
 836 ###      reconstructed with this Makefile.  This typically includes
 837 ###      everything deleted by distclean, plus more: C source files
 838 ###      produced by Bison, tags tables, info files, and so on.
 839 ###
 840 ###      One exception, however: `make maintainer-clean' should not delete
 841 ###      `configure' even if `configure' can be remade using a rule in the
 842 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 843 ###      anything that needs to exist in order to run `configure' and then
 844 ###      begin to build the program.
 845 top_maintainer_clean=\
 846         ${top_distclean}; \
 847         rm -fr autom4te.cache
 848 maintainer-clean: bootstrap-clean FRC
 849         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 850         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 851         ${top_maintainer_clean}
 852
 853 ### This doesn't actually appear in the coding standards, but Karl
 854 ### says GCC supports it, and that's where the configuration part of
 855 ### the coding standards seem to come from.  It's like distclean, but
 856 ### it deletes backup and autosave files too.
 857 extraclean:
 858         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 859         ${top_maintainer_clean}
 860         -rm -f config-tmp-*
 861         -rm -f *~ \#*
 862
 863 # The src subdir knows how to do the right thing
 864 # even when the build directory and source dir are different.
 865 TAGS tags: lib lib-src src
 866         cd src; $(MAKE) $(MFLAGS) tags
 867
 868 check:
 869         @if test ! -d test/automated; then \
 870           echo "You do not seem to have the test/ directory."; \
 871           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 872         else \
 873           cd test/automated && $(MAKE) $(MFLAGS) check; \
 874         fi
 875
 876 dist:
 877         cd ${srcdir}; ./make-dist
 878
 879 .PHONY: info dvi dist check html
 880
 881 info-real:
 882         (cd doc/emacs; $(MAKE) $(MFLAGS) info)
 883         (cd doc/misc; $(MAKE) $(MFLAGS) info)
 884         (cd doc/lispref; $(MAKE) $(MFLAGS) info)
 885         (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 886
 887 force-info:
 888 # Note that man/Makefile knows how to put the info files in $(srcdir),
 889 # so we can do ok running make in the build dir.
 890 # This used to have a clause that exited with an error if MAKEINFO = no.
 891 # But it is inappropriate to do so without checking if makeinfo is
 892 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
 893 # Only the doc/*/Makefiles can decide that, so we let those rules run
 894 # and give a standard error if makeinfo is needed but missing.
 895 # While it would be nice to give a more detailed error message, that
 896 # would require changing every rule in doc/ that builds an info file,
 897 # and it's not worth it.  This case is only relevant if you download a
 898 # release, then change the .texi files.
 899 info: force-info
 900         @if test "$(HAVE_MAKEINFO)" = "no"; then \
 901           echo "Configured --without-makeinfo, not building manuals" ; \
 902         else \
 903           $(MAKE) $(MFLAGS) info-real ; \
 904         fi
 905
 906 # The info/dir file must be updated by hand when new manuals are added.
 907 check-info-dir: info
 908         cd info ; \
 909         missing= ; \
 910         for file in *; do \
 911           test -f "$${file}" || continue ; \
 912           case $${file} in \
 913             *-[0-9]*|COPYING|dir) continue ;; \
 914           esac ; \
 915           file=`echo $${file} | sed 's/\.info//'` ; \
 916           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 917         done ; \
 918         if test -n "$${missing}"; then \
 919           echo "Missing info/dir entries: $${missing}" ; \
 920           exit 1 ; \
 921         fi ; \
 922         echo "info/dir is OK"
 923
 924 dvi:
 925         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 926         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 927         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 928         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 929
 930 #### Bootstrapping.
 931
 932 ### This first cleans the lisp subdirectory, removing all compiled
 933 ### Lisp files.  Then re-run make to build all the files anew.
 934
 935 .PHONY: bootstrap
 936
 937 ## configure; make bootstrap replaces the real config.log from configure
 938 ## with the truncated one from config.status.  The former is more useful.
 939 bootstrap: bootstrap-clean FRC
 940         if [ -x ./config.status ]; then           \
 941             ./config.status;                      \
 942         else                                      \
 943             ./configure $(CONFIGURE_FLAGS);       \
 944         fi
 945         $(MAKE) $(MFLAGS) info all
 946
 947 .PHONY: check-declare
 948
 949 check-declare:
 950         @if [ ! -f $(srcdir)/src/emacs ]; then \
 951           echo "You must build Emacs to use this command"; \
 952           exit 1; \
 953         fi
 954         (cd leim; $(MAKE) $(MFLAGS) $@)
 955         (cd lisp; $(MAKE) $(MFLAGS) $@)