3 # Copyright (C) 1994, 1996-2014 Free Software Foundation, Inc.
5 # This file is part of GNU Emacs.
7 # GNU Emacs is free software: you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation, either version 3 of the License, or
10 # (at your option) any later version.
12 # GNU Emacs is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
22 # NB If you add any more configure variables,
23 # update the sed rules in the dist target below.
25 # Where to find the source code. $(srcdir) will be the doc/emacs subdirectory
26 # of the source tree. This is set by configure's `--srcdir' option.
32 ## Where the output files go.
33 ## Note that the setfilename command in the .texi files assumes this.
34 ## This is a bit funny. Because the info files are in the
35 ## distribution tarfiles, they are always made in $scrdir/../../info,
36 ## even for out-of-tree builds.
37 buildinfodir
= $(srcdir)/..
/..
/info
38 # Directory with the (customized) texinfo.tex file.
39 texinfodir
= $(srcdir)/..
/misc
42 datarootdir
= @datarootdir@
44 PACKAGE_TARNAME
= @PACKAGE_TARNAME@
53 GZIP_PROG
= @GZIP_PROG@
55 HTML_OPTS
= --no-split
--html
57 # Options used only when making info output.
58 # --no-split is only needed because of MS-DOS.
59 # For a possible alternative, see
60 # http://lists.gnu.org/archive/html/emacs-devel/2011-01/msg01182.html
64 INSTALL_DATA
= @INSTALL_DATA@
66 # The makeinfo program is part of the Texinfo distribution.
67 # Use --force so that it generates output even if there are errors.
69 MAKEINFO_OPTS
= --force --enable-encoding
-I
$(srcdir)
76 ENVADD
= TEXINPUTS
="$(srcdir):$(texinfodir):$(TEXINPUTS)" \
77 MAKEINFO
="$(MAKEINFO) $(MAKEINFO_OPTS)"
79 DVI_TARGETS
= emacs.
dvi emacs-xtra.
dvi
80 HTML_TARGETS
= emacs.html
81 PDF_TARGETS
= emacs.pdf emacs-xtra.pdf
82 PS_TARGETS
= emacs.ps emacs-xtra.ps
85 ${srcdir}/emacs-xtra.texi \
86 $(srcdir)/arevert-xtra.texi \
87 $(srcdir)/cal-xtra.texi \
88 $(srcdir)/dired-xtra.texi \
89 $(srcdir)/picture-xtra.texi \
90 $(srcdir)/emerge-xtra.texi \
91 $(srcdir)/vc-xtra.texi \
92 $(srcdir)/vc1-xtra.texi \
93 $(srcdir)/fortran-xtra.texi \
94 $(srcdir)/msdog-xtra.texi
97 ${srcdir}/emacs.texi \
98 ${srcdir}/emacsver.texi \
99 ${srcdir}/doclicense.texi \
101 ${srcdir}/screen.texi \
102 ${srcdir}/commands.texi \
103 ${srcdir}/entering.texi \
104 ${srcdir}/basic.texi \
105 ${srcdir}/mini.texi \
107 ${srcdir}/help.texi \
108 ${srcdir}/mark.texi \
109 ${srcdir}/killing.texi \
110 ${srcdir}/regs.texi \
111 ${srcdir}/display.texi \
112 ${srcdir}/search.texi \
113 ${srcdir}/fixit.texi \
114 ${srcdir}/files.texi \
115 ${srcdir}/buffers.texi \
116 ${srcdir}/windows.texi \
117 ${srcdir}/frames.texi \
118 ${srcdir}/mule.texi \
119 ${srcdir}/modes.texi \
120 ${srcdir}/indent.texi \
121 ${srcdir}/text.texi \
122 ${srcdir}/programs.texi \
123 ${srcdir}/building.texi \
124 ${srcdir}/maintaining.texi \
125 ${srcdir}/abbrevs.texi \
126 ${srcdir}/sending.texi \
127 ${srcdir}/rmail.texi \
128 ${srcdir}/dired.texi \
129 ${srcdir}/calendar.texi \
130 ${srcdir}/misc.texi \
131 ${srcdir}/package.texi \
132 ${srcdir}/custom.texi \
133 ${srcdir}/trouble.texi \
134 ${srcdir}/cmdargs.texi \
135 ${srcdir}/xresources.texi \
136 ${srcdir}/anti.texi \
137 ${srcdir}/macos.texi \
138 ${srcdir}/msdog.texi \
140 ${srcdir}/glossary.texi \
142 ${srcdir}/kmacro.texi \
145 ## Disable implicit rules.
148 .PHONY
: info dvi html pdf ps
150 info: $(buildinfodir
)/emacs.
info
152 html
: $(HTML_TARGETS
)
156 ## The info/ directory exists in release tarfiles but not the repository.
160 # Note that all the Info targets build the Info files in srcdir.
161 # There is no provision for Info files to exist in the build directory.
162 # In a distribution of Emacs, the Info files should be up to date.
163 $(buildinfodir
)/emacs.
info: ${EMACSSOURCES} |
${buildinfodir}
164 $(MAKEINFO
) $(MAKEINFO_OPTS
) $(INFO_OPTS
) -o
$@
$<
166 emacs.
dvi: ${EMACSSOURCES}
167 $(ENVADD
) $(TEXI2DVI
) $<
169 emacs.pdf
: ${EMACSSOURCES}
170 $(ENVADD
) $(TEXI2PDF
) $<
172 emacs.html
: ${EMACSSOURCES}
173 $(MAKEINFO
) $(MAKEINFO_OPTS
) $(HTML_OPTS
) -o
$@
$<
175 emacs-xtra.
dvi: $(EMACS_XTRA
)
176 $(ENVADD
) $(TEXI2DVI
) $<
178 emacs-xtra.pdf
: $(EMACS_XTRA
)
179 $(ENVADD
) $(TEXI2PDF
) $<
184 .PHONY
: mostlyclean clean distclean bootstrap-clean maintainer-clean infoclean
188 rm -f
*.aux
*.log
*.toc
*.cp
*.cps
*.fn
*.fns
*.ky
*.kys \
189 *.op
*.ops
*.pg
*.pgs
*.tp
*.tps
*.vr
*.vrs
191 ## Products not in the release tarfiles.
193 rm -f
$(DVI_TARGETS
) $(HTML_TARGETS
) $(PDF_TARGETS
) $(PS_TARGETS
)
194 rm -f emacs-manual-
${version}.
tar*
199 ## In the standalone tarfile, the clean rule runs this.
202 $(buildinfodir
)/emacs.
info \
203 $(buildinfodir
)/emacs.info-
[1-9] \
204 $(buildinfodir
)/emacs.info-
[1-9][0-9]
206 bootstrap-clean maintainer-clean
: distclean infoclean
210 ## Make a standalone tarfile of the Emacs manual sources.
211 ## The [c] is a dumb way to prevent configure expanding it.
213 rm -rf emacs-manual-
${version}
214 mkdir emacs-manual-
${version}
215 cp
${srcdir}/*.texi
${texinfodir}/texinfo.
tex \
216 ${srcdir}/ChangeLog
* emacs-manual-
${version}/
217 sed
-e
's/@sr[c]dir@/./' -e
's/^\(texinfodir *=\).*/\1 ./' \
218 -e
's/^\(buildinfodir *=\).*/\1 ./' \
219 -e
's/^\(clean:.*\)/\1 infoclean/' \
220 -e
"s/@ver[s]ion@/${version}/" \
221 -e
's/@MAKE[I]NFO@/makeinfo/' -e
's/@MK[D]IR_P@/mkdir -p/' \
222 ${srcdir}/Makefile.in
> emacs-manual-
${version}/Makefile
223 @if grep
'@[a-zA-Z_]*@' emacs-manual-
${version}/Makefile
; then \
224 echo
"Unexpanded configure variables in Makefile?" 1>&2; exit
1; \
226 tar -cf emacs-manual-
${version}.
tar emacs-manual-
${version}
227 rm -rf emacs-manual-
${version}
230 .PHONY
: install-dvi install-html install-pdf install-ps install-doc
233 umask
022; $(MKDIR_P
) "$(DESTDIR)$(dvidir)"
234 $(INSTALL_DATA
) $(DVI_TARGETS
) "$(DESTDIR)$(dvidir)"
236 umask
022; $(MKDIR_P
) "$(DESTDIR)$(htmldir)"
237 $(INSTALL_DATA
) $(HTML_TARGETS
) "$(DESTDIR)$(htmldir)"
239 umask
022;$(MKDIR_P
) "$(DESTDIR)$(pdfdir)"
240 $(INSTALL_DATA
) $(PDF_TARGETS
) "$(DESTDIR)$(pdfdir)"
242 umask
022; $(MKDIR_P
) "$(DESTDIR)$(psdir)"
243 for file in
$(PS_TARGETS
); do \
244 $(INSTALL_DATA
) $${file} "$(DESTDIR)$(psdir)"; \
245 [ -n
"${GZIP_PROG}" ] || continue
; \
246 rm -f
"$(DESTDIR)$(psdir)/$${file}.gz"; \
247 ${GZIP_PROG} -9n
"$(DESTDIR)$(psdir)/$${file}"; \
250 ## Top-level Makefile installs the info pages.
251 install-doc
: install-dvi install-html install-pdf install-ps
254 .PHONY
: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps uninstall-doc
257 for file in
$(DVI_TARGETS
); do \
258 rm -f
"$(DESTDIR)$(dvidir)/$${file}"; \
261 for file in
$(HTML_TARGETS
); do \
262 rm -f
"$(DESTDIR)$(htmldir)/$${file}"; \
265 ext
= ; [ -n
"${GZIP_PROG}" ] && ext
=.gz
; \
266 for file in
$(PS_TARGETS
); do \
267 rm -f
"$(DESTDIR)$(psdir)/$${file}$${ext}"; \
270 for file in
$(PDF_TARGETS
); do \
271 rm -f
"$(DESTDIR)$(pdfdir)/$${file}"; \
274 uninstall-doc
: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
277 ### Makefile ends here