Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # make all      to compile and build Emacs.
   6 # make install  to install it.
   7 # make TAGS     to update tags tables.
   8 #
   9 # make clean  or  make mostlyclean
  10 #      Delete all files from the current directory that are normally
  11 #      created by building the program.  Don't delete the files that
  12 #      record the configuration.  Also preserve files that could be made
  13 #      by building, but normally aren't because the distribution comes
  14 #      with them.
  15 #
  16 #      Delete `.dvi' files here if they are not part of the distribution.
  17 #
  18 # make distclean
  19 #      Delete all files from the current directory that are created by
  20 #      configuring or building the program.  If you have unpacked the
  21 #      source and built the program without creating any other files,
  22 #      `make distclean' should leave only the files that were in the
  23 #      distribution.
  24 #
  25 # make realclean
  26 #      Delete everything from the current directory that can be
  27 #      reconstructed with this Makefile.  This typically includes
  28 #      everything deleted by distclean, plus more: C source files
  29 #      produced by Bison, tags tables, info files, and so on.
  30 #
  31 # make extraclean
  32 #      Still more severe - delete backup and autosave files, too.
  33
  34 SHELL = /bin/sh
  35
  36 # If Make doesn't predefine MAKE, set it here.
  37 @SET_MAKE@
  38
  39 # ==================== Things `configure' Might Edit ====================
  40
  41 CC=@CC@
  42 CPP=@CPP@
  43 C_SWITCH_SYSTEM=@c_switch_system@
  44 ALLOCA=@ALLOCA@
  45 LN_S=@LN_S@
  46 CFLAGS=@CFLAGS@
  47 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  48 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  49 YACC=@YACC@
  50
  51 ### These help us choose version- and architecture-specific directories
  52 ### to install files in.
  53
  54 ### This should be the number of the Emacs version we're building,
  55 ### like `18.59' or `19.0'.
  56 version=@version@
  57
  58 ### This should be the name of the configuration we're building Emacs
  59 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  60 configuration=@configuration@
  61
  62 # ==================== Where To Install Things ====================
  63
  64 # The default location for installation.  Everything is placed in
  65 # subdirectories of this directory.  The default values for many of
  66 # the variables below are expressed in terms of this one, so you may
  67 # not need to change them.  This defaults to /usr/local.
  68 prefix=@prefix@
  69
  70 # Like `prefix', but used for architecture-specific files.
  71 exec_prefix=@exec_prefix@
  72
  73 # Where to install Emacs and other binaries that people will want to
  74 # run directly (like etags).
  75 bindir=@bindir@
  76
  77 # Where to install architecture-independent data files.  ${lispdir}
  78 # and ${etcdir} are subdirectories of this.
  79 datadir=@datadir@
  80
  81 # Where to install and expect the files that Emacs modifies as it
  82 # runs.  These files are all architecture-independent. Right now, the
  83 # only such data is the locking directory; ${lockdir} is a
  84 # subdirectory of this.
  85 sharedstatedir=@statedir@
  86
  87 # Where to install and expect executable files to be run by Emacs
  88 # rather than directly by users, and other architecture-dependent
  89 # data.  ${archlibdir} is a subdirectory of this.
  90 libexecdir=@libexecdir@
  91
  92 # Where to install Emacs's man pages, and what extension they should have.
  93 mandir=@mandir@
  94 manext=.1
  95
  96 # Where to install and expect the info files describing Emacs.  In the
  97 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
  98 # since there are now many packages documented with the texinfo
  99 # system, it is inappropriate to imply that it is part of Emacs.
 100 infodir=@infodir@
 101
 102 # Where to find the source code.  The source code for Emacs's C kernel is
 103 # expected to be in ${srcdir}/src, and the source code for Emacs's
 104 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 105 # set by the configure script's `--srcdir' option.
 106 srcdir=@srcdir@
 107
 108 # Tell make where to find source files; this is needed for the makefiles.
 109 VPATH=@srcdir@
 110
 111 # ==================== Emacs-specific directories ====================
 112
 113 # These variables hold the values Emacs will actually use.  They are
 114 # based on the values of the standard Make variables above.
 115
 116 # Where to install the lisp files distributed with
 117 # Emacs.  This includes the Emacs version, so that the
 118 # lisp files for different versions of Emacs will install
 119 # themselves in separate directories.
 120 lispdir=@lispdir@
 121
 122 # Directories Emacs should search for lisp files specific
 123 # to this site (i.e. customizations), before consulting
 124 # ${lispdir}.  This should be a colon-separated list of
 125 # directories.
 126 locallisppath=@locallisppath@
 127
 128 # Where Emacs will search to find its lisp files.  Before
 129 # changing this, check to see if your purpose wouldn't
 130 # better be served by changing locallisppath.  This
 131 # should be a colon-separated list of directories.
 132 lisppath=@lisppath@
 133
 134 # Where Emacs will search for its lisp files while
 135 # building.  This is only used during the process of
 136 # compiling Emacs, to help Emacs find its lisp files
 137 # before they've been installed in their final location.
 138 # It's usually identical to lisppath, except that
 139 # it does not include locallisppath, and the
 140 # entry for the directory containing the installed lisp
 141 # files has been replaced with ../lisp.  This should be a
 142 # colon-separated list of directories.
 143 buildlisppath=${srcdir}/lisp
 144
 145 # Where to install the other architecture-independent
 146 # data files distributed with Emacs (like the tutorial,
 147 # the cookie recipes and the Zippy database). This path
 148 # usually contains the Emacs version number, so the data
 149 # files for multiple versions of Emacs may be installed
 150 # at once.
 151 etcdir=@etcdir@
 152
 153 # Where to create and expect the locking directory, where
 154 # the Emacs locking code keeps track of which files are
 155 # currently being edited.
 156 lockdir=@lockdir@
 157
 158 # Where to put executables to be run by Emacs rather than
 159 # the user.  This path usually includes the Emacs version
 160 # and configuration name, so that multiple configurations
 161 # for multiple versions of Emacs may be installed at
 162 # once.
 163 archlibdir=@archlibdir@
 164
 165 # Where to put the docstring file.
 166 docdir=@docdir@
 167
 168 # ==================== Utility Programs for the Build ====================
 169
 170 # Allow the user to specify the install program.
 171 INSTALL = @INSTALL@
 172 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 173 INSTALL_DATA = @INSTALL_DATA@
 174
 175 # ============================= Targets ==============================
 176
 177 # What emacs should be called when installed.
 178 EMACS = emacs
 179
 180 # Subdirectories to make recursively.  `lisp' is not included
 181 # because the compiled lisp files are part of the distribution
 182 # and you cannot remake them without installing Emacs first.
 183 SUBDIR = lib-src src
 184
 185 # The makefiles of the directories in $SUBDIR.
 186 SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
 187
 188 # Subdirectories to install, and where they'll go.
 189 # lib-src's makefile knows how to install it, so we don't do that here.
 190 # When installing the info files, we need to do special things to
 191 # avoid nuking an existing dir file, so we don't do that here;
 192 # instead, we have written out explicit code in the `install' targets.
 193 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 194 COPYDESTS = ${etcdir} ${lispdir}
 195
 196 all:    paths-force ${SUBDIR}
 197
 198 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 199
 200 # Note that sed is not in /bin on 386bsd.
 201 src/paths.h: Makefile ${srcdir}/src/paths.h.in
 202         @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
 203         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 204           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 205           sed < ${srcdir}/src/paths.h.in > paths.h.tmp$$$$              \
 206           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";'        \
 207           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
 208           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 209           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 210           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 211           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";'                    \
 212           -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') &&             \
 213         ${srcdir}/move-if-change paths.h.tmp$$$$ src/paths.h
 214
 215 # For `make all',
 216 # we force the rebuilding of src/paths.h because the user might give
 217 # make different values for the various directories.  Since we use
 218 # move-if-change, src/paths.h only actually changes if the user did
 219 # something notable, so the only unnecessary work we do is in building
 220 # paths.h.tmp$$$$, which isn't much.
 221 # Note that sed is not in /bin on 386bsd.
 222 # We depend on src/paths.h here to prevent simultaneous execution of
 223 # that rule and this one, in a parallel make.
 224 # It is possible for paths.h to be updated twice--but that would happen anyway.
 225 paths-force: FRC src/paths.h
 226         @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
 227         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 228           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 229           sed < ${srcdir}/src/paths.h.in > paths.h.tmp$$$$              \
 230           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";'        \
 231           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
 232           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 233           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 234           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 235           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";'                    \
 236           -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') &&             \
 237         ${srcdir}/move-if-change paths.h.tmp$$$$ src/paths.h
 238
 239 src:    lib-src FRC src/paths.h
 240
 241 # This ought to depend on src/paths.h, so that in parallel make
 242 # src/paths.h will be available for the compilations in lib-src.
 243 # But that causes trouble in `make install' if a different prefix
 244 # is specified at that time.
 245 lib-src: FRC src/paths.h
 246
 247 .RECURSIVE: ${SUBDIR}
 248
 249 ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
 250         cd $@; $(MAKE) all $(MFLAGS) \
 251           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 252           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 253
 254 blessmail: ${SUBDIR_MAKEFILES} src FRC
 255         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) MAKE='${MAKE}'
 256
 257 Makefile: Makefile.in config.status
 258         ./config.status
 259
 260 src/Makefile: src/Makefile.in.in config.status
 261         ./config.status
 262
 263 lib-src/Makefile: lib-src/Makefile.in config.status
 264         ./config.status
 265
 266 oldXMenu/Makefile: oldXMenu/Makefile.in config.status
 267         ./config.status
 268
 269 lwlib/Makefile: lwlib/Makefile.in config.status
 270         ./config.status
 271
 272 # ==================== Installation ====================
 273
 274 ## If we let lib-src do its own installation, that means we
 275 ## don't have to duplicate the list of utilities to install in
 276 ## this Makefile as well.
 277
 278 ## On AIX, use tar xBf.
 279 ## On Xenix, use tar xpf.
 280
 281 .PHONY: install mkdir
 282
 283 ## We delete each directory in ${COPYDESTS} before we copy into it;
 284 ## that way, we can reinstall over directories that have been put in
 285 ## place with their files read-only (perhaps because they are checked
 286 ## into RCS).  In order to make this safe, we make sure that the
 287 ## source exists and is distinct from the destination.
 288 ## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
 289 ## ever modify src/paths.h.
 290 install: ${SUBDIR} install-arch-dep install-arch-indep blessmail;
 291
 292 ### Note that we copy the DOC-* files from the build etc directory
 293 ### as well as lots of things from ${srcdir}/etc.
 294 install-arch-dep: mkdir
 295         (cd lib-src; \
 296           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 297             exec_prefix=${exec_prefix} bindir=${bindir} \
 298             libexecdir=${libexecdir} archlibdir=${archlibdir})
 299         ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
 300         -chmod 1755  ${bindir}/emacs-${version}
 301         rm -f ${bindir}/$(EMACS)
 302         -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
 303
 304 ### Note that we copy the DOC-* files from the build etc directory
 305 ### as well as lots of things from ${srcdir}/etc.
 306
 307 # These lines appeared after the second -set, but should be unnecessary.
 308 #        mkdir ${COPYDESTS} ; \
 309 #        chmod ugo+rx ${COPYDESTS} ; \
 310 install-arch-indep: mkdir
 311         -set ${COPYDESTS} ; \
 312          for dir in ${COPYDIR} ; do \
 313            if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 314              rm -rf $$1 ; \
 315            fi ; \
 316            shift ; \
 317          done
 318         -set ${COPYDESTS} ; \
 319          for dir in ${COPYDIR} ; do \
 320            dest=$$1 ; shift ; \
 321            [ -d $${dir} ] \
 322            && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 323            && (echo "Copying $${dir}..." ; \
 324                (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
 325                for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
 326                  rm -rf $${subdir}/RCS ; \
 327                  rm -rf $${subdir}/CVS ; \
 328                  rm -f  $${subdir}/\#* ; \
 329                  rm -f  $${subdir}/*~ ; \
 330                done) ; \
 331          done
 332         if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
 333         then \
 334            echo "Copying etc/DOC-* ..." ; \
 335            (cd etc; tar -cf - DOC-*)|(cd ${docdir}; umask 0; tar -xvf - ); \
 336         else true; fi
 337         thisdir=`/bin/pwd`; \
 338         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
 339         then \
 340           (cd ${srcdir}/info ; \
 341            if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
 342              (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
 343            fi ; \
 344            for f in cl* dired-x* emacs* forms* gnus* info* sc* vip* ; do \
 345              (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
 346            done); \
 347         else true; fi
 348         thisdir=`/bin/pwd`; cd ${srcdir}/etc; for page in emacs etags ctags ; do \
 349           (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext}); \
 350         done
 351
 352 ### Build all the directories we're going to install Emacs in.  Since
 353 ### we may be creating several layers of directories (for example,
 354 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 355 ### instead of mkdir.  Not all systems' mkdirs have the `-p' flag.
 356 mkdir: FRC
 357         $(srcdir)/mkinstalldirs ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
 358           ${bindir} ${datadir} ${docdir} ${libexecdir} \
 359           `echo ${locallisppath} | sed 's/:/ /g'`
 360         -chmod 777 ${lockdir}
 361
 362 ### Delete all the installed files that the `install' target would
 363 ### create (but not the noninstalled files such as `make all' would
 364 ### create).
 365 ###
 366 ### Don't delete the lisp and etc directories if they're in the source tree.
 367 uninstall:
 368         (cd lib-src;                                    \
 369          $(MAKE) $(MFLAGS) uninstall                    \
 370             prefix=${prefix} exec_prefix=${exec_prefix} \
 371             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 372         for dir in ${lispdir} ${etcdir} ; do            \
 373           if [ -d $${dir} ]; then                       \
 374             case `(cd $${dir} ; /bin/pwd)` in           \
 375               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 376               * ) rm -rf $${dir} ;;                     \
 377             esac ;                                      \
 378             case $${dir} in                             \
 379               ${datadir}/emacs/${version}/* )           \
 380                 rm -rf ${datadir}/emacs/${version}      \
 381               ;;                                        \
 382             esac ;                                      \
 383           fi ;                                          \
 384         done
 385         (cd ${infodir}; rm -f cl* emacs* forms* info* vip*)
 386         (cd ${mandir};  rm -f emacs.1 etags.1 ctags.1)
 387         (cd ${bindir};  rm -f emacs-${version} $(EMACS))
 388
 389
 390 FRC:
 391
 392 # ==================== Cleaning up and miscellanea ====================
 393
 394 .PHONY: mostlyclean clean distclean realclean extraclean
 395
 396 ### `mostlyclean'
 397 ###      Like `clean', but may refrain from deleting a few files that people
 398 ###      normally don't want to recompile.  For example, the `mostlyclean'
 399 ###      target for GCC does not delete `libgcc.a', because recompiling it
 400 ###      is rarely necessary and takes a lot of time.
 401 mostlyclean: FRC
 402         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 403         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 404         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 405         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 406         -(cd man &&   $(MAKE) $(MFLAGS) mostlyclean)
 407
 408 ### `clean'
 409 ###      Delete all files from the current directory that are normally
 410 ###      created by building the program.  Don't delete the files that
 411 ###      record the configuration.  Also preserve files that could be made
 412 ###      by building, but normally aren't because the distribution comes
 413 ###      with them.
 414 ###
 415 ###      Delete `.dvi' files here if they are not part of the distribution.
 416 clean: FRC
 417         (cd src;      $(MAKE) $(MFLAGS) clean)
 418         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 419         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 420         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 421         -(cd man &&   $(MAKE) $(MFLAGS) clean)
 422
 423 ### `distclean'
 424 ###      Delete all files from the current directory that are created by
 425 ###      configuring or building the program.  If you have unpacked the
 426 ###      source and built the program without creating any other files,
 427 ###      `make distclean' should leave only the files that were in the
 428 ###      distribution.
 429 top_distclean=\
 430         rm -f config.status ; \
 431         rm -f Makefile ${SUBDIR_MAKEFILES} ; \
 432         (cd lock ; rm -f *)
 433 distclean: FRC
 434         (cd src;      $(MAKE) $(MFLAGS) distclean)
 435         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 436         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 437         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 438         (cd man &&    $(MAKE) $(MFLAGS) distclean)
 439         ${top_distclean}
 440
 441
 442 ### `realclean'
 443 ###      Delete everything from the current directory that can be
 444 ###      reconstructed with this Makefile.  This typically includes
 445 ###      everything deleted by distclean, plus more: C source files
 446 ###      produced by Bison, tags tables, info files, and so on.
 447 ###
 448 ###      One exception, however: `make realclean' should not delete
 449 ###      `configure' even if `configure' can be remade using a rule in the
 450 ###      Makefile.  More generally, `make realclean' should not delete
 451 ###      anything that needs to exist in order to run `configure' and then
 452 ###      begin to build the program.
 453 realclean: FRC
 454         (cd src;      $(MAKE) $(MFLAGS) realclean)
 455         (cd oldXMenu; $(MAKE) $(MFLAGS) realclean)
 456         (cd lwlib;    $(MAKE) $(MFLAGS) realclean)
 457         (cd lib-src;  $(MAKE) $(MFLAGS) realclean)
 458         -(cd man &&   $(MAKE) $(MFLAGS) realclean)
 459         ${top_distclean}
 460
 461 ### This doesn't actually appear in the coding standards, but Karl
 462 ### says GCC supports it, and that's where the configuration part of
 463 ### the coding standards seem to come from.  It's like distclean, but
 464 ### it deletes backup and autosave files too.
 465 extraclean:
 466         for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 467         -(cd lock; rm *)
 468         -rm config.status config-tmp-*
 469         -rm -f *~ \#*
 470
 471 ### Unlocking and relocking.  The idea of these productions is to reduce
 472 ### hassles when installing an incremental tar of Emacs.  Do `make unlock'
 473 ### before unlocking the file to take the write locks off all sources so
 474 ### that tar xvof will overwrite them without fuss.  Then do `make relock'
 475 ### afterward so that VC mode will know which files should be checked in
 476 ### if you want to mung them.
 477 ###
 478 ### Note: it's no disaster if these productions miss a file or two; tar
 479 ### and VC will swiftly let you know if this happens, and it is easily
 480 ### corrected.
 481 SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
 482         README configure make-dist move-if-change
 483
 484 .PHONY: unlock relock
 485
 486 unlock:
 487         chmod u+w $(SOURCES) cpp/*
 488         -(cd elisp; chmod u+w Makefile README *.texi)
 489         (cd etc; $(MAKE) $(MFLAGS) unlock)
 490         (cd lib-src; $(MAKE) $(MFLAGS) unlock)
 491         (cd lisp; $(MAKE) $(MFLAGS) unlock)
 492         (cd lisp/term; chmod u+w README *.el)
 493         (cd man; chmod u+w *texi* ChangeLog split-man)
 494         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 495         (cd lwlib; chmod u+w *.[ch] Makefile README)
 496         (cd src; $(MAKE) $(MFLAGS) unlock)
 497
 498 relock:
 499         chmod u-w $(SOURCES) cpp/*
 500         -(cd elisp; chmod u-w Makefile README *.texi)
 501         (cd etc; $(MAKE) $(MFLAGS) relock)
 502         (cd lib-src; $(MAKE) $(MFLAGS) relock)
 503         (cd lisp; $(MAKE) $(MFLAGS) relock)
 504         (cd lisp/term; chmod u+w README *.el)
 505         (cd man; chmod u+w *texi* ChangeLog split-man)
 506         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 507         (cd lwlib; chmod u+w *.[ch] Makefile README)
 508         (cd src; $(MAKE) $(MFLAGS) relock)
 509
 510 TAGS tags:      lib-src
 511         cd ${srcdir}/src; $(MAKE) tags
 512
 513 check:
 514         @echo "We don't have any tests for GNU Emacs yet."
 515
 516 dist:
 517         cd ${srcdir}; make-dist
 518
 519 .PHONY: info dvi dist check
 520 force-info:
 521 info: force-info
 522         (cd ${srcdir}/man; $(MAKE) $(MFLAGS) info)
 523 dvi:
 524         (cd ${srcdir}/man; $(MAKE) $(MFLAGS) dvi)