1 2001-10-31 Eli Zaretskii <eliz@is.elta.co.il>
3 * Makefile.in (SOURCES): Replace GETTING.GNU.SOFTWARE with FTP.
4 From Eric S. Raymond <esr@golux.thyrsus.com>.
6 2001-10-28 Eli Zaretskii <eliz@is.elta.co.il>
8 * configure.in (s390-*-linux-gnu): New system. From Adam Thornton
9 <athornton@sinenomine.net>.
11 2001-10-25 Gerd Moellmann <gerd@gnu.org>
13 * Makefile.in (maybe_bootstrap): New target.
14 (all): Add to prerequisites to bootstrap if abbrev.elc doesn't
17 2001-10-24 Ken Raeburn <raeburn@gnu.org>
19 * configure.in: If --with-hesiod is given, look for
20 hes_getmailhost and res_send or __res_send; check hesiod and
21 resolv libraries respectively if system libraries don't supply
24 2001-10-24 Gerd Moellmann <gerd@gnu.org>
26 * configure.in: Use $MAKE for `make' if set.
28 2001-10-22 Gerd Moellmann <gerd@gnu.org>
30 * Makefile.in (install-arch-indep): Add -h (follow symlinks)
33 2001-10-20 Gerd Moellmann <gerd@gnu.org>
35 * (Version 21.1 released).
37 2001-10-20 Miles Bader <miles@gnu.org>
39 * configure.in (configuration): Set from `host' if `host_alias'
42 2001-10-19 Andreas Schwab <schwab@suse.de>
44 * configure.in: Make ready for autoconf 2.5x.
45 (AC_PREREQ): Require autoconf 2.50.
46 * aclocal.m4: Removed.
47 * configure: Regenerated.
48 * Makefile.in (${srcdir}/configure): Don't depend on aclocal.m4.
50 2001-10-13 Eli Zaretskii <eliz@is.elta.co.il>
52 * README: Bump Emacs version to 21.1.50.
54 2001-10-05 Gerd Moellmann <gerd@gnu.org>
58 2001-09-05 Gerd Moellmann <gerd@gnu.org>
60 * configure.in: Avoid `$@' which is handled specially in
61 Autoconf 2.52. From "Adam J. Richter" <adam@yggdrasil.com>.
63 2001-09-01 Eli Zaretskii <eliz@is.elta.co.il>
65 * make-dist (nt): Add subdirs.el to the list of distributed files.
67 2001-08-14 Eli Zaretskii <eliz@is.elta.co.il>
69 * configure.in (machine): Add an entry for
70 hppa1.1-hitachi-hiuxwe2*.
72 2001-05-28 Gerd Moellmann <gerd@gnu.org>
74 * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
75 LC_MESSAGES and LANG. From Karl Eichwalder <keichwa@gmx.net>.
77 2001-05-14 Gerd Moellmann <gerd@gnu.org>
79 * make-dist: Copy texinfo.tex unconditionally.
81 2001-04-25 Eli Zaretskii <eliz@is.elta.co.il>
83 * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
86 2001-04-06 Gerd Moellmann <gerd@gnu.org>
88 * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
89 Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
91 * make-dist: Handle leim/MISC-DIC. Only include
92 `[a-zA-Z]*.{el,elc}' from leim/quail.
94 2001-04-05 Gerd Moellmann <gerd@gnu.org>
96 * Makefile.in (install-arch-indep): Remove .cvsignore files.
98 2001-03-30 Gerd Moellmann <gerd@gnu.org>
100 * Makefile.in (.PHONY): Add for bootstrap targets.
101 (bootstrap-clean): New target.
102 (bootstrap): Use it instead of `clean'.
104 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
106 * Makefile.in (SUBDIR): Remove leim.
107 (all, .RECURSIVE, extraclean): Add leim explicitly.
108 (leim): Provide separate rule which exports PARALLEL=0 into the
111 2001-03-20 Gerd Moellmann <gerd@gnu.org>
113 * configure.in (HAVE_XPM): Don't print the result of the check for
114 XpmReturnAllocPixels if we don't have an xpm.h.
116 2001-03-05 Gerd Moellmann <gerd@gnu.org>
120 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
122 * config.bat: Update the copyright.
124 2001-02-23 Kenichi Handa <handa@etl.go.jp>
126 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
127 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
128 to `yes'. Later in AC_OUTPUT, check this variable.
130 2001-02-09 Dave Love <fx@gnu.org>
134 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
136 * info/dir (Ebrowse): Fix the entry (was missing a dot).
138 2001-02-02 Gerd Moellmann <gerd@gnu.org>
140 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
142 * Makefile.in (uninstall): Ignore exit code of `rm'.
144 * Makefile.in (uninstall): Remove more info files. Remove
145 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
147 2001-01-31 Gerd Moellmann <gerd@gnu.org>
149 * noleim-Makefile.in (extraclean): Add.
151 2001-01-28 Gerd Moellmann <gerd@gnu.org>
153 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
156 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
158 * Makefile.in (tags): Fix typo.
160 2001-01-13 Kenichi Handa <handa@etl.go.jp>
162 * configure.in: Fix typo in the code setting x_search_path.
164 2001-01-10 Dave Love <fx@gnu.org>
166 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
168 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
169 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
170 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
171 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
174 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
176 * config.bat: Run the preprocessor with -traditional.
178 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
180 * INSTALL: Move copying conditions to end of file.
182 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
184 * INSTALL: Add basic installation procedure which assumes
185 `configure' does its job. Elaborate on image support libraries.
186 Add a pointer to Xaw3d library. Add advice about solving
187 configure-time problems by looking in config.log and setting
188 variables in the environment.
190 2000-12-27 Gerd Moellmann <gerd@gnu.org>
192 * Makefile.in (install-arch-indep): If tar fails, exit with
195 2000-12-19 Gerd Moellmann <gerd@gnu.org>
197 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
198 source file includes XKBlib.h. On some broken Solaris systems,
199 there is an XKBlib.h, reportedly, but header files included by
200 XKBlib.h are missing.
202 2000-12-14 Gerd Moellmann <gerd@gnu.org>
204 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
206 2000-12-11 Dave Love <fx@gnu.org>
208 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
210 2000-12-11 Paul Eggert <eggert@twinsun.com>
212 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
213 Merge fixes from latest GNU tar version. These macros no longer
214 futz with _XOPEN_SOURCE, as that was not portable in practice.
215 (AC_FUNC_FSEEKO): New macro.
217 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
220 2000-12-05 Dave Love <fx@gnu.org>
222 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
224 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
226 * info/dir: Change the category to "Emacs".
228 2000-12-01 Gerd Moellmann <gerd@gnu.org>
230 * make-dist (tempdir): Remove epaths.h from the distribution
233 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
235 * config.bat: Check for existence of djecho.exe, and print an
236 error message if it is not available.
238 * INSTALL: Describe possible problem with djecho.exe in old
239 versions of DJGPP v2.x.
241 2000-11-23 Gerd Moellmann <gerd@gnu.org>
243 * configure.in: Initialize HAVE_LIBXP to no.
245 2000-11-22 Gerd Moellmann <gerd@gnu.org>
247 * configure.in: Use m/macppc.h instead of the non-existent
250 2000-11-21 Gerd Moellmann <gerd@gnu.org>
252 * Makefile.in (install-arch-indep): Also install info/eshell*
255 * configure.in (HAVE_PNG): Check for the presence of
256 png_get_channels to rule out older PNG libs.
258 * configure.in (AC_OUTPUT): Arrange to emit definitions of
259 GCC and NON_GNU_CPP into config.status.
261 2000-11-20 Dave Love <fx@gnu.org>
263 * configure.in: Fix last change.
265 * GETTING.GNU.SOFTWARE: Deleted.
266 * FTP: New file to replace it.
267 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
269 2000-11-20 Gerd Moellmann <gerd@gnu.org>
271 * configure.in: Use -traditional with GNU cpp.
273 2000-11-17 Gerd Moellmann <gerd@gnu.org>
275 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
276 Distribute more files from the nt/ subdir. Distribute PBM
277 image files from subdirs of lisp/. Distribute old change logs
278 from subdirs of lisp/. Distribute play/5x5.el.
280 2000-11-11 Dave Love <fx@gnu.org>
282 * config.sub, config.guess: Updated from master source.
284 2000-11-07 Dave Love <fx@gnu.org>
286 * configure.in: Test for mkstemp.
288 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
290 * info/dir (Top): Rearrange menu items more logically, and put
291 them into a single category. Add menu items for RefTeX and
294 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
296 * Makefile.in (install-arch-indep): Use --info-dir instead of
297 --dir-file, and a simple argument instead of --info-file, so that
298 the Debian version of install-info also works.
300 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
302 * info/dir (Speedbar): Add entry.
304 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
306 * INSTALL: Describe the new image-support options to the configure
307 script. List URLs where image support libraries can be found.
309 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
311 * info/dir (Top): Add an entry for Eshell.
313 2000-10-02 Dave Love <fx@gnu.org>
315 * configure.in: Check for gai_strerror.
317 2000-10-01 Andreas Schwab <schwab@suse.de>
319 * Makefile.in (install-arch-indep): Update list of installed info
322 2000-09-30 Gerd Moellmann <gerd@gnu.org>
324 * configure.in: Support `sparc*-*-netbsd*'.
326 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
328 * info/dir (MIME): Add entry for emacs-mime.
330 2000-09-29 Dave Love <fx@gnu.org>
332 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
334 2000-09-26 Gerd Moellmann <gerd@gnu.org>
336 * make-dist: Adapt to the change of leim/Makefile which was
337 necessary to ensure a reasonably working `make dist'.
339 * leim-Makefile.in: Moved to leim/Makefile.in..
341 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
343 2000-09-21 Kenichi Handa <handa@etl.go.jp>
345 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
346 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
347 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
349 (${TIT}): Adjusted for the above change.
350 (clean mostlyclean): Likewise.
351 (.el.elc): New target.
353 2000-09-19 Gerd Moellmann <gerd@gnu.org>
355 * make-dist: Include XPM and XBM files in lisp/ and subdirs
358 2000-09-18 Gerd Moellmann <gerd@gnu.org>
360 * make-dist (skk): Rename to `ja-dic' because the leim directory
363 2000-09-14 Dave Love <fx@gnu.org>
365 * configure.in: Fix spurion in last change.
367 2000-09-14 Gerd Moellmann <gerd@gnu.org>
369 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
370 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
371 to `no' if defined. Change result report.
373 2000-09-08 Dave Love <fx@gnu.org>
375 * configure.in: Remove spurious `@'s.
377 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
380 2000-09-06 Gerd Moellmann <gerd@gnu.org>
382 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
383 file and print informational message.
385 * configure.in (AC_FUNC_MMAP): Add.
387 2000-09-01 Gerd Moellmann <gerd@gnu.org>
389 * configure.in: Add ``checking'' messages for
390 XpmReturnAllocPixels.
392 2000-08-28 Gerd Moellmann <gerd@gnu.org>
394 * configure.in: Check <strings.h>; check `index' and `rindex'
397 2000-08-26 Kenichi Handa <handa@etl.go.jp>
399 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
400 "case "${canonical}" in".
402 2000-08-25 Dave Love <fx@gnu.org>
404 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
406 2000-08-25 Kenichi Handa <handa@etl.go.jp>
408 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
410 2000-08-24 Gerd Moellmann <gerd@gnu.org>
412 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
413 contains a relative path. Protect against unusable values of
416 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
418 * info/dir (WoMan): Add entry.
420 * config.bat (maindir): Update src/_gdbinit even if it does
423 2000-08-07 Gerd Moellmann <gerd@gnu.org>
425 * Makefile.in (config.status): Prepend `$(srcdir)/' to
428 2000-08-03 Gerd Moellmann <gerd@gnu.org>
430 * configure.in: Add support for ia64*-*-linux*.
432 2000-07-27 Gerd Moellmann <gerd@gnu.org>
434 * make-dist (aclocal.m4): Include in distribution.
436 2000-07-26 Dave Love <fx@gnu.org>
438 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
440 2000-07-24 Dave Love <fx@gnu.org>
442 * configure.in: Add AC_SIZE_T.
444 2000-07-18 Dave Love <fx@gnu.org>
446 * configure.in: Reorder so that most tests are done after CPPFLAGS
447 is set from the C_SWITCH_... definitions.
449 2000-07-10 Gerd Moellmann <gerd@gnu.org>
451 * configure.in (HAVE_XPM): Undo previous change. Check for
452 preprocessor define XpmReturnAllocPixels.
454 2000-07-06 Gerd Moellmann <gerd@gnu.org>
456 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
457 instead of XpmReadFileToPixmap.
459 2000-07-05 Ken Raeburn <raeburn@gnu.org>
461 * configure.in: Check for <soundcard.h>. Look for ossaudio
462 library, and set LIBSOUND accordingly.
464 2000-07-05 Dave Love <fx@gnu.org>
466 * configure.in: Use AC_HEADER_SYS_WAIT.
468 2000-07-05 Gerd Moellmann <gerd@gnu.org>
470 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
471 lisp/Makefile. Distribute lisp/Makefile.in instead of
474 2000-06-30 Ken Raeburn <raeburn@gnu.org>
476 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
477 while searching for image-handling libraries.
479 2000-06-26 Gerd Moellmann <gerd@gnu.org>
481 * configure.in (--with-xim): New option.
483 2000-06-23 Dave Love <fx@gnu.org>
485 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
486 for struct timezone and test how we can call gettimeofday.
487 Check for OSF 5+. Check for term.h.
489 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
492 2000-06-23 Gerd Moellmann <gerd@gnu.org>
494 * configure.in (HAVE_LIBXP): Change test for libXp.
496 2000-06-21 Dave Love <fx@gnu.org>
498 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
499 simple test for getloadavg and substitute GETLOADAVG_LIBS.
500 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
502 2000-06-19 Dave Love <fx@gnu.org>
504 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
505 _XOPEN_SOURCE is defined.
507 2000-06-16 Gerd Moellmann <gerd@gnu.org>
509 * Makefile.in (distclean): Also make distclean in lisp/.
511 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
513 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
515 2000-06-15 Gerd Moellmann <gerd@gnu.org>
517 * make-dist: Add --help and --snapshot options.
519 2000-06-14 Gerd Moellmann <gerd@gnu.org>
521 * configure.in: Generate lisp/Makefile.
523 * configure.in: Add support for `*-lynxos*'.
524 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
525 recommended by <Karen.Dorhamer@compaq.com> to fix problems
528 2000-06-13 Ken Raeburn <raeburn@gnu.org>
530 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
531 it's on a continuation line.
533 2000-06-02 Dave Love <fx@gnu.org>
535 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
538 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
539 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
542 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
543 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
545 2000-05-26 Gerd Moellmann <gerd@gnu.org>
547 * configure.in: Add check for speed_t typedef.
549 2000-05-25 Ken Raeburn <raeburn@gnu.org>
551 * Makefile.in (install-arch-dep): Install fns-*.el only if it
552 exists; it won't in the CANNOT_DUMP case.
554 2000-05-25 Gerd Moellmann <gerd@gnu.org>
556 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
557 On FreeBSD, the exit status is 1 if CDPATH is not set.
558 (install-arch-indep): Install ebrowse.info.
560 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
562 * configure.in: Check for grandpt and getpt.
564 2000-05-09 Dave Love <fx@gnu.org>
566 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
568 2000-05-05 Gerd Moellmann <gerd@gnu.org>
570 * make-dist: Make a link for lib-src/grep-changelog. Copy
573 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
575 * config.bat: Identify the beginning of the cpp stuff in
576 src/Makefile.in and lib-src/Makefile.in more accurately.
578 2000-04-27 Gerd Moellmann <gerd@gnu.org>
580 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
582 2000-04-19 Gerd Moellmann <gerd@gnu.org>
584 * configure.in: Add support for `powerpc-*-netbsd*'.
586 2000-04-19 Dave Love <fx@gnu.org>
588 * configure.in: Don't use AC_FUNC_GETLOADAVG.
590 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
592 2000-04-16 Dave Love <fx@gnu.org>
594 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
596 2000-04-14 Dave Love <fx@gnu.org>
598 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
600 * aclocal.m4 (AC_FUNC_MKTIME): New.
602 2000-03-28 Ken Raeburn <raeburn@gnu.org>
604 * configure.in: Line up "--help" output a little better.
606 2000-03-26 Gerd Moellmann <gerd@gnu.org>
608 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
610 (bootstrap): Rewritten in terms of the new targets above. Make
613 2000-03-12 Gerd Moellmann <gerd@gnu.org>
615 * config.guess, config.sub: Use the versions of the files from
618 2000-03-08 Dave Love <fx@gnu.org>
620 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
621 AC_C_VOLATILE. Define POINTER_TYPE.
623 * aclocal.m4: New file.
625 2000-03-02 Gerd Moellmann <gerd@gnu.org>
627 * configure.in (machine): Add `mipsel-*-netbsd*' and
630 2000-03-01 Gerd Moellmann <gerd@gnu.org>
632 * configure.in (machine): Add support for `*-auspex-sunos*'.
634 2000-02-29 Gerd Moellmann <gerd@gnu.org>
636 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
638 2000-02-18 Dave Love <fx@gnu.org>
640 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
642 2000-02-18 Andreas Schwab <schwab@suse.de>
644 * Makefile.in (install-arch-indep): Add eudc to list of installed
647 2000-02-17 Ken Raeburn <raeburn@gnu.org>
649 * configure.in: Include -lz and -ljpeg (if it's available) when
650 testing for the tiff library.
652 2000-02-17 Gerd Moellmann <gerd@gnu.org>
654 * configure.in: Remove LISP_FLOAT_TYPE.
656 2000-02-12 Dave Love <fx@gnu.org>
658 * configure.in: Use AC_FUNC_VFORK.
660 2000-02-01 Gerd Moellmann <gerd@gnu.org>
662 * make-dist: Various fixes for new development tree.
664 * leim-Makefile.in: New file.
666 2000-01-31 Gerd Moellmann <gerd@gnu.org>
668 * Makefile.in (dist): Call ./make-dist.
670 2000-01-24 Dave Love <fx@gnu.org>
672 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
674 2000-01-18 Gerd Moellmann <gerd@gnu.org>
676 * configure.in (HAVE_GIF): Check for DGifOpen instead of
679 2000-01-11 Andreas Schwab <schwab@suse.de>
681 * Makefile.in (install-arch-indep): Update list of info files to
684 2000-01-05 Dave Love <fx@gnu.org>
686 * configure.in: Check for jerror.h as well as libjpeg.
688 2000-01-03 Andreas Schwab <schwab@suse.de>
690 * Makefile.in (install-arch-indep): Install autotype*. Run
691 install-info on autotype and emacs-faq.info.
693 1999-12-04 Dave Love <fx@gnu.org>
695 * Makefile.in: (install-arch-indep): Depend on `info'.
696 (install-strip): Use `install' as sub-make target.
698 1999-11-23 Ken Raeburn <raeburn@gnu.org>
700 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
701 didn't need to be deleted. Check for the k5crypto library as well
702 as the crypto library; MIT Kerberos 1.1 changed the name.
704 1999-11-18 Dave Love <fx@gnu.org>
706 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
708 1999-11-11 Erik Naggum <erik@naggum.no>
710 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
712 1999-11-08 Dave Love <fx@gnu.org>
714 * configure.in: Fix change for --with-pop default.
716 1999-11-04 Dave Love <fx@gnu.org>
718 * configure.in: Default to --with-pop. Change sense of with-gcc
719 and with-toolkit-scroll-bars messages to reflect the defaults.
721 1999-11-01 Gerd Moellmann <gerd@gnu.org>
723 * INSTALL: Mention the Emacs Lisp Reference.
725 1999-10-27 Noah Friedman <friedman@splode.com>
727 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
729 1999-10-23 Gerd Moellmann <gerd@gnu.org>
731 * Makefile.in (bootstrap): New target.
733 1999-10-19 Paul Eggert <eggert@twinsun.com>
735 Add support for large files. Merge glibc 2.1.2.
737 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
738 (HAVE_TM_GMTOFF): New symbol.
739 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
741 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
743 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
745 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
746 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
748 1999-10-09 Richard M. Stallman <rms@gnu.org>
750 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
751 Unset CDPATH to prevent cd from generating output.
753 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
755 * update-subdirs: also ignore CVS subdirs.
757 1999-10-07 Gerd Moellmann <gerd@gnu.org>
759 * Makefile.in (install-arch-indep): Add ada-mode.
761 1999-10-06 Dave Love <fx@gnu.org>
763 * Makefile.in: Add rules for config.status, configure.
765 1999-09-07 Gerd Moellmann <gerd@gnu.org>
767 * configure.in (--with-sound): Removed.
769 1999-08-30 Gerd Moellmann <gerd@gnu.org>
771 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
773 (HAVE_TIFF): Add -lm to library check.
775 1999-08-28 Richard Stallman <rms@gnu.org>
777 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
778 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
779 after the other X-related libraries.
781 1999-08-21 Dave Love <fx@gnu.org>
783 * configure.in: Don't check for jpeglib.h.
785 1999-08-20 Gerd Moellmann <gerd@gnu.org>
787 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
788 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
790 1999-08-18 Dave Love <fx@gnu.org>
792 * configure.in: : Check for termcap.h.
794 1999-08-15 Gerd Moellmann <gerd@gnu.org>
796 * configure.in: Add --with-toolkit-scroll-bars. If "no",
797 use Emacs' scroll bars, even if configured for Motif or when
800 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
802 * configure.in: Check for getaddrinfo.
804 1999-08-04 Eli Zaretskii <eliz@gnu.org>
806 * config.bat: Make --no-debug work again by removing -gcoff.
808 1999-07-30 Dave Love <fx@gnu.org>
810 * configure.in: Check for stdlib.h.
812 1999-07-19 Dave Love <fx@gnu.org>
814 * configure.in: Grok sparc64-*-linux-gnu*.
816 1999-07-12 Richard Stallman <rms@gnu.org>
818 * Version 20.4 released.
820 1999-06-23 Karl Heuer <kwzh@gnu.org>
822 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
823 Quote $EMACS, in case it's a program with args.
825 1999-05-29 Richard M. Stallman <rms@gnu.org>
827 * configure.in: Delete the Kerberos stuff.
829 1999-05-27 Greg Hudson <ghudson@mit.edu>
831 * configure.in: Prefer kerberos 5 names.
833 1999-04-26 Richard M. Stallman <rms@gnu.org>
835 * configure.in: Check for libXp.
837 1999-04-08 Richard Stallman <rms@gnu.org>
839 * make-dist: Include change logs in subdirs of `lisp'.
841 1999-04-05 Richard Stallman <rms@gnu.org>
843 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
844 (install-arch-indep): Make ${datadir}/emacs world-readable.
846 1999-03-30 Eli Zaretskii <eliz@gnu.org>
848 * config.bat: Use epaths.* instead of paths.*.
850 1999-03-07 Eli Zaretskii <eliz@gnu.org>
852 * INSTALL: Add detailed instructions to unpack and install
855 1999-02-26 Richard Stallman <rms@gnu.org>
857 * configure.in: Use epaths.h and epaths-force instead of paths....
859 * Makefile.in (epaths-force): Renamed from paths-force;
860 operate on epaths.in and produce epaths.h.
862 1999-02-24 Richard Stallman <rms@gnu.org>
864 * make-dist: Fix nt/icons directory handling.
866 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
868 * configure.in (f301-fujitsu-uxpv4.1): New target.
870 1999-02-20 Richard Stallman <rms@gnu.org>
872 * make-dist (tempparent): Fix command to update info files.
874 1999-02-09 Richard Stallman <rms@gnu.org>
876 * configure.in (powerpc-apple-netbsd*): New alternative.
878 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
880 * make-dist: Include the new directory nt/icons in distributions.
882 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
884 * configure.in: Change message about HAVE_XFREE386.
886 1999-01-07 Eli Zaretskii <eliz@gnu.org>
888 * config.bat: Support configuring with leim.
890 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
892 * configure.in (mips-sgi-irix6.5): New target.
894 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
896 * configure.in: Remove GSS-API support, since it has been removed
899 1998-12-04 Markus Rost <rost@delysid.gnu.org>
901 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
903 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
905 * Makefile.in: Don't install customize info file. Run
906 install-info on viper info file.
908 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
910 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
912 1998-11-16 Kenichi Handa <handa@etl.go.jp>
914 * configure.in (*-*-bsdi4*): New target.
916 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
918 * configure.in: Fix previous change.
920 1998-11-11 Richard Stallman <rms@gnu.org>
922 * configure.in (aviion-intel): New machine.
924 1998-11-04 Kenichi Handa <handa@etl.go.jp>
926 * configure.in (mips-nec-sysv4*): New target.
928 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
930 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
933 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
935 * make-dist: Don't include fns*.el in dist.
937 1998-10-30 Dave Love <fx@gnu.org>
939 * configure.in: Don't mkdir cpp.
941 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
943 * Makefile.in (install-arch-dep): Install src/fns-*.el in
946 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
948 * Version 20.3 released.
950 1998-07-30 Paul Eggert <eggert@twinsun.com>
952 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
953 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
954 (lwlib/Makefile, leim/Makefile):
955 Prepend $(srcdir)/ to rule dependencies outside this dir.
957 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
959 * configure.in: Use unset CDPATH instead of making it empty.
961 1998-06-20 Karl Heuer <kwzh@gnu.org>
963 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
965 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
967 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
968 and default.el. Sort the results.
970 1998-05-31 Karl Heuer <kwzh@gnu.org>
972 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
975 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
977 * Makefile.in (install-arch-indep):
978 Don't alter site-lisp/subdirs.el if it exists.
980 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
982 * Makefile.in (install-arch-indep): Put `-' on commands to create
983 subdirs.el in site-lisp dirs.
985 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
987 * Makefile.in (install-arch-indep): Fix typo in previous change.
989 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
991 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
993 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
995 * Makefile.in (mkdir): Create the site-lisp dirs.
996 (install-arch-indep): Make site-lisp/subdirs files world-readable.
998 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
1000 * Makefile.in (INSTALL_INFO): New variable.
1001 (install-arch-indep): Don't replace the dir file if it already exists.
1002 Use the install-info program, via INSTALL_INFO, to add entries.
1003 Make the `info' subdir and the Info files world-readable.
1005 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
1007 * config.bat: Make sure the environment is large enough to support
1008 all the "set foo=bar" commands. Update pointers to DJGPP FTP
1011 1998-04-10 Karl Heuer <kwzh@gnu.org>
1013 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
1015 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1017 * configure.in: Add --with-gssapi to specify GSS-API
1018 authentication support for movemail.
1020 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
1022 * Makefile.in (install-arch-indep): Fix previous change.
1024 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1026 * Makefile.in (info): Run man in build dir, not srcdir.
1028 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
1030 * Makefile.in (install-arch-indep): Fix previous change.
1032 1998-03-23 Kenichi Handa <handa@etl.go.jp>
1034 * Makefile.in (top_distclean): Check the existence of `lock'
1037 1998-03-22 Richard Stallman <rms@gnu.org>
1039 * Makefile.in (install-arch-indep): Put special subdirs.el files
1040 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
1042 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
1044 * make-dist: Fix shell syntax in check for missing .el or .elc files.
1046 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
1048 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1049 (m68*-hp-hpux*): Handle versions 1X like 10.
1051 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
1053 * make-dist: PROBLEMS is now in etc, not top level dir.
1055 * Makefile.in (SOURCES): Delete PROBLEMS.
1057 1998-02-25 Richard Stallman <rms@gnu.org>
1059 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1061 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1063 1998-01-17 Richard Stallman <rms@gnu.org>
1065 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1067 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1069 * make-dist (tempparent): New option --no-check.
1071 * make-dist: Don't do anything with cpp directory.
1073 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1075 * configure.in (sparc-fujitsu-sysv4*): New target.
1077 1997-12-17 Andreas Schwab <schwab@gnu.org>
1079 * configure.in: Cache more tests. Add missing quotes around
1080 message with embedded comma.
1082 1997-12-04 Karl Heuer <kwzh@gnu.org>
1084 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1086 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1088 * make-dist: Changed the comment about `umask 0' to say `Don't
1089 restrict access to any files.'; previously it said `Don't protect
1090 any files', which may have implied that we think fascism is good.
1092 1997-11-24 Paul Eggert <eggert@twinsun.com>
1094 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1095 strftime needs the underlying host's strftime for locale dependent
1098 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1100 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1102 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1104 * config.bat: Configure the man subdirectory.
1106 1997-11-07 Paul Eggert <eggert@twinsun.com>
1108 * configure.in (AC_CHECK_LIB): Add -lintl.
1110 1997-11-07 Karl Heuer <kwzh@gnu.org>
1112 * make-dist (check for .elc files): Avoid bash-specific syntax.
1113 (check for overflow 14-char limit): Simplify.
1115 1997-11-07 Richard Stallman <rms@gnu.org>
1117 * Makefile.in (install): Move blessmail last.
1119 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1121 * configure.in (gettimeofday, one arg or two):
1122 Clarify messages by avoiding double negative.
1124 1997-09-30 Karl Eichwalder <ke@suse.de>
1126 * Makefile.in (install-arch-indep): install the widget info file.
1128 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1130 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1131 libraries in reverse order, so that libraries will appear in the
1132 correct dependency order on the link line (and so that the
1133 configure checks themselves will work properly when early
1134 libraries depend on later ones).
1136 1997-09-21 Erik Naggum <erik@naggum.no>
1138 * make-dist (making links to `src'): Keep timestamp on copied
1141 * make-delta: New script to produce delta distributions.
1143 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1145 * Version 20.2 released.
1147 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1149 * Version 20.1 released.
1151 * Makefile.in (install-leim): Depend on mkdir.
1152 (leim): Depend on src.
1154 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1156 * configure.in: Recognize alpha* instead of just alpha.
1158 1997-09-12 Paul Eggert <eggert@twinsun.com>
1160 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1162 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1164 * update-subdirs: Use rm -f.
1166 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1168 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1169 Ignore subdirs named Old.
1171 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1173 * configure.in: Add OpenBSD clause to set $machine.
1175 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1177 * make-dist: Recompile everything after updating various Lisp files.
1178 Recompile in leim as well as lisp.
1179 Check in leim as well as lisp for mismatched files and too-long names.
1181 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1183 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1185 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1187 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1188 before trying to copy anything from it.
1190 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1192 * Makefile.in (man/Makefile): New target.
1193 (tags): Define env var EMACS and run Makefile from build dir.
1195 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1197 * config.bat: If src/_gdbinit doesn't exist, try using
1198 src/.gdbinit to create it (for building on Windows 95).
1200 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1202 * Makefile.in (install-arch-indep):
1203 Discard extra data in tar | tar pipes.
1205 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1207 * configure.in (x_default_search_path): Corrected
1208 '${x_library}' to '${x_library}/X11'.
1210 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1212 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1214 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1216 * configure.in: Support auto-configuration of both Kerberos V4 and
1217 Kerberos V5 for movemail, including detection of V4 and V5 header
1218 files and libraries.
1220 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1222 * configure.in: Compute x_default_search_path
1223 and substitute into makefiles.
1225 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1227 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1229 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1231 1997-08-07 Erik Naggum <erik@naggum.no>
1233 * configure.in: Remove lockdir, it is no longer needed.
1234 * Makefile.in (mkdir): Don't create lockdir.
1235 (lockdir): Variable deleted.
1236 (paths-force): Don't operate on PATH_LOCK.
1238 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1240 * leim-Makefile.in (clean, distclean): New targets.
1242 * make-dist: Include leim/ChangeLog in leim distribution.
1244 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1246 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1248 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1250 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1252 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1254 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1256 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1258 * make-dist: Update leim/leim-list.el.
1259 Pass along value of $EMACS when updating lisp dir.
1261 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1263 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1264 prerequisite to the use of Doug Lea's malloc.
1266 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1268 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1270 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1272 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1274 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1276 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1278 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1281 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1283 * config.bat: Use `sed' instead of `cp', which might not be
1286 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1288 * Makefile.in (mostlyclean): Add cleaning leim directory.
1289 (clean, distclean, maintainer-clean): Likewise.
1291 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1293 * make-dist (bogosities): Check subdirs of `lisp' also.
1295 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1297 * make-dist (etc): Really avoid symlinks now.
1298 (lisp): Don't delete from subdirs the things we never copy.
1300 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1302 * Makefile.in (install-arch-indep): Correct the target name.
1303 The first letter `i' was dropped by the previous change of mine.
1305 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1307 * configure.in (leim/Makefile): Generate this.
1308 (*-sysv4.2uw*): Recognize new alternative.
1310 * leim-Makefile.in: Renamed from leim-Makefile.
1312 * make-dist: Set up real-leim subdirectory,
1313 with the real contents of leim; then move it to
1314 a separate top-level directory.
1316 * make-dist: Don't mention site-lisp, site-init, site-start
1317 or default, when listing files hat are not compiled and should be.
1319 * configure.in: Create src/config.stamp at the end.
1321 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1323 * Makefile.in (install-leim): Correct previous change.
1325 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1327 * Makefile.in (install-leim): New target.
1328 (install): Depend on install-leim.
1330 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1332 * Makefile.in (SUBDIR): Add leim.
1333 (SUBDIR_MAKEFILES): Add leim/Makefile.
1334 (leim/Makefile): New target.
1336 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1338 * leim-Makefile: New file.
1339 * make-dist: Initialize a `leim' subdirectory with that makefile.
1341 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1343 * configure.in (GNU_MALLOC_reason): Fix message text.
1345 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1347 * make-dist (lisp): Don't process subdirs that start with =.
1348 (etc): Copy symlinks, as in src.
1350 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1352 * configure.in (i*86-*-unixware*): New alternative.
1354 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1356 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1357 and touch it explicitly.
1359 * configure.in (mips-sony-newsos6*): New alternative.
1360 (mips-*-linux-gnu*): New alternative.
1361 (*-*-bsdi*): New alternative.
1362 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1364 1997-06-22 Dave Love <d.love@dl.ac.uk>
1366 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1368 (src/config.h): New target to re-configure if src/config.in
1371 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1373 * configure.in (shutdown): Check for `shutdown' function.
1375 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1377 * update-subdirs: Include the directory "language" in subdirs.
1379 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1381 * configure.in (m88k-dg-dgux4*): New alternative.
1382 (alpha-*-netbsd*): New alternative.
1383 (powerpcle-*-solaris2*): New alternative.
1385 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1387 * make-dist: Warn about .el files that are not compiled.
1389 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1391 * Makefile.in (dist): Don't run update-subdirs here,
1392 since make-dist now gets that done.
1394 * make-dist: Use the new `updates' target in lisp/Makefile.
1396 * make-dist: Use new non-file targets in lisp/Makefile.
1398 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1400 * make-dist: Handle all subdirs of `lisp' uniformly.
1401 Don't handle `term' and `language' specially.
1402 Clear out umask at the beginning.
1404 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1406 * make-dist: Use Make to update finder-inf.el and autoloads.
1407 Also update cus-load.el.
1409 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1411 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1412 in case it is desirable to disable the GNU malloc features with
1415 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1417 * configure.in (DOUG_LEA_MALLOC):
1418 Define if malloc_{get,set}_state exist.
1420 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1422 * make-dist: Make links for files under lisp/language.
1424 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1426 * update-subdirs: Exclude the directory "language" from subdirs.
1428 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1430 * configure.in: Check for rint and cbrt.
1432 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1434 * make-dist: Use $EMACS to say where to run Emacs.
1435 Add --no-update option.
1437 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1439 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1441 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1443 * make-dist (copying src): Check thoroughly for symlinks
1444 and copy them in all cases. Regularize the linking of *.in
1445 and *.opt and ChangeLog files.
1446 (copying lib-src): Likewise.
1447 Don't rm getdate.c or y.tab.*--they don't exist any more.
1449 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1451 * configure.in: Check for libmail, maillock.h and
1452 touchlock (for movemail).
1454 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1456 * configure.in (limits.h): Check for this file.
1458 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1460 * configure.in (rs6000-ibm-aix4.2): New alternative.
1461 (rs6000-ibm-aix4.0): New alternative.
1462 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1464 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1466 * configure.in: Recognize vax-*-netbsd*.
1468 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1470 * configure.in (locallisppath): Add leim directory.
1472 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1474 * config.bat: Make sure `mv' supports forward slashes and -f.
1476 1996-10-28 Christian Limpach <chris@nice.ch>
1478 * configure.in (hppa*-next-nextstep*): * added after hppa
1479 to accept hppa1.0 and hppa1.1.
1481 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1483 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1484 * configure.in (ld_switch_machine): Fix typo.
1486 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1488 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1489 from config.h and use them in $ac_link.
1491 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1493 * configure.in: Create a subdir named `lisp'.
1495 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1497 * configure.in: Check for getcwd.
1499 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1501 * configure.in: Check for termios.h. Check for setpgid.
1503 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1505 * configure.in: Check for setrlimit.
1507 1996-08-31 Paul Eggert <eggert@twinsun.com>
1509 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1511 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1513 * configure.in: Check for utimes.
1515 * configure.in: Check for com_err library, but only
1516 if --with-kerberos was used. Check for krb and des
1517 only if --with-kerberos.
1519 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1521 * Makefile.in (INSTALL_STRIP): New variable.
1522 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1523 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1525 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1527 * configure.in: Check for krb and des libraries.
1529 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1531 * configure.in (*-sunos4.1.[3-9]*noshare):
1532 Use sunos413, not sunos4-1-3.
1533 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1534 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1536 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1538 * Makefile.in (src/paths.h): Target deleted.
1539 (paths-force): Delete all dependencies on this target
1540 but don't delete the target.
1541 (install): Depend on `all'.
1542 (paths-force): Don't print a message.
1544 * configure.in: Generate src/paths.h here.
1546 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1548 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1549 New variables that affect linking only.
1550 (alpha-dec-osf*): Use those instead of previous change.
1552 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1554 * Makefile.in (install-arch-indep): Install info/messages.
1556 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1558 * Version 19.33 released.
1560 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1562 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1563 Fix previous change.
1565 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1567 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1570 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1572 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1573 and NON_GCC_TEST_OPTIONS.
1575 1996-08-06 Paul Eggert <eggert@twinsun.com>
1577 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1578 "TZ=..." in environ.
1580 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1582 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1584 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1586 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1587 the more general *-sunos4.1.[3-9]* clause.
1589 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1591 * Version 19.32 released.
1593 * configure.in (*-sco3.2v5*):
1594 Set OVERRIDE_CPPFLAG to a string of one space.
1595 Fix the code that uses OVERRIDE_CPPFLAG.
1597 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1599 * configure.in: Undo previous change.
1601 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1603 * config.sub: Use `pc', not `unknown', when canonicalizing
1604 the vendor for ...86.
1606 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1608 * configure.in: Check for termios.h header.
1610 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1612 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1614 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1616 * configure.in: Split bsdos2 and bsdos2-1.
1618 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1620 * config.sub: If last two words are not a recognized
1621 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1622 Make conversion of gnu/linux to linux-gnu really work.
1624 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1626 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1628 * configure.in (check for using Lucid widgets by default):
1629 Eliminate indentation that confuses some compilers.
1631 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1633 * config.sub: Convert linux and gnu/linux to linux-gnu.
1635 * make-dist: Don't update getdate.c.
1636 Ignore =... files when checking for too-long Lisp file names.
1638 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1640 * configure.in (euidaccess): Check for that, not for eaccess.
1642 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1644 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1646 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1648 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1650 * configure.in: Rename lignux to linux-gnu in configuration names.
1651 Use gnu-linux as the opsys value (s/ file name).
1652 Allow i686 just like i386, i486, i586.
1654 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1656 * configure.in (i*86-*-sco3.2v5): New alternative.
1657 (OVERRIDE_CPPFLAG): New variable.
1658 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1660 * configure.in: Specify vpath for .texi files.
1662 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1664 * configure.in: Always check for HAVE_X11R5.
1665 Separately decide whether to use a toolkit by default.
1667 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1669 * configure.in: If X11R5 is missing the Xaw headers,
1670 default to --with-x-toolkit=no.
1672 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1674 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1676 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1678 * Makefile.in (install-arch-indep): If cd etc makes output,
1679 don't treat that as part of the tar data.
1680 Check that ./lisp actually exists.
1682 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1684 * make-dist: Check for long file names.
1686 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1688 * Version 19.31 released.
1690 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1692 * configure.in: Recognize sparc-*-lignux.
1694 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1696 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1697 Don't include config.w95.
1699 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1701 * make-dist: Replace --no-clean-up and --no-tar options
1702 with --clean-up and --tar, so that the default is useful.
1704 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1706 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1707 if not, tell the user to rename it and abort.
1709 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1711 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1714 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1716 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1718 * make-dist (MANIFEST): Fix previous change.
1719 (msdos): Put mainmake.v2 into the dist.
1721 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1723 * make-dist: Exit if autoconf fails.
1725 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1727 * config.bat: Set djgpp-ver, and unset it at the end.
1728 Add a number of conditionals for DJGPP version 2.
1729 Rename label libsrc2 to libsrc3.
1730 Substitute for LDFLAGS in src/Makefile.
1731 Substitute for ALL_CFLAGS in lib-src/Makefile.
1733 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1735 * configure.in (ncurses): Check this after checking fns like strerror.
1737 1996-04-08 Erik Naggum <erik@naggum.no>
1739 * make-dist (MANIFEST): Don't include lines from =files.
1741 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1743 * make-dist: Don't put lisp/dired.todo in the dist.
1745 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1747 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1749 * configure.in (setlocale): Check for it.
1751 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1753 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1755 * configure.in: Use lignux instead of linux as value of opsys.
1757 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1759 * Makefile.in (install-strip): Fix whitespace.
1760 Get rid of continuation.
1762 * config.sub: Convert linux or gnu/linux to lignux.
1764 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1766 * configure.in: Accept lignux in configuration name.
1768 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1770 * Makefile.in (install-strip): New target.
1772 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1774 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1775 -f failed to do the job on Suns.
1777 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1779 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1781 * configure.in (linux/version.h): Check for this header.
1783 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1785 * configure.in: Remove -fno-builtin hackery from -lm check.
1787 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1789 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1792 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1794 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1796 * configure.in: Check for ncurses.
1798 1996-02-28 Paul Eggert <eggert@twinsun.com>
1800 * configure.in (LOCALTIME_CACHE):
1801 Also define if localtime mishandles unsetting TZ.
1802 This works around a localtime bug in mips-dec-ultrix.
1804 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1806 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1808 * configure.in: Improve messages about X versions.
1810 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1812 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1814 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1816 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1817 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1819 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1820 (install): Put install-arch-indep before install-arch-dep.
1822 1996-02-20 Dave Love <d.love@dl.ac.uk>
1824 * INSTALL: Clarify info about MS-DOS path handling.
1826 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1828 * Makefile.in (install-arch-indep): Install info/ccmode*.
1829 In previous change, protect against /bin/pwd returning null string.
1831 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1833 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1836 1996-02-01 Paul Eggert <eggert@twinsun.com>
1838 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1840 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1842 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1844 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1846 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1847 we delete everything distclean deletes.
1849 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1851 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1853 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1855 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1856 into LDFLAGS instead of into LIBS.
1858 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1860 * configure.in (HAVE_XMU): Fix typo in previous change.
1862 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1864 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1866 1996-01-10 Erik Naggum <erik@naggum.no>
1868 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1870 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1872 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1874 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1876 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1877 and use -lXt to link it.
1879 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1881 * configure.in (locallisppath): Put version-specific dir first.
1883 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1885 * configure.in (hppa-*-nextstep*): New alternative.
1886 (USE_X_TOOLKIT): By default, set this to "maybe";
1887 and change that later to LUCID or "no" according to X11 version.
1889 * make-dist: Recompile outdated .elc files and update all autoloads.
1891 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1893 * configure.in (locallisppath): Fix typo in last change: " -> '.
1895 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1897 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1899 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1901 * Makefile.in (install-arch-indep): Give all files read permission.
1903 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1905 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1906 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1908 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1910 * configure.in: Determine HAVE_X11R6.
1911 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1913 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1915 * configure.in: Just "solaris" now defaults to version 2.4.
1916 Add sunos4.1.n-noshare as alternative.
1918 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1920 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1922 1995-11-29 Erik Naggum <erik@naggum.no>
1924 * Makefile.in (install-arch-indep): Add missing backslash.
1926 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1928 * Makefile.in (install-arch-indep): Don't install
1929 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1931 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1933 * Makefile.in (install-arch-indep): Fix previous change.
1935 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1937 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1939 * Version 19.30 released.
1941 * make-dist (lisp): Exclude subdirs.el.
1943 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1945 * make-dist (etc): Delete *.orig and *.rej.
1947 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1949 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1951 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1953 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1955 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1957 * make-dist (nt): Rename install, readme, and todo to
1958 INSTALL, README, and TODO.
1960 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1962 * make-dist (lisp): Don't distribute site-start.
1964 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1966 * make-dist: Break the hard link on alloca.c.
1968 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1970 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1972 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1974 * make-dist (src, lib-src): Don't distribute Makefile.c.
1975 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1977 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1979 * Makefile.in (mkdir): Create man1dir, not mandir.
1980 (uninstall): Use man1dir, not mandir.
1982 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1984 * Makefile.in (man1dir): New variable.
1985 (install-arch-indep): Use man1dir.
1987 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1989 * make-dist: Create lisp/MANIFEST.
1991 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1993 * configure.in (m68k-*-linux*): New alternative.
1995 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1997 * make-dist: Use new names config.in, paths.in, and
1998 {src,lib-src}/Makefile.in.
2000 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2002 * configure.in: Don't bother checking for drem.
2004 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2006 * Makefile.in (distclean): Delete line with just a tab in it.
2007 (install-arch-indep): Delete spaces that precede tabs.
2008 Delete spurious `fi' left from previous change.
2009 (install): Supply `true' as command, to avoid null command.
2011 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2013 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
2015 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2017 * configure.in (powerpc-*-solaris2): New alternative.x
2019 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
2021 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
2022 of paths.h.tmp$$, to avoid going beyond 14 characters.
2024 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2026 * configure.in: Improve error msg for invalid --with-x-toolkit value.
2028 1995-09-06 Paul Eggert <eggert@twinsun.com>
2030 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
2031 if localtime caches TZ. Check for tzset.
2033 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2035 * config.bat: Simplify using new names file names src/makefile.in,
2036 config.in, paths.in. Change Echo commands not to use `.
2038 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2040 * Makefile.in (install-arch-indep): Always install the new dir file;
2041 rename the previous dir file to dir.bak or dir.old.
2043 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2045 * configure.in (RANLIB): Substitute this into makefiles.
2046 Set it specially on solaris; set it by default on other systems.
2048 * configure.in: Fix previous Alpha change.
2050 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2052 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2053 NON_GCC_TEST_OPTIONS.
2055 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2057 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2058 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2060 * configure.in (alpha-*-linux*): New configuration.
2062 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2064 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2065 (m68k-next-nextstep*): New alias for that.
2066 (i*86-*-nextstep*): Use nextstep.h.
2067 (sparc-*-nextstep*): New configuration.
2069 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2071 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2072 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2074 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2076 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2077 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2079 1995-07-18 Mike Long <mike.long@analog.com>
2081 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2083 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2085 * Makefile.in (src/paths.h, paths-force):
2086 Rename src/paths.h.in to src/paths.in.
2087 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2089 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2090 Use Makefile.c for intermediate file.
2091 Rename src/config.h.in to src/config.in.
2093 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2095 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2096 (mips-dec-ultrix4.[12]): New alternative for old versions.
2098 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2100 * make-dist: Don't break intra-tree links.
2102 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2104 * configure.in: Put back archlibdir initialization. Require
2105 autoconf 2.4.1 or later.
2107 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2109 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2110 (mips-mips-riscos5*): New alternative.
2112 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2114 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2116 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2118 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2119 (mandir, infodir, archlibdir): Initializations deleted.
2121 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2122 On hpux9shr, use hpux9shxr4.h.
2124 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2126 * configure.in: Added target mips-dec-mach_bsd4.3.
2127 * config.guess: Guess mips-dec-mach_bsd4.3.
2129 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2131 * Makefile.in (mkdir): Use symbolic chmod.
2133 1995-06-22 Paul Eggert <eggert@twinsun.com>
2135 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2136 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2138 1995-06-22 Paul Eggert <eggert@twinsun.com>
2140 * Makefile.in (SUBDIR_MAKEFILES):
2141 Add man/Makefile, so `make distclean' removes it.
2142 (top_distclean): Add config.log to the list of files to be removed.
2144 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2146 * Version 19.29 released.
2148 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2150 * configure.in: Fix the previous change to verify that the -b
2151 option really solves the problem.
2153 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2155 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2157 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2159 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2161 * configure.in: Report more clearly when there is no special
2162 dir to search for X includes or libraries.
2164 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2166 * configure.in: Check for -lpthreads, not -lpthread.
2168 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2170 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2172 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2174 * configure.in: Check for -lpthread.
2176 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2178 * Makefile.in (install-arch-indep): Install info files for mh-e.
2179 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2181 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2183 * configure.in (*-solaris2.5): New configuration.
2185 * make-dist: Copy new files config.nt and config.w95.
2187 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2189 * configure.in: Use x_includes, not x_libraries, for -I.
2190 Make bitmapdir a colon-separated list.
2192 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2194 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2196 * configure.in: Allow x_libraries and x_includes to be paths.
2198 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2200 * configure.in: Fix typo.
2202 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2204 * INSTALL: Clarify use of site-init.el.
2206 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2208 * configure.in: pass arg to sqrt.
2210 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2212 * make-dist: Fix May 6 change.
2214 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2216 * vpath.sed: Delete reference to ymakefile.
2218 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2220 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2223 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2225 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2227 * update-subdirs: Specify /bin/sh to run the script.
2229 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2231 * make-dist: Put src/makefile.nt in dist.
2233 * configure.in (i[345]86-*-bsdi2*): New configuration.
2234 (vax-dec-bsd386*): Deleted.
2236 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2238 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2239 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2240 instead of logb in -lm check.
2242 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2244 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2245 Use bsd4-3. Don't set NON_GNU_CPP.
2247 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2248 In nt. copy various different things, but not *.cmd.
2249 Fix the ln commands for the subdirs of nt.
2251 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2253 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2255 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2257 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2258 since that's what the header file expects.
2260 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2262 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2263 and 68040 based machines when choosing options for gnucc.
2265 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2267 * Makefile.in (top_distclean): Delete config.cache.
2269 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2271 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2273 * configure.in: Use m/ncr386.h.
2275 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2277 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2279 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2281 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2282 (man): Don't copy texindex.c and getopt.c; they're deleted.
2283 (etc): Omit `e'; it's a subdirectory.
2284 (etc/e): Use `../..', not `..', to reference top level.
2286 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2288 * Makefile.in (install-arch-indep, dist):
2289 look for `update-subdir' in $(srcdir).
2291 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2293 * make-dist: Include mkinstalldirs in distribution.
2295 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2297 * make-dist: Add missing close backquote.
2299 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2301 * make-dist: Don't distribute shortnames directory.
2303 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2305 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2307 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2309 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2311 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2313 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2315 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2317 * configure.in (mips-sgi-irix6): New configuration.
2319 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2321 * Makefile.in (maintainer-clean): Renamed from realclean.
2323 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2325 * configure.in: Create a .gdbinit that sources the real one, if
2326 using a different build directory.
2328 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2330 * configure.in: Check for sys/select.h.
2332 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2334 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2336 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2338 * configure.in: Handle isc 4.1 operating system.
2340 1994-12-10 Richard Stallman <rms@kepa>
2342 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2343 (rs6000-ibm-aix4*): New alternative.
2345 1994-12-06 Richard Stallman <rms@kepa>
2347 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2349 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2351 * configure.in: Don't try to make directories that are guaranteed
2354 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2356 * configure.in: Generate man/Makefile from man/Makefile.in.
2357 Create the man subdir.
2359 * Makefile.in (dvi): Run Make in our man subdir.
2361 * make-dist: Create subdir etc/e.
2363 Put man/Makefile.in in dist, instead of man/Makefile.
2365 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2367 * configure.in: Add --with-pop, --with-kerberos, and
2368 --with-hesiod for movemail.
2370 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2372 * configure.in (m68*-apollo*): Use s/domain.h.
2374 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2376 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2378 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2380 * configure.in: Don't add -I, -L, -R options for cc if their
2381 arguments would be empty.
2383 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2385 * configure.in (i860-intel-osf1*): New alternative.
2386 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2387 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2389 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2391 * configure.in: Make h_errno check not use nested functions.
2393 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2395 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2397 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2399 * Makefile.in (install-arch-indep): Avoid continued comment
2400 swallowing target line.
2402 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2404 * configure.in: Protect a character class with `changequote'.
2406 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2408 * configure.in: Accept `news' as a synonym for `newsos'.
2410 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2412 * Makefile.in: Don't rm files if cd fails.
2414 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2416 * make-dist: Put nt subdir and its subdirs in the dist.
2417 (lib-src): Put makefile.nt in the dist.
2418 (lisp): Put makefile.nt in the dist.
2420 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2422 * configure.in: Change a stray `[' to `test'.
2424 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2426 * configure.in: Adapt for Autoconf v2. Use the standard argument
2427 parser, host type canonicalizer, X11 finder, and message
2428 printing macros. Use the new macro names. Use `test' instead of `['.
2430 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2432 * configure.in: Check for getpagesize.
2434 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2436 * make-dist (msdos): Put sed* in the distribution.
2438 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2440 * config.bat: New option, `--with-x', for configuring Emacs
2441 for use with the X11 system DesqView/X.
2442 New option, `--no-debug', for compiling Emacs without debug
2443 information thus saving disk space.
2444 (src/config.h, src/paths.h): Use `update' (which is like
2445 `move-if-changed') to change the file.
2446 (src/config.h): When configuring for X11 perform extra changes.
2447 (src/makefile): When configuring for X11 perform extra changes.
2448 (lib-src): Remove temporary files.
2449 (): Check that `sed', `rm', `mv', and `gcc' are available.
2451 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2453 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2455 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2457 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2459 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2461 * configure.in (canonical): Substitute var into makefiles.
2462 (bitmapdir): Likewise.
2464 * Makefile.in (bitmapdir): New variable.
2465 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2467 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2469 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2471 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2472 * update-subdirs: New shell script.
2474 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2476 * Makefile.in (top_distclean): Don't rm build-install.
2477 (SOURCES): Delete build-install.in.
2479 * make-dist: Don't distribute build-ins.in.
2480 * build-ins.in: File deleted.
2482 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2484 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2486 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2488 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2490 * configure.in (libexecdir): Renamed from libdir. New default.
2491 (sharedstatedir): Renamed from statedir. New default.
2492 (datadir): New default.
2494 * make-dist: Don't distribute subdirs.el.
2496 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2498 * configure.in (eaccess): Check for it.
2500 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2502 * configure.in (mktime): Check for it.
2504 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2506 * configure.in (motif): Add support for usage and option checking.
2508 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2510 * configure.in (utimes): Check for it.
2512 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2514 * Makefile.in (install-arch-indep): Don't do mkdir here.
2516 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2518 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2519 riscix.h renamed to acorn.h.
2521 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2523 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2526 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2528 * configure.in: Remove trailing slashes from srcdir.
2530 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2532 * configure.in (i[345]86-sequent-ptx*): Handle
2534 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2536 * Makefile.in (paths-force): Depend on src/paths.h
2538 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2540 * configure.in (config_options): Save all arguments, not just some.
2542 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2544 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2546 * configure.in: Add AC_AIX.
2547 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2549 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2551 * configure.in (parsing options): Simplify sed command to delete -'s.
2553 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2555 * configure.in (config_options): New shell variable.
2556 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2558 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2560 * configure.in (alpha-dec-osf*): New target.
2562 * Makefile.in: Use just one FRC target.
2564 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2566 * Makefile.in (removenullpaths, paths-force):
2567 Use name paths.h.tmp$$, which depends on the pid.
2569 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2571 * Makefile.in (removenullpaths, paths-force):
2572 Put paths.h.tmp in top-level dir, not in src.
2574 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2576 * Version 19.27 released.
2578 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2580 * Version 19.26 released.
2582 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2584 * configure.in: Check for lrand48, not rand48.
2586 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2588 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2589 (powerpc-ibm-aix*): New aliases.
2591 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2593 * make-dist (src/m, src/s): Put *.inp in distribution.
2595 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2597 * configure.in: Accept i586 and i486 along with i386.
2599 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2601 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2602 even if CPP env var was set by the user.
2604 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2606 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2608 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2610 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2612 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2614 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2616 * configure.in: Check more specifically for i*86-sun-sunos.
2618 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2620 * configure.in: Handle solaris 2.4.
2622 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2624 * configure.in (rand48): Check for it.
2626 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2628 * make-dist: Update the info files.
2630 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2632 * configure.in: Make "checking..." messages' style consistent.
2633 (HAVE_H_ERRNO): New test.
2635 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2637 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2639 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2641 * configure.in (CFLAGS): If the envvar was specified, use that.
2642 And set REAL_CFLAGS from it too.
2644 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2646 * make-dist: Update finder-inf.el.
2648 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2650 * make-dist (msdos): Include sed4.inp in dist.
2652 * Makefile.in (libsrc_libs): Var deleted.
2654 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2656 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2658 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2660 * configure.in (mips-sony-newsos4*): New alias.
2662 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2664 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2665 (*-convex-convexos*): Accept this as alias.
2667 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2669 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2670 for two different uses.
2672 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2674 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2676 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2678 * make-dist: Put ./BUGS into the distrib.
2680 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2682 * configure.in: Handle 386 running Solaris 2.
2684 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2686 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2688 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2690 * configure.in (mips-sony-newsos*): Use news-risc.h.
2692 * configure.in: Accept bsdi as opsys, like bsd386.
2694 1994-06-01 Morten Welinder (terra@diku.dk)
2696 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2698 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2700 * Version 19.25 released.
2702 * make-dist (shortversion): Don't assume another period follows.
2704 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2706 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2707 (uninstall): Use /bin/pwd.
2709 * Makefile.in (blessmail): Depend on src.
2710 (all): Don't depend on blessmail.
2712 * Makefile.in (src/paths.h): Don't force recomputation.
2713 (paths-force): New target; force recomputation of paths.h.
2714 (all): Depend on paths-force.
2715 (src, lib-src): Depend on src/paths.h.
2717 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2718 NON_GCC_TEST_OPTIONS.
2720 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2722 * configure.in: Don't insist on subversions for irix.
2724 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2726 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2728 * configure.in (i[34]86-next-*): New alternative.
2730 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2732 * Version 19.24 released.
2734 * configure.in: New config hppa*-hp-hpux9shr*.
2736 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2738 * config.bat: Doc fix.
2740 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2742 * Makefile.in (mostlyclean, clean, distclean, realclean)
2743 (extraclean): Don't act on man subdir if it doesn't exist.
2745 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2747 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2748 Use them to set up CC.
2749 (*-sun-sunos4.1.3): Set them.
2751 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2753 * Makefile.in (lib-src): Don't depend on src/paths.h.
2755 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2757 * build-ins.in (copydests): Get rid of spurious `-'s.
2759 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2761 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2763 * Version 19.23 released.
2765 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2766 for the Xlib and Xt checks; then restore old CFLAGS.
2768 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2770 * configure.in (HAVE_X11XTR6): Add newline before #if.
2771 Add newline after #endif.
2773 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2775 * configure.in (HAVE_X11XTR6): Arrange to define it.
2777 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2779 * Makefile.in (install): Depend on blessmail.
2781 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2783 * configure.in (mips-siemens-sysv*): Put quotes around value
2786 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2788 * Makefile.in (TAGS): Use the makefile in src subdir.
2790 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2792 * configure.in (opsys): Recognize `gnu'.
2794 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2796 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2798 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2800 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2803 1994-05-08 Morten Welinder (terra@diku.dk)
2805 * config.bat: Forcibly remove "# " style comments from makefiles.
2807 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2809 * Makefile.in (uninstall): When processing lispdir and etcdir,
2810 do nothing unless it exists and is a directory.
2812 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2814 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2815 Merge code in from install-doc.
2816 (install-doc): Merge code back into install-arch-indep.
2817 (install-arch-dep): Don't depend on install-doc.
2819 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2821 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2823 * configure.in (making src/Makefile and lib-src/Makefile):
2824 Split off the autoconf substitutions and don't pass them thru cpp.
2825 (undefs): Use $canonical as well as $configuration.
2827 * make-dist: Distribute lisp/Makefile.
2829 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2830 Use lower case names for the s files.
2832 1994-05-03 Morten Welinder (terra@diku.dk)
2834 * config.bat: Added possibility for different file name
2835 transscriptions in lib-src.
2837 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2839 * Makefile.in (lib-src): Undo previous change.
2840 (blessmail): New target to run maybe-blessmail in lib-src.
2841 (all): Depend on blessmail.
2843 * Makefile.in (lib-src): Depend on src.
2845 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2847 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2848 (m88k-dg-dgux5.4R2): dgux5.4R2.
2850 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2852 * configure.in (window_system): Restore accidentally deleted code
2853 that uses AC_FIND_X.
2855 * make-dist: Distribute config.bat.
2857 1994-04-29 Morten Welinder (terra@diku.dk)
2859 * config.bat: Corrected the configuration of lib-src
2860 to keep up with configure. Add note about dos version 3
2861 or better needed (djgpp needs that). Add note explaining
2862 that either install in c:/emacs or edit the script.
2863 Don't change to c:/emacs, but assume we're there (to minimize
2864 the number of places to change).
2866 * config.bat: Build-in the first step towards X11 support with
2867 the X11 emulator that exists. At this time it won't work,
2868 and several files are missing.
2870 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2872 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2873 Don't look for -lresolv.
2875 * Makefile.in (lib-src): Depend on src/paths.h.
2877 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2879 * configure.in: Restore deleted AC_SUBST of `configuration'.
2880 Improve error message for bad --with-x-toolkit value.
2882 * configure.in: Define CONFIGURATION in src/config.h
2883 rather than substituting in src/Makefile.in.
2885 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2887 * Makefile.in (install-doc): New target.
2888 (install-arch-dep): Depend on install-doc.
2889 (mkdir): Create docdir.
2891 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2893 * configure.in: Test for libresolv.a.
2894 Substitute machfile and opsysfile.
2896 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2898 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2899 (install-arch-dep): Install under the name $(EMACS).
2901 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2903 * configure.in (version): Use entire value of emacs-version.
2904 (mips-siemens-sysv*): New alternative.
2906 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2908 * Makefile.in (install-arch-indep): Don't install dired-x*.
2910 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2912 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2913 Fix definition of $undefs.
2915 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2917 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2919 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2921 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2923 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2925 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2927 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2928 and run it thru cpp, as with src/Makefile.in.
2930 * configure.in: Use AC_SET_MAKE.
2932 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2934 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2936 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2938 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2940 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2941 (printing the choices): Make the toolkit message unconditional.
2942 (USE_X_TOOLKIT): Use `none', not `no', if none.
2943 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2944 Get rid of temp file foofoo1.
2946 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2948 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2950 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2952 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2953 (printing the choices): State choice of toolkit.
2954 (libsrc_libs): Recalculate after writing config.h;
2955 then update lib-src/Makefile.
2957 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2959 * configure.in: Add sunos4shr as alternative for suns.
2960 Conditionals testing for null $CC were backwards.
2962 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2964 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2966 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2968 * configure.in: Handle -isc4.0*.
2970 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2972 * configure.in (esix5): Set NON_GNU_CPP.
2974 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
2976 * Makefile.in (thisdir): Nonsensical variable removed.
2977 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2978 back to $thisdir, rather than the directory `this_dir'.
2980 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2982 * Makefile.in (install-arch-indep): Add missing backslash after a
2985 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2987 * Makefile.in (thisdir): New variable.
2988 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2990 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2992 * configure.in: Add freebsd.
2994 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2996 * configure.in: Check for fpathconf.
2998 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3000 * configure.in (with_x_toolkit): Fix typo in previous change.
3002 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3004 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
3006 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3008 * configure.in (with_x_toolkit): Don't allow motif or open-look.
3010 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3012 * configure.in: Fix value of docdir.
3013 * Makefile.in (install-arch-indep): Install DOC* in docdir.
3015 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3017 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
3019 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
3021 * configure.in: New variable docdir to control where the docstring
3023 Makefile.in: Use it to initialize PATH_DOC in paths.h.
3025 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3027 * configure.in: When --run-in-place, don't inherit archlibdir.
3029 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3031 * Makefile.in (install-arch-dep, install-arch-indep):
3032 New targets split up former do-install rule.
3033 (do-install): Target deleted.
3035 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3037 * configure.in (mips-sony-newsos*): New configuration.
3039 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
3041 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
3043 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3045 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3047 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3049 * configure.in: Don't initialize CC.
3051 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3053 * configure.in (creating src/Makefile): Also generate -U switches
3054 for symbols in the $configuration value.
3056 * configure.in: Check for sys_siglist being declared in system header.
3058 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3060 * configure.in (creating src/Makefile): Delete blank lines
3061 along with lines of whitespace.
3062 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3064 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3066 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3067 like C_SWITCH_SYSTEM.
3068 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3070 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3072 * configure.in (drem): Check for this function.
3074 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3076 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3077 If CPP was inherited from environment, don't use NON_GNU_CPP.
3078 (NON_GNU_CC): Likewise.
3079 (handling with_gcc): Use explicit if in the `no' case.
3080 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3082 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3084 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3086 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3088 * configure.in: Check whether fmod exists.
3090 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3092 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3093 {src,lisp}/OChangeLog.
3095 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3097 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3098 necessary for proper operation. This code works with the current
3099 released version of Autoconf.
3101 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3103 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3104 (USE_X_TOOLKIT): Define it for all values except `no'.
3106 * configure.in: Undo first Jan 8 change and Jan 16 change.
3108 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3110 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3111 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3113 * Makefile.in (lwlib/Makefile): New target.
3114 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3115 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3116 (unlock, relock): Handle lwlib subdir.
3118 * Makefile.in: Add some .PHONY targets.
3120 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3122 * lwlib: New subdirectory.
3124 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3126 * configure.in: If CPP has a value that is a directory,
3129 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3131 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3134 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3136 * Makefile.in (do-install): Install the dired-x info files.
3138 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3141 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3143 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3145 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3147 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3148 AC_OUTPUT as it should be; hopefully noone will again see fit to
3149 gratuitously break this and not make a change log entry.
3150 Optimized sed processing of Makefile.in and cpp output; now
3151 preserves comments previously removed from the cpp input.
3152 Eliminated temp file for cpp output. Generate -U switches to
3153 undefine all identifiers that appear in the directory name
3154 ${srcdir}; pass these to cpp.
3156 * configure.in (version): Fix sed regexp to match two-elt version
3159 * configure.in: Check for strerror.
3161 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3163 * configure.in: Test for bcmp.
3165 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3167 * make-dist (tempdir): Put subdir msdos into the distribution.
3169 1993-01-07 Morten Welinder (terra@diku.dk)
3171 * config.bat: New file.
3173 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3175 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3177 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3179 * configure.in (m68*-next-*): Don't care about which os is specified.
3180 (i[34]86-*-*): Check for *-nextstop*.
3182 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3184 * configure.in: Check for setsid.
3186 1993-12-17 Richard Stallman (rms@srarc2)
3188 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3190 1993-12-15 Richard Stallman (rms@srarc2)
3192 * Makefile.in (mkdir): Make only the lockdir writable.
3194 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3196 1993-12-11 Richard Stallman (rms@srarc2)
3198 * Makefile.in (libdir): Use @libdir@.
3200 1993-12-08 Richard Stallman (rms@srarc2)
3202 * Makefile.in (install): Add empty command.
3204 1993-12-04 Richard Stallman (rms@srarc2)
3206 * make-dist: Put man/getopt.c in the dist.
3208 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3210 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3212 1993-12-03 Richard Stallman (rms@srarc2)
3214 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3215 Set it for all solaris versions.
3216 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3217 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3218 Likewise for NON_GNU_CC and CC.
3220 1993-12-01 Richard Stallman (rms@srarc2)
3222 * configure.in (mips-mips-riscos4*): Assign variable CC.
3223 (checking ${with_gcc}): If "no", don't override CC if already set.
3224 (CC): Initialize it as empty.
3226 1993-11-30 Richard Stallman (rms at srarc2)
3228 * configure.in (Suns): Set CPP if *-solaris2.3*.
3230 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3232 * Version 19.22 released.
3234 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3236 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3238 * make-dist: When breaking links, use cp -p.
3239 Copy install.sh into distribution.
3240 Move the temp dir up into the parent dir;
3241 don't leave the staging dir make-dist.tmp... in existence.
3242 * install.sh: New file.
3244 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3246 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3248 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3250 * configure.in (version): When --run-in-place, exclude
3251 ${datadir}/emacs/site-lisp from locallisppath.
3253 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3255 * configure.in: Delete jumk.c before writing it.
3257 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3259 * Version 19.21 released.
3261 * Makefile.in (mkdir): Ignore error from chmod.
3263 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3265 * make-dist: Don't put lisp/forms.README in the distribution.
3267 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3269 * configure.in (creating src/Makefile): Before running cpp,
3270 discard all lines that start with `# Generated' or /**/#.
3272 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3274 * Version 19.20 released.
3276 * make-dist: Use build-ins.in, not build-install.in.
3277 Don't bother updating TAGS since it's not included.
3279 * build-ins.in: Renamed from build-install.in.
3281 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3283 * make-dist: Don't try to link *.texinfo--there are none now.
3284 When running make in lib-src, specify YACC var value.
3286 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3288 * configure.in (extrasub): Add vpath patterns for %.[yls].
3290 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3291 Instead just include the commands to make src/Makefile as the
3292 second arg to AC_OUTPUT.
3294 * configure.in: Use : instead of dnl for comment inside
3297 * configure.in: No longer use vpath_sed. Instead, when we notice
3298 srcdir already configured, set extrasub to hack vpath in the
3301 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3303 * Makefile.in (VPATH): Define to @srcdir@.
3305 1993-09-28 Brian Fox (bfox@cubit)
3307 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3308 doesn't exist. Just copy src/Makefile.in instead. Touch
3309 all of the Makefiles after editing config.status.
3311 * INSTALL: Update documentation to match new configuration
3314 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3316 * configure.in: Allow any of the path or directory Makefile
3317 variables to be set with flags to configure. Create all Makefiles
3318 at configure time. Edit special commands into config.status after
3319 src/Makefile.in is built from src/Makefile.
3321 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3322 If these files are out of date, simply have config.status
3323 rebuild them; don't rebuild them explicitly.
3325 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3327 * build-install.in: Change src/xemacs to src/emacs. We no longer
3328 create src/xemacs, so the file wouldn't be found.
3330 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3332 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3334 * configure.in: Avoid forcing the search of /usr/include before
3335 fixed include files by resetting C_SWITCH_X_SITE if it is
3338 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3340 * Makefile.in (@rip_paths@locallisppath):
3341 Delete ${datadir}/emacs/site-lisp.
3343 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3346 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3347 Remove ${extra_output} from AC_OUTPUT call.
3349 1993-09-17 Brian Fox (bfox@inferno)
3351 * make-dist: Quote backquotes found in strings to be echoed.
3353 * configure.in: Use "sh -c pwd" when we want to avoid having the
3354 shell fix up the value of $PWD.
3356 1993-09-13 Brian Fox (bfox@inferno)
3358 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3359 of the installation fail. Suggested by Karl Berry.
3361 1993-08-30 Brian Fox (bfox@inferno)
3363 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3364 was used. Set MAKEFLAGS from MFLAGS.
3366 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3368 * configure.in: Test for res_init in libc.
3370 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3372 * configure.in: In the file ${tempcname}, use configure___
3373 instead of @configure@.
3375 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3377 * make-dist: Dist vpath.sed
3379 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3380 Depend on vpath.sed.
3381 Replace sed comand for VPATH with @vpath_sed@.
3383 * configure.in: Substitute variable `vpath_sed'.
3384 If not in $srcdir and $srcdir is configured,
3385 issue warning that GNU make is required,
3386 and set vpath_sed to use vpath.sed script.
3388 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3390 * configure.in: Remove check for $srcdir being configured. This
3391 pretty much works now.
3392 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3393 Check for XFree86 (/usr/X386/include) independent of whether
3396 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3397 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3400 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3402 * Version 19.19 released.
3404 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3406 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3408 * configure.in: Check for XScreenNumberOfScreen.
3410 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3412 * configure.in: Add * to end of all configuration alternatives.
3413 (m68*-sony-newsos3*): New alternative.
3415 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3417 * make-dist: Include getdate.c in distribution.
3419 * configure.in: For --help, use $PAGER if it is set.
3420 (LIB_X11_LIB): Default to -lX11.
3421 (mips-sgi-irix5.*): New alternative.
3423 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3425 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3426 Recognize *.B8.* as hpux version 8.
3427 (m68*-tektronix-bsd*): Fix typo in tek4300.
3428 (AC_HAVE_FUNCS): Add ftime.
3430 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3432 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3433 Use tekxd88, not tekXD88.
3435 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3437 * configure.in: Check for -lm. Then can check for frexp and logb.
3439 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3441 * Version 19.18 released.
3443 * make-dist (src): Don't put gnu-hp300 in dist.
3444 (src, lisp): Include OChangeLog in dist.
3446 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3448 * configure.in: Test for presence of logb and frexp functions.
3450 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3452 * configure.in (machine): Add i370-ibm-aix*.
3454 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3456 * configure.in (function checks): Test for mkdir and rmdir.
3458 * configure.in (function checks): Don't test for random and bcopy
3459 only when we're building with X; look for them all the time.
3461 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3463 * configure.in: Test for availability of bcopy functions, searching
3464 the X libraries if we're using X.
3466 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3467 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3468 versions of AIX, and needs to be passed to the loader.
3470 * configure.in: Test for the availablility of the
3471 XScreenResourceString function.
3473 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3475 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3476 LD_SWITCH_X_SITE and assume --with-x11.
3477 Only look for X11 files if we weren't told about a window system
3478 or if we were told to use X11 but not told where.
3479 Search the libraries from the s and/or m files when checking for
3482 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3484 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3486 * make-dist: Include lisp/dired.todo in the distribution.
3488 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3490 * configure.in: Add code to set HAVE_INET_SOCKETS.
3492 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3494 * configure.in: If we do find x_includes and x_libraries
3495 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3497 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3499 * make-dist: Include src/gnu-hp300 in the dist.
3501 * configure.in (canonical): New variable holds the canonicalized
3502 configuration. Don't alter `configuration'. Use `configuration'
3503 for Makefile.in for file naming.
3504 (testing x_includes and x_libraries): Use =, not ==.
3506 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3508 * Version 19.17 released.
3510 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3511 directory's makefile. This allows the invocation of CPP which
3512 builds xmakefile to receive these switches. The SunSoft C
3513 preprocessor inserts spaces between tokens if it doesn't get the
3514 -Xs flag requested in src/s/sol2.h.
3516 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3518 * configure.in (m68k-bull-sysv3): new config.
3520 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3522 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3523 the X Windows libraries.
3525 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3527 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3528 the distribution. Those files aren't kept in their own
3529 subdirectory any more.
3531 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3533 * Version 19.16 released.
3535 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3537 * configure.in: Add --verbose flag.
3539 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3541 * version 19.15 released.
3543 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3545 * Makefile.in (top_distclean): Use -f switch when cleaning out
3546 lock dir; it might be empty.
3548 * configure.in: Only check for -lXbsd once.
3550 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3552 * Version 19.14 released.
3554 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3556 * make-dist: If using gzip, create distribution with '.gz' extension.
3558 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3559 (lisp/forms-mode): This doesn't exist anymore.
3561 * configure.in: Look for the closedir function.
3563 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3565 * configure.in (CPP): Autoconf sets this to a shell variable
3566 reference, which doesn't work when it's edited into a makefile.
3567 Expand that variable reference.
3569 * Makefile.in (CPP): New variable.
3570 (src/Makefile): Edit CPP into src/Makefile.
3572 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3573 and entering double quotes to get the values of LD_SWITCH_X_SITE
3574 and the other make variables; make substitutes them in anyway.
3576 * Makefile.in (uninstall): Don't remove the lisp and etc
3577 directories if they're in the source tree.
3579 Bring mumbleclean targets into conformance with GNU coding standards.
3580 * Makefile.in (mostlyclean, clean): Separate these two; just have
3581 them pass the request to the subdirectory makefiles.
3582 (distclean): Pass the request down, and then get rid of the
3583 files configure built, and get rid of the Makefiles.
3584 (realclean): Pass the request down, and then do the same things
3586 (uninstall, info, dvi): New targets.
3588 * configure.in: Move clause for PC-compatible i386 box to the end
3589 of the case statement, to avoid masking configurations below.
3591 * configure.in: Add case for m88k-motorola-sysv4.
3593 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3594 the HP 68000 machines.
3596 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3597 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3598 preprocessor won't fiddle with them.
3600 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3602 * Makefile.in (TAGS): cd to src to run etags.
3604 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3606 * configure.in (version): Check the X libraries for XrmSetDatabase
3607 and random, and see if we have -lXbsd.
3609 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3611 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3612 s/*.h and m/*.h files. Martin Tomes
3613 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3615 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3617 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3618 above the general i386 alternative.
3620 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3622 * configure.in: Recognize configuration name for Data General
3625 * configure.in: Use AC_LONG_FILE_NAMES.
3627 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3629 * configure.in: Test for bison.
3630 * Makefile.in (YACC): New variable.
3631 (lib-src/Makefile.in): Edit YACC into the makefile.
3633 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3635 * Version 19.13 released.
3637 * configure.in (CFLAGS): Don't set this according to the value of
3638 the GCC shell variable. Instead, consult the machine and system
3639 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3640 test __GNUC__ while we're at it.
3642 * configure.in: Remove extra ;; from hpux cases.
3644 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3646 * configure.in: Check to see if the system has -ldnet.
3648 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3650 * make-dist: Add clauses to distribute lisp/forms-mode.
3652 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3654 * configure.in (machine): Fix the versions in hpux version number test.
3655 Do not guess based on cpu type. Do check for explicit system version.
3657 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3659 * configure.in: Do NOT look for `unknown' as company name.
3661 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3663 * configure.in: Fix typo in message.
3665 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3667 * Version 19.12 released.
3669 * Makefile.in (do-install): Correct previous etc-copying change.
3670 Partially rewrite using `if'.
3671 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3673 * Version 19.11 released.
3675 * configure.in: Handle 386bsd.
3677 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3679 * make-dist: Update getdate.c.
3681 * configure.in: Handle bsd386.
3683 * Makefile.in (do-install): Use `-' in tar options.
3685 * configure.in: Change ! "${...}" to x"${...}" = x.
3687 * Makefile.in (do-install): Copy the DOC-* files from the build
3688 etc directory, as well as lots of things from ${srcdir}/etc.
3690 * make-dist: Copy config.guess.
3692 * configure.in: Handle AIX versions 1.2, 1.3.
3694 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3696 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3697 the configuration name mips-mips-usg* to represent USG systems.
3699 * configure.in: Fix logic to detect if srcdir is already configured.
3701 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3703 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3704 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3705 of a directory; cd might fail, and have pwd print out the current
3708 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3710 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3712 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3714 * configure.in: Complain if srcdir points at an already-configured
3717 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3719 * Version 19.10 released.
3721 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3723 * Makefile.in: Use Makefile comments, not C comments.
3725 * configure.in: Add case for the Tektronix XD88.
3727 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3729 * configure.in: Handle sysv4.2 and sysvr4.2.
3731 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3733 * configure.in: Traverse the argument list without destroying it;
3734 don't use shift. It turns out that "set - ${saved_arguments}"
3735 doesn't work portably.
3737 * configure.in: Add missing "fi".
3739 * make-dist: Rebuild configure if configure.in is newer.
3741 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3742 targets to be executed even if make remembers that it has already
3745 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3747 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3749 * configure.in (romp): Handle various version numbers with aos and bsd.
3751 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3753 * configure.in: Fix message text.
3755 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3757 * make-dist: Make a `site-lisp' directory in the distribution,
3758 instead of a `local-lisp' directory, which hasn't been the
3759 appropriate name for a long time.
3760 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3761 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3763 * Makefile.in (do-install): Correctly detect if ./etc and
3764 ${srcdir}/etc are the same.
3766 * configure.in: Extract UNEXEC from the system configuration
3767 files, compute the name of the source file corresponding to the
3768 object file, and #define it as UNEXEC_SRC in config.h.
3770 * configure.in: If srcdir is '.', then try using PWD to make it
3773 * configure.in: Include ${srcdir} in the printed report, to help
3774 people notice if it's an automounter path.
3776 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3778 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3780 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3782 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3783 when they are different. Add `shift' command.
3784 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3785 (externallispdir): Var deleted.
3787 * configure.in: Delete spurious paren outputting short_usage.
3789 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3791 * Version 19.9 released.
3793 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3795 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3798 * make-dist: Check for .elc files with no corresponding .el file.
3800 * Makefile.in (mkdir): Make all the directories in locallisppath.
3802 * config.guess: New file.
3803 * configure.in: Use it, tentatively.
3804 * INSTNALL: Mention its usage.
3806 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3807 the former gives you the operating system rev directly. Use
3808 s/hpux.h if we don't recognize what we got.
3810 * Makefile.in (do-install): Don't remove a destination directory
3811 if it's the same as the source. If ${srcdir}/info == ${infodir},
3812 don't try to copy the info files.
3814 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3815 doesn't work if you're not using a separate source directory.
3816 (do-install): Copy the build tree's etc directory only after
3817 making sure it's not also the source tree's etc directory.
3819 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3821 * configure.in: Handle sunos4.1.3 specially.
3823 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3825 * Makefile.in (INSTALL): Add definition.
3827 * configure.in: Fix some messages. Support -with-gnu-cc.
3828 At the end, use `set --', not `set -'.
3829 Delete spurious `.h' in hpux alternatives.
3831 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3833 * Version 19.8 released.
3835 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3837 * configure.in: When looking for source in the same directory as
3838 the configure script, make the path thus discovered absolute.
3839 If the user specifies the `--srcdir' switch, make that directory
3842 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3844 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3845 too, as the value of the PATH_INFO macro.
3847 * configure.in: Check to see if the source lives in the same
3848 directory as the configure script.
3850 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3852 * Makefile.in (install): Split this into `install' and
3853 `do-install', to give people more control over exactly what gets
3855 (do-install): New target, containing the guts of `install'. Don't
3856 remove and recreate the directories inside the copying loop - do
3857 it all before the copying loop. Pass more flags to the lib-src
3859 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3860 avoid errors and warnings.
3862 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3863 the manufacturer - the more general case was blocking other i386
3864 configuration names below, and that's how the names are written in
3867 * make-dist: When breaking links, remove the link before moving
3868 the copy onto it, to avoid interactive behavior.
3870 * Makefile.in: Doc fix.
3872 * configure.in: Doc fix.
3874 * INSTALL: Mention --exec-prefix option.
3876 * configure.in: Add support for the `--exec-prefix' option.
3877 * Makefile.in: Accept that support.
3879 * configure.in: Use the AC_PROG_INSTALL macro.
3880 * Makefile.in (INSTALL): Variable removed.
3881 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3883 * configure.in: Distinguish between hp800's and hp700's by calling
3886 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3888 * configure.in: Recognize configuration names for i860 boxes
3891 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3893 * configure.in: Distinguish between hp800's and hp700's by the
3894 version of HP/UX they run, since that's something people are more
3895 likely to know - hp700's run 8.0.
3896 Add HP 700 configuration.
3898 * configure.in: Test for the presence of the `rename' function.
3900 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3902 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3904 * make-dist: Break intra-tree links.
3906 * configure.in: Explain that this is an autoconf script, and give
3907 instructions for rebuilding configure from it. Arrange to put
3908 comments in configure explaining this too.
3910 * configure.in: Make the first line of the configure script be
3911 "#!/bin/sh". Leaving the first line blank didn't work.
3913 * configure.in (long_usage): Removed; made short_usage describe
3914 the options briefly.
3916 * configure.in: Implement the --prefix option.
3917 * Makefile.in (prefix): Add support for it here.
3918 * INSTALL: Document it here.
3920 * Makefile.in (install): Don't assume that the files in the `info'
3921 subdirectory match *.info. They don't have that prefix.
3923 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3925 * configure.in: Add case for version 5 of Esix.
3927 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3929 * Version 19.7 released.
3931 * make-dist: There aren't any *.com files in lib-src anymore.
3933 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3934 them; they're symlinks to other filesystems on the GNU machines.
3936 * make-dist: Check that the manual reflects the same version of
3937 Emacs as stated in lisp/version.el. Edit that version number into
3940 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3942 * configure.in: Remove the hack of AC_DEFINE; use
3945 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3947 * make-dist: Don't distribute precomp.com, compile.com, or
3948 link.com from ./src; they're in ./vms now.
3950 Some time-handling patches from Paul Eggert:
3951 * configure.in: Add AC_TIMEZONE.
3953 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3955 * configure.in: Recognize Linux as a valid operating system for
3958 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3960 * make-dist: Distribute some VMS files we got from Richard Levitte.
3962 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3963 the source for the sed command, not oldXMenu/Makefile.
3965 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3967 * INSTALL: Don't claim the srcdir option doesn't work.
3969 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3971 * configure.in: Include remarks saying what order the autoconf
3972 tests should go in, and remind people to change config.h.in
3973 whenever they add autoconf tests which make #definitions.
3975 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3977 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3979 * Makefile.in (oldXMenu/Makefile): Make this depend on
3980 ${srcdir}/oldXMenu/Makefile.in, not itself.
3982 * PROBLEMS: Some updates from David J. Mackenzie.
3984 More changes from David J. Mackenzie.
3985 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3986 removed; autoconf and config.h should specify all these
3988 (buildlisppath): Make this path depend on ${srcdir}.
3989 (INSTALLFLAGS): Removed.
3990 (INSTALL): Include the -c flag.
3991 (install): Change the way we invoke install accordingly.
3993 Install ${srcdir} changes from DJM.
3994 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3996 (COPYDIR, COPYDESTS): Install files from both the etc directory in
3997 the source tree and the etc directory in the object tree.
3998 (${SUBDIR}): Pass the prefix variable down to submakes.
3999 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
4001 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
4002 values for srcdir and VPATH.
4003 (install): Add `v' flag to tar command. Make sure that `dir'
4004 exists in ${srcdir}/info before copying it. Remember that the man
4005 pages come from the source tree, not the object tree.
4006 * configure.in: Remove remarks saying that the --srcdir option
4008 Create the etc directory in the object tree.
4009 Recognize configuration names of the form *-sun-solaris*.
4010 Recognize sunos5 and solaris as operating system names.
4012 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
4013 lib-src/getdate.y and src/systime.h.
4015 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4017 * make-dist: Make links in info subdir.
4019 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4021 * configure.in: Call AC_STDC_HEADERS.
4023 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4025 * configure.in: Sidestep autoconf's quoting of the second argument
4026 of AC_DEFINE, so we can specify the value to put there. It would
4027 be nice if autoconf provided some way to specify computed values
4030 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4032 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
4033 this is always just -DHAVE_CONFIG_H.
4035 The GNU coding standards specify that CFLAGS should be left for
4037 * Makefile.in (CFLAGS): Let configure determine the default value
4039 have it default to DEFS.
4040 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
4041 (lib-src/Makefile, src/Makefile): Edit the default value for
4042 CFLAGS into these files, not DEFS.
4043 * configure.in (CFLAGS): Choose a default value for this - "-g"
4044 normally, or "-g -O" if we're using GCC. Edit it into the
4047 * configure.in: When scanning the machine and system description
4048 #include files, write their names to conftest.c properly.
4050 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4052 * configure.in: In configuration name case for Apallos running
4053 Domainios, set opsys, not opsysfile.
4055 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4056 src/config.h, instead of AC_OUTPUT; the latter overwrites
4057 src/config.h even when it hasn't changed, puts a makefile-style
4058 comment at the top even though it's C code, and produces a
4059 config.status script which doesn't do the job right.
4061 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4062 can use a symbolic link to get the X Menu library into src.
4063 * Makefile.in (LN_S): New variable.
4064 (src/Makefile): Edit the value of LN_S into this makefile.
4066 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4068 * configure.in: Support *-sco3.2v4* as opsystem.
4070 * make-dist: Don't include calc directory.
4071 Exclude many files in the man directory; copy a few.
4073 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4075 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4076 call AC_STRUCT_TM to see what's in time.h.
4078 * configure.in: Employ quoting stupidity to get the value of CPP
4081 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4083 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4084 variable to scan the machine and system description files.
4086 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4087 so that getdate.y builds correctly.
4089 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4091 * configure.in (tempcname): Change this to "conftest.c", so it will
4092 work properly on systems with short filenames; this is the name
4095 * configure.in: Also detect the availability of dup2 and
4098 * configure.in: Use the AC_ALLOCA test.
4099 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4100 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4102 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4104 * make-dist: Distribute configure, as well as configure.in.
4107 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4109 * Makefile.in (install): Print out the name of the directory we're
4110 copying, so people can have some idea of whether we're making
4113 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4114 Don't forget to re-create the COPYDESTS directories after we clear
4117 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4119 * Makefile.in: Add autoconf cookies so that the configure
4120 script can comment out sections of path variable definitions to
4121 choose between the installable configuration and the run-in-place
4123 * configure.in: Add new option `--run-in-place', to select the
4124 run-in-place path definitions.
4126 * configure.in: Add a clause to the big configuration name case
4127 for the NeXT machine.
4129 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4131 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4132 Make sure that each source directory exists, and is different from
4133 the destination directory; then, delete the destination before
4134 copying over the source.
4136 * make-dist: Distribute configure.in, instead of configure.
4138 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4140 * configure.in: Don't set CC to "gcc -O" if the user specifies
4141 `--with-gcc'. Add -O to DEFS if GCC is set.
4143 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4145 * Makefile.in (clean mostlyclean): Missing right paren.
4147 * configure.in: When checking for X windows, search for an X11
4148 subdirectory of ${x_includes}.
4150 * configure.in: Check for gettimeofday function, for getdate.y.
4152 Change `configure' to a mixture of custom code and autoconf stuff.
4153 autoconf can't derive all the information we need, but we'd really
4154 like to be able to take advantage of some of its tests, and its
4155 file-editing facilities.
4156 * configure.in: Renamed from configure.
4157 Quote the sections of shell script we want copied literally to
4158 the configure script.
4159 (compile): Initialize this to make the autoconf macros' code happy.
4160 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4161 code to do their jobs.
4162 Use autoconf to produce Makefile and src/config.h.
4163 Remove the Makefile-style comment that autoconf places at the top
4165 (config_h_opts): Removed - no longer necessary.
4166 * Makefile.in (configname): Renamed to configuration.
4167 (CONFIG_CFLAGS): Renamed to DEFS.
4168 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4169 get values via autoload @cookies@.
4170 (libsrc_libs): Get this from autoconf. We used to do nothing
4172 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4174 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4175 echo the move-if-change command.
4177 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4179 * make-dist: Distribute lib-src/rcs-checkin.
4181 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4182 Don't try to make links to the RCS or Old subdirectories.
4183 Use the appropriate extension for the compression type in use.
4184 Create the tar file in the shell's initial default directory, not
4186 Erase the whole ${tempparent} tree, not just ${tempdir}.
4188 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4190 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4191 use to build paths.h.
4192 (lib-src/Makefile, src/Makefile): Similarly.
4194 * configure: Extend test for working `const' keyword to handle AIX
4197 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4199 * make-dist: Distribute lisp/term/ChangeLog.
4201 Arrange for C compilation throughout the tree to get
4202 C_SWITCH_SYSTEM from the configuration files.
4203 * configure: Extract C_SWITCH_SYSTEM from the machine and
4204 system-dependent files, and save it in the top-level Makefile.
4205 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4206 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4208 * make-dist: Include the VMS support files in oldXMenu in the
4211 * configure: Doc fix.
4213 * configure: Fix corrupted config_h_opts.
4215 * configure: Properly report option names in error messages.
4217 * configure: Properly recognize --x-includes and --x-libraries
4220 * configure: Fix syntax errors in code handling XFree386.
4222 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4224 * configure: Add special code to detect XFree386, and tell
4227 * configure: Properly handle extracting values of LIBS_MACHINE and
4228 LIBS_SYSTEM that contain spaces.
4230 * configure: Add `--x-includes' and `--x-libraries' options. I
4231 think these are dopey, but no less than three alpha testers, at
4232 large sites, have said they have their X files installed in odd
4233 places. Implement them by setting C_SWITCH_X_SITE and
4234 LD_SWITCH_X_SITE in src/config.h.
4236 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4238 * make-dist: Don't distribute etc/Old files.
4240 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4243 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4245 * make-dist: Fix typo.
4247 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4249 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4250 in some cases where it should but didn't seen to.
4252 * Makefile.in: Added unlock and relock productions.
4254 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4256 * make-dist: Add a --compress option to force make-dist to use
4259 * make-dist: Use gzip, if we can find it.
4261 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4262 make rs6000-ibm-aix default to -aix32.
4264 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4266 * Makefile.in: Added `Developer's configuration' section.
4268 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4270 * Makefile.in: Add commented-out variable settings for developer's
4273 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4275 * make-dist: Distribute `src/bitmaps' too.
4277 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4279 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4280 make rs6000-ibm-aix default to -aix32.
4282 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4284 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4286 * Makefile.in (install.sysv): Add a second `$' in front of
4287 `${dest}', so that the shell will expand it, instead of Make.
4289 * configure: When processing the name of the configure script,
4290 collapse `././' to `./', but leave a single `./' prefix alone.
4292 * configure: Doc fix.
4294 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4296 * configure: Handle isc3.0 correctly.
4298 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4300 * make-dist: Don't try to copy the COPYING notice into
4301 external-lisp; we're not distributing that directory any more.
4303 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4305 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4306 Remove CVS subdirectories from the installed directory trees, as
4307 well as RCS directories.
4309 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4311 * make-dist: Only copy gmalloc.c if we couldn't link it.
4312 Don't try to copy man/{README,Makefile} unless they actually exist.
4314 * Makefile.in (lisppath): Don't include externallispdir in this.
4315 We're not sure whether we're even going to distribute the
4318 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4320 * make-dist: Don't distribute the external-lisp directory anymore.
4321 * INSTALL: Remove all references to external-lisp.
4323 * configure: Detect whether the compiler supports `const'
4324 properly, and edit src/config.h accordingly.
4326 * configure: Tweak layout of final report.
4328 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4331 * Makefile.in (locallisppath): Make this default to
4332 ${datadir}/emacs/site-lisp, instead of
4333 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4334 the same thing, and local-lisp causes completion conflicts with
4336 (lisppath): Add ${externallispdir} to this.
4337 * INSTALL: Adjust installation directions.
4339 * Makefile.in (externallispdir): New variable, to say where to
4340 install the externally-maintained lisp files.
4341 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4343 * INSTALL: Describe external-lisp and the new externallispdir
4346 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4348 * configure (progname): New option `--with-gcc'. Make it clearer
4349 how we are trying to guess whether or not we have GCC.
4350 * INSTALL: Document the `--with-gcc' option, and improve
4351 description of `--with-x' options.
4353 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4355 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4356 ${infodir} from these variables; we have written out explicit code
4357 to install the info files.
4359 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4361 * make-dist: Don't distributed the RCS files in the etc directory.
4363 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4365 * Makefile.in: Some makes can't handle comments in the middle of
4366 commands; move them to before the whole rule.
4368 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4370 * README: Mention what Emacs is.
4372 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4374 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4375 Add `./cpp' and `./man' back into the distribution.
4377 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4379 * Makefile.in: Define MAKE, and use where appropriate.
4381 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4383 * make-dist: Remember that the authoritative COPYING notice is
4384 `etc/COPYING', not `../etc/COPYING'.
4386 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4388 * make-dist: Make sure that the COPYING notices in each directory
4389 are copies, not symlinks.
4391 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4393 * INSTALL: The build process produces an executable called `emacs'
4394 now. Change references.
4395 * Makefile.in: Adjust `install.mumble' targets to install
4396 `src/emacs', not `src/xemacs'.
4398 * configure: Start with a blank line; this keeps some old CSH's
4399 from thinking it's a CSH script. Most systems will just use
4400 /bin/sh to run it, which is what we're expecting; the only other
4401 shells which might try to interpret it themselves are probably
4404 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4406 * INSTALL: Improvements suggested by David Mackenzie.
4408 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4410 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4411 Don't try to copy the info files if there aren't any; the
4412 unexpanded globbing pattern disappoints `install'. Ignore the
4413 return status of that command.
4415 * INSTALL: Updated for new configuration arrangement.
4417 * configure: Don't make the top-level Makefile read-only - people
4418 may want to edit the values of the path variables.
4420 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4421 Install the info files in ${infodir}. Install the executable
4422 under both `emacs' and `emacs-VERSION'.
4424 * Makefile.in: Doc fix.
4426 * Makefile.in (exec_prefix): New variable, as per latest version
4427 of coding standards.
4428 (bindir, libdir): Use it, instead of `prefix'.
4429 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4431 * Makefile.in (mandir): Make the default value for this depend on
4434 * Makefile.in (datadir, statedir, libdir): Make these all default
4436 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4439 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4440 Install the etags and ctags man pages too.
4442 * Makefile.in (distclean): Don't delete backup files; that's the
4444 (extraclean): Like distclean, but deletes backup and autosave files.
4446 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4448 Make path specification conform to GNU coding standards.
4449 * configure (long_usage): Remove all traces of old arguments from
4450 usage messages, and document the options we do accept in more
4451 detail: -with-x... and --srcdir.
4452 (options, boolean_opts): Deleted; we don't have enough options to
4453 make this worthwhile.
4454 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4455 along with the code which supported them; these should be set as
4456 arguments to the top-level make.
4457 (config_h_opts): Since this no longer doubles as a list of option
4458 names, make them upper case; this simplifies the code which uses
4459 them to build the sed command to edit src/config.h. Change the
4460 code which sets them.
4461 (cc, g, O): Don't allow the user to set these using options; they
4462 should be specified using `CC=' and `CFLAGS=' arguments to the
4463 top-level make. Just choose reasonable default values for them,
4464 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4466 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4467 options; use them whenever the configuration files say they're
4469 Simplify the argument processing loop. Don't accept abbreviations
4470 for option names; these might conflict with other configuration
4471 options in the future.
4472 Add some support for the `--srcdir' option. Check for the sources
4473 in . and .. if `--srcdir' is omitted. If the directories we will
4474 compile in don't exist yet, create them under the current directory.
4475 Note that the rest of the build process doesn't really support
4477 Edit only the top Makefile. That should edit the others. Edit
4478 into the makefile: `version', from lisp/version.el, `configname'
4479 and `srcdir' from the configuration arguments, `CC' and
4480 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4481 the user's path, and LOADLIBES as gleaned from the system
4483 Simplify the report generated; it doesn't need to include any
4484 description of paths now.
4485 Make `config.status' exec configure instead of just calling it, so
4486 there's no harm in overwriting `config.status'.
4487 * Makefile.in (version, configname): New variables, used to choose
4488 the default values for datadir and libdir.
4489 Path variables rearranged into two clearer groups:
4490 - In the first group are the variables specified by the GNU coding
4491 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4492 manext, infodir, and srcdir).
4493 - In the second are the variables actually used for Emacs's paths
4494 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4495 archlibdir), which depend on the first category.
4496 datadir and libdir default to directories under
4497 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4499 etcdir and lispdir default to subdirectories of datadir.
4500 archlibdir defaults to libdir.
4501 The new installation tree is a bit deeper than it used to be, so
4502 use the new make-path program in lib-src to build them all.
4503 Always build a new src/paths.h.tmp and then move-if-change it to
4504 src/paths.h, to avoid unnecessary rebuilds while responding to the
4506 Remove all mention of arch-lib. Run utility commands from
4507 lib-src, and let the executables be copied into archlibdir when
4509 Add targets for src/Makefile, lib-src/Makefile, and
4510 oldXMenu/Makefile, editing the values of the path variables into
4512 Let lib-src do its own installation.
4513 (datadir): Default to putting data files under
4514 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4515 (emacsdir): Variable deleted; it would only be confusing to use.
4516 (lispdir, etcdir): Default to ${datadir}/lisp.
4517 (mkdir): Use make-path for this.
4518 (lockdir): Do this in mkdir.
4519 (Makefile): New target.
4521 * configure (usage_message): Rename to long_usage.
4523 * make-dist: Don't bother creating an arch-lib directory; that's
4524 only for installation now.
4526 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4528 * configure: Use GCC-style configuration names, using config.sub.
4529 Change the usage and help messages.
4531 * configure: Initialize window_system, not indow_system.
4533 * configure: Report which window system, compiler, and signal
4534 handler return type we decide to use.
4536 * make-dist: Explain what's going on if config.sub and gmalloc.c
4537 can't be linked. Place the code which copies them near the code
4538 which links the rest of the files around them.
4540 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4542 * make-dist: Don't bother to distribute src/*.com, or
4543 src/vmsbuild; those have all been moved to `../vms'.
4545 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4547 * make-dist: Don't forget that the way to avoid filenames starting
4548 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4549 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4550 couldn't make hard links to, since we have two already, and
4551 perhaps more to come.
4553 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4555 * configure: When editing parameters into lib-src/Makefile, change
4556 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4557 needs some other flags too.
4559 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4561 * configure: Remove spurious echo of the configuration name.
4563 * make-dist: Don't distribute files in src/m and src/s whose names
4566 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4568 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4569 Also LISP_FLOAT_TYPE.
4571 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4573 * make-dist: Copy config.sub, since it's a symbolic link to a file
4574 on another file system.
4576 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4578 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4581 * config.sub: New file, to help us recognize configuration names.
4582 * make-dist: Include it in the distribution.
4584 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4586 * configure: Convert `-' to `_' in specified option names.
4587 Accept options with --. Delete --highpri and --have-x-menu options.
4588 New options --with-x and --with-x10 replace -window-system.
4589 Don't mention options --gnu-malloc, --rel-alloc
4590 or --lisp-float-type in help message.
4592 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4594 * make-dist: Include the `vms' subdirectory in the distribution.
4596 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4598 * configure: Remove lines starting with "# DIST: " when building
4599 lib-src/Makefile and src/Makefile. This allows us to mark the
4600 "Makefile.in" files with explanatory comments which won't also get
4601 stuck in the Makefiles.
4603 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4605 * make-dist: Don't use the '+' operator in the sed regular
4606 expression that extracts the version number from lisp/version.el;
4607 Ultrix sed doesn't seem support the operator. Just double the
4610 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4612 * Makefile.in: Doc fix.
4614 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4616 * configure: Rewrite sed command to remove at most one ./ prefix;
4617 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4620 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4622 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4624 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4626 * make-dist: Go ahead and build a new TAGS file, unless the
4627 --newer option was specified. Don't try to delete a TAGS file
4628 from etc; it's not kept there, and shouldn't be deleted anyway.
4630 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4632 * make-dist: If the lisp directory contains a default.el, don't
4635 * configure: When searching signal.h for the type of a signal
4636 return handler, make a copy of it, not a symbolic link to it; that
4637 way, it will work on systems that don't have symbolic links.
4639 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4641 * make-dist: taught it about vcdiff and rcs2log, added --newer
4642 option for generating incremental distributions. Stopped it from
4643 generating a TAGS file into the distribution; that sucker is
4644 *big*, and easily enough generated with the toplevel makefile.
4646 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4648 * configure: When writing config.status, don't prefix progname
4649 with a '.'; it might be absolute.
4651 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4653 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4654 /usr/include/X11 exist, not only if both exist.
4656 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4658 * make-dist: Make the new external-lisp directory a duplicate of
4659 the external-lisp directory, not the lisp directory.
4661 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4663 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4664 clean' in arch-lib; it doesn't even have a Makefile.
4666 * Makefile.in (clean, mostlyclean): In the test which tries to
4667 distinguish between the build directory, which should be cleaned,
4668 and the installed directory, which shouldn't, cd to `${emacsdir}',
4669 not `${DESTDIR}${LIBDIR}'.
4671 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4673 * make-dist: Be sure to delete the .c and .h files that YACC and
4674 BISON create from getdate.y.
4676 * external-lisp: New directory; see `external-lisp/README'.
4677 * make-dist: Added support for the external-lisp subdirectory.
4679 * make-dist: Changed message which complains that make-dist wasn't
4680 invoked in the right directory to indicate which files it was
4683 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4685 * configure: Add comments explaining why we can't translate
4686 character ranges or control characters in `tr'.
4688 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4690 * configure: When generating the configuration message, we used to
4691 build the message from the start so that each line began with "# "
4692 so that it would be a comment in `config.status'. However, this
4693 causes trouble if any of the variables we use in the message
4694 expand to more than one line of text - as gnu_malloc_reason
4695 sometimes does. So instead, we build the message as it should be
4696 printed to the user (i.e. without the "# " prefixes), and stick on
4697 the "# "s when we write it to `config.status'.
4699 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4700 `lib-src' and `arch-lib'.
4702 * configure: When generating report and `config.status' file, note
4703 that bindir only determines where `make install' and
4704 `build-install' will place the executables; this should make it
4705 clear that the ordinary build process will not try to install
4708 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4710 * make-dist: Change messages to say that we are 'making links to
4711 X', rather than 'copying X'. And put `' quotes around file names.
4713 * make-dist: Include '.tmp' in the name of the staging directory.
4715 * make-dist: Pass the `-f' option to rm when you're not sure that
4716 the files you're removing actually exist.
4718 * make-dist: When setting up etc/COPYING, always nuke whatever is
4719 there, and then copy it in, to make sure we get a real file.
4721 * make-dist: Don't try to distribute *.defns files any more. The
4722 only such file was for simula.el, which has been superceded by a
4723 version which doesn't have a separate .defns file.
4725 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4727 * make-dist: Don't distribute configured versions of config.h.in,
4728 paths.h.in, Makefile.in in src.
4730 * configure: Delete .tmp files before creating them; don't bother
4731 trying to make final targets writeable first, since it won't
4732 matter to move-if-change.
4734 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4736 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4737 mkdir and chmod in the center of all the conditionals. GNU Make
4738 will strip these out, but other makes won't.
4740 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4742 * make-dist: Include move-if-change in list of files to distribute.
4744 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4746 * configure: Remove any "." elements from the program name.
4748 * configure: Don't record the values of all the possible arguments
4749 in config.status; only record the options that the user specified.
4751 * configure: Use move-if-change to move in the new src/config.h.
4753 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4755 * move-if-change: New file, copied from gcc release.
4756 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4757 a temp file, so we don't update paths.h if an error occurs or if
4758 it doesn't need changing.
4760 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4762 * Makefile.in (src/paths.h): Do not install a value for the
4763 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4764 * build-install.in: Same thing.
4766 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4768 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4769 latter, being a typo, is always false, resulting in a program
4770 whose default behaviour is to painstakingly build a copy of the
4771 source tree, and then delete it. Rah.
4773 * Makefile.in: Add dist target, and comment for it.
4775 * configure: When scanning <signal.h> for a declaration for
4776 signal, create a symbolic link with a name ending in .c, so the
4777 compiler won't complain that it's only been given .h files.
4779 * configure: Check whether there are any arguments available
4780 before shifting to get the value of a non-boolean parameter.
4782 * make-dist: Doc fix.
4784 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4786 * configure: Instead of grepping /usr/include/signal.h for a
4787 signal declaration, run /usr/include/signal.h or
4788 /usr/include/sys/signal.h through cpp and grep for the
4791 * configure: Redirect the output of grep to /dev/null instead of
4792 using grep -s - that flag means different things on other systems.
4794 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4795 since the former is recognizable even if you don't know what
4797 * configure: Accomodate that change.
4799 * configure: Accept options for all of the directories you can
4800 change in the Makefile.
4802 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4804 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4805 FOO before you can use them.
4807 * build-install.in: Made the "Where To Install Things" section
4808 conform with the similar section from Makefile.in. Copied section
4809 which builds src/paths.h from src/paths.h.in from the Makefile.
4811 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4813 * configure: Write config.status to pass its command-line
4814 arguments on to configure, so that people can use it to recreate
4815 an old configuration, with minor changes.
4817 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4819 * configure: Don't rely on option variables being unset if their
4820 values are the empty string. In particular, when producing the
4821 English report, don't assume that highpri will be unset when no
4822 increased priority has been requested; -highpri='' should be the
4823 same as omitting -highpri altogether.
4825 * configure: Fix dumb bug: when running the system and machine
4826 description files through cpp, mark those lines that we want to
4827 evaluate with the string '@configure@', and then only evaluate
4828 them. This way if the files include anything that actually
4829 generates text (type definitions or external declarations, say),
4830 we won't try to eval it.
4832 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4834 * make-dist: New shell script.
4836 * configure: When creating foo from foo.in, make foo read-only to
4837 remind people to edit the .in file instead.
4839 * INSTALL: Changed references to config.h-dist to config.h.in.
4840 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4841 to build src/paths.h from src/paths.h.in; added a paragraph to do
4843 * configure, Makefile, build-install: Changed filenames like
4846 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4848 * Makefile, build-install: Renamed to Makefile.in and
4849 build-install.in; the configure script will edit these to produce
4850 the usable Makefile and build-install.
4851 * configure: Changed to produce ./Makefile, ./build-install,
4852 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4853 instead of editing them in place.
4855 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4857 * Makefile: Re-arranged so that the undumped Emacs will search
4858 ../lisp *after* the site's local elisp files.
4859 (locallisppath, dumplisppath): New variables.
4860 (lisppath): This variable's default value is now chosen based on
4861 $(locallisppath) and $(lispdir); while it used to be the
4862 customization point for adding site-local elisp directories to
4863 load-path, that job is now handled mostly by locallisppath.
4864 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4865 Check the values being assigned to the *LOADSEARCH macros for null
4866 path elements (like '::' in 'foo::bar').
4868 * configure: When checking if the machine- and system-dependent
4869 files define a particular macro or not, actually run them through
4870 CPP and test the macros with #ifs, instead of just grepping for
4871 the macros' names. In particular, check for SYSTEM_MALLOC in this
4874 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4876 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4878 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4880 * configure: Make the config.status file an executable shell
4881 script which will recreate the same configuration. Include the
4882 verbal description of the current configuration as a comment in
4886 * Makefile: brought the Makefile up to the GNU coding
4887 standards, as described in standards.text:
4888 (TAGS): New name for the target which rebuilds the tags table.
4889 (check): New target; doesn't do anything yet.
4890 (mostlyclean): New target, synonymous with clean.
4891 (realclean): New target. Currently, this just calls the
4892 subdirectories's makefiles and then deletes config.status.
4893 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4895 Installation directory variables changed to conform.
4896 (install, install.sysv, install.xenix, install.aix): Changed the
4897 code which copies the directories into their installed location to
4898 allow the installed locations to be in several different
4899 directories; the old version assumed that they would all be in
4901 (mkdir, lockdir): Allow the installed locations to be in several
4902 different directories.
4905 * build-install: Use the same variable names as the Makefile.
4906 Allow the installed locations to be in several different
4909 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4911 * Makefile (src/paths.h): Instead of using a single sed command to
4912 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4913 separately, and don't forget to append "/!!!SuperLock!!!" to the
4914 value of the PATH_SUPERLOCK macro.
4916 * config.emacs: Renamed to configure, for consistency with other
4917 GNU products. Internal references changed.
4918 INSTALL, Makefile: References changed.
4920 * lock: New directory, which should always be empty. If this
4921 directory doesn't exist, Emacs won't complain; it just won't lock.
4922 Having this here means that people can just unpack Emacs, build
4923 it, and have locking work.
4925 * share-lib: Re-renamed to etc, for the sake of tradition.
4926 * config.emacs: Changed default value for datadir to ../etc.
4927 * INSTALL, README: Adjusted.
4929 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4931 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4932 by running CPP on the appropriate s/*.h and m/*.h files.
4934 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4936 * config.emacs: Make sure to set the "exit on error" flag once
4937 we've removed config.status; errors should abort the configuration.
4939 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4941 * config.emacs: Added -distribute option, so that the Makefile
4942 paths are in their proper form. I don't know why this matters.
4944 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4946 * local-lisp: New directory, empty in the distribution, for people
4947 to put local elisp code in.
4948 * config.emacs: Include it in the default load path.
4949 * README: Document it.
4951 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4953 * config.emacs: Guess the type of signal handling functions based
4954 on the contents of /usr/include/signal.h.
4956 * config.emacs: Print out progress report messages.
4958 * Makefile (src/paths.h): Don't generically replace
4959 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4960 editing of the other entries, and each entry should be dealt with
4963 * build-install: Converted from C-shell to Bourne shell.
4964 * config.emacs: Edit build-install properly.
4966 * config.emacs: Doc fix.
4968 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4970 * Makefile (install): Remove `B' from tar xf command.
4972 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4974 * config.emacs: Removed support for the `maintain-environment'
4975 option; the only important difference between this and its absence
4977 * INSTALL: Removed mention of `maintain-environment'.
4979 * config.emacs: Fix arguments to sed when processing boolean
4982 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4984 * config.emacs: New file, to help automate the installation
4987 * Makefile: Lots of changes to support the separation of etc into
4988 architecture-dependent and -independent files:
4989 (EMACSROOT): New variable, giving the directory under which all of
4990 Emacs's libraries should be installed. Changed rest of file to
4992 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4993 (DATADIR): New variable, denoting architecture-independent dir.
4994 (LOCKDIR): New variable, for completeness.
4995 (SUBDIR): No more etc, new lib-src.
4996 (COPYDIR): No more etc, new arch-lib and share-lib.
4997 (src/paths.h): Set PATH_DATA and the LOCK macros too.
4998 (src): Now depends on lib-src, not etc.
4999 * build-install: Changes parallel to the above.
5000 * README: Describe the new arrangement.
5002 * vms: New subdirectory for all the VMS stuff.
5004 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
5006 * Makefile (LISPPATH): New variable.
5007 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
5009 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
5011 * Makefile (install, install.sysv, install.xenix):
5012 Install wakeup instead of loadst. No need for setuid or setgid.
5014 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5016 * Makefile (clean): Clean etc if that's not the installation dir.
5018 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5020 * Makefile (paths.h): Make sed alter each name in the path.
5022 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5024 * Makefile (install.sysv): Use cpio, not tar.
5026 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5028 * Makefile (lockdir): Rename `lock' target.
5029 Depend on it from install*, not from `all'.
5031 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
5033 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
5034 to match build-install and paths.h.
5037 ;; coding: iso-2022-7bit-unix
5040 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001
5041 Free Software Foundation, Inc.
5042 Copying and distribution of this file, with or without modification,
5043 are permitted provided the copyright notice and this notice are preserved.