configure1.in

   1 dnl This is an autoconf script.
   2 dnl To rebuild the `configure' script from this, execute the command
   3 dnl     autoconf
   4 dnl in the directory containing this script.
   5 [#!/bin/sh
   6 #### Configuration script for GNU Emacs
   7 #### Copyright (C) 1992, 1994 Free Software Foundation, Inc.
   8 #### This script requires autoconf version 1.9 or later.
   9
  10 ### Don't edit this script!
  11 ### This script was automatically generated by the `autoconf' program
  12 ### from the file `./configure.in'.
  13 ### To rebuild it, execute the command
  14 ###     autoconf
  15 ### in the this directory.
  16
  17 ### This file is part of GNU Emacs.
  18
  19 ### GNU Emacs is free software; you can redistribute it and/or modify
  20 ### it under the terms of the GNU General Public License as published by
  21 ### the Free Software Foundation; either version 2, or (at your option)
  22 ### any later version.
  23
  24 ### GNU Emacs is distributed in the hope that it will be useful,
  25 ### but WITHOUT ANY WARRANTY; without even the implied warranty of
  26 ### MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  27 ### GNU General Public License for more details.
  28
  29 ### You should have received a copy of the GNU General Public License
  30 ### along with GNU Emacs; see the file COPYING.  If not, write to
  31 ### the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  32
  33 ### Since Emacs has configuration requirements that autoconf can't
  34 ### meet, this file is an unholy marriage of custom-baked
  35 ### configuration code and autoconf macros.
  36 ###
  37 ### We use the m4 quoting characters [ ] (as established by the
  38 ### autoconf system) to include large sections of raw sewage - Oops, I
  39 ### mean, shell code - in the final configuration script.
  40 ###
  41 ### Usage: configure config_name
  42 ###
  43 ### If configure succeeds, it leaves its status in config.status.
  44 ### If configure fails after disturbing the status quo,
  45 ###     config.status is removed.
  46
  47 ### Remove any more than one leading "." element from the path name.
  48 ### If we don't remove them, then another "./" will be prepended to
  49 ### the file name each time we use config.status, and the program name
  50 ### will get larger and larger.  This wouldn't be a problem, except
  51 ### that since progname gets recorded in all the Makefiles this script
  52 ### produces, move-if-change thinks they're different when they're
  53 ### not.
  54 ###
  55 ### It would be nice if we could put the ./ in a \( \) group and then
  56 ### apply the * operator to that, so we remove as many leading ./././'s
  57 ### as are present, but some seds (like Ultrix's sed) don't allow you to
  58 ### apply * to a \( \) group.  Bleah.
  59 progname="`echo $0 | sed 's:^\./\./:\./:'`"
  60
  61
  62 ### Establish some default values.
  63 run_in_place=
  64 single_tree=
  65 prefix='/usr/local'
  66 exec_prefix='${prefix}'
  67 bindir='${exec_prefix}/bin'
  68 datadir='${prefix}/lib'
  69 statedir='${prefix}/lib'
  70 libdir='${exec_prefix}/lib'
  71 mandir='${prefix}/man/man1'
  72 infodir='${prefix}/info'
  73 lispdir='${datadir}/emacs/${version}/lisp'
  74 locallisppath='${datadir}/emacs/site-lisp'
  75 lisppath='${locallisppath}:${lispdir}'
  76 etcdir='${datadir}/emacs/${version}/etc'
  77 lockdir='${statedir}/emacs/lock'
  78 archlibdir='${libdir}/emacs/${version}/${configuration}'
  79 docdir='${datadir}/emacs/${version}/etc'
  80
  81 # On Sun systems, people sometimes set up the variable CPP
  82 # with a value that is a directory, not an executable at all.
  83 # Detect that case, and ignore that value.
  84 if [ "x$CPP" != x ] && [ -d "$CPP" ];
  85 then
  86   CPP=
  87 fi
  88
  89 # We cannot use this variable in the case statement below, because many
  90 # /bin/sh's have broken semantics for "case".  Unfortunately, you must
  91 # actually edit the clause itself.
  92 # path_options="prefix | exec_prefix | bindir | libdir | etcdir | datadir"
  93 # path_options="$path_options | archlibdir | statedir | mandir | infodir"
  94 # path_options="$path_options | lispdir | lockdir | lisppath | locallisppath"
  95
  96 #### Usage messages.
  97
  98 short_usage="Usage: ${progname} CONFIGURATION [-OPTION[=VALUE] ...]
  99
 100 Set compilation and installation parameters for GNU Emacs, and report.
 101 CONFIGURATION specifies the machine and operating system to build for.
 102 --with-x                Support the X Window System.
 103 --with-x=no             Don't support X.
 104 --with-x-toolkit        Use an X toolkit.
 105 --with-x-toolkit=no     Don't use an X toolkit.
 106 --with-gcc              Use GCC to compile Emacs.
 107 --with-gcc=no           Don't use GCC to compile Emacs.
 108 --x-includes=DIR        Search for X header files in DIR.
 109 --x-libraries=DIR       Search for X libraries in DIR.
 110 --run-in-place          Use libraries and data files directly out of the
 111                         source tree.
 112 --single-tree=DIR       Has the effect of creating a directory tree at DIR
 113                         which looks like:
 114                           .../DIR/bin/CONFIGNAME (emacs, etags, etc.)
 115                           .../DIR/bin/CONFIGNAME/etc (movemail, etc.)
 116                           .../DIR/common/lisp  (emacs' lisp files)
 117                           .../DIR/common/site-lisp (local lisp files)
 118                           .../DIR/common/lib (DOC, TUTORIAL, etc.)
 119                           .../DIR/common/lock (lockfiles)
 120 --srcdir=DIR            Look for the Emacs source files in DIR.
 121 --prefix=DIR            Install files below DIR. Defaults to \`${prefix}'.
 122
 123 You may also specify any of the \`path' variables found in Makefile.in,
 124 including --bindir, --libdir, --etcdir, --infodir, and so on.  This allows
 125 you to override a single default location when configuring.
 126
 127 If successful, ${progname} leaves its status in config.status.  If
 128 unsuccessful after disturbing the status quo, it removes config.status."
 129
 130
 131 #### Option processing.
 132
 133 ### Record all the arguments, so we can save them in config.status.
 134 arguments="$@"
 135
 136 ### Shell Magic: Quote the quoted arguments in ARGUMENTS.  At a later date,
 137 ### in order to get the arguments back in $@, we have to do an
 138 ###  `eval set x "$quoted_arguments"; shift'.
 139 quoted_arguments=
 140 for i in "$@"; do
 141    quoted_arguments="$quoted_arguments '$i'"
 142 done
 143
 144 ### Don't use shift -- that destroys the argument list, which autoconf needs
 145 ### to produce config.status.  It turns out that "set - ${arguments}" doesn't
 146 ### work portably.
 147 ### However, it also turns out that many shells cannot expand ${10} at all.
 148 ### So using an index variable doesn't work either.  It is possible to use
 149 ### some shell magic to make 'set x "$arguments"; shift' work portably.
 150 while [ $# != 0 ]; do
 151   arg="$1"; shift
 152   case "${arg}" in
 153
 154     ## Anything starting with a hyphen we assume is an option.
 155     -* )
 156       ## Separate the switch name from the value it's being given.
 157       case "${arg}" in
 158         -*=*)
 159           opt=`echo ${arg} | sed 's:^-*\([^=]*\)=.*$:\1:'`
 160           val=`echo ${arg} | sed 's:^-*[^=]*=\(.*\)$:\1:'`
 161           valomitted=no
 162         ;;
 163         -*)
 164           ## If FOO is a boolean argument, --FOO is equivalent to
 165           ## --FOO=yes.  Otherwise, the value comes from the next
 166           ## argument - see below.
 167           opt=`echo ${arg} | sed 's:^-*\(.*\)$:\1:'`
 168           val="yes"
 169           valomitted=yes
 170         ;;
 171       esac
 172
 173       ## Change `-' in the option name to `_'.
 174       optname="${opt}"
 175       opt="`echo ${opt} | tr - _`"
 176
 177       ## Process the option.
 178       case "${opt}" in
 179
 180         ## Has the user specified which window systems they want to support?
 181         "with_x" | "with_x11" | "with_x10" )
 182           ## Make sure the value given was either "yes" or "no".
 183           case "${val}" in
 184             y | ye | yes )      val=yes ;;
 185             n | no )            val=no  ;;
 186             * )
 187               (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value.
 188 Set it to either \`yes' or \`no'."
 189                echo "${short_usage}") >&2
 190               exit 1
 191             ;;
 192           esac
 193           eval "${opt}=\"${val}\""
 194         ;;
 195
 196         ## Has the user specified which toolkit they want to support?
 197         "with_x_toolkit" )
 198           case "${val}" in
 199             y | ye | yes )      val=athena ;;
 200             n | no )            val=no  ;;
 201             l | lu | luc | luci | lucid )       val=lucid ;;
 202             a | at | ath | athe | athena )      val=athena ;;
 203 # These don't currently work.
 204 #           m | mo | mot | moti | motif )       val=motif ;;
 205 #           o | op | ope | open | open- | open-l | open-lo \
 206 #               | open-loo | open-look )        val=open-look ;;
 207             * )
 208               (
 209 #echo "${progname}: the \`--${optname}' option is supposed to have a value
 210 #which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'."
 211 echo "${progname}: the \`--${optname}' option is supposed to have a value
 212 which is \`yes', \`no', \`lucid', or \`athena'.
 213 Currently, \`yes', \`athena' and \`lucid' are synonyms."
 214                echo "${short_usage}") >&2
 215               exit 1
 216             ;;
 217           esac
 218           eval "${opt}=\"${val}\""
 219         ;;
 220
 221         ## Has the user specified whether or not they want GCC?
 222         "with_gcc" | "with_gnu_cc" )
 223           ## Make sure the value given was either "yes" or "no".
 224           case "${val}" in
 225             y | ye | yes )      val=yes ;;
 226             n | no )            val=no  ;;
 227             * )
 228               (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value.
 229 Set it to either \`yes' or \`no'."
 230                echo "${short_usage}") >&2
 231               exit 1
 232             ;;
 233           esac
 234           eval "${opt}=\"${val}\""
 235         ;;
 236
 237         ## Has the user specified a source directory?
 238         "srcdir" )
 239           ## If the value was omitted, get it from the next argument.
 240           if [ "${valomitted}" = "yes" ]; then
 241             ## Get the next argument from the argument list, if there is one.
 242             if [ $# = 0 ]; then
 243               (echo "${progname}: You must give a value for the \`--${optname}' option, as in
 244     \`--${optname}=FOO'."
 245                echo "${short_usage}") >&2
 246               exit 1
 247             fi
 248             val="$1"; shift
 249           fi
 250           srcdir="${val}"
 251         ;;
 252
 253         ## Has the user tried to tell us where the X files are?
 254         ## I think these are dopey, but no less than three alpha
 255         ## testers, at large sites, have said they have their X files
 256         ## installed in odd places.
 257         "x_includes" )
 258           ## If the value was omitted, get it from the next argument.
 259           if [ "${valomitted}" = "yes" ]; then
 260             ## Get the next argument from the argument list, if there is one.
 261             if [ $# = 0 ]; then
 262               (echo "${progname}: You must give a value for the \`--${optname}' option, as in
 263     \`--${optname}=/usr/local/X11/include'."
 264                echo "${short_usage}") >&2
 265               exit 1
 266             fi
 267             val="$1"; shift
 268           fi
 269           x_includes="${val}"
 270         ;;
 271         "x_libraries" )
 272           ## If the value was omitted, get it from the next argument.
 273           if [ "${valomitted}" = "yes" ]; then
 274             ## Get the next argument from the argument list, if there is one.
 275             if [ $# = 0 ]; then
 276               (echo "${progname}: You must give a value for the \`--${optname}' option, as in
 277     \`--${optname}=/usr/local/X11/lib'."
 278                echo "${short_usage}") >&2
 279               exit 1
 280             fi
 281             val="$1"; shift
 282           fi
 283           x_libraries="${val}"
 284         ;;
 285
 286         ## Should this use the "development" file organization?
 287         "run_in_place" )
 288           single_tree=
 289           run_in_place=1
 290         ;;
 291
 292         ## Should this use the "single tree" file organization?
 293         "single_tree" )
 294            run_in_place=
 295            single_tree=1
 296         ;;
 297
 298         ## Has the user specified one of the path options?
 299         prefix | exec_prefix | bindir | libdir | etcdir | datadir | \
 300         archlibdir | statedir | mandir | infodir | lispdir | lockdir | \
 301         lisppath | locallisppath | docdir )
 302            ## If the value was omitted, get it from the next argument.
 303            if [ "${valomitted}" = "yes" ]; then
 304               if [ $# = 0 ]; then
 305                  (echo \
 306 "$progname: You must give a value for the \`--${optname}' option,";
 307                   echo \
 308 "as in \`--${optname}=`eval echo '$'$optname`.'"
 309                   echo "$short_usage") >&2
 310                  exit 1
 311               fi
 312               val="$1"; shift
 313            fi
 314            eval "${opt}=\"${val}\""
 315            eval "${opt}_specified=1"
 316         ;;
 317
 318         ## Verbose flag, tested by autoconf macros.
 319         "verbose" )
 320           verbose=yes
 321         ;;
 322
 323         ## Has the user asked for some help?
 324         "usage" | "help" )
 325           if [ "x$PAGER" = x ]
 326           then
 327             echo "${short_usage}" | more
 328           else
 329             echo "${short_usage}" | $PAGER
 330           fi
 331           exit
 332         ;;
 333
 334         ## We ignore all other options silently.
 335       esac
 336     ;;
 337
 338     ## Anything not starting with a hyphen we assume is a
 339     ## configuration name.
 340     *)
 341       configuration=${arg}
 342     ;;
 343
 344   esac
 345 done
 346
 347 ### Get the arguments back.  See the diatribe on Shell Magic above.
 348 eval set x "$quoted_arguments"; shift
 349
 350 if [ "${configuration}" = "" ]; then
 351   echo '- You did not tell me what kind of host system you want to configure.
 352 - I will attempt to guess the kind of system this is.' 1>&2
 353   guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
 354   if configuration=`${guesssys}` ; then
 355     echo "- Looks like this is a ${configuration}" 1>&2
 356   else
 357     echo '- Failed to guess the system type.  You need to tell me.' 1>&2
 358     echo "${short_usage}" >&2
 359     exit 1
 360   fi
 361 fi
 362
 363 #### Decide where the source is.
 364 case "${srcdir}" in
 365
 366   ## If it's not specified, see if  `.' or `..' might work.
 367   "" )
 368     confdir=`echo $0 | sed 's|//|/|' | sed 's|/[^/]*$||'`
 369     if [ -f $confdir/src/lisp.h -a -f $confdir/lisp/version.el ]; then
 370       srcdir="${confdir}"
 371     else
 372       if [ -f "./src/lisp.h" -a -f "./lisp/version.el" ]; then
 373         srcdir='.'
 374       else
 375         if [ -f "../src/lisp.h" -a -f "../lisp/version.el" ]; then
 376           srcdir='..'
 377         else
 378           (echo "\
 379 ${progname}: Neither the current directory nor its parent seem to
 380 contain the Emacs sources.  If you do not want to build Emacs in its
 381 source tree, you should run \`${progname}' in the directory in which
 382 you wish to build Emacs, using its \`--srcdir' option to say where the
 383 sources may be found."
 384             echo "${short_usage}") >&2
 385           exit 1
 386         fi
 387       fi
 388     fi
 389   ;;
 390
 391   ## Otherwise, check if the directory they specified is okay.
 392   * )
 393     if [ ! -d "${srcdir}" -o ! -f "${srcdir}/src/lisp.h" -o ! -f "${srcdir}/lisp/version.el" ]; then
 394       (echo "\
 395 ${progname}: The directory specified with the \`--srcdir' option,
 396 \`${srcdir}', doesn't seem to contain the Emacs sources.  You should
 397 either run the \`${progname}' script at the top of the Emacs source
 398 tree, or use the \`--srcdir' option to specify where the Emacs sources
 399 are."
 400        echo "${short_usage}") >&2
 401       exit 1
 402     fi
 403   ;;
 404 esac
 405
 406 #### Make srcdir absolute, if it isn't already.  It's important to
 407 #### avoid running the path through pwd unnecessary, since pwd can
 408 #### give you automounter prefixes, which can go away.
 409 case "${srcdir}" in
 410   /* ) ;;
 411   . )
 412     ## We may be able to use the $PWD environment variable to make this
 413     ## absolute.  But sometimes PWD is inaccurate.
 414     if [ "${PWD}" != "" ] && [ "`(cd ${PWD} ; sh -c pwd)`" = "`pwd`" ] ; then
 415       srcdir="$PWD"
 416     else
 417       srcdir="`(cd ${srcdir}; pwd)`"
 418     fi
 419   ;;
 420   *  ) srcdir="`(cd ${srcdir}; pwd)`" ;;
 421 esac
 422
 423 #### Check if the source directory already has a configured system in it.
 424 if [ `pwd` != `(cd ${srcdir} && pwd)` ] \
 425    && [ -f "${srcdir}/src/config.h" ] ; then
 426   (echo "${progname}: WARNING: The directory tree \`${srcdir}' is being used"
 427    echo "   as a build directory right now; it has been configured in its own"
 428    echo "   right.  To configure in another directory as well, you MUST"
 429    echo "   use GNU make.  If you do not have GNU make, then you must"
 430    echo "   now do \`make distclean' in ${srcdir},"
 431    echo "   and then run ${progname} again.") >&2
 432   extrasub='/^VPATH[     ]*=/c\
 433 vpath %.c $(srcdir)\
 434 vpath %.h $(srcdir)\
 435 vpath %.y $(srcdir)\
 436 vpath %.l $(srcdir)\
 437 vpath %.s $(srcdir)\
 438 vpath %.in $(srcdir)'
 439 fi
 440
 441 ### Make the necessary directories, if they don't exist.
 442 for dir in ./src ./lib-src ./cpp ./oldXMenu ./lwlib ./etc ; do
 443   if [ ! -d ${dir} ]; then
 444     mkdir ${dir}
 445   fi
 446 done
 447
 448 #### Given the configuration name, set machfile and opsysfile to the
 449 #### names of the m/*.h and s/*.h files we should use.
 450
 451 ### Canonicalize the configuration name.
 452 echo "Checking the configuration name"
 453 if canonical=`${srcdir}/config.sub "${configuration}"` ; then : ; else
 454   exit $?
 455 fi
 456
 457 ### If you add support for a new configuration, add code to this
 458 ### switch statement to recognize your configuration name and select
 459 ### the appropriate operating system and machine description files.
 460
 461 ### You would hope that you could choose an m/*.h file pretty much
 462 ### based on the machine portion of the configuration name, and an s-
 463 ### file based on the operating system portion.  However, it turns out
 464 ### that each m/*.h file is pretty manufacturer-specific - for
 465 ### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are
 466 ### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS
 467 ### machines.  So we basically have to have a special case for each
 468 ### configuration name.
 469 ###
 470 ### As far as handling version numbers on operating systems is
 471 ### concerned, make sure things will fail in a fixable way.  If
 472 ### /etc/MACHINES doesn't say anything about version numbers, be
 473 ### prepared to handle anything reasonably.  If version numbers
 474 ### matter, be sure /etc/MACHINES says something about it.
 475 ###
 476 ### Eric Raymond says we should accept strings like "sysvr4" to mean
 477 ### "System V Release 4"; he writes, "The old convention encouraged
 478 ### confusion between `system' and `release' levels'."
 479
 480 machine='' opsys='' unported='false'
 481 case "${canonical}" in
 482
 483   ## NetBSD ports
 484   *-*-netbsd* )
 485     opsys=netbsd
 486     case "${canonical}" in
 487       sparc-*-netbsd*)  machine=sparc ;;
 488       i386-*-netbsd*)   machine=intel386 ;;
 489       hp300-*-netbsd* | amiga-*-netbsd* | sun3-*-netbsd* | mac68k-*-netbsd* | da30-*-netbsd*)
 490                         # Yes, this is somewhat bogus.
 491                         machine=hp9000s300 ;;
 492       pc532-*-netbsd*)  machine=ns32000 ;;
 493       pmax-*-netbsd*)   machine=pmax ;;
 494     esac
 495   ;;
 496
 497   ## Alliant machines
 498   ## Strictly speaking, we need the version of the alliant operating
 499   ## system to choose the right machine file, but currently the
 500   ## configuration name doesn't tell us enough to choose the right
 501   ## one; we need to give alliants their own operating system name to
 502   ## do this right.  When someone cares, they can help us.
 503   fx80-alliant-* )
 504     machine=alliant4 opsys=bsd4-2
 505   ;;
 506   i860-alliant-* )
 507     machine=alliant-2800 opsys=bsd4-3
 508   ;;
 509
 510   ## Altos 3068
 511   m68*-altos-sysv* )
 512     machine=altos opsys=usg5-2
 513   ;;
 514
 515   ## Amdahl UTS
 516   580-amdahl-sysv* )
 517     machine=amdahl opsys=usg5-2-2
 518   ;;
 519
 520   ## Appallings - I mean, Apollos - running Domain
 521   m68*-apollo* )
 522     machine=apollo opsys=bsd4-2
 523   ;;
 524
 525   ## AT&T 3b2, 3b5, 3b15, 3b20
 526   we32k-att-sysv* )
 527     machine=att3b opsys=usg5-2-2
 528   ;;
 529
 530   ## AT&T 3b1 - The Mighty Unix PC!
 531   m68*-att-sysv* )
 532     machine=7300 opsys=usg5-2-2
 533   ;;
 534
 535   ## Bull dpx20
 536   rs6000-bull-bosx* )
 537     machine=ibmrs6000 opsys=aix3-2
 538   ;;
 539
 540   ## Bull dpx2
 541   m68*-bull-sysv3* )
 542     machine=dpx2 opsys=usg5-3
 543   ;;
 544
 545   ## Bull sps7
 546   m68*-bull-sysv2* )
 547     machine=sps7 opsys=usg5-2
 548   ;;
 549
 550   ## CCI 5/32, 6/32 -- see "Tahoe".
 551
 552   ## Celerity
 553   ## I don't know what configuration name to use for this; config.sub
 554   ## doesn't seem to know anything about it.  Hey, Celerity users, get
 555   ## in touch with us!
 556   celerity-celerity-bsd* )
 557     machine=celerity opsys=bsd4-2
 558   ;;
 559
 560   ## Clipper
 561   ## What operating systems does this chip run that Emacs has been
 562   ## tested on?
 563   clipper-* )
 564     machine=clipper
 565     ## We'll use the catch-all code at the bottom to guess the
 566     ## operating system.
 567   ;;
 568
 569   ## Convex
 570   *-convex-bsd* | *-convex-convexos* )
 571     machine=convex opsys=bsd4-3
 572     ## Prevents suprious white space in makefiles - d.m.cooke@larc.nasa.gov
 573     NON_GNU_CPP="cc -E -P"
 574   ;;
 575
 576   ## Cubix QBx/386
 577   i386-cubix-sysv* )
 578     machine=intel386 opsys=usg5-3
 579   ;;
 580
 581   ## Cydra 5
 582   cydra*-cydrome-sysv* )
 583     machine=cydra5 opsys=usg5-3
 584   ;;
 585
 586   ## Data General AViiON Machines
 587   m88k-dg-dgux5.4R3* | m88k-dg-dgux5.4.3* )
 588     machine=aviion opsys=dgux5-4r3
 589   ;;
 590   m88k-dg-dgux5.4R2* | m88k-dg-dgux5.4.2* )
 591     machine=aviion opsys=dgux5-4r2
 592   ;;
 593   m88k-dg-dgux* )
 594     machine=aviion opsys=dgux
 595   ;;
 596
 597   ## DECstations
 598   mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* )
 599     machine=pmax opsys=bsd4-2
 600   ;;
 601   mips-dec-ultrix* | mips-dec-bsd* )
 602     machine=pmax opsys=bsd4-3
 603   ;;
 604   mips-dec-osf* )
 605     machine=pmax opsys=osf1
 606   ;;
 607
 608   ## Motorola Delta machines
 609   m68k-motorola-sysv* | m68000-motorola-sysv* )
 610     machine=delta opsys=usg5-3
 611     if [ -z "`type gnucc | grep 'not found'`" ]
 612     then CC=gnucc
 613     else
 614       if [ -z "`type gcc | grep 'not found'`" ]
 615       then CC=gcc
 616       else CC=cc
 617       fi
 618     fi
 619   ;;
 620   m88k-motorola-sysv4* )
 621     machine=delta88k opsys=usg5-4
 622   ;;
 623   m88k-motorola-sysv* | m88k-motorola-m88kbcs* )
 624     machine=delta88k opsys=usg5-3
 625   ;;
 626
 627   ## Dual machines
 628   m68*-dual-sysv* )
 629     machine=dual opsys=usg5-2
 630   ;;
 631   m68*-dual-uniplus* )
 632     machine=dual opsys=unipl5-2
 633   ;;
 634
 635   ## Elxsi 6400
 636   elxsi-elxsi-sysv* )
 637     machine=elxsi opsys=usg5-2
 638   ;;
 639
 640   ## Encore machines
 641   ns16k-encore-bsd* )
 642     machine=ns16000 opsys=umax
 643   ;;
 644
 645   ## The GEC 93 - apparently, this port isn't really finished yet.
 646
 647   ## Gould Power Node and NP1
 648   pn-gould-bsd4.2* )
 649     machine=gould opsys=bsd4-2
 650   ;;
 651   pn-gould-bsd4.3* )
 652     machine=gould opsys=bsd4-3
 653   ;;
 654   np1-gould-bsd* )
 655     machine=gould-np1 opsys=bsd4-3
 656   ;;
 657
 658   ## Harris Night Hawk machines running CX/UX (a 5000 looks just like a 4000
 659   ## as far as Emacs is concerned).
 660   m88k-harris-cxux* )
 661     # Build needs to be different on 7.0 and later releases
 662     case "`uname -r`" in
 663        [56].[0-9] ) machine=nh4000 opsys=cxux ;;
 664        [7].[0-9] ) machine=nh4000 opsys=cxux7 ;;
 665     esac
 666   ;;
 667   ## Harris ecx or gcx running CX/UX (Series 1200, Series 3000)
 668   m68k-harris-cxux* )
 669     machine=nh3000 opsys=cxux
 670   ;;
 671
 672   ## Honeywell XPS100
 673   xps*-honeywell-sysv* )
 674     machine=xps100 opsys=usg5-2
 675   ;;
 676
 677   ## HP 9000 series 200 or 300
 678   m68*-hp-bsd* )
 679     machine=hp9000s300 opsys=bsd4-3
 680   ;;
 681   ## HP/UX 7, 8 and 9 are supported on these machines.
 682   m68*-hp-hpux* )
 683     case "`uname -r`" in
 684       ## Someone's system reports A.B8.05 for this.
 685       ## I wonder what other possibilities there are.
 686       *.B8.* ) machine=hp9000s300 opsys=hpux8 ;;
 687       *.08.* ) machine=hp9000s300 opsys=hpux8 ;;
 688       *.09.* ) machine=hp9000s300 opsys=hpux9 ;;
 689       *) machine=hp9000s300 opsys=hpux ;;
 690     esac
 691   ;;
 692
 693   ## HP 9000 series 700 and 800, running HP/UX
 694   hppa*-hp-hpux7* )
 695     machine=hp800 opsys=hpux
 696   ;;
 697   hppa*-hp-hpux8* )
 698     machine=hp800 opsys=hpux8
 699   ;;
 700   hppa*-hp-hpux9shr* )
 701     machine=hp800 opsys=hpux9shr
 702   ;;
 703   hppa*-hp-hpux9* )
 704     machine=hp800 opsys=hpux9
 705   ;;
 706
 707   ## HP 9000 series 700 and 800, running HP/UX
 708   hppa*-hp-hpux* )
 709     ## Cross-compilation?  Nah!
 710     case "`uname -r`" in
 711       ## Someone's system reports A.B8.05 for this.
 712       ## I wonder what other possibilities there are.
 713       *.B8.* ) machine=hp800 opsys=hpux8 ;;
 714       *.08.* ) machine=hp800 opsys=hpux8 ;;
 715       *.09.* ) machine=hp800 opsys=hpux9 ;;
 716       *) machine=hp800 opsys=hpux ;;
 717     esac
 718   ;;
 719
 720   ## Orion machines
 721   orion-orion-bsd* )
 722     machine=orion opsys=bsd4-2
 723   ;;
 724   clipper-orion-bsd* )
 725     machine=orion105 opsys=bsd4-2
 726   ;;
 727
 728   ## IBM machines
 729   i386-ibm-aix1.1* )
 730     machine=ibmps2-aix opsys=usg5-2-2
 731   ;;
 732   i386-ibm-aix1.[23]* | i386-ibm-aix* )
 733     machine=ibmps2-aix opsys=usg5-3
 734   ;;
 735   i370-ibm-aix*)
 736     machine=ibm370aix opsys=usg5-3
 737   ;;
 738   rs6000-ibm-aix3.1* )
 739     machine=ibmrs6000 opsys=aix3-1
 740   ;;
 741   rs6000-ibm-aix3.2.5)
 742     machine=ibmrs6000 opsys=aix3-2-5
 743   ;;
 744   rs6000-ibm-aix3.2* | rs6000-ibm-aix* )
 745     machine=ibmrs6000 opsys=aix3-2
 746   ;;
 747   romp-ibm-bsd4.3* )
 748     machine=ibmrt opsys=bsd4-3
 749   ;;
 750   romp-ibm-bsd4.2* )
 751     machine=ibmrt opsys=bsd4-2
 752   ;;
 753   romp-ibm-aos4.3* )
 754     machine=ibmrt opsys=bsd4-3
 755   ;;
 756   romp-ibm-aos4.2* )
 757     machine=ibmrt opsys=bsd4-2
 758   ;;
 759   romp-ibm-aos* )
 760     machine=ibmrt opsys=bsd4-3
 761   ;;
 762   romp-ibm-bsd* )
 763     machine=ibmrt opsys=bsd4-3
 764   ;;
 765   romp-ibm-aix* )
 766     machine=ibmrt-aix opsys=usg5-2-2
 767   ;;
 768
 769   ## Integrated Solutions `Optimum V'
 770   m68*-isi-bsd4.2* )
 771     machine=isi-ov opsys=bsd4-2
 772   ;;
 773   m68*-isi-bsd4.3* )
 774     machine=isi-ov opsys=bsd4-3
 775   ;;
 776
 777   ## Intel 386 machines where we do care about the manufacturer
 778   i[34]86-intsys-sysv* )
 779     machine=is386 opsys=usg5-2-2
 780   ;;
 781
 782   ## Prime EXL
 783   i386-prime-sysv* )
 784     machine=i386 opsys=usg5-3
 785   ;;
 786
 787   ## Sequent Symmetry
 788   i386-sequent-bsd* )
 789     machine=symmetry opsys=bsd4-3
 790   ;;
 791
 792   ## Unspecified sysv on an ncr machine defaults to svr4.2.
 793   ## (Plain usg5-4 doesn't turn on POSIX signals, which we need.)
 794   i[34]86-ncr-sysv* )
 795     machine=intel386 opsys=usg5-4-2
 796   ;;
 797
 798   ## Intel 860
 799   i860-*-sysv4* )
 800     machine=i860 opsys=usg5-4
 801     NON_GNU_CC="/bin/cc" # Ie, not the one in /usr/ucb/cc.
 802     NON_GNU_CPP="/usr/ccs/lib/cpp" # cc -E tokenizes macro expansion.
 803   ;;
 804
 805   ## Masscomp machines
 806   m68*-masscomp-rtu* )
 807     machine=masscomp opsys=rtu
 808   ;;
 809
 810   ## Megatest machines
 811   m68*-megatest-bsd* )
 812     machine=mega68 opsys=bsd4-2
 813   ;;
 814
 815   ## Workstations sold by MIPS
 816   ## This is not necessarily all workstations using the MIPS processor -
 817   ## Irises are produced by SGI, and DECstations by DEC.
 818
 819   ## etc/MACHINES lists mips.h and mips4.h as possible machine files,
 820   ## and usg5-2-2 and bsd4-3 as possible OS files.  The only guidance
 821   ## it gives for choosing between the alternatives seems to be "Use
 822   ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with
 823   ## the BSD world."  I'll assume that these are instructions for
 824   ## handling two odd situations, and that every other situation
 825   ## should use mips.h and usg5-2-2, they being listed first.
 826   mips-mips-usg* )
 827     machine=mips4
 828     ## Fall through to the general code at the bottom to decide on the OS.
 829   ;;
 830   mips-mips-riscos4* )
 831     machine=mips4 opsys=bsd4-3
 832     NON_GNU_CC="cc -systype bsd43"
 833     NON_GNU_CPP="cc -systype bsd43 -E"
 834   ;;
 835   mips-mips-bsd* )
 836     machine=mips opsys=bsd4-3
 837   ;;
 838   mips-mips-* )
 839     machine=mips opsys=usg5-2-2
 840   ;;
 841
 842   ## NeXT
 843   m68*-next-* | i[34]86-next-* )
 844     machine=next opsys=mach2
 845   ;;
 846
 847   ## The complete machine from National Semiconductor
 848   ns32k-ns-genix* )
 849     machine=ns32000 opsys=usg5-2
 850   ;;
 851
 852   ## NCR machines
 853   m68*-ncr-sysv2* | m68*-ncr-sysvr2* )
 854     machine=tower32 opsys=usg5-2-2
 855   ;;
 856   m68*-ncr-sysv3* | m68*-ncr-sysvr3* )
 857     machine=tower32v3 opsys=usg5-3
 858   ;;
 859
 860   ## Nixdorf Targon 31
 861   m68*-nixdorf-sysv* )
 862     machine=targon31 opsys=usg5-2-2
 863   ;;
 864
 865   ## Nu (TI or LMI)
 866   m68*-nu-sysv* )
 867     machine=nu opsys=usg5-2
 868   ;;
 869
 870   ## Plexus
 871   m68*-plexus-sysv* )
 872     machine=plexus opsys=usg5-2
 873   ;;
 874
 875   ## Pyramid machines
 876   ## I don't really have any idea what sort of processor the Pyramid has,
 877   ## so I'm assuming it is its own architecture.
 878   pyramid-pyramid-bsd* )
 879     machine=pyramid opsys=bsd4-2
 880   ;;
 881
 882   ## Sequent Balance
 883   ns32k-sequent-bsd4.2* )
 884     machine=sequent opsys=bsd4-2
 885   ;;
 886   ns32k-sequent-bsd4.3* )
 887     machine=sequent opsys=bsd4-3
 888   ;;
 889
 890   ## Siemens Nixdorf
 891   mips-siemens-sysv* )
 892     machine=mips-siemens opsys=usg5-4
 893     NON_GNU_CC=/usr/ccs/bin/cc
 894     NON_GNU_CPP=/usr/ccs/lib/cpp
 895   ;;
 896
 897   ## Silicon Graphics machines
 898   ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030)
 899   m68*-sgi-iris3.5* )
 900     machine=irist opsys=iris3-5
 901   ;;
 902   m68*-sgi-iris3.6* | m68*-sgi-iris*)
 903     machine=irist opsys=iris3-6
 904   ;;
 905   ## Iris 4D
 906   mips-sgi-irix3* )
 907     machine=iris4d opsys=irix3-3
 908   ;;
 909   mips-sgi-irix5* )
 910     machine=iris4d opsys=irix5-0
 911   ;;
 912   mips-sgi-irix4* | mips-sgi-irix* )
 913     machine=iris4d opsys=irix4-0
 914   ;;
 915
 916   ## SONY machines
 917   m68*-sony-bsd4.2* )
 918     machine=news opsys=bsd4-2
 919   ;;
 920   m68*-sony-bsd4.3* )
 921     machine=news opsys=bsd4-3
 922   ;;
 923   m68*-sony-newsos3*)
 924     machine=news opsys=bsd4-3
 925   ;;
 926   mips-sony-bsd* | mips-sony-newsos4* )
 927     machine=news-risc opsys=bsd4-3
 928   ;;
 929   mips-sony-newsos* )
 930     machine=news-risc opsys=newsos5
 931   ;;
 932
 933   ## Stride
 934   m68*-stride-sysv* )
 935     machine=stride opsys=usg5-2
 936   ;;
 937
 938   ## Suns
 939   *-sun-sunos* | *-sun-bsd* | *-sun-solaris* | i[34]86-*-solaris2* | i[34]86-*-sunos5* )
 940     case "${canonical}" in
 941       m68*-sunos1* )    machine=sun1 ;;
 942       m68*-sunos2* )    machine=sun2 ;;
 943       m68* )            machine=sun3 ;;
 944       i[34]86-sun-* )   machine=sun386 ;;
 945       i[34]86-*-* )     machine=intel386 ;;
 946       sparc* )          machine=sparc ;;
 947       * )               unported=true ;;
 948     esac
 949     case "${canonical}" in
 950       ## The Sun386 didn't get past 4.0.
 951       i386-*-sunos4       ) opsys=sunos4-0 ;;
 952       *-sunos4.0*         ) opsys=sunos4-0 ;;
 953       *-sunos4.1.3*       ) opsys=sunos4-1-3
 954                 NON_GCC_TEST_OPTIONS=-Bstatic
 955                 GCC_TEST_OPTIONS=-static
 956                 ;;
 957       *-sunos4shr*        ) opsys=sunos4shr ;;
 958       *-sunos4* | *-sunos ) opsys=sunos4-1
 959                 NON_GCC_TEST_OPTIONS=-Bstatic
 960                 GCC_TEST_OPTIONS=-static
 961                 ;;
 962       *-sunos5.3* | *-solaris2.3* )
 963                 opsys=sol2-3
 964                 NON_GNU_CPP=/usr/ccs/lib/cpp
 965                 ;;
 966       *-sunos5* | *-solaris* )
 967                 opsys=sol2
 968                 NON_GNU_CPP=/usr/ccs/lib/cpp
 969                 ;;
 970       *                   ) opsys=bsd4-2   ;;
 971     esac
 972   ;;
 973
 974   ## Tadpole 68k
 975   m68*-tadpole-sysv* )
 976     machine=tad68k opsys=usg5-3
 977   ;;
 978
 979   ## Tahoe machines
 980   tahoe-tahoe-bsd4.2* )
 981     machine=tahoe opsys=bsd4-2
 982   ;;
 983   tahoe-tahoe-bsd4.3* )
 984     machine=tahoe opsys=bsd4-3
 985   ;;
 986
 987   ## Tandem Integrity S2
 988   mips-tandem-sysv* )
 989     machine=tandem-s2 opsys=usg5-3
 990   ;;
 991
 992   ## Tektronix XD88
 993   m88k-tektronix-sysv3* )
 994   machine=tekxd88 opsys=usg5-3
 995   ;;
 996
 997   ## Tektronix 16000 box (6130?)
 998   ns16k-tektronix-bsd* )
 999     machine=ns16000 opsys=bsd4-2
1000   ;;
1001   ## Tektronix 4300
1002   ## src/m/tek4300.h hints that this is a m68k machine.
1003   m68*-tektronix-bsd* )
1004     machine=tek4300 opsys=bsd4-3
1005   ;;
1006
1007   ## Titan P2 or P3
1008   ## We seem to have lost the machine-description file titan.h!
1009   titan-titan-sysv* )
1010     machine=titan opsys=usg5-3
1011   ;;
1012
1013   ## Ustation E30 (SS5E)
1014   m68*-unisys-uniplus* )
1015     machine=ustation opsystem=unipl5-2
1016   ;;
1017
1018   ## Vaxen.
1019   vax-dec-* )
1020     machine=vax
1021     case "${canonical}" in
1022       *-bsd4.1* )                                       opsys=bsd4-1 ;;
1023       *-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* )      opsys=bsd4-2 ;;
1024       *-bsd4.3* | *-ultrix* )                           opsys=bsd4-3 ;;
1025       *-bsd386* | *-bsdi* )                             opsys=bsd386 ;;
1026       *-sysv[01]* | *-sysvr[01]* )                      opsys=usg5-0 ;;
1027       *-sysv2* | *-sysvr2* )                            opsys=usg5-2 ;;
1028       *-vms* )                                          opsys=vms ;;
1029       * )                                               unported=true
1030     esac
1031   ;;
1032
1033   ## Whitechapel MG1
1034   ns16k-whitechapel-* )
1035     machine=mg1
1036     ## We don't know what sort of OS runs on these; we'll let the
1037     ## operating system guessing code below try.
1038   ;;
1039
1040   ## Wicat
1041   m68*-wicat-sysv* )
1042     machine=wicat opsys=usg5-2
1043   ;;
1044
1045   ## Intel 386 machines where we don't care about the manufacturer
1046   i[34]86-*-* )
1047     machine=intel386
1048     case "${canonical}" in
1049       *-isc1.* | *-isc2.[01]* ) opsys=386-ix ;;
1050       *-isc2.2* )               opsys=isc2-2 ;;
1051       *-isc4.0* )               opsys=isc4-0 ;;
1052       *-isc* )                  opsys=isc3-0 ;;
1053       *-esix5* )                opsys=esix5r4; NON_GNU_CPP=/usr/lib/cpp ;;
1054       *-esix* )                 opsys=esix ;;
1055       *-xenix* )                opsys=xenix ;;
1056       *-linux* )                opsys=linux ;;
1057       *-sco3.2v4* )             opsys=sco4 ;;
1058       *-bsd386* | *-bsdi* )     opsys=bsd386 ;;
1059       *-386bsd* )               opsys=386bsd ;;
1060       *-freebsd* )              opsys=freebsd ;;
1061       *-nextstep* )             opsys=mach2 ;;
1062       ## Otherwise, we'll fall through to the generic opsys code at the bottom.
1063     esac
1064   ;;
1065
1066   * )
1067     unported=true
1068   ;;
1069 esac
1070
1071 ### If the code above didn't choose an operating system, just choose
1072 ### an operating system based on the configuration name.  You really
1073 ### only want to use this when you have no idea what the right
1074 ### operating system is; if you know what operating systems a machine
1075 ### runs, it's cleaner to make it explicit in the case statement
1076 ### above.
1077 if [ x"${opsys}" = x ]; then
1078   case "${canonical}" in
1079     *-gnu* )                            opsys=gnu ;;
1080     *-bsd4.[01] )                       opsys=bsd4-1 ;;
1081     *-bsd4.2 )                          opsys=bsd4-2 ;;
1082     *-bsd4.3 )                          opsys=bsd4-3 ;;
1083     *-sysv0 | *-sysvr0 )                opsys=usg5-0 ;;
1084     *-sysv2 | *-sysvr2 )                opsys=usg5-2 ;;
1085     *-sysv2.2 | *-sysvr2.2 )            opsys=usg5-2-2 ;;
1086     *-sysv3 | *-sysvr3 )                opsys=usg5-3 ;;
1087     *-sysv4 | *-sysvr4 )                opsys=usg5-4 ;;
1088     *-sysv4.1 | *-sysvr4.1 )
1089         NON_GNU_CPP=/usr/lib/cpp
1090         opsys=usg5-4 ;;
1091     *-sysv4.2 | *-sysvr4.2 )            opsys=usg5-4-2 ;;
1092     * )
1093       unported=true
1094     ;;
1095   esac
1096 fi
1097
1098 if $unported ; then
1099   (echo "${progname}: Emacs hasn't been ported to \`${canonical}' systems."
1100    echo "${progname}: Check \`etc/MACHINES' for recognized configuration names."
1101   ) >&2
1102   exit 1
1103 fi
1104
1105 machfile="m/${machine}.h"
1106 opsysfile="s/${opsys}.h"
1107
1108 ]
1109 AC_PREPARE(lisp)
1110 AC_CONFIG_HEADER(src/config.h)
1111 [
1112
1113 #### Choose a compiler.
1114 if [ "x$CC" = x ]
1115 then true
1116 else cc_specified=1
1117 fi
1118
1119 case ${with_gcc} in
1120   "yes" ) CC="gcc" GCC=1 ;;
1121   "no"  )
1122     if [ "x$CC" = x ]
1123     then CC=cc;
1124     else true;
1125     fi
1126     ;;
1127   * )
1128     ] AC_PROG_CC [
1129 esac
1130
1131 #### Some systems specify a CPP to use unless we are using GCC.
1132 #### Now that we know whether we are using GCC, we can decide whether
1133 #### to use that one.
1134 if [ "x$NON_GNU_CPP" = x ] || [ x$GCC = x1 ] || [ "x$CPP" != x ]
1135 then true
1136 else
1137   CPP="$NON_GNU_CPP"
1138 fi
1139
1140 #### Some systems specify a CC to use unless we are using GCC.
1141 #### Now that we know whether we are using GCC, we can decide whether
1142 #### to use that one.
1143 if [ "x$NON_GNU_CC" = x ] || [ x$GCC = x1 ] || [ x$cc_specified = x1 ]
1144 then true
1145 else
1146   CC="$NON_GNU_CC"
1147 fi
1148
1149 if [ x$GCC = x1 ] && [ "x$GCC_TEST_OPTIONS" != x ]
1150 then
1151   CC="$CC $GCC_TEST_OPTIONS"
1152 fi
1153
1154 if [ x$GCC = x ] && [ "x$NON_GCC_TEST_OPTIONS" != x ]
1155 then
1156   CC="$CC $NON_GCC_TEST_OPTIONS"
1157 fi
1158
1159 #### Some other nice autoconf tests.  If you add a test here which
1160 #### should make an entry in src/config.h, don't forget to add an
1161 #### #undef clause to src/config.h.in for autoconf to modify.
1162 ]
1163 dnl checks for programs
1164 AC_LN_S
1165 AC_PROG_CPP
1166 AC_PROG_INSTALL
1167 AC_PROG_YACC
1168
1169 dnl checks for UNIX variants that set `DEFS'
1170
1171 dnl checks for header files
1172 AC_HAVE_HEADERS(sys/timeb.h sys/time.h unistd.h)
1173 AC_STDC_HEADERS
1174 AC_TIME_WITH_SYS_TIME
1175 dnl In Autoconf 1.8 use AC_SYS_SIGLIST_DECLARED instead of this.
1176 AC_COMPILE_CHECK(sys_siglist declaration in signal.h or unistd.h,
1177                  [#include <signal.h>
1178 /* NetBSD declares sys_siglist in <unistd.h>.  */
1179 #ifdef HAVE_UNISTD_H
1180 #include <unistd.h>
1181 #endif], [char *msg = *(sys_siglist + 1);],
1182                  AC_DEFINE(SYS_SIGLIST_DECLARED))
1183
1184 dnl checks for typedefs
1185 AC_RETSIGTYPE
1186
1187 dnl checks for structure members
1188 AC_STRUCT_TM
1189 AC_TIMEZONE
1190
1191 dnl checks for compiler characteristics
1192 AC_CONST
1193
1194 dnl check for Make feature
1195 AC_SET_MAKE
1196
1197 dnl checks for operating system services
1198 AC_LONG_FILE_NAMES
1199
1200 dnl other checks for UNIX variants
1201 [
1202
1203 #### Choose a window system.
1204 echo "checking for specified window system"
1205
1206 window_system=''
1207 case "${with_x}" in
1208   yes )
1209     window_system=${window_system}x11
1210   ;;
1211   no )
1212     window_system=${window_system}none
1213   ;;
1214 esac
1215 case "${window_system}" in
1216   .* )
1217   ;;
1218   * )
1219     case "${with_x11}" in
1220       yes )
1221         window_system=x11
1222       ;;
1223       no )
1224         window_system=none
1225       ;;
1226     esac
1227     case "${with_x10}" in
1228       yes )
1229         window_system=x10
1230       ;;
1231       no )
1232         window_system=none
1233       ;;
1234     esac
1235   ;;
1236 esac
1237
1238 case "${window_system}" in
1239   "none" | "x11" | "x10" ) ;;
1240   "" )
1241     # --x-includes or --x-libraries implies --with-x11.
1242     if [ -n "${x_includes}" ] || [ -n "${x_libraries}" ]; then
1243       window_system=x11
1244     else
1245       echo "  No window system specified.  Looking for X11."
1246       # If the user didn't specify a window system and we found X11, use it.
1247       if [ -r /usr/lib/libX11.a \
1248          -o -d /usr/include/X11 \
1249          -o -d /usr/X386/include \
1250          -o -d ${x_includes}/X11 ]; then
1251         window_system=x11
1252       fi
1253     fi
1254   ;;
1255   * )
1256     echo "Don't specify a window system more than once." >&2
1257     exit 1
1258   ;;
1259 esac
1260
1261 case "${window_system}" in
1262   "" | "x11" )
1263     ### If the user hasn't specified where we should find X, try
1264     ### letting autoconf figure that out.
1265     if [ -z "${x_includes}" ] && [ -z "${x_libraries}" ]; then
1266       ]
1267       AC_FIND_X
1268       [
1269     fi
1270     if [ -n "${x_includes}" ] || [ -n "${x_libraries}" ]; then
1271       window_system=x11
1272     fi
1273   ;;
1274 esac
1275
1276 [ -z "${window_system}" ] && window_system=none
1277
1278 [ -n "${x_libraries}" ] && LD_SWITCH_X_SITE="-L${x_libraries}"
1279 [ -n "${x_libraries}" ] && LD_SWITCH_X_SITE_AUX="-R${x_libraries}"
1280 [ -n "${x_includes}" ] && C_SWITCH_X_SITE="-I${x_includes}"
1281
1282 # Avoid forcing the search of /usr/include before fixed include files.
1283 if [ "$C_SWITCH_X_SITE" = "-I/usr/include" ]; then
1284    C_SWITCH_X_SITE=" "
1285 fi
1286
1287 case "${window_system}" in
1288   x11 )
1289     HAVE_X_WINDOWS=yes
1290     HAVE_X11=yes
1291     echo "  Using X11."
1292     case "${with_x_toolkit}" in
1293       athena | lucid )
1294         USE_X_TOOLKIT=LUCID
1295         echo "  Using Xt toolkit."
1296         ;;
1297       motif )
1298         USE_X_TOOLKIT=MOTIF
1299         echo "  Using Motif toolkit."
1300         ;;
1301       open-look )
1302         USE_X_TOOLKIT=OPEN_LOOK
1303         echo "  Using Open-Look toolkit."
1304         ;;
1305       * )
1306         USE_X_TOOLKIT=none
1307         echo "  Using Xlib directly."
1308       ;;
1309     esac
1310   ;;
1311   x10 )
1312     HAVE_X_WINDOWS=yes
1313     HAVE_X11=no
1314     USE_X_TOOLKIT=none
1315     echo "  Using X10."
1316   ;;
1317   none )
1318     HAVE_X_WINDOWS=no
1319     HAVE_X11=no
1320     USE_X_TOOLKIT=none
1321     echo "  Using no window system."
1322   ;;
1323 esac
1324 X_TOOLKIT_TYPE=$USE_X_TOOLKIT
1325
1326 ### If we're using X11, we should use the X menu package.
1327 HAVE_X_MENU=no
1328 case ${HAVE_X11} in
1329   yes )
1330     HAVE_X_MENU=yes
1331   ;;
1332 esac
1333
1334 #### Extract some information from the operating system and machine files.
1335
1336 echo "examining the machine- and system-dependent files to find out"
1337 echo " - which libraries the lib-src programs will want, and"
1338 echo " - whether the GNU malloc routines are usable"
1339
1340 ### First figure out CFLAGS (which we use for running the compiler here)
1341 ### and REAL_CFLAGS (which we use for real compilation).
1342 ### The two are the same except on a few systems, where they are made
1343 ### different to work around various lossages.  For example,
1344 ### GCC 2.5 on Linux needs them to be different because it treats -g
1345 ### as implying static linking.
1346
1347 ### If the CFLAGS env var is specified, we use that value
1348 ### instead of the default.
1349
1350 ### It's not important that this name contain the PID; you can't run
1351 ### two configures in the same directory and have anything work
1352 ### anyway.
1353 tempcname="conftest.c"
1354
1355 echo '
1356 #include "'${srcdir}'/src/'${opsysfile}'"
1357 #include "'${srcdir}'/src/'${machfile}'"
1358 #ifndef LIBS_MACHINE
1359 #define LIBS_MACHINE
1360 #endif
1361 #ifndef LIBS_SYSTEM
1362 #define LIBS_SYSTEM
1363 #endif
1364 #ifndef C_SWITCH_SYSTEM
1365 #define C_SWITCH_SYSTEM
1366 #endif
1367 #ifndef C_SWITCH_MACHINE
1368 #define C_SWITCH_MACHINE
1369 #endif
1370 configure___ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM
1371 configure___ c_switch_system=C_SWITCH_SYSTEM
1372 configure___ c_switch_machine=C_SWITCH_MACHINE
1373
1374 #ifndef LIB_X11_LIB
1375 #define LIB_X11_LIB -lX11
1376 #endif
1377
1378 #ifndef LIBX11_MACHINE
1379 #define LIBX11_MACHINE
1380 #endif
1381
1382 #ifndef LIBX11_SYSTEM
1383 #define LIBX11_SYSTEM
1384 #endif
1385 configure___ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM
1386
1387 #ifdef UNEXEC
1388 configure___ unexec=UNEXEC
1389 #else
1390 configure___ unexec=unexec.o
1391 #endif
1392
1393 #ifdef SYSTEM_MALLOC
1394 configure___ system_malloc=yes
1395 #else
1396 configure___ system_malloc=no
1397 #endif
1398
1399 #ifndef C_DEBUG_SWITCH
1400 #define C_DEBUG_SWITCH -g
1401 #endif
1402
1403 #ifndef C_OPTIMIZE_SWITCH
1404 #define C_OPTIMIZE_SWITCH -O
1405 #endif
1406
1407 #ifdef THIS_IS_CONFIGURE
1408
1409 /* Get the CFLAGS for tests in configure.  */
1410 #ifdef __GNUC__
1411 configure___ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}'
1412 #else
1413 configure___ CFLAGS=C_DEBUG_SWITCH '${CFLAGS}'
1414 #endif
1415
1416 #else /* not THIS_IS_CONFIGURE */
1417
1418 /* Get the CFLAGS for real compilation.  */
1419 #ifdef __GNUC__
1420 configure___ REAL_CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}'
1421 #else
1422 configure___ REAL_CFLAGS=C_DEBUG_SWITCH '${CFLAGS}'
1423 #endif
1424
1425 #endif /* not THIS_IS_CONFIGURE */
1426 ' > ${tempcname}
1427 # The value of CPP is a quoted variable reference, so we need to do this
1428 # to get its actual value...
1429 CPP=`eval "echo $CPP"`
1430 if [ "x$CFLAGS" = x ]; then
1431   eval `${CPP} -Isrc ${tempcname} \
1432          | grep 'configure___' \
1433          | sed -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/'`
1434   eval `${CPP} -Isrc -DTHIS_IS_CONFIGURE ${tempcname} \
1435          | grep 'configure___' \
1436          | sed -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/'`
1437 else
1438   REAL_CFLAGS="$CFLAGS"
1439 fi
1440 rm ${tempcname}
1441
1442 ### Compute the unexec source name from the object name.
1443 UNEXEC_SRC="`echo ${unexec} | sed 's/\.o/.c/'`"
1444
1445 # Do the opsystem or machine files prohibit the use of the GNU malloc?
1446 # Assume not, until told otherwise.
1447 GNU_MALLOC=yes
1448 if [ "${system_malloc}" = "yes" ]; then
1449   GNU_MALLOC=no
1450   GNU_MALLOC_reason="
1451   (The GNU allocators don't work with this system configuration.)"
1452 fi
1453
1454 if [ x"${REL_ALLOC}" = x ]; then
1455   REL_ALLOC=${GNU_MALLOC}
1456 fi
1457
1458 LISP_FLOAT_TYPE=yes
1459
1460
1461 #### Add the libraries to LIBS and check for some functions.
1462
1463 ]
1464 DEFS="$c_switch_system $c_switch_machine $DEFS"
1465 LIBS="$libsrc_libs"
1466
1467 dnl If found, this defines HAVE_LIBDNET, which m/pmax.h checks,
1468 dnl and also adds -ldnet to LIBS, which Autoconf uses for checks.
1469 AC_HAVE_LIBRARY(-ldnet)
1470 dnl This causes -lresolv to get used in subsequent tests,
1471 dnl which causes failures on some systems such as HPUX 9.
1472 dnl AC_HAVE_LIBRARY(-lresolv)
1473
1474 AC_HAVE_LIBRARY(-lXbsd, LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd")
1475
1476 echo checking for XFree86
1477 if test -d /usr/X386/include; then
1478   HAVE_XFREE386=yes
1479   test -z "${C_SWITCH_X_SITE}" && C_SWITCH_X_SITE="-I/usr/X386/include"
1480 fi
1481
1482 # We change CFLAGS temporarily so that C_SWITCH_X_SITE gets used
1483 # for the tests that follow.
1484
1485 if test "${HAVE_X11}" = "yes"; then
1486   DEFS="$C_SWITCH_X_SITE $DEFS"
1487   LIBS="$LD_SWITCH_X_SITE $LIBX $LIBS"
1488   CFLAGS="$C_SWITCH_X_SITE $CFLAGS"
1489   AC_HAVE_FUNCS(XrmSetDatabase XScreenResourceString \
1490 XScreenNumberOfScreen XSetWMProtocols)
1491 fi
1492
1493 if test "${USE_X_TOOLKIT}" != "none"; then
1494   AC_COMPILE_CHECK(X11 toolkit version,
1495                    [#include <X11/Intrinsic.h>],
1496                    [
1497 #if XtSpecificationRelease < 6
1498 fail;
1499 #endif
1500 ],
1501                    AC_DEFINE(HAVE_X11XTR6))
1502 fi
1503
1504 # If netdb.h doesn't declare h_errno, we must declare it by hand.
1505 AC_COMPILE_CHECK(declaration of h_errno in netdb.h,
1506                  [#include <netdb.h>],
1507                  [
1508 int
1509 foo ()
1510 {
1511   return h_errno;
1512 }
1513 ],
1514                  AC_DEFINE(HAVE_H_ERRNO))
1515
1516 AC_ALLOCA
1517
1518 # logb and frexp are found in -lm on most systems.
1519 AC_HAVE_LIBRARY(-lm)
1520 AC_HAVE_FUNCS(gettimeofday gethostname dup2 rename closedir mkdir rmdir \
1521 random rand48 bcopy bcmp logb frexp fmod drem ftime res_init setsid strerror \
1522 fpathconf)
1523
1524 ok_so_far=true
1525 AC_FUNC_CHECK(socket, , ok_so_far=)
1526 if test -n "$ok_so_far"; then
1527   AC_HEADER_CHECK(netinet/in.h, , ok_so_far=)
1528 fi
1529 if test -n "$ok_so_far"; then
1530   AC_HEADER_CHECK(arpa/inet.h, , ok_so_far=)
1531 fi
1532 if test -n "$ok_so_far"; then
1533   AC_DEFINE(HAVE_INET_SOCKETS)
1534 fi
1535
1536 # Set up the CFLAGS for real compilation, so we can substitute it.
1537 CFLAGS="$REAL_CFLAGS"
1538
1539 [
1540 #### Find out which version of Emacs this is.
1541 version=`grep 'defconst[         ]*emacs-version' ${srcdir}/lisp/version.el \
1542          | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`
1543 if [ x"${version}" = x ]; then
1544   echo "${progname}: can't find current emacs version in
1545         \`${srcdir}/lisp/version.el'." >&2
1546   exit 1
1547 fi
1548
1549 if [ -f /usr/lpp/X11/bin/smt.exp ]; then
1550   ]
1551   AC_DEFINE(HAVE_AIX_SMT_EXP)
1552   [
1553 fi
1554
1555 #### Specify what sort of things we'll be editing into Makefile and config.h.
1556 ### Use configuration here uncanonicalized to avoid exceeding size limits.
1557 ]
1558 AC_SUBST(version)
1559 AC_SUBST(configuration)
1560 AC_SUBST(srcdir)
1561 AC_SUBST(prefix)
1562 AC_SUBST(exec_prefix)
1563 AC_SUBST(bindir)
1564 AC_SUBST(datadir)
1565 AC_SUBST(statedir)
1566 AC_SUBST(libdir)
1567 AC_SUBST(mandir)
1568 AC_SUBST(infodir)
1569 AC_SUBST(lispdir)
1570 AC_SUBST(locallisppath)
1571 AC_SUBST(lisppath)
1572 AC_SUBST(etcdir)
1573 AC_SUBST(lockdir)
1574 AC_SUBST(archlibdir)
1575 AC_SUBST(docdir)
1576 AC_SUBST(c_switch_system)
1577 AC_SUBST(c_switch_machine)
1578 AC_SUBST(LD_SWITCH_X_SITE)
1579 AC_SUBST(LD_SWITCH_X_SITE_AUX)
1580 AC_SUBST(C_SWITCH_X_SITE)
1581 AC_SUBST(CFLAGS)
1582 AC_SUBST(X_TOOLKIT_TYPE)
1583 AC_SUBST(machfile)
1584 AC_SUBST(opsysfile)
1585
1586 AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION,  "\"${configuration}\"")
1587 AC_DEFINE_UNQUOTED(config_machfile,  "\"${machfile}\"")
1588 AC_DEFINE_UNQUOTED(config_opsysfile, "\"${opsysfile}\"")
1589 AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE, ${LD_SWITCH_X_SITE})
1590 AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE_AUX, ${LD_SWITCH_X_SITE_AUX})
1591 AC_DEFINE_UNQUOTED(C_SWITCH_X_SITE,  ${C_SWITCH_X_SITE})
1592 AC_DEFINE_UNQUOTED(UNEXEC_SRC,       ${UNEXEC_SRC})
1593
1594 [
1595 if [ "${HAVE_X_WINDOWS}" = "yes" ] ; then
1596   ] AC_DEFINE(HAVE_X_WINDOWS) [
1597 fi
1598 if [ "${USE_X_TOOLKIT}" != "none" ] ; then
1599   ] AC_DEFINE(USE_X_TOOLKIT) [
1600 fi
1601 if [ "${HAVE_X11}" = "yes" ] ; then
1602   ] AC_DEFINE(HAVE_X11) [
1603 fi
1604 if [ "${HAVE_XFREE386}" = "yes" ] ; then
1605   ] AC_DEFINE(HAVE_XFREE386) [
1606 fi
1607 if [ "${HAVE_X_MENU}" = "yes" ] ; then
1608   ] AC_DEFINE(HAVE_X_MENU) [
1609 fi
1610 if [ "${GNU_MALLOC}" = "yes" ] ; then
1611   ] AC_DEFINE(GNU_MALLOC) [
1612 fi
1613 if [ "${REL_ALLOC}" = "yes" ] ; then
1614   ] AC_DEFINE(REL_ALLOC) [
1615 fi
1616 if [ "${LISP_FLOAT_TYPE}" = "yes" ] ; then
1617   ] AC_DEFINE(LISP_FLOAT_TYPE) [
1618 fi
1619
1620 # ====================== Developer's configuration =======================
1621
1622 # The following assignments make sense if you're running Emacs on a single
1623 # machine, one version at a time, and  you want changes to the lisp and etc
1624 # directories in the source tree to show up immediately in your working
1625 # environment.  It saves a great deal of disk space by not duplicating the
1626 # lisp and etc directories.
1627
1628 if [ "$run_in_place" = "1" ]; then
1629    lispdir='${srcdir}/lisp'
1630    locallisppath='${srcdir}/site-lisp'
1631    etcdir='${srcdir}/etc'
1632    lockdir='${srcdir}/lock'
1633    # We used to make archlibdir and docdir absolute,
1634    # but that caused trouble with automounters.
1635    archlibdir='${srcdir}/lib-src'
1636    docdir='${srcdir}/etc'
1637    infodir='${srcdir}/info'
1638 elif [ "$single_tree" = "1" ]; then
1639    if [ "$exec_prefix_specified" = "" ]; then
1640       exec_prefix='${prefix}'
1641    fi
1642    if [ "$bindir_specified" = "" ]; then
1643       bindir='${exec_prefix}/bin/${configuration}'
1644    fi
1645    if [ "$datadir_specified" = "" ]; then
1646       datadir='${prefix}/common'
1647    fi
1648    if [ "$statedir_specified" = "" ]; then
1649       statedir='${prefix}/common'
1650    fi
1651    if [ "$libdir_specified" = "" ]; then
1652       libdir='${bindir}'
1653    fi
1654    if [ "$lispdir_specified" = "" ]; then
1655       lispdir='${prefix}/common/lisp'
1656    fi
1657    if [ "$locallisppath_specified" = "" ]; then
1658       locallisppath='${prefix}/common/site-lisp'
1659    fi
1660    if [ "$lockdir_specified" = "" ]; then
1661       lockdir='${prefix}/common/lock'
1662    fi
1663    if [ "$archlibdir_specified" = "" ]; then
1664       archlibdir='${libdir}/etc'
1665    fi
1666    if [ "$etcdir_specified" = "" ]; then
1667       etcdir='${prefix}/common/data'
1668    fi
1669    if [ "$docdir_specified" = "" ]; then
1670       docdir='${prefix}/common/data'
1671    fi
1672 fi
1673
1674 #### Report on what we decided to do.
1675 echo "
1676
1677 Configured for \`${canonical}'.
1678
1679   Where should the build process find the source code?    ${srcdir}
1680   What operating system and machine description files should Emacs use?
1681         \`${opsysfile}' and \`${machfile}'
1682   What compiler should emacs be built with?               ${CC} ${CFLAGS}
1683   Should Emacs use the GNU version of malloc?             ${GNU_MALLOC}${GNU_MALLOC_reason}
1684   Should Emacs use the relocating allocator for buffers?  ${REL_ALLOC}
1685   What window system should Emacs use?                    ${window_system}
1686   What toolkit should Emacs use?                          ${USE_X_TOOLKIT}${x_includes+
1687   Where do we find X Windows header files?                }${x_includes}${x_libraries+
1688   Where do we find X Windows libraries?                   }${x_libraries}
1689
1690 "
1691
1692 # Remove any trailing slashes in these variables.
1693 test -n "${prefix}" &&
1694   prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'`
1695 test -n "${exec_prefix}" &&
1696   exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`
1697 ]
1698 AC_OUTPUT(Makefile lib-src/Makefile.in oldXMenu/Makefile lwlib/Makefile src/Makefile.in, [
1699
1700 # Build src/Makefile from ${srcdir}/src/Makefile.in.  This must be done
1701 # after src/config.h is built, since we rely on that file.
1702
1703 changequote(,)dnl The horror, the horror.
1704 # Now get this: Some word that is part of the ${srcdir} directory name
1705 # or the ${configuration} value might, just might, happen to be an
1706 # identifier like `sun4' or `i386' or something, and be predefined by
1707 # the C preprocessor to some helpful value like 1, or maybe the empty
1708 # string.  Needless to say consequent macro substitutions are less
1709 # than conducive to the makefile finding the correct directory.
1710 undefs="`echo $top_srcdir $configuration $canonical |
1711 sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/  *$//' \
1712     -e 's/  */ -U/g' -e 's/-U[0-9][^ ]*//g' \
1713 `"
1714 changequote([,])dnl
1715
1716 echo creating lib-src/Makefile
1717 ( cd lib-src
1718   rm -f junk.c junk1.c junk2.c
1719   sed -e '/start of cpp stuff/q' \
1720       < Makefile.in > junk1.c
1721   sed -e '1,/start of cpp stuff/d'\
1722       -e 's@/\*\*/#\(.*\)$@/* \1 */@' \
1723       < Makefile.in > junk.c
1724   $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \
1725       sed -e 's/^ /     /' -e '/^#/d' -e '/^[   \f]*$/d' > junk2.c
1726   cat junk1.c junk2.c > Makefile.new
1727   rm -f junk.c junk1.c junk2.c
1728   chmod 444 Makefile.new
1729   mv -f Makefile.new Makefile
1730 )
1731
1732 echo creating src/Makefile
1733 ( cd src
1734   rm -f junk.c junk1.c junk2.c
1735   sed -e '/start of cpp stuff/q' \
1736       < Makefile.in > junk1.c
1737   sed -e '1,/start of cpp stuff/d'\
1738       -e 's@/\*\*/#\(.*\)$@/* \1 */@' \
1739       < Makefile.in > junk.c
1740   $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \
1741       sed -e 's/^ /     /' -e '/^#/d' -e '/^[   \f]*$/d' > junk2.c
1742   cat junk1.c junk2.c > Makefile.new
1743   rm -f junk.c junk1.c junk2.c
1744   chmod 444 Makefile.new
1745   mv -f Makefile.new Makefile
1746 )])