1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
5 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
7 # This file is part of GNU Emacs.
9 # GNU Emacs is free software: you can redistribute it and/or modify
10 # it under the terms of the GNU General Public License as published by
11 # the Free Software Foundation, either version 3 of the License, or
12 # (at your option) any later version.
14 # GNU Emacs is distributed in the hope that it will be useful,
15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 # GNU General Public License for more details.
19 # You should have received a copy of the GNU General Public License
20 # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
24 # make all to compile and build Emacs.
25 # make install to install it.
26 # make TAGS to update tags tables.
28 # make clean or make mostlyclean
29 # Delete all files from the current directory that are normally
30 # created by building the program. Don't delete the files that
31 # record the configuration. Also preserve files that could be made
32 # by building, but normally aren't because the distribution comes
35 # Delete `.dvi' files here if they are not part of the distribution.
38 # Delete all files from the current directory that are created by
39 # configuring or building the program. If you have unpacked the
40 # source and built the program without creating any other files,
41 # `make distclean' should leave only the files that were in the
44 # make maintainer-clean
45 # Delete everything from the current directory that can be
46 # reconstructed with this Makefile. This typically includes
47 # everything deleted by distclean, plus more: .elc files,
48 # C source files produced by Bison, tags tables, info files,
52 # Still more severe - delete backup and autosave files, too.
55 # Removes all the compiled files to force a new bootstrap from a
56 # clean slate, and then build in the normal way.
59 # Make Emacs documentation files from their sources; requires makeinfo.
63 # This may not work with certain non-GNU make's. It only matters when
64 # inheriting a CDPATH not starting with the current directory.
67 # If Make doesn't predefine MAKE, set it here.
70 # Prevent submakes from outputting "Entering directory ..." and
71 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
72 QUIET_SUBMAKE
= MAKELEVEL
=0
74 # ==================== Things `configure' Might Edit ====================
76 cache_file
= @cache_file@
77 CONFIGURE_FLAGS
= --cache-file
=$(cache_file
)
85 ### These help us choose version- and architecture-specific directories
86 ### to install files in.
88 ### This should be the number of the Emacs version we're building,
89 ### like `18.59' or `19.0'.
92 ### This should be the name of the configuration we're building Emacs
93 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
94 configuration
=@configuration@
96 ### The nt/ subdirectory gets built only for MinGW
99 # ==================== Where To Install Things ====================
101 # Location to install Emacs.app under GNUstep / Mac OS X.
102 # Later values may use these.
103 ns_appbindir
=@ns_appbindir@
104 ns_appresdir
=@ns_appresdir@
105 # Either yes or no depending on whether this is a relocatable Emacs.app.
106 ns_self_contained
=@ns_self_contained@
108 # The default location for installation. Everything is placed in
109 # subdirectories of this directory. The default values for many of
110 # the variables below are expressed in terms of this one, so you may
111 # not need to change them. This defaults to /usr/local.
114 # Like `prefix', but used for architecture-specific files.
115 exec_prefix=@
exec_prefix@
117 # Where to install Emacs and other binaries that people will want to
118 # run directly (like etags).
121 # The root of the directory tree for read-only architecture-independent
122 # data files. ${datadir}, ${infodir} and ${mandir} are based on this.
123 datarootdir
=@datarootdir@
125 # Where to install architecture-independent data files. ${lispdir}
126 # and ${etcdir} are subdirectories of this.
129 # Where to install and expect the files that Emacs modifies as it
130 # runs. These files are all architecture-independent.
131 # Right now, this is not used.
132 sharedstatedir
=@sharedstatedir@
134 # Where to install and expect executable files to be run by Emacs
135 # rather than directly by users (and other architecture-dependent
136 # data, although Emacs does not have any). The executables
137 # are actually installed in ${archlibdir}, which is (normally)
138 # a subdirectory of this.
139 libexecdir
=@libexecdir@
141 # Where to install Emacs's man pages.
142 # Note they contain cross-references that expect them to be in section 1.
144 man1dir=$(mandir)/man1
146 # Where to install and expect the info files describing Emacs.
148 # Info files not in the doc/misc directory (we get those via make echo-info).
150 INFO_NONMISC
=emacs
$(INFO_EXT
) eintr
$(INFO_EXT
) elisp
$(INFO_EXT
)
152 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
153 HAVE_MAKEINFO
=@HAVE_MAKEINFO@
155 # Directory for local state files for all programs.
156 localstatedir
=@localstatedir@
158 # Where to look for bitmap files.
159 bitmapdir
=@bitmapdir@
161 # Where to find the source code. The source code for Emacs's C kernel is
162 # expected to be in ${srcdir}/src, and the source code for Emacs's
163 # utility programs is expected to be in ${srcdir}/lib-src. This is
164 # set by the configure script's `--srcdir' option.
166 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
169 # Where the manpage source files are kept.
170 mansrcdir
=$(srcdir)/doc
/man
172 # Tell make where to find source files; this is needed for the makefiles.
175 # Where to find the application default.
176 x_default_search_path
=@x_default_search_path@
178 # Where the etc/emacs.desktop file is to be installed.
179 desktopdir
=$(datarootdir
)/applications
181 # Where the etc/images/icons/hicolor directory is to be installed.
182 icondir
=$(datarootdir
)/icons
184 # The source directory for the icon files.
185 iconsrcdir
=$(srcdir)/etc
/images
/icons
187 # ==================== Emacs-specific directories ====================
189 # These variables hold the values Emacs will actually use. They are
190 # based on the values of the standard Make variables above.
192 # Where to install the lisp, leim files distributed with
193 # Emacs. This includes the Emacs version, so that the
194 # lisp files for different versions of Emacs will install
195 # themselves in separate directories.
199 # Directories Emacs should search for standard lisp files.
200 # The default is ${lispdir}:${leimdir}.
201 standardlisppath
=@standardlisppath@
203 # Directories Emacs should search for lisp files specific to this
204 # site (i.e. customizations), before consulting ${standardlisppath}.
205 # This should be a colon-separated list of directories.
206 locallisppath
=@locallisppath@
208 # Where Emacs will search to find its lisp files. Before
209 # changing this, check to see if your purpose wouldn't
210 # better be served by changing locallisppath. This
211 # should be a colon-separated list of directories.
212 # The default is ${locallisppath}:${standardlisppath}.
215 # Where Emacs will search for its lisp files while
216 # building. This is only used during the process of
217 # compiling Emacs, to help Emacs find its lisp files
218 # before they've been installed in their final location.
219 # This should be a colon-separated list of directories.
220 # Normally it points to the lisp/ directory in the sources.
221 buildlisppath
=${srcdir}/lisp
223 # Where to install the other architecture-independent
224 # data files distributed with Emacs (like the tutorial,
225 # the cookie recipes and the Zippy database). This path
226 # usually contains the Emacs version number, so the data
227 # files for multiple versions of Emacs may be installed
231 # Where to put executables to be run by Emacs rather than
232 # the user. This path usually includes the Emacs version
233 # and configuration name, so that multiple configurations
234 # for multiple versions of Emacs may be installed at
236 archlibdir
=@archlibdir@
238 # Where to put the docstring file.
241 # Where to install Emacs game score files.
244 # ==================== Utility Programs for the Build ====================
246 # Allow the user to specify the install program.
247 # Note that if the system does not provide a suitable install,
248 # configure will use build-aux/install-sh. Annoyingly, it does
249 # not use an absolute path. So we must take care to always run
250 # INSTALL-type commands from the directory containing the Makefile.
251 # This explains (I think) the cd thisdir seen in several install rules.
253 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
254 INSTALL_DATA
= @INSTALL_DATA@
255 INSTALL_INFO
= @INSTALL_INFO@
256 # By default, we uphold the dignity of our programs.
261 # We use gzip to compress installed .el files.
262 GZIP_PROG
= @GZIP_PROG@
263 # If non-nil, gzip the installed Info and man pages.
264 GZIP_INFO
= @GZIP_INFO@
266 # ============================= Targets ==============================
268 # Program name transformation.
269 TRANSFORM
= @program_transform_name@
271 # What emacs should be called when installed.
272 EMACS_NAME
= `echo emacs | sed '$(TRANSFORM)'`
273 EMACS
= ${EMACS_NAME}${EXEEXT}
274 EMACSFULL
= `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
276 # Subdirectories to make recursively.
277 SUBDIR
= $(NTDIR
) lib lib-src src lisp leim
279 # The subdir makefiles created by config.status.
280 SUBDIR_MAKEFILES_IN
= @SUBDIR_MAKEFILES_IN@
281 SUBDIR_MAKEFILES
= `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
283 # Subdirectories to install, and where they'll go. lib-src's and nt's
284 # makefiles know how to install them, so we don't do that here.
285 # Directories that cannot simply be copied, eg info, are treated
286 # separately. quail appears twice because in out-of-tree builds, it
288 COPYDIR
= ${srcdir}/etc
${srcdir}/lisp
${srcdir}/leim
/ja-dic
${srcdir}/leim
/quail leim
/quail
289 COPYDESTS
= $(DESTDIR
)${etcdir} $(DESTDIR
)${lispdir} $(DESTDIR
)${leimdir}/ja-dic
$(DESTDIR
)${leimdir}/quail
$(DESTDIR
)${leimdir}/quail
293 .PHONY
: all ${SUBDIR} blessmail epaths-force FRC
295 removenullpaths
=sed
-e
's/^://g' -e
's/:$$//g' -e
's/::/:/g'
297 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
298 # See comments in configure.ac for why it is done this way, as opposed
299 # to just letting configure generate epaths.h from epaths.in in a
300 # similar way to how Makefile is made from Makefile.in.
302 @
(standardlisppath
=`echo "${standardlisppath}" | ${removenullpaths}` ; \
303 locallisppath
=`echo "${locallisppath}" | ${removenullpaths}` ; \
304 buildlisppath
=`echo "${buildlisppath}" | ${removenullpaths}` ; \
305 x_default_search_path
=`echo ${x_default_search_path}`; \
306 gamedir
=`echo ${gamedir}`; \
307 sed
< ${srcdir}/src
/epaths.in
> epaths.h.
$$$$ \
308 -e
's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
309 -e
's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
310 -e
's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
311 -e
's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
312 -e
's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
313 -e
's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
314 -e
's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
315 -e
's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
316 -e
's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
317 -e
's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
318 ${srcdir}/build-aux
/move-if-change epaths.h.
$$$$ src
/epaths.h
320 lib-src src
: $(NTDIR
) lib
324 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
328 # These targets should be "${SUBDIR} without `src'".
329 lib lib-src lisp leim nt
: Makefile FRC
330 cd
$@
&& $(MAKE
) all $(MFLAGS
) \
331 CC
='${CC}' CFLAGS
='${CFLAGS}' CPPFLAGS
='${CPPFLAGS}' \
332 LDFLAGS
='${LDFLAGS}' MAKE
='${MAKE}'
334 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
335 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
336 # constructed yet) or the empty string (otherwise).
337 # src/Makefile.in uses it to implement conditional dependencies, so that
338 # files that need bootstrap-emacs to be built do not additionally need
339 # to be kept fresher than bootstrap-emacs. Otherwise changing a single
340 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
341 # all preloaded elisp files, and only then dump the actual src/emacs, which
342 # is not wrong, but is overkill in 99.99% of the cases.
344 boot
=bootstrap-emacs
$(EXEEXT
); \
345 if
[ ! -x
"src/$$boot" ]; then \
346 cd
$@
; $(MAKE
) all $(MFLAGS
) \
347 CC
='${CC}' CFLAGS
='${CFLAGS}' CPPFLAGS
='${CPPFLAGS}' \
348 LDFLAGS
='${LDFLAGS}' MAKE
='${MAKE}' BOOTSTRAPEMACS
="$$boot"; \
350 if
[ -r .bzr
/checkout
/dirstate
]; then \
351 vcswitness
="`pwd`/.bzr/checkout/dirstate"; \
353 cd
$@
; $(MAKE
) all $(MFLAGS
) \
354 CC
='${CC}' CFLAGS
='${CFLAGS}' CPPFLAGS
='${CPPFLAGS}' \
355 LDFLAGS
='${LDFLAGS}' MAKE
='${MAKE}' BOOTSTRAPEMACS
="" \
356 VCSWITNESS
="$$vcswitness"
358 blessmail
: Makefile src FRC
359 cd lib-src
&& $(MAKE
) maybe-blessmail
$(MFLAGS
) \
360 MAKE
='${MAKE}' archlibdir
='$(archlibdir)'
362 # We used to have one rule per */Makefile.in, but that leads to race
363 # conditions with parallel makes, so let's assume that the time stamp on
364 # ./Makefile is representative of the time stamp on all the other Makefiles.
366 # config.status overrides MAKEFILE_NAME with a bogus name when creating
367 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
368 # config.status and overwrite config.status while executing it (Bug#11214).
370 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
371 # then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
372 # etc. to be built without running into similar recursion problems.
373 MAKEFILE_NAME
= Makefile
374 $(MAKEFILE_NAME
): config.status
$(srcdir)/src
/config.in \
375 $(srcdir)/Makefile.in
$(SUBDIR_MAKEFILES_IN
) $(srcdir)/src
/lisp.mk
376 MAKE
='$(MAKE)' .
/config.status
378 # Don't erase these files if make is interrupted while refreshing them.
379 .PRECIOUS
: Makefile config.status
381 config.status
: ${srcdir}/configure
${srcdir}/lisp
/version.el
382 if
[ -x .
/config.status
]; then \
383 .
/config.status
--recheck
; \
385 $(srcdir)/configure
$(CONFIGURE_FLAGS
); \
388 AUTOCONF_INPUTS
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
390 $(srcdir)/configure
: $(AUTOCONF_INPUTS
)
391 cd
${srcdir} && autoconf
393 ACLOCAL_INPUTS
= $(srcdir)/m4
/gnulib-comp.m4
394 $(srcdir)/aclocal.m4
: $(ACLOCAL_INPUTS
)
395 cd
$(srcdir) && aclocal
-I m4
397 AUTOMAKE_INPUTS
= $(srcdir)/aclocal.m4
$(srcdir)/lib
/Makefile.am \
398 $(srcdir)/lib
/gnulib.mk
399 $(srcdir)/lib
/Makefile.in
: $(AUTOMAKE_INPUTS
)
400 cd
$(srcdir) && automake
--gnu
-a
-c lib
/Makefile
402 # Regenerate files that this makefile would have made, if this makefile
403 # had been built by Automake. The name 'am--refresh' is for
404 # compatibility with subsidiary Automake-generated makefiles.
405 am--refresh
: $(srcdir)/aclocal.m4
$(srcdir)/configure
$(srcdir)/src
/config.in
408 $(srcdir)/src
/config.in
: $(srcdir)/src
/stamp-h.in
409 @
# Usually, there's no need to rebuild src/config.in just
410 @
# because stamp-h.in has changed (since building stamp-h.in
411 @
# refreshes config.in as well), but if config.in is missing
412 @
# then we really need to do something more.
413 [ -r
"$@" ] ||
( cd
${srcdir} && autoheader
)
414 $(srcdir)/src
/stamp-h.in
: $(AUTOCONF_INPUTS
)
415 cd
${srcdir} && autoheader
416 rm -f
$(srcdir)/src
/stamp-h.in
417 echo timestamp
> $(srcdir)/src
/stamp-h.in
419 # ==================== Installation ====================
421 .PHONY
: install install-arch-dep install-arch-indep install-doc install-info
422 .PHONY
: install-man install-etc install-strip
uninstall
424 ## If we let lib-src do its own installation, that means we
425 ## don't have to duplicate the list of utilities to install in
426 ## this Makefile as well.
428 install: all install-arch-indep install-doc install-arch-dep blessmail
431 ## Ensure that $subdir contains a subdirs.el file.
432 ## Here and elsewhere, we set the umask so that any created files are
434 ## TODO it might be good to warn about non-standard permissions of
435 ## pre-existing directories, but that does not seem easy.
436 write_subdir
=if
[ -f
$${subdir}/subdirs.el
]; \
440 ${MKDIR_P} $${subdir}; \
441 (echo
"(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
442 echo
" (normal-top-level-add-subdirs-to-load-path))") \
443 > $${subdir}/subdirs.el
; \
446 ### Install the executables that were compiled specifically for this machine.
447 ### We do install-arch-indep first because the executable needs the
448 ### Lisp files and DOC file to work properly.
449 install-arch-dep
: src install-arch-indep install-doc
450 umask
022; ${MKDIR_P} $(DESTDIR
)${bindir}
452 $(MAKE
) install $(MFLAGS
) prefix=${prefix} \
453 exec_prefix=${exec_prefix} bindir=${bindir} \
454 libexecdir
=${libexecdir} archlibdir
=${archlibdir} \
455 INSTALL_STRIP
=${INSTALL_STRIP}
456 if
test "${ns_self_contained}" = "no"; then \
457 ${INSTALL_PROGRAM} $(INSTALL_STRIP
) src
/emacs
${EXEEXT} $(DESTDIR
)${bindir}/$(EMACSFULL
) || exit
1 ; \
458 chmod
1755 $(DESTDIR
)${bindir}/$(EMACSFULL
) || true
; \
459 if
test "x${NO_BIN_LINK}" = x
; then \
460 rm -f
$(DESTDIR
)${bindir}/$(EMACS
) ; \
461 cd
$(DESTDIR
)${bindir} && $(LN_S
) $(EMACSFULL
) $(EMACS
); \
464 subdir
=${ns_appresdir}/site-lisp
; \
465 ${write_subdir} || exit
1; \
466 rm -rf
${ns_appresdir}/share
; \
468 if
test "x$(NTDIR)" != "x"; then \
470 $(MAKE
) install $(MFLAGS
) prefix=${prefix} \
471 exec_prefix=${exec_prefix} bindir=${bindir} \
472 libexecdir
=${libexecdir} archlibdir
=${archlibdir} \
473 INSTALL_STRIP
=${INSTALL_STRIP}; \
476 ## In the share directory, we are deleting:
477 ## applications (with emacs.desktop, also found in etc/)
478 ## emacs (basically empty except for unneeded site-lisp directories)
479 ## icons (duplicates etc/images/icons/hicolor)
481 ## This is install-etc for everything except self-contained-ns builds.
482 ## For them, it is empty.
483 INSTALL_ARCH_INDEP_EXTRA
= @INSTALL_ARCH_INDEP_EXTRA@
485 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
486 ## Needs to be the user running install, so configure can't set it.
487 set_installuser
=for installuser in
$${LOGNAME} $${USERNAME} $${USER} \
488 `id -un 2> /dev/null`; do \
489 [ -n
"$${installuser}" ] && break
; \
492 ### Install the files that are machine-independent.
493 ### Most of them come straight from the distribution; the exception is
494 ### the DOC file, which is copied from the build directory.
496 ## We delete each directory in ${COPYDESTS} before we copy into it;
497 ## that way, we can reinstall over directories that have been put in
498 ## place with their files read-only (perhaps because they are checked
499 ## into RCS). In order to make this safe, we make sure that the
500 ## source exists and is distinct from the destination.
502 ## We delete etc/DOC* because there may be irrelevant DOC files from
503 ## other builds in the source directory. This is ok because we just
504 ## deleted the entire installed etc/ directory and recreated it.
505 ## install-doc installs the relevant DOC.
507 ## Note that the Makefiles in the etc directory are potentially useful
508 ## in an installed Emacs, so should not be excluded.
510 ## I'm not sure creating locallisppath here serves any useful purpose.
511 ## If it has the default value, then the later write_subdir commands
512 ## will ensure all these components exist.
513 ## This will only do something if locallisppath has a non-standard value.
514 ## Is it really Emacs's job to create those directories?
515 ## Should we also be ensuring they contain subdirs.el files?
516 ## It would be easy to do, just use write_subdir.
518 ## Note that we use tar instead of plain old cp -R/-r because the latter
519 ## is apparently not portable (even in 2012!).
520 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
521 ## I have no idea which platforms Emacs supports where cp -R does not
522 ## work correctly, and therefore no idea when tar can be replaced.
523 ## See also these comments from 2004 about cp -r working fine:
524 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
525 install-arch-indep
: lisp leim install-info install-man
${INSTALL_ARCH_INDEP_EXTRA}
527 locallisppath
='${locallisppath}'; \
529 for d in
$$locallisppath; do \
530 ${MKDIR_P} "$(DESTDIR)$$d"; \
532 -set
${COPYDESTS} ; \
534 $(set_installuser
); \
535 for
dir in
${COPYDIR} ; do \
536 [ -d
$${dir} ] || exit
1 ; \
539 [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
541 if
[ "$${dir}" = "leim/quail" ]; then \
542 [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
546 umask
022; ${MKDIR_P} $${dest} ; \
548 echo
"Copying $${dir} to $${dest}..." ; \
549 (cd
$${dir}; tar -chf
- .
) \
550 |
(cd
$${dest}; umask
022; \
551 tar -xvf
- && cat
> /dev
/null
) || exit
1; \
552 [ "$${dir}" != "${srcdir}/etc" ] ||
rm -f
$${dest}/DOC
* ; \
553 for subdir in
`find $${dest} -type d -print` ; do \
554 chmod a
+rx
$${subdir} ; \
555 rm -f
$${subdir}/.gitignore
; \
556 rm -f
$${subdir}/.arch-inventory
; \
557 rm -f
$${subdir}/.DS_Store
; \
558 rm -f
$${subdir}/\
#* ; \
559 rm -f
$${subdir}/.\
#* ; \
560 rm -f
$${subdir}/*~
; \
561 rm -f
$${subdir}/*.orig
; \
562 rm -f
$${subdir}/ChangeLog
* ; \
563 [ "$${dir}" != "${srcdir}/etc" ] && \
564 rm -f
$${subdir}/[mM
]akefile
*[.
-]in
$${subdir}/[mM
]akefile
; \
566 find
$${dest} -exec chown
$${installuser} {} ';' ;\
568 -rm -f
$(DESTDIR
)${leimdir}/leim-list.el
569 ${INSTALL_DATA} leim
/leim-list.el
$(DESTDIR
)${leimdir}/leim-list.el
570 -rm -f
$(DESTDIR
)${lispdir}/subdirs.el
571 umask
022; $(srcdir)/build-aux
/update-subdirs
$(DESTDIR
)${lispdir}
572 subdir
=$(DESTDIR
)${datadir}/emacs
/${version}/site-lisp
; \
574 subdir
=$(DESTDIR
)${datadir}/emacs
/site-lisp
; \
575 ${write_subdir} || true
576 [ -z
"${GZIP_PROG}" ] || \
577 ( echo
"Compressing *.el ..." ; \
579 thisdir
=`/bin/pwd`; \
580 for
dir in
$(DESTDIR
)${lispdir} $(DESTDIR
)${leimdir}; do \
582 cd
$${dir} || exit
1 ; \
583 for f in
`find . -name "*.elc" -print`; do \
584 ${GZIP_PROG} -9n
`echo $$f|sed 's/.elc$$/.el/'` ; \
587 -chmod
-R a
+r
$(DESTDIR
)${datadir}/emacs
/${version} ${COPYDESTS}
589 ## The above chmods are needed because "umask 022; tar ..." is not
590 ## guaranteed to do the right thing; eg if we are root and tar is
591 ## preserving source permissions.
593 ## We install only the relevant DOC file if possible
594 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
595 ## (Note "otherwise" is inaccurate since 2009-08-23.)
597 ## Note that install-arch-indep deletes and recreates the entire
598 ## installed etc/ directory, so we need it to run before this does.
599 install-doc
: src install-arch-indep
601 umask
022; ${MKDIR_P} $(DESTDIR
)${docdir} ; \
602 if
[ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
604 fullversion
=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
605 if
[ -f
"./etc/DOC-$${fullversion}" ]; \
607 docfile
="DOC-$${fullversion}"; \
611 echo
"Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
612 ${INSTALL_DATA} etc
/$${docfile} $(DESTDIR
)${docdir}/$${docfile}; \
613 $(set_installuser
); \
614 chown
$${installuser} $(DESTDIR
)${docdir}/$${docfile} || true
; \
618 umask
022; ${MKDIR_P} $(DESTDIR
)${infodir}
620 thisdir
=`/bin/pwd`; \
621 [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
622 (cd
$(DESTDIR
)${infodir}; \
625 ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR
)${infodir}/dir) ; \
626 info_misc
=`cd $${thisdir}/doc/misc && \
627 $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
629 cd
${srcdir}/info ; \
630 for elt in
${INFO_NONMISC} $${info_misc}; do \
631 test "$(HAVE_MAKEINFO)" = "no" && test ! -f
$$elt && continue
; \
632 for f in
`ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
634 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR
)${infodir}/$$f); \
635 ( [ -n
"${GZIP_INFO}" ] && [ -n
"${GZIP_PROG}" ] ) || continue
; \
636 rm -f
$(DESTDIR
)${infodir}/$$f.gz
; \
637 ${GZIP_PROG} -9n
$(DESTDIR
)${infodir}/$$f; \
640 ${INSTALL_INFO} --info-dir
=$(DESTDIR
)${infodir} $(DESTDIR
)${infodir}/$$elt); \
643 ## "gzip || true" is because some gzips exit with non-zero status
644 ## if compression would not reduce the file size. Eg, the gzip in
645 ## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
646 ## only happen with the tiny ctags.1 manpage. We don't really care if
647 ## ctags.1 is compressed or not. "gzip -f" is another option here,
648 ## but not sure if portable.
650 umask
022; ${MKDIR_P} $(DESTDIR
)${man1dir}
651 thisdir
=`/bin/pwd`; \
653 for page in
*.1; do \
654 dest
=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
656 ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR
)${man1dir}/$${dest}); \
657 ( [ -n
"${GZIP_INFO}" ] && [ -n
"${GZIP_PROG}" ] ) || continue
; \
658 rm -f
$(DESTDIR
)${man1dir}/$${dest}.gz
; \
659 ${GZIP_PROG} -9n
$(DESTDIR
)${man1dir}/$${dest} || true
; \
662 ## Install those items from etc/ that need to end up elsewhere.
664 ## If you prefer, choose "emacs22" at installation time.
665 ## Note: emacs22 does not have all the resolutions.
669 umask
022; ${MKDIR_P} $(DESTDIR
)${desktopdir}
670 tmp
=etc
/emacs.tmpdesktop
; rm -f
$${tmp}; \
671 emacs_name
=`echo emacs | sed '$(TRANSFORM)'`; \
672 sed
-e
"/^Exec=emacs/ s/emacs/$${emacs_name}/" \
673 -e
"/^Icon=emacs/ s/emacs/$${emacs_name}/" \
674 ${srcdir}/etc
/emacs.desktop
> $${tmp}; \
675 ${INSTALL_DATA} $${tmp} $(DESTDIR
)${desktopdir}/${EMACS_NAME}.desktop
; \
677 thisdir
=`/bin/pwd`; \
678 cd
${iconsrcdir} || exit
1; umask
022 ; \
679 for
dir in
*/*/apps
*/*/mimetypes
; do \
680 [ -d
$${dir} ] || continue
; \
681 ( cd
$${thisdir}; ${MKDIR_P} $(DESTDIR
)${icondir}/$${dir} ) ; \
682 for icon in
$${dir}/${EMACS_ICON}[.
-]*; do \
683 [ -r
$${icon} ] || continue
; \
684 ext
=`echo "$${icon}" | sed -e 's|.*\.||'`; \
685 dest
=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.
$${ext} ; \
687 ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR
)${icondir}/$${dir}/$${dest} ) \
692 ### Build Emacs and install it, stripping binaries while installing them.
694 $(MAKE
) $(MFLAGS
) INSTALL_STRIP
=-s
install
696 ### Delete all the installed files that the `install' target would
697 ### create (but not the noninstalled files such as `make all' would create).
699 ### Don't delete the lisp and etc directories if they're in the source tree.
702 $(MAKE
) $(MFLAGS
) uninstall \
703 prefix=${prefix} exec_prefix=${exec_prefix} \
704 bindir=${bindir} libexecdir
=${libexecdir} archlibdir
=${archlibdir}
706 if
test "x$(NTDIR)" != "x"; then \
708 $(MAKE
) $(MFLAGS
) uninstall \
709 prefix=${prefix} exec_prefix=${exec_prefix} \
710 bindir=${bindir} libexecdir
=${libexecdir} archlibdir
=${archlibdir}; \
713 for
dir in
$(DESTDIR
)${lispdir} $(DESTDIR
)${etcdir} ; do \
714 if
[ -d
$${dir} ]; then \
715 case
`cd $${dir} ; /bin/pwd` in \
716 `cd ${srcdir} ; /bin/pwd`* ) ;; \
717 * ) rm -rf
$${dir} ;; \
720 $(DESTDIR
)${datadir}/emacs
/${version}/* ) \
721 rm -rf
$(DESTDIR
)${datadir}/emacs
/${version} \
726 -rm -rf
$(DESTDIR
)${libexecdir}/emacs
/${version}
727 thisdir
=`/bin/pwd`; \
728 (info_misc
=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
729 if cd
$(DESTDIR
)${infodir}; then \
730 for elt in
${INFO_NONMISC} $${info_misc}; do \
732 $(INSTALL_INFO
) --remove
--info-dir
=$(DESTDIR
)${infodir} $(DESTDIR
)${infodir}/$$elt); \
733 if
[ -n
"${GZIP_INFO}" ] && [ -n
"${GZIP_PROG}" ]; then \
734 ext
=.gz
; else ext
=; fi
; \
735 rm -f
$$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
738 (if
[ -n
"${GZIP_INFO}" ] && [ -n
"${GZIP_PROG}" ]; then \
739 ext
=.gz
; else ext
=; fi
; \
740 if cd
${mansrcdir}; then \
741 for page in
*.1; do \
742 rm -f
$(DESTDIR
)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done
; \
744 (cd
$(DESTDIR
)${bindir} && rm -f
$(EMACSFULL
) $(EMACS
) || true
)
745 (if cd
$(DESTDIR
)${icondir}; then \
746 rm -f hicolor
/*x
*/apps
/${EMACS_NAME}.png \
747 hicolor
/scalable
/apps
/${EMACS_NAME}.svg \
748 hicolor
/scalable
/mimetypes
/`echo emacs-document | sed '$(TRANSFORM)'`.svg
; \
750 -rm -f
$(DESTDIR
)${desktopdir}/${EMACS_NAME}.desktop
751 for file in snake-scores tetris-scores
; do \
752 file
=$(DESTDIR
)${gamedir}/$${file}; \
753 [ -s
$${file} ] ||
rm -f
$$file; \
758 # ==================== Cleaning up and miscellanea ====================
760 .PHONY
: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
763 ### Like `clean', but may refrain from deleting a few files that people
764 ### normally don't want to recompile. For example, the `mostlyclean'
765 ### target for GCC does not delete `libgcc.a', because recompiling it
766 ### is rarely necessary and takes a lot of time.
768 (cd src
; $(MAKE
) $(MFLAGS
) mostlyclean)
769 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) mostlyclean)
770 (cd lwlib
; $(MAKE
) $(MFLAGS
) mostlyclean)
771 (cd lib
; $(MAKE
) $(MFLAGS
) mostlyclean)
772 (cd lib-src
; $(MAKE
) $(MFLAGS
) mostlyclean)
773 (cd nt
; $(MAKE
) $(MFLAGS
) mostlyclean)
774 -(cd doc
/emacs
&& $(MAKE
) $(MFLAGS
) mostlyclean)
775 -(cd doc
/misc
&& $(MAKE
) $(MFLAGS
) mostlyclean)
776 -(cd doc
/lispref
&& $(MAKE
) $(MFLAGS
) mostlyclean)
777 -(cd doc
/lispintro
&& $(MAKE
) $(MFLAGS
) mostlyclean)
778 (cd leim
; $(MAKE
) $(MFLAGS
) mostlyclean)
781 ### Delete all files from the current directory that are normally
782 ### created by building the program. Don't delete the files that
783 ### record the configuration. Also preserve files that could be made
784 ### by building, but normally aren't because the distribution comes
787 ### Delete `.dvi' files here if they are not part of the distribution.
789 -rm -f etc
/emacs.tmpdesktop
790 (cd src
; $(MAKE
) $(MFLAGS
) clean)
791 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) clean)
792 (cd lwlib
; $(MAKE
) $(MFLAGS
) clean)
793 (cd lib
; $(MAKE
) $(MFLAGS
) clean)
794 (cd lib-src
; $(MAKE
) $(MFLAGS
) clean)
795 (cd nt
; $(MAKE
) $(MFLAGS
) clean)
796 -(cd doc
/emacs
&& $(MAKE
) $(MFLAGS
) clean)
797 -(cd doc
/misc
&& $(MAKE
) $(MFLAGS
) clean)
798 -(cd doc
/lispref
&& $(MAKE
) $(MFLAGS
) clean)
799 -(cd doc
/lispintro
&& $(MAKE
) $(MFLAGS
) clean)
800 (cd leim
; $(MAKE
) $(MFLAGS
) clean)
801 (cd nextstep
&& $(MAKE
) $(MFLAGS
) clean)
804 ### Delete all files that need to be remade for a clean bootstrap.
806 rm -f config.cache config.log
808 ### Delete all files from the current directory that are created by
809 ### configuring or building the program. If you have unpacked the
810 ### source and built the program without creating any other files,
811 ### `make distclean' should leave only the files that were in the
815 rm -f config.status config.log~ Makefile stamp-h1
${SUBDIR_MAKEFILES}
817 (cd src
; $(MAKE
) $(MFLAGS
) distclean)
818 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) distclean)
819 (cd lwlib
; $(MAKE
) $(MFLAGS
) distclean)
820 (cd lib
; $(MAKE
) $(MFLAGS
) distclean)
821 (cd lib-src
; $(MAKE
) $(MFLAGS
) distclean)
822 (cd nt
; $(MAKE
) $(MFLAGS
) distclean)
823 (cd doc
/emacs
&& $(MAKE
) $(MFLAGS
) distclean)
824 (cd doc
/misc
&& $(MAKE
) $(MFLAGS
) distclean)
825 (cd doc
/lispref
&& $(MAKE
) $(MFLAGS
) distclean)
826 (cd doc
/lispintro
&& $(MAKE
) $(MFLAGS
) distclean)
827 (cd leim
; $(MAKE
) $(MFLAGS
) distclean)
828 (cd lisp
; $(MAKE
) $(MFLAGS
) distclean)
829 (cd nextstep
&& $(MAKE
) $(MFLAGS
) distclean)
832 ### `bootstrap-clean'
833 ### Delete everything that can be reconstructed by `make' and that
834 ### needs to be deleted in order to force a bootstrap from a clean state.
836 (cd src
; $(MAKE
) $(MFLAGS
) bootstrap-clean
)
837 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
838 (cd lwlib
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
839 (cd lib
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
840 (cd lib-src
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
841 (cd nt
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
842 -(cd doc
/emacs
&& $(MAKE
) $(MFLAGS
) maintainer-clean
)
843 -(cd doc
/misc
&& $(MAKE
) $(MFLAGS
) maintainer-clean
)
844 -(cd doc
/lispref
&& $(MAKE
) $(MFLAGS
) maintainer-clean
)
845 -(cd doc
/lispintro
&& $(MAKE
) $(MFLAGS
) maintainer-clean
)
846 (cd leim
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
847 (cd lisp
; $(MAKE
) $(MFLAGS
) bootstrap-clean
)
848 (cd nextstep
&& $(MAKE
) $(MFLAGS
) maintainer-clean
)
849 [ ! -f config.log
] || mv
-f config.log config.log~
852 ### `maintainer-clean'
853 ### Delete everything from the current directory that can be
854 ### reconstructed with this Makefile. This typically includes
855 ### everything deleted by distclean, plus more: C source files
856 ### produced by Bison, tags tables, info files, and so on.
858 ### One exception, however: `make maintainer-clean' should not delete
859 ### `configure' even if `configure' can be remade using a rule in the
860 ### Makefile. More generally, `make maintainer-clean' should not delete
861 ### anything that needs to exist in order to run `configure' and then
862 ### begin to build the program.
863 top_maintainer_clean
=\
865 rm -fr autom4te.cache
866 maintainer-clean
: bootstrap-clean FRC
867 (cd src
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
868 (cd lisp
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
869 ${top_maintainer_clean}
871 ### This doesn't actually appear in the coding standards, but Karl
872 ### says GCC supports it, and that's where the configuration part of
873 ### the coding standards seem to come from. It's like distclean, but
874 ### it deletes backup and autosave files too.
876 for i in
${SUBDIR}; do
(cd
$$i; $(MAKE
) $(MFLAGS
) extraclean
); done
877 ${top_maintainer_clean}
881 # The src subdir knows how to do the right thing
882 # even when the build directory and source dir are different.
884 TAGS
tags: lib lib-src src
885 cd src
; $(MAKE
) $(MFLAGS
) tags
888 @if
test ! -d
test/automated
; then \
889 echo
"You do not seem to have the test/ directory."; \
890 echo
"Maybe you are using a release tarfile, rather than a repository checkout."; \
892 cd
test/automated
&& $(MAKE
) $(MFLAGS
) check; \
896 cd
${srcdir}; .
/make-dist
898 DVIS
= lispref-dvi lispintro-dvi emacs-dvi misc-dvi
899 HTMLS
= lispref-html lispintro-html emacs-html misc-html
900 INFOS
= lispref-info lispintro-info emacs-info misc-info
901 PDFS
= lispref-pdf lispintro-pdf emacs-pdf misc-pdf
902 PSS
= lispref-ps lispintro-ps emacs-ps
# no misc-ps
904 DOCS
= $(DVIS
) $(HTMLS
) $(INFOS
) $(PDFS
) $(PSS
)
906 t
=$@
; IFS
=-; set
$$t; IFS
=; cd doc
/$$1 && $(MAKE
) $(MFLAGS
) $$2
908 .PHONY
: $(DOCS
) docs pdf ps
909 .PHONY
: info dvi dist check html info-real force-info check-info-dir
919 # Note that man/Makefile knows how to put the info files in $(srcdir),
920 # so we can do ok running make in the build dir.
921 # This used to have a clause that exited with an error if MAKEINFO = no.
922 # But it is inappropriate to do so without checking if makeinfo is
923 # actually needed - it is not if the info files are up-to-date. (Bug#3982)
924 # Only the doc/*/Makefiles can decide that, so we let those rules run
925 # and give a standard error if makeinfo is needed but missing.
926 # While it would be nice to give a more detailed error message, that
927 # would require changing every rule in doc/ that builds an info file,
928 # and it's not worth it. This case is only relevant if you download a
929 # release, then change the .texi files.
931 @if
test "$(HAVE_MAKEINFO)" = "no"; then \
932 echo
"Configured --without-makeinfo, not building manuals" ; \
934 $(MAKE
) $(MFLAGS
) info-real
; \
937 # The info/dir file must be updated by hand when new manuals are added.
942 test -f
"$${file}" || continue
; \
944 *-[0-9]*|COPYING|
dir) continue
;; \
946 file
=`echo $${file} | sed 's/\.info//'` ; \
947 grep
-q
-F
": ($${file})." dir || missing
="$${missing} $${file}" ; \
949 if
test -n
"$${missing}"; then \
950 echo
"Missing info/dir entries: $${missing}" ; \
953 echo
"info/dir is OK"
957 ### This first cleans the lisp subdirectory, removing all compiled
958 ### Lisp files. Then re-run make to build all the files anew.
962 # Bootstrapping does the following:
963 # * Remove files to start from a bootstrap-clean slate.
964 # * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
965 # * Rebuild Makefile, to update the build procedure itself.
966 # * Do the actual build.
967 bootstrap
: bootstrap-clean FRC
968 cd
$(srcdir) && { .
/autogen.sh || autogen
/copy_autogen
; }
969 $(MAKE
) $(MFLAGS
) MAKEFILE_NAME
=force-Makefile force-Makefile
970 $(MAKE
) $(MFLAGS
) info all
972 .PHONY
: check-declare
975 @if
[ ! -f
$(srcdir)/src
/emacs
]; then \
976 echo
"You must build Emacs to use this command"; \
979 (cd leim
; $(MAKE
) $(MFLAGS
) $@
)
980 (cd lisp
; $(MAKE
) $(MFLAGS
) $@
)