Clinton Ebadi [Wed, 9 Mar 2016 02:59:17 +0000 (21:59 -0500)]
z-axis: improved motor mount smooth rod holder
Since the inner area of the motor mount is cut out automatically now,
extend the support ring fully. This gives an even surface to sit on if
the rod is shifted outward.
Clinton Ebadi [Wed, 9 Mar 2016 02:53:51 +0000 (21:53 -0500)]
z-axis: add leadscrew delta and compute deltas
leadscrew and motor mount can be moved by zmotor_delta_{x,y} in order to
clear the bearing holder and x-axis smooth rods. This does not yet
affect the x-ends -- a new TR8 leadscrew x-end will use these.
Also compute the zaxis_delta and zmotor_delta automatically in
settings.scad. Only the aluminum extrusion frame adjusts these for now.
Clinton Ebadi [Sun, 28 Feb 2016 08:47:12 +0000 (03:47 -0500)]
z-axis: support position delta and improve rod support
zaxis_delta_y and zaxis_delta_x shift the entire z-axis away from the
frame. The Wilson TS frame moves the z-axis 5mm in x and y, and this
allows generating compatible z-axis parts. The 2020 frame benefits from
shifting the z-axis outward -- if it is not, the motor won't clear the
side of the mounts for the Wilson TS rear frame braces.
An additional support for the smooth rod hole is generated if the delta
is set. The motor mount walls are also removed if needed.
Clinton Ebadi [Wed, 24 Feb 2016 00:42:59 +0000 (19:42 -0500)]
z-axis support for aluminum extrusion frame
Also makes the rod holder insert a bit stronger.
Clinton Ebadi [Mon, 22 Feb 2016 00:53:58 +0000 (19:53 -0500)]
frame_alu: Use M5 bolt holes
Clinton Ebadi [Sun, 21 Feb 2016 19:25:03 +0000 (14:25 -0500)]
Generalize `i_am_box' into `frame_type' option
This will be used to add support for a 2020 aluminum extrusion z-axis.
Václav 'ax' Hůla [Mon, 26 Jan 2015 23:10:49 +0000 (00:10 +0100)]
Merge pull request #91 from lordofhyphens/amf_export
simple makefile change to allow for easy output of AMF or STL
Joseph Lenox [Tue, 20 Jan 2015 23:12:11 +0000 (17:12 -0600)]
Added configuration option to output AMF or STL files based on the initial output.
Defaults to STL.
Václav 'Ax' Hůla [Mon, 22 Dec 2014 14:54:04 +0000 (15:54 +0100)]
Issue #89 workaround
Václav 'ax' Hůla [Wed, 26 Feb 2014 10:23:19 +0000 (11:23 +0100)]
Merge pull request #84 from blackguest/master
Add endstop-holder-extra.scad for rotating endstops 90 degress on origin...
ethan.sherman [Tue, 25 Feb 2014 16:50:50 +0000 (10:50 -0600)]
Add endstop-holder-extra.scad for rotating endstops 90 degress on original endstop-holder.
Václav 'Ax' Hůla [Sun, 5 Jan 2014 16:18:44 +0000 (17:18 +0100)]
Merge branch 'master' of git://github.com/Thav/Prusa3 into Thav-master
Conflicts:
box_frame/sample_stls/default_box_gt2_lm8uu/configuration.scad
box_frame/sample_stls/default_box_htd3_lm8uu/configuration.scad
box_frame/sample_stls/single_plate_htd3_lm8uu/configuration.scad
Václav 'ax' Hůla [Tue, 24 Dec 2013 22:28:19 +0000 (14:28 -0800)]
Merge pull request #80 from AxTheB/master
Config update, some refactoring, bearing guide fixes. sample stl change
Václav 'Ax' Hůla [Tue, 24 Dec 2013 22:07:59 +0000 (23:07 +0100)]
Config update, some refactoring, bearing guide fixes.
Thav [Mon, 28 Oct 2013 11:38:26 +0000 (07:38 -0400)]
Updating quantities based on manual.txt
Thav [Mon, 28 Oct 2013 11:13:04 +0000 (07:13 -0400)]
Getting ThingDoc output to first unbroken state
Thav [Mon, 28 Oct 2013 10:46:35 +0000 (06:46 -0400)]
Adding basic ThingDoc entries for printed parts
Thav [Mon, 28 Oct 2013 10:45:53 +0000 (06:45 -0400)]
Creating skeleton for top level ThingDoc assembly
Thav [Sat, 26 Oct 2013 15:41:28 +0000 (11:41 -0400)]
Changing repository link in comments to correct Github URL.
Thav [Sat, 26 Oct 2013 15:30:52 +0000 (11:30 -0400)]
Fixed a comment that was making thingdoc throw an error
Václav 'ax' Hůla [Tue, 15 Oct 2013 10:07:31 +0000 (03:07 -0700)]
Merge pull request #76 from AxTheB/master
Move bearing guide so it does not interfere with other models
Václav 'Ax' Hůla [Tue, 15 Oct 2013 10:05:21 +0000 (12:05 +0200)]
Move bearing guide so it does not interfere with other models
Václav 'ax' Hůla [Tue, 15 Oct 2013 08:12:09 +0000 (01:12 -0700)]
Merge pull request #75 from AxTheB/master
Fiddled with wade a bit to fix #66
Václav 'Ax' Hůla [Tue, 15 Oct 2013 08:06:52 +0000 (10:06 +0200)]
Fiddled with wade a bit to fix #66
Václav 'ax' Hůla [Fri, 11 Oct 2013 16:23:05 +0000 (09:23 -0700)]
Merge pull request #73 from AxTheB/master
Bearing guide changes and new samples
Václav 'Ax' Hůla [Fri, 11 Oct 2013 16:10:14 +0000 (18:10 +0200)]
regenerate sample stls
Václav 'Ax' Hůla [Fri, 11 Oct 2013 15:51:30 +0000 (17:51 +0200)]
Bearing guide fixes, new sample stls.
Václav 'ax' Hůla [Fri, 11 Oct 2013 15:31:14 +0000 (08:31 -0700)]
Merge pull request #72 from AxTheB/master
Fix for wade brushing against the carriage
Václav 'Ax' Hůla [Fri, 11 Oct 2013 15:23:34 +0000 (17:23 +0200)]
Fix for wade brushing against the carriage
Václav 'ax' Hůla [Tue, 17 Sep 2013 23:46:13 +0000 (16:46 -0700)]
Merge pull request #71 from AxTheB/master
Add script to recompile all samples, update samples
Václav 'Ax' Hůla [Sun, 8 Sep 2013 13:28:11 +0000 (15:28 +0200)]
Add script to recompile all samples, update samples
Václav 'ax' Hůla [Sun, 8 Sep 2013 11:28:39 +0000 (04:28 -0700)]
Merge pull request #70 from AxTheB/master
Some verbose comments in config file
Václav 'Ax' Hůla [Sun, 8 Sep 2013 11:26:25 +0000 (13:26 +0200)]
Merge branch 'master' of github.com:josefprusa/Prusa3
Conflicts:
box_frame/configuration.scad.dist
Václav 'Ax' Hůla [Sun, 8 Sep 2013 11:20:04 +0000 (13:20 +0200)]
Updated comments
Václav 'ax' Hůla [Wed, 28 Aug 2013 08:29:17 +0000 (01:29 -0700)]
Merge pull request #68 from apapdev007/revised-config-comments
Revised Config Comments
appdev007 [Tue, 27 Aug 2013 11:53:24 +0000 (06:53 -0500)]
Removed the GT2 belt settings that I added to old_single_plate config on my last commit. They won't print because this part prints flat.
Václav 'ax' Hůla [Tue, 27 Aug 2013 09:15:42 +0000 (02:15 -0700)]
Merge pull request #67 from apapdev007/new-config-comments
Config File Comments for Noobs
appdev007 [Tue, 27 Aug 2013 02:53:23 +0000 (21:53 -0500)]
Added comments to the config files to, hopefully, make it a little easier on less experienced users. Also copied the GT2 belt settings from box_frame config to the config in old_single_plate.
Václav 'Ax' Hůla [Tue, 20 Aug 2013 12:49:53 +0000 (14:49 +0200)]
Revert "Revert "reduced size to make holes line up with the single plate y-axis""
This reverts commit
b4e11bc29a4aba2d82bc6a3b8662d0fa19c7b64b.
Václav 'Ax' Hůla [Tue, 20 Aug 2013 12:48:53 +0000 (14:48 +0200)]
Revert "Revert "Add top level readme, rename single_plate""
This reverts commit
95140cadf24150998e2d8bfc8d606cb4c10ad7e6.
Josef Prusa [Wed, 7 Aug 2013 08:21:01 +0000 (10:21 +0200)]
Revert "Add top level readme, rename single_plate"
This reverts commit
2c389bb9f6006c2f19f0acc58b8cd7fa9adfda2e.
Josef Prusa [Wed, 7 Aug 2013 08:21:01 +0000 (10:21 +0200)]
Revert "reduced size to make holes line up with the single plate y-axis"
This reverts commit
db8feef4a33dc2cf013e9d42578992d8470a5aa4.
Joachim Glauche [Thu, 25 Jul 2013 11:27:08 +0000 (13:27 +0200)]
reduced size to make holes line up with the single plate y-axis
Václav 'Ax' Hůla [Mon, 15 Jul 2013 21:26:16 +0000 (23:26 +0200)]
Add top level readme, rename single_plate
Václav 'ax' Hůla [Thu, 27 Jun 2013 15:38:00 +0000 (08:38 -0700)]
Merge pull request #65 from AxTheB/master
small dimensions.md fix
Václav 'Ax' Hůla [Thu, 27 Jun 2013 15:34:13 +0000 (17:34 +0200)]
Missing word in dimensions.md
Václav 'ax' Hůla [Mon, 17 Jun 2013 08:52:25 +0000 (01:52 -0700)]
Merge pull request #64 from AxTheB/master
Bearing guide bugfix, polyhole removal
Václav 'Ax' Hůla [Mon, 17 Jun 2013 08:33:03 +0000 (10:33 +0200)]
Remove polyhole
Václav 'Ax' Hůla [Sun, 16 Jun 2013 14:10:39 +0000 (16:10 +0200)]
Merge branch 'master' of github.com:josefprusa/Prusa3
Václav 'Ax' Hůla [Sun, 16 Jun 2013 14:07:08 +0000 (16:07 +0200)]
Bugfix: xends and bearing guides no longer intersect
Joachim Glauche [Sat, 15 Jun 2013 16:55:09 +0000 (18:55 +0200)]
suggest to use 20mm 'board_thickness' when using single plate + y lm8uu holders
Joachim Glauche [Sat, 15 Jun 2013 16:52:35 +0000 (18:52 +0200)]
apply small_hole_segments to stepper motor mount
Václav 'Ax' Hůla [Fri, 7 Jun 2013 07:56:48 +0000 (09:56 +0200)]
wade gears now pass reality check
Václav 'Ax' Hůla [Wed, 5 Jun 2013 22:31:28 +0000 (00:31 +0200)]
Merge branch 'master' of github.com:josefprusa/Prusa3
Václav 'Ax' Hůla [Wed, 5 Jun 2013 22:28:30 +0000 (00:28 +0200)]
Fix missing tensioner
Václav 'ax' Hůla [Wed, 5 Jun 2013 20:51:26 +0000 (13:51 -0700)]
Merge pull request #62 from AxTheB/master
New STLs (and a endstop holder)
Václav 'Ax' Hůla [Wed, 5 Jun 2013 20:45:22 +0000 (22:45 +0200)]
Merge branch 'master' of github.com:josefprusa/Prusa3
Václav 'Ax' Hůla [Wed, 5 Jun 2013 20:44:06 +0000 (22:44 +0200)]
Regenerate sample STLs to march current sources
Joachim Glauche [Wed, 5 Jun 2013 16:53:40 +0000 (18:53 +0200)]
use m3_diameter_horizontal for nut trap in idler
Václav 'Ax' Hůla [Wed, 5 Jun 2013 09:49:46 +0000 (11:49 +0200)]
Add endstop holing ability to tube clamps
Václav 'Ax' Hůla [Wed, 5 Jun 2013 09:36:20 +0000 (11:36 +0200)]
Merge branch 'tube-clamp'
Václav 'ax' Hůla [Wed, 5 Jun 2013 09:24:09 +0000 (02:24 -0700)]
Merge pull request #61 from AxTheB/master
Fixes (mainly xends)
Václav 'Ax' Hůla [Wed, 5 Jun 2013 09:18:31 +0000 (11:18 +0200)]
Mirror x-ends to reflect current state
Václav 'Ax' Hůla [Tue, 4 Jun 2013 17:49:19 +0000 (19:49 +0200)]
Merge branch 'master' of github.com:josefprusa/Prusa3
Conflicts:
box_frame/doc/dimensions.md
Václav 'Ax' Hůla [Tue, 4 Jun 2013 17:20:39 +0000 (19:20 +0200)]
Fix smooth rod dimensions
Václav 'ax' Hůla [Thu, 30 May 2013 08:48:08 +0000 (01:48 -0700)]
Merge pull request #58 from AxTheB/master
Fix expensive typo (rod length)
Václav 'Ax' Hůla [Thu, 30 May 2013 08:46:14 +0000 (10:46 +0200)]
Fix expensive typo (rtod length)
Václav 'Ax' Hůla [Sun, 26 May 2013 09:49:03 +0000 (11:49 +0200)]
Add 12mm bushing variant to config file
Václav 'Ax' Hůla [Sun, 26 May 2013 09:47:15 +0000 (11:47 +0200)]
Make bigger hole for M5 rod
Václav 'Ax' Hůla [Sat, 25 May 2013 21:56:39 +0000 (23:56 +0200)]
Remove #
Václav 'Ax' Hůla [Tue, 21 May 2013 22:25:19 +0000 (00:25 +0200)]
Add endstop holder to tube clamp
Václav 'ax' Hůla [Fri, 17 May 2013 22:17:11 +0000 (15:17 -0700)]
Merge pull request #57 from AxTheB/master
Carriage length fix, chamfer
Joachim Glauche [Thu, 16 May 2013 18:19:28 +0000 (20:19 +0200)]
more tweaks on the nut slide in. does slide in with little force now
Joachim Glauche [Wed, 15 May 2013 08:16:21 +0000 (10:16 +0200)]
fix securing nut placement as well
Joachim Glauche [Wed, 15 May 2013 08:10:46 +0000 (10:10 +0200)]
fixed opening size
Joachim Glauche [Tue, 14 May 2013 08:42:40 +0000 (10:42 +0200)]
now real commit for y-beltholder fix on single plate
Joachim Glauche [Tue, 14 May 2013 08:41:54 +0000 (10:41 +0200)]
tightener nut trap fix (partially accidentally pushed in commit
8dd487109dd5c02620e4bd28d2258375727832c3)
Joachim Glauche [Tue, 14 May 2013 08:39:05 +0000 (10:39 +0200)]
added small_hole_segments to bushing.scad as well
Joachim Glauche [Tue, 14 May 2013 08:38:14 +0000 (10:38 +0200)]
fixed last commit for single plate
Joachim Glauche [Tue, 14 May 2013 08:34:02 +0000 (10:34 +0200)]
fixed belt holder screw spacing to the y-platform, make 3,5x20 not go through the plate
Václav 'Ax' Hůla [Tue, 14 May 2013 07:59:00 +0000 (09:59 +0200)]
Merge branch 'master' of github.com:josefprusa/Prusa3
Václav 'Ax' Hůla [Tue, 14 May 2013 07:57:05 +0000 (09:57 +0200)]
Add option to use chamfered endes instead of bevels
Joachim Glauche [Mon, 13 May 2013 16:45:10 +0000 (18:45 +0200)]
added small_hole_segments to bushing and x-carriage as well
Joachim Glauche [Mon, 13 May 2013 16:34:23 +0000 (18:34 +0200)]
make number of segments configurable on small holes
Václav 'Ax' Hůla [Fri, 10 May 2013 08:52:59 +0000 (10:52 +0200)]
The x-carriage will now grow to size of 2 bearings for bearings <= 30mm
Václav 'Ax' Hůla [Fri, 10 May 2013 08:28:00 +0000 (10:28 +0200)]
optional endstop holder on tube clamp, initial idea
Joachim Glauche [Thu, 9 May 2013 09:53:12 +0000 (11:53 +0200)]
fix 624 idler bearing spacing
Joachim Glauche [Tue, 7 May 2013 18:52:47 +0000 (20:52 +0200)]
made endstop holder parameteric and produce the correct ones according to smooth rod size
Joachim Glauche [Tue, 7 May 2013 18:40:48 +0000 (20:40 +0200)]
copied endstop-holder from restructure branch, prusa i2 repository
Václav 'ax' Hůla [Mon, 6 May 2013 13:11:11 +0000 (06:11 -0700)]
Merge pull request #55 from AxTheB/master
Fix for Xend and skate bearings
Václav 'Ax' Hůla [Mon, 6 May 2013 13:08:19 +0000 (15:08 +0200)]
Let the X tensioner grow for larger bearings
Václav 'ax' Hůla [Fri, 3 May 2013 07:55:21 +0000 (00:55 -0700)]
Merge pull request #54 from AxTheB/master
Fix xends for bushings
Václav 'Ax' Hůla [Tue, 30 Apr 2013 13:05:36 +0000 (15:05 +0200)]
Fixes for 10mm bushings
Václav 'ax' Hůla [Tue, 30 Apr 2013 11:24:40 +0000 (04:24 -0700)]
Merge pull request #53 from AxTheB/master
More STLs and bit of cleaning.
Václav 'Ax' Hůla [Tue, 30 Apr 2013 10:14:40 +0000 (12:14 +0200)]
Rename conf_b_bronze to conf_b_bronze_8
Václav 'Ax' Hůla [Mon, 29 Apr 2013 20:43:38 +0000 (22:43 +0200)]
Add calibrating test and clamp on all sample sets
Václav 'Ax' Hůla [Mon, 29 Apr 2013 20:38:34 +0000 (22:38 +0200)]
Change x-end nut trap from slot to hex insert
Václav 'Ax' Hůla [Mon, 29 Apr 2013 20:36:35 +0000 (22:36 +0200)]
Reorder conf_bushing, rename conf_b_igus to conf_b_bushing8
Václav 'Ax' Hůla [Mon, 29 Apr 2013 20:32:51 +0000 (22:32 +0200)]
Make some clamps in right dimensions
Václav 'Ax' Hůla [Mon, 29 Apr 2013 10:56:09 +0000 (12:56 +0200)]
More sample stls