// r is outer bushing radius needed for tight fit or bearing radius with loose fit [1]
// h is barrel length [2]
// type is 0 for linear bearings, 1 is for bushings which needs to be enclosed fully. [3]
-// is it alo assumed that type 1 has flange and type 0 has not
+// type 1 may have flange, but type 0 not
// name is human readable name [4]
-conf_b_igus = [4, 5.1, 10, 1, "igus J(V)FM 0810-10 or GFM 0810-10"];
-conf_b_lm8uu = [4, 7.7, 24, 0, "lm8uu bearing (standard)"];
+//bushings
+conf_b_bushing8 = [4, 5.1, 10, 1, "Tube shaped bushing like igus J(V)FM 0810-10"];
+conf_b_bushing10 = [5, 6.1, 10, 1, "Tube shaped bushing with id=10mm, od=12mm and length of at least 10mm, like J(V)FM 1012-10"];
-conf_b_igus10 = [5, 6.1, 10, 1, "igus J(V)FM 1012-10"];
-conf_b_lm10uu = [5, 9.7, 29, 0, "lm10uu bearing (10mm smooth rod)"];
-conf_b_lm10luu = [5, 9.7, 55, 0, "lm10luu bearing (10mm smooth rod, long)"];
+conf_b_bronze = [4, 8, 11, 1, "bronze self-aligning bushing, 8mm"];
+//shorter beaings (two on each Z axis)
+conf_b_lm8uu = [4, 7.7, 24, 0, "lm8uu bearing (standard)"];
+conf_b_lm10uu = [5, 9.7, 29, 0, "lm10uu bearing (10mm smooth rod)"];
conf_b_lme8uu =[4, 8.2, 25, 0, "lme8uu bearing"];
-conf_b_lm8luu = [4, 7.7, 45, 0, "lm8luu bearing (double length)"];
-conf_b_bronze = [4, 8, 11, 1, "bronze self-aligning bushing, 8mm"];
conf_b_lm12uu = [6, 10.6, 30, 0, "lm12uu bearing (12mm smooth rod)"];
+
+//longer bearings
+conf_b_lm8luu = [4, 7.7, 45, 0, "lm8luu bearing (double length)"];
+conf_b_lm10luu = [5, 9.7, 55, 0, "lm10luu bearing (10mm smooth rod, long)"];
conf_b_lm12luu = [6, 10.6, 57, 0, "lm12luu bearing (12mm, double length)"];