2 # Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
3 # Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
4 # This code is hereby licensed for public consumption under either the
5 # GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
7 # You should have received a copy of the GNU General Public License along
8 # with this program; if not, write to the Free Software Foundation, Inc.,
9 # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
11 # Copyright for this work is to expire January 1, 2010, after which it
12 # shall be public domain.
20 echo "This is abcde v$VERSION."
21 echo "Usage: abcde [options] [tracks]"
23 echo "-1 Encode the whole CD in a single file"
24 echo "-a <action1[,action2]...>"
25 echo " Actions to perform:"
26 echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
27 #echo "-A Experimental actions (retag, transcode)"
28 echo "-b Enable batch normalization"
29 #echo "-B Disable batch replaygain (do file by file)"
31 echo " Specify a configuration file (overrides system and user config files)"
33 echo " Specify discid to resume from (only needed if you no longer have the cd)"
35 echo " Specify CDROM device to grab (flac uses a single-track flac file)"
36 echo "-D Debugging mode (equivalent to sh -x abcde)"
37 echo "-e Erase encoded track information from status file"
38 echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
39 echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
40 echo "-h This help information"
41 #echo "-i Tag files while encoding, when possible (local only) -NWY-"
42 echo "-j <#> Number of encoder processes to run at once (localhost)"
43 echo "-k Keep the wav tracks for later use"
44 echo "-l Use low disk space algorithm"
45 echo "-L Use local CDDB storage directory"
46 echo "-n No lookup. Don't query CDDB, just create and use template"
47 echo "-N Noninteractive. Never prompt for anything"
48 echo "-m Modify playlist to include CRLF endings, to comply with some players"
49 echo " WARNING: Deprecated. Use \"cue\" action"
50 #echo "-M Create a CUE file"
51 echo "-o <type1[,type2]...>"
52 echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
53 echo "-p Pad track numbers with 0's (if less than 10 tracks)"
54 echo "-P Use UNIX pipes to read+encode without wav files"
56 echo " Set quality level (high,medium,low)"
57 echo "-r <host1[,host2]...>"
58 echo " Also encode on these remote hosts"
59 echo "-R Use local CDDB in recursive mode"
61 echo " Show fields from the CDDB info (year,genre)"
62 echo "-S <#> Set the CD speed"
63 echo "-t <#> Start the track numbering at a given number"
64 echo "-T <#> Same as -t but modifies tag numbering"
65 echo "-U Do NOT use UNICODE (UTF8) tags and comments"
66 echo "-v Show version number and exit"
67 echo "-V Be a bit more verbose about what is happening behind the scenes"
68 echo "-x Eject CD after all tracks are read"
70 echo " Add a comment to the CD tracks"
71 echo "-W <#> Concatenate CDs: -T #01 -w \"CD #\""
72 echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
74 echo "Tracks is a space-delimited list of tracks to grab."
75 echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
77 #echo "Double hyphens are used to concatenate tracks"
82 echo "$@" >> "$ABCDETEMPDIR/status"
85 # log [level] [message]
87 # log outputs the right message in a common format
93 error
) echo "[ERROR] abcde: $@" >&2 ;;
94 warning
) echo "[WARNING] $@" >&2 ;;
95 info
) echo "[INFO] $@" ;;
99 # Funtions to replace the need of seq, which is too distribution dependant.
103 while [ $i -ne `expr $2 + 1` ]
113 if echo $i |
grep "[[:digit:]]" > /dev
/null
2>&1 ; then
114 while [ $i -ne `expr $2 + 1` ]
121 log error
"syntax error while processing track numbers"
126 # Functions to replace the need of awk {print $1} and {print $NF}
129 if [ X
"$1" = "X" ]; then
130 for first
in `cat`; do
141 if [ X
"$1" = "X" ]; then
142 for stdin
in `cat`; do
146 for last
in $@
; do :; done
151 # checkstatus [blurb]
152 # Returns "0" if the blurb was found, returns 1 if it wasn't
153 # Puts the blurb content, if available, on stdout.
154 # Otherwise, returns "".
157 # Take the last line in the status file if there's multiple matches
159 BLURB
=$
(egrep $PATTERN "$ABCDETEMPDIR/status" |
tail -n 1)
161 if [ -z "$BLURB" ]; then
166 # See if there's a = in it
167 if [ "$(echo $BLURB | grep -c =)" != "0" ]; then
168 echo "$(echo $BLURB | cut -f2- -d=)"
174 # checkwarnings [blurb]
175 # Returns "0" if the blurb was found (meaning there was an warning),
176 # returns 1 if it wasn't (yes this is a little backwards).
177 # Does not print the blurb on stdout.
178 # Otherwise, returns "".
181 if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
184 # Take the last line in the status file if there's multiple matches
186 BLURB
="$(egrep $PATTERN "$ABCDETEMPDIR/warnings
" | tail -n 1)"
188 if [ -z "$BLURB" ]; then
189 # negative, we did not have a negative...
192 # affirmative, we had a negative...
197 # checkerrors [blurb]
198 # Returns "0" if the blurb was found (meaning there was an error),
199 # returns 1 if it wasn't (yes this is a little backwards).
200 # Does not print the blurb on stdout.
201 # Otherwise, returns "".
204 if [ -e "$ABCDETEMPDIR/errors" ]; then :; else
207 # Take the last line in the status file if there's multiple matches
209 BLURB
="$(egrep $PATTERN "$ABCDETEMPDIR/errors
" | tail -n 1)"
211 if [ -z "$BLURB" ]; then
212 # negative, we did not have a negative...
215 # affirmative, we had a negative...
221 # Finds the right pager in the system to display a file
225 # Use the debian sensible-pager wrapper to pick the pager
226 # user has requested via their $PAGER environment variable
227 if [ -x "/usr/bin/sensible-pager" ]; then
228 /usr
/bin
/sensible-pager
"$PAGEFILE"
229 elif [ -x "$PAGER" ]; then
230 # That failed, try to load the preferred editor, starting
231 # with their PAGER variable
233 # If that fails, check for less
234 elif [ -x /usr
/bin
/less ]; then
235 /usr
/bin
/less -f "$PAGEFILE"
236 # more should be on all UNIX systems
237 elif [ -x /bin
/more ]; then
238 /bin
/more "$PAGEFILE"
240 # No bananas, just cat the thing
245 # run_command [blurb] [command...]
246 # Runs a command, silently if necessary, and updates the status file
251 # See if this is supposed to be silent
252 if [ "$(checkstatus encode-output)" = "loud" ]; then
256 # Special case for SMP, since
257 # encoder output is never displayed, don't mute echos
258 if [ -z "$BLURB" -a "$MAXPROCS" != "1" ]; then
267 normalize|normalize-audio
)
268 if [ "$RETURN" = "2" ]; then
269 # File was already normalized.
274 if [ "$RETURN" != "0" ]; then
275 # Put an error in the errors file. For various reasons we
276 # can't capture a copy of the program's output but we can
277 # log what we attempted to execute and the error code
278 # returned by the program.
279 if [ "$BLURB" ]; then
282 echo "${TWEAK}returned code $RETURN: $@" >> "$ABCDETEMPDIR/errors"
283 return $RETURN # Do not pass go, do not update the status file
285 if [ "$BLURB" ]; then
286 echo $BLURB >> "$ABCDETEMPDIR/status"
290 # relpath() and slash() are Copyright (c) 1999 Stuart Ballard and
291 # distributed under the terms of the GNU GPL v2 or later, at your option
293 # Function to determine if a word contains a slash.
302 # Function to give the relative path from one file to another.
303 # Usage: relpath fromfile tofile
304 # eg relpath music/Artist/Album.m3u music/Artist/Album/Song.mp3
305 # (the result would be Album/Song.mp3)
306 # Output is relative path to $2 from $1 on stdout
308 # This code has the following restrictions:
309 # Multiple ////s are not collapsed into single /s, with strange effects.
310 # Absolute paths and ../s are handled wrong in FR (but they work in TO)
311 # If FR is a directory it must have a trailing /
319 /*) ;; # No processing is needed for absolute paths
321 # Loop through common prefixes, ignoring them.
322 while slash
"$FR" && [ "$(echo "$FR" | cut -d/ -f1)" = "$(echo "$TO" | cut -d/ -f1)" ]
324 FR
="$(echo "$FR" | cut -d/ -f2-)"
325 TO
="$(echo "$TO" | cut -d/ -f2-)"
327 # Loop through directory portions left in FR, adding appropriate ../s.
330 FR
="$(echo "$FR" | cut -d/ -f2-)"
341 if [ ! "$@" = "" ]; then
342 # Cut off any command-line option we added in
343 X
=$
(echo $@ | cut
-d' ' -f2)
344 if [ "$(which $X)" = "" ]; then
346 elif [ ! -x $
(which $X) ]; then
355 if [ ! "$@" = "" ]; then
356 # Cut off any command-line option we added in
357 X
=$
(echo $@ | cut
-d' ' -f2)
358 # Test for built-in abcde.function
359 [ "$X" != "${X#abcde.}" ] && type $X >/dev
/null
2>&1 && return
360 if [ "$(which $X)" = "" ]; then
361 log error
"$X is not in your path." >&2
362 log info
"Define the full path to the executable if it exists on your system." >&2
363 if [ -e /etc
/debian_release
] ; then
365 oggenc
) MISSING_PACKAGE
=vorbis-tools
;;
366 lame|flac
) MISSING_PACKAGE
=$X ;;
368 log info
"Hint: apt-get install $MISSING_PACKAGE" >&2
371 elif [ ! -x "$(which $X)" ]; then
372 log error
"$X is not executable." >&2
378 # diffentries <filename> <max_value> <entry1>,<entry2>
379 # max_value: the range of entries goes from 1 to <max_value>
384 local CDDBDIFFCHOICES
=$1
386 local CDDBDIFFCHOICE
="$@"
387 if [ ! X
"$DIFF" = "X" ]; then
388 PARSECHOICE1
=$
(echo $CDDBDIFFCHOICE | cut
-d"," -f1 |
xargs printf %d
2>/dev
/null
)
389 PARSECHOICE2
=$
(echo $CDDBDIFFCHOICE | cut
-d"," -f2 |
xargs printf %d
2>/dev
/null
)
390 if [ $PARSECHOICE1 -lt 1 ] ||
[ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
391 [ $PARSECHOICE2 -lt 1 ] ||
[ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
392 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
393 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
395 # We parse the 2 choices to diff, store them in temporary files and diff them.
396 for PARSECHOICE
in $
(echo $CDDBDIFFCHOICE |
tr , \
); do
397 do_cddbparse
"$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
399 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
400 $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
401 if [ $
(cat "$ABCDETEMPDIR/$FILENAME.diff" |
wc -l) -ge 24 ]; then
402 page
"$ABCDETEMPDIR/$FILENAME.diff"
404 cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
408 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
413 # Finds an specific field from cddbinfo
418 TRACKNAME
="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
421 TRACKNAME
="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
424 grep ^EXTT
$CDDBTRACKNUM= "$CDDBDATA" | cut
-f2- -d= |
tr -d \
[:cntrl
:\
] | perl
-p -e 's/\\n/\n/;'
430 # Get the track number we are going to use for different actions
433 if [ -n "$STARTTRACKNUMBER" ] ; then
434 # Get the trackpadding from the current track
435 CURRENTTRACKPADDING
=$
(echo -n $UTRACKNUM |
wc -c)
436 TRACKNUM
=$
( printf %0.
${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
438 TRACKNUM
=${UTRACKNUM}
444 # Calculate cddb disc ids without requiring specialized helper programs.
445 # largely copied from cd-discid and musicbrainz examples. some of the steps
446 # don't make sense, but they're necessary to match the ids generated by other
449 ## FIXME ## Right now, we get 2 frames more than with cue2discid ??
450 # data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
451 # processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
452 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
453 # data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
454 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
456 # Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
459 if [ X
"$LEADOUT" = "X" ]; then
460 log warning
"Error trying to calculate disc ids without lead-out information."
464 # default to a two second lead-in
466 LEADIN
=${LEADIN:=150}
468 # number of cdframes per second
471 # reset cddb checksum for cddb disc-id calululation
475 for OFFSET
in $
(echo $OFFSETS)
477 COOKEDOFFSETS
="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
479 OFFSETTIME
=$
(( ($OFFSET + $LEADIN) / $CDFRAMES ))
480 while [ $OFFSETTIME -gt 0 ]; do
481 CDDBCKSUM
=$
(($CDDBCKSUM + $OFFSETTIME % 10))
482 OFFSETTIME
=$
(($OFFSETTIME / 10))
487 COOKEDOFFSETS
="${COOKEDOFFSETS:1}" # eat the leading space
489 PREGAP
=$
(($
(echo $OFFSETS | cut
-f1 -d' ')))
490 TOTALTIME
=$
(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
492 printf -v HEXSUM
"%08lx" $
(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
493 TRACKINFO="${HEXSUM} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
498 if checkstatus replaygain; then :; else
499 run_command "" echo "Adding replaygain information..."
500 for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
504 OUTPUT=$OGGOUTPUTCONTAINER
507 OUTPUT=$FLACOUTPUTCONTAINER
515 for UTRACKNUM in $TRACKQUEUE
517 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
518 getcddbinfo TRACKNAME
520 TRACKFILE="$(mungefilename "$TRACKNAME")"
521 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
522 ALBUMFILE="$(mungefilename "$DALBUM")"
523 GENRE="$(mungegenre "$GENRE")"
524 YEAR=${CDYEAR:-$CDYEAR}
526 if [ "$ONETRACK" = "y" ]; then
527 if [ "$VARIOUSARTISTS" = "y" ]; then
528 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
530 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
533 if [ "$VARIOUSARTISTS" = "y" ]; then
534 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
536 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
539 OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
540 (( REPLAYINDEX = $REPLAYINDEX + 1 ))
544 run_command replaygain-flac nice $ENCNICE $METAFLAC $FLACGAINOPTS "${OUTPUTFILES[@]}"
545 #run_command replaygain-flac true
548 run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN $VORBISGAINOPTS "${OUTPUTFILES[@]}"
551 run_command replaygain-mp3 nice $ENCNICE $MP3GAIN $MP3GAINOPTS "${OUTPUTFILES[@]}"
554 run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
559 if checkerrors "replaygain-.{3,6}"; then :; else
560 run_command replaygain true
565 # This code splits the a Various Artist track name from one of the following
568 # forward: Artist / Track
569 # forward-dash: Artist - Track
570 # reverse: Track / Artist
571 # reverse-dash: Track - Artist
572 # colon: Artist: Track
573 # trailing-paren: Artist (Track)
576 # VARIOUSARTISTS, VARIOUSARTISTSTYLE, TRACKNAME, TRACKARTIST
579 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
580 case "$VARIOUSARTISTSTYLE" in
582 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
583 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
584 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
587 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
588 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
589 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
592 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
593 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
594 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
597 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
598 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
599 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
602 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
603 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
604 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
607 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
608 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
609 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
612 elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
613 TRACKARTIST="Various"
615 TRACKARTIST="$DARTIST"
620 local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
624 "classic rock") id=1 ;;
642 "industrial") id=19 ;;
643 "alternative") id=20 ;;
645 "death metal") id=22 ;;
647 "soundtrack") id=24 ;;
648 "euro-techno") id
=25 ;;
652 "jazz+funk") id
=29 ;;
655 "classical") id
=32 ;;
656 "instrumental") id
=33 ;;
660 "sound clip") id
=37 ;;
663 "alt. rock") id
=40 ;;
668 "meditative") id
=45 ;;
669 "instrum. pop") id
=46 ;;
670 "instrum. rock") id
=47 ;;
674 "techno-indust.") id
=51 ;;
675 "electronic") id
=52 ;;
677 "eurodance") id
=54 ;;
679 "southern rock") id
=56 ;;
684 "christian rap") id
=61 ;;
685 "pop/funk"|
"pop / funk") id
=62 ;;
687 "native american") id
=64 ;;
690 "psychadelic") id
=67 ;;
692 "showtunes") id
=69 ;;
696 "acid punk") id
=73 ;;
697 "acid jazz") id
=74 ;;
701 "rock & roll") id
=78 ;;
702 "hard rock") id
=79 ;;
704 "folk/rock") id
=81 ;;
705 "national folk") id
=82 ;;
712 "bluegrass") id
=89 ;;
713 "avantgarde") id
=90 ;;
714 "gothic rock") id
=91 ;;
715 "progress. rock") id
=92 ;;
716 "psychadel. rock") id
=93 ;;
717 "symphonic rock") id
=94 ;;
718 "slow rock") id
=95 ;;
721 "easy listening") id
=98 ;;
727 "chamber music") id
=104 ;;
729 "symphony") id
=106 ;;
730 "booty bass") id
=107 ;;
732 "porn groove") id
=109 ;;
734 "slow jam") id
=111 ;;
738 "folklore") id
=115 ;;
740 "power ballad") id
=117 ;;
741 "rhythmic soul") id
=118 ;;
742 "freestyle") id
=119 ;;
744 "punk rock") id
=121 ;;
745 "drum solo") id
=122 ;;
746 "a capella") id
=123 ;;
747 "euro-house") id
=124 ;;
748 "dance hall") id
=125 ;;
750 "drum & bass") id
=127 ;;
751 "club-house") id
=128 ;;
752 "hardcore") id
=129 ;;
756 "negerpunk") id
=133 ;;
757 "polsk punk") id
=134 ;;
759 "christian gangsta rap") id
=136 ;;
760 "heavy metal") id
=137 ;;
761 "black metal") id
=138 ;;
762 "crossover") id
=139 ;;
763 "contemporary christian")id
=140 ;;
764 "christian rock") id
=141 ;;
765 "merengue") id
=142 ;;
767 "thrash metal") id
=144 ;;
770 "synthpop") id
=147 ;;
771 "rock/pop"|
"rock / pop") id
=148 ;;
778 # do_tag [tracknumber]
779 # id3 tags a filename
781 # TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC, ATOMICPARSLEY
782 # COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE
785 COMMENTOUTPUT
="$(eval echo ${COMMENT})"
786 if [ -z "$COMMENTOUTPUT" ]; then
787 COMMENTOUTPUT
="$(getcddbinfo TRACK-INFO)"
789 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
790 run_command
'' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
791 # If we want to start the tracks with a given number, we need to modify the
792 # TRACKNUM value before evaluation
793 if [ -n "$STARTTRACKNUMBERTAG" ] ; then
796 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
800 # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
801 GENREID
=$
(do_getgenreid
"${CDGENRE}")
802 # Set TPE2 in case we have a Various Artists rip.
804 if [ "$VARIOUSARTISTS" = "y" ]; then
811 # FIXME # track numbers in mp3 come with 1/10, so we cannot
812 # happily substitute them with $TRACKNUM
813 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE $TAGGER $TAGGEROPTS \
814 --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
815 -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
816 -G "$GENREID" -n "${TRACKNUM:-$1}" \
817 "${TRACKNUM:+-N $TRACKS}" \
818 "${ENCODING:+--set-encoding=$ENCODING}" \
819 "${TPE2:+--set-user-text-frame=TPE2:$TPE2}" \
820 "$ABCDETEMPDIR/track$1.$OUTPUT"
822 # FIXME # Still not activated...
824 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
825 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
826 -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" \
827 -y "$CDYEAR" -g "$GENREID" -k "${TRACKNUM:-$1}" \
828 "$ABCDETEMPDIR/track$1.$OUTPUT"
831 # FIXME # track numbers in mp3 come with 1/10, so we cannot
832 # happily substitute them with $TRACKNUM
833 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
834 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
835 -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" \
836 -y "$CDYEAR" -g "$GENREID" \
837 -T "${TRACKNUM:-$1}/$TRACKS" \
838 ${TPE2:+--TPE2 "$TPE2"} \
839 "$ABCDETEMPDIR/track$1.$OUTPUT"
844 case "$OGGENCODERSYNTAX" in
846 # vorbiscomment can't do in-place modification, mv the file first
847 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
848 mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
852 # http://www.xiph.org/ogg/vorbis/doc/v-comment.html
854 echo ARTIST
="$TRACKARTIST"
856 echo TITLE
="$TRACKNAME"
857 if [ -n "$CDYEAR" ]; then
860 if [ -n "$CDGENRE" ]; then
861 echo GENRE
="$CDGENRE"
863 echo TRACKNUMBER
=${TRACKNUM:-$1}
864 if [ -n "$DISCNUMBER" ]; then
865 echo DISCNUMBER
="$DISCNUMBER"
867 echo CDDB
=$CDDBDISCID
868 if [ "$(eval echo ${COMMENT})" != "" ]; then
869 case "$COMMENTOUTPUT" in
870 *=*) echo "$COMMENTOUTPUT";;
871 *) echo COMMENT
="$COMMENTOUTPUT";;
874 ) | run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
875 $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
876 "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
877 # Doublecheck that the commented file was created
878 # successfully before wiping the original
879 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
880 rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
882 mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
889 echo ARTIST
="$TRACKARTIST"
891 echo TITLE
="$TRACKNAME"
892 if [ -n "$CDYEAR" ]; then
895 if [ -n "$CDGENRE" ]; then
896 echo GENRE
="$CDGENRE"
898 echo TRACKNUMBER
="${TRACKNUM:-$1}"
899 if [ -n "$DISCNUMBER" ]; then
900 echo DISCNUMBER
="$DISCNUMBER"
902 echo CDDB
="$CDDBDISCID"
903 if [ "$(eval echo ${COMMENT})" != "" ]; then
904 case "$COMMENTOUTPUT" in
905 *=*) echo "$COMMENTOUTPUT";;
906 *) echo COMMENT
="$COMMENTOUTPUT";;
909 ) | run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
912 run_command tagtrack-
$OUTPUT-$1 true
915 run_command tagtrack-
$OUTPUT-$1 true
918 # Use a temp-file of our choice. --overWrite seems to
919 # case core dumps with AtomicParsley 0.9.0
920 ATOMICTEMPFILE
="$ABCDETEMPDIR/track$1.m4a-atomic"
923 if [ "$VARIOUSARTISTS" = "y" ]; then
927 #It has to be command file opts for AtomicParsley
928 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE $ATOMICPARSLEY $ABCDETEMPDIR/track
$1.m4a
--artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --tracknum ${TRACKNUM:-$1} --year "$CDYEAR" --genre "$CDGENRE" --compilation $VARIOUSBOOL --comment "$COMMENTOUTPUT" --output $ATOMICTEMPFILE
929 if [ -f $ATOMICTEMPFILE ]; then
930 mv "$ATOMICTEMPFILE" "$ABCDETEMPDIR/track$1.m4a"
934 run_command tagtrack-
$OUTPUT-$1 true
938 if checkerrors
"tagtrack-(.{3,6})-$1"; then :; else
939 run_command tagtrack-
$1 true
946 # OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
949 # The commands here don't go through run_command because they're never
950 # supposed to be silenced
951 echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
952 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
956 case "$MP3ENCODERSYNTAX" in
961 for UTRACKNUM
in $TRACKQUEUE
963 TRACKFILES
="$TRACKFILES track$UTRACKNUM.wav"
965 nice
$ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
967 if [ "$RETURN" != "0" ]; then
968 echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
970 for UTRACKNUM
in $TRACKQUEUE
972 run_command encodetrack-
$OUTPUT-$UTRACKNUM true
973 #run_command encodetrack-$UTRACKNUM true
982 if checkerrors
"nogap-encode"; then :; else
983 if [ ! "$KEEPWAVS" = "y" ] ; then
984 if [ ! "$KEEPWAVS" = "move" ] ; then
989 # Other encoders fall through to normal encoding as the tracks have not
990 # been entered in the status file.
993 # do_encode [tracknumber] [hostname]
994 # If no hostname is specified, encode locally
996 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
999 if [ "$USEPIPES" = "y" ]; then
1002 TEMPARG
="PIPE_$MP3ENCODERSYNTAX"
1005 TEMPARG
="PIPE_$OGGENCODERSYNTAX"
1008 TEMPARG
="PIPE_$FLACENCODERSYNTAX"
1011 TEMPARG
="PIPE_$SPEEXENCODER"
1014 TEMPARG
="PIPE_$MPPENCODER"
1017 TEMPARG
="PIPE_$MPPENCODER"
1020 IN
="$( eval echo "\$
$TEMPARG" )"
1022 IN
="$ABCDETEMPDIR/track$1.wav"
1025 case "$MP3ENCODERSYNTAX" in
1026 # FIXME # check if mp3enc needs -if for pipes
1027 # FIXME # I have not been able to find a working mp3enc binary
1041 # We need IN to proceed, if we are not using pipes.
1042 if [ -s "$IN" -o X
"$USEPIPES" = "Xy" ] ; then
1043 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1045 case "$TMPOUTPUT" in
1047 OUTPUT
=$OGGOUTPUTCONTAINER
1050 OUTPUT
=$FLACOUTPUTCONTAINER
1056 OUT
="$ABCDETEMPDIR/track$1.$OUTPUT"
1057 if [ "$NOGAP" = "y" ] && checkstatus encodetrack-
$OUTPUT-$1 ; then
1060 if [ X
"$USEPIPES" = "Xy" ]; then
1062 # We need a way to store the creation of the files when using PIPES
1063 RUN_COMMAND_PIPES
="run_command encodetrack-$OUTPUT-$1 true"
1064 # When pipping it does not make sense to have a higher nice for
1065 # reading than for encoding, since it will be hold by the
1066 # encoding process. Setting an effective nice, to calm down a
1067 # bit the reading process.
1068 EFFECTIVE_NICE
=$READNICE
1070 run_command
'' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
1071 RUN_COMMAND
="run_command encodetrack-$OUTPUT-$1"
1072 EFFECTIVE_NICE
=$ENCNICE
1078 case "$MP3ENCODERSYNTAX" in
1079 lame|toolame|gogo
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
1080 bladeenc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
1081 l3enc|xingmp3enc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
1082 # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
1083 mp3enc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
1087 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev
/null
2>&1
1094 case "$OGGENCODERSYNTAX" in
1095 vorbize
) $RUN_COMMAND nice
$EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
1096 oggenc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
1100 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev
/null
2>&1
1107 case "$FLACENCODERSYNTAX" in
1108 flac
) $RUN_COMMAND nice
$EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
1113 vecho
"$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
1114 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev
/null
2>&1
1119 if [ "$(eval echo ${COMMENT})" != "" ]; then
1122 *) COMMENT
="COMMENT=$COMMENT" ;;
1124 COMMENT
="--comment \"$COMMENT\""
1126 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1127 if [ ! "$DOTAG" = "y" ]; then
1128 $RUN_COMMAND nice
$EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" --comment "$COMMENT" "$IN" "$OUT"
1130 $RUN_COMMAND nice
$EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
1134 # MPP/MP+(Musepack) format (.mpc) is done locally, with inline
1136 # I tried compiling the mppenc from corecodecs.org and got some
1137 # errors, so I have not tried it myself.
1138 ## FIXME ## Needs some cleanup to determine if an empty tag sent
1139 ## FIXME ## to the encoder ends up empty.
1140 $RUN_COMMAND nice
$EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
1143 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1144 if [ ! "$DOTAG" = "y" ]; then
1145 $RUN_COMMAND nice
$EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
1148 $RUN_COMMAND nice
$ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
1152 # In case of wav output we need nothing. Just keep the wavs.
1157 # Only remove .wav if the encoding succeeded
1158 if checkerrors
"encodetrack-(.{3,6})-$1"; then :; else
1159 run_command encodetrack-
$1 true
1160 if [ ! "$KEEPWAVS" = "y" ] ; then
1161 if [ ! "$KEEPWAVS" = "move" ] ; then
1167 run_command
"" echo "HEH! The file we were about to encode disappeared:"
1168 run_command
"" echo ">> $IN"
1169 run_command encodetrack-
$1 false
1173 # do_preprocess [tracknumber]
1175 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1178 # IN="$ABCDETEMPDIR/track$1.wav"
1179 # # We need IN to proceed.
1180 # if [ -s "$IN" ] ; then
1181 # for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1183 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1184 # run_command '' echo "Pre-processing track $1 of $TRACKS..."
1185 # case "$POSTPROCESSFORMAT" in
1187 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $WAV_PRE $IF $OF ;;
1189 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $MP3_PRE $IF $OF ;;
1191 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $OGG_PRE $IF $OF ;;
1193 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $FLAC_PRE $IF $OF ;;
1195 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $SPX_PRE $IF $OF ;;
1198 # # Only remove .wav if the encoding succeeded
1199 # if checkerrors "preprocess-(.{3,4})-$1"; then
1200 # run_command preprocess-$1 false
1202 # run_command preprocess-$1 true
1205 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1206 # echo "HEH! The file we were about to pre-process disappeared:"
1209 # run_command preprocess-$1 false
1214 # do_postprocess [tracknumber]
1216 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1219 # for POSTPROCESSFORMAT in $(echo $POSTPROCESSFORMATS | tr , \ )
1221 # IN="$ABCDETEMPDIR/track$1.$POSTPROCESSFORMAT"
1222 # # We need IN to proceed.
1223 # if [ -s "$IN" ] ; then
1224 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1225 # run_command '' echo "Post-processing track $1 of $TRACKS..."
1226 # case "$POSTPROCESSFORMAT" in
1228 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $MP3_POST $IF $OF ;;
1230 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $OGG_POST $IF $OF ;;
1232 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $FLAC_POST $IF $OF ;;
1234 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
1236 # # Only remove .wav if the encoding succeeded
1237 # if checkerrors "postprocess-(.{3,4})-$1"; then
1238 # run_command postprocess-$1 false
1240 # run_command postprocess-$1 true
1243 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1244 # echo "HEH! The file we were about to post-process disappeared:"
1247 # run_command postprocess-$1 false
1262 # MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
1266 # The commands here don't go through run_command because they're never supposed to be silenced
1267 echo "Batch analizing gain in tracks: $TRACKQUEUE"
1272 for UTRACKNUM
in $TRACKQUEUE
1274 MP3FILES
="$TRACKFILES track$UTRACKNUM.mp3"
1276 # FIXME # Hard-coded batch option!
1277 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1279 if [ "$RETURN" != "0" ]; then
1280 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1282 for UTRACKNUM
in $TRACKQUEUE
1284 echo normalizetrack-
$UTRACKNUM >> status
1290 # do_batch_normalize
1292 # NORMALIZER, NORMALIZEROPTS
1293 do_batch_normalize
()
1295 # The commands here don't go through run_command because they're never supposed to be silenced
1296 echo "Batch normalizing tracks: $TRACKQUEUE"
1301 for UTRACKNUM
in $TRACKQUEUE
1303 TRACKFILES
="$TRACKFILES track$UTRACKNUM.wav"
1305 # XXX: Hard-coded batch option!
1306 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1308 if [ "$RETURN" != "0" ]; then
1309 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1311 for UTRACKNUM
in $TRACKQUEUE
1313 echo normalizetrack-
$UTRACKNUM >> status
1319 # do_normalize [tracknumber]
1321 # TRACKS, TRACKNAME, NORMALIZER, NORMALIZEROPTS
1324 IN
="$ABCDETEMPDIR/track$1.wav"
1325 if [ -e "$IN" ] ; then
1326 run_command
'' echo "Normalizing track $1 of $TRACKS: $TRACKNAME..."
1327 run_command normalizetrack-
$1 $NORMALIZER $NORMALIZEROPTS "$IN"
1329 if [ "$(checkstatus encode-output)" = "loud" ]; then
1330 echo "HEH! The file we were about to normalize disappeared:"
1333 run_command normalizetrack-
$1 false
"File $IN was not found"
1337 # do_move [tracknumber]
1338 # Deduces the outfile from environment variables
1339 # Creates directory if necessary
1341 # TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
1344 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1346 # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
1347 # defined the OUTPUTFILE:
1350 # Create ALBUMFILE, ARTISTFILE, TRACKFILE
1351 # Munge filenames as follows:
1356 # Eat control characters
1357 ALBUMFILE
="$(mungefilename "$DALBUM")"
1358 ARTISTFILE
="$(mungefilename "$TRACKARTIST")"
1359 TRACKFILE
="$(mungefilename "$TRACKNAME")"
1360 GENRE
="$(mungegenre "$GENRE")"
1361 YEAR
=${CDYEAR:-$CDYEAR}
1362 # If we want to start the tracks with a given number, we need to modify
1363 # the TRACKNUM value before evaluation
1365 # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
1366 # ARTISTFILE, TRACKFILE, and TRACKNUM.
1367 if [ "$ONETRACK" = "y" ]; then
1368 if [ "$VARIOUSARTISTS" = "y" ]; then
1369 OUTPUTFILE
="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
1371 OUTPUTFILE
="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
1374 if [ "$VARIOUSARTISTS" = "y" ]; then
1375 OUTPUTFILE
="$(eval echo \""$VAOUTPUTFORMAT"\")"
1377 OUTPUTFILE
="$(eval echo \""$OUTPUTFORMAT"\")"
1380 if checkerrors
"tagtrack-$OUTPUT-$1"; then :; else
1381 # Once we know the specific output was successful, we can change
1382 # the OUTPUT to the value containing the container
1385 OUTPUT
=$OGGOUTPUTCONTAINER
1388 OUTPUT
=$FLACOUTPUTCONTAINER
1394 # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
1395 OUTPUTFILEDIR
="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
1398 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1399 # FIXME # introduce warnings?
1402 # mkdir -p shouldn't return an error if the directory already exists
1403 mkdir
-p "$OUTPUTFILEDIR"
1404 run_command movetrack-
$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1405 if checkstatus movetrack-output-
$OUTPUT; then :; else
1406 run_command movetrack-output-
$OUTPUT true
1411 # mkdir -p shouldn't return an error if the directory already exists
1412 mkdir
-p "$OUTPUTFILEDIR"
1413 run_command movetrack-
$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1414 if checkstatus movetrack-output-
$OUTPUT; then :; else
1415 run_command movetrack-output-
$OUTPUT true
1419 # Lets move the cue file
1420 if CUEFILE
=$
(checkstatus cuefile
) >/dev
/null
; then
1421 if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
1422 if checkstatus movecue-
$OUTPUT; then :; else
1423 # Silence the Copying output since it overlaps with encoding processes...
1424 #run_command '' vecho "Copying cue file to its destination directory..."
1425 if checkstatus onetrack
>/dev
/null
; then
1428 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1429 # We dont have the dir, since it was not created before.
1432 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1435 # NOTE: Creating a cue file with the 3-char-extension files is to comply with
1436 # http://brianvictor.tripod.com/mp3cue.htm#details
1437 [a-z0-9
][a-z0-9
][a-z0-9
])
1438 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1441 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
1445 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
1447 echo movecue-
$OUTPUT >> "$ABCDETEMPDIR/status"
1456 # Create the playlist if wanted
1458 # PLAYLISTFORMAT, PLAYLISTDATAPREFIX, VAPLAYLISTFORMAT, VAPLAYLISTDATAPREFIX,
1459 # VARIOUSARTISTS, OUTPUTDIR
1462 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1466 OUTPUT
=$OGGOUTPUTCONTAINER
1469 OUTPUT
=$FLACOUTPUTCONTAINER
1475 # Create a playlist file for the playlist data to go into.
1476 # We used to wipe it out if it existed. Now we request permision if interactive.
1477 for LASTTRACK
in $TRACKQUEUE; do :; done
1478 ALBUMFILE
="$(mungefilename "$DALBUM")"
1479 ARTISTFILE
="$(mungefilename "$DARTIST")"
1480 GENRE
="$(mungegenre "$GENRE")"
1481 YEAR
=${CDYEAR:-$CDYEAR}
1482 if [ "$VARIOUSARTISTS" = "y" ] ; then
1483 PLAYLISTFILE
="$(eval echo "$VAPLAYLISTFORMAT")"
1485 PLAYLISTFILE
="$(eval echo "$PLAYLISTFORMAT")"
1487 FINALPLAYLISTDIR
="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
1488 mkdir
-p "$FINALPLAYLISTDIR"
1489 if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
1490 echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
1491 if [ "$INTERACTIVE" = "y" ]; then
1492 while [ "$DONE" != "y" ]; do
1494 case $ERASEPLAYLIST in
1495 e|E|a|A|k|K
) DONE
=y
;;
1496 "") ERASEPLAYLIST
=e
; DONE
=y
;;
1504 # Once we erase the playlist, we use append to create the new one.
1505 [ "$ERASEPLAYLIST" = "e" -o "$ERASEPLAYLIST" = "E" ] && rm -f "$OUTPUTDIR/$PLAYLISTFILE" && ERASEPLAYLIST
=a
1507 # The playlist does not exist, so we can safelly use append to create the new list
1510 if [ "$ERASEPLAYLIST" = "a" -o "$ERASEPLAYLIST" = "A" ]; then
1511 touch "$OUTPUTDIR/$PLAYLISTFILE"
1512 for UTRACKNUM
in $TRACKQUEUE
1514 # Shares some code with do_move since the filenames have to match
1515 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
1516 getcddbinfo TRACKNAME
1518 TRACKFILE
="$(mungefilename "$TRACKNAME")"
1519 ARTISTFILE
="$(mungefilename "$TRACKARTIST")"
1520 ALBUMFILE
="$(mungefilename "$DALBUM")"
1521 # If we want to start the tracks with a given number, we need to modify the
1522 # TRACKNUM value before evaluation
1524 if [ "$VARIOUSARTISTS" = "y" ]; then
1525 OUTPUTFILE
="$(eval echo \""$VAOUTPUTFORMAT\"")"
1527 OUTPUTFILE
="$(eval echo \""$OUTPUTFORMAT\"")"
1529 if [ "$VARIOUSARTISTS" = "y" ]; then
1530 if [ "$VAPLAYLISTDATAPREFIX" ] ; then
1531 echo ${VAPLAYLISTDATAPREFIX}$OUTPUTFILE.
$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1533 relpath
"$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1536 if [ "$PLAYLISTDATAPREFIX" ]; then
1537 echo ${PLAYLISTDATAPREFIX}$OUTPUTFILE.
$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1539 relpath
"$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1544 ## this will convert the playlist to have CRLF line-endings, if specified
1545 ## (some hardware players insist on CRLF endings)
1546 if [ "$DOSPLAYLIST" = "y" ]; then
1547 awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
1548 # mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
1549 cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" |
sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
1551 echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
1556 # This function reads a cuefile on stdin and writes an extended
1557 # cddb query on stdout. Any PREGAP for track 1 is properly
1558 # handled, although cue files embedded in FLAC files do not
1559 # appear to properly store the PREGAP setting. :(
1560 abcde.cue2discid
() {
1565 while [ $val -gt 0 ] ; do
1566 ret
=$
(( $ret + ( $val % 10) ))
1567 val
=$
(( $val / 10 ))
1577 local first second third
1578 first
=$
(expr ${1} + 0 )
1579 second
=$
(expr ${2} + 0 )
1580 third
=$
(expr ${3} + 0 )
1582 echo $
(( ((($first * 60) + $second) * 75) + $third ))
1592 while read line
; do
1595 TRACK
) i
=$
(( i
+ 1 ))
1597 INDEX
) if [ "$2" -eq 1 ] ; then
1599 START
=$
(( $LBA + $PREGAP + $OFFSET ))
1601 X
=$
(cddb_sum $
(( $START / 75 )) )
1605 PREGAP
) PREGAP
=$
(msf2lba
$2)
1609 LEADOUT
=$
(( $4 / 588 ))
1612 LEADIN
=$
(( $3 / 588 ))
1621 LEADOUT
=$
(( $LEADOUT + $LEADIN ))
1623 LENGTH
=$
(( $LEADOUT/75 - $TRACK1/75 ))
1624 DISCID
=$
(( ( $N % 255 ) * 2**24 |
$LENGTH * 2**8 |
$TRACKS ))
1625 printf "%08x %i" $DISCID $TRACKS
1628 while [ $j -le $TRACKS ] ; do
1629 eval echo -n "\" \$TRACK$j\""
1632 echo " $(( $LEADOUT / 75 ))"
1636 # abcde.mkcue [--wholedisk]
1637 # This creates a cuefile directly from the extended discid information
1638 # The --wholedisk option controls whether we're ripping data from the
1639 # start of track one or from the start of the disk (usually, but not
1640 # always the same thing!)
1642 # Track one leadin/pregap (if any) handeling:
1643 # --wholedisk specified:
1646 # INDEX 01 <pregap value>
1647 # Remaining track index values unchanged from disc TOC
1649 # --wholedisk not specified
1651 # PREGAP <pregap value>
1653 # Remaining track index values offset by <pregap value>
1660 printf "$1%02i:%02i:%02i\n" $
(($2/4500)) $
((($2/75)%60)) $
(($2%75))
1663 local MODE DISCID TRACKS
1667 if [ "$1" = --wholedisc ] ; then
1679 echo REM DISCID
$DISCID
1680 echo FILE
\"dummy.wav
\" WAVE
1682 if [ $1 -ne 150 ] && [ $MODE = "PREGAP" ] ; then
1689 while [ $i -le "$TRACKS" ] ; do
1690 LBA
=$
(( $1 - $OFFSET ))
1691 printf " TRACK %02i AUDIO\n" $i
1692 if [ $i -eq 1 -a $1 -ne 150 ] ; then
1693 if [ $MODE = PREGAP
] ; then
1694 echomsf
" PREGAP " $
(($OFFSET-150))
1696 echo " INDEX 00 00:00:00"
1699 echomsf
" INDEX 01 " $LBA
1706 # This essentially the start of things
1709 # Query the CD to get the track info, unless the user specified -C
1710 # or we are using some actions which do not need the CDDB data at all
1711 #if [ ! X"$EXPACTIONS" = "X" ]; then
1713 #elif [ -z "$DISCID" ]; then
1714 if [ -z "$DISCID" ]; then
1715 vecho
-n "Getting CD track info... "
1716 # In OSX, unmount the disc before a query
1717 if [ "$OSFLAVOUR" = "OSX" ]; then
1718 disktool
-u ${CDROM#/dev/}
1720 case "$CDROMREADERSYNTAX" in
1722 if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev
/null
2>&1 ; then
1723 case "$CUE2DISCID" in
1724 # FIXME # right now we have 2 cue2discid internal
1725 # implementations: builtin and abcde.cue2discid. Test
1726 # both of them and decide which one we want to use.
1728 #vecho "Using builtin cue2discid implementation..."
1729 CUESHEET
="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
1731 #TRACKS=$(echo $CUESHEET | egrep "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
1733 OFFSETTIMES
=( $
(echo "$CUESHEET" |
sed -n -e's/\ *INDEX 01\ \+//p' ) )
1734 TRACKS
=${#OFFSETTIMES[@]}
1736 #echo "processing offsetimes ${OFFSETTIMES[@]}"
1737 for OFFSETTIME
in ${OFFSETTIMES[@]}; do
1738 OFFSETS
="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
1739 #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
1742 LEADOUT
=$
(( $
(echo "$CUESHEET" |
grep lead-out | get_last
) / 44100 * 75 ))
1743 LEADIN
=$
(( $
(echo "$CUESHEET" |
grep lead-in | get_last
) / 44100 * 75 ))
1747 #vecho "Using external python cue2discid implementation..."
1748 TRACKINFO
=$
($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" |
$CUE2DISCID)
1752 log error
"the input flac file does not contain a cuesheet."
1757 # CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1759 # if [ ! "$RET" = "0" ];then
1760 # log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1763 # TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1764 # CDPARANOIAAUDIOTRACKS="$TRACKS"
1766 # LEADOUT="$(echo "$CDPARANOIAOUTPUT" | egrep -o '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
1767 # OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
1771 case "$CDDBMETHOD" in
1772 cddb
) TRACKINFO
=$
($CDDISCID "$CDROM") ;;
1773 # FIXME # musicbrainz needs a cleanup
1774 musicbrainz
) TRACKINFO
=$
($MUSICBRAINZ -c "$CDROM" ) ;;
1778 # Make sure there's a CD in there by checking cd-discid's return code
1779 if [ ! "$?" = "0" ]; then
1780 if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
1781 log error
"cuesheet information from the flac file could not be read."
1782 log error
"Perhaps the flac file does not contain a cuesheet?."
1785 log error
"CD could not be read. Perhaps there's no CD in the drive?"
1789 # In OSX, remount the disc again
1790 if [ "$OSFLAVOUR" = "OSX" ]; then
1791 disktool
-m ${CDROM#/dev/}
1794 DISCID
=$
(echo $TRACKINFO | cut
-f1 -d' ')
1796 TRACKINFO
=$
(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
1799 # Get a full enumeration of tracks, sort it, and put it in the TRACKQUEUE.
1800 # This needs to be done now because a section of the resuming code will need
1803 # get the number of digits to pad TRACKNUM with - we'll use this later
1804 # a CD can only hold 99 tracks, but since we support a feature for starting
1805 # numbering the tracks from a given number, we might need to set it as a
1806 # variable for the user to define... or obtain it somehow.
1807 if [ "$PADTRACKS" = "y" ] ; then
1811 ABCDETEMPDIR
="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
1812 if [ -z "$TRACKQUEUE" ]; then
1813 if [ ! "$STRIPDATATRACKS" = "n" ]; then
1814 case "$CDROMREADERSYNTAX" in
1816 if [ "$WEHAVEACD" = "y" ]; then
1817 vecho
"Querying the CD for audio tracks..."
1818 CDPARANOIAOUTPUT
="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1820 if [ ! "$RET" = "0" ];then
1821 log warning
"something went wrong while querying the CD... Maybe a DATA CD?"
1823 TRACKS
="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d ".
" | tr '\n' ' ')"
1824 CDPARANOIAAUDIOTRACKS
="$TRACKS"
1826 # Previous versions of abcde would store the tracks on a file, instead of the status record.
1827 if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
1828 echo cdparanoia-audio-tracks
=$
( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
1829 rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
1831 if [ -f "$ABCDETEMPDIR/status" ] && TRACKS
=$
(checkstatus cdparanoia-audio-tracks
); then :; else
1832 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1836 *) TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ') ;;
1839 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1841 if echo "$TRACKS" |
grep "[[:digit:]]" > /dev
/null
2>&1 ;then :;else
1842 log info
"The disc does not contain any tracks. Giving up..."
1845 echo -n "Grabbing entire CD - tracks: "
1846 if [ ! "$PADTRACKS" = "y" ] ; then
1847 TRACKNUMPADDING
=$
(echo -n $TRACKS |
wc -c |
tr -d ' ')
1849 TRACKS
=$
(printf "%0.${TRACKNUMPADDING}d" $TRACKS)
1851 while [ "$X" -ne "$TRACKS" ]
1853 X
=$
(printf "%0.${TRACKNUMPADDING}d" $
(expr $X + 1))
1854 TRACKQUEUE
=$
(echo $TRACKQUEUE $X)
1858 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1859 # User-supplied track queue.
1860 # Weed out non-numbers, whitespace, then sort and weed out duplicates
1861 TRACKQUEUE
=$
(echo $TRACKQUEUE |
sed 's-[^0-9 ]--g' |
tr ' ' '\n' |
grep -v ^$ |
sort -n |
uniq |
tr '\n' ' ' |
sed 's- $--g')
1862 # Once cleaned, obtain the highest value in the trackqueue for number padding
1863 for LASTTRACK
in $TRACKQUEUE; do :; done
1864 if [ ! "$PADTRACKS" = "y" ] ; then
1865 TRACKNUMPADDING
=$
(echo -n $LASTTRACK |
wc -c |
tr -d ' ')
1867 # Now we normalize the trackqueue
1868 for TRACK
in $TRACKQUEUE ; do
1869 TRACKNUM
=$
(printf %0.
${TRACKNUMPADDING}d $
(expr ${TRACK} + 0 ))
1870 PADTRACKQUEUE
=$
(echo $PADTRACKQUEUE $TRACKNUM)
1872 TRACKQUEUE
=$PADTRACKQUEUE
1873 echo Grabbing tracks
: "$TRACKQUEUE"
1876 QUEUEDTRACKS
=$
(echo $TRACKQUEUE |
wc -w |
tr -d ' ')
1878 # We have the discid, create a temp directory after it to store all the temp
1881 if [ -e "$ABCDETEMPDIR" ]; then
1882 echo -n "abcde: attempting to resume from $ABCDETEMPDIR"
1883 # It already exists, see if it's a directory
1884 if [ ! -d "$ABCDETEMPDIR" ]; then
1885 # This is a file/socket/fifo/device/etc, not a directory
1888 echo "abcde: file $ABCDETEMPDIR already exists and does not belong to abcde." >&2
1889 echo "Please investigate, remove it, and rerun abcde." >&2
1893 # It's a directory, let's see if it's writable by us
1894 if [ ! -r "$ABCDETEMPDIR" ] ||
[ ! -w "$ABCDETEMPDIR" ] ||
[ ! -x "$ABCDETEMPDIR" ]; then
1895 # Nope, complain and exit
1897 echo "abcde: directory $ABCDETEMPDIR already exists and is not writeable." >&2
1898 echo "Please investigate, remove it, and rerun abcde." >&2
1902 # See if it's populated
1903 if [ ! -f "$ABCDETEMPDIR/discid" ]; then
1904 # Wipe and start fresh
1905 echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
1906 echo -n "this directory to continue. Continue? [y/n] (n)" >&2
1907 if [ "$INTERACTIVE" = "y" ]; then
1913 if [ "$ANSWER" != "y" ]; then
1916 rm -rf "$ABCDETEMPDIR" ||
exit 1
1917 mkdir
-p "$ABCDETEMPDIR"
1918 if [ "$?" -gt "0" ]; then
1919 # Directory already exists or could not be created
1920 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1924 # Everything is fine. Check for ^encodetracklocation-
1925 # and encode-output entries in the status file and
1926 # remove them. These are not relevant across sessions.
1927 if [ -f "$ABCDETEMPDIR/status" ]; then
1928 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
1929 grep -v ^encodetracklocation-
< "$ABCDETEMPDIR/status.old" \
1930 |
grep -v ^encode-output
> "$ABCDETEMPDIR/status"
1932 # Remove old error messages
1933 if [ -f "$ABCDETEMPDIR/errors" ]; then
1934 rm -f "$ABCDETEMPDIR/errors"
1938 # We are starting from scratch
1939 mkdir
-p "$ABCDETEMPDIR"
1940 if [ "$?" -gt "0" ]; then
1941 # Directory already exists or could not be created
1942 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1945 cat /dev
/null
> "$ABCDETEMPDIR/status"
1946 # Store the abcde version in the status file.
1947 echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
1949 if [ X
"$DOCUE" = "Xy" -a X
"$WEHAVEACD" = "Xy" ]; then
1950 if checkstatus cuefile
> /dev
/null
2>&1 ; then :; else
1951 CUEFILE
=cue-$
(echo "$TRACKINFO" | cut
-f1 -d' ').txt
1952 vecho
"Creating cue file..."
1953 case $CDROMREADERSYNTAX in
1955 if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
1956 echo cuefile
=$CUEFILE >> "$ABCDETEMPDIR/status"
1958 log warning
"the input flac file does not contain a cuesheet."
1962 if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
1963 echo cuefile
=$CUEFILE >> "$ABCDETEMPDIR/status"
1965 log warning
"reading the CUE sheet is still considered experimental"
1966 log warning
"and there was a problem with the CD reading. abcde will continue,"
1967 log warning
"but consider reporting the problem to the abcde author"
1973 # If we got the CDPARANOIA status and it is not recorded, save it now
1974 if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
1975 if checkstatus cdparanoia-audio-tracks
> /dev
/null
2>&1; then :; else
1976 echo cdparanoia-audio-tracks
=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
1980 # Create the discid file
1981 echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
1982 if checkstatus cddbmethod
> /dev
/null
2>&1 ; then :; else
1983 echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
1988 # Create a proper CUE file based on the CUE file we created before.
1991 if CUEFILE_IN
="$ABCDETEMPDIR"/$
(checkstatus cuefile
); then
1992 CUEFILE_OUT
=$CUEFILE_IN.out
1993 ### FIXME ### checkstatus cddb
1994 if [ -e "$CDDBDATA" ]; then
1995 vecho
"Adding metadata to the cue file..."
1996 # FIXME It doesn't preserve spaces! Why?
1997 # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
1999 echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
2000 echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
2001 # Set IFS to <newline> to prevent read from swallowing spaces and tabs
2005 cat "$CUEFILE_IN" |
while read line
2007 if echo "$line" |
grep "INDEX 01" > /dev
/null
2>&1 ; then
2008 # FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
2009 # echo "$line" >> "$CUEFILE_OUT"
2010 # if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
2011 eval track
="\$TRACK$n"
2013 echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
2015 # FIXME # If the lines above are uncommented, remove the line below.
2016 echo "$line" >> "$CUEFILE_OUT"
2019 mv "$CUEFILE_OUT" "$CUEFILE_IN"
2020 echo "cleancuefile" >> "$ABCDETEMPDIR/status"
2026 # Parses a CDDB file and outputs the title and the track names.
2027 # Variables: CDDBFILE
2031 # List out disc title/author and contents
2032 if [ "$ONETRACK" = "y" ]; then
2033 vecho
"ONETRACK mode selected: displaying only the title of the CD..."
2035 echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
2036 if [ X
"$SHOWCDDBYEAR" = "Xy" ]; then
2037 PARSEDYEAR
=$
(grep DYEAR
"${CDDBPARSEFILE}" | cut
'-d=' -f2-)
2038 if [ ! X
"$PARSEDYEAR" = "X" ]; then
2039 echo "Year: $PARSEDYEAR"
2042 if [ X
"$SHOWCDDBGENRE" = "Xy" ]; then
2043 PARSEDGENRE
=$
(grep DGENRE
"${CDDBPARSEFILE}" | cut
'-d=' -f2-)
2044 if [ ! X
"$PARSEDGENRE" = "X" ]; then
2045 echo "Genre: $PARSEDGENRE"
2048 if [ ! "$ONETRACK" = "y" ]; then
2049 for TRACK
in $
(f_seq_row
1 $TRACKS)
2051 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "${CDDBPARSEFILE}" | cut -f2- -d= | tr -d \\r\\n)"
2057 # Check for a local CDDB file, and report success
2060 if checkstatus cddb-readcomplete
&& checkstatus cddb-choice
>/dev
/null
; then :; else
2062 CDDBLOCALSTATUS
="notfound"
2063 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
2066 if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
2067 CDDBLOCALRESULTS
="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
2068 if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
2069 if (( $
(echo "${CDDBLOCALRESULTS}" |
wc -l) == 1 )); then
2070 CDDBLOCALFILE
="${CDDBLOCALRESULTS}"
2071 CDDBLOCALMATCH
=single
2072 elif (( $
(echo "${CDDBLOCALRESULTS}" |
wc -l) > 1 )); then
2073 CDDBLOCALMATCH
=multiple
2078 elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
2079 CDDBLOCALFILE
="${CDDBLOCALDIR}/${CDDBDISCID}"
2080 CDDBLOCALMATCH
=single
2085 # If the user has selected to check a local CDDB repo, we proceed with it
2086 case $CDDBLOCALMATCH in
2088 echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
2090 echo "$CDDBLOCALRESULTS" |
while read RESULT
; do
2092 # List out disc title/author and contents
2093 CDDBLOCALREAD
="$ABCDETEMPDIR/cddblocalread.$X"
2094 cat "$RESULT" > "${CDDBLOCALREAD}"
2097 do_cddbparse
"${CDDBLOCALREAD}"
2099 ##FIXME## QUICK HACK !!!!
2100 if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
2101 } >> "$ABCDETEMPDIR/cddblocalchoices"
2103 if [ $
(cat "$ABCDETEMPDIR/cddblocalchoices" |
wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
2104 page
"$ABCDETEMPDIR/cddblocalchoices"
2106 # It's all going to fit in one page, cat it
2107 cat "$ABCDETEMPDIR/cddblocalchoices" >&2
2109 CDDBLOCALCHOICES
=$
( echo "$CDDBLOCALRESULTS" |
wc -l )
2110 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2111 CDDBLOCALCHOICENUM
=-1
2112 if [ "$INTERACTIVE" = "y" ]; then
2113 while [ $CDDBLOCALCHOICENUM -lt 0 ] ||
[ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
2114 echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
2115 read CDDBLOCALCHOICE
2116 [ x
"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE
="1"
2117 # FIXME # Introduce diff's
2118 if echo $CDDBLOCALCHOICE |
egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2119 diffentries cddblocalread
"$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
2120 elif echo $CDDBLOCALCHOICE |
egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2121 # Make sure we get a valid choice
2122 CDDBLOCALCHOICENUM
=$
(echo $CDDBLOCALCHOICE |
xargs printf %d
2>/dev
/null
)
2123 if [ $CDDBLOCALCHOICENUM -lt 0 ] ||
[ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
2124 echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
2130 #echo "Selected ..."
2132 CDDBLOCALCHOICENUM
=1
2134 if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
2135 #echo "Using local copy of CDDB data"
2136 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2137 cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
2138 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2139 echo cddb-readcomplete
>> "$ABCDETEMPDIR/status"
2140 do_cddbparse
"$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
2141 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2142 CDDBLOCALSTATUS
="found"
2144 #echo "Not using local copy of CDDB data"
2145 CDDBLOCALSTATUS
="notfound"
2149 # List out disc title/author and contents
2150 do_cddbparse
"${CDDBLOCALFILE}"
2151 #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
2152 # echo -n "Embedded cuesheet entry found, use it? [y/n] (y): " >&2
2154 echo -n "Locally cached CDDB entry found, use it? [y/n] (y): " >&2
2156 if [ "$INTERACTIVE" = "y" ]; then
2158 while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
2159 echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
2162 [ x
"$USELOCALRESP" = "x" ] && USELOCALRESP
="y"
2166 if [ "$USELOCALRESP" = "y" ]; then
2167 #echo "Using local copy of CDDB data"
2168 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2169 cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
2170 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2171 echo cddb-readcomplete
>> "$ABCDETEMPDIR/status"
2172 do_cddbparse
"${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
2173 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2174 CDDBLOCALSTATUS
="single"
2176 #echo "Not using local copy of CDDB data"
2177 CDDBLOCALSTATUS
="notfound"
2181 CDDBLOCALSTATUS
="notfound"
2187 do_musicbrainzstat
()
2194 # Use MBE_TOCGetCDIndexId on a perl query
2201 # Perform CDDB protocol version check if it hasn't already been done
2202 if checkstatus cddb-statcomplete
; then :; else
2203 if [ "$CDDBAVAIL" = "n" ]; then
2205 echo 503 > "$ABCDETEMPDIR/cddbstat"
2208 CDDBUSER
=$
(echo $HELLOINFO | cut
-f1 -d'@')
2209 CDDBHOST
=$
(echo $HELLOINFO | cut
-f2- -d'@')
2210 while test $rc -eq 1 -a $CDDBPROTO -ge 3; do
2211 vecho
"Checking CDDB server status..."
2212 $CDDBTOOL stat
$CDDBURL $CDDBUSER $CDDBHOST $CDDBPROTO > "$ABCDETEMPDIR/cddbstat"
2213 RESPONSECODE
=$
(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut
-f1 -d' ')
2214 case "$RESPONSECODE" in
2215 210) # 210 OK, status information follows (until terminating `.')
2218 501) # 501 Illegal CDDB protocol level: <n>.
2219 CDDBPROTO
=`expr $CDDBPROTO - 1`
2221 *) # Try a cddb query, since freedb2.org doesn't support the stat or ver commands
2222 # FreeDB TESTCD disc-id is used for query
2223 $CDDBTOOL query
$CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST 03015501 1 296 344 > "$ABCDETEMPDIR/cddbstat"
2224 RESPONSECODE
=$
(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut
-f1 -d' ')
2225 case "$RESPONSECODE" in
2226 2??
) # Server responded, everything seems OK
2233 if test $rc -eq 1; then
2237 echo cddb-statcomplete
>> "$ABCDETEMPDIR/status"
2245 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
2246 CDDBLOCALFILE
="${CDDBLOCALDIR}/${CDDBDISCID}"
2248 # Perform CDDB query if it hasn't already been done
2249 if checkstatus cddb-querycomplete
; then :; else
2250 if [ "$CDDBAVAIL" = "n" ]; then
2252 echo 503 > "$ABCDETEMPDIR/cddbquery"
2253 # The default CDDBLOCALSTATUS is "notfound"
2254 # This part will be triggered if the user CDDB repo does not
2255 # contain the entry, or if we are not trying to use the repo.
2257 vecho
"Querying the CDDB server..."
2258 CDDBUSER
=$
(echo $HELLOINFO | cut
-f1 -d'@')
2259 CDDBHOST
=$
(echo $HELLOINFO | cut
-f2- -d'@')
2260 $CDDBTOOL query
$CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $TRACKINFO > "$ABCDETEMPDIR/cddbquery"
2266 # no match found in database,
2267 # wget/fetch error, or user requested not to use CDDB
2268 # Make up an error code (503) that abcde
2269 # will recognize in do_cddbread
2270 # and compensate by making a template
2271 echo 503 > "$ABCDETEMPDIR/cddbquery"
2273 *) # strange and unknown error
2274 echo ERRORCODE
=$ERRORCODE
2275 echo "abcde: $CDDBTOOL returned unknown error code"
2279 echo cddb-querycomplete
>> "$ABCDETEMPDIR/status"
2286 # If it's not to be used, generate a template.
2287 # Then, display it (or them) and let the user choose/edit it
2288 if checkstatus cddb-readcomplete
; then :; else
2289 vecho
"Obtaining CDDB results..."
2290 # If CDDB is to be used, interpret the query results and read all
2291 # the available entries.
2292 rm -f "$ABCDETEMPDIR/cddbchoices"
2293 CDDBCHOICES
=1 # Overridden by multiple matches
2294 RESPONSECODE
=$
(head -n 1 "$ABCDETEMPDIR/cddbquery" | cut
-f1 -d' ')
2295 case "$RESPONSECODE" in
2297 # One exact match, retrieve it
2298 # 200 [section] [discid] [artist] / [title]
2299 if checkstatus cddb-read-1-complete
; then :; else
2300 echo -n "Retrieving 1 CDDB match..." >> "$ABCDETEMPDIR/cddbchoices"
2301 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $
(cut
-f2,3 -d' ' "$ABCDETEMPDIR/cddbquery") > "$ABCDETEMPDIR/cddbread.1"
2302 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2303 echo cddb-read-1-complete
>> "$ABCDETEMPDIR/status"
2304 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2306 # List out disc title/author and contents
2307 echo ---- "$(cut '-d ' -f4- "$ABCDETEMPDIR/cddbquery
")" ---- >> "$ABCDETEMPDIR/cddbchoices"
2308 for TRACK
in $
(f_seq_row
1 $TRACKS)
2310 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2312 echo >> "$ABCDETEMPDIR/cddbchoices"
2316 case "$RESPONSECODE" in
2317 202) echo "No CDDB match." >> "$ABCDETEMPDIR/cddbchoices" ;;
2318 403|
409) echo "CDDB entry is corrupt, or the handshake failed." >> "$ABCDETEMPDIR/cddbchoices" ;;
2319 503) echo "CDDB unavailable." >> "$ABCDETEMPDIR/cddbchoices" ;;
2321 $CDDBTOOL template $
(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2322 # List out disc title/author and contents of template
2323 echo ---- Unknown Artist
/ Unknown Album
---- >> "$ABCDETEMPDIR/cddbchoices"
2325 for TRACK
in $
(f_seq_row
1 $TRACKS)
2327 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2329 echo >> "$ABCDETEMPDIR/cddbchoices"
2330 echo cddb-read-0-complete
>> "$ABCDETEMPDIR/status"
2331 echo cddb-choice
=0 >> "$ABCDETEMPDIR/status"
2334 # Multiple exact, (possibly multiple) inexact matches
2336 if [ "$RESPONSECODE" = "211" ]; then IN
=in; fi
2337 if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery
" | tr -d ' ')" -eq 3 ]; then
2338 echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
2339 tail -n +2 "$ABCDETEMPDIR/cddbquery" |
head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
2340 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2342 echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
2344 vecho
-n "Retrieving multiple matches... "
2345 grep -v ^
[.
]$
"$ABCDETEMPDIR/cddbquery" |
( X
=0
2346 read DISCINFO
# eat top line
2350 if checkstatus cddb-read-
$X-complete; then :; else
2351 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $
(echo $DISCINFO | cut
-f1,2 -d' ') > "$ABCDETEMPDIR/cddbread.$X"
2352 echo cddb-read-
$X-complete >> "$ABCDETEMPDIR/status"
2354 # List out disc title/author and contents
2355 echo \
#$X: ---- "$DISCINFO" ---- >> "$ABCDETEMPDIR/cddbchoices"
2356 for TRACK
in $
(f_seq_row
1 $TRACKS)
2358 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.
$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2360 echo >> "$ABCDETEMPDIR/cddbchoices"
2363 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2367 for TRACK
in $
(f_seq_row
1 $TRACKS)
2369 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2371 echo >> "$ABCDETEMPDIR/cddbchoices"
2372 echo cddb-read-1-complete
>> "$ABCDETEMPDIR/status"
2373 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2376 echo "cddb-readcomplete" >> "$ABCDETEMPDIR/status"
2383 if checkstatus cddb-edit
>/dev
/null
; then
2384 CDDBDATA
="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2385 VARIOUSARTISTS
="$(checkstatus variousartists)"
2386 VARIOUSARTISTSTYLE
="$(checkstatus variousartiststyle)"
2389 if [ "$INTERACTIVE" = "y" ]; then
2390 # We should show the CDDB results both when we are not using the local CDDB repo
2391 # or when we are using it but we could not find a proper match
2392 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] ||
[ ! "$CDDBUSELOCAL" = "y" ]; then
2393 # Display the $ABCDETEMPDIR/cddbchoices file created above
2394 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2395 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2396 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2397 CHOICE
=$
(checkstatus cddb-choice
)
2398 if [ -n "$CHOICE" ] ; then
2399 case $CDDBCHOICES in
2400 -1) if head -1 "$ABCDETEMPDIR/cddbquery" |
grep "^$" > /dev
/null
2>&1 ; then
2401 log error
"CDDB query failed!"
2404 cat "$ABCDETEMPDIR/cddbchoices"
2407 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2409 echo "Selected: #$CHOICE"
2410 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CHOICE"
2414 # The user has a choice to make, display the info in a pager if necessary
2415 if [ $
(cat "$ABCDETEMPDIR/cddbchoices" |
wc -l) -ge 24 ]; then
2416 page
"$ABCDETEMPDIR/cddbchoices"
2418 # It's all going to fit in one page, cat it
2419 cat "$ABCDETEMPDIR/cddbchoices" >&2
2423 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2425 # I'll take CDDB read #3 for $400, Alex
2426 while [ $CDCHOICENUM -lt 0 ] ||
[ $CDCHOICENUM -gt $CDDBCHOICES ]; do
2427 echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
2429 [ X
"$CDDBCHOICE" = "X" ] && CDDBCHOICE
=1
2430 if echo $CDDBCHOICE |
egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2431 if [ ! X
"$DIFF" = "X" ]; then
2432 PARSECHOICE1
=$
(echo $CDDBCHOICE | cut
-d"," -f1 |
xargs printf %d
2>/dev
/null
)
2433 PARSECHOICE2
=$
(echo $CDDBCHOICE | cut
-d"," -f2 |
xargs printf %d
2>/dev
/null
)
2434 if [ $PARSECHOICE1 -lt 1 ] ||
[ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
2435 [ $PARSECHOICE2 -lt 1 ] ||
[ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
2436 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
2437 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBCHOICES" >&2
2439 # We parse the 2 choices to diff, store them in temporary files and diff them.
2440 for PARSECHOICE
in $
(echo $CDDBCHOICE |
tr , \
); do
2441 do_cddbparse
"$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
2443 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
2444 $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
2445 if [ $
(cat "$ABCDETEMPDIR/cddbread.diff" |
wc -l) -ge 24 ]; then
2446 page
"$ABCDETEMPDIR/cddbread.diff"
2448 cat "$ABCDETEMPDIR/cddbread.diff" >&2
2452 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
2454 elif echo $CDDBCHOICE |
egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2455 # Make sure we get a valid choice
2456 CDCHOICENUM
=$
(echo $CDDBCHOICE |
xargs printf %d
2>/dev
/null
)
2457 if [ $CDCHOICENUM -lt 0 ] ||
[ $CDCHOICENUM -gt $CDDBCHOICES ]; then
2458 echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
2462 if [ "$CDCHOICENUM" = "0" ]; then
2463 vecho
"Creating empty CDDB template..."
2465 $CDDBTOOL template $
(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2467 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.
$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2468 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
2470 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2474 # We need some code to show the selected option when local repository is selected and we have found a match
2475 vecho
"Using cached CDDB match..." >&2
2476 # Display the $ABCDETEMPDIR/cddbchoices file created above
2477 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2478 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2479 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2480 CHOICE
=$
(checkstatus cddb-choice
)
2481 if [ "$USELOCALRESP" = "y" ]; then :; else
2482 if [ -n "$CHOICE" ] ; then
2483 case $CDDBCHOICES in
2486 echo "Selected template."
2488 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2490 echo "Selected: #$CHOICE"
2491 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CHOICE"
2499 # We're noninteractive - pick the first choice.
2500 # But in case we run a previous instance and selected a choice, use it.
2501 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2502 # Show the choice if we are not using the locally stored one
2503 # or when the local search failed to find a match.
2504 PREVIOUSCHOICE
=$
(checkstatus cddb-choice
)
2505 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] ||
[ ! "$CDDBUSELOCAL" = "y" ]; then
2506 #if [ "$PREVIOUSCHOICE" ]; then
2507 cat "$ABCDETEMPDIR/cddbchoices"
2510 if [ ! -z "$PREVIOUSCHOICE" ] ; then
2511 CDCHOICENUM
=$PREVIOUSCHOICE
2514 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2516 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.
$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2521 if checkstatus cddb-choice
>/dev
/null
; then :; else
2522 echo "abcde: internal error: cddb-choice not recorded." >&2
2525 CDDBDATA
="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2526 echo -n "Edit selected CDDB data? [y/n] (" >&2
2527 if [ "$INTERACTIVE" = "y" ]; then
2528 if [ "$UNKNOWNDISK" = "y" ]; then
2531 [ "$EDITCDDB" != "n" ] && EDITCDDB
=y
2540 if [ "$EDITCDDB" = "y" ]; then
2541 CDDBDATAMD5SUM
=$
($MD5SUM "$CDDBDATA" | cut
-d " " -f 1);
2543 # Use the debian sensible-editor wrapper to pick the editor that the
2544 # user has requested via their $EDITOR environment variable
2545 if [ -x "/usr/bin/sensible-editor" ]; then
2546 /usr
/bin
/sensible-editor
"$CDDBDATA"
2547 elif [ -n "$EDITOR" ]; then
2548 if [ -x $
(which "${EDITOR%%\ *}") ]; then
2549 # That failed, try to load the preferred editor, starting
2550 # with their EDITOR variable
2551 eval $
(echo "$EDITOR") \"$CDDBDATA\"
2553 # If that fails, check for a vi
2554 elif which vi
>/dev
/null
2>&1; then
2556 elif [ -x /usr
/bin
/vim
]; then
2557 /usr
/bin
/vim
"$CDDBDATA"
2558 elif [ -x /usr
/bin
/vi
]; then
2559 /usr
/bin
/vi
"$CDDBDATA"
2560 elif [ -x /bin
/vi
]; then
2562 # nano should be on all (modern, i.e., sarge) debian systems
2563 elif which nano
>/dev
/null
2>&1 ; then
2565 elif [ -x /usr
/bin
/nano
]; then
2566 /usr
/bin
/nano
"$CDDBDATA"
2567 # mg should be on all OpenBSD systems
2568 elif which mg
>/dev
/null
2>&1 ; then
2570 elif [ -x /usr
/bin
/mg
]; then
2571 /usr
/bin
/mg
"$CDDBDATA"
2574 log warning
"no editor available. Check your EDITOR environment variable."
2576 # delete editor backup file if it exists
2577 if [ -w "$CDDBDATA~" ]; then
2582 # Some heuristics first. Look at Disc Title, and if it starts with
2583 # "Various", then we'll assume Various Artists
2584 if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
2585 echo "Looks like a Multi-Artist CD" >&2
2588 echo -n "Is the CD multi-artist? [y/n] (n): " >&2
2589 if [ "$INTERACTIVE" = "y" ]; then
2596 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
2599 # Need NUMTRACKS before cddb-tool will return it:
2600 NUMTRACKS
=$
(egrep '^TTITLE[0-9]+=' "$CDDBDATA" |
wc -l)
2601 if [ "$(grep -c "^TTITLE.
*\
/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2602 # More than 1/2 tracks contain a "/", so guess forward
2604 elif [ "$(grep -c "^TTITLE.
*\
-" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2605 # More than 1/2 contain a "-", so guess forward-dash
2607 elif [ "$(grep -c "^TTITLE.
*(.
*)" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2608 # More than 1/2 contain something in parens, so guess trailing-paren
2612 echo "1) Artist / Title" >&2
2613 echo "2) Artist - Title" >&2
2614 echo "3) Title / Artist" >&2
2615 echo "4) Title - Artist" >&2
2616 echo "5) Artist: Title" >&2
2617 echo "6) Title (Artist)" >&2
2618 echo "7) This is a single-artist CD" >&2
2619 echo -n "Which style of multiple artist entries is it? [1-7] ($DEFAULTSTYLE): " >&2
2620 if [ "$INTERACTIVE" = "y" ]; then
2621 read VARIOUSARTISTSTYLE
2623 echo $DEFAULTSTYLE >&2
2624 VARIOUSARTISTSTYLE
=$DEFAULTSTYLE
2626 VARIOUSARTISTSTYLE
=$
(echo 0$VARIOUSARTISTSTYLE |
xargs printf %d
)
2627 # If they press Enter, then the default style (0) was chosen
2628 while [ $VARIOUSARTISTSTYLE -lt 0 ] ||
[ $VARIOUSARTISTSTYLE -gt 7 ]; do
2629 echo "Invalid selection. Please choose a number between 1 and 7."
2630 echo -n "Selection [1-7]: "
2631 read VARIOUSARTISTSTYLE
2632 VARIOUSARTISTSTYLE
=$
(echo 0$VARIOUSARTISTSTYLE |
xargs printf %d
)
2634 if [ "$VARIOUSARTISTSTYLE" = "0" ]; then
2635 VARIOUSARTISTSTYLE
=$DEFAULTSTYLE
2637 vecho
"Selected: $VARIOUSARTISTSTYLE"
2638 case "$VARIOUSARTISTSTYLE" in
2640 VARIOUSARTISTSTYLE
=forward
2643 VARIOUSARTISTSTYLE
=forward-dash
2646 VARIOUSARTISTSTYLE
=reverse
2649 VARIOUSARTISTSTYLE
=reverse-dash
2652 VARIOUSARTISTSTYLE
=colon
2655 VARIOUSARTISTSTYLE
=trailing-paren
2663 echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
2664 echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
2666 if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
2667 if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
2668 # This works but does not have the necessary error checking
2669 # yet. If you are familiar with the CDDB spec
2670 # (see http://www.freedb.org/src/latest/DBFORMAT)
2671 # and can create an error-free entry on your own, then put
2672 # UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
2673 # abcde.conf to enable it. Put CDDBSUBMIT=email@address in
2674 # your abcde.conf to change the email address submissions are
2677 # submit the modified file, if they want
2678 if [ "$NOSUBMIT" != "y" ]; then
2679 echo -n "Do you want to submit this entry to $CDDBSUBMIT? [y/n] (n): "
2681 while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
2682 [ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
2684 echo -n 'Invalid selection. Please answer "y" or "n": '
2687 if [ "$YESNO" = "y" ] ||
[ "$YESNO" = "Y" ]; then
2688 echo -n "Sending..."
2689 $CDDBTOOL send
"$CDDBDATA" $CDDBSUBMIT
2696 # User CDDBLOCALPOLICY to find out if we store the file or not...
2697 # Cache edited CDDB entry in the user's cddb dir
2698 if [ "$CDDBCOPYLOCAL" = "y" ]; then
2699 # Make sure the cache directory exists
2700 mkdir
-p $CDDBLOCALDIR
2701 cat "$CDDBDATA" |
tail -n $
(expr $
(cat "$CDDBDATA" |
wc -l ) - 1 ) > ${CDDBLOCALDIR}/$
(echo "$TRACKINFO" | cut
-d' ' -f1)
2704 echo "cddb-edit" >> "$ABCDETEMPDIR/status"
2707 # do_cdread [tracknumber]
2708 # do_cdread onetrack [firsttrack] [lasttrack]
2712 # The commands here don't go through run_command because they're never supposed to be silenced
2713 # return codes need to be doublechecked anyway, however
2714 if [ "$1" = "onetrack" ]; then
2715 # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
2716 # FIXME # Until then, we grab the whole CD in one track, no matter what
2718 # We need the first and last track for cdda2wav/icedax
2720 LASTTRACK
=$
(expr $3 + 0)
2721 UTRACKNUM
=$FIRSTTRACK
2722 case "$CDROMREADERSYNTAX" in
2723 flac
) READTRACKNUMS
="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
2726 # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
2727 READTRACKNUMS
="$FIRSTTRACK-$LASTTRACK" ;;
2728 cdda2wav | icedax
) READTRACKNUMS
="$FIRSTTRACK+$LASTTRACK" ;;
2729 *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
2735 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
2736 if [ "$USEPIPES" = "y" ]; then
2737 TEMPARG
="PIPERIPPER_$CDROMREADERSYNTAX"
2738 FILEARG
="$( eval echo "\$
$TEMPARG" )"
2740 PIPE_MESSAGE
="and encoding "
2742 WAVDATA
="$ABCDETEMPDIR/track$UTRACKNUM.wav"
2743 case "$CDROMREADERSYNTAX" in
2744 ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
2746 FILEARG
="--output-name=$WAVDATA"
2749 FILEARG
="-f $WAVDATA"
2757 if [ "$1" = "onetrack" ]; then
2758 echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
2760 if [ -r "$CDDBDATA" ]; then
2761 getcddbinfo TRACKNAME
2762 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
2764 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
2767 case "$CDROMREADERSYNTAX" in
2768 ### FIXME ### use an exception for flac, since it uses -o
2769 ### FIXME ### Shall we just use -o $FILEARG ??
2771 # Avoid problems wit math expressions by unpadding the given UTRACKNUM
2772 STRIPTRACKNUM
=$
(expr $UTRACKNUM + 0)
2773 nice
$READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
2775 if [ "$REDIR" = "y" ]; then
2776 nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2778 nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2782 if [ "$OSFLAVOUR" = "OSX" ] ; then
2783 # Hei, we have to unmount the device before running anything like cdda2wav/icedax in OSX
2784 disktool
-u ${CDROM#/dev/} 0
2785 # Also, in OSX the cdrom device for cdda2wav/icedax changes...
2786 CDDA2WAVCDROM
="IODVDServices"
2787 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2788 CDDA2WAVCDROM
="$CDROMID"
2790 if [ "$CDROMID" = "" ]; then
2791 CDDA2WAVCDROM
="$CDROM"
2793 CDDA2WAVCDROM
="$CDROMID"
2796 if [ "$REDIR" = "y" ]; then
2797 nice
$READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2799 nice
$READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2801 ## FIXME ## We have an exception for dagrab, since it uses -f
2802 ## FIXME ## Shall we just use -f $FILEARG ??
2804 if [ "$REDIR" = "y" ]; then
2805 nice
$READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" >&2
2807 nice
$READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG"
2810 # Find the track's mounted path
2811 REALTRACKNUM
=$
(expr $UTRACKNUM + 0)
2812 FILEPATH
=$
(mount |
grep "$CDROM on" |
sed 's/^[^ ]* on \(.*\) (.*/\1/')
2813 FILEPATH
=$
(find "$FILEPATH" |
grep "/$REALTRACKNUM ");
2814 # If the file exists, copy it
2815 if [ -e "$FILEPATH" ] ; then
2816 if [ "$REDIR" = "y" ]; then
2817 nice
$READNICE $CDROMREADER "$FILEPATH" "$FILEARG" >&2
2819 nice
$READNICE $CDROMREADER "$FILEPATH" "$FILEARG"
2825 if [ "$REDIR" = "y" ]; then
2826 nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" >&2
2828 nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG"
2832 # If we get some error or we get some missing wav
2833 # (as long as we dont use pipes)
2834 if [ "$RETURN" != "0" -o \
( ! -s "$WAVDATA" -a X
"$USEPIPES" != "Xy" \
) ]; then
2835 # Thank goodness errors is only machine-parseable up to the
2836 # first colon, otherwise this woulda sucked
2837 if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
2838 RETURN
=73 # fake a return code as cdparanoia return 0 also on aborted reads
2840 if [ "$USEPIPES" = "y" ]; then
2841 echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2843 echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2847 if [ "$USEPIPES" = "y" ]; then
2848 echo readencodetrack-
$UTRACKNUM >> "$ABCDETEMPDIR/status"
2850 echo readtrack-
$UTRACKNUM >> "$ABCDETEMPDIR/status"
2852 if [ "$1" = "onetrack" ]; then
2853 echo onetrack
>> "$ABCDETEMPDIR/status"
2859 # No values accepted, only uses env variables
2862 if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev
/null
; then
2863 vecho
"Setting CD speed to ${CDSPEEDVALUE}x"
2865 echo "abcde: unable to set the device speed" >&2
2871 # vecho outputs a message if EXTRAVERBOSE is selected
2874 if [ x
"$EXTRAVERBOSE" != "x" ]; then
2876 warning
) shift ; log warning
"$@" ;;
2884 # decho outputs a debug message if DEBUG is selected
2887 if [ x
"$DEBUG" != "x" ]; then
2888 if echo $1 |
grep "^\[" > /dev
/null
2>&1 ; then
2889 DEBUGECHO
=$
(echo "$@" |
tr -d '[]')
2890 echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
2897 # User-redefinable functions
2898 # Custom filename munging:
2901 #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
2902 echo "$@" |
sed s
,:,\
-,g |
tr \
/ __ |
tr -d \'\"\?\
[:cntrl
:\
]
2905 # Custom genre munging:
2908 echo $CDGENRE |
tr "[:upper:]" "[:lower:]"
2912 # Empty pre_read function, to be defined in the configuration file.
2919 # Empty post_read function, to be defined in the configuration file.
2926 # Empty post_encode function, to be defined in the configuration file.
2932 ###############################################################################
2935 # Start of execution
2936 ###############################################################################
2941 # Defaults to FreeDB, but a python musicbrainz can be used
2943 CDDBURL
="http://freedb.freedb.org/~cddb/cddb.cgi"
2944 CDDBSUBMIT
=freedb-submit@freedb.org
2946 HELLOINFO
="$(whoami)@$(hostname)"
2948 CDDBLOCALPOLICY
="always"
2949 CDDBLOCALRECURSIVE
="y"
2950 CDDBLOCALDIR
="$HOME/.cddb"
2953 # List of fields we parse and show during the CDDB parsing...
2954 SHOWCDDBFIELDS
="year,genre"
2957 #CDROMREADERSYNTAX=cdparanoia
2958 ENCODERSYNTAX
=default
2960 MP3ENCODERSYNTAX
=default
2961 OGGENCODERSYNTAX
=default
2962 FLACENCODERSYNTAX
=default
2963 SPEEXENCODERSYNTAX
=default
2964 MPPENCODERSYNTAX
=default
2965 AACENCODERSYNTAX
=default
2966 NORMALIZERSYNTAX
=default
2967 CUEREADERSYNTAX
=default
2969 OUTPUTFORMAT
='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
2970 # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
2971 #VAOUTPUTFORMAT=${OUTPUTFORMAT}
2972 VAOUTPUTFORMAT
='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
2973 ONETRACKOUTPUTFORMAT
='${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
2974 VAONETRACKOUTPUTFORMAT
='Various-${ALBUMFILE}/${ALBUMFILE}'
2975 PLAYLISTFORMAT
='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2976 PLAYLISTDATAPREFIX
=''
2977 VAPLAYLISTFORMAT
='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2978 VAPLAYLISTDATAPREFIX
=''
2986 VARIOUSARTISTSTYLE
=forward
2993 # If using scsi devices, cdda2wav/icedax needs a CDROMID, instead of a device node
2994 # i.e. CDROMID="1,0,0"
2996 # If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
2997 # If we are using the ide-scsi emulation layer, we need to define a "g"
2998 CDPARANOIACDROMBUS
="d"
3000 # program paths - defaults to checking your $PATH
3007 XINGMP3ENC
=xingmp3enc
3024 VORBISCOMMENT
=vorbiscomment
3028 CDPARANOIA
=cdparanoia
3034 MUSICBRAINZ
=musicbrainz-get-tracks
3038 NORMALIZE
=normalize-audio
3040 VORBISGAIN
=vorbisgain
3048 # Options for programs called from abcde
3061 VORBISGAINOPTS
="--album"
3064 FLACGAINOPTS
="--add-replay-gain"
3086 VORBISCOMMENTOPTS
="-R"
3087 METAFLACOPTS
="--no-utf8-convert"
3090 # Default to one process if -j isn't specified
3093 # List of actions to perform - by default, run to completion
3094 ACTIONS
=cddb
,read,encode
,tag
,move
,clean
3096 # This option is basicaly for Debian package dependencies:
3097 # List of prefered outputs - by default, run with whatever we have in the path
3098 DEFAULT_OUTPUT_BINARIES
=vorbis
:oggenc
,flac
:flac
,mp3
:toolame
,mp3
:lame
,mp3
:bladeenc
,spx
:speex
,m4a
:faac
3100 # List of prefered cdromreaders - by default, run whichever we have in the path
3101 DEFAULT_CDROMREADERS
="cdparanoia icedax cdda2wav"
3103 # List of quality levels associated with the encoders:
3104 DEFAULT_QUALITY_XLO
="oggenc:-q -1,lame:-q 9,speex:--quality 1,m4a:"
3105 DEFAULT_QUALITY_LO
="oggenc:-q 1,lame:-q 7,speex:--quality 5,m4a:"
3106 DEFAULT_QUALITY_HI
="oggenc:-q 7,lame:--preset standard,speex:--quality 9,m4a:"
3107 DEFAULT_QUALITY_XHI
="oggenc:-q 10,lame:--preset extreme,speex:--quality 10,m4a:"
3109 # Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
3110 # Linux/OpenBSD. ftp is user for NetBSD.
3111 # Let's use these checkings to determine the OS flavour, which will be used
3113 if [ X$
(uname
) = "XFreeBSD" ] ; then
3118 elif [ X$
(uname
) = "XDarwin" ] ; then
3121 # We should have disktool in OSX, but let's be sure...
3123 CDROMREADERSYNTAX
=cddafs
3124 elif [ X$
(uname
) = "XOpenBSD" ] ; then
3128 elif [ X$
(uname
) = "XNetBSD" ] ; then
3132 elif [ X$
(uname
) = "SunOS" ] ; then
3140 # If CDDBAVAIL is set to n, no CDDB read is done
3141 # If USEID3 is set to n, no ID3 tagging is done
3147 # But before we get into business, let us chop off any GREP environmental
3152 if [ -z "$OUTPUTDIR" ]; then
3156 if [ -z "$WAVOUTPUTDIR" ]; then
3157 WAVOUTPUTDIR
="$OUTPUTDIR"
3160 # Load system defaults
3161 if [ -r /etc
/abcde.conf
]; then
3164 # Load user preference defaults
3165 if [ -r $HOME/.abcde.conf
]; then
3169 # By this time, we need some HTTPGETOPTS already defined.
3170 # If the user has defined a non-default HTTPGET method, we should not be empty.
3172 if [ "$HTTPGETOPTS" = "" ] ; then
3174 wget
) HTTPGETOPTS
="-q -nv -e timestamping=off -O -";;
3175 curl
) HTTPGETOPTS
="-f -s";;
3176 fetch
)HTTPGETOPTS
="-q -o -";;
3177 ftp) HTTPGETOPTS
="-a -V -o - ";;
3178 *) log warning
"HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
3182 # If the CDROM has not been set yet, find a suitable one.
3183 # If this is a devfs system, default to /dev/cdroms/cdrom0
3184 # instead of /dev/cdrom
3185 if [ "$CDROM" = "" ] ; then
3186 if [ -e /dev
/cdroms
/cdrom0
]; then
3187 CDROM
=/dev
/cdroms
/cdrom0
3188 elif [ -e /dev
/cdrom
]; then
3190 elif [ -e /dev
/cd0c
]; then
3192 elif [ -e /dev
/acd0c
]; then
3194 elif [ -e /dev
/disk1
]; then
3199 # Parse command line options
3200 #while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPq:r:Rs:S:t:T:vVxw:W: opt ; do
3201 while getopts 1a
:bBc
:C
:d
:Defghj
:klLmMnNo
:pPr
:s
:S
:t
:T
:UvVxX
:w
:W
:z opt
; do
3204 a
) ACTIONS
="$OPTARG" ;;
3205 A
) EXPACTIONS
="$OPTARG" ;;
3207 B
) NOBATCHREPLAYGAIN
=y
;;
3208 c
) if [ -e "$OPTARG" ] ; then .
"$OPTARG" ; else log error
"config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
3209 C
) DISCID
="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
3210 d
) CDROM
="$OPTARG" ;;
3213 e
) ERASEENCODEDSTATUS
=y
;;
3214 E
) ENCODING
="$OPTARG" ;;
3218 j
) MAXPROCS
="$OPTARG" ;;
3221 L
) CDDBUSELOCAL
=y
;;
3226 o
) OUTPUTTYPE
="$OPTARG" ;;
3229 q
) QUALITYLEVEL
="$OPTARG" ;;
3230 r
) REMOTEHOSTS
="$OPTARG" ;;
3231 R
) CDDBLOCALRECURSIVE
=y
;;
3232 s
) SHOWCDDBFIELDS
="$OPTARG" ;;
3233 S
) CDSPEEDVALUE
="$OPTARG" ;;
3234 t
) STARTTRACKNUMBER
="$OPTARG" ;;
3235 T
) STARTTRACKNUMBER
="$OPTARG" ; STARTTRACKNUMBERTAG
="y" ;;
3238 echo "This is abcde v$VERSION."
3239 echo "Usage: abcde [options] [tracks]"
3240 echo "abcde -h for extra help"
3243 V
) EXTRAVERBOSE
="y" ;;
3245 X
) CUE2DISCID
="$OPTARG" ;;
3246 w
) COMMENT
="$OPTARG" ;;
3247 W
) if echo $OPTARG |
grep "[[:digit:]]" > /dev
/null
2>&1 ; then
3248 STARTTRACKNUMBER
="${OPTARG}01"
3249 STARTTRACKNUMBERTAG
="y"
3250 COMMENT
="CD${OPTARG}"
3251 DISCNUMBER
="${OPTARG}"
3253 log error
"argument of -W must be integer"
3257 z
) DEBUG
=y
; CDROMREADERSYNTAX
=debug
; EJECTCD
="n" ;;
3262 shift $
(($OPTIND - 1))
3264 # Here it comes the worse part of the whole thing. From here until we start
3265 # ripping, we have a mixture of sanity checks, verifications, default settigs
3266 # and other crazy stuff that interdepends, but hey, someone has to do it.
3268 # If NOCDDBQUERY is set, don't query the CDDB server.
3269 if [ "$NOCDDBQUERY" = "y" ]; then
3273 # If the user specified a flac file, then switch to special flac mode
3274 if echo "$CDROM" |
grep -i '.flac$' > /dev
/null
2>&1 ; then
3275 if [ ! -f "$CDROM" ]; then
3276 log error
"the defined file for FLAC ripping cannot be found" >&2
3279 vecho warning
"switching to flac CDROMREADERSYNTAX..."
3280 CDROMREADERSYNTAX
=flac
3281 # We have a builtin version of cue2discid...
3282 case "$CUE2DISCID" in
3284 *) NEEDCUE2DISCID
=y
;;
3290 # If the user provided a DISCID, disable eject
3291 if [ -n "$DISCID" ] ||
[ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD
=n
; fi
3293 # Check the available cd rippers in the system, from the ones we know.
3294 if [ "$CDROMREADERSYNTAX" = "" ]; then
3295 for DEFAULT_CDROMREADER
in $DEFAULT_CDROMREADERS; do
3296 if new_checkexec
$DEFAULT_CDROMREADER; then
3297 CDROMREADERSYNTAX
=$DEFAULT_CDROMREADER
3301 if [ "$CDROMREADERSYNTAX" = "" ]; then
3302 log error
"no cdreader found in your PATH"
3303 log error
"hints: are all dependencies installed? has the \$PATH been modified?"
3308 # Decide if we can continue.
3309 if [ "$ONETRACK" = "y" ]; then
3310 # FIXME # remove check as soon as we find out about the other readers
3311 case "$CDROMREADERSYNTAX" in
3314 cdda2wav | icedax
) ;;
3315 *) log error
"$CDROMREADERSYNTAX does not support ONETRACK mode"
3318 if [ "$BATCHNORM" = "y" ]; then
3319 log warning
"BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
3322 if [ "$NOGAP" = "y" ]; then
3323 log warning
"NOGAP mode is not compatible with ONETRACK mode. Disabling..."
3326 # It does not matter how many tracks we want. In ONETRACK mode we grab them all
3327 # FIXME # allow ranges of tracks to be selected for onetrack ripping
3328 if [ $# -gt 0 ]; then
3329 log warning
"ONETRACK mode selected, grabbing all tracks..."
3332 while [ $# -gt 0 ]; do
3333 # Range parsing code courtesy of Vincent Ho
3334 # Cleaned up to use shell built-ins by Charles Steinkuehler
3335 if [ "${1#*[^0-9-]}" != "$1" ]; then
3336 log error
"syntax error while processing track numbers"
3340 while [ ${RSTART:=1} -le ${REND:=0} ] ; do
3341 TRACKQUEUE
="$TRACKQUEUE $RSTART"
3342 RSTART
=$
(( $RSTART + 1 ))
3349 # List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
3350 # List of experimental actions: retag,transcode
3352 # Determine what actions are to be done from $ACTIONS and set the
3353 # following environment variables for them:
3365 ## FIXME ## Lets keep compatibility with -M
3366 [ "$DOCUE" != "y" ] && DOCUE
=n
3368 for ACTION
in $
(echo $ACTIONS |
tr , \
)
3371 default
) DOCDDB
=y
; DOREAD
=y
; DOENCODE
=y
; DOTAG
=y
; DOMOVE
=y
; DOCLEAN
=y
;;
3372 cue
) DOCUE
=y
; MAKECUEFILE
=y
;;
3375 normalize
) DONORMALIZE
=y
; DOREAD
=y
;;
3376 # preprocess) DOPREPROCESS=y; DOREAD=y;;
3377 encode
) DOENCODE
=y
; DOREAD
=y
;;
3378 # postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
3379 tag
) DOTAG
=y
; DOREAD
=y
; DOENCODE
=y
; DOCDDB
=y
;;
3380 move
) DOMOVE
=y
; DOTAG
=y
; DOREAD
=y
; DOENCODE
=y
; DOCDDB
=y
;;
3381 replaygain
) DOCDDB
=y
; DOREAD
=y
; DOENCODE
=y
; DOTAG
=y
; DOMOVE
=y
; DOREPLAYGAIN
=y
;;
3382 playlist
) DOCDDB
=y
; DOPLAYLIST
=y
;;
3387 if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
3388 # FIXME # should we abort on error or just inform the user?
3389 log warning
"selected both normalize and replaygain actions"
3392 for SHOWCDDBFIELD
in $
(echo $SHOWCDDBFIELDS |
tr , \
); do
3393 case $SHOWCDDBFIELD in
3394 y
*|Y
*) SHOWCDDBYEAR
="y";;
3395 g
*|G
*) SHOWCDDBGENRE
="y";;
3400 # At this point a CDROM has to be defined, so we check it exists.
3401 if [ X
"$CDROM" != "X" ] ; then
3402 if ( [ "$CDROMREADERSYNTAX" = "cdda2wav" ] ||
[ "$CDROMREADERSYNTAX" = "icedax" ] ) && [ "$NEEDCDROMID" = "y" ] ; then
3403 if [ "$OSFLAVOUR" = "FBSD" ]; then
3404 if echo "$CDROMID" |
grep "^[0-9],[0-9],[0-9]$" >/dev
/null
2>&1 ; then :; else
3405 log error
"CDROMID not in the right format for $CDROMREADERSYNTAX"
3406 log error
"Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
3410 elif [ ! -e "$CDROM" -a X
"$DOREAD" = "Xy" ]; then
3411 log error
"CDROM device cannot be found."
3414 # avoid processing if we are not going to hit the CDROM.
3415 elif [ X
"$DOREAD" = "Xy" ]; then
3416 log error
"CDROM has not been defined or cannot be found"
3420 # USEPIPES pre-tests, before we get into more serious stuff
3421 # Not compatible with:
3422 # - multiple outputs
3424 # - lowdisk algorithm
3426 if [ X
"$USEPIPES" = "Xy" ]; then
3427 if [ $
(echo "$OUTPUTTYPE" |
tr , \ |
wc -w ) -gt 1 ]; then
3428 log error
"Unix pipes not compatible with multiple outputs"
3431 if [ X
"$DONORMALIZE" = "Xy" ]; then
3432 log error
"Unix pipes not compatible with normalizer"
3433 # FIXME # Do we need to exit or shall we just disable the mode?
3436 if [ X
"$BATCHNORM" = "Xy" ]; then
3437 log error
"Unix pipes not compatible with BATCHNORM encoding"
3440 if [ X
"$NOGAP" = "Xy" ]; then
3441 log error
"Unix pipes not compatible with NOGAP encoding"
3444 if [ X
"$DOENCODE" = "Xn" ]; then
3445 vecho warning
"Disabling Unix pipes since we are not encoding!"
3448 if [ X
"$LOWDISK" = "Xy" ]; then
3449 log error
"Unix pipes not compatible with lowdisk algorithm"
3454 # LOWDISK pre-tests, before we get into more problematic stuff
3455 # Not compatible with anything that needs all the files in the hard disc:
3458 if [ X
"$LOWDISK" = "Xy" ]; then
3459 if [ X
"$BATCHNORM" = "Xy" ]; then
3460 log error
"Unix pipes not compatible with BATCHNORM encoding"
3463 if [ X
"$NOGAP" = "Xy" ]; then
3464 log error
"Unix pipes not compatible with NOGAP encoding"
3469 # BATCHNORM pre-tests, before we get into serious problems
3470 # Not compatible with
3471 if [ "$BATCHNORM" = "y" ] && [ "$DONORMALIZE" = "n" ]; then
3472 vecho warning
"Disabling BATCHNORM since we are not normalizing!"
3476 # Check the encoding format from the ones available in the system, if nothing has been configured.
3477 if [ X
"$OUTPUTTYPE" = "X" ]; then
3478 for DEFAULT_OUTPUT
in $
( echo "$DEFAULT_OUTPUT_BINARIES" |
tr , \
); do
3479 DEFAULT_OUTPUT_FORMAT
="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 1)"
3480 DEFAULT_OUTPUT_BINARY
="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 2)"
3481 if [ -x $
(which $DEFAULT_OUTPUT_BINARY) ] ; then
3482 OUTPUTTYPE
=$DEFAULT_OUTPUT_FORMAT
3483 vecho
"No default output type defined. Autoselecting $OUTPUTTYPE..." >&2
3487 if [ X
"$OUTPUTTYPE" = "X" ]; then
3488 log error
"no encoder found in the PATH"
3489 log error
"hints: are all dependencies installed? has the \$PATH been modified?"
3494 # Decide which CDROM reader we're gonna use
3495 case "$CDROMREADERSYNTAX" in
3497 CDROMREADER
="$CDPARANOIA"
3498 CDROMREADEROPTS
="$CDPARANOIAOPTS"
3501 CDROMREADER
="$CDDA2WAV"
3502 CDROMREADEROPTS
="$CDDA2WAVOPTS"
3505 CDROMREADER
="$DAGRAB"
3506 CDROMREADEROPTS
="$DAGRABOPTS"
3509 CDROMREADER
="$CDDAFS"
3510 CDROMREADEROPTS
="$CDDAFSOPTS"
3514 CDROMREADEROPTS
="$FLACOPTS"
3518 # There's only one normalize...
3519 case "$NORMALIZERSYNTAX" in
3521 NORMALIZER
="$NORMALIZE"
3522 NORMALIZEROPTS
="$NORMALIZEOPTS"
3526 # Allow -o OUTPUT(1):OPTIONS(1),...,OUTPUT(N):OPTIONS(N) mode of operation
3527 if echo "$OUTPUTTYPE" |
grep ":" > /dev
/null
2>&1 ; then
3528 for OUTPUT
in "$(echo "$OUTPUTTYPE" | tr \ \|| tr , \ | tr \| \ )"; do
3530 vorbis
:*|ogg
:*) OGGENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3531 mp3
:*) MP3ENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3532 flac
:*) FLACENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3533 spx
:*) SPEEXENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3534 mpc
:*) MPPENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3535 m4a
:*) AACENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3538 for OUTPUT
in "$(echo "$OUTPUTTYPE" | tr , \ )"; do
3539 TEMPOUTPUT
=$
( echo "$OUTPUT" | cut
-d: -f1 )
3540 TEMPOUTPUTTYPE
="${TEMPOUTPUTTYPE:+$TEMPOUTPUTTYPE,}$TEMPOUTPUT"
3542 OUTPUTTYPE
="$TEMPOUTPUTTYPE"
3545 # If nothing has been specified, use oggenc for oggs and lame for mp3s and flac
3546 # for flacs and speexenc for speex and mppenc for mpps and faac for m4as
3548 # Getting ready for multiple output changes
3549 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
3553 [ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX
=oggenc
3554 [ "$DOTAG" = "y" ] && NEEDCOMMENTER
=y
3555 [ "$DOREPLAYGAIN" = "y" ] && NEEDVORBISGAIN
=y
3556 OGGOUTPUTCONTAINER
=ogg
3559 [ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX
=lame
3560 [ "$DOTAG" = "y" ] && NEEDTAGGER
=y
3561 [ "$DOREPLAYGAIN" = "y" ] && NEEDMP3GAIN
=y
3564 [ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX
=flac
3565 [ "$DOTAG" = "y" ] && NEEDMETAFLAC
=y
3566 [ "$DOREPLAYGAIN" = "y" ] && NEEDMETAFLAC
=y
3567 [ "$ONETRACK" = "y" ] && [ "$DOCUE" = "y" ] && NEEDMETAFLAC
=y
3570 [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX
=speexenc
3571 # [ "$DOREPLAYGAIN" = "y" ] &&
3574 [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX
=mppenc
3575 [ "$DOREPLAYGAIN" = "y" ] && NEEDMPPGAIN
=y
3578 [ "$AACENCODERSYNTAX" = "default" ] && AACENCODERSYNTAX
=faac
3579 [ "$DOTAG" = "y" ] && CHECKATOMICPARSLEY
=y
3582 if [ "$KEEPWAVS" = "y" ]; then
3583 vecho
"Setting the KEEPWAVS option, since the resulting wav files were requested..."
3587 *) log error
"Invalid OUTPUTTYPE defined"
3593 # decide which encoder
3594 case "$MP3ENCODERSYNTAX" in
3596 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$LAMEOPTS}"
3600 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$TOOLAMEOPTS}"
3601 MP3ENCODER
="$TOOLAME"
3604 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$GOGOOPTS}"
3608 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$BLADEENCOPTS}"
3609 MP3ENCODER
="$BLADEENC"
3612 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$L3ENCOPTS}"
3616 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$XINGMP3ENCOPTS}"
3617 MP3ENCODER
="$XINGMP3ENC"
3620 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$MP3ENCOPTS}"
3621 MP3ENCODER
="$MP3ENC"
3624 case "$OGGENCODERSYNTAX" in
3626 OGGENCODEROPTS
="${OGGENCODEROPTSCLI:-$VORBIZEOPTS}"
3627 OGGENCODER
="$VORBIZE"
3630 OGGENCODEROPTS
="${OGGENCODEROPTSCLI:-$OGGENCOPTS}"
3631 OGGENCODER
="$OGGENC"
3634 case "$FLACENCODERSYNTAX" in
3636 FLACENCODEROPTS
="${FLACENCODEROPTSCLI:-$FLACOPTS}"
3638 if [ "$DOREPLAYGAIN" = "y" ]; then
3639 FLACENCODEROPTS
="${FLACENCODEROPTS} --replay-gain"
3641 # FLAC streams can be encapsulated on a Ogg transport layer
3642 if echo "$FLACENCODEROPTS" |
egrep -- "(^| )--ogg($| )" > /dev
/null
2>&1 ;then
3643 log error
"FLAC on an Ogg container is not yet supported"
3644 log error
"due to problem with adding comments to such files"
3646 FLACOUTPUTCONTAINER
=ogg
3648 FLACOUTPUTCONTAINER
=flac
3652 case "$SPEEXENCODERSYNTAX" in
3654 SPEEXENCODEROPTS
="${SPEEXENCODEROPTSCLI:-$SPEEXENCOPTS}"
3655 SPEEXENCODER
="$SPEEXENC"
3658 case "$MPPENCODERSYNTAX" in
3660 MPPENCODEROPTS
="${MPPENCODEROPTSCLI:-$MPPENCOPTS}"
3661 MPPENCODER
="$MPPENC"
3664 case "$AACENCODERSYNTAX" in
3666 AACENCODEROPTS
="${AACENCODEROPTSCLI:-$AACENCOPTS}"
3667 AACENCODER
="$AACENC"
3672 if [ "$ID3TAGV" = "1" ]; then
3674 TAGGEROPTS
="$ID3OPTS"
3677 TAGGEROPTS
="$ID3V2OPTS"
3680 # NOGAP is specific to lame. Other encoders fail ...
3681 if [ "$NOGAP" = "y" ] && [ ! "$MP3ENCODER" = "lame" ]; then
3682 log warning
"the NOGAP option is specific to lame. Deactivating..."
3687 case "$CUEREADERSYNTAX" in
3689 CUEREADEROPTS
="${CDROM}"
3694 # which information retrieval tool are we using?
3700 # Check if both OGGEOUTPUTCONTAINER and FLACOUTPUTCONTAINER are the same, and differentiante them
3701 if [ X
"$OGGOUTPUTCONTAINER" = "Xogg" ] && [ X
"$FLACOUTPUTCONTAINER" = "Xogg" ]; then
3702 log error
"FLAC on an Ogg container is not yet supported"
3703 log error
"due to problem with adding comments to such files"
3705 OGGOUTPUTCONTAINER
=ogg.ogg
3706 FLACOUTPUTCONTAINER
=flac.ogg
3707 vecho warning
"modified file endings due to conflicting transport layers in Ogg/Vorbis and Ogg/FLAC"
3710 # Clean up nice options (either use '-n NICELEVEL or -NICELEVEL')
3712 if [ "$ENCNICE" ]; then
3713 ENCNICE
="-n $ENCNICE"
3715 if [ "$READNICE" ]; then
3716 READNICE
="-n $READNICE"
3718 if [ "$DISTMP3NICE" ]; then
3719 DISTMP3NICE
="-n $DISTMP3NICE"
3722 # Don't check for stuff if it's not needed
3723 if [ "$REMOTEHOSTS" ]; then
3726 if [ "$DONORMALIZE" = "y" ]; then
3729 if [ "$EJECTCD" = "y" ]; then
3732 if [ ! "$CDDBAVAIL" = "n" ] && [ "$DOCDDB" = "y" ]; then
3733 if [ "$CDDBMETHOD" = "cddb" ]; then
3735 elif [ "$CDDBMETHOD" = "musicbrainz" ]; then
3739 if [ "$DOCUE" = "y" ]; then
3743 if [ X
"$CDSPEEDVALUE" != "X" ] && [ "$DOREAD" = "y" ]; then
3744 case "$CDROMREADERSYNTAX" in
3745 cdparanoia|debug
) CDROMREADEROPTS
="$CDPARANOIAOPTS -S $CDSPEEDVALUE" ;;
3746 ### FIXME ### translate "cue2discid" from python to bash
3747 flac
) NEEDMETAFLAC
=y
; NEEDCUE2DISCID
=y
; CDSPEEDVALUE
="" ;;
3752 ###USEPIPESSUPPORT###
3754 # Rippers with USEPIPE support
3755 # FIXME # Include here all the rippers we can figure out support pipes
3756 PIPERIPPER_cdparanoia
="-"
3757 PIPERIPPER_debug
="-"
3758 PIPERIPPER_flac
="-c "
3760 # Encoders with USEPIPE support
3761 # FIXME # Include here all the encoders we can figure out support pipes
3767 # Figure out if we can use pipes with the ripper/encoder combination
3769 if [ "$USEPIPES" = "y" ]; then
3770 PIPERIPPERSVARCHECK
="PIPERIPPER_${CDROMREADERSYNTAX}"
3773 PIPEENCODERSVARCHECK
="PIPE_$MP3ENCODERSYNTAX" ;;
3775 PIPEENCODERSVARCHECK
="PIPE_$OGGENCODERSYNTAX" ;;
3777 PIPEENCODERSVARCHECK
="PIPE_$FLACENCODERSYNTAX" ;;
3779 PIPEENCODERSVARCHECK
="PIPE_$SPEEXENCODER" ;;
3781 PIPEENCODERSVARCHECK
="PIPE_$MPPENCODER" ;;
3783 decho
"PIPERIPPERSVARCHECK: $( eval echo "\$
$PIPERIPPERSVARCHECK" )"
3784 if [ "$( eval echo "\$
$PIPERIPPERSVARCHECK" )" = "$" ] || \
3785 [ "$( eval echo "\$
$PIPERIPPERSVARCHECK" )" = "" ] ; then
3786 log error
"no support for pipes with given ripper"
3787 log error
"read the USEPIPES file from the source tarball to get help."
3788 log error
"On a Debian system, it is under /usr/share/doc/abcde/USEPIPES.gz"
3791 decho
"PIPEENCODERSVARCHECK: $( eval echo "\$
$PIPEENCODERSVARCHECK" )"
3792 if [ "$( eval echo "\$
$PIPEENCODERSVARCHECK" )" = "$" ] || \
3793 [ "$( eval echo "\$
$PIPEENCODERSVARCHECK" )" = "" ] ; then
3794 log error
"no support for pipes with given encoder"
3795 log error
"read the USEPIPES file from the source tarball to help"
3796 log error
"on a Debian system, read /usr/share/doc/abcde/USEPIPES.gz"
3801 # Make sure a buncha things exist
3802 for X
in $CDROMREADER $CDDISCID ${NEEDTAGGER+$TAGGER} $MP3ENCODER \
3803 $OGGENCODER $FLACENCODER $SPEEXENCODER $MPPENCODER \
3805 ${NEEDATOMICPARSLEY+$ATOMICPARSLEY} \
3806 ${NEEDHTTPGET+$HTTPGET} ${NEEDDISTMP3+$DISTMP3} \
3807 ${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC} \
3808 ${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT} \
3809 ${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED} \
3810 ${NEEDVORBISGAIN+$VORBISGAIN} ${NEEDMP3GAIN+$MP3GAIN} \
3811 ${NEEDMPPGAIN+$MPPGAIN} ${NEEDCUEREADER+$CUEREADER} \
3812 ${NEEDCUE2DISCID+$CUE2DISCID}
3817 if [ "$CHECKATOMICPARSLEY" = "y" ]; then
3818 if ! new_checkexec
"$ATOMICPARSLEY"; then
3819 echo "WARNING: $ATOMICPARSLEY Not Found Not Post-Tagging!"
3822 echo "Using $ATOMICPARSLEY To Tag AAC Tracks."
3826 # And last but not least, check if we can diff between files. We do not abort,
3827 # since diffing is not critical...
3828 if [ -x $
(which $DIFF) ]; then :; else
3829 vecho warning
"Disabling diff since we cannot find it in the \$PATH..."
3833 ## Now that we have metaflac, check if we need cue2discid
3834 #case $CDROMREADERSYNTAX in
3836 # TRACKINFO=$($METAFLAC --show-tag=CDDB $CDROM | cut -d"=" -f2 | egrep "[a-f0-9]{8}")
3837 # if [ "$TRACKINFO" = "" ]; then
3838 # checkexec ${NEEDCUE2DISCID+$CUE2DISCID}
3843 CDROMREADER
="$CDROMREADER $CDROMREADEROPTS"
3844 CDDBTOOL
="$CDDBTOOL $CDDBTOOLOPTS"
3845 HTTPGET
="$HTTPGET $HTTPGETOPTS"
3847 # Here it used to say:
3848 # One thousand lines in, we can start doing stuff with things
3849 # Well, right now we are at line 3737 ;)
3851 # Export needed things so they can be read in this subshell
3852 export CDDBTOOL ABCDETEMPDIR TRACKQUEUE LOWDISK EJECTCD EJECT EJECTOPTS
3853 export CDROM CDDBDATA REMOTEHOSTS MAXPROCS HTTPGET MD5SUM
3855 if [ "$DOREAD" = "y" ]; then
3856 # User-definable function to set some things. Use it for
3857 # - closing the CD tray with eject -t
3858 # - set the CD speed value with eject -x
3859 vecho
-n "Executing customizable pre-read function... "
3861 pre_read
# Execute the user-defined pre-read funtion. Close the CD with it.
3866 case "$CDDBMETHOD" in
3868 do_discid
# Get ABCDETEMPDIR created and status file initialized
3875 if [ "$DOCDDB" = "y" ]; then
3876 # start with a sane default:
3877 CDDBLOCALSTATUS
=notfound
3878 if [ $CDDBUSELOCAL = "y" ]; then
3881 if checkstatus cddb-choice
> /dev
/null
; then
3884 if [ "$CDDBLOCALSTATUS" = "notfound" ] ; then
3885 case "$CDDBMETHOD" in
3899 eval "$($CDDBTOOL parse "$CDDBDATA")"
3902 # Before reading tracks, we set the speed of the device
3904 if [ X
"$CDSPEEDVALUE" != "X" ]; then
3905 case "$CDROMREADERSYNTAX" in
3906 cdparanoia|debug
) ;;
3912 # Define the first and last track, since we might need them later in several places
3913 FIRSTTRACK
=$
( get_first
$TRACKQUEUE )
3914 LASTTRACK
=$
( get_last
$TRACKQUEUE )
3916 if [ -f "$ABCDETEMPDIR/status" ] && [ X
"$ERASEENCODEDSTATUS" = "Xy" ]; then
3917 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
3918 grep -v ^encodetracklocation-
< "$ABCDETEMPDIR/status.old" \
3919 |
grep -v ^encode-output
> "$ABCDETEMPDIR/status"
3922 if checkstatus onetrack
; then ONETRACK
=y
; fi
3924 if [ "$ONETRACK" = "y" ]; then
3925 # Reuse the CUEFILE in case we created it (now or in a previous run)
3926 if CUEFILE
=$
(checkstatus cuefile
); then
3931 # Create playlist if needed (backgroundable) and start reading in tracks
3935 if [ ! "$ONETRACK" = "y" ]; then
3936 if [ "$DOPLAYLIST" = "y" ]; then
3937 echo Creating playlist...
>&2
3942 # For the lowdisk option, only one program is running at once so the encoder
3943 # can be unsilenced right away.
3944 if [ "$LOWDISK" = "y" ] ||
[ "$ONETRACK" = "y" ]; then
3945 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3948 if [ "$ONETRACK" = "y" ]; then
3949 TRACKS
="$FIRSTTRACK"
3950 if [ "$USEPIPES" = "y" ]; then
3951 if checkstatus readencodetrack-
$FIRSTTRACK; then :; else
3952 do_cdread onetrack
$FIRSTTRACK $LASTTRACK | do_encode
$FIRSTTRACK %local0
% > /dev
/null
2>&1
3955 if checkstatus readtrack-
$FIRSTTRACK; then :; else
3956 do_cdread onetrack
$FIRSTTRACK $LASTTRACK
3960 for UTRACKNUM
in $TRACKQUEUE
3962 if [ "$DOREAD" = "y" ]; then
3963 if [ "$USEPIPES" = "y" ]; then
3964 if checkstatus readencodetrack-
$UTRACKNUM; then :; else
3965 # Read, pipe, shut up!
3966 do_cdread
$UTRACKNUM | do_encode
$UTRACKNUM %local0
% > /dev
/null
2>&1
3969 if checkstatus readtrack-
$UTRACKNUM; then :; else
3970 do_cdread
$UTRACKNUM
3972 if [ "$?" != "0" ]; then
3973 # CD read failed - don't give the goahead to
3980 if [ "$NOGAP" = "y" ] ||
[ "$BATCHNORM" = "y" ]; then
3983 # If we are not reading, set the encode output to loud already, so
3984 # that we can see the output of the first track.
3985 if [ "$MAXPROCS" = "1" ] && [ ! "$DOREAD" = "y" ]; then
3986 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3988 echo NEXTTRACK
# Get the encoder machine churning again
3989 if [ "$DOREAD" = "y" ]; then
3990 if [ "$LOWDISK" = "y" ] && [ "$DOENCODE" = "y" ]; then
3991 until checkstatus encodetrack-
$UTRACKNUM
3993 if checkerrors encodetrack-
$UTRACKNUM; then
4004 # Now that we're done the encoding can be loud again -
4005 # if we're not using SMP.
4006 if [ "$MAXPROCS" = "1" ]; then
4007 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
4010 # All tracks read, start encoding.
4011 if [ "$NOGAP" = "y" ] ||
[ "$BATCHNORM" = "y" ] ||
[ "$ONETRACK" = "y" ]; then
4015 # Execute the user-defined post_read funtion before ejecting CD
4018 # We are now finished with the cdrom - it can be safely ejected. Note that
4019 # abcde will not have completed yet.
4020 if [ "$EJECTCD" = "y" ] && [ -x $
(which $EJECT) ]; then
4021 # We check if the disk we are processing is actually the disk inside the
4022 # CD tray. If not, we do not eject the CD, since it might be so that the
4023 # user ejected it manually.
4024 #CURRENTTRACKINFO=$($CDDISCID $CDROM)
4025 #if if [ "$?" != "1" ] && [ "$CURRENTTRACKINFO" = "$TRACKINFO" ] ; then
4026 # More FreeBSD bits.
4027 if [ X
"$(uname)" = X
"FreeBSD" ] ; then
4028 # FreeBSD eject uses the EJECT environment variable to name the CDROM
4029 # but in this script EJECT is in the envionment and names the program
4032 # The FreeBSD eject needs "adc0" not "/dev/adc0c"
4033 cd="$(echo $CDROM | sed -e 's=.*/==;s=[a-h]$==;')"
4034 $eject $EJECTOPTS $cd
4035 elif [ X
"$(uname)" = X
"Darwin" ] ; then
4036 disktool
-e ${CDROM#/dev/} 0
4038 $EJECT $EJECTOPTS "$CDROM"
4045 ## Do we need to pre-process
4046 #if [ x"$PREPROCESS" = "x" ] ; then
4049 # for PRETRACKNUM in $TRACKQUEUE
4052 # if [ "$GOAHEAD" = "NO" ]; then break; fi
4054 # until [ $PREPROCEED ]
4056 # if checkstatus readtrack-$PRETRACKNUM; then PREPROCEED=y; break; fi
4057 # # all locations are working, wait and try again later
4058 # if [ ! $PREPROCEED ]; then sleep 3; fi
4060 # ( do_preprocess $PRETRACKNUM
4068 # In BATCHNORM and/or NOGAP modes, we want all tracks to be read first.
4070 if [ "$BATCHNORM" = "y" ] ||
[ "$NOGAP" = "y" ]; then
4071 read GOAHEAD
# For blocking - will contain either "NO" or "NEXTTRACK"
4072 if [ "$GOAHEAD" = "NO" ]; then break; fi
4073 for LASTTRACK
in $TRACKQUEUE; do :; done
4074 if checkstatus readtrack-
$LASTTRACK; then
4075 if [ "$DONORMALIZE" = "y" ] && [ "$BATCHNORM" = "y" ]; then
4076 if checkstatus normalizetrack-
$LASTTRACK; then :; else do_batch_normalize
; fi
4077 if checkerrors batch-normalize
; then exit 1; fi
4079 if [ "$DOENCODE" = "y" ] && [ "$NOGAP" = "y" ]; then
4080 if [ "$DONORMALIZE" = "y" ]; then
4081 for UTRACKNUM
in $TRACKQUEUE
4083 if checkstatus readtrack-
$UTRACKNUM; then
4084 if checkstatus normalizetrack-
$UTRACKNUM; then :; else do_normalize
$UTRACKNUM; fi
4088 if checkstatus encodetrack-
$LASTTRACK; then :; else do_nogap_encode
; fi
4089 if checkerrors nogap-encode
; then exit 1; fi
4094 # If we are using ONETRACK, we can proceed with the normal encoding using just the $FIRSTTRACK as TRACKQUEUE
4095 if [ "$ONETRACK" = "y" ] ; then
4096 TRACKQUEUE
="$FIRSTTRACK"
4097 TRACKS
="$FIRSTTRACK"
4100 # Do the encoding, including parallelization of remote encoding
4101 # Figure out where each track is going to be encoded
4102 ENCODELOCATIONS
="$(echo $REMOTEHOSTS | tr , ' ')"
4103 if [ "$MAXPROCS" != "0" ]; then
4104 for NUM
in $
(f_seq_row
1 "$MAXPROCS")
4106 ENCODELOCATIONS
="$ENCODELOCATIONS %local$NUM%"
4110 ENCODELOCATIONS
=$
(echo $ENCODELOCATIONS)
4111 for UTRACKNUM
in $TRACKQUEUE
4114 read GOAHEAD
# For blocking - will contain either "NO" or "NEXTTRACK"
4115 if [ "$GOAHEAD" = "NO" ]; then break; fi
4116 # find out where this track is to be encoded
4117 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
4118 # Make sure we have a place to encode this, if not, exit stage right
4119 if [ -z "$ENCODELOCATIONS" ]; then
4125 for LOCATION
in $ENCODELOCATIONS
4127 PREVIOUSTRACK
="$(checkstatus encodetracklocation-$LOCATION)"
4128 # check first if a track has ever been assigned to this location
4129 if [ -z "$PREVIOUSTRACK" ]; then PROCEED
=y
; break; fi
4130 # If it errored out, rebuild $ENCODELOCATIONS without this location in it
4131 if checkerrors encodetrack-
$PREVIOUSTRACK; then
4132 for TEMPLOCATION
in $ENCODELOCATIONS
4134 if [ "$TEMPLOCATION" != "$LOCATION" ]; then
4135 TEMPENCODELOCATIONS
="$TEMPENCODELOCATIONS $TEMPLOCATION"
4138 ENCODELOCATIONS
=$
(echo $TEMPENCODELOCATIONS)
4143 # We're still here, this location must have been previously assigned,
4144 # and last completed without error - check if it's done with the
4145 # previous track yet
4146 if checkstatus encodetrack-
$PREVIOUSTRACK; then PROCEED
=y
; break; fi
4148 # all locations are working, wait and try again later
4149 if [ ! $PROCEED ]; then sleep 3; fi
4151 # Record the location we're about to encode the next track at
4152 echo "encodetracklocation-$LOCATION=$UTRACKNUM" >> "$ABCDETEMPDIR/status"
4154 # Don't proceed with the rest of the loop if we can't encode
4155 if [ "$ABORT" ]; then continue; fi
4156 ## FIXME ## Add here
4157 ## run_command tagtrack-$OUTPUT-$1 $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
4158 # Set TRACKNUM, TRACKNAME
4159 if [ -e "$CDDBDATA" ]; then
4160 if [ "$ONETRACK" = "y" ]; then
4162 TRACKNUM
="$FIRSTTRACK"
4166 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
4167 getcddbinfo TRACKNAME
4171 # You can't encode a file which needs to be normalized before finishing
4172 # You can't tag a file before it's finished encoding -
4173 # thus all of this is backgrounded together
4175 if [ "$DONORMALIZE" = "y" ]; then
4176 if checkstatus readtrack-
$UTRACKNUM; then
4177 if checkstatus normalizetrack-
$UTRACKNUM; then :; else do_normalize
$UTRACKNUM; fi
4180 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
4181 if checkstatus readtrack-
$UTRACKNUM; then
4182 #if checkstatus encodetrack-$UTRACKNUM; then :; else do_encode $UTRACKNUM $LOCATION; fi
4183 if [ "$DONORMALIZE" = "y" ]; then
4184 if checkstatus normalizetrack-
$UTRACKNUM; then
4185 if checkstatus encodetrack-
$UTRACKNUM; then :; else do_encode
$UTRACKNUM $LOCATION $OUTPUT; fi
4188 if checkstatus encodetrack-
$UTRACKNUM; then :; else do_encode
$UTRACKNUM $LOCATION $OUTPUT; fi
4192 if [ "$DOTAG" = "y" ]; then
4193 if checkstatus encodetrack-
$UTRACKNUM; then
4194 if checkstatus tagtrack-
$UTRACKNUM; then :; else do_tag
$UTRACKNUM; fi
4196 # Lets tag the cue file
4197 if checkstatus cleancuefile
>/dev
/null
; then :; else
4198 if checkstatus cuefile
>/dev
/null
; then
4203 if [ "$DOMOVE" = "y" ]; then
4204 if checkstatus tagtrack-
$UTRACKNUM; then
4205 if checkstatus movetrack-
$UTRACKNUM; then :; else do_move
$UTRACKNUM; fi
4212 # Go through it again and make sure there's no distmp3 stragglers, otherwise
4213 # we'll delete the files they're working on
4214 # Do NOT play ball if there is no ball to play (so ABORT if needed)
4215 ## FIXME ## Check also for files which are encoded using PIPEs.
4216 if [ "$DOENCODE" = "y" ] && [ "$USEPIPES" != "y" ] && [ ! "$ABORT" ]; then
4221 for LOCATION
in $ENCODELOCATIONS
4223 CHECKTRACK
="$(checkstatus encodetracklocation-$LOCATION)"
4224 # "How can he give us a status update, if he's DEAD?"
4225 if checkstatus encodetrack-
$CHECKTRACK; then
4228 # Nothing to see here please go quietly back to your homes
4229 if [ -z "$CHECKTRACK" ]; then continue; fi
4230 # You're still here? Maybe there is something...
4231 if checkstatus encodetrack-
$CHECKTRACK; then :; else PROCEED
= ; break; fi
4234 if [ ! $PROCEED ]; then sleep 5; fi
4237 # If the above didn't catch the stragglers, this will
4239 if [ "$DOREPLAYGAIN" = "y" ]; then
4243 # Execute the user-defined post_encode function before cleaning up
4246 # Check to see if run_command logged any errors
4247 if [ -f "$ABCDETEMPDIR/errors" ]; then
4248 log error
"The following commands failed to run:"
4249 cat "$ABCDETEMPDIR/errors"
4253 if [ "$KEEPWAVS" = "y" ];then
4257 # Check if we have moved all the formats we had previously encoded, if we are not using the FORCE.
4258 if [ "$DOCLEAN" = "y" ] && [ ! "$FORCE" = "y" ]; then
4259 ENCODED_FORMATS
=$
(egrep "^encodetrack-(.{3,6})-(.{1,2})$" "$ABCDETEMPDIR/status" | cut
-d"-" -f2 |
sort -u |
tr '\n' '|')
4260 MOVED_FORMATS
=$
(egrep "^movetrack-output-(.{3,6})$" "$ABCDETEMPDIR/status" | cut
-d"-" -f3 |
sort -u |
tr '\n' '|')
4261 if [ "$ENCODED_FORMATS" != "$MOVED_FORMATS" ]; then
4262 log warning
"The encoded formats does not match with the moved ones"
4263 log warning
"Formats encoded: $( echo $ENCODED_FORMATS | tr "|
" " " )"
4264 log warning
"Formats moved: $( echo $MOVED_FORMATS | tr "|
" " " )"
4265 log warning
"Use \"abcde -a clean -f -C $DISCID\" to force the removal of the remaining data."
4269 if [ "$DOCLEAN" = "y" ]; then
4270 # Wipe all the evidence
4271 # Gimme gimme gimme some more time!
4273 rm -rf "$ABCDETEMPDIR"
4276 echo "Finished. Not cleaning $ABCDETEMPDIR."