changequote([,]))])
-# serial 11 AM_PROG_LIBTOOL
+# serial 4 AM_PROG_LIBTOOL
AC_DEFUN(AM_PROG_LIBTOOL,
[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_RANLIB])
AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AM_PROG_LD])
-AC_REQUIRE([AM_PROG_NM])
-AC_REQUIRE([AC_PROG_LN_S])
+AC_REQUIRE([AC_PROG_RANLIB])
# Always use our own libtool.
LIBTOOL='$(top_builddir)/libtool'
dnl Allow the --disable-shared flag to stop us from building shared libs.
AC_ARG_ENABLE(shared,
[ --enable-shared build shared libraries [default=yes]],
-[if test "$enableval" = no; then
- enable_shared=no
-else
- enable_shared=yes
-fi])
-libtool_shared=
-test "$enable_shared" = no && libtool_shared=" --disable-shared"
-
-dnl Allow the --disable-static flag to stop us from building static libs.
-AC_ARG_ENABLE(static,
-[ --enable-static build static libraries [default=yes]],
-[if test "$enableval" = no; then
- enable_static=no
-else
- enable_static=yes
-fi])
-libtool_static=
-test "$enable_static" = no && libtool_static=" --disable-static"
+test "$enableval" = no && libtool_shared=" --disable-shared",
+libtool_shared=)
-libtool_flags="$libtool_shared$libtool_static"
+libtool_flags="$libtool_shared"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
[case "$host" in
*-*-irix6*)
- ac_save_CFLAGS="$CFLAGS"
- # -n32 always needs to be added to the linker when using GCC.
- test "$ac_cv_prog_gcc" = yes && CFLAGS="$CFLAGS -n32"
- for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
- if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
- LD="${LD-ld} $f"
- fi
- done
- CFLAGS="$ac_save_CFLAGS"
+ # For IRIX 6, ld needs -n32 if cc uses it.
+ if echo " $CC $CFLAGS " | egrep -e '[ ]-n32[ ]' > /dev/null; then
+ LD="${LD-ld} -n32"
+ fi
;;
*-*-sco3.2v5*)
esac]
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" LD="$LD" RANLIB="$RANLIB" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
])
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
- /*) ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[LD=${LD-$ac_prog}
-case "$LD" in
- /*)
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AM_PROG_LD_GNU
-])
-
-AC_DEFUN(AM_PROG_LD_GNU,
-[AC_CACHE_CHECK([whether we are using GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AM_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AM_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[case "$NM" in
-/*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
-*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb:$PATH:/bin; do
- test -z "$ac_dir" && dir=.
- if test -f $ac_dir/nm; then
- # Check to see if the nm accepts a BSD-compat flag.
- if ($ac_dir/nm -B /dev/null 2>&1; exit 0) | grep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- elif ($ac_dir/nm -p /dev/null 2>&1; exit 0) | grep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- else
- ac_cv_path_NM="$ac_dir/nm"
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
- ;;
-esac])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
-])
-
dnl
dnl CY_AC_WITH_THREADS determines which thread library the user intends
dnl to put underneath guile. Pass it the path to find the guile top-level
HCoop / bpt / guile.git / commitdiff