2008-07-16 Dan Nicolaescu <dann@ics.uci.edu>
+ * m/ibms390.h:
+ * m/intel386.h:
+ * m/m68k.h:
+ * s/bsd-common.h:
+ * s/cygwin.h:
+ * s/darwin.h:
+ * s/freebsd.h:
+ * s/gnu.h:
+ * s/msdos.h: Remove boilerplate comments.
+
* m/iris4d.h: Remove boilerplate comments and code for systems that
do not use this file.
(IRIS_4D): Remove, unused.
#define LOAD_AVE_CVT(x) (int) (((double) (x)) * 100.0 / FSCALE)
-/* Define CANNOT_DUMP on machines where unexec does not work.
- Then the function dump-emacs will not be defined
- and temacs will do (load "loadup") automatically unless told otherwise. */
-
-/* #define CANNOT_DUMP */
-
/* Define VIRT_ADDR_VARIES if the virtual addresses of
pure and impure space as loaded can vary, and even their
relative order cannot be relied on.
isc2-2, 386-ix, and linux.
18.58 should support a wide variety of operating systems.
- Use isc2-2 for Interactive 386/ix version 2.2.
- Use 386ix for prior versions.
Use linux for Linux.
It isn't clear what to do on an SCO system.
- -machine=is386 is used for an Integrated Solutions 386 machine.
- It may also be correct for Microport systems.
-
-Cubix QBx/386 (-machine=intel386 -opsystem=usg5-3)
-
- Changes merged in 19.1. Systems before 2/A/0 may fail to compile etags.c
- due to a compiler bug.
-
-Prime EXL (-machine=intel386 -opsystem=usg5-3)
-
- Minor changes merged in 19.1.
NOTE-END */
/* Define WORDS_BIG_ENDIAN if lowest-numbered byte in a word
#define DOT_GLOBAL_START
-#ifdef SOLARIS2
/* Data type of load average, as read out of kmem. */
#define LOAD_AVE_TYPE long
/* This is totally uncalibrated. */
#define LOAD_AVE_CVT(x) ((int) (((double) (x)) * 100.0 / FSCALE))
+#ifdef SOLARIS2
/* J.W.Hawtin@lut.ac.uk say Solaris 2.4 as well as Solaris 2.1 on X86
requires -lkvm as well.
And handa@etl.gov.jp says that -lkvm needs -llelf, at least on 2.5. */
#define LIBS_MACHINE -lkvm -lelf
-
/* configure thinks solaris X86 has gethostname, but it does not work,
so undefine it. */
#undef HAVE_GETHOSTNAME
-
#else /* not SOLARIS2 */
#ifdef USG5_4 /* Older USG systems do not support the load average. */
-/* Data type of load average, as read out of kmem. */
-
-#define LOAD_AVE_TYPE long
-
-/* Convert that into an integer that is 100 for a load average of 1.0 */
-/* This is totally uncalibrated. */
-
-#define LOAD_AVE_CVT(x) ((int) (((double) (x)) * 100.0 / FSCALE))
#define FSCALE 256.0
#endif
#endif /* not SOLARIS2 */
-/* Define CANNOT_DUMP on machines where unexec does not work.
- Then the function dump-emacs will not be defined
- and temacs will do (load "loadup") automatically unless told otherwise. */
-
-/* #define CANNOT_DUMP */
-
-/* Define VIRT_ADDR_VARIES if the virtual addresses of
- pure and impure space as loaded can vary, and even their
- relative order cannot be relied on.
-
- Otherwise Emacs assumes that text space precedes data space,
- numerically. */
-
-/* #define VIRT_ADDR_VARIES */
-
/* this brings in alloca() if we're using cc */
#ifdef USG
#ifndef LIB_STANDARD
#ifdef USG5_4
#define LIB_STANDARD -lc
+#define DATA_SEG_BITS 0x08000000
#else /* not USG5_4 */
#define LIB_STANDARD -lPW -lc
#endif /* not USG5_4 */
#define TEXT_START 0
#endif /* USG */
-#ifdef USG5_4
-#define DATA_SEG_BITS 0x08000000
-#endif
-
#ifdef MSDOS
#define NO_REMAP
#endif
#define EXPLICIT_SIGN_EXTEND
-/* Define CANNOT_DUMP on machines where unexec does not work.
- Then the function dump-emacs will not be defined
- and temacs will do (load "loadup") automatically unless told otherwise. */
-
-/* #define CANNOT_DUMP */
-
/* Define VIRT_ADDR_VARIES if the virtual addresses of
pure and impure space as loaded can vary, and even their
relative order cannot be relied on.
#define SYSTEM_TYPE "berkeley-unix"
-/* nomultiplejobs should be defined if your system's shell
- does not have "job control" (the ability to stop a program,
- run some other program, then continue the first one). */
-
-/* #define NOMULTIPLEJOBS */
-
/* Do not use interrupt_input = 1 by default, because in 4.3
we can make noninterrupt input work properly. */
#define HAVE_SOCKETS
-/*
- * Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- * The 4.2 opendir, etc., library functions.
- */
-
-/* #define NONSYSTEM_DIR_LIBRARY */
-
/* Define this symbol if your system has the functions bcopy, etc. */
#define BSTRING
#define subprocesses
-/* If your system uses COFF (Common Object File Format) then define the
- preprocessor symbol "COFF". */
-
-/* #define COFF */
-
/* define MAIL_USE_FLOCK if the mailer uses flock
to interlock access to /usr/spool/mail/$USER.
The alternative is that a lock file named
#define TERMINFO
#define HAVE_SOCKETS
-/* C-g aborts emacs without this */
-/*#define HAVE_VFORK*/
/* Xaw3d causes problems -- might have been fixed by NARROWPROTO
above, but I haven't tried it */
/*#undef HAVE_XAW3D*/
#define BSD4_2
/* BSD4_3 and BSD4_4 are already defined in sys/param.h */
-/* #define BSD4_3 */
-/* #define BSD4_4 */
#define BSD_SYSTEM
/* #define VMS */
#define SYSTEM_TYPE "darwin"
-/* NOMULTIPLEJOBS should be defined if your system's shell
- does not have "job control" (the ability to stop a program,
- run some other program, then continue the first one). */
-
-/* #define NOMULTIPLEJOBS */
-
/* Emacs can read input using SIGIO and buffering characters itself,
or using CBREAK mode and making C-g cause SIGINT.
The choice is controlled by the variable interrupt_input.
*/
#define MIN_PTY_KERNEL_VERSION '7'
-/*
- * Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- * The 4.2 opendir, etc., library functions.
- */
-
-/* #define NONSYSTEM_DIR_LIBRARY */
-
/* Define this symbol if your system has the functions bcopy, etc. */
#define BSTRING
#define subprocesses
-/* If your system uses COFF (Common Object File Format) then define the
- preprocessor symbol "COFF". */
-
-/* #define COFF */
-
/* define MAIL_USE_FLOCK if the mailer uses flock
to interlock access to /usr/spool/mail/$USER.
The alternative is that a lock file named
#define CLASH_DETECTION
-/* Define this if your operating system declares signal handlers to
- have a type other than the usual. `The usual' is `void' for ANSI C
- systems (i.e. when the __STDC__ macro is defined), and `int' for
- pre-ANSI systems. If you're using GCC on an older system, __STDC__
- will be defined, but the system's include files will still say that
- signal returns int or whatever; in situations like that, define
- this to be what the system's include files want. */
-/* #define SIGTYPE int */
-
-/* If the character used to separate elements of the executable path
- is not ':', #define this to be the appropriate character constant. */
-/* #define SEPCHAR ':' */
-
-/* Define this if the system can use mmap for buffer text allocation. */
-/* #define USE_MMAP_FOR_BUFFERS 1 */
-
/* ============================================================ */
/* Here, add any special hacks needed
your system and must be used only through an encapsulation
(Which you should place, by convention, in sysdep.c). */
-/* Some compilers tend to put everything declared static
- into the initialized data area, which becomes pure after dumping Emacs.
- On these systems, you must #define static as nothing to foil this.
- Note that emacs carefully avoids static vars inside functions. */
-
-/* #define static */
-
-/* If the system's imake configuration file defines `NeedWidePrototypes'
- as `NO', we must define NARROWPROTO manually. Such a define is
- generated in the Makefile generated by `xmkmf'. If we don't
- define NARROWPROTO, we will see the wrong function prototypes
- for X functions taking float or double parameters. */
-
-/* #define NARROWPROTO 1 */
-
/* ============================================================ */
/* After adding support for a new system, modify the large case
ioctl TIOCSCTTY. */
#define DONT_REOPEN_PTY
-/* CLASH_DETECTION is defined in bsd-common.h.
- In FreeBSD 2.1.5 (and other 2.1.x), this results useless symbolic links
- remaining in /tmp or other directories with +t bit.
- To avoid this problem, you could #undef it to use no file lock. */
-/* #undef CLASH_DETECTION */
-
/* If the system's imake configuration file defines `NeedWidePrototypes'
as `NO', we must define NARROWPROTO manually. Such a define is
generated in the Makefile generated by `xmkmf'. If we don't
#undef SYSTEM_TYPE
#define SYSTEM_TYPE "gnu"
-/* XXX should getloadavg be in libc? Should we have a libutil?
-#define HAVE_GETLOADAVG */
#undef NLIST_STRUCT
#undef KERNEL_FILE
#undef LDAV_SYMBOL
#define NOMULTIPLEJOBS
-/* Emacs can read input using SIGIO and buffering characters itself,
- or using CBREAK mode and making C-g cause SIGINT.
- The choice is controlled by the variable interrupt_input.
- Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO)
-
- SIGIO can be used only on systems that implement it (4.2 and 4.3).
- CBREAK mode has two disadvantages
- 1) At least in 4.2, it is impossible to handle the Meta key properly.
- I hear that in system V this problem does not exist.
- 2) Control-G causes output to be discarded.
- I do not know whether this can be fixed in system V.
-
- Another method of doing input is planned but not implemented.
- It would have Emacs fork off a separate process
- to read the input and send it to the true Emacs process
- through a pipe.
-*/
-
-/* #define INTERRUPT_INPUT */
-
-/* Letter to use in finding device name of first pty,
- if system supports pty's. 'a' means it is /dev/ptya0 */
-
-/* #define FIRST_PTY_LETTER 'a' */
-
-/*
- * Define HAVE_PTYS if the system supports pty devices.
- */
-
-/* #define HAVE_PTYS */
-
-/*
- * Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- * The 4.2 opendir, etc., library functions.
- */
-
-/* #define NONSYSTEM_DIR_LIBRARY */
-
#define SYSV_SYSTEM_DIR
/* Define this symbol if your system has the functions bcopy, etc. */
#define COFF
-/* define MAIL_USE_FLOCK if the mailer uses flock
- to interlock access to /usr/spool/mail/$USER.
- The alternative is that a lock file named
- /usr/spool/mail/$USER.lock. */
-
-/* #define MAIL_USE_FLOCK */
-
-/* Define CLASH_DETECTION if you want lock files to be written
- so that Emacs can tell instantly when you try to modify
- a file that someone else has modified in his Emacs. */
-
-/* #define CLASH_DETECTION */
-
/* Here, on a separate page, add any special hacks needed
to make Emacs work on this system. For example,
you might define certain system call names that don't
HCoop / bpt / emacs.git / commitdiff